summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-02-12selftests: net: ip_local_port_range: define IPPROTO_MPTCPMaxim Galaganov
Older glibc's netinet/in.h may leave IPPROTO_MPTCP undefined when building ip_local_port_range.c, that leads to "error: use of undeclared identifier 'IPPROTO_MPTCP'". Define IPPROTO_MPTCP in such cases, just like in other MPTCP selftests. Fixes: 122db5e3634b ("selftests/net: add MPTCP coverage for IP_LOCAL_PORT_RANGE") Reported-by: Linux Kernel Functional Testing <lkft@linaro.org> Closes: https://lore.kernel.org/netdev/CA+G9fYvGO5q4o_Td_kyQgYieXWKw6ktMa-Q0sBu6S-0y3w2aEQ@mail.gmail.com/ Signed-off-by: Maxim Galaganov <max@internet.ru> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Link: https://lore.kernel.org/r/20240209132512.254520-1-max@internet.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-12i40e: Do not allow untrusted VF to remove administratively set MACIvan Vecera
Currently when PF administratively sets VF's MAC address and the VF is put down (VF tries to delete all MACs) then the MAC is removed from MAC filters and primary VF MAC is zeroed. Do not allow untrusted VF to remove primary MAC when it was set administratively by PF. Reproducer: 1) Create VF 2) Set VF interface up 3) Administratively set the VF's MAC 4) Put VF interface down [root@host ~]# echo 1 > /sys/class/net/enp2s0f0/device/sriov_numvfs [root@host ~]# ip link set enp2s0f0v0 up [root@host ~]# ip link set enp2s0f0 vf 0 mac fe:6c:b5:da:c7:7d [root@host ~]# ip link show enp2s0f0 23: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether 3c:ec:ef:b7:dd:04 brd ff:ff:ff:ff:ff:ff vf 0 link/ether fe:6c:b5:da:c7:7d brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off [root@host ~]# ip link set enp2s0f0v0 down [root@host ~]# ip link show enp2s0f0 23: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether 3c:ec:ef:b7:dd:04 brd ff:ff:ff:ff:ff:ff vf 0 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off Fixes: 700bbf6c1f9e ("i40e: allow VF to remove any MAC filter") Fixes: ceb29474bbbc ("i40e: Add support for VF to specify its primary MAC address") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240208180335.1844996-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-12x86/mm/ident_map: Use gbpages only where full GB page should be mapped.Steve Wahl
When ident_pud_init() uses only gbpages to create identity maps, large ranges of addresses not actually requested can be included in the resulting table; a 4K request will map a full GB. On UV systems, this ends up including regions that will cause hardware to halt the system if accessed (these are marked "reserved" by BIOS). Even processor speculation into these regions is enough to trigger the system halt. Only use gbpages when map creation requests include the full GB page of space. Fall back to using smaller 2M pages when only portions of a GB page are included in the request. No attempt is made to coalesce mapping requests. If a request requires a map entry at the 2M (pmd) level, subsequent mapping requests within the same 1G region will also be at the pmd level, even if adjacent or overlapping such requests could have been combined to map a full gbpage. Existing usage starts with larger regions and then adds smaller regions, so this should not have any great consequence. [ dhansen: fix up comment formatting, simplifty changelog ] Signed-off-by: Steve Wahl <steve.wahl@hpe.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20240126164841.170866-1-steve.wahl%40hpe.com
2024-02-12Merge tag 'docs-6.8-fixes2' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation fix from Jonathan Corbet: "A single fix to the kernel_feat extension for a bug that will crash the docs build in some situations" * tag 'docs-6.8-fixes2' of git://git.lwn.net/linux: docs: kernel_feat.py: fix build error for missing files
2024-02-12mm/memory: Use exception ip to search exception tablesJiaxun Yang
On architectures with delay slot, instruction_pointer() may differ from where exception was triggered. Use exception_ip we just introduced to search exception tables to get rid of the problem. Fixes: 4bce37a68ff8 ("mips/mm: Convert to using lock_mm_and_find_vma()") Reported-by: Xi Ruoyao <xry111@xry111.site> Link: https://lore.kernel.org/r/75e9fd7b08562ad9b456a5bdaacb7cc220311cc9.camel@xry111.site/ Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2024-02-12MIPS: Clear Cause.BD in instruction_pointer_setJiaxun Yang
Clear Cause.BD after we use instruction_pointer_set to override EPC. This can prevent exception_epc check against instruction code at new return address. It won't be considered as "in delay slot" after epc being overridden anyway. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2024-02-12ptrace: Introduce exception_ip arch hookJiaxun Yang
On architectures with delay slot, architecture level instruction pointer (or program counter) in pt_regs may differ from where exception was triggered. Introduce exception_ip hook to invoke architecture code and determine actual instruction pointer to the exception. Link: https://lore.kernel.org/lkml/00d1b813-c55f-4365-8d81-d70258e10b16@app.fastmail.com/ Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2024-02-12MIPS: Add 'memory' clobber to csum_ipv6_magic() inline assemblerGuenter Roeck
