| Age | Commit message (Collapse) | Author |
|---|
|
Current loop in cxl_endpoint_get_perf_coordinates() incorrectly assumes
the Root Port (RP) dport is the one with generic port access_coordinate.
However those coordinates are one level up in the Host Bridge (HB).
Current code causes the computation code to pick up 0s as the coordinates
and cause minimal bandwidth to result in 0.
Add check to skip RP when combining coordinates.
Fixes: 14a6960b3e92 ("cxl: Add helper function that calculate performance data for downstream ports")
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20240403154844.3403859-3-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Add INTC107B for Lunar Lake and INTC10CB for Arrow Lake ACPI devices IDs.
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Link: https://lore.kernel.org/r/20240405122630.32154-1-sumeet.r.pawnikar@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
If, for example, the power button is configured to suspend, holding it
and releasing it after the machine has suspended, will wake the machine.
Also on some machines, power button release events are sent during
hibernation, even if the button wasn't used to hibernate the machine.
This causes hibernation to be aborted.
Fixes: 0c4cae1bc00d ("PM: hibernate: Avoid missing wakeup events during hibernation")
Signed-off-by: David McFarland <corngood@gmail.com>
Tested-by: Enrik Berkhan <Enrik.Berkhan@inka.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/878r1tpd6u.fsf_-_@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The modes[] array contains pointers to modes on the connectors'
mode lists, which are protected by dev->mode_config.mutex.
Thus we need to extend modes[] the same protection or by the
time we use it the elements may already be pointing to
freed/reused memory.
Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10583
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404203336.10454-2-ville.syrjala@linux.intel.com
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Commit b2b32a173881 ("ACPI: bus: update acpi_dev_hid_uid_match() to
support multiple types") added _UID matching support for both integer
and string types, which satisfies NULL @uid2 argument for string types
using inversion, but this logic prevents _UID comparision in case the
argument is integer 0, which may result in false positives.
Fix this using _Generic(), which will allow NULL @uid2 argument for
string types as well as _UID matching for all possible integer values.
Fixes: b2b32a173881 ("ACPI: bus: update acpi_dev_hid_uid_match() to support multiple types")
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
[ rjw: Comment adjustment ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The host1x devices are virtual compound devices and do not perform DMA
accesses themselves, so they do not need to be set up for DMA.
Ideally we would also not need to set up DMA masks for the virtual
devices, but we currently still need those for legacy support on old
hardware.
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240314154943.2487549-1-thierry.reding@gmail.com
|
|
On the Toshiba Encore WT10-A tablet the BATC battery ACPI device depends
on 3 other devices:
Name (_DEP, Package (0x03) // _DEP: Dependencies
{
I2C1,
GPO2,
GPO0
})
acpi_scan_check_dep() adds all 3 of these to the acpi_dep_list and then
before an acpi_device is created for the BATC handle (and thus before
acpi_scan_dep_init() runs) acpi_scan_clear_dep() gets called for both
GPIO depenencies, with free_when_met not set for the dependencies.
Since there is no adev for BATC yet, there also is no dep_unmet to
decrement. The only result of acpi_scan_clear_dep() in this case is
dep->met getting set.
Soon after acpi_scan_clear_dep() has been called for the GPIO dependencies
the acpi_device gets created for the BATC handle and acpi_scan_dep_init()
runs, this sees 3 dependencies on the acpi_dep_list and initializes
unmet_dep to 3. Later when the dependency for I2C1 is met unmet_dep
becomes 2, but since the 2 GPIO deps where already met it never becomes 0
causing battery monitoring to not work.
Fix this by modifying acpi_scan_dep_init() to not increase dep_met for
dependencies which have already been marked as being met.
