summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-04-10tools/power/turbostat: Add support for new i915 sysfs knobsZhang Rui
On Meteorlake platform, i915 driver supports the traditional graphics sysfs knobs including /sys/class/drm/card0/power/rc6_residency_ms /sys/class/drm/card0/gt_cur_freq_mhz /sys/class/drm/card0/gt_act_freq_mhz At the same time, it also supports /sys/class/drm/card0/gt/gt0/rc6_residency_ms /sys/class/drm/card0/gt/gt0/rps_cur_freq_mhz /sys/class/drm/card0/gt/gt0/rps_act_freq_mhz /sys/class/drm/card0/gt/gt1/rc6_residency_ms /sys/class/drm/card0/gt/gt1/rps_cur_freq_mhz /sys/class/drm/card0/gt/gt1/rps_act_freq_mhz gt0 is for GFX and gt1 is for SA Media. Enhance turbostat to prefer the i915 new sysfs knobs. Export gt0 via BIC_GFX_rc6/BIC_GFXMHz/BIC_GFXACTMHz. Export gt1 via BIC_SMA_mc6/BIC_SMAMHz/BIC_SMAACTMHz. Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2024-04-10tools/power/turbostat: Introduce BIC_SAM_mc6/BIC_SAMMHz/BIC_SAMACTMHzZhang Rui
Graphics driver (i915/Xe) on mordern platforms splits GFX and SA Media information via different sysfs knobs. Existing BIC_GFX_rc6/BIC_GFXMHz/BIC_GFXACTMHz columns can be reused for GFX. Introduce BIC_SAM_mc6/BIC_SAMMHz/BIC_SAMACTMHz columns for SA Media. Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2024-04-10r8169: fix LED-related deadlock on module removalHeiner Kallweit
Binding devm_led_classdev_register() to the netdev is problematic because on module removal we get a RTNL-related deadlock. Fix this by avoiding the device-managed LED functions. Note: We can safely call led_classdev_unregister() for a LED even if registering it failed, because led_classdev_unregister() detects this and is a no-op in this case. Fixes: 18764b883e15 ("r8169: add support for LED's on RTL8168/RTL8101") Cc: stable@vger.kernel.org Reported-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-10timekeeping: Use READ/WRITE_ONCE() for tick_do_timer_cpuThomas Gleixner
tick_do_timer_cpu is used lockless to check which CPU needs to take care of the per tick timekeeping duty. This is done to avoid a thundering herd problem on jiffies_lock. The read and writes are not annotated so KCSAN complains about data races: BUG: KCSAN: data-race in tick_nohz_idle_stop_tick / tick_nohz_next_event write to 0xffffffff8a2bda30 of 4 bytes by task 0 on cpu 26: tick_nohz_idle_stop_tick+0x3b1/0x4a0 do_idle+0x1e3/0x250 read to 0xffffffff8a2bda30 of 4 bytes by task 0 on cpu 16: tick_nohz_next_event+0xe7/0x1e0 tick_nohz_get_sleep_length+0xa7/0xe0 menu_select+0x82/0xb90 cpuidle_select+0x44/0x60 do_idle+0x1c2/0x250 value changed: 0x0000001a -> 0xffffffff Annotate them with READ/WRITE_ONCE() to document the intentional data race. Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Tested-by: Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/87cyqy7rt3.ffs@tglx
2024-04-10pds_core: Fix pdsc_check_pci_health function to use work threadBrett Creeley
When the driver notices fw_status == 0xff it tries to perform a PCI reset on itself via pci_reset_function() in the context of the driver's health thread. However, pdsc_reset_prepare calls pdsc_stop_health_thread(), which attempts to stop/flush the health thread. This results in a deadlock because the stop/flush will never complete since the driver called pci_reset_function() from the health thread context. Fix by changing the pdsc_check_pci_health_function() to queue a newly introduced pdsc_pci_reset_thread() on the pdsc's work queue. Unloading the driver in the fw_down/dead state uncovered another issue, which can be seen in the following trace: WARNING: CPU: 51 PID: 6914 at kernel/workqueue.c:1450 __queue_work+0x358/0x440 [...] RIP: 0010:__queue_work+0x358/0x440 [...] Call Trace: <TASK> ? __warn+0x85/0x140 ? __queue_work+0x358/0x440 ? report_bug+0xfc/0x1e0 ? handle_bug+0x3f/0x70 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? __queue_work+0x358/0x440 queue_work_on+0x28/0x30 pdsc_devcmd_locked+0x96/0xe0 [pds_core] pdsc_devcmd_reset+0x71/0xb0 [pds_core] pdsc_teardown+0x51/0xe0 [pds_core] pdsc_remove+0x106/0x200 [pds_core] pci_device_remove+0x37/0xc0 device_release_driver_internal+0xae/0x140 driver_detach+0x48/0x90 bus_remove_driver+0x6d/0xf0 pci_unregister_driver+0x2e/0xa0 pdsc_cleanup_module+0x10/0x780 [pds_core] __x64_sys_delete_module+0x142/0x2b0 ? syscall_trace_enter.isra.18+0x126/0x1a0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7fbd9d03a14b [...] Fix this by preventing the devcmd reset if the FW is not running. Fixes: d9407ff11809 ("pds_core: Prevent health thread from running during reset/remove") Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Signed-off-by: Brett Creeley <brett.creeley@amd.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-10x86/bugs: Fix return type of spectre_bhi_state()Daniel Sneddon
The definition of spectre_bhi_state() incorrectly returns a const char * const. This causes the a compiler warning when building with W=1: warning: type qualifiers ignored on function return type [-Wignored-qualifiers] 2812 | static const char * const spectre_bhi_state(void) Remove the const qualifier from the pointer. Fixes: ec9404e40e8f ("x86/bhi: Add BHI mitigation knob") Reported-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/r/20240409230806.1545822-1-daniel.sneddon@linux.intel.com
2024-04-10Merge branch 'linus' into x86/urgent, to pick up dependent commitsIngo Molnar
Prepare to fix aspects of the new BHI code. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2024-04-10perf/x86: Fix out of range dataNamhyung Kim
On x86 each struct cpu_hw_events maintains a table for counter assignment but it missed to update one for the deleted event in x86_pmu_del(). This can make perf_clear_dirty_counters() reset used counter if it's called before event scheduling or enabling. Then it would return out of range data which doesn't make sense. The following code can reproduce the problem. $ cat repro.c #include <pthread.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <linux/perf_event.h> #include <sys/ioctl.h> #include <sys/mman.h> #include <sys/syscall.h> struct perf_event_attr attr = { .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CPU_CYCLES, .disabled = 1, }; void *worker(void *arg) { int cpu = (long)arg; int fd1 = syscall(SYS_perf_event_open, &attr, -1, cpu, -1, 0); int fd2 = syscall(SYS_perf_event_open, &attr, -1, cpu, -1, 0); void *p; do { ioctl(fd1, PERF_EVENT_IOC_ENABLE, 0); p = mmap(NULL, 4096, PROT_READ, MAP_SHARED, fd1, 0); ioctl(fd2, PERF_EVENT_IOC_ENABLE, 0); ioctl(fd2, PERF_EVENT_IOC_DISABLE, 0); munmap(p, 4096); ioctl(fd1, PERF_EVENT_IOC_DISABLE, 0); } while (1); return NULL; } int main(void) { int i; int n = sysconf(_SC_NPROCESSORS_ONLN); pthread_t *th = calloc(n, sizeof(*th)); for (i = 0; i < n; i++) pthread_create(&th[i], NULL, worker, (void *)(long)i); for (i = 0; i < n; i++) pthread_join(th[i], NULL); free(th); return 0; } And you can see the out of range data using perf stat like this. Probably it'd be easier to see on a large machine. $ gcc -o repro repro.c -pthread $ ./repro & $ sudo perf stat -A -I 1000 2>&1 | awk '{ if (length($3) > 15) print }' 1.001028462 CPU6 196,719,295,683,763 cycles # 194290.996 GHz (71.54%) 1.001028462 CPU3 396,077,485,787,730 branch-misses # 15804359784.80% of all branches (71.07%) 1.001028462 CPU17 197,608,350,727,877 branch-misses # 14594186554.56% of all branches (71.22%) 2.020064073 CPU4 198,372,472,612,140 cycles # 194681.113 GHz (70.95%) 2.020064073 CPU6 199,419,277,896,696 cycles # 195720.007 GHz (70.57%) 2.020064073 CPU20 198,147,174,025,639 cycles # 194474.654 GHz (71.03%) 2.020064073 