summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-09-30wifi: mt76: mt7915: fix beamforming availability checkMeiChia Chiu
Without this patch, when ap sets the tx stream number to 2, ap won't send any beamforming packet. Fixes: f89f297aef28 ("mt76: mt7915: fix txbf starec TLV issues") Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7915: update mpdu density capabilityPeter Chiu
Set mpdu density to 2 usec for non-mt7915 Wi-Fi 6 generation chipsets to align to the hardware capability which improves the throughput. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: check vif type before reporting cca and csaPeter Chiu
Do not report cca and csa finish to upper layer on station type vif to prevent warnings caused by setting beacon. Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: fix per-band IEEE80211_CONF_MONITOR flag comparisonShayne Chen
Use the correct ieee80211_conf of each band for IEEE80211_CONF_MONITOR comparison. Fixes: 24e69f6bc3ca ("mt76: fix monitor rx FCS error in DFS channel") Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: get rid of false alamrs of tx emission issuesStanleyYP Wang
When the set_chan_info command is set with CH_SWITCH_NORMAL reason, even if the action is UNI_CHANNEL_RX_PATH, it'll still generate some unexpected tones, which might confuse DFS CAC tests that there are some tone leakages. To get rid of these kinds of false alarms, always bypass DPD calibration when IEEE80211_CONF_IDLE is set. Reviewed-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: fix potential memory leak of beacon commandsBo Jiao
Fix potential memory leak when setting beacon and inband discovery commands. Fixes: e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets") Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: check sta rx control frame to multibss capabilityAllen Ye
Add CAP3_RX_CTRL_FRAME_TO_MULTIBSS check when setting sta_muru_tlv, which is used to get stations's capability of receiving control frames when running OFDMA with MBSSIDs. Signed-off-by: Allen Ye <allen.ye@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: update beacon size limitationMeiChia Chiu
To accommodate 11v MBSSID IE and support maximum 16 MBSSIDs, expand the beacon size limitation for beacon and inband discovery commands. Co-developed-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Co-developed-by: Money Wang <money.wang@mediatek.com> Signed-off-by: Money Wang <money.wang@mediatek.com> Signed-off-by: MeiChia Chiu <meichia.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: connac: add MBSSID support for mt7996Chank Chen
Add bss_info_uni_mbssid tag and implement 802.11v MBSSID support for mt7996 chipsets. Signed-off-by: Chank Chen <chank.chen@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: fix clang-specific fortify warningsDmitry Antipov
When compiling with clang 16.0.6 and CONFIG_FORTIFY_SOURCE=y, I've noticed the following (somewhat confusing due to absence of an actual source code location): In file included from drivers/net/wireless/mediatek/mt76/mt792x_core.c:4: In file included from ./include/linux/module.h:13: In file included from ./include/linux/stat.h:19: In file included from ./include/linux/time.h:60: In file included from ./include/linux/time32.h:13: In file included from ./include/linux/timex.h:67: In file included from ./arch/x86/include/asm/timex.h:5: In file included from ./arch/x86/include/asm/processor.h:23: In file included from ./arch/x86/include/asm/msr.h:11: In file included from ./arch/x86/include/asm/cpumask.h:5: In file included from ./include/linux/cpumask.h:12: In file included from ./include/linux/bitmap.h:11: In file included from ./include/linux/string.h:254: ./include/linux/fortify-string.h:592:4: warning: call to '__read_overflow2_field' declared with 'warning' attribute: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Wattribute-warning] __read_overflow2_field(q_size_field, size); In file included from drivers/net/wireless/mediatek/mt76/mt7915/main.c:4: In file included from ./include/linux/etherdevice.h:20: In file included from ./include/linux/if_ether.h:19: In file included from ./include/linux/skbuff.h:15: In file included from ./include/linux/time.h:60: In file included from ./include/linux/time32.h:13: In file included from ./include/linux/timex.h:67: In file included from ./arch/x86/include/asm/timex.h:5: In file included from ./arch/x86/include/asm/processor.h:23: In file included from ./arch/x86/include/asm/msr.h:11: In file included from ./arch/x86/include/asm/cpumask.h:5: In file included from ./include/linux/cpumask.h:12: In file included from ./include/linux/bitmap.h:11: In file included from ./include/linux/string.h:254: ./include/linux/fortify-string.h:592:4: warning: call to '__read_overflow2_field' declared with 'warning' attribute: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Wattribute-warning] __read_overflow2_field(q_size_field, size); In file included from drivers/net/wireless/mediatek/mt76/mt7996/main.c:6: In file included from drivers/net/wireless/mediatek/mt76/mt7996/mt7996.h:9: In file included from ./include/linux/interrupt.h:8: In file included from ./include/linux/cpumask.h:12: In file included from ./include/linux/bitmap.h:11: In file included from ./include/linux/string.h:254: ./include/linux/fortify-string.h:592:4: warning: call to '__read_overflow2_field' declared with 'warning' attribute: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Wattribute-warning] __read_overflow2_field(q_size_field, size); The compiler actually complains on 'mt7915_get_et_strings()', 'mt792x_get_et_strings()' and 'mt7996_get_et_strings()' due to the same reason: fortification logic inteprets call to 'memcpy()' as an attempt to copy the whole array from its first member and so issues an overread warning. These warnings may be silenced by passing an address of the whole array and not the first member to 'memcpy()'. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7921e: Support MT7992 IP in Xiaomi Redmibook 15 Pro (2023)Ingo Rohloff