Fixes: 3ba12d8de3fa ("ACPI: scan: Reduce overhead related to devices with dependencies")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: 6.5+ <stable@vger.kernel.org> # 6.5+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The commit cited below broke the build for PREEMPT_RT because
rwsem_assert_held_write_nolockdep() passes a struct rw_semaphore but
rw_base_assert_held_write() expects struct rwbase_rt. Fixing the type alone
leads to the problem that WARN_ON() is not found because bug.h is missing.
In order to resolve this:
- Keep the assert (WARN_ON()) in rwsem.h (not rwbase_rt.h)
- Make rwsem_assert_held_write_nolockdep() do the implementation
specific (rw_base) writer check.
- Replace the "inline" with __always_inline which was used before.
Fixes: f70405afc99b1 ("locking: Add rwsem_assert_held() and rwsem_assert_held_write()")
Reported-by: Clark Williams <williams@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Waiman Long <longman@redhat.com>
Link: https://lore.kernel.org/r/20240319182050.U4AzUF3I@linutronix.de
|
|
When building with 'make W=1' but CONFIG_TRACE_IRQFLAGS=n, the
unused argument to lockdep_hrtimer_exit() causes a warning:
kernel/time/hrtimer.c:1655:14: error: variable 'expires_in_hardirq' set but not used [-Werror=unused-but-set-variable]
This is intentional behavior, so add a cast to void to shut up the warning.
Fixes: 73d20564e0dc ("hrtimer: Don't dereference the hrtimer pointer after the callback")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240408074609.3170807-1-arnd@kernel.org
Closes: https://lore.kernel.org/oe-kbuild-all/202311191229.55QXHVc6-lkp@intel.com/
|
|
Minda Chen says:
====================
Add missing mmc statistics in DW GMAC
Add miss MMC statistic in DW GMAC
base on 6.9-rc1
changed
v2:
patch2 : remove mmc_rx_control_g due to it is gotten in
ethtool_ops::get_eth_ctrl_stats.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The missing statistics including Rx_Receive_Error_Packets and
Tx_OSize_Packets_Good.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
XGMAC MMC has already added LPI statistics. GMAC MMC lack of these
statistics. Add register definition and reading the LPI statistics
from registers.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When done from a virtual machine, instructions that touch APIC memory
must be emulated. By convention, MMIO accesses are typically performed
via io.h helpers such as readl() or writeq() to simplify instruction
emulation/decoding (ex: in KVM hosts and SEV guests) [0].
Currently, native_apic_mem_read() does not follow this convention,
allowing the compiler to emit instructions other than the MOV
instruction generated by readl(). In particular, when the kernel is
compiled with clang and run as a SEV-ES or SEV-SNP guest, the compiler
would emit a TESTL instruction which is not supported by the SEV-ES
emulator, causing a boot failure in that environment. It is likely the
same problem would happen in a TDX guest as that uses the same
instruction emulator as SEV-ES.
To make sure all emulators can emulate APIC memory reads via MOV, use
the readl() function in native_apic_mem_read(). It is expected that any
emulator would support MOV in any addressing mode as it is the most
generic and is what is usually emitted currently.
The TESTL instruction is emitted when native_apic_mem_read() is inlined
into apic_mem_wait_icr_idle(). The emulator comes from
insn_decode_mmio() in arch/x86/lib/insn-eval.c. It's not worth it to
extend insn_decode_mmio() to support more instructions since, in theory,
the compiler could choose to output nearly any instruction for such
reads which would bloat the emulator beyond reason.
[0] https://lore.kernel.org/all/20220405232939.73860-12-kirill.shutemov@linux.intel.com/
[ bp: Massage commit message, fix typos. ]
Signed-off-by: Adam Dunlap <acdunlap@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Kevin Loughlin <kevinloughlin@google.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240318230927.2191933-1-acdunlap@google.com
|
|
s2idle works like a regular suspend with freezing processes and freezing
devices. All CPUs except the control CPU go into idle. Once this is
completed the control CPU kicks all other CPUs out of idle, so that they
reenter the idle loop and then enter s2idle state. The control CPU then
issues an swait() on the suspend state and therefore enters the idle loop
as well.
