| Age | Commit message (Collapse) | Author |
|---|
|
change_bit implementation for XCHAL_HAVE_EXCLUSIVE case changes all bits
except the one required due to copy-paste error from clear_bit.
Cc: stable@vger.kernel.org # v5.2+
Fixes: f7c34874f04a ("xtensa: add exclusive atomics support")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
This reverts commit 883a2a80f79ca5c0c105605fafabd1f3df99b34c.
Apparently use dmi_get_bios_year() as manufacturing date isn't accurate
and this breaks older laptops with new BIOS update.
So let's revert this patch.
There are still new HP laptops still need to use SMBus to support all
features, but it'll be enabled via a whitelist.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191001070845.9720-1-kai.heng.feng@canonical.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
There is an arbitrary difference between the system resume and
runtime resume code paths for PCI devices regarding the delay to
apply when switching the devices from D3cold to D0.
Namely, pci_restore_standard_config() used in the runtime resume
code path calls pci_set_power_state() which in turn invokes
__pci_start_power_transition() to power up the device through the
platform firmware and that function applies the transition delay
(as per PCI Express Base Specification Revision 2.0, Section 6.6.1).
However, pci_pm_default_resume_early() used in the system resume
code path calls pci_power_up() which doesn't apply the delay at
all and that causes issues to occur during resume from
suspend-to-idle on some systems where the delay is required.
Since there is no reason for that difference to exist, modify
pci_power_up() to follow pci_set_power_state() more closely and
invoke __pci_start_power_transition() from there to call the
platform firmware to power up the device (in case that's necessary).
Fixes: db288c9c5f9d ("PCI / PM: restore the original behavior of pci_set_power_state()")
Reported-by: Daniel Drake <drake@endlessm.com>
Tested-by: Daniel Drake <drake@endlessm.com>
Link: https://lore.kernel.org/linux-pm/CAD8Lp44TYxrMgPLkHCqF9hv6smEurMXvmmvmtyFhZ6Q4SE+dig@mail.gmail.com/T/#m21be74af263c6a34f36e0fc5c77c5449d9406925
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: 3.10+ <stable@vger.kernel.org> # 3.10+
|
|
Pull virtio fixes from Michael Tsirkin:
"Some minor bugfixes"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost/test: stop device before reset
tools/virtio: xen stub
tools/virtio: more stubs
|
|
virt device tree incorrectly uses 0xf0000000 on both sides of PCI IO
ports address space mapping. This results in incorrect port address
assignment in PCI IO BARs and subsequent crash on attempt to access
them. Use 0 as base address in PCI IO ports address space.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Five changes, two in drivers (qla2xxx, zfcp), one to MAINTAINERS
(qla2xxx) and two in the core.
The last two are mostly about removing incorrect messages from the
kernel log: the resid message is definitely wrong and the sync cache
on protected drive problem is arguably wrong"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: MAINTAINERS: Update qla2xxx driver
scsi: zfcp: fix reaction on bit error threshold notification
scsi: core: save/restore command resid for error handling
scsi: qla2xxx: Remove WARN_ON_ONCE in qla2x00_status_cont_entry()
scsi: sd: Ignore a failure to sync cache due to lack of authorization
|
|
HAVE_FAST_GUP enables the lockless quick page table walker for simple
cases, and is a nice optimization for some random loads that can then
use get_user_pages_fast() rather than the more careful page walker.
However, for some unexplained reason, it seems to be subtly broken on
sparc64. The breakage is only with some compiler versions and some
hardware, and nobody seems to have figured out what triggers it,
although there's a simple reprodicer for the problem when it does
trigger.
The problem was introduced with the conversion to the generic GUP code
in commit 7b9afb86b632 ("sparc64: use the generic get_user_pages_fast
code"), but nothing looks obviously wrong in that conversion. It may be
a compiler bug that just hits us with the code reorganization. Or it
may be something very specific to sparc64.
This disables HAVE_FAST_GUP entirely. That makes things like futexes a
bit slower, but at least they work. If we can figure out the trigger,
that would be lovely, but it's been three months already..
Link: https://lore.kernel.org/lkml/20190717215956.GA30369@altlinux.org/
Fixes: 7b9afb86b632 ("sparc64: use the generic get_user_pages_fast code")
Reported-by: Dmitry V Levin <ldv@altlinux.org>
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Requested-by: Meelis Roos <mroos@linux.ee>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Panfrost uses multiple schedulers (one for each slot, so 2 in reality),
and on a timeout has to stop all the schedulers to safely perform a
reset. However more than one scheduler can trigger a timeout at the same
time. This race condition results in jobs being freed while they are
still in use.
