summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-10-27net/mlx5e: Fix macsec rx security association (SA) update/deleteRaed Salem
The cited commit adds the support for update/delete MACsec Rx SA, naturally, these operations need to check if the SA in question exists to update/delete the SA and return error code otherwise, however they do just the opposite i.e. return with error if the SA exists Fix by change the check to return error in case the SA in question does not exist, adjust error message and code accordingly. Fixes: aae3454e4d4c ("net/mlx5e: Add MACsec offload Rx command support") Signed-off-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20221026135153.154807-14-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-27net/mlx5e: Fix macsec coverity issue at rx sa updateRaed Salem
The cited commit at update rx sa operation passes object attributes to MACsec object create function without initializing/setting all attributes fields leaving some of them with garbage values, therefore violating the implicit assumption at create object function, which assumes that all input object attributes fields are set. Fix by initializing the object attributes struct to zero, thus leaving unset fields with the legal zero value. Fixes: aae3454e4d4c ("net/mlx5e: Add MACsec offload Rx command support") Signed-off-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Lior Nahmanson <liorna@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20221026135153.154807-13-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-27net/mlx5: Fix crash during sync firmware resetSuresh Devarakonda
When setting Bluefield to DPU NIC mode using mlxconfig tool + sync firmware reset flow, we run into scenario where the host was not eswitch manager at the time of mlx5 driver load but becomes eswitch manager after the sync firmware reset flow. This results in null pointer access of mpfs structure during mac filter add. This change prevents null pointer access but mpfs table entries will not be added. Fixes: 5ec697446f46 ("net/mlx5: Add support for devlink reload action fw activate") Signed-off-by: Suresh Devarakonda <ramad@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Bodong Wang <bodong@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20221026135153.154807-12-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-27net/mlx5: Update fw fatal reporter state on PCI handlers successful recoverRoy Novich
Update devlink health fw fatal reporter state to "healthy" is needed by strictly calling devlink_health_reporter_state_update() after recovery was done by PCI error handler. This is needed when fw_fatal reporter was triggered due to PCI error. Poll health is called and set reporter state to error. Health recovery failed (since EEH didn't re-enable the PCI). PCI handlers keep on recover flow and succeed later without devlink acknowledgment. Fix this by adding devlink state update at the end of the PCI handler recovery process. Fixes: 6181e5cb752e ("devlink: add support for reporter recovery completion") Signed-off-by: Roy Novich <royno@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20221026135153.154807-11-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-27net/mlx5e: TC, Fix cloned flow attr instance dests are not zeroedRoi Dayan
On multi table split the driver creates a new attr instance with data being copied from prev attr instance zeroing action flags. Also need to reset dests properties to avoid incorrect dests per attr. Fixes: 8300f225268b ("net/mlx5e: Create new flow attr for multi table actions") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20221026135153.154807-10-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-27net/mlx5e: TC, Reject forwarding from internal port to internal portAriel Levkovich
Reject TC rules that forward from internal port to internal port as it is not supported. This include rules that are explicitly have internal port as the filter device as well as rules that apply on tunnel interfaces as the route device for the tunnel interface can be an internal port. Fixes: 27484f7170ed ("net/mlx5e: Offload tc rules that redirect to ovs internal port") Signed-off-by: Ariel Levkovich <lariel@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20221026135153.154807-9-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-27net/mlx5: Fix possible use-after-free in async command interfaceTariq Toukan
