summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-03-02drm/sun4i: Add support for H3 display engineJernej Skrabec
H3 display engine has two mixers which are connected to HDMI and TV output. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180301213442.16677-8-jernej.skrabec@siol.net
2018-03-02dt-bindings: display: sun4i-drm: Add compatibles for H3 HDMI pipelineJernej Skrabec
Add missing compatibles for H3 HDMI pipeline. These compatibles can also be used with H5 SoC. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180301213442.16677-6-jernej.skrabec@siol.net
2018-03-01drm/i915: Check for I915_MODE_FLAG_INHERITED before ↵Maarten Lankhorst
drm_atomic_helper_check_modeset Moving the check upwards will mean we we no longer have to add planes and connectors manually, because everything is handled correctly by drm_atomic_helper_check_modeset() as intended. [applied with whitespace changes to make sparse happy] Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Lyude Paul <lyude@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180221092808.30060-1-maarten.lankhorst@linux.intel.com
2018-03-01drm/i915: Replace open-coded wait-for loopChris Wilson
Now that we can pass arbitrary commands into the base __wait_for() macro, we can reimplement the open-coded wait-for inside i915_gem_idle_work_handler() using the new macro. This means that instead of using ktime, we now use jiffies, and benefit from the exponential sleep backoff that allows a fast response if the HW settles quickly. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180301103338.5380-1-chris@chris-wilson.co.uk
2018-03-01drm/amd/amdgpu: Mask rptr as well in ring debugfsTom St Denis
The read/write pointers on sdma4 devices increment beyond the ring size and should be masked. Tested on my Ryzen 2400G. Signed-off-by: Tom St Denis <tom.stdenis@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-01drm/amdgpu: try again kiq access if not in IRQ(v4)Monk Liu
sometimes GPU is switched to other VFs and won't swich back soon, so the kiq reg access will not signal within a short period, instead of busy waiting a long time(MAX_KEQ_REG_WAIT) and returning TMO we can istead sleep 5ms and try again later (non irq context) And since the waiting in kiq_r/weg is busy wait, so MAX_KIQ_REG_WAIT shouldn't set to a long time, set it to 10ms is more appropriate. if gpu already in reset state, don't retry the KIQ reg access otherwise it would always hang because KIQ was already die usually. v2: replace schedule() with msleep() for the wait v3: use while loop for the wait repeating use macros for the sleep period more description for it v4: drop unused variable Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com Reviewed-by: Pixel Ding <Pixel.Ding@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-01drm/amdgpu: cleanups for vram lost handlingMonk Liu
1)create a routine "handle_vram_lost" to do the vram recovery, and put it into amdgpu_device_reset/reset_sriov, this way no need of the extra paramter to hold the VRAM LOST information and the related macros can be removed. 3)show vram_recover failure if time out, and set TMO equal to lockup_timeout if vram_recover is under SRIOV runtime mode. 4)report error if any ip reset failed for SR-IOV Signed-off-by: Monk Liu <Monk.Liu@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-01drm/amdgpu: stop all rings before doing gpu recoverMonk Liu
found recover_vram_from_shadow sometimes get executed in paralle with SDMA scheduler, should stop all schedulers before doing gpu reset/recover Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Tested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-03-01drm/rockchip: analogix_dp: reorder psr_unregister call in unbindJeffy Chen
In bind the psr handler gets registered first before the core analogix_dp_bind() gets called. So it should be the other way around in unbind, first unbind the analogix_dp and then unregister the psr. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/76025075.yWNtk1v57f@phil
2018-03-01drm/rockchip: analogix_dp: Add a sanity check for rockchip_drm_psr_register()Jeffy Chen