When stopping other slots use cancel_delayed_work_sync() to ensure that
any timeout started for that slot has completed. Also use
mutex_trylock() to obtain reset_lock. This means that only one thread
attempts the reset, the other threads will simply complete without doing
anything (the first thread will wait for this in the call to
cancel_delayed_work_sync()).
While we're here and since the function is already dependent on
sched_job not being NULL, let's remove the unnecessary checks.
Fixes: aa20236784ab ("drm/panfrost: Prevent concurrent resets")
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191009094456.9704-1-steven.price@arm.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
- Fix a parisc-specific fallout of Christoph's
dma_set_mask_and_coherent() patches (Sven)
- Fix a vmap memory leak in ioremap()/ioremap() (Helge)
- Some minor cleanups and documentation updates (Nick, Helge)
* 'parisc-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Remove 32-bit DMA enforcement from sba_iommu
parisc: Fix vmap memory leak in ioremap()/iounmap()
parisc: prefer __section from compiler_attributes.h
parisc: sysctl.c: Use CONFIG_PARISC instead of __hppa_ define
MAINTAINERS: Add hp_sdc drivers to parisc arch
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
Pull dmi fix from Jean Delvare.
* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
firmware: dmi: Fix unlikely out-of-bounds read in save_mem_devices
|
|
64-bit time is a signed quantity in the kernel, so the bulkstat
structure should reflect that. Note that the structure size stays
the same and that we have not yet published userspace headers for this
new ioctl so there are no users to break.
Fixes: 7035f9724f84 ("xfs: introduce new v5 bulkstat structure")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
There is a warning message in my test with below steps:
# rbd bench --io-type write --io-size 4K --io-threads 1 --io-pattern rand test &
# sleep 5
# pkill -9 rbd
# rbd map test &
# sleep 5
# pkill rbd
The reason is that the rbd_add_acquire_lock() is interruptable,
that means, when we kill the waiting on ->acquire_wait, the lock_dwork
could be still running.
1. do_rbd_add() 2. lock_dwork
rbd_add_acquire_lock()
- queue_delayed_work()
lock_dwork queued
- wait_for_completion_killable_timeout() <-- kill happen
rbd_dev_image_unlock() <-- UNLOCKED now, nothing to do.
rbd_dev_device_release()
rbd_dev_image_release()
- ...
lock successed here
- cancel_delayed_work_sync(&rbd_dev->lock_dwork)
Then when we reach the rbd_dev_free(), WARN_ON is triggered because
lock_state is not RBD_LOCK_STATE_UNLOCKED.
To fix it, this commit make sure the lock_dwork was finished before
calling rbd_dev_image_unlock().
On the other hand, this would not happend in do_rbd_remove(), because
after rbd mapped, lock_dwork will only be queued for IO request, and
request will continue unless lock_dwork finished. when we call
rbd_dev_image_unlock() in do_rbd_remove(), all requests are done.
That means, lock_state should not be locked again after
rbd_dev_image_unlock().
[ Cancel lock_dwork in rbd_add_acquire_lock(), only if the wait is
interrupted. ]
Fixes: 637cd060537d ("rbd: new exclusive lock wait/wake code")
Signed-off-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
In the future, we're going to want to extend the ceph_reply_info_extra
for create replies. Currently though, the kernel code doesn't accept an
extra blob that is larger than the expected data.
Change the code to skip over any unrecognized fields at the end of the
extra blob, rather than returning -EIO.
Cc: stable@vger.kernel.org
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
IOMMU Event Log encodes 20-bit PASID for events:
ILLEGAL_DEV_TABLE_ENTRY
IO_PAGE_FAULT
PAGE_TAB_HARDWARE_ERROR
INVALID_DEVICE_REQUEST
as:
PASID[15:0] = bit 47:32
PASID[19:16] = bit 19:16
Note that INVALID_PPR_REQUEST event has different encoding
from the rest of the events as the following:
PASID[15:0] = bit 31:16
PASID[19:16] = bit 45:42
So, fixes the decoding logic.
Fixes: d64c0486ed50 ("iommu/amd: Update the PASID information printed to the system log")
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
As platform_get_irq() now prints an error when the interrupt does not
exist, calling it gratuitously causes scary messages like:
ipmmu-vmsa e6740000.mmu: IRQ index 0 not found
Fix this by moving the call to platform_get_irq() down, where the
existence of the interrupt is mandatory.
Fixes: 7723f4c5ecdb8d83 ("driver core: platform: Add an error message to platform_get_irq*()")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Till now the Rockchip iommu driver walked through the irq list via
platform_get_irq() until it encountered an ENXIO error. With the
recent change to add a central error message, this always results
in such an error for each iommu on probe and shutdown.
To not confuse people, switch to platform_count_irqs() to get the
actual number of interrupts before walking through them.
