| Age | Commit message (Collapse) | Author |
|---|
|
Using mmio to do queue reset.
v2: Alignment this function with gfx9/gfx9.4.3.
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fill ip version in pm_metrics for SMU v13.0.12
v2: Remove ip version check(Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch removes useless NULL pointer checks in functions like
ci_set_private_data_variables_based_on_pptable() and
ci_setup_default_dpm_tables().
The pointers in question are initialized as addresses to existing
structures such as rdev->pm.dpm.dyn_state.vddc_dependency_on_sclk by
utilizing & operator and therefore are not in danger of being NULL.
Fix this by removing extra checks thus cleaning the code a tiny bit.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: cc8dbbb4f62a ("drm/radeon: add dpm support for CI dGPUs (v2)")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
There could be configs where some UMC instances are harvested. This
information is obtained through discovery data and populated in
umc.active_mask. Avoid reassigning this as AID mask, instead use the
mask directly while iterating through umc instances. This is to avoid
accesses to harvested UMC instances.
v2: fix warning (Alex)
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Populate pmfw version for SMU v13.0.12 to device struct
v2: Remove ip version check to get smu version
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Set GC 9.5.0 noretry default as 1 for better performance. It can be
changed by the administrator using amdgpu.noretry=0 or by the user using
HSA_XNACK=1 environment variable.
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviwanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Harvest table is applied for gfx950.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Some chips have a larger VBIOS file so raise the size limit to support
the flashing tool.
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
kfd_device_by_pci_dev(), kfd_get_pasid_limit() and kfd_set_pasid_limit()
have been unused since 2023's
commit c99a2e7ae291 ("drm/amdkfd: drop IOMMUv2 support")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Now that we can select a workload profile dynamically when
we submit work, it's best to default to the bootup
default workload profile. Defaulting to other profiles
prevents some power management features from kicking in
during idle periods. Once all jobs have finished, the
workload profile will automatically move back to default
bootup for max power savings.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable dynamic workload profile switching for gfx12.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable dynamic workload profile switching for gfx11.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable dynamic workload profile switching for gfx10.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add helpers to switch the workload profile dynamically when
commands are submitted. This allows us to switch to
the FULLSCREEN3D or COMPUTE profile when work is submitted.
Add a delayed work handler to delay switching out of the
selected profile if additional work comes in. This works
the same as the VIDEO profile for VCN. This lets dynamically
enable workload profiles on the fly and then move back
to the default when there is no work.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Current kfd driver has its own PASID value for a kfd process and uses it to
locate vm at interrupt handler or mapping between kfd process and vm. That
design is not working when a physical gpu device has multiple spatial
partitions, ex: adev in CPX mode. This patch has kfd driver use same pasid
values that graphic driver generated which is per vm per pasid.
These pasid values are passed to fw/hardware. We do not need change interrupt
handler though more pasid values are used. Also, pasid values at log are
replaced by user process pid; pasid values are not exposed to user. Users see
their process pids that have meaning in user space.
Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
RRMT could get dynamically enabled/disabled by PSP firmware. Read the
status from register for reading RRMT status. For VFs, this is not
accessible, hence assume that it's always disabled for now.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
RRMT could get dynamically enabled/disabled by PSP firmware. Read the
status from register for reading RRMT status. For VFs, this is not
accessible, hence assume that it's always disabled for now.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add RRMT control register offset for VCN v4.0.3
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This initializes PSP IP version 14.0.5.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This initializes SMU IP version 14.0.5.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable VCN/JPEG CGPG for ASIC with GFX version 11.5.3.
Signed-off-by: Saleemkhan Jamadar <saleemkhan.jamadar@amd.com>
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This initializes MMHUB IP version 3.3.2.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This initializes NBIO IP version 7.11.2.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This initializes SDMA IP version 6.1.3.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This initializes GC IP version 11.5.3.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It uses the VGADCC bus. DC doesn't use this bus, so it
is safe to add it here.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
No functional change. Rework the code to allow for
adding some additional i2c buses in conjunction with DC
in the future.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This was leftover from when amdgpu was forked from radeon.
The function is empty so drop it.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Use the value pulled from the vbios just like newer chips.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The fields are marked as reserved in atom_firmware_info_v3_1,
but thet contain valid data in all of the vbios images I've
looked at so add parse these fields as per
atom_firmware_info_v3_2. The offsets are the same and the
reset of the structure is the same.
v2: squash in NULL checks
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Expose the OEM i2c bus on boards that support it.
This bus is used for OEM specific features like RGB, etc.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Allow the creation of an OEM i2c bus and use the proper
DC helpers for that case.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This is the i2c bus used by OEMs for board specific i2c features
like RGB.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
DC supports SW i2c as well. Drop the check.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
link_index can be fetched from the ddc_service; no need for a separate
parameter. res is not used.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
increase max rings to 132 to support all JPEG5_0_1 cores, else
ring_init fails due to ring count exceeding maximum limit.
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
It malicious user provides a small pptable through sysfs and then
a bigger pptable, it may cause buffer overflow attack in function
smu_sys_set_pp_table().
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jiang Liu <gerry@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
It is possible for some waves in a workgroup to finish their save
sequence before the group leader has had time to capture the workgroup
barrier state. When this happens, having those waves exit do impact the
barrier state. As a consequence, the state captured by the group leader
is invalid, and is eventually incorrectly restored.
This patch proposes to have all waves in a workgroup wait for each other
at the end of their save sequence (just before calling s_endpgm_saved).
Signed-off-by: Lancelot SIX <lancelot.six@amd.com>
Reviewed-by: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.12.x
|
|
In function psp_init_cap_microcode(), it should bail out when failed to
load firmware, otherwise it may cause invalid memory access.