The rockchip_drm_psr_register() can fail, so add a sanity check for that. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> [moved psr_unregister reordering in unbind to separate patch] Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180110162348.22765-4-thierry.escande@collabora.com
2018-03-01drm/bridge: analogix_dp: Fix connector and encoder cleanupJeffy Chen
Since we are initing connector in the core driver and encoder in the plat driver, let's clean them up in the right places. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180110162348.22765-3-thierry.escande@collabora.com
2018-03-01drm/bridge: analogix: Do not use device's drvdataJeffy Chen
The driver that instantiates the bridge should own the drvdata, as all driver model callbacks (probe, remove, shutdown, PM ops, etc.) are also owned by its driver struct. Moreover, storing two different pointer types in driver data depending on driver initialization status is barely a good practice and in fact has led to many bugs in this driver. Let's clean up this mess and change Analogix entry points to simply accept some opaque struct pointer, adjusting their users at the same time to avoid breaking the compilation. Signed-off-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Acked-by: Jingoo Han <jingoohan1@gmail.com> Acked-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180110162348.22765-2-thierry.escande@collabora.com
2018-03-01drm/i915/perf: fix perf stream opening lockLionel Landwerlin
We're seeing on CI that some contexts don't have the programmed OA period timer that directs the OA unit on how often to write reports. The issue is that we're not holding the drm lock from when we edit the context images down to when we set the exclusive_stream variable. This leaves a window for the deferred context allocation to call i915_oa_init_reg_state() that will not program the expected OA timer value, because we haven't set the exclusive_stream yet. v2: Drop need_lock from gen8_configure_all_contexts() (Matt) Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Fixes: 701f8231a2f ("drm/i915/perf: prune OA configs") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102254 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103715 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103755 Link: https://patchwork.freedesktop.org/patch/msgid/20180301110613.1737-1-lionel.g.landwerlin@intel.com Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.14+
2018-03-01drm/rockchip: vop: Init vskiplines in scl_vop_cal_scale()Jeffy Chen
Currently we are calling scl_vop_cal_scale() to get vskiplines for yrgb and cbcr. So the cbcr's vskiplines might be an unexpected value if the second scl_vop_cal_scale() didn't update it. Init vskiplines in scl_vop_cal_scale() to avoid that. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180223062250.10470-1-jeffy.chen@rock-chips.com
2018-03-01drm/rockchip: Add device links for master and componentsJeffy Chen
Since we are trying to access components' resources in the master's suspend/resume PM callbacks(e.g. panel), add device links to correct the suspend/resume and shutdown ordering. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180207175309.21095-1-enric.balletbo@collabora.com
2018-03-01drm/i915/icl: Interrupt handlingMika Kuoppala
v2: Rebase. v3: * Remove DPF, it has been removed from SKL+. * Fix -internal rebase wrt. execlists interrupt handling. v4: Rebase. v5: * Updated for POR changes. (Daniele Ceraolo Spurio) * Merged with irq handling fixes by Daniele Ceraolo Spurio: * Simplify the code by using gen8_cs_irq_handler. * Fix interrupt handling for the upstream kernel. v6: * Remove early bringup debug messages (Tvrtko) * Add NB about arbitrary spin wait timeout (Tvrtko) v7 (from Paulo): * Don't try to write RO bits to registers. * Don't check for PCH types that don't exist. PCH interrupts are not here yet. v9: * squashed in selector and shared register handling (Daniele) * skip writing of irq if data is not valid (Daniele) * use time_after32 (Chris) * use I915_MAX_VCS and I915_MAX_VECS (Daniele) * remove fake pm interrupt handling for later patch (Mika) v10: * Direct processing of banks. clear banks early (Chris) * remove poll on valid bit, only clear valid bit (Mika) * use raw accessors, better naming (Chris) v11: * adapt to raw_reg_[read|write] * bring back polling the valid bit (Daniele) v12: * continue if unset intr_dw (Daniele) * comment the usage of gen8_de_irq_handler bits (Daniele) Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180228101153.7224-2-mika.kuoppala@linux.intel.com