Fixes: 7723f4c5ecdb ("driver core: platform: Add an error message to platform_get_irq*()")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
There is a bug in create_safe_exec_page(), when page table is allocated
it is not checked that table is allocated successfully:
But it is dereferenced in: pgd_none(READ_ONCE(*pgdp)). Check that
allocation was successful.
Fixes: 82869ac57b5d ("arm64: kernel: Add support for hibernate/suspend-to-disk")
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
If CONFIG_ARM64_SVE=n then we fail to report ID_AA64ZFR0_EL1 as 0 when
read by userspace, despite being required by the architecture. Although
this is theoretically a change in ABI, userspace will first check for
the presence of SVE via the HWCAP or the ID_AA64PFR0_EL1.SVE field
before probing the ID_AA64ZFR0_EL1 register. Given that these are
reported correctly for this configuration, we can safely tighten up the
current behaviour.
Ensure ID_AA64ZFR0_EL1 is treated as RAZ when CONFIG_ARM64_SVE=n.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Dave Martin <dave.martin@arm.com>
Fixes: 06a916feca2b ("arm64: Expose SVE2 features for userspace")
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Merge more fixes from Andrew Morton:
"The usual shower of hotfixes and some followups to the recently merged
page_owner enhancements"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/memory-failure: poison read receives SIGKILL instead of SIGBUS if mmaped more than once
mm/slab.c: fix kernel-doc warning for __ksize()
xarray.h: fix kernel-doc warning
bitmap.h: fix kernel-doc warning and typo
fs/fs-writeback.c: fix kernel-doc warning
fs/libfs.c: fix kernel-doc warning
fs/direct-io.c: fix kernel-doc warning
mm, compaction: fix wrong pfn handling in __reset_isolation_pfn()
mm, hugetlb: allow hugepage allocations to reclaim as needed
lib/test_meminit: add a kmem_cache_alloc_bulk() test
mm/slub.c: init_on_free=1 should wipe freelist ptr for bulk allocations
lib/generic-radix-tree.c: add kmemleak annotations
mm/slub: fix a deadlock in show_slab_objects()
mm, page_owner: rename flag indicating that page is allocated
mm, page_owner: decouple freeing stack trace from debug_pagealloc
mm, page_owner: fix off-by-one error in __set_page_owner_handle()
|
|
We switch the default handler to be handle_bad_irq() instead of
handle_simple_irq() (which was not correct anyway).
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The driver wants to initialize related registers before IRQ chip will be added.
That's why move it to a corresponding callback. It also fixes the NULL pointer
dereference.
Fixes: 8f86a5b4ad67 ("gpio: merrifield: Pass irqchip when adding gpiochip")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The driver wants to initialize related registers before IRQ chip will be added.
That's why move it to a corresponding callback. It also fixes the NULL pointer
dereference.
Fixes: 7b1e889436a1 ("gpio: lynxpoint: Pass irqchip when adding gpiochip")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The driver wants to initialize related registers before IRQ chip will be added.
That's why move it to a corresponding callback. It also fixes the NULL pointer
dereference.
Fixes: 8069e69a9792 ("gpio: intel-mid: Pass irqchip when adding gpiochip")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
After changing the drivers to use GPIO core to add an IRQ chip
it appears that some of them requires a hardware initialization
before adding the IRQ chip.
Add an optional callback ->init_hw() to allow that drivers
to initialize hardware if needed.
This change is a part of the fix NULL pointer dereference
brought to the several drivers recently.
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
During conversion to internal IRQ chip initialization the commit
8f86a5b4ad67 ("gpio: merrifield: Pass irqchip when adding gpiochip")
lost the irq_base assignment.
drivers/gpio/gpio-merrifield.c: In function ‘mrfld_gpio_probe’:
drivers/gpio/gpio-merrifield.c:405:17: warning: variable ‘irq_base’ set but not used [-Wunused-but-set-variable]
Assign the girq->first to it.
Fixes: 8f86a5b4ad67 ("gpio: merrifield: Pass irqchip when adding gpiochip")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Custom outs*/ins* implementations are long gone from the xtensa port,
remove matching EXPORT_SYMBOLs.
This fixes the following build warnings issued by modpost since commit
15bfc2348d54 ("modpost: check for static EXPORT_SYMBOL* functions"):
WARNING: "insb" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "insw" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "insl" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "outsb" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "outsw" [vmlinux] is a static EXPORT_SYMBOL
WARNING: "outsl" [vmlinux] is a static EXPORT_SYMBOL
Cc: stable@vger.kernel.org
Fixes: d38efc1f150f ("xtensa: adopt generic io routines")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
more than once
Mmap /dev/dax more than once, then read the poison location using
address from one of the mappings. The other mappings due to not having
the page mapped in will cause SIGKILLs delivered to the process.
