summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-04-24net/mlx4_en: Add HW timestamping (TS) supportAmir Vadai
The patch allows to enable/disable HW timestamping for incoming and/or outgoing packets. It adds and initializes all structs and callbacks needed by kernel TS API. To enable/disable HW timestamping appropriate ioctl should be used. Currently HWTSTAMP_FILTER_ALL/NONE and HWTSAMP_TX_ON/OFF only are supported. When enabling TS on receive flow - VLAN stripping will be disabled. Also were made all relevant changes in RX/TX flows to consider TS request and plant HW timestamps into relevant structures. mlx4_ib was fixed to compile with new mlx4_cq_alloc() signature. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24net/mlx4_core: Read HCA frequency and map internal clockEugenia Emantayev
Read HCA frequency, read PCI clock bar and offset, map internal clock to PCI bar. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24net/mlx4_core: Add timestamping device capabilityEugenia Emantayev
Add new device capability for timestamping support and query FW to retrieve it. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next John W. Linville says: ==================== Here is one last(?) big wireless bits pull request before the merge window... Regarding the mac80211 bits, Johannes says: "Here's another big pull request for the -next stream. This one has a ton of driver updates, which hopefully addresses all drivers, but maybe you have more new drivers than I have in my tree? Not entirely sure, let me know if this is the case and then I can merge wireless-next. I'm including a large number of small changes, see the shortlog. The two bigger things are making VHT compatible with not using channel contexts (from Karl) and the stop-while-suspended fixes I developed together with Stanislaw." ...and... "This time I have a relatively large number of fixes and small improvements, the most important one being Bob's RCU fix. The two big things are Felix's work on rate scaling tables (with a big thanks to Karl too) and my own work on CSA handling to finally properly handle HT (and some VHT.)" As for the iwlwifi bits, Johannes says: "The biggest work here is Bluetooth coexistence and power saving. Other than that, I have a few small fixes that weren't really needed for 3.9 and a new PCI ID." About the NFC bits, Samuel says: "With this one we have: - A major pn533 update. The pn533 framing support has been changed in order to easily support all pn533 derivatives. For example we now support the ACR122 USB dongle. - An NFC MEI physical layer code factorization through the mei_phy NFC API. Both the microread and the pn544 drivers now use it. - LLCP aggregation support. This allows NFC p2p devices to send aggregated frames containing all sort of LLCP frames except SYMM and aggregation frames. - More LLCP socket options for getting the remote device link parameters. - Fixes for the LLCP socket option code added with the first pull request for 3.10. - Some support for LLCP corner cases like 0 length SDUs and general DISC (tagged with a 0,0 dsap ssap couple) handling. - RFKILL support for NFC." For the b43 bits, Rafał says: "Let me remind the changes for b43: > Changes include: > 1) Minor improvements for HT-PHY code (BCM4331) > 2) Code cleaning for HT-PHY and N-PHY" Concerning the bluetooth bits, Gustavo says: "A set of changes intended for 3.10. The biggest changes here are from David Herrmann, he rewrote most of the HIDP layer making it more reliable. Marcel added a driver setup stage for device that need special handling on their early initialization. Other than that we have the usual clean ups, bugfixes and small improvements." Along with all that, there is the usual collection of random/various updates to ath9k, mwifiex, brcmfmac, brcmsmac, rt2x00, and wil6210. I also included a pull of the wireless tree to resolve a merge conflict. Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24netlink: fix compilation after memory mapped patchesNicolas Dichtel
Depending of the kernel configuration (CONFIG_UIDGID_STRICT_TYPE_CHECKS), we can get the following errors: net/netlink/af_netlink.c: In function ‘netlink_queue_mmaped_skb’: net/netlink/af_netlink.c:663:14: error: incompatible types when assigning to type ‘__u32’ from type ‘kuid_t’ net/netlink/af_netlink.c:664:14: error: incompatible types when assigning to type ‘__u32’ from type ‘kgid_t’ net/netlink/af_netlink.c: In function ‘netlink_ring_set_copied’: net/netlink/af_netlink.c:693:14: error: incompatible types when assigning to type ‘__u32’ from type ‘kuid_t’ net/netlink/af_netlink.c:694:14: error: incompatible types when assigning to type ‘__u32’ from type ‘kgid_t’ We must use the helpers to get the uid and gid, and also take care of user_ns. Fix suggested by Eric W. Biederman <ebiederm@xmission.com>. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2013-04-23Bluetooth: btmrvl: report error if verify_fw_download times outAndreas Fenkart