After 'lib: checksum: Use aligned accesses for ip_fast_csum and csum_ipv6_magic tests' was applied, the test_csum_ipv6_magic unit test started failing for all mips platforms, both little and bit endian. Oddly enough, adding debug code into test_csum_ipv6_magic() made the problem disappear. The gcc manual says: "The "memory" clobber tells the compiler that the assembly code performs memory reads or writes to items other than those listed in the input and output operands (for example, accessing the memory pointed to by one of the input parameters) " This is definitely the case for csum_ipv6_magic(). Indeed, adding the 'memory' clobber fixes the problem. Cc: Charlie Jenkins <charlie@rivosinc.com> Cc: Palmer Dabbelt <palmer@rivosinc.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Charlie Jenkins <charlie@rivosinc.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2024-02-12x86/xen: Add some null pointer checking to smp.cKunwu Chan
kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Ensure the allocation was successful by checking the pointer validity. Signed-off-by: Kunwu Chan <chentao@kylinos.cn> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202401161119.iof6BQsf-lkp@intel.com/ Suggested-by: Markus Elfring <Markus.Elfring@web.de> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20240119094948.275390-1-chentao@kylinos.cn Signed-off-by: Juergen Gross <jgross@suse.com>
2024-02-12smb: client: handle path separator of created SMB symlinksPaulo Alcantara
Convert path separator to CIFS_DIR_SEP(cifs_sb) from symlink target before sending it over the wire otherwise the created SMB symlink may become innaccesible from server side. Fixes: 514d793e27a3 ("smb: client: allow creating symlinks via reparse points") Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2024-02-12smb: client: set correct id, uid and cruid for multiuser automountsPaulo Alcantara
When uid, gid and cruid are not specified, we need to dynamically set them into the filesystem context used for automounting otherwise they'll end up reusing the values from the parent mount. Fixes: 9fd29a5bae6e ("cifs: use fs_context for automounts") Reported-by: Shane Nehring <snehring@iastate.edu> Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2259257 Cc: stable@vger.kernel.org # 6.2+ Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2024-02-12xen/xenbus: document will_handle argument for xenbus_watch_path()SeongJae Park
Commit 2e85d32b1c86 ("xen/xenbus: Add 'will_handle' callback support in xenbus_watch_path()") added will_handle argument to xenbus_watch_path() and its wrapper, xenbus_watch_pathfmt(), but didn't document it on the kerneldoc comments of the function. This is causing warnings that reported by kernel test robot. Add the documentation to fix it. Fixes: 2e85d32b1c86 ("xen/xenbus: Add 'will_handle' callback support in xenbus_watch_path()") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202401121154.FI8jDGun-lkp@intel.com/ Signed-off-by: SeongJae Park <sj@kernel.org> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/20240112185903.83737-1-sj@kernel.org Signed-off-by: Juergen Gross <jgross@suse.com>
2024-02-12i2c: qcom-geni: Correct I2C TRE sequenceViken Dadhaniya
For i2c read operation in GSI mode, we are getting timeout due to malformed TRE basically incorrect TRE sequence in gpi(drivers/dma/qcom/gpi.c) driver. I2C driver has geni_i2c_gpi(I2C_WRITE) function which generates GO TRE and geni_i2c_gpi(I2C_READ)generates DMA TRE. Hence to generate GO TRE before DMA TRE, we should move geni_i2c_gpi(I2C_WRITE) before geni_i2c_gpi(I2C_READ) inside the I2C GSI mode transfer function i.e. geni_i2c_gpi_xfer(). TRE stands for Transfer Ring Element - which is basically an element with size of 4 words. It contains all information like slave address, clk divider, dma address value data size etc). Mainly we have 3 TREs(Config, GO and DMA tre). - CONFIG TRE : consists of internal register configuration which is required before start of the transfer. - DMA TRE : contains DDR/Memory address, called as DMA descriptor. - GO TRE : contains Transfer directions, slave ID, Delay flags, Length of the transfer. I2c driver calls GPI driver API to config each TRE depending on the protocol. For read operation tre sequence will be as below which is not aligned to hardware programming guide. - CONFIG tre - DMA tre - GO tre As per Qualcomm's internal Hardware Programming Guide, we should configure TREs in below sequence for any RX only transfer. - CONFIG tre - GO tre - DMA tre Fixes: d8703554f4de ("i2c: qcom-geni: Add support for GPI DMA") Reviewed-by: Andi Shyti <andi.shyti@kernel.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # qrb5165-rb5 Co-developed-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com> Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com> Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
2024-02-12ASoC: amd: yc: Fix non-functional mic on Lenovo 82UUAttila Tőkés