In the Xiaomi Redmibook 15 Pro (2023) laptop I have got, a wifi chip is used, which according to its PCI Vendor ID is from "ITTIM Technology". This chip works flawlessly with the mt7921e module. The driver doesn't bind to this PCI device, because the Vendor ID from "ITTIM Technology" is not recognized. This patch adds the PCI Vendor ID from "ITTIM Technology" to the list of PCI Vendor IDs and lets the mt7921e driver bind to the mentioned wifi chip. Signed-off-by: Ingo Rohloff <lundril@gmx.de> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: Use PTR_ERR_OR_ZERO() to simplify codeJinjie Ruan
Return PTR_ERR_OR_ZERO() instead of return 0 or PTR_ERR() to simplify code. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7996: support per-band LED controlJen-Hao Cheng
Extend settings of LED registers to support per-band configuration. Signed-off-by: Jen-Hao Cheng <jen-hao.cheng@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7996: support more options for mt7996_set_bitrate_mask()Howard Hsu
Add support to configure parameters at runtime, such as mcs, gi, and he_ltf. Note that EHT mode does not support this feature yet. Co-developed-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com> Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com> Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7996: only set vif teardown cmds at remove interfaceShayne Chen
Only send commands that disable vif when removing interface, this reduces some unnecessary bss_info and sta_rec commands, especially for station interface. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7996: fix TWT command formatPeter Chiu
Align the command format of UNI_CMD_TWT_ARGT_UPDATE to firmware. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7996: fix rx rate report for CBW320-2Peter Chiu
RX vector reports channel bandwidth 320-1 and 320-2 with different values. Fix it to correctly report rx rate when using CBW320-2. Fixes: 80f5a31d2856 ("wifi: mt76: mt7996: add support for EHT rate report") Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7996: fix wmm queue mappingPeter Chiu
Firmware uses access class index (ACI) for wmm parameters update, so convert mac80211 queue to ACI in mt7996_conf_tx(). Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7996: fix beamformee ss subfield in EHT PHY capHoward Hsu
According to P802.11be_D3.2 Table 9-404m, the minimum value of Beamformee SS field shall be 3. Fix the values to follow the spec. Fixes: 348533eb968d ("wifi: mt76: mt7996: add EHT capability init") Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7996: fix beamform mcu cmd configurationHoward Hsu
The bf_num field represents how many bands can support beamform, so set the value to 3, and bf_bitmap represents the bitmap of bf_num. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7996: set correct wcid in txpPeter Chiu
Set correct wcid in txp to let the SDO hw module look into the correct wtbl, otherwise the tx descriptor may be wrongly fiiled. This patch also fixed the issue that driver could not correctly report sta statistics, especially in WDS mode, which misled AQL. Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices") Co-developed-by: Michael-CY Lee <michael-cy.lee@mediatek.com> Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com> Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: connac: add more unified event IDsDeren Wu
Add more unified event IDs which will be used in new chipset. This is the preliminary patch for mt7925 support. Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: connac: add more unified command IDsDeren Wu
Add more unified command IDs which will be used in new chipset. This is the preliminary patch for mt7925 support. Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: connac: add data field in struct tlvDeren Wu
Add tlv->data element for tlv parsing easier. This is a preliminary patch to support mt7925 driver. Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: connac: add eht support for tx powerDeren Wu
Add eht field in struct mt76_power_limits for 802.11be power config. The function stack size would be too big by eht adding in structure, we also refactor mt76_connac_mcu_rate_txpower_band() to take dynamic allocated memory instead. This is a preliminary patch to support mt7925 driver. Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: connac: add eht support for phy mode configDeren Wu