Due to being kicked out of idle, the other CPUs leave their NOHZ states,
which means the tick is active and the corresponding hrtimer is programmed
to the next jiffie.
On entering s2idle the CPUs shut down their local clockevent device to
prevent wakeups. The last CPU which enters s2idle shuts down its local
clockevent and freezes timekeeping.
On resume, one of the CPUs receives the wakeup interrupt, unfreezes
timekeeping and its local clockevent and starts the resume process. At that
point all other CPUs are still in s2idle with their clockevents switched
off. They only resume when they are kicked by another CPU or after resuming
devices and then receiving a device interrupt.
That means there is no guarantee that all CPUs will wakeup directly on
resume. As a consequence there is no guarantee that timers which are queued
on those CPUs and should expire directly after resume, are handled. Also
timer list timers which are remotely queued to one of those CPUs after
resume will not result in a reprogramming IPI as the tick is
active. Queueing a hrtimer will also not result in a reprogramming IPI
because the first hrtimer event is already in the past.
The recent introduction of the timer pull model (7ee988770326 ("timers:
Implement the hierarchical pull model")) amplifies this problem, if the
current migrator is one of the non woken up CPUs. When a non pinned timer
list timer is queued and the queuing CPU goes idle, it relies on the still
suspended migrator CPU to expire the timer which will happen by chance.
The problem exists since commit 8d89835b0467 ("PM: suspend: Do not pause
cpuidle in the suspend-to-idle path"). There the cpuidle_pause() call which
in turn invoked a wakeup for all idle CPUs was moved to a later point in
the resume process. This might not be reached or reached very late because
it waits on a timer of a still suspended CPU.
Address this by kicking all CPUs out of idle after the control CPU returns
from swait() so that they resume their timers and restore consistent system
state.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218641
Fixes: 8d89835b0467 ("PM: suspend: Do not pause cpuidle in the suspend-to-idle path")
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: 5.16+ <stable@kernel.org> # 5.16+
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Michael Chan says:
====================
bnxt_en: Bug fixes
The first 2 patches fix 2 potential issues in the aux bus initialization
and error recovery paths. The 3rd patch fixes a potential PTP TX
timestamp issue during error recovery.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is possible that during error recovery and firmware reset,
there is a pending TX PTP packet waiting for the timestamp.
We need to reset this condition so that after recovery, the
tx_avail count for PTP is reset back to the initial value.
Otherwise, we may not accept any PTP TX timestamps after
recovery.
Fixes: 118612d519d8 ("bnxt_en: Add PTP clock APIs, ioctls, and ethtool methods")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since runtime MSIXs vector allocation/free has been removed,
the L2 driver needs to repopulate the MSIX entries for the
ulp client as the irq table may change during the recovery
process.
Fixes: 303432211324 ("bnxt_en: Remove runtime interrupt vector allocation")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If ulp = kzalloc() fails, the allocated edev will leak because it is
not properly assigned and the cleanup path will not be able to free it.
Fix it by assigning it properly immediately after allocation.
Fixes: 303432211324 ("bnxt_en: Remove runtime interrupt vector allocation")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add Acer Predator PH18-71 to acer_quirks with predator_v4
to support mode button and fan speed sensor.
Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240329152800.29393-1-bero@baylibre.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Since [1], dma_alloc_coherent() does not accept requests for GFP_COMP
anymore, even on archs that may be able to fulfill this. Functionality that
relied on the receive buffer being a compound page broke at that point:
The SMC-D protocol, that utilizes the ism device driver, passes receive
buffers to the splice processor in a struct splice_pipe_desc with a
single entry list of struct pages. As the buffer is no longer a compound
page, the splice processor now rejects requests to handle more than a
page worth of data.