Like many other models, the Lenovo 82UU (Yoga Slim 7 Pro 14ARH7) needs a quirk entry for the internal microphone to function. Signed-off-by: Attila Tőkés <attitokes@gmail.com> Link: https://msgid.link/r/20240210193638.144028-1-attitokes@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-12Merge tag 'vfs-6.8-rc5.fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull vfs fixes from Christian Brauner: - Fix performance regression introduced by moving the security permission hook out of do_clone_file_range() and into its caller vfs_clone_file_range(). This causes the security hook to be called in situation were it wasn't called before as the fast permission checks were left in do_clone_file_range(). Fix this by merging the two implementations back together and restoring the old ordering: fast permission checks first, expensive ones later. - Tweak mount_setattr() permission checking so that mount properties on the real rootfs can be changed. When we added mount_setattr() we added additional checks compared to legacy mount(2). If the mount had a parent then verify that the caller and the mount namespace the mount is attached to match and if not make sure that it's an anonymous mount. But the real rootfs falls into neither category. It is neither an anoymous mount because it is obviously attached to the initial mount namespace but it also obviously doesn't have a parent mount. So that means legacy mount(2) allows changing mount properties on the real rootfs but mount_setattr(2) blocks this. This causes regressions (See the commit for details). Fix this by relaxing the check. If the mount has a parent or if it isn't a detached mount, verify that the mount namespaces of the caller and the mount are the same. Technically, we could probably write this even simpler and check that the mount namespaces match if it isn't a detached mount. But the slightly longer check makes it clearer what conditions one needs to think about. * tag 'vfs-6.8-rc5.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: fs: relax mount_setattr() permission checks remap_range: merge do_clone_file_range() into vfs_clone_file_range()
2024-02-12nouveau/svm: fix kvcalloc() argument orderArnd Bergmann
The conversion to kvcalloc() mixed up the object size and count arguments, causing a warning: drivers/gpu/drm/nouveau/nouveau_svm.c: In function 'nouveau_svm_fault_buffer_ctor': drivers/gpu/drm/nouveau/nouveau_svm.c:1010:40: error: 'kvcalloc' sizes specified with 'sizeof' in the earlier argument and not in the later argument [-Werror=calloc-transposed-args] 1010 | buffer->fault = kvcalloc(sizeof(*buffer->fault), buffer->entries, GFP_KERNEL); | ^ drivers/gpu/drm/nouveau/nouveau_svm.c:1010:40: note: earlier argument should specify number of elements, later size of each element The behavior is still correct aside from the warning, but fixing it avoids the warnings and can help the compiler track the individual objects better. Fixes: 71e4bbca070e ("nouveau/svm: Use kvcalloc() instead of kvzalloc()") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240212112230.1117284-1-arnd@kernel.org
2024-02-12regmap: kunit: Ensure that changed bytes are actually differentMark Brown
During the cache sync test we verify that values we expect to have been written only to the cache do not appear in the hardware. This works most of the time but since we randomly generate both the original and new values there is a low probability that these values may actually be the same. Wrap get_random_bytes() to ensure that the values are different, there are other tests which should have similar verification that we actually changed something. While we're at it refactor the test to use three changed values rather than attempting to use one of them twice, that just complicates checking that our new values are actually new. We use random generation to try to avoid data dependencies in the tests. Reported-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://msgid.link/r/20240211-regmap-kunit-random-change-v3-1-e387a9ea4468@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-12spi: intel-pci: Add support for Lunar Lake-M SPI serial flashMika Westerberg
Add Intel Lunar Lake-M PCI ID to the driver list of supported devices. This is the same controller found in previous generations. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://msgid.link/r/20240212082027.2462849-1-mika.westerberg@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-12spi: omap2-mcspi: Revert FIFO support without DMAVaishnav Achath
MCSPI controller have few limitations regarding the transaction size when the FIFO buffer is enabled and the WCNT feature is used to find the end of word, in this case if WCNT is not a multiple of the FIFO Almost Empty Level (AEL), then the FIFO empty event is not generated correctly. In addition to this limitation, few other unknown sequence of events that causes the FIFO empty status to not reflect the exact status were found when FIFO is being used without DMA enabled during extended testing in AM65x platform. Till the exact root cause is found and fixed, revert the FIFO support without DMA. See J721E Technical Reference Manual (SPRUI1C), section 12.1.5 for further details: http://www.ti.com/lit/pdf/spruil1 This reverts commit 75223bbea840e ("spi: omap2-mcspi: Add FIFO support without DMA") Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Link: https://msgid.link/r/20240212120049.438495-1-vaishnav.a@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-12ASoC: rt5645: Add DMI quirk for inverted jack-detect on MeeGoPad T8Hans de Goede