SIGKILL succeeds over SIGBUS, so user process loses the opportunity to
handle the UE.
Although one may add MAP_POPULATE to mmap(2) to work around the issue,
MAP_POPULATE makes mapping 128GB of pmem several magnitudes slower, so
isn't always an option.
Details -
ndctl inject-error --block=10 --count=1 namespace6.0
./read_poison -x dax6.0 -o 5120 -m 2
mmaped address 0x7f5bb6600000
mmaped address 0x7f3cf3600000
doing local read at address 0x7f3cf3601400
Killed
Console messages in instrumented kernel -
mce: Uncorrected hardware memory error in user-access at edbe201400
Memory failure: tk->addr = 7f5bb6601000
Memory failure: address edbe201: call dev_pagemap_mapping_shift
dev_pagemap_mapping_shift: page edbe201: no PUD
Memory failure: tk->size_shift == 0
Memory failure: Unable to find user space address edbe201 in read_poison
Memory failure: tk->addr = 7f3cf3601000
Memory failure: address edbe201: call dev_pagemap_mapping_shift
Memory failure: tk->size_shift = 21
Memory failure: 0xedbe201: forcibly killing read_poison:22434 because of failure to unmap corrupted page
=> to deliver SIGKILL
Memory failure: 0xedbe201: Killing read_poison:22434 due to hardware memory corruption
=> to deliver SIGBUS
Link: http://lkml.kernel.org/r/1565112345-28754-3-git-send-email-jane.chu@oracle.com
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Suggested-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix kernel-doc warning in mm/slab.c:
mm/slab.c:4215: warning: Function parameter or member 'objp' not described in '__ksize'
Also add Return: documentation section for this function.
Link: http://lkml.kernel.org/r/68c9fd7d-f09e-d376-e292-c7b2bdf1774d@infradead.org
Fixes: 10d1f8cb3965 ("mm/slab: refactor common ksize KASAN logic into slab_common.c")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix (Sphinx) kernel-doc warning in <linux/xarray.h>:
include/linux/xarray.h:232: WARNING: Unexpected indentation.
Link: http://lkml.kernel.org/r/89ba2134-ce23-7c10-5ee1-ef83b35aa984@infradead.org
Fixes: a3e4d3f97ec8 ("XArray: Redesign xa_alloc API")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix kernel-doc warning in <linux/bitmap.h>:
include/linux/bitmap.h:341: warning: Function parameter or member 'nbits' not described in 'bitmap_or_equal'
Also fix small typo (bitnaps).
Link: http://lkml.kernel.org/r/0729ea7a-2c0d-b2c5-7dd3-3629ee0803e2@infradead.org
Fixes: b9fa6442f704 ("cpumask: Implement cpumask_or_equal()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix kernel-doc warning in fs/fs-writeback.c:
fs/fs-writeback.c:913: warning: Excess function parameter 'nr_pages' description in 'cgroup_writeback_by_id'
Link: http://lkml.kernel.org/r/756645ac-0ce8-d47e-d30a-04d9e4923a4f@infradead.org
Fixes: d62241c7a406 ("writeback, memcg: Implement cgroup_writeback_by_id()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix kernel-doc warning in fs/libfs.c:
fs/libfs.c:496: warning: Excess function parameter 'available' description in 'simple_write_end'
Link: http://lkml.kernel.org/r/5fc9d70b-e377-0ec9-066a-970d49579041@infradead.org
Fixes: ad2a722f196d ("libfs: Open code simple_commit_write into only user")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Boaz Harrosh <boazh@netapp.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix kernel-doc warning in fs/direct-io.c:
fs/direct-io.c:258: warning: Excess function parameter 'offset' description in 'dio_complete'
Also, don't mark this function as having kernel-doc notation since it is
not exported.
Link: http://lkml.kernel.org/r/97908511-4328-4a56-17fe-f43a1d7aa470@infradead.org
Fixes: 6d544bb4d901 ("dio: centralize completion in dio_complete()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Zach Brown <zab@zabbo.net>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Florian and Dave reported [1] a NULL pointer dereference in
__reset_isolation_pfn(). While the exact cause is unclear, staring at
the code revealed two bugs, which might be related.
One bug is that if zone starts in the middle of pageblock, block_page
might correspond to different pfn than block_pfn, and then the
pfn_valid_within() checks will check different pfn's than those accessed
via struct page. This might result in acessing an unitialized page in
CONFIG_HOLES_IN_ZONE configs.
The other bug is that end_page refers to the first page of next
pageblock and not last page of current pageblock. The online and valid
check is then wrong and with sections, the while (page < end_page) loop
might wander off actual struct page arrays.