mlx5_cmd_cleanup_async_ctx should return only after all its callback handlers were completed. Before this patch, the below race between mlx5_cmd_cleanup_async_ctx and mlx5_cmd_exec_cb_handler was possible and lead to a use-after-free: 1. mlx5_cmd_cleanup_async_ctx is called while num_inflight is 2 (i.e. elevated by 1, a single inflight callback). 2. mlx5_cmd_cleanup_async_ctx decreases num_inflight to 1. 3. mlx5_cmd_exec_cb_handler is called, decreases num_inflight to 0 and is about to call wake_up(). 4. mlx5_cmd_cleanup_async_ctx calls wait_event, which returns immediately as the condition (num_inflight == 0) holds. 5. mlx5_cmd_cleanup_async_ctx returns. 6. The caller of mlx5_cmd_cleanup_async_ctx frees the mlx5_async_ctx object. 7. mlx5_cmd_exec_cb_handler goes on and calls wake_up() on the freed object. Fix it by syncing using a completion object. Mark it completed when num_inflight reaches 0. Trace: BUG: KASAN: use-after-free in do_raw_spin_lock+0x23d/0x270 Read of size 4 at addr ffff888139cd12f4 by task swapper/5/0 CPU: 5 PID: 0 Comm: swapper/5 Not tainted 6.0.0-rc3_for_upstream_debug_2022_08_30_13_10 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0x57/0x7d print_report.cold+0x2d5/0x684 ? do_raw_spin_lock+0x23d/0x270 kasan_report+0xb1/0x1a0 ? do_raw_spin_lock+0x23d/0x270 do_raw_spin_lock+0x23d/0x270 ? rwlock_bug.part.0+0x90/0x90 ? __delete_object+0xb8/0x100 ? lock_downgrade+0x6e0/0x6e0 _raw_spin_lock_irqsave+0x43/0x60 ? __wake_up_common_lock+0xb9/0x140 __wake_up_common_lock+0xb9/0x140 ? __wake_up_common+0x650/0x650 ? destroy_tis_callback+0x53/0x70 [mlx5_core] ? kasan_set_track+0x21/0x30 ? destroy_tis_callback+0x53/0x70 [mlx5_core] ? kfree+0x1ba/0x520 ? do_raw_spin_unlock+0x54/0x220 mlx5_cmd_exec_cb_handler+0x136/0x1a0 [mlx5_core] ? mlx5_cmd_cleanup_async_ctx+0x220/0x220 [mlx5_core] ? mlx5_cmd_cleanup_async_ctx+0x220/0x220 [mlx5_core] mlx5_cmd_comp_handler+0x65a/0x12b0 [mlx5_core] ? dump_command+0xcc0/0xcc0 [mlx5_core] ? lockdep_hardirqs_on_prepare+0x400/0x400 ? cmd_comp_notifier+0x7e/0xb0 [mlx5_core] cmd_comp_notifier+0x7e/0xb0 [mlx5_core] atomic_notifier_call_chain+0xd7/0x1d0 mlx5_eq_async_int+0x3ce/0xa20 [mlx5_core] atomic_notifier_call_chain+0xd7/0x1d0 ? irq_release+0x140/0x140 [mlx5_core] irq_int_handler+0x19/0x30 [mlx5_core] __handle_irq_event_percpu+0x1f2/0x620 handle_irq_event+0xb2/0x1d0 handle_edge_irq+0x21e/0xb00 __common_interrupt+0x79/0x1a0 common_interrupt+0x78/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 RIP: 0010:default_idle+0x42/0x60 Code: c1 83 e0 07 48 c1 e9 03 83 c0 03 0f b6 14 11 38 d0 7c 04 84 d2 75 14 8b 05 eb 47 22 02 85 c0 7e 07 0f 00 2d e0 9f 48 00 fb f4 <c3> 48 c7 c7 80 08 7f 85 e8 d1 d3 3e fe eb de 66 66 2e 0f 1f 84 00 RSP: 0018:ffff888100dbfdf0 EFLAGS: 00000242 RAX: 0000000000000001 RBX: ffffffff84ecbd48 RCX: 1ffffffff0afe110 RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffffffff835cc9bc RBP: 0000000000000005 R08: 0000000000000001 R09: ffff88881dec4ac3 R10: ffffed1103bd8958 R11: 0000017d0ca571c9 R12: 0000000000000005 R13: ffffffff84f024e0 R14: 0000000000000000 R15: dffffc0000000000 ? default_idle_call+0xcc/0x450 default_idle_call+0xec/0x450 do_idle+0x394/0x450 ? arch_cpu_idle_exit+0x40/0x40 ? do_idle+0x17/0x450 cpu_startup_entry+0x19/0x20 start_secondary+0x221/0x2b0 ? set_cpu_sibling_map+0x2070/0x2070 secondary_startup_64_no_verify+0xcd/0xdb </TASK> Allocated by task 49502: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x81/0xa0 kvmalloc_node+0x48/0xe0 mlx5e_bulk_async_init+0x35/0x110 [mlx5_core] mlx5e_tls_priv_tx_list_cleanup+0x84/0x3e0 [mlx5_core] mlx5e_ktls_cleanup_tx+0x38f/0x760 [mlx5_core] mlx5e_cleanup_nic_tx+0xa7/0x100 [mlx5_core] mlx5e_detach_netdev+0x1ca/0x2b0 [mlx5_core] mlx5e_suspend+0xdb/0x140 [mlx5_core] mlx5e_remove+0x89/0x190 [mlx5_core] auxiliary_bus_remove+0x52/0x70 device_release_driver_internal+0x40f/0x650 driver_detach+0xc1/0x180 bus_remove_driver+0x125/0x2f0 auxiliary_driver_unregister+0x16/0x50 mlx5e_cleanup+0x26/0x30 [mlx5_core] cleanup+0xc/0x4e [mlx5_core] __x64_sys_delete_module+0x2b5/0x450 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Freed by task 49502: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_set_free_info+0x20/0x30 ____kasan_slab_free+0x11d/0x1b0 kfree+0x1ba/0x520 mlx5e_tls_priv_tx_list_cleanup+0x2e7/0x3e0 [mlx5_core] mlx5e_ktls_cleanup_tx+0x38f/0x760 [mlx5_core] mlx5e_cleanup_nic_tx+0xa7/0x100 [mlx5_core] mlx5e_detach_netdev+0x1ca/0x2b0 [mlx5_core] mlx5e_suspend+0xdb/0x140 [mlx5_core] mlx5e_remove+0x89/0x190 [mlx5_core] auxiliary_bus_remove+0x52/0x70 device_release_driver_internal+0x40f/0x650 driver_detach+0xc1/0x180 bus_remove_driver+0x125/0x2f0 auxiliary_driver_unregister+0x16/0x50 mlx5e_cleanup+0x26/0x30 [mlx5_core] cleanup+0xc/0x4e [mlx5_core] __x64_sys_delete_module+0x2b5/0x450 do_syscall_64+0x3d/0x90 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Fixes: e355477ed9e4 ("net/mlx5: Make mlx5_cmd_exec_cb() a safe API") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20221026135153.154807-8-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-27net/mlx5: ASO, Create the ASO SQ with the correct timestamp formatSaeed Mahameed