CPU20 198,421,240,580,145 stalled-cycles-frontend # 100.14% frontend cycles idle (70.93%) 3.037443155 CPU4 197,382,689,923,416 cycles # 194043.065 GHz (71.30%) 3.037443155 CPU20 196,324,797,879,414 cycles # 193003.773 GHz (71.69%) 3.037443155 CPU5 197,679,956,608,205 stalled-cycles-backend # 1315606428.66% backend cycles idle (71.19%) 3.037443155 CPU5 198,571,860,474,851 instructions # 13215422.58 insn per cycle It should move the contents in the cpuc->assign as well. Fixes: 5471eea5d3bf ("perf/x86: Reset the dirty counter to prevent the leak for an RDPMC task") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240306061003.1894224-1-namhyung@kernel.org
2024-04-10drm/amdgpu: differentiate external rev id for gfx 11.5.0Yifan Zhang
This patch to differentiate external rev id for gfx 11.5.0. Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: Tim Huang <Tim.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-04-09drm/amd/display: Adjust dprefclk by down spread percentage.Zhongwei
[Why] OLED panels show no display for large vtotal timings. [How] Check if ss is enabled and read from lut for spread spectrum percentage. Adjust dprefclk as required. DP_DTO adjustment is for edp only. Cc: stable@vger.kernel.org Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Zhongwei <zhongwei.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amd/display: Set VSC SDP Colorimetry same way for MST and SSTHarry Wentland
The previous check for the is_vsc_sdp_colorimetry_supported flag for MST sink signals did nothing. Simplify the code and use the same check for MST and SST. Cc: stable@vger.kernel.org Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amd/display: Program VSC SDP colorimetry for all DP sinks >= 1.4Harry Wentland
In order for display colorimetry to work correctly on DP displays we need to send the VSC SDP packet. We should only do so for panels with DPCD revision greater or equal to 1.4 as older receivers might have problems with it. Cc: stable@vger.kernel.org Cc: Joshua Ashton <joshua@froggi.es> Cc: Xaver Hugl <xaver.hugl@gmail.com> Cc: Melissa Wen <mwen@igalia.com> Cc: Agustin Gutierrez <Agustin.Gutierrez@amd.com> Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amd/display: fix disable otg wa logic in DCN316Fudongwang
[Why] Wrong logic cause screen corruption. [How] Port logic from DCN35/314. Cc: stable@vger.kernel.org Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Fudongwang <fudong.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amd/display: Do not recursively call manual trigger programmingDillon Varone
[WHY&HOW] We should not be recursively calling the manual trigger programming function when FAMS is not in use. Cc: stable@vger.kernel.org Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amd/display: always reset ODM mode in context when adding first planeWenjing Liu
[why] In current implemenation ODM mode is only reset when the last plane is removed from dc state. For any dc validate we will always remove all current planes and add new planes. However when switching from no planes to 1 plane, ODM mode is not reset because no planes get removed. This has caused an issue where we kept ODM combine when it should have been remove when a plane is added. The change is to reset ODM mode when adding the first plane. Cc: stable@vger.kernel.org Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amdgpu: fix incorrect number of active RBs for gfx11Tim Huang
The RB bitmap should be global active RB bitmap & active RB bitmap based on active SA. Signed-off-by: Tim Huang <Tim.Huang@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-04-09drm/amd/display: Return max resolution supported by DWBAlex Hung
