summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-06-06arm64: dts: qcom: add initial device-tree for Microsoft Surface DuoFelipe Balbi
Microsoft Surface Duo is based on SM8150 chipset. This new Device Tree is a copy of sm8150-mtp with a the addition of the volume up key and relevant i2c nodes. Signed-off-by: Felipe Balbi <felipe.balbi@microsoft.com> Link: https://lore.kernel.org/r/20210603122923.1919624-1-balbi@kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-06-06arm64: dts: qcom: sdm845-mtp: enable IPAAlex Elder
Enable IPA on the SDM845 MTP. Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20200519123258.29228-1-elder@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-06-06arm64: dts: qcom: sc7180: SD-card GPIO pin set bias-pull upSujit Kautkar
Some SC7180 based boards do not have external pull-up for cd-gpio. Set this pin to internal pull-up for sleep config to avoid frequent regulator toggle events. Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Sujit Kautkar <sujitka@chromium.org> Link: https://lore.kernel.org/r/20210602121313.v3.2.I52f30ddfe62041b7e6c3c362f0ad8f695ac28224@changeid Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-06-06arm64: dts: qcom: sc7180: Move sdc pinconf to board specific DT filesSujit Kautkar
Move sdc1/sdc2 pinconf from SoC specific DT file to board specific DT files Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Sujit Kautkar <sujitka@chromium.org> Link: https://lore.kernel.org/r/20210602121313.v3.1.Ia83c80aec3b9535f01441247b6c3fb6f80b0ec7f@changeid Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-06-05arm64: dts: qcom: msm8916-samsung-a2015: Add NFCStephan Gerhold
The Samsung Galaxy A3/A5 both have a Samsung S3FWRN5 NFC chip that works quite well with the s3fwrn5 driver in the Linux NFC subsystem. The clock setup for the NFC chip is a bit special (although this seems to be a common approach used for Qualcomm devices with NFC): The NFC chip has an output GPIO that is asserted whenever the clock is needed to function properly. On the A3/A5 this is wired up to PM8916 GPIO2, which is then configured with a special function (NFC_CLK_REQ or BB_CLK2_REQ). Enabling the rpmcc RPM_SMD_BB_CLK2_PIN clock will then instruct PM8916 to automatically enable the clock whenever the NFC chip requests it. The advantage is that the clock is only enabled when needed and we don't need to manage it ourselves from the NFC driver. Note that for some reason Samsung decided to connect the I2C pins to GPIOs where no hardware I2C bus is available, so we need to fall back to software bit-banging with i2c-gpio. Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20210604172742.10593-5-stephan@gerhold.net Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-06-05arm64: dts: qcom: msm8916-samsung-a2015: Add rt5033 batteryStephan Gerhold
The Samsung Galaxy A3/A5 use a Richtek RT5033 PMIC as battery fuel gauge, charger, flash LED and for some regulators. For now, only add the fuel gauge/battery device to the device tree, so we can check the remaining battery percentage. The other RT5033 drivers need some more work first before they can be used properly. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20210604172742.10593-4-stephan@gerhold.net Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-06-05arm64: dts: qcom: msm8916-samsung-a5u: Add touch key regulatorStephan Gerhold
On the Samsung Galaxy A5 the touch key is supplied by a single fixed regulator (enabled via GPIO 97) that supplies both MCU and LED. Add it to the device tree. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20210604172742.10593-3-stephan@gerhold.net Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-06-05arm64: dts: qcom: msm8916-samsung-a3u: Add touch key regulatorsMichael Srba
The touch key MCU and LED is supplied by two separate fixed regulators that can be enabled through GPIO 86 and 60. Add them to the device tree. Signed-off-by: Michael Srba <Michael.Srba@seznam.cz> [stephan: extend commit message] Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20210604172742.10593-2-stephan@gerhold.net Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-06-05arm64: dts: qcom: msm8916-samsung-a2015: Add touch keyStephan Gerhold
The Samsung Galaxy A3/A5 both have two capacitive touch keys, connected to an ABOV MCU. It implements the same interface as implemented by the tm2-touchkey driver and works just fine with the coreriver,tc360-touchkey compatible. It's probably actually some Samsung-specific interface that they implement with different MCUs. Note that for some reason Samsung decided to connect this to GPIOs where no hardware I2C bus is available, so we need to fall back to software bit-banging using i2c-gpio. The vdd/vcc-supply is board-specific and will be added separately for a3u/a5u. Co-developed-by: Michael Srba <Michael.Srba@seznam.cz> Signed-off-by: Michael Srba <Michael.Srba@seznam.cz> Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20210604172742.10593-1-stephan@gerhold.net Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-06-05arm64: dts: qcom: pm6150: Add thermal zone for PMIC on-die temperatureMatthias Kaehlcke