Add eht configuration support in existing function mt76_connac_get_phy_mode_v2() and export it for mt7925. This is a preliminary patch to support mt7925 driver. Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: connac: export functions for mt7925Deren Wu
mt7925 rely on the similar functionalities in connac layer. Export them for mt7925 reuse. This is a preliminary patch to support mt7925 driver. Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt792x: support mt7925 chip initDeren Wu
add firmware download and dma init support for mt7925. This is a preliminary patch to support mt7925 driver. Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: connac: introduce helper for mt7925 chipsetDeren Wu
Introduce is_mt7925() helper for new chipset. mt7925 runs the same firmware download and mmio map flow as mt7921. This is a preliminary patch to support mt7925 driver. Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Deren Wu <deren.wu@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7915: fix monitor mode issuesFelix Fietkau
Enable receiving other-unicast packets Disable RX header translation in order to proprerly receive data packets. Fixes warnings and missed packets when rx decap offload is enabled Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: add DMA mapping error check in mt76_alloc_txwi()Dmitry Antipov
Add 'dma_mapping_error()' check in 'mt76_alloc_txwi()'. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: remove unused error path in mt76_connac_tx_complete_skbFelix Fietkau
The error handling code was added in order to allow tx enqueue to fail after calling .tx_prepare_skb. Since this can no longer happen, the error handling code is unused. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: fix race condition related to checking tx queue fill statusFelix Fietkau
When drv_tx calls race against local tx scheduling, the queue fill status checks can potentially race, leading to dma queue entries being overwritten. Fix this by deferring packets from drv_tx calls to the tx worker, in order to ensure that all regular queue tx comes from the same context. Reported-by: Ryder Lee <Ryder.Lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: use atomic iface iteration for pre-TBTT workJohannes Berg
In addition to the previous series I posted, over time I'd also like to get rid of the iflist_mtx in mac80211. That isn't easy now since lots of places use iteration and would have to be audited, but even a cursory look suggests that mt76 might be more problematic than most since holding the wiphy lock for the latency-sensitive pre-TBTT work could be an issue. Convert the pre-TBTT work to use atomic iteration and then sending the device commands outside of it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7603: disable A-MSDU tx support on MT7628Felix Fietkau
It was reported that this can cause the PSE hang issues, even with a low number of fragments. Link: https://github.com/openwrt/mt76/issues/793#issuecomment-1676529138 Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7603: add missing register initialization for MT7628Felix Fietkau
Ported from the vendor driver code Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7603: improve stuck beacon handlingFelix Fietkau
Before preparing the new beacon, check the queue status, flush out all previous beacons and buffered multicast packets, then (if necessary) try to recover more gracefully from a stuck beacon condition by making a less invasive attempt at getting the MAC un-stuck. Fixes: c8846e101502 ("mt76: add driver for MT7603E and MT7628/7688") Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7603: improve watchdog reset reliablityFelix Fietkau
Only trigger PSE reset if PSE was stuck, otherwise it can cause DMA issues. Trigger the PSE reset while DMA is fully stopped in order to improve reliabilty. Fixes: c8846e101502 ("mt76: add driver for MT7603E and MT7628/7688") Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-30wifi: mt76: mt7603: rework/fix rx pse hang checkFelix Fietkau
It turns out that the code in mt7603_rx_pse_busy() does not detect actual hardware hangs, it only checks for busy conditions in PSE. A reset should only be performed if these conditions are true and if there is no rx activity as well. Reset the counter whenever a rx interrupt occurs. In order to also deal with a fully loaded CPU that leaves interrupts disabled with continuous NAPI polling, also check for pending rx interrupts in the function itself. Fixes: c8846e101502 ("mt76: add driver for MT7603E and MT7628/7688") Signed-off-by: Felix Fietkau <nbd@nbd.name>
2023-09-29wifi: mac80211: add back SPDX identifierJohannes Berg
Looks like I lost that by accident, add it back. Fixes: 076fc8775daf ("wifi: cfg80211: remove wdev mutex") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-29wifi: mac80211: fix ieee80211_drop_unencrypted_mgmt return type/valueJohannes Berg
Somehow, I managed to botch this and pretty much completely break wifi. My original patch did contain these changes, but I seem to have lost them before sending to the list. Fix it now. Reported-and-tested-by: Kalle Valo <kvalo@kernel.org> Fixes: 6c02fab72429 ("wifi: mac80211: split ieee80211_drop_unencrypted_mgmt() return value") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-09-28Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo
ath.git patches for v6.7. Major changes: ath12k * WCN7850: enable 320 MHz channels in 6 GHz band * WCN7850: hardware rfkill support * WCN7850: enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to make scan faster ath11k * add chip id board name while searching board-2.bin
2023-09-28wifi: rtlwifi: cleanup few rtlxxxx_set_hw_reg() routinesDmitry Antipov
Since 'u8' comparison against zero is always false, drop the corresponding branches of AMPDU_MIN_SPACE adjustment within 'rtlxxxx_set_hw_reg()' for rtl8188ee, rtl8192ce, rtl8192de, rtl8723ae, rtl8723be, and rtl8821ae. Compile tested only. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230925090452.25633-1-dmantipov@yandex.ru
2023-09-28wifi: rtw89: declare MCC in interface combinationZong-Zhe Yang
MCC (multi-channel concurrency) supports two combinations as below. * P2P-GO + STA * P2P-GC + STA We add the corresponding ieee80211_iface_limit for it into ieee80211_iface_combination. Besides, for multiple channels, it must run with mac80211 chanctx. So, only with it, ieee80211_iface_combination can allow MCC case. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230921003559.11588-5-pkshih@realtek.com
2023-09-28wifi: rtw89: 8852c: declare to support two chanctxZong-Zhe Yang
We are going to allow RTL8852C to support MCC (multi-channel concurrency). So, we increase 8852c::support_chanctx_num up to 2. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230921003559.11588-4-pkshih@realtek.com
2023-09-28wifi: rtw89: pause/proceed MCC for ROC and HW scanZong-Zhe Yang
During (TDMA-based) MCC (multi-channel concurrency), the below two cases might not have a good behavior on channel usage. * ROC (remain on channel) * HW scan So, we tend to separate them from MCC. The two cases would expect to operate the channel to which they want. However, during MCC, channels are scheduled by FW MCC state mechanism. So, channels cannot be controlled explicitly. To avoid the two cases from operating wrong channels with chance, we pause MCC (essentially stop FW MCC) once the two cases are coming. And then, we proceed MCC again (essentially restart FW MCC) once the two cases finish. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230921003559.11588-3-pkshih@realtek.com
2023-09-28wifi: rtw89: mcc: fix NoA start time when GO is auxiliaryZong-Zhe Yang
Under TDMA-based MCC (multi-channel concurrency), there are two roles, reference and auxiliary. We arrange MCC timeline based on time domain of reference role. Then, we calculate NoA start time according to MCC timeline. Besides, when MCC runs GO+STA mode, we plan an offset between GO time domain and STA time domain to make their TBTTs have a time gap. However, if GO is auxiliary role instead of reference role, NoA start time is described by STA time domain instead of GO time domain. To fix this, we apply the offset mentioned above to NoA start time to convert time domain from STA to GO. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230921003559.11588-2-pkshih@realtek.com
2023-09-28wifi: rt2x00: remove redundant check if u8 array element is less than zeroColin Ian King
The check on vga_gain[ch_idx] being less than zero is always false since vga_gain is a u8 array. Clean up the code by removing the check and the following assignment. Cleans up clang scan build warning: drivers/net/wireless/ralink/rt2x00/rt2800lib.c:9704:26: warning: result of comparison of unsigned expression < 0 is always false [-Wtautological-unsigned-zero-compare] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230920121240.120455-1-colin.i.king@gmail.com
2023-09-28wifi: ath11k: mac: fix struct ieee80211_sband_iftype_data handlingKalle Valo
Commit e8c1841278a7 ("wifi: cfg80211: annotate iftype_data pointer with sparse") added sparse checks for struct ieee80211_sband_iftype_data handling which immediately found an issue in ath11k: drivers/net/wireless/ath/ath11k/mac.c:7952:22: warning: incorrect type in argument 1 (different address spaces) drivers/net/wireless/ath/ath11k/mac.c:7952:22: expected struct ieee80211_sta_he_cap const *he_cap drivers/net/wireless/ath/ath11k/mac.c:7952:22: got struct ieee80211_sta_he_cap const [noderef] __iftype_data * The problem here is that we are accessing sband->iftype_data directly even though we should use for_each_sband_iftype_data() or similar. Fortunately there's ieee80211_get_he_iftype_cap_vif() which is just what we need here so use it to get HE capabilities. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.23 Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230927142708.2897504-2-kvalo@kernel.org
2023-09-28wifi: ath11k: fix ath11k_mac_op_remain_on_channel() stack usageDmitry Antipov
When compiling with clang 16.0.6, I've noticed the following: drivers/net/wireless/ath/ath11k/mac.c:8903:12: warning: stack frame size (1032) exceeds limit (1024) in 'ath11k_mac_op_remain_on_channel' [-Wframe-larger-than] static int ath11k_mac_op_remain_on_channel(struct ieee80211_hw *hw, ^ 68/1032 (6.59%) spills, 964/1032 (93.41%) variables So switch to kzalloc()'ed instance of 'struct scan_req_params' like it's done in 'ath11k_mac_op_hw_scan()'. Compile tested only. Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230926042906.13725-1-dmantipov@yandex.ru
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-28 23:42:34 +0000