mode_config's max width x height is 4096x2160 and is higher than DWB's max resolution 3840x2160 which is returned instead. Cc: stable@vger.kernel.org Reviewed-by: Harry Wentland <harry.wentland@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09amd/amdkfd: sync all devices to wait all processes being evictedZhigang Luo
If there are more than one device doing reset in parallel, the first device will call kfd_suspend_all_processes() to evict all processes on all devices, this call takes time to finish. other device will start reset and recover without waiting. if the process has not been evicted before doing recover, it will be restored, then caused page fault. Signed-off-by: Zhigang Luo <Zhigang.Luo@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amdgpu: clear set_q_mode_offs when VM changedZhenGuo Yin
[Why] set_q_mode_offs don't get cleared after GPU reset, nexting SET_Q_MODE packet to init shadow memory will be skiped, hence there has a page fault. [How] VM flush is needed after GPU reset, clear set_q_mode_offs when emitting VM flush. Fixes: 8bc75586ea01 ("drm/amdgpu: workaround to avoid SET_Q_MODE packets v2") Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-04-09drm/amdgpu: Fix VCN allocation in CPX partitionLijo Lazar
VCN need not be shared in CPX mode always for all GFX 9.4.3 SOC SKUs. In certain configs, VCN instance can be exclusively allocated to a partition even under CPX mode. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amd/pm: fix the high voltage issue after unloadKenneth Feng
fix the high voltage issue after unload on smu 13.0.10 Signed-off-by: Kenneth Feng <kenneth.feng@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amd/display: Skip on writeback when it's not applicableAlex Hung
[WHY] dynamic memory safety error detector (KASAN) catches and generates error messages "BUG: KASAN: slab-out-of-bounds" as writeback connector does not support certain features which are not initialized. [HOW] Skip them when connector type is DRM_MODE_CONNECTOR_WRITEBACK. Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3199 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Acked-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amdgpu: implement IRQ_STATE_ENABLE for SDMA v4.4.2Tao Zhou
SDMA_CNTL is not set in some cases, driver configures it by itself. v2: simplify code Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amdgpu: add smu 14.0.1 discovery supportYifan Zhang
This patch to add smu 14.0.1 support Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amd/swsmu: Update smu v14.0.0 headers to be 14.0.1 compatiblelima1002
update ppsmc.h pmfw.h and driver_if.h for smu v14_0_1 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: lima1002 <li.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amdgpu : Increase the mes log buffer size as per new MES FW versionshaoyunl
From MES version 0x54, the log entry increased and require the log buffer size to be increased. The 16k is maximum size agreed Signed-off-by: shaoyunl <shaoyun.liu@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amdgpu : Add mes_log_enable to control mes log featureshaoyunl
The MES log might slow down the performance for extra step of log the data, disable it by default and introduce a parameter can enable it when necessary Signed-off-by: shaoyunl <shaoyun.liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amd/pm: fixes a random hang in S4 for SMU v13.0.4/11Tim Huang
While doing multiple S4 stress tests, GC/RLC/PMFW get into an invalid state resulting into hard hangs. Adding a GFX reset as workaround just before sending the MP1_UNLOAD message avoids this failure. Signed-off-by: Tim Huang <Tim.Huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amd/display: add DCN 351 version for microcode loadLi Ma
There is a new DCN veriosn 3.5.1 need to load Signed-off-by: Li Ma <li.ma@amd.com> Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amdgpu: Reset dGPU if suspend got abortedLijo Lazar