Replace dma_alloc_coherent() and allocate a buffer with folio_alloc and
create a DMA map for it with dma_map_page(). Since only receive buffers
on ISM devices use DMA, qualify the mapping as FROM_DEVICE.
Since ISM devices are available on arch s390, only and on that arch all
DMA is coherent, there is no need to introduce and export some kind of
dma_sync_to_cpu() method to be called by the SMC-D protocol layer.
Analogously, replace dma_free_coherent by a two step dma_unmap_page,
then folio_put to free the receive buffer.
[1] https://lore.kernel.org/all/20221113163535.884299-1-hch@lst.de/
Fixes: c08004eede4b ("s390/ism: don't pass bogus GFP_ flags to dma_alloc_coherent")
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot is able to trigger an uninit-value in geneve_xmit() [1]
Problem : While most ip tunnel helpers (like ip_tunnel_get_dsfield())
uses skb_protocol(skb, true), pskb_inet_may_pull() is only using
skb->protocol.
If anything else than ETH_P_IPV6 or ETH_P_IP is found in skb->protocol,
pskb_inet_may_pull() does nothing at all.
If a vlan tag was provided by the caller (af_packet in the syzbot case),
the network header might not point to the correct location, and skb
linear part could be smaller than expected.
Add skb_vlan_inet_prepare() to perform a complete mac validation.
Use this in geneve for the moment, I suspect we need to adopt this
more broadly.
v4 - Jakub reported v3 broke l2_tos_ttl_inherit.sh selftest
- Only call __vlan_get_protocol() for vlan types.
Link: https://lore.kernel.org/netdev/20240404100035.3270a7d5@kernel.org/
v2,v3 - Addressed Sabrina comments on v1 and v2
Link: https://lore.kernel.org/netdev/Zg1l9L2BNoZWZDZG@hog/
[1]
BUG: KMSAN: uninit-value in geneve_xmit_skb drivers/net/geneve.c:910 [inline]
BUG: KMSAN: uninit-value in geneve_xmit+0x302d/0x5420 drivers/net/geneve.c:1030
geneve_xmit_skb drivers/net/geneve.c:910 [inline]
geneve_xmit+0x302d/0x5420 drivers/net/geneve.c:1030
__netdev_start_xmit include/linux/netdevice.h:4903 [inline]
netdev_start_xmit include/linux/netdevice.h:4917 [inline]
xmit_one net/core/dev.c:3531 [inline]
dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3547
__dev_queue_xmit+0x348d/0x52c0 net/core/dev.c:4335
dev_queue_xmit include/linux/netdevice.h:3091 [inline]
packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3081 [inline]
packet_sendmsg+0x8bb0/0x9ef0 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:745
__sys_sendto+0x685/0x830 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x125/0x1d0 net/socket.c:2199
do_syscall_64+0xd5/0x1f0
entry_SYSCALL_64_after_hwframe+0x6d/0x75
Uninit was created at:
slab_post_alloc_hook mm/slub.c:3804 [inline]
slab_alloc_node mm/slub.c:3845 [inline]
kmem_cache_alloc_node+0x613/0xc50 mm/slub.c:3888
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:577
__alloc_skb+0x35b/0x7a0 net/core/skbuff.c:668
alloc_skb include/linux/skbuff.h:1318 [inline]
alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6504
sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2795
packet_alloc_skb net/packet/af_packet.c:2930 [inline]
packet_snd net/packet/af_packet.c:3024 [inline]
packet_sendmsg+0x722d/0x9ef0 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:745
__sys_sendto+0x685/0x830 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x125/0x1d0 net/socket.c:2199
do_syscall_64+0xd5/0x1f0
entry_SYSCALL_64_after_hwframe+0x6d/0x75
CPU: 0 PID: 5033 Comm: syz-executor346 Not tainted 6.9.0-rc1-syzkaller-00005-g928a87efa423 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024
Fixes: d13f048dd40e ("net: geneve: modify IP header check in geneve6_xmit_skb and geneve_xmit_skb")
Reported-by: syzbot+9ee20ec1de7b3168db09@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/000000000000d19c3a06152f9ee4@google.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When sending a patch to (among others) Li Yang the nxp MTA replied that
the address doesn't exist and so the mail couldn't be delivered. The
error code was 550, so at least technically that's not a temporal issue.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here is a batman-adv bugfix:
- void infinite loop trying to resize local TT, by Sven Eckelmann
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When CONFIG_NET is disabled, an extra warning shows up for this
unused variable:
lib/checksum_kunit.c:218:18: error: 'expected_csum_ipv6_magic' defined but not used [-Werror=unused-const-variable=]
Replace the #ifdef with an IS_ENABLED() check that makes the compiler's
dead-code-elimination take care of the link failure.