[1] https://lore.kernel.org/linux-xfs/87o8z1fvqu.fsf@mid.deneb.enyo.de/
Link: http://lkml.kernel.org/r/20191008152915.24704-1-vbabka@suse.cz
Fixes: 6b0868c820ff ("mm/compaction.c: correct zone boundary handling when resetting pageblock skip hints")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Florian Weimer <fw@deneb.enyo.de>
Reported-by: Dave Chinner <david@fromorbit.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit b39d0ee2632d ("mm, page_alloc: avoid expensive reclaim when
compaction may not succeed") has chnaged the allocator to bail out from
the allocator early to prevent from a potentially excessive memory
reclaim. __GFP_RETRY_MAYFAIL is designed to retry the allocation,
reclaim and compaction loop as long as there is a reasonable chance to
make forward progress. Neither COMPACT_SKIPPED nor COMPACT_DEFERRED at
the INIT_COMPACT_PRIORITY compaction attempt gives this feedback.
The most obvious affected subsystem is hugetlbfs which allocates huge
pages based on an admin request (or via admin configured overcommit). I
have done a simple test which tries to allocate half of the memory for
hugetlb pages while the memory is full of a clean page cache. This is
not an unusual situation because we try to cache as much of the memory
as possible and sysctl/sysfs interface to allocate huge pages is there
for flexibility to allocate hugetlb pages at any time.
System has 1GB of RAM and we are requesting 515MB worth of hugetlb pages
after the memory is prefilled by a clean page cache:
root@test1:~# cat hugetlb_test.sh
set -x
echo 0 > /proc/sys/vm/nr_hugepages
echo 3 > /proc/sys/vm/drop_caches
echo 1 > /proc/sys/vm/compact_memory
dd if=/mnt/data/file-1G of=/dev/null bs=$((4<<10))
TS=$(date +%s)
echo 256 > /proc/sys/vm/nr_hugepages
cat /proc/sys/vm/nr_hugepages
The results for 2 consecutive runs on clean 5.3
root@test1:~# sh hugetlb_test.sh
+ echo 0
+ echo 3
+ echo 1
+ dd if=/mnt/data/file-1G of=/dev/null bs=4096
262144+0 records in
262144+0 records out
1073741824 bytes (1.1 GB) copied, 21.0694 s, 51.0 MB/s
+ date +%s
+ TS=1569905284
+ echo 256
+ cat /proc/sys/vm/nr_hugepages
256
root@test1:~# sh hugetlb_test.sh
+ echo 0
+ echo 3
+ echo 1
+ dd if=/mnt/data/file-1G of=/dev/null bs=4096
262144+0 records in
262144+0 records out
1073741824 bytes (1.1 GB) copied, 21.7548 s, 49.4 MB/s
+ date +%s
+ TS=1569905311
+ echo 256
+ cat /proc/sys/vm/nr_hugepages
256
Now with b39d0ee2632d applied
root@test1:~# sh hugetlb_test.sh
+ echo 0
+ echo 3
+ echo 1
+ dd if=/mnt/data/file-1G of=/dev/null bs=4096
262144+0 records in
262144+0 records out
1073741824 bytes (1.1 GB) copied, 20.1815 s, 53.2 MB/s
+ date +%s
+ TS=1569905516
+ echo 256
+ cat /proc/sys/vm/nr_hugepages
11
root@test1:~# sh hugetlb_test.sh
+ echo 0
+ echo 3
+ echo 1
+ dd if=/mnt/data/file-1G of=/dev/null bs=4096
262144+0 records in
262144+0 records out
1073741824 bytes (1.1 GB) copied, 21.9485 s, 48.9 MB/s
+ date +%s
+ TS=1569905541
+ echo 256
+ cat /proc/sys/vm/nr_hugepages
12
The success rate went down by factor of 20!
Although hugetlb allocation requests might fail and it is reasonable to
expect them to under extremely fragmented memory or when the memory is
under a heavy pressure but the above situation is not that case.
Fix the regression by reverting back to the previous behavior for
__GFP_RETRY_MAYFAIL requests and disable the beail out heuristic for
those requests.
Mike said:
: hugetlbfs allocations are commonly done via sysctl/sysfs shortly after
: boot where this may not be as much of an issue. However, I am aware of at
: least three use cases where allocations are made after the system has been
: up and running for quite some time:
:
: - DB reconfiguration. If sysctl/sysfs fails to get required number of
: huge pages, system is rebooted to perform allocation after boot.
:
: - VM provisioning. If unable get required number of huge pages, fall
: back to base pages.
:
: - An application that does not preallocate pool, but rather allocates
: pages at fault time for optimal NUMA locality.