For SOC21 ASICs, there is an issue in re-enabling PM features if a suspend got aborted. In such cases, reset the device during resume phase. This is a workaround till a proper solution is finalized. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-04-09drm/amdgpu/umsch: reinitialize write pointer in hw initLang Yu
Otherwise the old one will be used during GPU reset. That's not expected. Signed-off-by: Lang Yu <Lang.Yu@amd.com> Reviewed-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-04-09drm/amdgpu: Refine IB schedule error loggingLijo Lazar
Downgrade to debug information when IBs are skipped. Also, use dev_* to identify the device. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Asad Kamal <asad.kamal@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-09drm/amdgpu: always force full reset for SOC21Alex Deucher
There are cases where soft reset seems to succeed, but does not, so always use mode1/2 for now. Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-04-09drm/amdkfd: Reset GPU on queue preemption failureHarish Kasiviswanathan
Currently, with F32 HWS GPU reset is only when unmap queue fails. However, if compute queue doesn't repond to preemption request in time unmap will return without any error. In this case, only preemption error is logged and Reset is not triggered. Call GPU reset in this case also. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Reviewed-by: Mukul Joshi <mukul.joshi@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2024-04-09ipv6: fix race condition between ipv6_get_ifaddr and ipv6_del_addrJiri Benc
Although ipv6_get_ifaddr walks inet6_addr_lst under the RCU lock, it still means hlist_for_each_entry_rcu can return an item that got removed from the list. The memory itself of such item is not freed thanks to RCU but nothing guarantees the actual content of the memory is sane. In particular, the reference count can be zero. This can happen if ipv6_del_addr is called in parallel. ipv6_del_addr removes the entry from inet6_addr_lst (hlist_del_init_rcu(&ifp->addr_lst)) and drops all references (__in6_ifa_put(ifp) + in6_ifa_put(ifp)). With bad enough timing, this can happen: 1. In ipv6_get_ifaddr, hlist_for_each_entry_rcu returns an entry. 2. Then, the whole ipv6_del_addr is executed for the given entry. The reference count drops to zero and kfree_rcu is scheduled. 3. ipv6_get_ifaddr continues and tries to increments the reference count (in6_ifa_hold). 4. The rcu is unlocked and the entry is freed. 5. The freed entry is returned. Prevent increasing of the reference count in such case. The name in6_ifa_hold_safe is chosen to mimic the existing fib6_info_hold_safe. [ 41.506330] refcount_t: addition on 0; use-after-free. [ 41.506760] WARNING: CPU: 0 PID: 595 at lib/refcount.c:25 refcount_warn_saturate+0xa5/0x130 [ 41.507413] Modules linked in: veth bridge stp llc [ 41.507821] CPU: 0 PID: 595 Comm: python3 Not tainted 6.9.0-rc2.main-00208-g49563be82afa #14 [ 41.508479] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) [ 41.509163] RIP: 0010:refcount_warn_saturate+0xa5/0x130 [ 41.509586] Code: ad ff 90 0f 0b 90 90 c3 cc cc cc cc 80 3d c0 30 ad 01 00 75 a0 c6 05 b7 30 ad 01 01 90 48 c7 c7 38 cc 7a 8c e8 cc 18 ad ff 90 <0f> 0b 90 90 c3 cc cc cc cc 80 3d 98 30 ad 01 00 0f 85 75 ff ff ff [ 41.510956] RSP: 0018:ffffbda3c026baf0 EFLAGS: 00010282 [ 41.511368] RAX: 0000000000000000 RBX: ffff9e9c46914800 RCX: 0000000000000000 [ 41.511910] RDX: ffff9e9c7ec29c00 RSI: ffff9e9c7ec1c900 RDI: ffff9e9c7ec1c900 [ 41.512445] RBP: ffff9e9c43660c9c R08: 0000000000009ffb R09: 00000000ffffdfff [ 41.512998] R10: 00000000ffffdfff R11: ffffffff8ca58a40 R12: ffff9e9c4339a000 [ 41.513534] R13: 0000000000000001 R14: ffff9e9c438a0000 R15: ffffbda3c026bb48 [ 