summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-10-29net: mvmdio: slight optimisation of orion_mdio_writeLeigh Brown
Make only a single call to mutex_unlock in orion_mdio_write. Signed-off-by: Leigh Brown <leigh@solinno.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29net: mvmdio: orion_mdio_ready: remove manual pollLeigh Brown
Replace manual poll of MVMDIO_SMI_READ_VALID with a call to orion_mdio_wait_ready. This ensures a consistent timeout, eliminates a busy loop, and allows for use of interrupts on systems that support them. Signed-off-by: Leigh Brown <leigh@solinno.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29net: mvmdio: make orion_mdio_wait_ready consistentLeigh Brown
Amend orion_mdio_wait_ready so that the same timeout is used when polling or using wait_event_timeout. Set the timeout to 1ms. Replace udelay with usleep_range to avoid a busy loop, and set the polling interval range as 45us to 55us, so that the first sleep will be enough in almost all cases. Generate the same log message at timeout when polling or using wait_event_timeout. Signed-off-by: Leigh Brown <leigh@solinno.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29net/benet: Make lancer_wait_ready() staticGavin Shan
The function needn't to be public, so to make it as static. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29net/benet: Remove interface typeGavin Shan
The interface type, which is being traced by "struct be_adapter:: if_type", isn't used currently. So we can remove that safely according to Sathya's comments. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29netconsole: Convert to pr_<level>Joe Perches
Use a more current logging style. Convert printks to pr_<level>. Consolidate multiple printks into a single printk to avoid any possible dmesg interleaving. Add a default "event" msg in case the listed types are ever expanded. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29bridge: pass correct vlan id to multicast codeVlad Yasevich
Currently multicast code attempts to extrace the vlan id from the skb even when vlan filtering is disabled. This can lead to mdb entries being created with the wrong vlan id. Pass the already extracted vlan id to the multicast filtering code to make the correct id is used in creation as well as lookup. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Acked-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29Merge branch 'fixes' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitch Jesse Gross says: ==================== One patch for net/3.12 fixing an issue where devices could be in an invalid state they are removed while still attached to OVS. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29net: x25: Fix dead URLs in KconfigMichael Drüing
Update the URLs in the Kconfig file to the new pages at sangoma.com and cisco.com Signed-off-by: Michael Drüing <michael@drueing.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29net: sched: cls_bpf: add BPF-based classifierDaniel Borkmann
This work contains a lightweight BPF-based traffic classifier that can serve as a flexible alternative to ematch-based tree classification, i.e. now that BPF filter engine can also be JITed in the kernel. Naturally, tc actions and policies are supported as well with cls_bpf. Multiple BPF programs/filter can be attached for a class, or they can just as well be written within a single BPF program, that's really up to the user how he wishes to run/optimize the code, e.g. also for inversion of verdicts etc. The notion of a BPF program's return/exit codes is being kept as follows: 0: No match -1: Select classid given in "tc filter ..." command else: flowid, overwrite the default one As a minimal usage example with iproute2, we use a 3 band prio root qdisc on a router with sfq each as leave, and assign ssh and icmp bpf-based filters to band 1, http traffic to band 2 and the rest to band 3. For the first two bands we load the bytecode from a file, in the 2nd we load it inline as an example: echo 1 > /proc/sys/net/core/bpf_jit_enable tc qdisc del dev em1 root tc qdisc add dev em1 root handle 1: prio bands 3 priomap 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 tc qdisc add dev em1 parent 1:1 sfq perturb 16 tc qdisc add dev em1 parent 1:2 sfq perturb 16 tc qdisc add dev em1 parent 1:3 sfq perturb 16 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/ssh.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/icmp.bpf flowid 1:1 tc filter add dev em1 parent 1: bpf run bytecode-file /etc/tc/http.bpf flowid 1:2 tc filter add dev em1 parent 1: bpf run bytecode "`bpfc -f tc -i misc.ops`" flowid 1:3 BPF programs can be easily created and passed to tc, either as inline 'bytecode' or 'bytecode-file'. There are a couple of front-ends that can compile opcodes, for example: 1) People familiar with tcpdump-like filters: tcpdump -iem1 -ddd port 22 | tr '\n' ',' > /etc/tc/ssh.bpf 2) People that want to low-level program their filters or use BPF extensions that lack support by libpcap's compiler: bpfc -f tc -i ssh.ops > /etc/tc/ssh.bpf ssh.ops example code: ldh [12] jne #0x800, drop ldb [23] jneq #6, drop ldh [20] jset #0x1fff, drop ldxb 4 * ([14] & 0xf) ldh [%x + 14] jeq #0x16, pass ldh [%x + 16] jne #0x16, drop pass: ret #-1 drop: ret #0 It was chosen to load bytecode into tc, since the reverse operation, tc filter list dev em1, is then able to show the exact commands again. Possible follow-up work could also include a small expression compiler for iproute2. Tested with the help of bmon. This idea came up during the Netfilter Workshop 2013 in Copenhagen. Also thanks to feedback from Eric Dumazet! Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29bgmac: separate RX descriptor setup code into a new functionRafał Miłecki