:
: In all cases, I would expect b39d0ee2632d to cause regressions and
: noticable behavior changes.
:
: My quick/limited testing in
: https://lkml.kernel.org/r/3468b605-a3a9-6978-9699-57c52a90bd7e@oracle.com
: was insufficient. It was also mentioned that if something like
: b39d0ee2632d went forward, I would like exemptions for __GFP_RETRY_MAYFAIL
: requests as in this patch.
[mhocko@suse.com: reworded changelog]
Link: http://lkml.kernel.org/r/20191007075548.12456-1-mhocko@kernel.org
Fixes: b39d0ee2632d ("mm, page_alloc: avoid expensive reclaim when compaction may not succeed")
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Make sure allocations from kmem_cache_alloc_bulk() and
kmem_cache_free_bulk() are properly initialized.
Link: http://lkml.kernel.org/r/20191007091605.30530-2-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Thibaut Sautereau <thibaut@sautereau.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
slab_alloc_node() already zeroed out the freelist pointer if
init_on_free was on. Thibaut Sautereau noticed that the same needs to
be done for kmem_cache_alloc_bulk(), which performs the allocations
separately.
kmem_cache_alloc_bulk() is currently used in two places in the kernel,
so this change is unlikely to have a major performance impact.
SLAB doesn't require a similar change, as auto-initialization makes the
allocator store the freelist pointers off-slab.
Link: http://lkml.kernel.org/r/20191007091605.30530-1-glider@google.com
Fixes: 6471384af2a6 ("mm: security: introduce init_on_alloc=1 and init_on_free=1 boot options")
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: Thibaut Sautereau <thibaut@sautereau.fr>
Reported-by: Kees Cook <keescook@chromium.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Laura Abbott <labbott@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Kmemleak is falsely reporting a leak of the slab allocation in
sctp_stream_init_ext():
BUG: memory leak
unreferenced object 0xffff8881114f5d80 (size 96):
comm "syz-executor934", pid 7160, jiffies 4294993058 (age 31.950s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000ce7a1326>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline]
[<00000000ce7a1326>] slab_post_alloc_hook mm/slab.h:439 [inline]
[<00000000ce7a1326>] slab_alloc mm/slab.c:3326 [inline]
[<00000000ce7a1326>] kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553
[<000000007abb7ac9>] kmalloc include/linux/slab.h:547 [inline]
[<000000007abb7ac9>] kzalloc include/linux/slab.h:742 [inline]
[<000000007abb7ac9>] sctp_stream_init_ext+0x2b/0xa0 net/sctp/stream.c:157
[<0000000048ecb9c1>] sctp_sendmsg_to_asoc+0x946/0xa00 net/sctp/socket.c:1882
[<000000004483ca2b>] sctp_sendmsg+0x2a8/0x990 net/sctp/socket.c:2102
[...]
But it's freed later. Kmemleak misses the allocation because its
pointer is stored in the generic radix tree sctp_stream::out, and the
generic radix tree uses raw pages which aren't tracked by kmemleak.
Fix this by adding the kmemleak hooks to the generic radix tree code.
Link: http://lkml.kernel.org/r/20191004065039.727564-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reported-by: <syzbot+7f3b6b106be8dcdcdeec@syzkaller.appspotmail.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
A long time ago we fixed a similar deadlock in show_slab_objects() [1].
However, it is apparently due to the commits like 01fb58bcba63 ("slab:
remove synchronous synchronize_sched() from memcg cache deactivation
path") and 03afc0e25f7f ("slab: get_online_mems for
kmem_cache_{create,destroy,shrink}"), this kind of deadlock is back by
just reading files in /sys/kernel/slab which will generate a lockdep
splat below.
Since the "mem_hotplug_lock" here is only to obtain a stable online node
mask while racing with NUMA node hotplug, in the worst case, the results
may me miscalculated while doing NUMA node hotplug, but they shall be
corrected by later reads of the same files.