FW does the synchronization of the different modules during init. It will report different modules, that it is ready at different times. The fw download 'winner' will be reported fw ready first. Without this patch, btmrvl was already continuing before the FW told it too. Probably on behalf of the 'winner' which then never sees FW ready and times out. Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-23Bluetooth: btmrvl: release lock while waiting for fw download completeAndreas Fenkart
If not winner, driver must release the sdio host lock, so the fw download can progress. While holding the lock fw download is stalled and the following error is produced: [ 235.746015] Bluetooth: FW failed to be active in time! [ 235.752799] Bluetooth: Downloading firmware failed! Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-23Bluetooth: btmrvl: use native helpers for debugfsAndy Shevchenko
Clean up the code by using native debugfs helpers, instead of implementing them ourselves: debugfs_create_u8() debugfs_create_x16() debugfs_create_file() debugfs_remove_recursive() Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-23Bluetooth: Remove unneeded parameter from L2CAP ATT channel handlingMarcel Holtmann
The CID is fixed to L2CAP ATT channel and so there is no need to hand it down to the handling function. Just use a constant instead. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-23Bluetooth: hci_get_cmd_complete() can be staticFengguang Wu
There are new sparse warnings show up in tree: git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next master head: a0b644b0385fa58ca578f6dce4473e8a8e6f6c38 commit: 75e84b7c522c6e07964cd1f5bf28535768a1e9fa Bluetooth: Add __hci_cmd_sync() helper function date: 13 days ago >> net/bluetooth/hci_core.c:82:16: sparse: symbol 'hci_get_cmd_complete' was not declared. Should it be static? Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-23Bluetooth: Add support for Intel Bluetooth device [8087:07dc]Tedd Ho-Jeong An
This patch adds support for Intel Bluetooth device by adding btusb_setup_intel() routine that update the device with ROM patch. T: Bus=02 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=8087 ProdID=07dc Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Tedd Ho-Jeong An <tedd.an@intel.com> Acked-by: Marcel Holtmann <marcel@holtmann.org> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-23Bluetooth: Fix sending write_le_host_supporte for LE-only controllersJohan Hedberg
The Bluetooth Core Specification (4.0) defines the Write LE Host Supported HCI command as only available for controllers supporting BR/EDR. This is further reflected in the Read Local Extended Features HCI command also not being available for LE-only controllers. In other words, host-side LE support is implicit for single-mode LE controllers and doesn't have explicit HCI-level enablement. This patch ensures that the LE setting is always exposed as enabled through mgmt and returns a "rejected" response if user space tries to toggle the setting. The patch also ensures that Write LE Host Supported is never sent for LE-only controllers. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2013-04-23netlink: Fix build with mmap disabled.David S. Miller
net/netlink/diag.c: In function 'sk_diag_put_rings_cfg': net/netlink/diag.c:28:17: error: 'struct netlink_sock' has no member named 'pg_vec_lock' net/netlink/diag.c:29:29: error: 'struct netlink_sock' has no member named 'rx_ring' net/netlink/diag.c:31:30: error: 'struct netlink_sock' has no member named 'tx_ring' net/netlink/diag.c:33:19: error: 'struct netlink_sock' has no member named 'pg_vec_lock' Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-23mwifiex: rework round robin scheduling of bss nodes.Andreas Fenkart
Rotate bss prio list, so the bss next to the one served, will come first in the list of bss' with equal priority. This way we pick bss nodes in a round robin fashion. Using list rotation instead of a cur ptr simplifies iteration to calling list_for_each_entry. List rotation is done via list_move, where the head itself is temporarily removed and then re-inserted after the bss just served. Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-23mwifiex: replace ra_list_curr by list rotation.Andreas Fenkart