This cleans code a bit and will be useful when allocating buffers in other places (like RX path, to avoid skb_copy_from_linear_data_offset). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== This pull request contains the following netfilter fix: * fix --queue-bypass in xt_NFQUEUE revision 3. While adding the revision 3 of this target, the bypass flags were not correctly handled anymore, thus, breaking packet bypassing if no application is listening from userspace, patch from Holger Eitzenberger, reported by Florian Westphal. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29MIPS: Perf: Fix 74K cache mapDeng-Cheng Zhu
According to Software User's Manual, the event of last-level-cache read/write misses is mapped to even counters. Odd counters of that event number count miss cycles. Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6036/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-10-29Fix a few incorrectly checked [io_]remap_pfn_range() callsLinus Torvalds
Nico Golde reports a few straggling uses of [io_]remap_pfn_range() that really should use the vm_iomap_memory() helper. This trivially converts two of them to the helper, and comments about why the third one really needs to continue to use remap_pfn_range(), and adds the missing size check. Reported-by: Nico Golde <nico@ngolde.de> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org.
2013-10-29Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf tooling fixes from Ingo Molnar: "This contains five tooling fixes: - fix a remaining mmap2 assumption which resulted in perf top output breakage - fix mmap ring-buffer processing bug that corrupts data - fix for a severe python scripting memory leak - fix broken (and user-visible) -g option handling - fix stdio output The diffstat size is larger than what we'd like to see this late :-/" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Fixup mmap event consumption perf top: Split -G and --call-graph perf record: Split -g and --call-graph perf hists: Add color overhead for stdio output buffer perf tools: Fix up /proc/PID/maps parsing perf script python: Fix mem leak due to missing Py_DECREFs on dict entries
2013-10-29Kconfig: make KOBJECT_RELEASE debugging require timer debuggingLinus Torvalds
Without the timer debugging, the delayed kobject release will just result in undebuggable oopses if it triggers any latent bugs. That doesn't actually help debugging at all. So make DEBUG_KOBJECT_RELEASE depend on DEBUG_OBJECTS_TIMERS to avoid having people enable one without the other. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-29drm/i915: Fix the PPT fdi lane bifurcate state handling on ivbDaniel Vetter
Originally I've thought that this is leftover hw state dirt from the BIOS. But after way too much helpless flailing around on my part I've noticed that the actual bug is when we change the state of an already active pipe. For example when we change the fdi lines from 2 to 3 without switching off outputs in-between we'll never see the crucial on->off transition in the ->modeset_global_resources hook the current logic relies on. Patch version 2 got this right by instead also checking whether the pipe is indeed active. But that in turn broke things when pipes have been turned off through dpms since the bifurcate enabling is done in the ->crtc_mode_set callback. To address this issues discussed with Ville in the patch review move the setting of the bifurcate bit into the ->crtc_enable hook. That way we won't wreak havoc with this state when userspace puts all other outputs into dpms off state. This also moves us forward with our overall goal to unify the modeset and dpms on paths (which we need to have to allow runtime pm in the dpms off state). Unfortunately this requires us to move the bifurcate helpers around a bit. Also update the commit message, I've misanalyzed the bug rather badly. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70507 Tested-by: Jan-Michael Brummer <jan.brummer@tabos.org> Cc: stable@vger.kernel.org Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-29netfilter: xt_NFQUEUE: fix --queue-bypass regressionHolger Eitzenberger
V3 of the NFQUEUE target ignores the --queue-bypass flag, causing packets to be dropped when the userspace listener isn't running. Regression is in since 8746ddcf12bb26 ("netfilter: xt_NFQUEUE: introduce CPU fanout"). Reported-by: Florian Westphal <fw@strlen.de> Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-10-29i40e: fix error return code in i40e_probe()Wei Yongjun