Fixes: 07dbfc6b102e ("drm/amd: Use `amdgpu_ucode_*` helpers for PSP")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jiang Liu <gerry@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The destructor of a gtt bo is declared as
void amdgpu_amdkfd_free_gtt_mem(struct amdgpu_device *adev, void **mem_obj);
Which takes void** as the second parameter.
GCC allows passing void* to the function because void* can be implicitly
casted to any other types, so it can pass compiling.
However, passing this void* parameter into the function's
execution process(which expects void** and dereferencing void**)
will result in errors.
Signed-off-by: Zhu Lingshan <lingshan.zhu@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Fixes: fb91065851cd ("drm/amdkfd: Refactor queue wptr_bo GART mapping")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Bump the driver version for RV/PCO compute stability fix
so mesa can use this check to enable compute queues on
RV/PCO.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.12.x
|
|
When mesa started using compute queues more often
we started seeing additional hangs with compute queues.
Disabling gfxoff seems to mitigate that. Manually
control gfxoff and gfx pg with command submissions to avoid
any issues related to gfxoff. KFD already does the same
thing for these chips.
v2: limit to compute
v3: limit to APUs
v4: limit to Raven/PCO
v5: only update the compute ring_funcs
v6: Disable GFX PG
v7: adjust order
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Suggested-by: Błażej Szczygieł <mumei6102@gmail.com>
Suggested-by: Sergey Kovalenko <seryoga.engineering@gmail.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3861
Link: https://lists.freedesktop.org/archives/amd-gfx/2025-January/119116.html
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.12.x
|
|
UVD and VCN were split into separate dpm helpers in commit
ff69bba05f08 ("drm/amd/pm: add inst to dpm_set_powergating_by_smu")
as such, there is no need to include UVD in the is_vcn variable since
UVD and VCN are handled by separate dpm helpers now. Fix the check.
Fixes: ff69bba05f08 ("drm/amd/pm: add inst to dpm_set_powergating_by_smu")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3959
Link: https://lists.freedesktop.org/archives/amd-gfx/2025-February/119827.html
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Boyuan Zhang <boyuan.zhang@amd.com>
|
|
This reverts commit
a2b5a9956269 ("drm/amd/display: Use HW lock mgr for PSR1")
Because it may cause system hang while connect with two edp panel.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Currently, there are several files in drm/amd/display that aim to have a
higher -Wframe-larger-than value to avoid instances of that warning with
a lower value from the user's configuration. However, with the way that
it is currently implemented, it does not respect the user's request via
CONFIG_FRAME_WARN for a higher stack frame limit, which can cause pain
when new instances of the warning appear and break the build due to
CONFIG_WERROR.
Adjust the logic to switch from a hard coded -Wframe-larger-than value
to only using the value as a minimum clamp and deferring to the
requested value from CONFIG_FRAME_WARN if it is higher.
Suggested-by: Harry Wentland <harry.wentland@amd.com>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Closes: https://lore.kernel.org/2025013003-audience-opposing-7f95@gregkh/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHY]
When the system powers up eDP with external monitors in seamless boot
sequence, stutter get enabled before TTU and HUBP registers being
programmed, which resulting in underflow.
[HOW]
Enable TTU in hubp_init.
Change the sequence that do not perpare_bandwidth and optimize_bandwidth
while having seamless boot streams.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Lo-an Chen <lo-an.chen@amd.com>
Signed-off-by: Paul Hsieh <paul.hsieh@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[WHAT & HOW]
hpo_stream_to_link_encoder_mapping has size MAX_HPO_DP2_ENCODERS(=4),
but location can have size up to 6. As a result, it is necessary to
check location against MAX_HPO_DP2_ENCODERS.
Similiarly, disp_cfg_stream_location can be used as an array index which
should be 0..5, so the ASSERT's conditions should be less without equal.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3904
Reviewed-by: Austin Zheng <Austin.Zheng@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Vulkan can't support DCC and Z/S compression on GFX12 without
WRITE_COMPRESS_DISABLE in this commit or a completely different DCC
interface.
AMDGPU_TILING_GFX12_SCANOUT is added because it's already used by userspace.
Cc: stable@vger.kernel.org # 6.12.x
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- Fix regression that affinitized forked child in one-shot mode.
- Harden one-shot mode against hotplug online/offline
- Enable RAPL SysWatt column by default
- Add initial PTL, CWF platform support
- Harden initial PMT code in response to early use
- Enable first built-in PMT counter: CWF c1e residency
- Refuse to run on unsupported platforms without --force, to encourage
updating to a version that supports the system, and to avoid
no-so-useful measurement results
* tag 'turbostat-2025.02.02' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (25 commits)
tools/power turbostat: version 2025.02.02
tools/power turbostat: Add CPU%c1e BIC for CWF
tools/power turbostat: Harden one-shot mode against cpu offline
tools/power turbostat: Fix forked child affinity regression
tools/power turbostat: Add tcore clock PMT type
tools/power turbostat: version 2025.01.14
tools/power turbostat: Allow adding PMT counters directly by sysfs path
tools/power turbostat: Allow mapping multiple PMT files with the same GUID
tools/power turbostat: Add PMT directory iterator helper
tools/power turbostat: Extend PMT identification with a sequence number
tools/power turbostat: Return default value for unmapped PMT domains
tools/power turbostat: Check for non-zero value when MSR probing
tools/power turbostat: Enhance turbostat self-performance visibility
tools/power turbostat: Add fixed RAPL PSYS divisor for SPR
tools/power turbostat: Fix PMT mmaped file size rounding
tools/power turbostat: Remove SysWatt from DISABLED_BY_DEFAULT
tools/power turbostat: Add an NMI column
tools/power turbostat: add Busy% to "show idle"
tools/power turbostat: Introduce --force parameter
tools/power turbostat: Improve --help output
...
|