mlx5 SQs must select the timestamp format explicitly according to the active clock mode, select the current active timestamp mode so ASO SQ create will succeed. This fixes the following error prints when trying to create ipsec ASO SQ while the timestamp format is real time mode. mlx5_cmd_out_err:778:(pid 34874): CREATE_SQ(0x904) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0xd61c0b), err(-22) mlx5_aso_create_sq:285:(pid 34874): Failed to open aso wq sq, err=-22 mlx5e_ipsec_init:436:(pid 34874): IPSec initialization failed, -22 Fixes: cdd04f4d4d71 ("net/mlx5: Add support to create SQ and CQ for ASO") Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reported-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20221026135153.154807-7-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-27net/mlx5e: Update restore chain id for slow path packetsPaul Blakey
Currently encap slow path rules just forward to software without setting the chain id miss register, so driver doesn't restore the chain, and packets hitting this rule will restart from tc chain 0 instead of continuing to the chain the encap rule was on. Fix this by setting the chain id miss register to the chain id mapping. Fixes: 8f1e0b97cc70 ("net/mlx5: E-Switch, Mark miss packets with new chain id mapping") Signed-off-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20221026135153.154807-6-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-27net/mlx5e: Extend SKB room check to include PTP-SQAya Levin
When tx_port_ts is set, the driver diverts all UPD traffic over PTP port to a dedicated PTP-SQ. The SKBs are cached until the wire-CQE arrives. When the packet size is greater then MTU, the firmware might drop it and the packet won't be transmitted to the wire, hence the wire-CQE won't reach the driver. In this case the SKBs are accumulated in the SKB fifo. Add room check to consider the PTP-SQ SKB fifo, when the SKB fifo is full, driver stops the queue resulting in a TX timeout. Devlink TX-reporter can recover from it. Fixes: 1880bc4e4a96 ("net/mlx5e: Add TX port timestamp support") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20221026135153.154807-5-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-27net/mlx5: DR, Fix matcher disconnect error flowRongwei Liu
When 2nd flow rules arrives, it will merge together with the 1st one if matcher criteria is the same. If merge fails, driver will rollback the merge contents, and reject the 2nd rule. At rollback stage, matcher can't be disconnected unconditionally, otherise the 1st rule can't be hit anymore. Add logic to check if the matcher should be disconnected or not. Fixes: cc2295cd54e4 ("net/mlx5: DR, Improve steering for empty or RX/TX-only matchers") Signed-off-by: Rongwei Liu <rongweil@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20221026135153.154807-4-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-27net/mlx5: Wait for firmware to enable CRS before pci_restore_stateMoshe Shemesh
After firmware reset driver should verify firmware already enabled CRS and became responsive to pci config cycles before restoring pci state. Fix that by waiting till device_id is readable through PCI again. Fixes: eabe8e5e88f5 ("net/mlx5: Handle sync reset now event") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20221026135153.154807-3-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-27net/mlx5e: Do not increment ESN when updating IPsec ESN stateHyong Youb Kim
An offloaded SA stops receiving after about 2^32 + replay_window packets. For example, when SA reaches <seq-hi 0x1, seq 0x2c>, all subsequent packets get dropped with SA-icv-failure (integrity_failed). To reproduce the bug: - ConnectX-6 Dx with crypto enabled (FW 22.30.1004) - ipsec.conf: nic-offload = yes replay-window = 32 esn = yes salifetime=24h - Run netperf for a long time to send more than 2^32 packets netperf -H <device-under-test> -t TCP_STREAM -l 20000 When 2^32 + replay_window packets are received, the replay window moves from the 2nd half of subspace (overlap=1) to the 1st half (overlap=0). The driver then updates the 'esn' value in NIC (i.e. seq_hi) as follows. seq_hi = xfrm_replay_seqhi(seq_bottom) new esn in NIC = seq_hi + 1 The +1 increment is wrong, as seq_hi already contains the correct seq_hi. For example, when seq_hi=1, the driver actually tells NIC to use seq_hi=2 (esn). This incorrect esn value causes all subsequent packets to fail integrity checks (SA-icv-failure). So, do not increment. Fixes: cb01008390bb ("net/mlx5: IPSec, Add support for ESN") Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com> Acked-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20221026135153.154807-2-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-27Merge branch 'fix-some-issues-in-netdevsim-driver'Jakub Kicinski