Fix to return -ENOMEM in the memory alloc error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-10-29ixgbevf: Add zero_base handler to network statisticsDon Skidmore
This patch removes the need to keep a zero_base variable in the adapter structure. Now we just use two different macros to set the non-zero and zero base. This adds to readability and shortens some of the structure initialization under 80 columns. The gathering of status for ethtool was slightly modified to again better fit into 80 columns and become a bit more readable. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-10-29ixgbevf: add BP_EXTENDED_STATS for CONFIG_NET_RX_BUSY_POLLJacob Keller
This patch adds the extended statistics similar to the ixgbe driver. These statistics keep track of how often the busy polling yields, as well as how many packets are cleaned or missed by the polling routine. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-10-29ixgbevf: implement CONFIG_NET_RX_BUSY_POLLJacob Keller
This patch enables CONFIG_NET_RX_BUSY_POLL support in the VF code. This enables sockets which have enabled the SO_BUSY_POLL socket option to use the ndo_busy_poll_recv operation which could result in lower latency, at the cost of higher CPU utilization, and increased power usage. This support is similar to how the ixgbe driver works. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-10-29perf/x86: Fix NMI measurementsPeter Zijlstra
OK, so what I'm actually seeing on my WSM is that sched/clock.c is 'broken' for the purpose we're using it for. What triggered it is that my WSM-EP is broken :-( [ 0.001000] tsc: Fast TSC calibration using PIT [ 0.002000] tsc: Detected 2533.715 MHz processor [ 0.500180] TSC synchronization [CPU#0 -> CPU#6]: [ 0.505197] Measured 3 cycles TSC warp between CPUs, turning off TSC clock. [ 0.004000] tsc: Marking TSC unstable due to check_tsc_sync_source failed For some reason it consistently detects TSC skew, even though NHM+ should have a single clock domain for 'reasonable' systems. This marks sched_clock_stable=0, which means that we do fancy stuff to try and get a 'sane' clock. Part of this fancy stuff relies on the tick, clearly that's gone when NOHZ=y. So for idle cpus time gets stuck, until it either wakes up or gets kicked by another cpu. While this is perfectly fine for the scheduler -- it only cares about actually running stuff, and when we're running stuff we're obviously not idle. This does somewhat break down for perf which can trigger events just fine on an otherwise idle cpu. So I've got NMIs get get 'measured' as taking ~1ms, which actually don't last nearly that long: <idle>-0 [013] d.h. 886.311970: rcu_nmi_enter <-do_nmi ... <idle>-0 [013] d.h. 886.311997: perf_sample_event_took: HERE!!! : 1040990 So ftrace (which uses sched_clock(), not the fancy bits) only sees ~27us, but we measure ~1ms !! Now since all this measurement stuff lives in x86 code, we can actually fix it. Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: mingo@kernel.org Cc: dave.hansen@linux.intel.com Cc: eranian@google.com Cc: Don Zickus <dzickus@redhat.com> Cc: jmario@redhat.com Cc: acme@infradead.org Link: http://lkml.kernel.org/r/20131017133350.GG3364@laptop.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-29perf: Fix perf ring buffer memory orderingPeter Zijlstra
The PPC64 people noticed a missing memory barrier and crufty old comments in the perf ring buffer code. So update all the comments and add the missing barrier. When the architecture implements local_t using atomic_long_t there will be double barriers issued; but short of introducing more conditional barrier primitives this is the best we can do. Reported-by: Victor Kaplansky <victork@il.ibm.com> Tested-by: Victor Kaplansky <victork@il.ibm.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: michael@ellerman.id.au Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: anton@samba.org Cc: benh@kernel.crashing.org Link: http://lkml.kernel.org/r/20131025173749.GG19466@laptop.lan Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-29ixgbevf: have clean_rx_irq return total_rx_packets cleanedJacob Keller
Rather than return true/false indicating whether there was budget left, return the total packets cleaned. This currently has no use, but will be used in a following patch which enables CONFIG_NET_RX_BUSY_POLL support in order to track how many packets were cleaned during the busy poll as part of the extended statistics. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-10-29ixgbevf: add ixgbevf_rx_skbJacob Keller
This patch adds ixgbevf_rx_skb in line with how ixgbe handles the variations on how packets can be received. It will be extended in a following patch for CONFIG_NET_RX_BUSY_POLL support. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-10-29ixgbe: remove unnecessary duplication of PCIe bandwidth displayJacob Keller