2018-03-01drm/i915/icl: Prepare for more ringsTvrtko Ursulin
Gen11 will add more VCS and VECS rings so prepare the infrastructure to support that. Bspec: 7021 v2: Rebase. v3: Rebase. v4: Rebase. v5: Rebase. v6: - Update for POR changes. (Daniele Ceraolo Spurio) - Add provisional guc engine ids - to be checked and confirmed. v7: - Rebased. - Added the new ring masks. - Added the new HW ids. v8: - Introduce I915_MAX_VCS/VECS to avoid magic numbers (Michal) v9: increase MAX_ENGINE_INSTANCE to 3 Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Oscar Mateo <oscar.mateo@intel.com> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180228101153.7224-1-mika.kuoppala@linux.intel.com
2018-03-01Merge drm-next into drm-intel-next-queued (this time for real)Joonas Lahtinen
To pull in the HDCP changes, especially wait_for changes to drm/i915 that Chris wants to build on top of. Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-03-01drm/i915/dp: Add HBR3 rate (8.1 Gbps) to dp_rates arrayManasi Navare
dp_rates[] array is a superset of all the link rates supported by sink devices. DP 1.3 specification adds HBR3 (8.1Gbps) link rate to the set of link rates supported by sink. This patch adds this rate to dp_rates[] array that gets used to populate the sink_rates[] array limited by max rate obtained from DP_MAX_LINK_RATE DPCD register. v2: * Rebased on top of Jani's localized rates patch Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1519857110-26916-1-git-send-email-manasi.d.navare@intel.com
2018-03-01Merge tag 'drm-intel-next-2018-02-21' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next Driver Changes: - Lift alpha_support protection from Cannonlake (Rodrigo) * Meaning the driver should mostly work for the hardware we had at our disposal when testing * Used to be preliminary_hw_support - Add missing Cannonlake PCI device ID of 0x5A4C (Rodrigo) - Cannonlake port register fix (Mahesh) - Fix Dell Venue 8 Pro black screen after modeset (Hans) - Fix for always returning zero out-fence from execbuf (Daniele) - Fix HDMI audio when no no relevant video output is active (Jani) - Fix memleak of VBT data on driver_unload (Hans) - Fix for KASAN found locking issue (Maarten) - RCU barrier consolidation to improve igt/gem_sync/idle (Chris) - Optimizations to IRQ handlers (Chris) - vblank tracking improvements (64-bit resolution, PM) (Dhinakaran) - Pipe select bit corrections (Ville) - Reduce runtime computed device_info fields (Chris) - Tune down some WARN_ONs to GEM_BUG_ON now that CI has good coverage (Chris) - A bunch of kerneldoc warning fixes (Chris) * tag 'drm-intel-next-2018-02-21' of git://anongit.freedesktop.org/drm/drm-intel: (113 commits) drm/i915: Update DRIVER_DATE to 20180221 drm/i915/fbc: Use PLANE_HAS_FENCE to determine if the plane is fenced drm/i915/fbdev: Use the PLANE_HAS_FENCE flags from the time of pinning drm/i915: Move the policy for placement of the GGTT vma into the caller drm/i915: Also check view->type for a normal GGTT view drm/i915: Drop WaDoubleCursorLP3Latency:ivb drm/i915: Set the primary plane pipe select bits on gen4 drm/i915: Don't set cursor pipe select bits on g4x+ drm/i915: Assert that we don't overflow frontbuffer tracking bits drm/i915: Track number of pending freed objects drm/i915/: Initialise trans_min for skl_compute_transition_wm() drm/i915: Clear the in-use marker on execbuf failure drm/i915: Prune gen8_gt_irq_handler drm/i915: Track GT interrupt handling using the master iir drm/i915: Remove WARN_ONCE for failing to pm_runtime_if_in_use drm: intel_dpio_phy: fix kernel-doc comments at nested struct drm/i915: Release connector iterator on a digital port conflict. drm/i915/execlists: Remove too early assert drm/i915: Assert that we always complete a submission to guc/execlists drm: move read_domains and write_domain into i915 ...