The MeeGoPad T8 uses the standard rt5645 jd_mode=3 setting for jack-detect, but the used jack connector outputs an inverted jack-detect signal. Add a DMI quirk for this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://msgid.link/r/20240211212736.179605-2-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-12ASoC: rt5645: Make LattePanda board DMI match more preciseHans de Goede
The DMI strings used for the LattePanda board DMI quirks are very generic. Using the dmidecode database from https://linux-hardware.org/ shows that the chosen DMI strings also match the following 2 laptops which also have a rt5645 codec: Insignia NS-P11W7100 https://linux-hardware.org/?computer=E092FFF8BA04 Insignia NS-P10W8100 https://linux-hardware.org/?computer=AFB6C0BF7934 All 4 hw revisions of the LattePanda board have "S70CR" in their BIOS version DMI strings: DF-BI-7-S70CR100-* DF-BI-7-S70CR110-* DF-BI-7-S70CR200-* LP-BS-7-S70CR700-* See e.g. https://linux-hardware.org/?computer=D98250A817C0 Add a partial (non exact) DMI match on this string to make the LattePanda board DMI match more precise to avoid false-positive matches. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://msgid.link/r/20240211212736.179605-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-12net: sysfs: Fix /sys/class/net/<iface> path for statisticsBreno Leitao
The Documentation/ABI/testing/sysfs-class-net-statistics documentation is pointing to the wrong path for the interface. Documentation is pointing to /sys/class/<iface>, instead of /sys/class/net/<iface>. Fix it by adding the `net/` directory before the interface. Fixes: 6044f9700645 ("net: sysfs: document /sys/class/net/statistics/*") Signed-off-by: Breno Leitao <leitao@debian.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-12drm/nouveau: omit to create schedulers using the legacy uAPIDanilo Krummrich
Omit to create scheduler instances when using the legacy uAPI. When using the legacy NOUVEAU_GEM_PUSHBUF ioctl no scheduler instance is required, hence omit creating scheduler instances in nouveau_abi16_ioctl_channel_alloc(). Tested-by: Timur Tabi <ttabi@nvidia.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240202000606.3526-2-dakr@redhat.com
2024-02-12drm/nouveau: don't fini scheduler if not initializedDanilo Krummrich
nouveau_abi16_ioctl_channel_alloc() and nouveau_cli_init() simply call their corresponding *_fini() counterpart. This can lead to nouveau_sched_fini() being called without struct nouveau_sched ever being initialized in the first place. Instead of embedding struct nouveau_sched into struct nouveau_cli and struct nouveau_chan_abi16, allocate struct nouveau_sched separately, such that we can check for the corresponding pointer to be NULL in the particular *_fini() functions. It makes sense to allocate struct nouveau_sched separately anyway, since in a subsequent commit we can also avoid to allocate a struct nouveau_sched in nouveau_abi16_ioctl_channel_alloc() at all, if the VM_BIND uAPI has been disabled due to the legacy uAPI being used. Fixes: 5f03a507b29e ("drm/nouveau: implement 1:1 scheduler - entity relationship") Reported-by: Timur Tabi <ttabi@nvidia.com> Tested-by: Timur Tabi <ttabi@nvidia.com> Closes: https://lore.kernel.org/nouveau/20240131213917.1545604-1-ttabi@nvidia.com/ Reviewed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240202000606.3526-1-dakr@redhat.com
2024-02-12Merge branch 'mptcp-misc-fixes'David S. Miller
Matthieu Baerts says: ==================== mptcp: locking cleanup & misc. fixes Patches 1-4 are fixes for issues found by Paolo while working on adding TCP_NOTSENT_LOWAT support. The latter will need to track more states under the msk data lock. Since the locking msk locking schema is already quite complex, do a long awaited clean-up step by moving several confusing lockless initialization under the relevant locks. Note that it is unlikely a real race could happen even prior to such patches as the MPTCP-level state machine implicitly ensures proper serialization of the write accesses, even lacking explicit lock. But still, simplification is welcome and this will help for the maintenance. This can be backported up to v5.6. Patch 5 is a fix for the userspace PM, not to add new local address entries if the address is already in the list. This behaviour can be seen since v5.19. Patch 6 fixes an issue when Fastopen is used. The issue can happen since v6.2. A previous fix has already been applied, but not taking care of all cases according to syzbot. Patch 7 updates Geliang's email address in the MAINTAINERS file. ==================== Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-12MAINTAINERS: update Geliang's email addressGeliang Tang
Update my email-address in MAINTAINERS and .mailmap entries to my kernel.org account. Suggested-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Geliang Tang <geliang@kernel.org> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-12mptcp: really cope with fastopen racePaolo Abeni