WARNING: possible circular locking dependency detected
------------------------------------------------------
cat/5224 is trying to acquire lock:
ffff900012ac3120 (mem_hotplug_lock.rw_sem){++++}, at:
show_slab_objects+0x94/0x3a8
but task is already holding lock:
b8ff009693eee398 (kn->count#45){++++}, at: kernfs_seq_start+0x44/0xf0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (kn->count#45){++++}:
lock_acquire+0x31c/0x360
__kernfs_remove+0x290/0x490
kernfs_remove+0x30/0x44
sysfs_remove_dir+0x70/0x88
kobject_del+0x50/0xb0
sysfs_slab_unlink+0x2c/0x38
shutdown_cache+0xa0/0xf0
kmemcg_cache_shutdown_fn+0x1c/0x34
kmemcg_workfn+0x44/0x64
process_one_work+0x4f4/0x950
worker_thread+0x390/0x4bc
kthread+0x1cc/0x1e8
ret_from_fork+0x10/0x18
-> #1 (slab_mutex){+.+.}:
lock_acquire+0x31c/0x360
__mutex_lock_common+0x16c/0xf78
mutex_lock_nested+0x40/0x50
memcg_create_kmem_cache+0x38/0x16c
memcg_kmem_cache_create_func+0x3c/0x70
process_one_work+0x4f4/0x950
worker_thread+0x390/0x4bc
kthread+0x1cc/0x1e8
ret_from_fork+0x10/0x18
-> #0 (mem_hotplug_lock.rw_sem){++++}:
validate_chain+0xd10/0x2bcc
__lock_acquire+0x7f4/0xb8c
lock_acquire+0x31c/0x360
get_online_mems+0x54/0x150
show_slab_objects+0x94/0x3a8
total_objects_show+0x28/0x34
slab_attr_show+0x38/0x54
sysfs_kf_seq_show+0x198/0x2d4
kernfs_seq_show+0xa4/0xcc
seq_read+0x30c/0x8a8
kernfs_fop_read+0xa8/0x314
__vfs_read+0x88/0x20c
vfs_read+0xd8/0x10c
ksys_read+0xb0/0x120
__arm64_sys_read+0x54/0x88
el0_svc_handler+0x170/0x240
el0_svc+0x8/0xc
other info that might help us debug this:
Chain exists of:
mem_hotplug_lock.rw_sem --> slab_mutex --> kn->count#45
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(kn->count#45);
lock(slab_mutex);
lock(kn->count#45);
lock(mem_hotplug_lock.rw_sem);
*** DEADLOCK ***
3 locks held by cat/5224:
#0: 9eff00095b14b2a0 (&p->lock){+.+.}, at: seq_read+0x4c/0x8a8
#1: 0eff008997041480 (&of->mutex){+.+.}, at: kernfs_seq_start+0x34/0xf0
#2: b8ff009693eee398 (kn->count#45){++++}, at:
kernfs_seq_start+0x44/0xf0
stack backtrace:
Call trace:
dump_backtrace+0x0/0x248
show_stack+0x20/0x2c
dump_stack+0xd0/0x140
print_circular_bug+0x368/0x380
check_noncircular+0x248/0x250
validate_chain+0xd10/0x2bcc
__lock_acquire+0x7f4/0xb8c
lock_acquire+0x31c/0x360
get_online_mems+0x54/0x150
show_slab_objects+0x94/0x3a8
total_objects_show+0x28/0x34
slab_attr_show+0x38/0x54
sysfs_kf_seq_show+0x198/0x2d4
kernfs_seq_show+0xa4/0xcc
seq_read+0x30c/0x8a8
kernfs_fop_read+0xa8/0x314
__vfs_read+0x88/0x20c
vfs_read+0xd8/0x10c
ksys_read+0xb0/0x120
__arm64_sys_read+0x54/0x88
el0_svc_handler+0x170/0x240
el0_svc+0x8/0xc
I think it is important to mention that this doesn't expose the
show_slab_objects to use-after-free. There is only a single path that
might really race here and that is the slab hotplug notifier callback
__kmem_cache_shrink (via slab_mem_going_offline_callback) but that path
doesn't really destroy kmem_cache_node data structures.
[1] http://lkml.iu.edu/hypermail/linux/kernel/1101.0/02850.html
[akpm@linux-foundation.org: add comment explaining why we don't need mem_hotplug_lock]
Link: http://lkml.kernel.org/r/1570192309-10132-1-git-send-email-cai@lca.pw
Fixes: 01fb58bcba63 ("slab: remove synchronous synchronize_sched() from memcg cache deactivation path")
Fixes: 03afc0e25f7f ("slab: get_online_mems for kmem_cache_{create,destroy,shrink}")
Signed-off-by: Qian Cai <cai@lca.pw>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 37389167a281 ("mm, page_owner: keep owner info when freeing the
page") has introduced a flag PAGE_EXT_OWNER_ACTIVE to indicate that page
is tracked as being allocated. Kirril suggested naming it
PAGE_EXT_OWNER_ALLOCATED to make it more clear, as "active is somewhat
loaded term for a page".
Link: http://lkml.kernel.org/r/20190930122916.14969-4-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Suggested-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Walter Wu <walter-zh.wu@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 8974558f49a6 ("mm, page_owner, debug_pagealloc: save and dump
freeing stack trace") enhanced page_owner to also store freeing stack
trace, when debug_pagealloc is also enabled. KASAN would also like to
do this [1] to improve error reports to debug e.g. UAF issues.