This patch removes the unnecessary display of PCIe bandwidth twice. Since the ixgbe_check_minimum_link does a better job, and ensures accurate detection on even complex chains, this older check is no longer necessary. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-10-29ixgbe: show <2% for encoding loss on PCIe Gen3Jacob Keller
This patch updates the ixgbe_check_minimum_link function to correctly show that there is some minor loss of encoding, even though we don't calculate it in the max GT/s equation. It is small enough to not bother, but is better to report it than not. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-10-29mm: Account for a THP NUMA hinting update as one PTE updateMel Gorman
A THP PMD update is accounted for as 512 pages updated in vmstat. This is large difference when estimating the cost of automatic NUMA balancing and can be misleading when comparing results that had collapsed versus split THP. This patch addresses the accounting issue. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: <stable@kernel.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1381141781-10992-10-git-send-email-mgorman@suse.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-29mm: Close races between THP migration and PMD numa clearingMel Gorman
THP migration uses the page lock to guard against parallel allocations but there are cases like this still open Task A Task B --------------------- --------------------- do_huge_pmd_numa_page do_huge_pmd_numa_page lock_page mpol_misplaced == -1 unlock_page goto clear_pmdnuma lock_page mpol_misplaced == 2 migrate_misplaced_transhuge pmd = pmd_mknonnuma set_pmd_at During hours of testing, one crashed with weird errors and while I have no direct evidence, I suspect something like the race above happened. This patch extends the page lock to being held until the pmd_numa is cleared to prevent migration starting in parallel while the pmd_numa is being cleared. It also flushes the old pmd entry and orders pagetable insertion before rmap insertion. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: <stable@kernel.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1381141781-10992-9-git-send-email-mgorman@suse.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-29mm: numa: Sanitize task_numa_fault() callsitesMel Gorman
There are three callers of task_numa_fault(): - do_huge_pmd_numa_page(): Accounts against the current node, not the node where the page resides, unless we migrated, in which case it accounts against the node we migrated to. - do_numa_page(): Accounts against the current node, not the node where the page resides, unless we migrated, in which case it accounts against the node we migrated to. - do_pmd_numa_page(): Accounts not at all when the page isn't migrated, otherwise accounts against the node we migrated towards. This seems wrong to me; all three sites should have the same sementaics, furthermore we should accounts against where the page really is, we already know where the task is. So modify all three sites to always account; we did after all receive the fault; and always account to where the page is after migration, regardless of success. They all still differ on when they clear the PTE/PMD; ideally that would get sorted too. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: <stable@kernel.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1381141781-10992-8-git-send-email-mgorman@suse.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-29mm: Prevent parallel splits during THP migrationMel Gorman
THP migrations are serialised by the page lock but on its own that does not prevent THP splits. If the page is split during THP migration then the pmd_same checks will prevent page table corruption but the unlock page and other fix-ups potentially will cause corruption. This patch takes the anon_vma lock to prevent parallel splits during migration. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: <stable@kernel.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1381141781-10992-7-git-send-email-mgorman@suse.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-29mm: Wait for THP migrations to complete during NUMA hinting faultsMel Gorman
The locking for migrating THP is unusual. While normal page migration prevents parallel accesses using a migration PTE, THP migration relies on a combination of the page_table_lock, the page lock and the existance of the NUMA hinting PTE to guarantee safety but there is a bug in the scheme. If a THP page is currently being migrated and another thread traps a fault on the same page it checks if the page is misplaced. If it is not, then pmd_numa is cleared. The problem is that it checks if the page is misplaced without holding the page lock meaning that the racing thread can be migrating the THP when the second thread clears the NUMA bit and faults a stale page. This patch checks if the page is potentially being migrated and stalls using the lock_page if it is potentially being migrated before checking if the page is misplaced or not. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: <stable@kernel.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1381141781-10992-6-git-send-email-mgorman@suse.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-29mm: numa: Do not account for a hinting fault if we racedMel Gorman