41.514086] FS: 00007fbc4cda1740(0000) GS:ffff9e9c7ec00000(0000) knlGS:0000000000000000 [ 41.514726] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 41.515176] CR2: 000056233b337d88 CR3: 000000000376e006 CR4: 0000000000370ef0 [ 41.515713] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 41.516252] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 41.516799] Call Trace: [ 41.517037] <TASK> [ 41.517249] ? __warn+0x7b/0x120 [ 41.517535] ? refcount_warn_saturate+0xa5/0x130 [ 41.517923] ? report_bug+0x164/0x190 [ 41.518240] ? handle_bug+0x3d/0x70 [ 41.518541] ? exc_invalid_op+0x17/0x70 [ 41.520972] ? asm_exc_invalid_op+0x1a/0x20 [ 41.521325] ? refcount_warn_saturate+0xa5/0x130 [ 41.521708] ipv6_get_ifaddr+0xda/0xe0 [ 41.522035] inet6_rtm_getaddr+0x342/0x3f0 [ 41.522376] ? __pfx_inet6_rtm_getaddr+0x10/0x10 [ 41.522758] rtnetlink_rcv_msg+0x334/0x3d0 [ 41.523102] ? netlink_unicast+0x30f/0x390 [ 41.523445] ? __pfx_rtnetlink_rcv_msg+0x10/0x10 [ 41.523832] netlink_rcv_skb+0x53/0x100 [ 41.524157] netlink_unicast+0x23b/0x390 [ 41.524484] netlink_sendmsg+0x1f2/0x440 [ 41.524826] __sys_sendto+0x1d8/0x1f0 [ 41.525145] __x64_sys_sendto+0x1f/0x30 [ 41.525467] do_syscall_64+0xa5/0x1b0 [ 41.525794] entry_SYSCALL_64_after_hwframe+0x72/0x7a [ 41.526213] RIP: 0033:0x7fbc4cfcea9a [ 41.526528] Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 [ 41.527942] RSP: 002b:00007ffcf54012a8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 41.528593] RAX: ffffffffffffffda RBX: 00007ffcf5401368 RCX: 00007fbc4cfcea9a [ 41.529173] RDX: 000000000000002c RSI: 00007fbc4b9d9bd0 RDI: 0000000000000005 [ 41.529786] RBP: 00007fbc4bafb040 R08: 00007ffcf54013e0 R09: 000000000000000c [ 41.530375] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [ 41.530977] R13: ffffffffc4653600 R14: 0000000000000001 R15: 00007fbc4ca85d1b [ 41.531573] </TASK> Fixes: 5c578aedcb21d ("IPv6: convert addrconf hash list to RCU") Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jiri Benc <jbenc@redhat.com> Link: https://lore.kernel.org/r/8ab821e36073a4a406c50ec83c9e8dc586c539e4.1712585809.git.jbenc@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-09Merge branch 'net-start-to-replace-copy_from_sockptr'Jakub Kicinski
Eric Dumazet says: ==================== net: start to replace copy_from_sockptr() We got several syzbot reports about unsafe copy_from_sockptr() calls. After fixing some of them, it appears that we could use a new helper to factorize all the checks in one place. This series targets net tree, we can later start converting many call sites in net-next. ==================== Link: https://lore.kernel.org/r/20240408082845.3957374-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-09nfc: llcp: fix nfc_llcp_setsockopt() unsafe copiesEric Dumazet
syzbot reported unsafe calls to copy_from_sockptr() [1] Use copy_safe_from_sockptr() instead. [1] BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] BUG: KASAN: slab-out-of-bounds in copy_from_sockptr include/linux/sockptr.h:55 [inline] BUG: KASAN: slab-out-of-bounds in nfc_llcp_setsockopt+0x6c2/0x850 net/nfc/llcp_sock.c:255 Read of size 4 at addr ffff88801caa1ec3 by task syz-executor459/5078 CPU: 0 PID: 5078 Comm: syz-executor459 Not tainted 6.8.0-syzkaller-08951-gfe46a7dd189e #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] copy_from_sockptr include/linux/sockptr.h:55 [inline] nfc_llcp_setsockopt+0x6c2/0x850 net/nfc/llcp_sock.c:255 do_sock_setsockopt+0x3b1/0x720 net/socket.c:2311 __sys_setsockopt+0x1ae/0x250 net/socket.c:2334 __do_sys_setsockopt net/socket.c:2343 [inline] __se_sys_setsockopt net/socket.c:2340 [inline] __x64_sys_setsockopt+0xb5/0xd0 net/socket.c:2340 do_syscall_64+0xfd/0x240 entry_SYSCALL_64_after_hwframe+0x6d/0x75 RIP: 0033:0x7f7fac07fd89 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 91 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fff660eb788 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f7fac07fd89 RDX: 0000000000000000 RSI: 0000000000000118 RDI: 0000000000000004 RBP: 0000000000000000 R08: 0000000000000002 R09: 0000000000000000 R10: 0000000020000a80 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20240408082845.3957374-4-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-09mISDN: fix MISDN_TIME_STAMP handlingEric Dumazet