Kirill has suggested that the freeing stack trace saving should be also
possible to be enabled separately from KASAN or debug_pagealloc, i.e.
with an extra boot option. Qian argued that we have enough options
already, and avoiding the extra overhead is not worth the complications
in the case of a debugging option. Kirill noted that the extra stack
handle in struct page_owner requires 0.1% of memory.
This patch therefore enables free stack saving whenever page_owner is
enabled, regardless of whether debug_pagealloc or KASAN is also enabled.
KASAN kernels booted with page_owner=on will thus benefit from the
improved error reports.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=203967
[vbabka@suse.cz: v3]
Link: http://lkml.kernel.org/r/20191007091808.7096-3-vbabka@suse.cz
Link: http://lkml.kernel.org/r/20190930122916.14969-3-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Qian Cai <cai@lca.pw>
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Suggested-by: Walter Wu <walter-zh.wu@mediatek.com>
Suggested-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Suggested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Suggested-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series "followups to debug_pagealloc improvements through
page_owner", v3.
These are followups to [1] which made it to Linus meanwhile. Patches 1
and 3 are based on Kirill's review, patch 2 on KASAN request [2]. It
would be nice if all of this made it to 5.4 with [1] already there (or
at least Patch 1).
This patch (of 3):
As noted by Kirill, commit 7e2f2a0cd17c ("mm, page_owner: record page
owner for each subpage") has introduced an off-by-one error in
__set_page_owner_handle() when looking up page_ext for subpages. As a
result, the head page page_owner info is set twice, while for the last
tail page, it's not set at all.
Fix this and also make the code more efficient by advancing the page_ext
pointer we already have, instead of calling lookup_page_ext() for each
subpage. Since the full size of struct page_ext is not known at compile
time, we can't use a simple page_ext++ statement, so introduce a
page_ext_next() inline function for that.
Link: http://lkml.kernel.org/r/20190930122916.14969-2-vbabka@suse.cz
Fixes: 7e2f2a0cd17c ("mm, page_owner: record page owner for each subpage")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Kirill A. Shutemov <kirill@shutemov.name>
Reported-by: Miles Chen <miles.chen@mediatek.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Walter Wu <walter-zh.wu@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
__get_user_[no]check uses temporary buffer of type long to store result
of __get_user_size and do sign extension on it when necessary. This
doesn't work correctly for 64-bit data. Fix it by moving temporary
buffer/sign extension logic to __get_user_asm.
Don't do assignment of __get_user_bad result to (x) as it may not always
be integer-compatible now and issue warning even when it's going to be
optimized. Instead do (x) = 0; and call __get_user_bad separately.
Zero initialize __x in __get_user_asm and use '+' constraint for its
assembly argument, so that its value is preserved in error cases. This
may add at most 1 cycle to the fast path, but saves an instruction and
two padding bytes in the fixup section for each use of this macro and
works for both misaligned store and store exception.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
Numeric assembly arguments are hard to understand and assembly code that
uses them is hard to modify. Use named arguments in __check_align_*,
__get_user_asm and __put_user_asm. Modify macro parameter names so that
they don't affect argument names. Use '+' constraint for the [err]
argument instead of having it as both input and output.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
This breaks booting from sata_sil24 with the recent DMA change.
According to James Bottomley this was in to improve performance by
kicking the device into 32 bit descriptors, which are usually more
efficient, especially with older dual descriptor format cards like we
have on parisc systems.
Remove it for now to make DMA working again.
Fixes: dcc02c19cc06 ("sata_sil24: use dma_set_mask_and_coherent")
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Sven noticed that calling ioremap() and iounmap() multiple times leads
to a vmap memory leak:
vmap allocation for size 4198400 failed:
use vmalloc=<size> to increase size
It seems we missed calling vunmap() in iounmap().
Signed-off-by: Helge Deller <deller@gmx.de>
Noticed-by: Sven Schnelle <svens@stackframe.org>
Cc: <stable@vger.kernel.org> # v3.16+
|
|
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Before reading the Extended Size field, we should ensure it fits in
the DMI record. There is already a record length check but it does
not cover that field.
It would take a seriously corrupted DMI table to hit that bug, so no
need to worry, but we should still fix it.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 6deae96b42eb ("firmware, DMI: Add function to look up a handle and return DIMM size")
Cc: Tony Luck <tony.luck@intel.com>
Cc: Borislav Petkov <bp@suse.de>
|
|
Three feature registers were declared but never actually read from the
GPU. Add THREAD_MAX_THREADS, THREAD_MAX_WORKGROUP_SIZE and
THREAD_MAX_BARRIER_SIZE so that the complete set are available.
Fixes: 4bced8bea094 ("drm/panfrost: Export all GPU feature registers")
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191014151515.13839-1-steven.price@arm.com
|
