Age | Commit message (Collapse) | Author |
|
drm_select_eld requires mode_config.mutex and connection_mutex
because it looks at the connector list and at the legacy encoders.
This is not required, because when we call audio_codec_enable we know
which connector it was called for, so pass the state.
This also removes having to look at crtc->config.
Changes since v1:
- Use intel_crtc->pipe instead of drm_crtc_index. (Ville)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-8-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
|
|
This is the last connector still looking at crtc->config. Fix this.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-7-git-send-email-maarten.lankhorst@linux.intel.com
|
|
Adapting the videomode to the hardware constraints is something that
can and must happen during normal operation and isn't something that
the user can avoid. So printing a warning each time it happens isn't
helpful.
Demote this message to the debug level.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
DRM_DEBUG_MM is only valid if the DRM.ko is builtin as currently
depot_save_stack is not exported.
Fixes: 5c7fcf2db027 ("drm/i915: Enable drm_mm debug when enabling DRM_I915_DEBUG")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161108131917.6253-1-chris@chris-wilson.co.uk
|
|
I misread the kbuild result thinking that we had missed the include
(which we had for completeness anyway), what kbuild was actually warning
me about was that depot_save_stack was not exported.
Temporarily fix this by only selecting STACKDEPOT iff drm.ko is builtin
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes: 5705670d0463 ("drm: Track drm_mm allocators and show leaks on shutdown")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161108131917.6253-2-chris@chris-wilson.co.uk
|
|
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1478358492-30738-8-git-send-email-robdclark@gmail.com
|
|
We subclass drm_plane_state, so add mdp5_plane_atomic_print_state() to
dump out our own driver specific plane state.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1478358492-30738-7-git-send-email-robdclark@gmail.com
|
|
Useful to dump current state from debugfs, if turning on the drm.debug
bit is too much overhead.
The drm_state_dump() can also be used by drivers, for example to
implement a module param that dumps state on error irqs.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1478358492-30738-6-git-send-email-robdclark@gmail.com
|
|
The contents of drm_{plane,crtc,connector}_state is dumped before
commit. If a driver extends any of the state structs, it can implement
the corresponding funcs->atomic_print_state() to add it's own driver
specific state.
Signed-off-by: Rob Clark <robdclark@gmail.com>
[seanpaul resolved conflict in drm_plane.h]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
|
|
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
[seanpaul resolved conflict in drm_plane.h]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
|
|
Sometimes it is nice not to duplicate equivalent printk() and
seq_printf() code.
v2: simplify things w/ va_format, and use dev_printk, docs
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1478358492-30738-3-git-send-email-robdclark@gmail.com
|
|
I'll want to print things in a similar way in a later patch. This will
make it easier.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1478358492-30738-2-git-send-email-robdclark@gmail.com
|
|
Reverts commit fb8b7d2b9d80
("reservation: wait only with non-zero timeout specified (v3)")
Otherwise signaling might never be activated on the fences. This can
result in infinite waiting with hardware which has unreliable interrupts.
v2: still return one when the timeout is zero and we don't have any fences.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
[sumits: fix checkpatch warnings]
Link: http://patchwork.freedesktop.org/patch/msgid/1478553376-18575-4-git-send-email-alexander.deucher@amd.com
|
|
reservation_object_wait_timeout_rcu() should enable signaling even with a
zero timeout, but ttm_bo_wait() can also be called from atomic context and
then it is not a good idea to do this.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
[sumits: fix checkpatch warnings]
Link: http://patchwork.freedesktop.org/patch/msgid/1478553376-18575-3-git-send-email-alexander.deucher@amd.com
|
|
Reverts commit 847b19a39e4c
("dma-buf/fence: don't wait when specified timeout is zero")
When we don't call the wait function software signaling might never be
activated. This can cause infinite polling loops with unreliable interrupt
driven hardware.
v2: rebase on drm-next
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
[sumits: reword commit msg for checkpatch warnings]
Link: http://patchwork.freedesktop.org/patch/msgid/1478553376-18575-2-git-send-email-alexander.deucher@amd.com
|
|
Kernel functions taking a timeout usually return 1 on success even
when they get a zero timeout.
v2: agd: rebase on drm-next
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1478553376-18575-1-git-send-email-alexander.deucher@amd.com
|
|
v2: agd: rebase and squash in all the previous optimizations and
changes so everything compiles.
v3: squash in Slava's 32bit build fix
v4: rebase on drm-next (fence -> dma_fence),
squash in Monk's ioctl update patch
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
[sumits: fix checkpatch warnings]
Link: http://patchwork.freedesktop.org/patch/msgid/1478290570-30982-2-git-send-email-alexander.deucher@amd.com
|
|
Return the index of the first signaled fence. This information
is useful in some APIs like Vulkan.
v2: rebase on drm-next (fence -> dma_fence)
Signed-off-by: monk.liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
[sumits: fix warnings]
Link: http://patchwork.freedesktop.org/patch/msgid/1478290570-30982-1-git-send-email-alexander.deucher@amd.com
|
|
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1477515862-7980-1-git-send-email-gustavo@padovan.org
|
|
Once sw_sync_ioctl_create_fence() returns we no longer have the
*pt pointer to the fence base object thus we need to put the reference
we have from the fence creation to keep a correct reference accounting.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1477515599-7685-1-git-send-email-gustavo@padovan.org
|
|
We get 1 warning when building kernel with W=1:
drivers/dma-buf/sw_sync.c:87:23: warning: no previous prototype for 'sync_timeline_create' [-Wmissing-prototypes]
In fact, this function is only used in the file in which it is
declared and don't need a declaration, but can be made static.