syzbot reports one unsafe call to copy_from_sockptr() [1] Use copy_safe_from_sockptr() instead. [1] BUG: KASAN: slab-out-of-bounds in copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] BUG: KASAN: slab-out-of-bounds in copy_from_sockptr include/linux/sockptr.h:55 [inline] BUG: KASAN: slab-out-of-bounds in data_sock_setsockopt+0x46c/0x4cc drivers/isdn/mISDN/socket.c:417 Read of size 4 at addr ffff0000c6d54083 by task syz-executor406/6167 CPU: 1 PID: 6167 Comm: syz-executor406 Not tainted 6.8.0-rc7-syzkaller-g707081b61156 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Call trace: dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:291 show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:298 __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd0/0x124 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:377 [inline] print_report+0x178/0x518 mm/kasan/report.c:488 kasan_report+0xd8/0x138 mm/kasan/report.c:601 __asan_report_load_n_noabort+0x1c/0x28 mm/kasan/report_generic.c:391 copy_from_sockptr_offset include/linux/sockptr.h:49 [inline] copy_from_sockptr include/linux/sockptr.h:55 [inline] data_sock_setsockopt+0x46c/0x4cc drivers/isdn/mISDN/socket.c:417 do_sock_setsockopt+0x2a0/0x4e0 net/socket.c:2311 __sys_setsockopt+0x128/0x1a8 net/socket.c:2334 __do_sys_setsockopt net/socket.c:2343 [inline] __se_sys_setsockopt net/socket.c:2340 [inline] __arm64_sys_setsockopt+0xb8/0xd4 net/socket.c:2340 __invoke_syscall arch/arm64/kernel/syscall.c:34 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:48 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:133 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:152 el0_svc+0x54/0x168 arch/arm64/kernel/entry-common.c:712 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598 Fixes: 1b2b03f8e514 ("Add mISDN core files") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Karsten Keil <isdn@linux-pingi.de> Link: https://lore.kernel.org/r/20240408082845.3957374-3-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-09net: add copy_safe_from_sockptr() helperEric Dumazet
copy_from_sockptr() helper is unsafe, unless callers did the prior check against user provided optlen. Too many callers get this wrong, lets add a helper to fix them and avoid future copy/paste bugs. Instead of : if (optlen < sizeof(opt)) { err = -EINVAL; break; } if (copy_from_sockptr(&opt, optval, sizeof(opt)) { err = -EFAULT; break; } Use : err = copy_safe_from_sockptr(&opt, sizeof(opt), optval, optlen); if (err) break; Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240408082845.3957374-2-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-09bcachefs: btree_node_scan: Respect member.data_allowedKent Overstreet
If a device wasn't used for btree nodes, no need to scan for them. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-04-10zonefs: Use str_plural() to fix Coccinelle warningThorsten Blum
Fixes the following Coccinelle/coccicheck warning reported by string_choices.cocci: opportunity for str_plural(zgroup->g_nr_zones) Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com> Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2024-04-09io-uring: correct typo in comment for IOU_F_TWQ_LAZY_WAKEHaiyue Wang