2018-03-01Merge tag 'tilcdc-4.17' of https://github.com/jsarha/linux into drm-nextDave Airlie
drm/tilcdc changes to v4.17 * tag 'tilcdc-4.17' of https://github.com/jsarha/linux: drm/tilcdc: tilcdc_panel: Rename device from "panel" to "tilcdc-panel" drm/tilcdc: Add support for drm panels drm/tilcdc: panel: Use common error handling code in of_get_panel_info() drm/tilcdc: Delete an error message for a failed memory allocation in seven functions
2018-02-28drm/i915/dp: move link rate arrays where they're usedJani Nikula
Localize link rate arrays by moving them to the functions where they're used. Further clarify the distinction between source and sink capabilities. Split pre and post Haswell arrays, and get rid of the array size arithmetics. Use a direct rate value in the paranoia case of no common rates find. Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180227105911.4485-1-jani.nikula@intel.com
2018-02-28drm/amdgpu: fix module parameter descriptionsAlex Deucher
Some were missing the close parens around options. Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-28drm/amdgpu: Map all visible VRAM at startupAmber Lin
When using CPU to update page table, we need to kmap all the PDs/PTs after they are allocated and that requires a TLB shot down on each CPU, which is quite heavy. Instead, we map the whole visible VRAM to a kernel address at once. Pages can be obtained from the offset. v2: move the mapping base from gmc to amdgpu_mman structure, and the implementation in amdgpu_ttm_* functions Signed-off-by: Amber Lin <Amber.Lin@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-28drm/amd/display: check for ipp before calling cursor operationsShirish S
Currently all cursor related functions are made to all pipes that are attached to a particular stream. This is not applicable to pipes that do not have cursor plane initialised like underlay. Hence this patch allows cursor related operations on a pipe only if ipp in available on that particular pipe. The check is added to set_cursor_position & set_cursor_attribute. Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-02-28drm/amd/display: make dm_dp_aux_transfer return payload bytes instead of sizeShirish S
The drm layer expects aux->transfer() to return the payload bytes read. Currently dm_dp_aux_transfer() returns the payload size which does not gets updated during the read, hence not giving the right data for the drm layer to pars edid. This leads to the drm layer to conclude as the edid is BAD and hence some monitors/devices dont get detected properly. This patch changes the return type of dm_dp_aux_transfer() to actual bytes read during DP_AUX_NATIVE_READ & DP_AUX_I2C_READ. Signed-off-by: Shirish S <shirish.s@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-28tinydrm: add backlight dependencyArnd Bergmann
Calling devm_of_find_backlight directly means we get a link failure without CONFIG_BACKLIGHT_CLASS_DEVICE: drivers/gpu/drm/tinydrm/mi0283qt.o: In function `mi0283qt_probe': mi0283qt.c:(.text+0x684): undefined reference to `devm_of_find_backlight' This adds an explicit Kconfig dependency for it. While I did not observe that failure for st7735r, I assume the same change is needed there for the same reason. Fixes: d1a2e7004b5e ("drm/tinydrm: Replace tinydrm_of_find_backlight with of_find_backlight") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180228134111.2042877-1-arnd@arndb.de
2018-02-28drm/amdgpu: disable GFX ring and disable PQ wptr in hw_finiMonk Liu
otherwise there will be DMAR reading error comes out from CP since GFX is still alive and CPC's WPTR_POLL is still enabled, which would lead to DMAR read error. fix: we can hault CPG after hw_fini, but cannot halt CPC becaues KIQ stil need to be alive to let RLCV invoke, but its WPTR_POLL could be disabled. Signed-off-by: Monk Liu <Monk.Liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-28drm/amdgpu: cleanup SA inti and fini(v2)Monk Liu
should use bo_create_kernel instead of split to two function that create and pin the SA bo issue: before this patch, there are DMAR read error in host side when running SRIOV test, the DMAR address dropped in the range of SA bo. fix: after this cleanups of SA init and fini, above DMAR eror gone. v2: keep sa_bo's fini instead of suspend, to keep reporting error Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-28drm/amdgpu: Correct sdma_v4 get_wptr(v2)Emily Deng
the original method will change the wptr value in wb. v2: furthur cleanup Signed-off-by: Emily Deng <Emily.Deng@amd.com> Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-28drm/amdgpu: adjust timeout for ib_ring_tests(v2)Monk Liu