Zhengchao Shao says: ==================== fix some issues in netdevsim driver When strace tool is used to perform memory injection, memory leaks and files not removed issues are found. Fix them. ==================== Link: https://lore.kernel.org/r/20221026014642.116261-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-27netdevsim: remove dir in nsim_dev_debugfs_init() when creating ports dir failedZhengchao Shao
Remove dir in nsim_dev_debugfs_init() when creating ports dir failed. Otherwise, the netdevsim device will not be created next time. Kernel reports an error: debugfs: Directory 'netdevsim1' with parent 'netdevsim' already present! Fixes: ab1d0cc004d7 ("netdevsim: change debugfs tree topology") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-27netdevsim: fix memory leak in nsim_drv_probe() when ↵Zhengchao Shao
nsim_dev_resources_register() failed If some items in nsim_dev_resources_register() fail, memory leak will occur. The following is the memory leak information. unreferenced object 0xffff888074c02600 (size 128): comm "echo", pid 8159, jiffies 4294945184 (age 493.530s) hex dump (first 32 bytes): 40 47 ea 89 ff ff ff ff 01 00 00 00 00 00 00 00 @G.............. ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ backtrace: [<0000000011a31c98>] kmalloc_trace+0x22/0x60 [<0000000027384c69>] devl_resource_register+0x144/0x4e0 [<00000000a16db248>] nsim_drv_probe+0x37a/0x1260 [<000000007d1f448c>] really_probe+0x20b/0xb10 [<00000000c416848a>] __driver_probe_device+0x1b3/0x4a0 [<00000000077e0351>] driver_probe_device+0x49/0x140 [<0000000054f2465a>] __device_attach_driver+0x18c/0x2a0 [<000000008538f359>] bus_for_each_drv+0x151/0x1d0 [<0000000038e09747>] __device_attach+0x1c9/0x4e0 [<00000000dd86e533>] bus_probe_device+0x1d5/0x280 [<00000000839bea35>] device_add+0xae0/0x1cb0 [<000000009c2abf46>] new_device_store+0x3b6/0x5f0 [<00000000fb823d7f>] bus_attr_store+0x72/0xa0 [<000000007acc4295>] sysfs_kf_write+0x106/0x160 [<000000005f50cb4d>] kernfs_fop_write_iter+0x3a8/0x5a0 [<0000000075eb41bf>] vfs_write+0x8f0/0xc80 Fixes: 37923ed6b8ce ("netdevsim: Add simple FIB resource controller via devlink") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-27netdevsim: fix memory leak in nsim_bus_dev_new()Zhengchao Shao
If device_register() failed in nsim_bus_dev_new(), the value of reference in nsim_bus_dev->dev is 1. obj->name in nsim_bus_dev->dev will not be released. unreferenced object 0xffff88810352c480 (size 16): comm "echo", pid 5691, jiffies 4294945921 (age 133.270s) hex dump (first 16 bytes): 6e 65 74 64 65 76 73 69 6d 31 00 00 00 00 00 00 netdevsim1...... backtrace: [<000000005e2e5e26>] __kmalloc_node_track_caller+0x3a/0xb0 [<0000000094ca4fc8>] kvasprintf+0xc3/0x160 [<00000000aad09bcc>] kvasprintf_const+0x55/0x180 [<000000009bac868d>] kobject_set_name_vargs+0x56/0x150 [<000000007c1a5d70>] dev_set_name+0xbb/0xf0 [<00000000ad0d126b>] device_add+0x1f8/0x1cb0 [<00000000c222ae24>] new_device_store+0x3b6/0x5e0 [<0000000043593421>] bus_attr_store+0x72/0xa0 [<00000000cbb1833a>] sysfs_kf_write+0x106/0x160 [<00000000d0dedb8a>] kernfs_fop_write_iter+0x3a8/0x5a0 [<00000000770b66e2>] vfs_write+0x8f0/0xc80 [<0000000078bb39be>] ksys_write+0x106/0x210 [<00000000005e55a4>] do_syscall_64+0x35/0x80 [<00000000eaa40bbc>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 Fixes: 40e4fe4ce115 ("netdevsim: move device registration and related code to bus.c") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20221026015405.128795-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-27Merge tag 'linux-can-fixes-for-6.1-20221027' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2022-10-27 Anssi Hannula fixes the use of the completions in the kvaser_usb driver. Biju Das contributes 2 patches for the rcar_canfd driver. A IRQ storm that can be triggered by high CAN bus load and channel specific IRQ handlers are fixed. Yang Yingliang fixes the j1939 transport protocol by moving a kfree_skb() out of a spin_lock_irqsave protected section. * tag 'linux-can-fixes-for-6.1-20221027' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: j1939: transport: j1939_session_skb_drop_old(): spin_unlock_irqrestore() before kfree_skb() can: rcar_canfd: fix channel specific IRQ handling for RZ/G2L can: rcar_canfd: rcar_canfd_handle_global_receive(): fix IRQ storm on global FIFO receive can: kvaser_usb: Fix possible completions during init_completion ==================== Link: https://lore.kernel.org/r/20221027114356.1939821-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-27net: broadcom: bcm4908_enet: update TX stats after actual transmissionRafał Miłecki
Queueing packets doesn't guarantee their transmission. Update TX stats after hardware confirms consuming submitted data. This also fixes a possible race and NULL dereference. bcm4908_enet_start_xmit() could try to access skb after freeing it in the bcm4908_enet_poll_tx(). Reported-by: Florian Fainelli <f.fainelli@gmail.com> Fixes: 4feffeadbcb2e ("net: broadcom: bcm4908enet: add BCM4908 controller driver") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20221027112430.8696-1-zajec5@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-27Merge branch 'ip-rework-the-fix-for-dflt-addr-selection-for-connected-nexthop'Jakub Kicinski