Fastopen and PM-trigger subflow shutdown can race, as reported by syzkaller. In my first attempt to close such race, I missed the fact that the subflow status can change again before the subflow_state_change callback is invoked. Address the issue additionally copying with all the states directly reachable from TCP_FIN_WAIT1. Fixes: 1e777f39b4d7 ("mptcp: add MSG_FASTOPEN sendmsg flag support") Fixes: 4fd19a307016 ("mptcp: fix inconsistent state on fastopen race") Cc: stable@vger.kernel.org Reported-by: syzbot+c53d4d3ddb327e80bc51@syzkaller.appspotmail.com Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/458 Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-12mptcp: check addrs list in userspace_pm_get_local_idGeliang Tang
Before adding a new entry in mptcp_userspace_pm_get_local_id(), it's better to check whether this address is already in userspace pm local address list. If it's in the list, no need to add a new entry, just return it's address ID and use this address. Fixes: 8b20137012d9 ("mptcp: read attributes of addr entries managed by userspace PMs") Cc: stable@vger.kernel.org Signed-off-by: Geliang Tang <geliang.tang@linux.dev> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-12mptcp: corner case locking for rx path fields initializationPaolo Abeni
Most MPTCP-level related fields are under the mptcp data lock protection, but are written one-off without such lock at MPC complete time, both for the client and the server Leverage the mptcp_propagate_state() infrastructure to move such initialization under the proper lock client-wise. The server side critical init steps are done by mptcp_subflow_fully_established(): ensure the caller properly held the relevant lock, and avoid acquiring the same lock in the nested scopes. There are no real potential races, as write access to such fields is implicitly serialized by the MPTCP state machine; the primary goal is consistency. Fixes: d22f4988ffec ("mptcp: process MP_CAPABLE data option") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-12mptcp: fix more tx path fields initializationPaolo Abeni
The 'msk->write_seq' and 'msk->snd_nxt' are always updated under the msk socket lock, except at MPC handshake completiont time. Builds-up on the previous commit to move such init under the relevant lock. There are no known problems caused by the potential race, the primary goal is consistency. Fixes: 6d0060f600ad ("mptcp: Write MPTCP DSS headers to outgoing data packets") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-12mptcp: fix rcv space initializationPaolo Abeni
mptcp_rcv_space_init() is supposed to happen under the msk socket lock, but active msk socket does that without such protection. Leverage the existing mptcp_propagate_state() helper to that extent. We need to ensure mptcp_rcv_space_init will happen before mptcp_rcv_space_adjust(), and the release_cb does not assure that: explicitly check for such condition. While at it, move the wnd_end initialization out of mptcp_rcv_space_init(), it never belonged there. Note that the race does not produce ill effect in practice, but change allows cleaning-up and defying better the locking model. Fixes: a6b118febbab ("mptcp: add receive buffer auto-tuning") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-12mptcp: drop the push_pending fieldPaolo Abeni
Such field is there to avoid acquiring the data lock in a few spots, but it adds complexity to the already non trivial locking schema. All the relevant call sites (mptcp-level re-injection, set socket options), are slow-path, drop such field in favor of 'cb_flags', adding the relevant locking. This patch could be seen as an improvement, instead of a fix. But it simplifies the next patch. The 'Fixes' tag has been added to help having this series backported to stable. Fixes: e9d09baca676 ("mptcp: avoid atomic bit manipulation when possible") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-12tools/rtla: Exit with EXIT_SUCCESS when help is invokedJohn Kacur
Fix rtla so that the following commands exit with 0 when help is invoked rtla osnoise top -h rtla osnoise hist -h rtla timerlat top -h rtla timerlat hist -h Link: https://lore.kernel.org/linux-trace-devel/20240203001607.69703-1-jkacur@redhat.com Cc: stable@vger.kernel.org Fixes: 1eeb6328e8b3 ("rtla/timerlat: Add timerlat hist mode") Signed-off-by: John Kacur <jkacur@redhat.com> Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
2024-02-12tools/rtla: Replace setting prio with nice for SCHED_OTHERlimingming3
Since the sched_priority for SCHED_OTHER is always 0, it makes no sence to set it. Setting nice for SCHED_OTHER seems more meaningful. Link: https://lkml.kernel.org/r/20240207065142.1753909-1-limingming3@lixiang.com Cc: stable@vger.kernel.org Fixes: b1696371d865 ("rtla: Helper functions for rtla") Signed-off-by: limingming3 <limingming3@lixiang.com> Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
2024-02-12Merge branch 'net-misplaced-fields'David S. Miller
Eric Dumazet says: ==================== net: more three misplaced fields We recently reorganized some structures for better data locality in networking fast paths. This series moves three fields that were not correctly classified. There probably more to come. Reference : https://lwn.net/Articles/951321/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-12net-device: move lstats in net_device_read_txrxEric Dumazet