Fixes: f24a70106dc1 ("lib: checksum: Fix build with CONFIG_NET=n")
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ivpu_device->context_xa is locked both in kernel thread and IRQ context.
It requires XA_FLAGS_LOCK_IRQ flag to be passed during initialization
otherwise the lock could be acquired from a thread and interrupted by
an IRQ that locks it for the second time causing the deadlock.
This deadlock was reported by lockdep and observed in internal tests.
Fixes: 35b137630f08 ("accel/ivpu: Introduce a new DRM driver for Intel VPU")
Cc: <stable@vger.kernel.org> # v6.3+
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-9-jacek.lawrynowicz@linux.intel.com
|
|
Change "VPU" to "NPU" in ivpu_suspend() so it matches all other error
messages.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-8-jacek.lawrynowicz@linux.intel.com
|
|
DRM_IVPU_PARAM_CORE_CLOCK_RATE returns current NPU frequency which
could be 0 if device was sleeping. This value isn't really useful to
the user space, so return max freq instead which can be used to estimate
NPU performance.
Fixes: c39dc15191c4 ("accel/ivpu: Read clock rate only if device is up")
Cc: <stable@vger.kernel.org> # v6.7
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-7-jacek.lawrynowicz@linux.intel.com
|
|
This patch improves readability and clarity of MMU error messages.
Previously, the error strings were somewhat confusing and could lead to
ambiguous interpretations, making it difficult to diagnose issues.
Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-6-jacek.lawrynowicz@linux.intel.com
|
|
Put NPU in D3hot after ivpu_resume() fails to power up the device.
This will assure that D3->D0 power cycle will be performed before
the next resume and also will minimize power usage in this corner case.
Fixes: 28083ff18d3f ("accel/ivpu: Fix DevTLB errors on suspend/resume and recovery")
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-5-jacek.lawrynowicz@linux.intel.com
|
|
In case of failed power up we end up left in PCI D3hot
state making it impossible to access NPU registers on retry.
Enter D0 state on retry before proceeding with power up sequence.
Fixes: 28083ff18d3f ("accel/ivpu: Fix DevTLB errors on suspend/resume and recovery")
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-4-jacek.lawrynowicz@linux.intel.com
|
|
Always enter D3hot after entering D0i3 an all platforms.
This minimizes power usage.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-3-jacek.lawrynowicz@linux.intel.com
|
|
Return value of drmm_mutex_init(ipc->lock) was unchecked.
Fixes: 5d7422cfb498 ("accel/ivpu: Add IPC driver and JSM messages")
Cc: <stable@vger.kernel.org> # v6.3+
Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240402104929.941186-2-jacek.lawrynowicz@linux.intel.com
|
|
Guest moved avail idx not used idx when we need to print log if
'(vq->avail_idx - last_avail_idx) > vq->num', so fix it.
Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Message-Id: <20240311082109.46773-1-xianting.tian@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
VDPA_GET_VRING_SIZE by mistake uses the already occupied
ioctl # 0x80 and we never noticed - it happens to work
because the direction and size are different, but confuses
tools such as perf which like to look at just the number,
and breaks the extra robustness of the ioctl numbering macros.