Nicolas Dichtel says: ==================== ip: rework the fix for dflt addr selection for connected nexthop" This series reworks the fix that is reverted in the second commit. As Julian explained, nhc_scope is related to nhc_gw, it's not the scope of the route. ==================== Link: https://lore.kernel.org/r/20221020100952.8748-1-nicolas.dichtel@6wind.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-27nh: fix scope used to find saddr when adding non gw nhNicolas Dichtel
As explained by Julian, fib_nh_scope is related to fib_nh_gw4, but fib_info_update_nhc_saddr() needs the scope of the route, which is the scope "before" fib_nh_scope, ie fib_nh_scope - 1. This patch fixes the problem described in commit 747c14307214 ("ip: fix dflt addr selection for connected nexthop"). Fixes: 597cfe4fc339 ("nexthop: Add support for IPv4 nexthops") Link: https://lore.kernel.org/netdev/6c8a44ba-c2d5-cdf-c5c7-5baf97cba38@ssi.bg/ Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-27Revert "ip: fix dflt addr selection for connected nexthop"Nicolas Dichtel
This reverts commit 747c14307214b55dbd8250e1ab44cad8305756f1. As explained by Julian, nhc_scope is related to nhc_gw, not to the route. Revert the original patch. The initial problem is fixed differently in the next commit. Link: https://lore.kernel.org/netdev/6c8a44ba-c2d5-cdf-c5c7-5baf97cba38@ssi.bg/ Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-27Revert "ip: fix triggering of 'icmp redirect'"Nicolas Dichtel
This reverts commit eb55dc09b5dd040232d5de32812cc83001a23da6. The patch that introduces this bug is reverted right after this one. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-27io_uring: unlock if __io_run_local_work locked insideDylan Yudaken
It is possible for tw to lock the ring, and this was not propogated out to io_run_local_work. This can cause an unlock to be missed. Instead pass a pointer to locked into __io_run_local_work. Fixes: 8ac5d85a89b4 ("io_uring: add local task_work run helper that is entered locked") Signed-off-by: Dylan Yudaken <dylany@meta.com> Link: https://lore.kernel.org/r/20221027144429.3971400-3-dylany@meta.com [axboe: WARN_ON() -> WARN_ON_ONCE() and add a minor comment] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-27io_uring: use io_run_local_work_locked helperDylan Yudaken
prefer to use io_run_local_work_locked helper for consistency Signed-off-by: Dylan Yudaken <dylany@meta.com> Link: https://lore.kernel.org/r/20221027144429.3971400-2-dylany@meta.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-27genetlink: limit the use of validation workarounds to old opsJakub Kicinski
During review of previous change another thing came up - we should limit the use of validation workarounds to old commands. Don't list the workarounds one by one, as we're rejecting all existing ones. We can deal with the masking in the unlikely event that new flag is added. Link: https://lore.kernel.org/all/6ba9f727e555fd376623a298d5d305ad408c3d47.camel@sipsolutions.net/ Link: https://lore.kernel.org/r/20221026001524.1892202-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-10-27net: bcmsysport: Indicate MAC is in charge of PHY PMFlorian Fainelli
Avoid the PHY library call unnecessarily into the suspend/resume functions by setting phydev->mac_managed_pm to true. The SYSTEMPORT driver essentially does exactly what mdio_bus_phy_resume() does by calling phy_resume(). Fixes: fba863b81604 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20221025234201.2549360-1-f.fainelli@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-10-27Merge tag 'nvme-6.1-2022-10-27' of git://git.infradead.org/nvme into block-6.1Jens Axboe
Pull NVMe fixes from Christoph: "nvme fixes for Linux 6.1 - make the multipath dma alignment to match the non-multipath one (Keith Busch) - fix a bogus use of sg_init_marker() (Nam Cao) - fix circulr locking in nvme-tcp (Sagi Grimberg)" * tag 'nvme-6.1-2022-10-27' of git://git.infradead.org/nvme: nvme-multipath: set queue dma alignment to 3 nvme-tcp: fix possible circular locking when deleting a controller under memory pressure nvme-tcp: replace sg_init_marker() with sg_init_table()
2022-10-27blk-mq: don't add non-pt request with ->end_io to batchMing Lei