dev->lstats is notably used from loopback ndo_start_xmit() and other virtual drivers. Per cpu stats updates are dirtying per-cpu data, but the pointer itself is read-only. Fixes: 43a71cd66b9c ("net-device: reorganize net_device fast path variables") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Coco Li <lixiaoyan@google.com> Cc: Simon Horman <horms@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-12tcp: move tp->tcp_usec_ts to tcp_sock_read_txrx groupEric Dumazet
tp->tcp_usec_ts is a read mostly field, used in rx and tx fast paths. Fixes: d5fed5addb2b ("tcp: reorganize tcp_sock fast path variables") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Coco Li <lixiaoyan@google.com> Cc: Wei Wang <weiwan@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-12tcp: move tp->scaling_ratio to tcp_sock_read_txrx groupEric Dumazet
tp->scaling_ratio is a read mostly field, used in rx and tx fast paths. Fixes: d5fed5addb2b ("tcp: reorganize tcp_sock fast path variables") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Coco Li <lixiaoyan@google.com> Cc: Wei Wang <weiwan@google.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-12drm/i915/dp: Limit SST link rate to <=8.1GbpsVille Syrjälä
Limit the link rate to HBR3 or below (<=8.1Gbps) in SST mode. UHBR (10Gbps+) link rates require 128b/132b channel encoding which we have not yet hooked up into the SST/no-sideband codepaths. Cc: stable@vger.kernel.org Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240208154552.14545-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 6061811d72e14f41f71b6a025510920b187bfcca) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2024-02-12drm/i915/dsc: Fix the macro that calculates DSCC_/DSCA_ PPS reg addressManasi Navare
Commit bd077259d0a9 ("drm/i915/vdsc: Add function to read any PPS register") defines a new macro to calculate the DSC PPS register addresses with PPS number as an input. This macro correctly calculates the addresses till PPS 11 since the addresses increment by 4. So in that case the following macro works correctly to give correct register address: _MMIO(_DSCA_PPS_0 + (pps) * 4) However after PPS 11, the register address for PPS 12 increments by 12 because of RC Buffer memory allocation in between. Because of this discontinuity in the address space, the macro calculates wrong addresses for PPS 12 - 16 resulting into incorrect DSC PPS parameter value read/writes causing DSC corruption. This fixes it by correcting this macro to add the offset of 12 for PPS >=12. v3: Add correct paranthesis for pps argument (Jani Nikula) Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10172 Fixes: bd077259d0a9 ("drm/i915/vdsc: Add function to read any PPS register") Cc: Suraj Kandpal <suraj.kandpal@intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Cc: Animesh Manna <animesh.manna@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <sean@poorly.run> Cc: Drew Davenport <ddavenport@chromium.org> Signed-off-by: Manasi Navare <navaremanasi@chromium.org> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240205204619.1991673-1-navaremanasi@chromium.org (cherry picked from commit 6074be620c31dc2ae11af96a1a5ea95580976fb5) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2024-02-12tools/rv: Fix curr_reactor uninitialized variableDaniel Bristot de Oliveira
clang is reporting: $ make HOSTCC=clang CC=clang LLVM_IAS=1 clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables -fstack-clash-protection -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS $(pkg-config --cflags libtracefs) -I include -c -o src/in_kernel.o src/in_kernel.c [...] src/in_kernel.c:227:6: warning: variable 'curr_reactor' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] 227 | if (!end) | ^~~~ src/in_kernel.c:242:9: note: uninitialized use occurs here 242 | return curr_reactor; | ^~~~~~~~~~~~ src/in_kernel.c:227:2: note: remove the 'if' if its condition is always false 227 | if (!end) | ^~~~~~~~~ 228 | goto out_free; | ~~~~~~~~~~~~~ src/in_kernel.c:221:6: warning: variable 'curr_reactor' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized] 221 | if (!start) | ^~~~~~ src/in_kernel.c:242:9: note: uninitialized use occurs here 242 | return curr_reactor; | ^~~~~~~~~~~~ src/in_kernel.c:221:2: note: remove the 'if' if its condition is always false 221 | if (!start) | ^~~~~~~~~~~ 222 | goto out_free; | ~~~~~~~~~~~~~ src/in_kernel.c:215:20: note: initialize the variable 'curr_reactor' to silence this warning 215 | char *curr_reactor; | ^ | = NULL 2 warnings generated. Which is correct. Setting curr_reactor to NULL avoids the problem. Link: https://lkml.kernel.org/r/3a35551149e5ee0cb0950035afcb8082c3b5d05b.1707217097.git.bristot@kernel.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Bill Wendling <morbo@google.com> Cc: Justin Stitt <justinstitt@google.com> Cc: Donald Zickus <dzickus@redhat.com> Fixes: 6d60f89691fc ("tools/rv: Add in-kernel monitor interface") Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
2024-02-12tools/rv: Fix Makefile compiler options for clangDaniel Bristot de Oliveira