To fix, sort the entries and renumber the ioctl - not too late
since it wasn't in any released kernels yet.
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Reported-by: Namhyung Kim <namhyung@kernel.org>
Fixes: 1496c47065f9 ("vhost-vdpa: uapi to support reporting per vq size")
Cc: "Zhu Lingshan" <lingshan.zhu@intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <41c1c5489688abe5bfef9f7cf15584e3fb872ac5.1712092759.git.mst@redhat.com>
Reviewed-by: Eugenio Pérez <eperezma@redhat.com>
Reviewed-by: Zhu Lingshan <lingshan.zhu@intel.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
Modules registering driver with register_virtio_driver() might forget to
set .owner field. i2c-virtio.c for example has it missing. The field
is used by some other kernel parts for reference counting
(try_module_get()), so it is expected that drivers will set it.
Solve the problem by moving this task away from the drivers to the core
virtio code, just like we did for platform_driver in
commit 9447057eaff8 ("platform_device: use a macro instead of
platform_driver_register").
Fixes: 3cfc88380413 ("i2c: virtio: add a virtio i2c frontend driver")
Cc: "Jie Deng" <jie.deng@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Message-Id: <20240331-module-owner-virtio-v2-1-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
A smp_rmb() has been missed in vhost_enable_notify(), inspired by
Will. Otherwise, it's not ensured the available ring entries pushed
by guest can be observed by vhost in time, leading to stale available
ring entries fetched by vhost in vhost_get_vq_desc(), as reported by
Yihuang Yu on NVidia's grace-hopper (ARM64) platform.
/home/gavin/sandbox/qemu.main/build/qemu-system-aarch64 \
-accel kvm -machine virt,gic-version=host -cpu host \
-smp maxcpus=1,cpus=1,sockets=1,clusters=1,cores=1,threads=1 \
-m 4096M,slots=16,maxmem=64G \
-object memory-backend-ram,id=mem0,size=4096M \
: \
-netdev tap,id=vnet0,vhost=true \
-device virtio-net-pci,bus=pcie.8,netdev=vnet0,mac=52:54:00:f1:26:b0
:
guest# netperf -H 10.26.1.81 -l 60 -C -c -t UDP_STREAM
virtio_net virtio0: output.0:id 100 is not a head!
Add the missed smp_rmb() in vhost_enable_notify(). When it returns true,
it means there's still pending tx buffers. Since it might read indices,
so it still can bypass the smp_rmb() in vhost_get_vq_desc(). Note that
it should be safe until vq->avail_idx is changed by commit d3bb267bbdcb
("vhost: cache avail index in vhost_enable_notify()").
Fixes: d3bb267bbdcb ("vhost: cache avail index in vhost_enable_notify()")
Cc: <stable@kernel.org> # v5.18+
Reported-by: Yihuang Yu <yihyu@redhat.com>
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20240328002149.1141302-3-gshan@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
|
|
A smp_rmb() has been missed in vhost_vq_avail_empty(), spotted by
Will. Otherwise, it's not ensured the available ring entries pushed
by guest can be observed by vhost in time, leading to stale available
ring entries fetched by vhost in vhost_get_vq_desc(), as reported by
Yihuang Yu on NVidia's grace-hopper (ARM64) platform.
/home/gavin/sandbox/qemu.main/build/qemu-system-aarch64 \
-accel kvm -machine virt,gic-version=host -cpu host \
-smp maxcpus=1,cpus=1,sockets=1,clusters=1,cores=1,threads=1 \
-m 4096M,slots=16,maxmem=64G \
-object memory-backend-ram,id=mem0,size=4096M \
: \
-netdev tap,id=vnet0,vhost=true \
-device virtio-net-pci,bus=pcie.8,netdev=vnet0,mac=52:54:00:f1:26:b0
:
guest# netperf -H 10.26.1.81 -l 60 -C -c -t UDP_STREAM
virtio_net virtio0: output.0:id 100 is not a head!