After a packet is successfully transmitted, ra list is rotated, so the ra next to the one transmitted, will be the first in the list. This way we pick the ra' in a round robin fashion. This significantly simplifies iteration in mwifiex_wmm_get_highest_priolist_ptr to a call to list_for_each_entry. List rotation is done via list_move, where the head itself is temporarily removed and then re-inserted after the item just transferred. Signed-off-by: Andreas Fenkart <andreas.fenkart@streamunlimited.com> Acked-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-23brcmfmac: add credit borrowing mechanismArend van Spriel
The firmware provides credits to the driver per WMM-AC. When only AC_BE are to be transmitted to the firmware the driver may use credits from other priorities to send AC_BE packets towards the firmware. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-23brcmfmac: correct error handling in brcmf_fws_init()Arend van Spriel
In brcmf_fws_init() the error flows were not properly handled and the caller ignored the return value. The only action that is allowed to fail in brcmf_fws_init() is setting the tlv in firmware as the feature is not supported on all devices. Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-23brcmfmac: flush queue upon MACDESC_DEL firmware signalArend van Spriel
When firmware signals the driver to remove a destination entry it may have sk_buff packets queued for it. These should be freed. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-23brcmfmac: support critical protocol API for DHCPPiotr Haber
Adds support for the critical protocol API provided by nl80211 which gives Wifi traffic priority over a Bluetooth (e)SCO connection and disables scanning during DCHP negotiation. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-23brcmfmac: allow scanning to be suppressed in the driverArend van Spriel
During the DHCP protocol exchange it is benificial to suppress scan requests which may decrease time to complete DHCP protocol. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-23ath9k: Fix RX DMA mappingSujith Manoharan
After the commit "ath9k: improve dma map failure handling", the wrong buffer was DMA-unmapped, introducing warnings like the one below. This patch fixes the issue. WARNING: at /home/sujith/dev/wireless-testing/lib/dma-debug.c:986 check_sync+0x4bc/0x580() Hardware name: LIFEBOOK AH531 ath9k 0000:02:00.0: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x00000000d9012800] [size=48 bytes] Pid: 86, comm: kworker/u:5 Tainted: G W O 3.9.0-rc8-wl-debug #106 Call Trace: [<ffffffff810410c0>] warn_slowpath_common+0x70/0xa0 [<ffffffff8104113c>] warn_slowpath_fmt+0x4c/0x50 [<ffffffff8125432c>] check_sync+0x4bc/0x580 [<ffffffff8109e5f7>] ? trace_hardirqs_on_caller+0xa7/0x190 [<ffffffff8109e6ed>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff81254488>] debug_dma_sync_single_for_device+0x48/0x50 [<ffffffffa0a53825>] ? ath9k_iowrite32+0x35/0x90 [ath9k] [<ffffffff812512f0>] ? swiotlb_tbl_sync_single+0x50/0x90 [<ffffffff81251350>] ? swiotlb_sync_single+0x20/0x30 [<ffffffff8125137f>] ? swiotlb_sync_single_for_device+0xf/0x20 [<ffffffffa0a58baf>] ath_rx_edma_buf_link+0xef/0x140 [ath9k] [<ffffffffa0a58c4e>] ath_rx_addbuffer_edma+0x4e/0x90 [ath9k] [<ffffffffa0a59c51>] ath_startrecv+0xf1/0x120 [ath9k] [<ffffffffa0a550e0>] ath_complete_reset+0x20/0x130 [ath9k] [<ffffffffa0a5790d>] ath_reset_internal+0x10d/0x210 [ath9k] [<ffffffffa0a5878c>] ath9k_config+0x47c/0x7b0 [ath9k] [<ffffffffa06d4978>] ieee80211_hw_config+0x88/0x3f0 [mac80211] [<ffffffffa06d4a3f>] ? ieee80211_hw_config+0x14f/0x3f0 [mac80211] [<ffffffffa06dbed1>] __ieee80211_scan_completed+0xc1/0x440 [mac80211] [<ffffffffa06dd002>] ieee80211_scan_work+0x82/0x440 [mac80211] [<ffffffff810606a3>] process_one_work+0x1e3/0x530 [<ffffffff81060641>] ? process_one_work+0x181/0x530 [<ffffffff8106163f>] worker_thread+0x10f/0x3c0 [<ffffffff81061530>] ? manage_workers+0x330/0x330 [<ffffffff810665da>] kthread+0xea/0xf0 [<ffffffff810664f0>] ? kthread_create_on_node+0x140/0x140 [<ffffffff8146085c>] ret_from_fork+0x7c/0xb0 [<ffffffff810664f0>] ? kthread_create_on_node+0x140/0x140 Cc: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-23ath9k: Use lockless variants for the RX fifo queueSujith Manoharan
The RX fifo can be accessed from the common tasklet or it can be reaped/cleaned when RX is stopped, which is done when doing a reset or channel change - this happens in process context. Since it is ensured that there are no pending tasklets when stopping RX and cleaning the FIFO, there is no need to use SKB queue functions which take internal locks. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-23ath9k: Reduce deep indentationSujith Manoharan
The EDMA case is handled first, so the else condition can be removed. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-23ath9k: Remove unused argument "size"Sujith Manoharan