The following errors are showing up when compiling rv with clang: $ make HOSTCC=clang CC=clang LLVM_IAS=1 [...] clang -O -g -DVERSION=\"6.8.0-rc1\" -flto=auto -ffat-lto-objects -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables -fstack-clash-protection -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -Wno-maybe-uninitialized $(pkg-config --cflags libtracefs) -I include -c -o src/utils.o src/utils.c clang: warning: optimization flag '-ffat-lto-objects' is not supported [-Wignored-optimization-argument] warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean '-Wno-uninitialized'? [-Wunknown-warning-option] 1 warning generated. clang -o rv -ggdb src/in_kernel.o src/rv.o src/trace.o src/utils.o $(pkg-config --libs libtracefs) src/in_kernel.o: file not recognized: file format not recognized clang: error: linker command failed with exit code 1 (use -v to see invocation) make: *** [Makefile:110: rv] Error 1 Solve these issues by: - removing -ffat-lto-objects and -Wno-maybe-uninitialized if using clang - informing the linker about -flto=auto Link: https://lkml.kernel.org/r/ed94a8ddc2ca8c8ef663cfb7ae9dd196c4a66b33.1707217097.git.bristot@kernel.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Bill Wendling <morbo@google.com> Cc: Justin Stitt <justinstitt@google.com> Fixes: 4bc4b131d44c ("rv: Add rv tool") Suggested-by: Donald Zickus <dzickus@redhat.com> Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
2024-02-12tools/rtla: Remove unused sched_getattr() functionDaniel Bristot de Oliveira
Clang is reporting: $ make HOSTCC=clang CC=clang LLVM_IAS=1 [...] clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables -fstack-clash-protection -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS $(pkg-config --cflags libtracefs) -c -o src/utils.o src/utils.c src/utils.c:241:19: warning: unused function 'sched_getattr' [-Wunused-function] 241 | static inline int sched_getattr(pid_t pid, struct sched_attr *attr, | ^~~~~~~~~~~~~ 1 warning generated. Which is correct, so remove the unused function. Link: https://lkml.kernel.org/r/eaed7ba122c4ae88ce71277c824ef41cbf789385.1707217097.git.bristot@kernel.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Bill Wendling <morbo@google.com> Cc: Justin Stitt <justinstitt@google.com> Cc: Donald Zickus <dzickus@redhat.com> Fixes: b1696371d865 ("rtla: Helper functions for rtla") Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
2024-02-12tools/rtla: Fix clang warning about mount_point var sizeDaniel Bristot de Oliveira
clang is reporting this warning: $ make HOSTCC=clang CC=clang LLVM_IAS=1 [...] clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables -fstack-clash-protection -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS $(pkg-config --cflags libtracefs) -c -o src/utils.o src/utils.c src/utils.c:548:66: warning: 'fscanf' may overflow; destination buffer in argument 3 has size 1024, but the corresponding specifier may require size 1025 [-Wfortify-source] 548 | while (fscanf(fp, "%*s %" STR(MAX_PATH) "s %99s %*s %*d %*d\n", mount_point, type) == 2) { | ^ Increase mount_point variable size to MAX_PATH+1 to avoid the overflow. Link: https://lkml.kernel.org/r/1b46712e93a2f4153909514a36016959dcc4021c.1707217097.git.bristot@kernel.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Bill Wendling <morbo@google.com> Cc: Justin Stitt <justinstitt@google.com> Cc: Donald Zickus <dzickus@redhat.com> Fixes: a957cbc02531 ("rtla: Add -C cgroup support") Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
2024-02-12tools/rtla: Fix uninitialized bucket/data->bucket_size warningDaniel Bristot de Oliveira
When compiling rtla with clang, I am getting the following warnings: $ make HOSTCC=clang CC=clang LLVM_IAS=1 [..] clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables -fstack-clash-protection -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS $(pkg-config --cflags libtracefs) -c -o src/osnoise_hist.o src/osnoise_hist.c src/osnoise_hist.c:138:6: warning: variable 'bucket' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] 138 | if (data->bucket_size) | ^~~~~~~~~~~~~~~~~ src/osnoise_hist.c:149:6: note: uninitialized use occurs here 149 | if (bucket < entries) | ^~~~~~ src/osnoise_hist.c:138:2: note: remove the 'if' if its condition is always true 138 | if (data->bucket_size) | ^~~~~~~~~~~~~~~~~~~~~~ 139 | bucket = duration / data->bucket_size; src/osnoise_hist.c:132:12: note: initialize the variable 'bucket' to silence this warning 132 | int bucket; | ^ | = 0 1 warning generated. [...] clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables -fstack-clash-protection -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS $(pkg-config --cflags libtracefs) -c -o src/timerlat_hist.o src/timerlat_hist.c src/timerlat_hist.c:181:6: warning: variable 'bucket' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized] 181 | if (data->bucket_size) | ^~~~~~~~~~~~~~~~~ src/timerlat_hist.c:204:6: note: uninitialized use occurs here 204 | if (bucket < entries) | ^~~~~~ src/timerlat_hist.c:181:2: note: remove the 'if' if its condition is always true 181 | if (data->bucket_size) | ^~~~~~~~~~~~~~~~~~~~~~ 182 | bucket = latency / data->bucket_size; src/timerlat_hist.c:175:12: note: initialize the variable 'bucket' to silence this warning 175 | int bucket; | ^ | = 0 1 warning generated. This is a legit warning, but data->bucket_size is always > 0 (see timerlat_hist_parse_args()), so the if is not necessary. Remove the unneeded if (data->bucket_size) to avoid the warning. Link: https://lkml.kernel.org/r/6e1b1665cd99042ae705b3e0fc410858c4c42346.1707217097.git.bristot@kernel.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Bill Wendling <morbo@google.com> Cc: Justin Stitt <justinstitt@google.com> Cc: Donald Zickus <dzickus@redhat.com> Fixes: 1eeb6328e8b3 ("rtla/timerlat: Add timerlat hist mode") Fixes: 829a6c0b5698 ("rtla/osnoise: Add the hist mode") Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