Add the missed smp_rmb() in vhost_vq_avail_empty(). When tx_can_batch()
returns true, it means there's still pending tx buffers. Since it might
read indices, so it still can bypass the smp_rmb() in vhost_get_vq_desc().
Note that it should be safe until vq->avail_idx is changed by commit
275bf960ac697 ("vhost: better detection of available buffers").
Fixes: 275bf960ac69 ("vhost: better detection of available buffers")
Cc: <stable@kernel.org> # v4.11+
Reported-by: Yihuang Yu <yihyu@redhat.com>
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20240328002149.1141302-2-gshan@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
|
|
When one stacking device is over one device with virt_boundary_mask and
another one with max segment size, the stacking device have both limits
set. This way is allowed before d690cb8ae14b ("block: add an API to
atomically update queue limits").
Relax the limit so that we won't break such kind of stacking setting.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218687
Reported-by: janpieter.sollie@edpnet.be
Fixes: d690cb8ae14b ("block: add an API to atomically update queue limits")
Link: https://lore.kernel.org/linux-block/ZfGl8HzUpiOxCLm3@fedora/
Cc: Christoph Hellwig <hch@lst.de>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: dm-devel@lists.linux.dev
Cc: Song Liu <song@kernel.org>
Cc: linux-raid@vger.kernel.org
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Link: https://lore.kernel.org/r/20240407131931.4055231-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Multiple gendisk instances can allocated/added for single request queue
in case of disk rebind. blkg may still stay in q->blkg_list when calling
blkcg_init_disk() for rebind, then q->blkg_list becomes corrupted.
Fix the list corruption issue by:
- add blkg_init_queue() to initialize q->blkg_list & q->blkcg_mutex only
- move calling blkg_init_queue() into blk_alloc_queue()
The list corruption should be started since commit f1c006f1c685 ("blk-cgroup:
synchronize pd_free_fn() from blkg_free_workfn() and blkcg_deactivate_policy()")
which delays removing blkg from q->blkg_list into blkg_free_workfn().
Fixes: f1c006f1c685 ("blk-cgroup: synchronize pd_free_fn() from blkg_free_workfn() and blkcg_deactivate_policy()")
Fixes: 1059699f87eb ("block: move blkcg initialization/destroy into disk allocation/release handler")
Cc: Yu Kuai <yukuai3@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240407125910.4053377-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
bch2_acl_from_disk() uses allocate_dropping_locks, and can thus return
a transaction restart - this wasn't handled.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
|
|
When allocating bkey_cached from bc->freed_pcpu list, it missed
decreasing the count of nr_freed_pcpu which would cause the mismatch
between the value of nr_freed_pcpu and the list items. This problem
also exists in moving new bkey_cached to bc->freed_pcpu list.