Add a thermal zone for the pm6150 on-die temperature. The system should try to shut down orderly when the temperature reaches the critical trip point at 115°C, otherwise the PMIC will perform a HW power off at 145°C. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20210603081215.v2.1.Id4510e9e4baaa3f6c9fdd5cdf4d8606e63c262e3@changeid Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-06-01arm64: dts: qcom: sc7180: add label for secondary mi2sJudy Hsiao
Adds label for MI2S secondary block to allow follower projects to override for the four speaker support which uses I2S SD1 line on gpio52 pin. Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Judy Hsiao <judyhsiao@chromium.org> Link: https://lore.kernel.org/r/20210601022117.4071117-1-judyhsiao@chromium.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-31arm64: dts: qcom: sc7280: Add "google,senor" to the compatibleRajendra Nayak
The sc7280 IDP board is also called senor in the Chrome OS builds. Add the "google,senor" compatible so coreboot/depthcharge knows what device tree blob to pick Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Link: https://lore.kernel.org/r/1619674827-26650-2-git-send-email-rnayak@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-31dt-bindings: arm: qcom: Document google,senor boardRajendra Nayak
Document the google,senor board based on sc7280 SoC Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Link: https://lore.kernel.org/r/1619674827-26650-1-git-send-email-rnayak@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-31arm64: dts: qcom: sc7280: Add nodes to boot WPSSSibi Sankar
Add miscellaneous nodes to boot the Wireless Processor Subsystem (WPSS) on SC7280 SoCs. Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/1619508824-14413-6-git-send-email-sibis@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-31dt-bindings: mailbox: Add WPSS client index to IPCCSibi Sankar
Add WPSS remote processor client index to Inter-Processor Communication Controller (IPCC) block. Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Sibi Sankar <sibis@codeaurora.org> Link: https://lore.kernel.org/r/1619508824-14413-2-git-send-email-sibis@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-31arm64: dts: qcom: sc7180: Move rmtfs memory regionSujit Kautkar
Move rmtfs memory region so that it does not overlap with system RAM (kernel data) when KAsan is enabled. This puts rmtfs right after mba_mem which is not supposed to increase beyond 0x94600000 Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Signed-off-by: Sujit Kautkar <sujitka@chromium.org> Link: https://lore.kernel.org/r/20210514113430.1.Ic2d032cd80424af229bb95e2c67dd4de1a70cb0c@changeid Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-31arm64: dts: qcom: sc7280: Add clock controller nodesTaniya Das
Add support for the video, gpu, display, lpass clock controller device nodes for SC7280 SoC. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lore.kernel.org/r/1618020280-5470-3-git-send-email-tdas@codeaurora.org [bjorn: Dropped includes, as they are not present in v5.13-rc1] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-31arm64: dts: qcom: sc7280: Add cpufreq hw nodeTaniya Das
Add cpufreq HW device node to scale 4-Silver/3-Gold/1-Gold+ cores on SC7280 SoCs. Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lore.kernel.org/r/1618020280-5470-2-git-send-email-tdas@codeaurora.org [bjorn: Dropped reg-names] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-31arm64: dts: qcom: sc7180: coachz: Add thermal config for skin temperatureMatthias Kaehlcke
Add ADC and thermal monitor configuration for skin temperature, plus a thermal zone that monitors the skin temperature and uses the big cores as cooling devices. CoachZ rev1 is stuffed with an incompatible thermistor for the skin temperature, disable the thermal zone for rev1 to avoid the use of bogus temperature values. Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20210414111007.v1.1.I1a438604a79025307f177347d45815987b105cb5@changeid Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-31arm64: dts: qcom: sc7180: Fix sc7180-qmp-usb3-dp-phy reg sizesDouglas Anderson
As per Dmitry Baryshkov [1]: a) The 2nd "reg" should be 0x3c because "Offset 0x38 is USB3_DP_COM_REVISION_ID3 (not used by the current driver though)." b) The 3rd "reg" "is a serdes region and qmp_v3_dp_serdes_tbl contains registers 0x148 and 0x154." I think because the 3rd "reg" is a serdes region we should just use the same size as the 1st "reg"? [1] https://lore.kernel.org/r/ee5695bb-a603-0dd5-7a7f-695e919b1af1@linaro.org Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Cc: Stephen Boyd <swboyd@chromium.org> Cc: Jeykumar Sankaran <jsanka@codeaurora.org> Cc: Chandan Uddaraju <chandanu@codeaurora.org> Cc: Vara Reddy <varar@codeaurora.org> Cc: Tanmay Shah <tanmay@codeaurora.org> Cc: Rob Clark <robdclark@chromium.org> Fixes: 58fd7ae621e7 ("arm64: dts: qcom: sc7180: Update dts for DP phy inside QMP phy") Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20210315103836.1.I9a97120319d43b42353aeac4d348624d60687df7@changeid Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-31arm64: dts: qcom: sm8250: fix display nodesJonathan Marek