2024-02-12tools/rtla: Fix Makefile compiler options for clangDaniel Bristot de Oliveira
The following errors are showing up when compiling rtla with clang: $ make HOSTCC=clang CC=clang LLVM_IAS=1 [...] clang -O -g -DVERSION=\"6.8.0-rc1\" -flto=auto -ffat-lto-objects -fexceptions -fstack-protector-strong -fasynchronous-unwind-tables -fstack-clash-protection -Wall -Werror=format-security -Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS -Wno-maybe-uninitialized $(pkg-config --cflags libtracefs) -c -o src/utils.o src/utils.c clang: warning: optimization flag '-ffat-lto-objects' is not supported [-Wignored-optimization-argument] warning: unknown warning option '-Wno-maybe-uninitialized'; did you mean '-Wno-uninitialized'? [-Wunknown-warning-option] 1 warning generated. clang -o rtla -ggdb src/osnoise.o src/osnoise_hist.o src/osnoise_top.o src/rtla.o src/timerlat_aa.o src/timerlat.o src/timerlat_hist.o src/timerlat_top.o src/timerlat_u.o src/trace.o src/utils.o $(pkg-config --libs libtracefs) src/osnoise.o: file not recognized: file format not recognized clang: error: linker command failed with exit code 1 (use -v to see invocation) make: *** [Makefile:110: rtla] Error 1 Solve these issues by: - removing -ffat-lto-objects and -Wno-maybe-uninitialized if using clang - informing the linker about -flto=auto Link: https://lore.kernel.org/linux-trace-kernel/567ac1b94effc228ce9a0225b9df7232a9b35b55.1707217097.git.bristot@kernel.org Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Bill Wendling <morbo@google.com> Cc: Justin Stitt <justinstitt@google.com> Fixes: 1a7b22ab15eb ("tools/rtla: Build with EXTRA_{C,LD}FLAGS") Suggested-by: Donald Zickus <dzickus@redhat.com> Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
2024-02-12accel/ivpu: Fix DevTLB errors on suspend/resume and recoveryJacek Lawrynowicz
Issue IP reset before shutdown in order to complete all upstream requests to the SOC. Without this DevTLB is complaining about incomplete transactions and NPU cannot resume from suspend. This problem is only happening on recent IFWI releases. IP reset in rare corner cases can mess up PCI configuration, so save it before the reset. After this happens it is also impossible to issue PLL requests and D0->D3->D0 cycle is needed to recover the NPU. Add WP 0 request on power up, so the PUNIT is always notified about NPU reset. Use D0/D3 cycle for recovery as it can recover from failed IP reset and FLR cannot. Fixes: 3f7c0634926d ("accel/ivpu/37xx: Fix hangs related to MMIO reset") Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240207102446.3126981-1-jacek.lawrynowicz@linux.intel.com
2024-02-12ASoC: Intel: Boards: Fix NULL pointer deref in BYT/CHTMark Brown
Merge series from Hans de Goede <hdegoede@redhat.com>: While testing 6.8 on a Bay Trail device with a ALC5640 codec I noticed a regression in 6.8 which causes a NULL pointer deref in probe(). All BYT/CHT Intel machine drivers are affected. Patch 1/2 of this series fixes all of them. Patch 2/2 adds some small cleanups to cht_bsw_rt5645.c for issues which I noticed while working on 1/2.
2024-02-11cifs: update the same create_guid on replayShyam Prasad N
File open requests made to the server contain a CreateGuid, which is used by the server to identify the open request. If the same request needs to be replayed, it needs to be sent with the same CreateGuid in the durable handle v2 context. Without doing so, we could end up leaking handles on the server when: 1. multichannel is used AND 2. connection goes down, but not for all channels This is because the replayed open request would have a new CreateGuid and the server will treat this as a new request and open a new handle. This change fixes this by reusing the existing create_guid stored in the cached fid struct. REF: MS-SMB2 4.9 Replay Create Request on an Alternate Channel Fixes: 4f1fffa23769 ("cifs: commands that are retried should have replay flag set") Signed-off-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2024-02-11cifs: fix underflow in parse_server_interfaces()Dan Carpenter
In this loop, we step through the buffer and after each item we check if the size_left is greater than the minimum size we need. However, the problem is that "bytes_left" is type ssize_t while sizeof() is type size_t. That means that because of type promotion, the comparison is done as an unsigned and if we have negative bytes left the loop continues instead of ending. Fixes: fe856be475f7 ("CIFS: parse and store info on iface queries") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 04:21:05 +0000