If these happened, the bug info may appear in
bch2_fs_btree_key_cache_exit by the follow code:
BUG_ON(list_count_nodes(&bc->freed_pcpu) != bc->nr_freed_pcpu);
BUG_ON(list_count_nodes(&bc->freed_nonpcpu) != bc->nr_freed_nonpcpu);
Fixes: c65c13f0eac6 ("bcachefs: Run btree key cache shrinker less aggressively")
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Fix MCE timer reinit locking
- Fix/improve CoCo guest random entropy pool init
- Fix SEV-SNP late disable bugs
- Fix false positive objtool build warning
- Fix header dependency bug
- Fix resctrl CPU offlining bug
* tag 'x86-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/retpoline: Add NOENDBR annotation to the SRSO dummy return thunk
x86/mce: Make sure to grab mce_sysfs_mutex in set_bank()
x86/CPU/AMD: Track SNP host status with cc_platform_*()
x86/cc: Add cc_platform_set/_clear() helpers
x86/kvm/Kconfig: Have KVM_AMD_SEV select ARCH_HAS_CC_PLATFORM
x86/coco: Require seeding RNG with RDRAND on CoCo systems
x86/numa/32: Include missing <asm/pgtable_areas.h>
x86/resctrl: Fix uninitialized memory read when last CPU of domain goes offline
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Ingo Molnar:
"Fix various timer bugs:
- Fix a timer migration bug that may result in missed events
- Fix timer migration group hierarchy event updates
- Fix a PowerPC64 build warning
- Fix a handful of DocBook annotation bugs"
* tag 'timers-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers/migration: Return early on deactivation
timers/migration: Fix ignored event due to missing CPU update
vdso: Use CONFIG_PAGE_SHIFT in vdso/datapage.h
timers: Fix text inconsistencies and spelling
tick/sched: Fix struct tick_sched doc warnings
tick/sched: Fix various kernel-doc warnings
timers: Fix kernel-doc format and add Return values
time/timekeeping: Fix kernel-doc warnings and typos
time/timecounter: Fix inline documentation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fix from Ingo Molnar:
"Fix a combined PEBS events bug on x86 Intel CPUs"
* tag 'perf-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/ds: Don't clear ->pebs_data_cfg for the last PEBS event
|
|
Inorder to support shaping and scheduling, Upon class creation
Netdev driver allocates trasmit schedulers.
The previous patch which added support for Round robin scheduling has
a bug due to which driver is not freeing transmit schedulers post
class deletion.
This patch fixes the same.
Fixes: 47a9656f168a ("octeontx2-pf: htb offload support for Round Robin scheduling")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a bug when setting the RSS options in virtio_net that can break
the whole machine, getting the kernel into an infinite loop.
Running the following command in any QEMU virtual machine with virtionet
will reproduce this problem:
# ethtool -X eth0 hfunc toeplitz
This is how the problem happens:
1) ethtool_set_rxfh() calls virtnet_set_rxfh()
2) virtnet_set_rxfh() calls virtnet_commit_rss_command()
3) virtnet_commit_rss_command() populates 4 entries for the rss
scatter-gather
4) Since the command above does not have a key, then the last
scatter-gatter entry will be zeroed, since rss_key_size == 0.
sg_buf_size = vi->rss_key_size;
5) This buffer is passed to qemu, but qemu is not happy with a buffer
with zero length, and do the following in virtqueue_map_desc() (QEMU
function):
if (!sz) {
virtio_error(vdev, "virtio: zero sized buffers are not allowed");
6) virtio_error() (also QEMU function) set the device as broken
vdev->broken = true;
7) Qemu bails out, and do not repond this crazy kernel.
8) The kernel is waiting for the response to come back (function
virtnet_send_command())
9) The kernel is waiting doing the following :
while (!virtqueue_get_buf(vi->cvq, &tmp) &&
!virtqueue_is_broken(vi->cvq))
cpu_relax();
10) None of the following functions above is true, thus, the kernel
loops here forever. Keeping in mind that virtqueue_is_broken() does
not look at the qemu `vdev->broken`, so, it never realizes that the
vitio is broken at QEMU side.
Fix it by not sending RSS commands if the feature is not available in
the device.
Fixes: c7114b1249fa ("drivers/net/virtio_net: Added basic RSS support.")
Cc: stable@vger.kernel.org
Cc: qemu-devel@nongnu.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Multiple bug fixes for journal iters:
- When the journal keys gap buffer is resized, we have to adjust the
iterators for moving the gap to the end
- We don't want to rewind iterators to point to the key we just
inserted if it's not for the correct btree/level
Also, add some new assertions.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
The struct field swap can collide with the swap() macro defined in
linux/minmax.h. Rename the struct field to prevent such collisions.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Now that bcachefs docs exist in Documentation/filesystems/bcachefs/,
cover it in MAINTAINERS entry for the filesystem.
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