Use sm8250 compatibles instead of sdm845 compatibles Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Jonathan Marek <jonathan@marek.ca> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210329120051.3401567-5-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-31arm64: dts: qcom: c630: Add no-hpd to DSI bridge nodeStephen Boyd
We should indicate that we're not using the HPD pin on this device, per the binding document. Otherwise if code in the future wants to enable HPD in the bridge when this property is absent we'll be enabling HPD when it isn't supposed to be used. Presumably this board isn't using hpd on the bridge. Reviewed-by: Douglas Anderson <dianders@chromium.org> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Douglas Anderson <dianders@chromium.org> Cc: Steev Klimaszewski <steev@kali.org> Fixes: 956e9c85f47b ("arm64: dts: qcom: c630: Define eDP bridge and panel") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20210324231424.2890039-1-swboyd@chromium.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-31arm64: dts: qcom: Harmonize DWC USB3 DT nodes nameSerge Semin
In accordance with the DWC USB3 bindings the corresponding node name is suppose to comply with the Generic USB HCD DT schema, which requires the USB nodes to have the name acceptable by the regexp: "^usb(@.*)?" . Make sure the "snps,dwc3"-compatible nodes are correctly named. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210324204836.29668-8-Sergey.Semin@baikalelectronics.ru Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-31arm64: dts: qcom: trogdor: Add no-hpd to DSI bridge nodeStephen Boyd
We should indicate that we're not using the HPD pin on this device, per the binding document. Otherwise if code in the future wants to enable HPD in the bridge when this property is absent we'll be wasting power powering hpd when we don't use it on trogdor boards. We didn't notice this before because the kernel driver blindly disables hpd, but that won't be true for much longer. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Cc: Douglas Anderson <dianders@chromium.org> Fixes: 7ec3e67307f8 ("arm64: dts: qcom: sc7180-trogdor: add initial trogdor and lazor dt") Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20210324025534.1837405-1-swboyd@chromium.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-31arm64: dts: qcom: msm8994-angler: Fix gpio-reserved-ranges 85-88Petr Vorel
Reserve GPIO pins 85-88 as these aren't meant to be accessible from the application CPUs (causes reboot). Yet another fix similar to 9134586715e3, 5f8d3ab136d0, which is needed to allow angler to boot after 3edfb7bd76bd ("gpiolib: Show correct direction from the beginning"). Fixes: feeaf56ac78d ("arm64: dts: msm8994 SoC and Huawei Angler (Nexus 6P) support") Signed-off-by: Petr Vorel <petr.vorel@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210415193913.1836153-1-petr.vorel@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-31arm64: dts: qcom: msm8996: Make CPUCC actually probe (and work)Konrad Dybcio
Fix the compatible to make the driver probe and tell the driver where to look for the "xo" clock to make sure everything works. Then we get a happy (eh, happier) 8996: somainline-sdcard:/home/konrad# cat /sys/kernel/debug/clk/pwrcl_pll/clk_rate 1152000000 Don't backport without "arm64: dts: qcom: msm8996: Add CPU opps", as the system fails to boot without consumers for these clocks. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210527192958.775434-1-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-31arm64: dts: qcom: msm8996: Add CPU oppsLoic Poulain
Add the operating points capabilities of the kryo CPUs, that can be used for frequency scaling. There are two differents operating point tables, one for the big cluster and one for the LITTLE cluster. This frequency scaling support can then be used as a passive cooling device (cpufreq cooling device). Only add nominal fmax for now, since there is no dynamic control of VDD APC (s11..) which is statically set at its nominal value. Original patch link: https://patchwork.kernel.org/project/linux-arm-msm/patch/1595253740-29466-6-git-send-email-loic.poulain@linaro.org/ Signed-off-by: Loic Poulain <loic.poulain@linaro.org> [konrad: drop the thermals part, rebase and remove spaces within <>] Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210527194455.782108-2-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-31arm64: dts: qcom: sc7180: Add CoachZ rev3Matthias Kaehlcke