If another task handled a hinting fault in parallel then do not double account for it. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: <stable@kernel.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1381141781-10992-5-git-send-email-mgorman@suse.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-29ixgbe: fix qv_lock_napi call in ixgbe_napi_disable_allJacob Keller
ixgbe_napi_disable_all calls napi_disable on each queue, however the busy polling code introduced a local_bh_disable()d context around the napi_disable. The original author did not realize that napi_disable might sleep, which would cause a sleep while atomic BUG. In addition, on a single processor system, the ixgbe_qv_lock_napi loop shouldn't have to mdelay. This patch adds an ixgbe_qv_disable along with a new IXGBE_QV_STATE_DISABLED bit, which it uses to indicate to the poll and napi routines that the q_vector has been disabled. Now the ixgbe_napi_disable_all function will wait until all pending work has been finished and prevent any future work from being started. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Cc: Eliezer Tamir <eliezer.tamir@linux.intel.com> Cc: Alexander Duyck <alexander.duyck@intel.com> Cc: Hyong-Youb Kim <hykim@myri.com> Cc: Amir Vadai <amirv@mellanox.com> Cc: Dmitry Kravkov <dmitry@broadcom.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-10-29net: add might_sleep() call to napi_disableJacob Keller
napi_disable uses an msleep() call to wait for outstanding napi work to be finished after setting the disable bit. It does not always sleep incase there was no outstanding work. This resulted in a rare bug in ixgbe_down operation where a napi_disable call took place inside of a local_bh_disable()d context. In order to enable easier detection of future sleep while atomic BUGs, this patch adds a might_sleep() call, so that every use of napi_disable during atomic context will be visible. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Cc: Eliezer Tamir <eliezer.tamir@linux.intel.com> Cc: Alexander Duyck <alexander.duyck@intel.com> Cc: Hyong-Youb Kim <hykim@myri.com> Cc: Amir Vadai <amirv@mellanox.com> Cc: Dmitry Kravkov <dmitry@broadcom.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-10-29vxlan: Have the NIC drivers do less work for offloadsJoseph Gasparakis
This patch removes the burden from the NIC drivers to check if the vxlan driver is enabled in the kernel and also makes available the vxlan headrooms to them. Signed-off-by: Joseph Gasparakis <joseph.gasparakis@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-10-29Merge tag 'perf-urgent-for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: * Add color overhead for stdio output buffer, which fixes --stdio output being chopped up on the hot (red) entries, fix from Jiri Olsa. * Get 'perf record -g -a sleep 1' working again, removing the need for -- separating perf options from the workload, restoring ages old behaviour, fix from Jiri Olsa. More patches allowing ~/.perfconfig setting up of default callchain collecting method ("fp" or "dwarf") left for next merge window. * Fixup mmap event consumption, where we were acking the consumption by writing the tail before actually accessing the event, which could lead to using overwritten records in things like 'perf record --call-graph'. From Zhouyi Zhou. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-10-29net: esp{4,6}: get rid of struct esp_dataMathias Krause
struct esp_data consists of a single pointer, vanishing the need for it to be a structure. Fold the pointer into 'data' direcly, removing one level of pointer indirection. Signed-off-by: Mathias Krause <mathias.krause@secunet.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-10-29net: esp{4,6}: remove padlen from struct esp_dataMathias Krause
The padlen member of struct esp_data is always zero. Get rid of it. Signed-off-by: Mathias Krause <mathias.krause@secunet.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-10-29xen-netback: use jiffies_64 value to calculate credit timeoutWei Liu
time_after_eq() only works if the delta is < MAX_ULONG/2. For a 32bit Dom0, if netfront sends packets at a very low rate, the time between subsequent calls to tx_credit_exceeded() may exceed MAX_ULONG/2 and the test for timer_after_eq() will be incorrect. Credit will not be replenished and the guest may become unable to send packets (e.g., if prior to the long gap, all credit was exhausted). Use jiffies_64 variant to mitigate this problem for 32bit Dom0. Suggested-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Wei Liu <wei.liu2@citrix.com> Reviewed-by: David Vrabel <david.vrabel@citrix.com> Cc: Ian Campbell <ian.campbell@citrix.com> Cc: Jason Luan <jianhai.luan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29net, mc: fix the incorrect comments in two mc-related functionsZhi Yong Wu