dm-rq implements ->end_io callback for request issued to underlying queue, and it isn't passthrough request. Commit ab3e1d3bbab9 ("block: allow end_io based requests in the completion batch handling") doesn't clear rq->bio and rq->__data_len for request with ->end_io in blk_mq_end_request_batch(), and this way is actually dangerous, but so far it is only for nvme passthrough request. dm-rq needs to clean up remained bios in case of partial completion, and req->bio is required, then use-after-free is triggered, so the underlying clone request can't be completed in blk_mq_end_request_batch. Fix panic by not adding such request into batch list, and the issue can be triggered simply by exposing nvme pci to dm-mpath simply. Fixes: ab3e1d3bbab9 ("block: allow end_io based requests in the completion batch handling") Cc: dm-devel@redhat.com Cc: Mike Snitzer <snitzer@kernel.org> Reported-by: Changhui Zhong <czhong@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20221027085709.513175-1-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-27rbd: fix possible memory leak in rbd_sysfs_init()Yang Yingliang
If device_register() returns error in rbd_sysfs_init(), name of kobject which is allocated in dev_set_name() called in device_add() is leaked. As comment of device_add() says, it should call put_device() to drop the reference count that was set in device_initialize() when it fails, so the name can be freed in kobject_cleanup(). Fault injection test can trigger this problem: unreferenced object 0xffff88810173aa78 (size 8): comm "modprobe", pid 247, jiffies 4294714278 (age 31.789s) hex dump (first 8 bytes): 72 62 64 00 81 88 ff ff rbd..... backtrace: [<00000000f58fae56>] __kmalloc_node_track_caller+0x44/0x1b0 [<00000000bdd44fe7>] kstrdup+0x3a/0x70 [<00000000f7844d0b>] kstrdup_const+0x63/0x80 [<000000001b0a0eeb>] kvasprintf_const+0x10b/0x190 [<00000000a47bd894>] kobject_set_name_vargs+0x56/0x150 [<00000000d5edbf18>] dev_set_name+0xab/0xe0 [<00000000f5153e80>] device_add+0x106/0x1f20 Fixes: dfc5606dc513 ("rbd: replace the rbd sysfs interface") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20221027091918.2294132-1-yangyingliang@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-10-27can: j1939: transport: j1939_session_skb_drop_old(): ↵Yang Yingliang
spin_unlock_irqrestore() before kfree_skb() It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. The skb is unlinked from the queue, so it can be freed after spin_unlock_irqrestore(). Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/all/20221027091237.2290111-1-yangyingliang@huawei.com Cc: stable@vger.kernel.org [mkl: adjust subject] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-27net: ehea: fix possible memory leak in ehea_register_port()Yang Yingliang
If of_device_register() returns error, the of node and the name allocated in dev_set_name() is leaked, call put_device() to give up the reference that was set in device_initialize(), so that of node is put in logical_port_release() and the name is freed in kobject_cleanup(). Fixes: 1acf2318dd13 ("ehea: dynamic add / remove port") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221025130011.1071357-1-yangyingliang@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-10-27Merge branch 'openvswitch-syzbot-splat-fix-and-introduce-selftest'Paolo Abeni
Aaron Conole says: ==================== openvswitch: syzbot splat fix and introduce selftest Syzbot recently caught a splat when dropping features from openvswitch datapaths that are in-use. The WARN() call is definitely too large a hammer for the situation, so change to pr_warn. Second patch in the series introduces a new selftest suite which can help show that an issue is fixed. This change might be more suited to net-next tree, so it has been separated out as an additional patch and can be either applied to either tree based on preference. ==================== Link: https://lore.kernel.org/r/20221025105018.466157-1-aconole@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-10-27selftests: add openvswitch selftest suiteAaron Conole
Previous commit resolves a WARN splat that can be difficult to reproduce, but with the ovs-dpctl.py utility, it can be trivial. Introduce a test case which creates a DP, and then downgrades the feature set. This will include a utility 'ovs-dpctl.py' that can be extended to do additional tests and diagnostics. Signed-off-by: Aaron Conole <aconole@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-10-27openvswitch: switch from WARN to pr_warnAaron Conole
As noted by Paolo Abeni, pr_warn doesn't generate any splat and can still preserve the warning to the user that feature downgrade occurred. We likely cannot introduce other kinds of checks / enforcement here because syzbot can generate different genl versions to the datapath. Reported-by: syzbot+31cde0bef4bbf8ba2d86@syzkaller.appspotmail.com Fixes: 44da5ae5fbea ("openvswitch: Drop user features if old user space attempted to create datapath") Cc: Thomas Graf <tgraf@suug.ch> Signed-off-by: Aaron Conole <aconole@redhat.com> Acked-by: Ilya Maximets <i.maximets@ovn.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-10-27perf/mem: Rename PERF_MEM_LVLNUM_EXTN_MEM to PERF_MEM_LVLNUM_CXLRavi Bangoria