CoachZ rev3 uses a 100k NTC thermistor for the charger temperatures, instead of the 47k NTC that is stuffed in earlier revisions. Add .dts files for rev3. The 47k NTC currently isn't supported by the PM6150 ADC driver. Disable the charger thermal zone for rev1 and rev2 to avoid the use of bogus temperature values. This also gets rid of the explicit DT files for rev2 and handles rev2 in the rev1 .dts instead. There was some back and forth downstream involving the 'dmic_clk_en' pin, after that was sorted out the DT for rev1 and rev2 is the same. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20210322094628.v4.3.I95b8a63103b77cab6a7cf9c150f0541db57fda98@changeid Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-31arm64: dts: qcom: sc7180: Add pompom rev3Matthias Kaehlcke
The only kernel visible change with respect to rev2 is that pompom rev3 changed the charger thermistor from a 47k to a 100k NTC to use a thermistor which is supported by the PM6150 ADC driver. Disable the charger thermal zone for pompom rev1 and rev2 to avoid the use of bogus temperature values from the unsupported thermistor. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20210322094628.v4.2.I4138c3edee23d1efa637eef51e841d9d2e266659@changeid Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-31arm64: dts: qcom: sc7180: lazor: Simplify disabling of charger thermal zoneMatthias Kaehlcke
Commit f73558cc83d1 ("arm64: dts: qcom: sc7180: Disable charger thermal zone for lazor") disables the charger thermal zone for specific lazor revisions due to an unsupported thermistor type. The initial idea was to disable the thermal zone for older revisions and leave it enabled for newer ones that use a supported thermistor. Finally the thermistor won't be changed on newer revisions, hence the thermal zone should be disabled for all lazor (and limozeen) revisions. Instead of disabling it per revision do it once in the shared .dtsi for lazor. Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20210322094628.v4.1.I6d587e7ae72a5a47253bb95dfdc3158f8cc8a157@changeid Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-31arm64: dts: qcom: sc7180: Remove QUP-CORE ICC pathRoja Rani Yarubandi
We had introduced the QUP-CORE ICC path to put proxy votes from QUP wrapper on behalf of earlycon, if other users of QUP-CORE turn off this clock before the real console is probed, unclocked access to HW was seen from earlycon. With ICC sync state support proxy votes are no longer need as ICC will ensure that the default bootloader votes are not removed until all it's consumer are probed. We can safely remove ICC path for QUP-CORE clock from QUP wrapper device. Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org> Signed-off-by: Akash Asthana <akashast@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/20210324101836.25272-3-rojay@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-31arm64: dts: qcom: sm8350: fix the node unit addressesVinod Koul
Some node unit addresses were put wrongly in the dts, resulting in below warning when run with W=1 arch/arm64/boot/dts/qcom/sm8350.dtsi:693.34-702.5: Warning (simple_bus_reg): /soc@0/thermal-sensor@c222000: simple-bus unit address format error, expected "c263000" arch/arm64/boot/dts/qcom/sm8350.dtsi:704.34-713.5: Warning (simple_bus_reg): /soc@0/thermal-sensor@c223000: simple-bus unit address format error, expected "c265000" arch/arm64/boot/dts/qcom/sm8350.dtsi:1180.32-1185.5: Warning (simple_bus_reg): /soc@0/interconnect@90e0000: simple-bus unit address format error, expected "90c0000" Fix by correcting to the correct address as given in reg node Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20210513060733.382420-1-vkoul@kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-31arm64: dts: qcom: sm8350: use interconnect enumsVinod Koul
Add interconnect enums instead of numbers now that interconnect is in mainline. Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20210513060705.382184-1-vkoul@kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-31arm64: dts: qcom: sm8150: Add DMA nodesFelipe Balbi
With this patch, DMA has a chance of probing and doing something useful. Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Felipe Balbi <felipe.balbi@microsoft.com> Link: https://lore.kernel.org/r/20210417061951.2105530-3-balbi@kernel.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-31arm64: dts: qcom: msm8916-alcatel-idol347: enable touchscreenVincent Knecht
Enable the MStar msg2638 touchscreen. Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org> Link: https://lore.kernel.org/r/20210528114345.543761-1-vincent.knecht@mailoo.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-31arm64: dts: qcom: msm8996: Rename speedbin nodeLoic Poulain
The speedbin value blown in the efuse is used to determine is used to determine the voltage and frequency value for different IPs, including GPU, CPUs... So it's really not a gpu specific information. This patch simply renames 'gpu_speed_bin' node to 'speedbin'. Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210527194455.782108-1-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-31arm64: dts: qcom: ipq8074: disable USB phy by defaultRobert Marko