issue: sometime GFX/MM ib test hit timeout under SRIOV env, root cause is that engine doesn't come back soon enough so the current IB test considered as timed out. fix: for SRIOV GFX IB test wait time need to be expanded a lot during SRIOV runtimei mode since it couldn't really begin before GFX engine come back. for SRIOV MM IB test it always need more time since MM scheduling is not go together with GFX engine, it is controled by h/w MM scheduler so no matter runtime or exclusive mode MM IB test always need more time. v2: use ring type instead of idx to judge Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-28drm/amdgpu: don't use MM idle_work for SRIOV(v2)Monk Liu
SRIOV doesn't give VF cg/pg feature so the MM's idle_work is skipped for SR-IOV v2: remove superfluous changes since idle_work is not scheduled for SR-IOV so the condition check for SR-IOV inside idle_work also can be dropped v3: drop the SRIOV check in amdgpu_vce/uvd_suspend Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-28drm/amd/pp: Print more smu failed info on Vega10Rex Zhu
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-28drm/amd/powerplay: fix power over limit on FijiEric Huang
power containment disabled only on Fiji and compute power profile. It violates PCIe spec and may cause power supply failed. Enabling it will fix the issue, even the fix will drop performance of some compute tests. Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-02-28drm/amdgpu:Fixed wrong emit frame size for encJames Zhu
Emit frame size should match with corresponding function, uvd_v6_0_enc_ring_emit_vm_flush has 5 amdgpu_ring_write Signed-off-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-28drm/amdgpu: increase gart size to 512MBMonk Liu
256MB is too small consider PTE/PDE shadow and TTM eviction activity Signed-off-by: Monk Liu <Monk.Liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-28drm/amdgpu: move WB_FREE to correct placeMonk Liu
WB_FREE should be put after all engines's hw_fini done, otherwise the invalid wptr/rptr_addr would still be used by engines which trigger abnormal bugs. This fixes couple DMAR reading error in host side for SRIOV after guest kmd is unloaded. Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-28drm/amdgpu: change gfx9 ib test to use WBMonk Liu
two reasons to switch SCRATCH reg method to WB method: 1)Because when doing IB test we don't want to involve KIQ health status affect, and since SCRATCH register access is go through KIQ that way GFX IB test would failed due to KIQ fail. 2)acccessing SCRATCH register cost much more time than WB method because SCRATCH register access runs through KIQ which at least could begin after GPU world switch back to current Guest VF Signed-off-by: Monk Liu <Monk.Liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-28drm/amdgpu: cond_exec only for schedule with a jobMonk Liu
issue: under SR-IOV sometimes the iB test will fail on gfx ring fix: with cond_exec inserted in RB the gfx engine would skip part packets if RLCV issue PREEMPT on gfx engine if gfx engine is prior to COND_EXEC packet, this is okay for regular command from UMD, but for the ib test since the whole dma format doesn't support PREEMPT so must remove the COND_EXEC from it. Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-28drm/amdgpu: only flush hotplug work without DCMonk Liu
since hotplug_work is initialized under the case of no dc support Signed-off-by: Monk Liu <Monk.Liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-28drm/amdgpu: skip ECC for SRIOV in gmc late_initMonk Liu
Signed-off-by: Monk Liu <Monk.Liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-28drm/amdgpu: fix&cleanups for wb_clearMonk Liu
fix: should do right shift on wb before clearing cleanups: 1,should memset all wb buffer 2,set max wb number to 128 (total 4KB) is big enough Signed-off-by: Monk Liu <Monk.Liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-02-28drm/i915: Consult aux_ch instead of port in ->get_aux_clock_divider()Ville Syrjälä
While it seems totally unlikely that any system would mix a cpu/north aux channel with a pch/south port (or vice versa) we should still consult intel_dp->aux_ch rather than encoder->port when figuring out which clock is actually used by the aux ch. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180222181036.15251-5-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #irc
2018-02-28drm/i915: Don't deref request->ctx inside unlocked print_request()Chris Wilson