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Acked-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-23ath9k: add support for the new rate control APIFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-23ath9k: merge ath_tx_start_dma into ath_tx_startFelix Fietkau
The split makes no sense and merging the functions makes further changes easier to implement Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-23rtl8192c:dm: Properly initialize local array and set value.Han Shen
GCC 4.8 is spitting out uninitialized-variable warnings against "drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c". This patch adds initialization to the variable and properly sets its value. Signed-off-by: Han Shen (shenhan@google.com) Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-23ath9k: apply coverage class on slottime tooMathias Kretschmer
According to 802.11-2007 17.3.8.6 (slot time), the slot time should be increased by 3 us * coverage class. The code only increased the ack timeout, which is fixed by this patch. We have noticed in our long shot scenario that we see less collisions with this patch. Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> [add standard reference and commit message] Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-23Merge branch 'master' of git://git.infradead.org/users/rafal/b43-nextJohn W. Linville
2013-04-23Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c
2013-04-23caif: Update Dmitry's email address.sjur.brandeland@stericsson.com
Dmitry's address will start bouncing in a few days, update to his new mail address. Cc: Dmitry Tarnyagin <dmitry.tarnyagin@stericsson.com> Cc: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no> Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-23caif: Remove bouncing address for Daniel Martenssonsjur.brandeland@stericsson.com
cc: Daniel Martensson <Daniel.Martensson@stericsson.com> Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-23caif: Remove my bouncing email address.sjur.brandeland@stericsson.com
Remove my soon bouncing email address. Also remove the "Contact:" line in file header. The MAINTAINERS file is a better place to find the contact person anyway. Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-23MAINTAINERS: Change Maintainer for CAIFsjur.brandeland@stericsson.com
Dmitry Tarnyagin will take over as maintainer for CAIF. Cc: Dmitry Tarnyagin <dmitry.tarnyagin@stericsson.com> Cc: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no> Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-23netlink: fix typo in net/netlink/af_netlink.cStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-23b43: N-PHY: don't use deprecated b43_radio_foo16Rafał Miłecki
All radio ops are 16b (there is only 1 exception for reg 0x1), so we deprecated b43_radio_read16 and b43_radio_write16 long time ago. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2013-04-23b43: N-PHY: clean init tablesRafał Miłecki
Sort defines, use one macro for all revs, support for 5GHz when uploading antenna table. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2013-04-23b43: N-PHY: move tables init function to tables fileRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2013-04-23b43: N-PHY: use defines for (re)storing VCM configRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2013-04-23b43: N-PHY: use shortcut "ctl" in functions namesRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2013-04-23b43: N-PHY: use enum for INTC override function argumentRafał Miłecki
Also make a function name shorter so we can easily fit 80 chars. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2013-04-23b43: N-PHY: define missing registersRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2013-04-23b43: use defines for board_typeRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2013-04-23b43: N-PHY: fix "NB" RSSI calibration on PHYs rev2-Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2013-04-23b43: N-PHY: use enum for RSSI type everywhere we use itRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2013-04-23b43: N-PHY: rename RSSI types to be shorter and more accurateRafał Miłecki
Thanks to Broadcom releasing some code we can use better names. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2013-04-23b43: N-PHY: use more friendly variables names in RSSI codeRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2013-04-23b43: N-PHY: simplify conditions in RSSI offset scale functionRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2013-04-23b43: N-PHY: use enum for RAIL typeRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 05:40:19 +0000