So this patch marks it 'static'.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1474202961-10099-1-git-send-email-baoyou.xie@linaro.org
|
|
The newly added assert_kernel_context_is_current introduces a warning
when built with W=1:
drivers/gpu/drm/i915/i915_gem.c: In function ‘assert_kernel_context_is_current’:
drivers/gpu/drm/i915/i915_gem.c:4417:63: error: suggest braces around empty body in an ‘else’ statement [-Werror=empty-body]
Changing the GEM_BUG_ON() macro from an empty definition to "do { } while (0)"
makes the macro more robust to use and avoids the warning.
Fixes: 3033acab07f9 ("drm/i915: Queue the idling context switch after all other timelines")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161108135834.2166677-1-arnd@arndb.de
|
|
drm-intel-next-queued
gvt-next-2016-11-07
- Fix regression from e95433c73a11
- Some MMIO handler fixes
- Add better handling for guest reset control
- stratch page table tree for shadow ppgtt
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
|
|
The code to determine the primary plane offset for gen2/3 looks
different than the code for gen4+, but in fact it's doing the same
thing. Let's make it uniform. Allows us to eliminate the 'obj' from
the list of local variables as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478550057-24864-6-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
intel_cursor_plane_create() and intel_sprite_plane_create() return
an error pointer, so let's not mistakenly look for a NULL pointer.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
References: https://lists.freedesktop.org/archives/intel-gfx/2016-November/110690.html
Fixes: b079bd17e301 ("drm/i915: Bail if plane/crtc init fails")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478550057-24864-5-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
Use the passed in plane_state instead of plane->state in
vlv_update_plane(). Currently the two are one and the same, but if we
start queuing up multiple plane updates they might not be.
Looks like this was rebase fail on my part.
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: 8d0deca8c6e0 ("drm/i915: Pass 90/270 vs. 0/180 rotation info for intel_gen4_compute_page_offset()")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1478550057-24864-4-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
|
|
0day found that stackdepot.h doesn't get automatically included on all
architectures, so remember to add our #include.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes: 5705670d0463 ("drm: Track drm_mm allocators and show leaks on shutdown")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Christian König <christian.koenig@amd.com>.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161108115601.22873-1-chris@chris-wilson.co.uk
|
|
It's possible for CVAL to get set whilst we are in config mode. If this
happens, afer we leave config mode the HW will latch whatever
configuration is in the registers at the next vsync. Most likely this
will be a partial configuration, as we'll be racing against the ongoing
atomic_commit.
To avoid this, clear CVAL before leaving config mode.
Signed-off-by: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
|
|
We always flush the chipset prior to executing with the GPU, so we can
skip the flush during ordinary domain management.
This should help mitigate some of the potential performance regressions,
but likely trivial, from doing the flush unconditionally before execbuf
introduced in commit dcd79934b0dd ("drm/i915: Unconditionally flush any
chipset buffers before execbuf")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161106130001.9509-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Get rid of sloppy inline functions now that we don't have more users:
i915_gem_request_get_seqno
i915_gem_request_get_engine
v2:
- request->engine is always non-NULL (Chris)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478589108-3702-1-git-send-email-joonas.lahtinen@linux.intel.com
|
|
Some of the members of struct drm_plane had extra comments so for these
add inline kernel comment to consolidate all documentation in one place.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
[danvet: Bikeshed a bit more to have real paragraphs with real
sentences.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1478513013-3221-4-git-send-email-gustavo@padovan.org
|
|
drm_atomic_set_fence_for_plane() is smart and won't overwrite
plane_state->fence if the user already set an explicit fence there.
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1478513013-3221-3-git-send-email-gustavo@padovan.org
|
|
drm_atomic_set_fence_for_plane() is smart and won't overwrite
plane_state->fence if the user already set an explicit fence there.
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1478513013-3221-2-git-send-email-gustavo@padovan.org
|
|
This new function should be used by drivers when setting a implicit
fence for the plane. It abstracts the fact that the user might have
chosen explicit fencing instead.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1478513013-3221-1-git-send-email-gustavo@padovan.org
|
|
It is kind of a pointless restriction. If userspace does silly things
like using crtcA's cursor plane on crtcB, and then setcursor on crtcA,
it will end up with the overlay disabled on crtcB. But userspace is
allowed to shoot itself like this.
v2: don't WARN_ON() if caller did not set ->possible_crtcs. This keeps
the existing behavior by default, if caller does not set the
->possible_crtcs.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1478357521-26542-1-git-send-email-robdclark@gmail.com
|
|
Existing userspace expected the mode flags to match the xrandr
definitions 1:1, and even adding new flags in he previously unused
bits is likely to break existing userspace. Add a comment warning
people about this potential trap.