PERF_MEM_LVLNUM_EXTN_MEM was introduced to cover CXL devices but it's bit ambiguous name and also not generic enough to cover cxl.cache and cxl.io devices. Rename it to PERF_MEM_LVLNUM_CXL to be more specific. Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/f6268268-b4e9-9ed6-0453-65792644d953@amd.com
2022-10-27perf/x86/rapl: Add support for Intel Raptor LakeZhang Rui
Raptor Lake RAPL support is the same as previous Sky Lake. Add Raptor Lake model for RAPL. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Wang Wendy <wendy.wang@intel.com> Link: https://lkml.kernel.org/r/20221023125120.2727-2-rui.zhang@intel.com
2022-10-27perf/x86/rapl: Add support for Intel AlderLake-NZhang Rui
AlderLake-N RAPL support is the same as previous Sky Lake. Add AlderLake-N model for RAPL. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Wang Wendy <wendy.wang@intel.com> Link: https://lkml.kernel.org/r/20221023125120.2727-1-rui.zhang@intel.com
2022-10-27perf: Fix missing raw data on tracepoint eventsJames Clark
Since commit 838d9bb62d13 ("perf: Use sample_flags for raw_data") raw data is not being output on tracepoints due to the PERF_SAMPLE_RAW field not being set. Fix this by setting it for tracepoint events. This fixes the following test failure: perf test "sched_switch" -vvv 35: Track with sched_switch --- start --- test child forked, pid 1828 ... Using CPUID 0x00000000410fd400 sched_switch: cpu: 2 prev_tid -14687 next_tid 0 sched_switch: cpu: 2 prev_tid -14687 next_tid 0 Missing sched_switch events 4613 events recorded test child finished with -1 ---- end ---- Track with sched_switch: FAILED! Fixes: 838d9bb62d13 ("perf: Use sample_flags for raw_data") Signed-off-by: James Clark <james.clark@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Tested-by: SeongJae Park <sj@kernel.org> Tested-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Link: https://lore.kernel.org/r/20221012143857.48198-1-james.clark@arm.com
2022-10-27Merge patch series "R-Car CAN-FD fixes"Marc Kleine-Budde
Biju Das <biju.das.jz@bp.renesas.com> says: This patch series fixes the below issues in R-Car CAN-FD driver. 1) Race condition in CAN driver under heavy CAN load condition with both channels enabled results in IRQ storm on global FIFO receive IRQ line. 2) Add channel specific TX interrupts handling for RZ/G2L SoC as it has separate IRQ lines for each TX. changes since v1: https://lore.kernel.org/all/20221022081503.1051257-1-biju.das.jz@bp.renesas.com * Added check for IRQ active and enabled before handling the IRQ on a particular channel. Link: https://lore.kernel.org/all/20221025155657.1426948-1-biju.das.jz@bp.renesas.com [mkl: adjust message, add link, take only patches 1 + 2, upstream 3 via can-next] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-27can: rcar_canfd: fix channel specific IRQ handling for RZ/G2LBiju Das
RZ/G2L has separate channel specific IRQs for transmit and error interrupts. But the IRQ handler processes both channels, even if there no interrupt occurred on one of the channels. This patch fixes the issue by passing a channel specific context parameter instead of global one for the IRQ register and the IRQ handler, it just handles the channel which is triggered the interrupt. Fixes: 76e9353a80e9 ("can: rcar_canfd: Add support for RZ/G2L family") Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/all/20221025155657.1426948-3-biju.das.jz@bp.renesas.com Cc: stable@vger.kernel.org [mkl: adjust commit message] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-27can: rcar_canfd: rcar_canfd_handle_global_receive(): fix IRQ storm on global ↵Biju Das
FIFO receive We are seeing an IRQ storm on the global receive IRQ line under heavy CAN bus load conditions with both CAN channels enabled. Conditions: The global receive IRQ line is shared between can0 and can1, either of the channels can trigger interrupt while the other channel's IRQ line is disabled (RFIE). When global a receive IRQ interrupt occurs, we mask the interrupt in the IRQ handler. Clearing and unmasking of the interrupt is happening in rx_poll(). There is a race condition where rx_poll() unmasks the interrupt, but the next IRQ handler does not mask the IRQ due to NAPIF_STATE_MISSED flag (e.g.: can0 RX FIFO interrupt is disabled and can1 is triggering RX interrupt, the delay in rx_poll() processing results in setting NAPIF_STATE_MISSED flag) leading to an IRQ storm. This patch fixes the issue by checking IRQ active and enabled before handling the IRQ on a particular channel. Fixes: dd3bd23eb438 ("can: rcar_canfd: Add Renesas R-Car CAN FD driver") Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/all/20221025155657.1426948-2-biju.das.jz@bp.renesas.com Cc: stable@vger.kernel.org [mkl: adjust commit message] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-27fbdev/core: Avoid uninitialized read in aperture_remove_conflicting_pci_device()Michał Mirosław