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29net, iovec: fix the incorrect comment in memcpy_fromiovecend()Zhi Yong Wu
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29net, datagram: fix the incorrect comment in zerocopy_sg_from_iovec()Zhi Yong Wu
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29vxlan: silence one build warningZhi Yong Wu
drivers/net/vxlan.c: In function ‘vxlan_sock_add’: drivers/net/vxlan.c:2298:11: warning: ‘sock’ may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/net/vxlan.c:2275:17: note: ‘sock’ was declared here LD drivers/net/built-in.o Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29ipv4: fix DO and PROBE pmtu mode regarding local fragmentation with UFO/CORKHannes Frederic Sowa
UFO as well as UDP_CORK do not respect IP_PMTUDISC_DO and IP_PMTUDISC_PROBE well enough. UFO enabled packet delivery just appends all frags to the cork and hands it over to the network card. So we just deliver non-DF udp fragments (DF-flag may get overwritten by hardware or virtual UFO enabled interface). UDP_CORK does enqueue the data until the cork is disengaged. At this point it sets the correct IP_DF and local_df flags and hands it over to ip_fragment which in this case will generate an icmp error which gets appended to the error socket queue. This is not reflected in the syscall error (of course, if UFO is enabled this also won't happen). Improve this by checking the pmtudisc flags before appending data to the socket and if we still can fit all data in one packet when IP_PMTUDISC_DO or IP_PMTUDISC_PROBE is set, only then proceed. We use (mtu-fragheaderlen) to check for the maximum length because we ensure not to generate a fragment and non-fragmented data does not need to have its length aligned on 64 bit boundaries. Also the passed in ip_options are already aligned correctly. Maybe, we can relax some other checks around ip_fragment. This needs more research. Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29cxgb3: Fix length calculation in write_ofld_wr() on 32-bit architecturesBen Hutchings
The length calculation here is now invalid on 32-bit architectures, since sk_buff::tail is a pointer and sk_buff::transport_header is an integer offset: drivers/net/ethernet/chelsio/cxgb3/sge.c: In function 'write_ofld_wr': drivers/net/ethernet/chelsio/cxgb3/sge.c:1603:9: warning: passing argument 4 of 'make_sgl' makes integer from pointer without a cast [enabled by default] adap->pdev); ^ drivers/net/ethernet/chelsio/cxgb3/sge.c:964:28: note: expected 'unsigned int' but argument is of type 'sk_buff_data_t' static inline unsigned int make_sgl(const struct sk_buff *skb, ^ Use the appropriate skb accessor functions. Compile-tested only. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Fixes: 1a37e412a022 ('net: Use 16bits for *_headers fields of struct skbuff') Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29bnx2x: Disable VF access on PF removalAriel Elior
When the bnx2x driver is rmmoded, if VFs of a given PF will be assigned to a VM then that PF will be unable to call `pci_disable_sriov()'. If for that same PF there would also exist unassigned VFs in the hypervisor, the result will be that after the removal there will still be virtual PCI functions on the hypervisor. If the bnx2x module were to be re-inserted, the result will be that the VFs on the hypervisor will be re-probed directly following the PF's probe, even though that in regular loading flow sriov is only enabled once PF is loaded. The probed VF will then try to access its bar, causing a PCI error as the HW is not in a state enabling such a request. This patch adds a missing disablement procedure to the PF's removal, one that sets registers viewable to the VF to indicate that the VFs have no permission to access the bar, thus resulting in probe errors instead of PCI errors. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29bnx2x: prevent FW assert on low mem during unloadDmitry Kravkov
Buffers for FW statistics were allocated at an inappropriate time; In a machine where the driver encounters problems allocating all of its queues, the driver would still create FW requests for the statistics of the non-existing queues. The wrong order of memory allocation could lead to zeroed statistics messages being sent, leading to fw assert in case function 0 was down. This changes the order of allocations, guaranteeing that statistic requests will only be generated for actual queues. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-29tcp: gso: fix truesize trackingEric Dumazet
commit 6ff50cd55545 ("tcp: gso: do not generate out of order packets") had an heuristic that can trigger a warning in skb_try_coalesce(), because skb->truesize of the gso segments were exactly set to mss. This breaks the requirement that skb->truesize >= skb->len + truesizeof(struct sk_buff); It can trivially be reproduced by : ifconfig lo mtu 1500 ethtool -K lo tso off netperf As the skbs are looped into the TCP networking stack, skb_try_coalesce() warns us of these skb under-estimating their truesize. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 13:32:12 +0000