Although we protect the request itself, we don't lock inside intel_engine_dump() and so the request maybe retired as we peek into it. One consequence is that the request->ctx may be freed before we dereference it, leading to a use-after-free. Replace the hw_id we are peeking from inside request->ctx with the request->fence.context, with which we can still track from which context the request originated (although to tie to HW reports requires a little more legwork, but is good enough to follow the GEM traces). [52640.729670] general protection fault: 0000 [#2] SMP [52640.729694] Dumping ftrace buffer: [52640.729701] (ftrace buffer empty) [52640.729705] Modules linked in: vgem snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic x86_pkg_\ temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul snd_hda_intel snd_hda_codec snd_hwdep gha\ sh_clmulni_intel snd_hda_core snd_pcm mei_me mei i915 r8169 mii prime_numbers i2c_hid [52640.729748] CPU: 2 PID: 4335 Comm: gem_exec_schedu Tainted: G UD W 4.16.0-rc3+ #7 [52640.729759] Hardware name: Acer Aspire E5-575G/Ironman_SK , BIOS V1.12 08/02/2016 [52640.729803] RIP: 0010:print_request+0x2b/0xb0 [i915] [52640.729811] RSP: 0018:ffffc90001453c18 EFLAGS: 00010206 [52640.729820] RAX: 6b6b6b6b6b6b6b6b RBX: ffff8801e0292d40 RCX: 0000000000000006 [52640.729829] RDX: ffffc90001453c60 RSI: ffff8801e0292d40 RDI: 0000000000000003 [52640.729838] RBP: ffffc90001453d80 R08: 0000000000000000 R09: 0000000000000001 [52640.729847] R10: ffffc90001453bd0 R11: ffffc90001453c73 R12: ffffc90001453c60 [52640.729856] R13: ffffc90001453d80 R14: ffff8801d5a683c8 R15: ffff8801e0292d40 [52640.729866] FS: 00007f1ee50548c0(0000) GS:ffff8801e8200000(0000) knlGS:0000000000000000 [52640.729876] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [52640.729884] CR2: 00007f1ee5077000 CR3: 00000001d9411004 CR4: 00000000003606e0 [52640.729893] Call Trace: [52640.729922] intel_engine_print_registers+0x623/0x890 [i915] [52640.729948] intel_engine_dump+0x4a3/0x590 [i915] [52640.729957] ? seq_printf+0x3a/0x50 [52640.729977] i915_engine_info+0xb8/0xe0 [i915] [52640.729984] ? drm_mode_gamma_get_ioctl+0xf0/0xf0 [52640.729990] seq_read+0xd5/0x410 [52640.729997] full_proxy_read+0x4b/0x70 [52640.730004] __vfs_read+0x1e/0x120 [52640.730009] ? do_sys_open+0x134/0x220 [52640.730015] ? kmem_cache_free+0x174/0x2b0 [52640.730021] vfs_read+0xa1/0x150 [52640.730026] SyS_read+0x40/0xa0 [52640.730032] do_syscall_64+0x65/0x1a0 [52640.730038] entry_SYSCALL_64_after_hwframe+0x42/0xb7 Reported-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180228094732.28462-1-chris@chris-wilson.co.uk
2018-02-28drm/i915: Don't mangle the CTM on pre-HSWVille Syrjälä
On pre-HSW we have dedicated hardware for the RGB limited range handling, and so we don't want to compress with the CSC matrix. Toss in a FIXME about gamma LUT vs. limited range using the CSC. Cc: Johnson Lin <johnson.lin@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180222214232.6064-4-ville.syrjala@linux.intel.com Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2018-02-28drm/i915: Rename pipe CSC to use ilk_ prefixVille Syrjälä
The pipe CSC was introduced by ILK, so change everything related to use ilk_ as the prefix. Cc: Johnson Lin <johnson.lin@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180222214232.6064-3-ville.syrjala@linux.intel.com Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2018-02-28drm/i915: Remove the pointless 1:1 matrix copyVille Syrjälä
If we don't have to frob with the user provided ctm matrix there's no point in copying it over. Just point at the user ctm directly. Also the matrix gets fully populated by ctm_mult_by_limited() so no need to zero initialize it. Cc: Johnson Lin <johnson.lin@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180222214232.6064-2-ville.syrjala@linux.intel.com Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2018-02-28drm/uapi: The ctm matrix uses sign-magnitude representationVille Syrjälä
The documentation for the ctm matrix suggests a two's complement format, but at least the i915 implementation is using sign-magnitude instead. And looks like malidp is doing the same. Change the docs to match the current implementation, and change the type from __s64 to __u64 to drive the point home. Cc: dri-devel@lists.freedesktop.org Cc: Mihail Atanassov <mihail.atanassov@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Cc: Johnson Lin <johnson.lin@intel.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180222214232.6064-1-ville.syrjala@linux.intel.com Reviewed-by: Harry Wentland <harry.wentland@amd.com>
2018-02-28Merge drm-next into drm-intel-next-queuedJoonas Lahtinen
To pull in the HDCP changes, especially wait_for changes to drm/i915 that Chris wants to build on top of. Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-02-28drm/tilcdc: tilcdc_panel: Rename device from "panel" to "tilcdc-panel"Jyri Sarha
Rename the bundled tilcdc_panel driver from just "panel" to "tilcdc-panel" to avoid noisy error messages from the driver trying to probe all device nodes named "panel". Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 13:14:10 +0000