Return on error directly from the BAR-iterating loop instead of break+return. This is actually a cosmetic fix, since it would be highly unusual to have this called for a PCI device without any memory BARs. Fixes: 9d69ef183815 ("fbdev/core: Remove remove_conflicting_pci_framebuffers()") Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/e75323732bedc46d613d72ecb40f97e3bc75eea8.1666829073.git.mirq-linux@rere.qmqm.pl
2022-10-27Merge tag 'amd-drm-fixes-6.1-2022-10-26-1' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.1-2022-10-26-1: amdgpu: - Stable pstate fix - SMU 13.x updates - SR-IOV fixes - PCI AER fix - GC 11.x fixes - Display fixes - Expose IMU firmware version for debugging - Plane modifier fix - S0i3 fix amdkfd: - Fix possible memory leak - Fix GC 10.x cache info reporting UAPI: - Expose IMU firmware version via existing INFO firmware query Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221027024101.6881-1-alexander.deucher@amd.com
2022-10-27can: kvaser_usb: Fix possible completions during init_completionAnssi Hannula
kvaser_usb uses completions to signal when a response event is received for outgoing commands. However, it uses init_completion() to reinitialize the start_comp and stop_comp completions before sending the start/stop commands. In case the device sends the corresponding response just before the actual command is sent, complete() may be called concurrently with init_completion() which is not safe. This might be triggerable even with a properly functioning device by stopping the interface (CMD_STOP_CHIP) just after it goes bus-off (which also causes the driver to send CMD_STOP_CHIP when restart-ms is off), but that was not tested. Fix the issue by using reinit_completion() instead. Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010185237.319219-2-extja@kvaser.com Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-10-27ALSA: aoa: Fix I2S device accountingTakashi Iwai
i2sbus_add_dev() is supposed to return the number of probed devices, i.e. either 1 or 0. However, i2sbus_add_dev() has one error handling that returns -ENODEV; this will screw up the accumulation number counted in the caller, i2sbus_probe(). Fix the return value to 0 and add the comment for better understanding for readers. Fixes: f3d9478b2ce4 ("[ALSA] snd-aoa: add snd-aoa") Link: https://lore.kernel.org/r/20221027065233.13292-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-10-27ALSA: Use del_timer_sync() before freeing timerSteven Rostedt (Google)
The current code for freeing the emux timer is extremely dangerous: CPU0 CPU1 ---- ---- snd_emux_timer_callback() snd_emux_free() spin_lock(&emu->voice_lock) del_timer(&emu->tlist); <-- returns immediately spin_unlock(&emu->voice_lock); [..] kfree(emu); spin_lock(&emu->voice_lock); [BOOM!] Instead just use del_timer_sync() which will wait for the timer to finish before continuing. No need to check if the timer is active or not when doing so. This doesn't fix the race of a possible re-arming of the timer, but at least it won't use the data that has just been freed. [ Fixed unused variable warning by tiwai ] Cc: stable@vger.kernel.org Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20221026231236.6834b551@gandalf.local.home Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-10-27ALSA: aoa: i2sbus: fix possible memory leak in i2sbus_add_dev()Yang Yingliang
dev_set_name() in soundbus_add_one() allocates memory for name, it need be freed when of_device_register() fails, call soundbus_dev_put() to give up the reference that hold in device_initialize(), so that it can be freed in kobject_cleanup() when the refcount hit to 0. And other resources are also freed in i2sbus_release_dev(), so it can return 0 directly. Fixes: f3d9478b2ce4 ("[ALSA] snd-aoa: add snd-aoa") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221027013438.991920-1-yangyingliang@huawei.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-10-27Merge tag 'asoc-fix-v6.1-rc2' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.1 Quite a few fixes here, a lot driver specific, plus some new quirks. There was a bit of a mess with the runtime PM handling due to some confusion in the API there which resulted in a number of commits and reverts but that should all be stable now.
2022-10-27Merge tag 'drm-msm-fixes-2022-10-24' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/msm into drm-fixes msm-fixes for v6.1 - Fix shrinker deadlock - Fix crash during suspend after unbind - Fix IRQ lifetime issues - Fix potential memory corruption with too many bridges - Fix memory corruption on GPU state capture Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGveadezhqm=Sra7Jq4A3tFAp_eBmKKOoHLnapN03pVoLw@mail.gmail.com
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 21:21:13 +0000