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: "Lin, Jia" <lin.a.jia@intel.com>
Cc: Akashdeep Sharma <akashdeep.sharma@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1478182201-26086-1-git-send-email-ville.syrjala@linux.intel.com
|
|
All the VICs apart from 58 and 59 have the word "Hz" included in the
comment. Include it for 59 and 59 as well.
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1478177609-16762-1-git-send-email-ville.syrjala@linux.intel.com
|
|
psb_gem_create_ioctl and psb_gem_mmap_ioctl are not used currently,
their declarations are useless.
Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1477990879-13139-1-git-send-email-jiang.biao2@zte.com.cn
|
|
psb_gtt_remove is only used in this file, and make it static to
eliminate missing-prototypes compiling warning.
Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1477972185-24826-1-git-send-email-jiang.biao2@zte.com.cn
|
|
The kernel-doc references drm_atomic_commit_planes() which does not
exist. The functions name is drm_atomic_helper_commit_planes().
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161031173646.19453-1-stefan@agner.ch
|
|
Add obvious description to drm_framebuffer_unregister_private()
to explain it is deprecated.
Signed-off-by: Rongrong Zou <zourongrong@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1477915196-100299-1-git-send-email-zourongrong@gmail.com
|
|
A frequent issue that arises on shutdown is the drm_mm range manager
complaining of a leak. To aide debugging those, drm can now track the
allocation callsite and print those for the leaks.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161029184214.17329-2-chris@chris-wilson.co.uk
|
|
We can use the kernel's stack tracer and depot to record the allocation
site of every drm_mm user. Then on shutdown, as well as warning that
allocated nodes still reside with the drm_mm range manager, we can
display who allocated them to aide tracking down the leak.
v2: Move Kconfig around so it lies underneath the DRM options submenu.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161031090806.20073-1-chris@chris-wilson.co.uk
|
|
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
On LLC, or even snooped, machines rendering via the GPU ends up in the CPU
cache. This cacheline dirt also needs to be flushed to main memory when
moving to an incoherent domain, such as the display's scanout engine.
Mostly, this happens because either the object is marked as dirty from
its first use or is avoided by setting the object into the display
domain from the start.
v2: Treat WT as not requiring a clflush prior to use on the display
engine as well.
Fixes: 0f71979ab7fb ("drm/i915: Performed deferred clflush inside set-cache-level")
References: https://bugs.freedesktop.org/show_bug.cgi?id=95414
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.0+
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161107165204.7008-1-chris@chris-wilson.co.uk
|
|
Support downsizing to 1/2 width and/or height in the CSI.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Since the atomic modeset conversion, this should not be an issue
anymore.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
mode
During resume we will reset the SW/HW tracking for each ring head/tail
pointers and so are not prepared to replay any pending requests (as
opposed to GPU reset time). Add an assert for this both to the suspend
and the resume code.
v2:
- Check for ELSP port idle already during suspend and check !gt.awake
during resume. (Chris)
v3:
- Move the !gt.awake check to i915_gem_resume().
v4:
- s/intel_lr_engines_idle/intel_execlists_idle/ (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478510405-11799-4-git-send-email-imre.deak@intel.com
|
|
We assume that the GPU is idle once receiving the seqno via the last
request's user interrupt. In execlist mode the corresponding context
completed interrupt can be delayed though and until this latter
interrupt arrives we consider the request to be pending on the ELSP
submit port. This can cause a problem during system suspend where this
last request will be seen by the resume code as still pending. Such
pending requests are normally replayed after a GPU reset, but during
resume we reset both SW and HW tracking of the ring head/tail pointers,
so replaying the pending request with its stale tail pointer will leave
the ring in an inconsistent state. A subsequent request submission can
lead then to the GPU executing from uninitialized area in the ring
behind the above stale tail pointer.
Fix this by making sure any pending request on the ELSP port is
completed before suspending. I used a polling wait since the completion
time I measured was <1ms and since normally we only need to wait during
system suspend. GPU idling during runtime suspend is scheduled with a
delay (currently 50-100ms) after the retirement of the last request at
which point the context completed interrupt must have arrived already.
The chance of this bug was increased by
commit 1c777c5d1dcdf8fa0223fcff35fb387b5bb9517a
Author: Imre Deak <imre.deak@intel.com>
Date: Wed Oct 12 17:46:37 2016 +0300
drm/i915/hsw: Fix GPU hang during resume from S3-devices state
but it could happen even without the explicit GPU reset, since we
disable interrupts afterwards during the suspend sequence.
v2:
- Do an unlocked poll-wait first. (Chris)
v3-4:
- s/intel_lr_engines_idle/intel_execlists_idle/ and move
i915.enable_execlists check to the new helper. (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98470
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478510405-11799-3-git-send-email-imre.deak@intel.com
|
|
There is a small race where a new request can be submitted and retired
after the idle worker started to run which leads to idling the GPU too
early. Fix this by deferring the idling to the pending instance of the
worker.
This scenario was pointed out by Chris.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1478510405-11799-2-git-send-email-imre.deak@intel.com
|