The 'r' key is near to 't' key, that makes 'with' to be 'wirh' ? :) Signed-off-by: Haiyue Wang <haiyue.wang@intel.com> Link: https://lore.kernel.org/r/20240409173531.846714-1-haiyue.wang@intel.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-04-09tools/power/turbostat: Fix uncore frequency file stringJustin Ernst
Running turbostat on a 16 socket HPE Scale-up Compute 3200 (SapphireRapids) fails with: turbostat: /sys/devices/system/cpu/intel_uncore_frequency/package_010_die_00/current_freq_khz: open failed: No such file or directory We observe the sysfs uncore frequency directories named: ... package_09_die_00/ package_10_die_00/ package_11_die_00/ ... package_15_die_00/ The culprit is an incorrect sprintf format string "package_0%d_die_0%d" used with each instance of reading uncore frequency files. uncore-frequency-common.c creates the sysfs directory with the format "package_%02d_die_%02d". Once the package value reaches double digits, the formats diverge. Change each instance of "package_0%d_die_0%d" to "package_%02d_die_%02d". [lenb: deleted the probe part of this patch, as it was already fixed] Signed-off-by: Justin Ernst <justin.ernst@hpe.com> Reviewed-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2024-04-09tools/power/turbostat: Unify graphics sysfs snapshotsZhang Rui
Graphics sysfs snapshots share similar logic. Combine them into one function to avoid code duplication. No functional change. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2024-04-09tools/power/turbostat: Cache graphics sysfs pathZhang Rui
Graphics drivers (i915/Xe) have different sysfs knobs on different platforms, and it is possible that different sysfs knobs fit into the same turbostat columns. Instead of specifying different sysfs knobs every time, detect them once and cache the path for future use. No functional change. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2024-04-09tools/power/turbostat: Enable MSR_CORE_C1_RES support for ICXZhang Rui
Enable Core C1 hardware residency counter (MSR_CORE_C1_RES) on ICX. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2024-04-09tools/power turbostat: Add selftestsPatryk Wlazlyn
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2024-04-09tools/power turbostat: read RAPL counters via perfPatryk Wlazlyn
Some of the future Intel platforms will require reading the RAPL counters via perf and not MSR. On current platforms we can still read them using both ways. Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2024-04-09drm/vmwgfx: Enable DMA mappings with SEVZack Rusin
Enable DMA mappings in vmwgfx after TTM has been fixed in commit 3bf3710e3718 ("drm/ttm: Add a generic TTM memcpy move for page-based iomem") This enables full guest-backed memory support and in particular allows usage of screen targets as the presentation mechanism. Signed-off-by: Zack Rusin <zack.rusin@broadcom.com> Reported-by: Ye Li <ye.li@broadcom.com> Tested-by: Ye Li <ye.li@broadcom.com> Fixes: 3b0d6458c705 ("drm/vmwgfx: Refuse DMA operation when SEV encryption is active") Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v6.6+ Reviewed-by: Martin Krastev <martin.krastev@broadcom.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240408022802.358641-1-zack.rusin@broadcom.com
2024-04-09Merge tag 'drm-fixes-2024-04-09' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds
Pull drm nouveau fix from Dave Airlie: "A previous fix to nouveau devinit on the GSP paths fixed the Turing but broke Ampere, I did some more digging and found the proper fix. Sending it early as I want to make sure it makes the next 6.8 stable kernels to fix the regression. Regular fixes will be at end of week as usual. nouveau: - regression fix for GSP display enable" * tag 'drm-fixes-2024-04-09' of https://gitlab.freedesktop.org/drm/kernel: nouveau: fix devinit paths to only handle display on GSP.
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 22:54:52 +0000