One of the QUSB USB PHY-s has been left enabled by default, this is probably just a mistake as other USB PHY-s are disabled by default. It makes no sense to have it enabled by default as not all board implement USB ports, so disable it. Reviewed-by: Kathiravan T <kathirav@codeaurora.org> Signed-off-by: Robert Marko <robimarko@gmail.com> Link: https://lore.kernel.org/r/20210526150125.1816335-1-robimarko@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-25arm64: dts: qcom: msm8996: Add DMA to QUPs and UARTsKonrad Dybcio
Add BAM DMA nodes and add required properties to devices to enable DMA operations. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210525200246.118323-5-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-25arm64: dts: qcom: msm8996: Strictly limit USB2 host to USB2 speedsKonrad Dybcio
As the name implies, the USB2 controller should only operate at USB2 speeds. Make sure it does just that by pinning it to USB High-Speed (USB2) mode. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Link: https://lore.kernel.org/r/20210525200246.118323-3-konrad.dybcio@somainline.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-25arm64: dts: qcom: sc7280: Add ADC channel nodes for PMIC temperatures to ↵satya priya
sc7280-idp Add channel nodes for the on die temperatures of PMICS pmk8350, pm8350, pmr735a and pmr735b. Signed-off-by: satya priya <skakit@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/1621937466-1502-11-git-send-email-skakit@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-25arm64: dts: qcom: sc7280: Include PMIC DT files for sc7280-idpsatya priya
The sc7280-idp has four PMICs, include their .dtsi files. Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: satya priya <skakit@codeaurora.org> Link: https://lore.kernel.org/r/1621937466-1502-10-git-send-email-skakit@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-25arm64: dts: qcom: pmk8350: Correct the GPIO nodesatya priya
Add gpio ranges and correct the compatible to add "qcom,spmi-gpio" as this pmic is on spmi bus. Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: satya priya <skakit@codeaurora.org> Link: https://lore.kernel.org/r/1621937466-1502-9-git-send-email-skakit@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-25arm64: dts: qcom: pmk8350: Add peripherals for pmk8350satya priya
Add PON, RTC, VADC and ACD_TM support for PMK8350. Signed-off-by: satya priya <skakit@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/1621937466-1502-8-git-send-email-skakit@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-25arm64: dts: qcom: pmr735a: Correct the GPIO nodesatya priya
Add gpio ranges and correct the compatible to add "qcom,spmi-gpio" as this pmic is on spmi bus. Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: satya priya <skakit@codeaurora.org> Link: https://lore.kernel.org/r/1621937466-1502-7-git-send-email-skakit@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-25arm64: dts: qcom: pmr735a: Add temp-alarm supportsatya priya
Add temp-alarm support for PMR735A pmic. Signed-off-by: satya priya <skakit@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/1621937466-1502-6-git-send-email-skakit@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-25arm64: dts: qcom: pm8350c: Correct the GPIO nodesatya priya
Add gpio ranges and correct the compatible to add "qcom,spmi-gpio" as this pmic is on spmi bus. Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: satya priya <skakit@codeaurora.org> Link: https://lore.kernel.org/r/1621937466-1502-5-git-send-email-skakit@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-25arm64: dts: qcom: pm8350c: Add temp-alarm supportsatya priya
Add temp-alarm support for PM8350C pmic. Signed-off-by: satya priya <skakit@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/1621937466-1502-4-git-send-email-skakit@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-25arm64: dts: qcom: pm7325: Add pm7325 base dts filesatya priya
Add base DTS file for pm7325 along with GPIOs and temp-alarm nodes. Signed-off-by: satya priya <skakit@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/1621937466-1502-3-git-send-email-skakit@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-25arm64: dts: qcom: sm8350: Add label for thermal-zones nodesatya priya
Add label "thermal_zones" for thermal-zones node. Signed-off-by: satya priya <skakit@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/1621937466-1502-2-git-send-email-skakit@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-25arm64: dts: qcom: SC7280: Add thermal zone supportRajeshwari Ravindra Kamble
Adding thermal zone and cooling maps support in SC7280. Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Rajeshwari Ravindra Kamble <rkambl@codeaurora.org> Link: https://lore.kernel.org/r/1620367641-23383-4-git-send-email-rkambl@codeaurora.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-28 13:17:07 +0000