summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-11-07can: af_can: can_exit(): add missing dev_remove_pack() of canxl_packetChen Zhongjin
In can_init(), dev_add_pack(&canxl_packet) is added but not removed in can_exit(). It breaks the packet handler list and can make kernel panic when can_init() is called for the second time. | > modprobe can && rmmod can | > rmmod xxx && modprobe can | | BUG: unable to handle page fault for address: fffffbfff807d7f4 | RIP: 0010:dev_add_pack+0x133/0x1f0 | Call Trace: | <TASK> | can_init+0xaa/0x1000 [can] | do_one_initcall+0xd3/0x4e0 | ... Fixes: fb08cba12b52 ("can: canxl: update CAN infrastructure for CAN XL frames") Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20221031033053.37849-1-chenzhongjin@huawei.com [mkl: adjust subject and commit message] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-11-07Merge branch 'genetlink-per-op-type-policies'David S. Miller
Jakub Kicinski says: ==================== genetlink: support per op type policies While writing new genetlink families I was increasingly annoyed by the fact that we don't support different policies for do and dump callbacks. This makes it hard to do proper input validation for dumps which usually have a lot more narrow range of accepted attributes. There is also a minor inconvenience of not supporting different per_doit and post_doit callbacks per op. This series addresses those problems by introducing another op format. v3: - minor fixes to patch 12 after I took it for a spin with a real family - adjust commit msg in patch 8 v2: https://lore.kernel.org/all/20221102213338.194672-1-kuba@kernel.org/ - wait for net changes to propagate - restore the missing comment in patch 1 - drop extra space in patch 3 - improve commit message in patch 4 v1: https://lore.kernel.org/all/20221018230728.1039524-1-kuba@kernel.org/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07genetlink: convert control family to split opsJakub Kicinski
Prove that the split ops work. Sadly we need to keep bug-wards compatibility and specify the same policy for dump as do, even tho we don't parse inputs for the dump. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07genetlink: allow families to use split ops directlyJakub Kicinski
Let families to hook in the new split ops. They are more flexible and should not be much larger than full ops. Each split op is 40B while full op is 48B. Devlink for example has 54 dos and 19 dumps, 2 of the dumps do not have a do -> 56 full commands = 2688B. Split ops would have taken 2920B, so 9% more space while allowing individual per/post doit and per-type policies. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07genetlink: inline old iteration helpersJakub Kicinski
All dumpers use the iterators now, inline the cmd by index stuff into iterator code. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07genetlink: use iterator in the op to policy map dumpingJakub Kicinski
We can't put the full iterator in the struct ctrl_dump_policy_ctx because dump context is statically sized by netlink core. Allocate it dynamically. Rename policy to dump_map to make the logic a little easier to follow. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07genetlink: add iterator for walking family opsJakub Kicinski
Subsequent changes will expose split op structures to users, so walking the family ops with just an index will get harder. Add a structured iterator, convert the simple cases. Policy dumping needs more careful conversion. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07genetlink: inline genl_get_cmd()Jakub Kicinski
All callers go via genl_get_cmd_split() now, so rename it to genl_get_cmd() remove the original. Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07genetlink: support split policies in ctrl_dumppolicy_put_op()Jakub Kicinski
Pass do and dump versions of the op to ctrl_dumppolicy_put_op() so that it can provide a different policy index for the two. Since we now look at policies, and those are set appropriately there's no need to look at the GENL_DONT_VALIDATE_DUMP flag. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07genetlink: add policies for both doit and dumpit in ctrl_dumppolicy_start()Jakub Kicinski
Separate adding doit and dumpit policies for CTRL_CMD_GETPOLICY. This has no effect until we actually allow do and dump to come from different sources as netlink_policy_dump_add_policy() does deduplication. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07genetlink: check for callback type at op load timeJakub Kicinski
Now that genl_get_cmd_split() is informed what type of callback user is trying to access (do or dump) we can check that this callback is indeed available and return an error early. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07genetlink: load policy based on validation flagsJakub Kicinski
Set the policy and maxattr pointers based on validation flags. genl_family_rcv_msg_attrs_parse() will do nothing and return NULL if maxattrs is zero, so no behavior change is expected. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07genetlink: introduce split op representationJakub Kicinski
We currently have two forms of operations - small ops and "full" ops (or just ops). The former does not have pointers for some of the less commonly used features (namely dump start/done and policy). The "full" ops, however, still don't contain all the necessary information. In particular the policy is per command ID, while do and dump often accept different attributes. It's also not possible to define different pre_doit and post_doit callbacks for different commands within the family. At the same time a lot of commands do not support dumping and therefore all the dump-related information is wasted space. Create a new command representation which can hold info about a do implementation or a dump implementation, but not both at the same time. Use this new representation on the command execution path (genl_family_rcv_msg) as we either run a do or a dump and don't have to create a "full" op there. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07genetlink: move the private fields in struct genl_familyJakub Kicinski
Move the private fields down to form a "private section". Use the kdoc "private:" label comment thing to hide them from the main kdoc comment. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07genetlink: refactor the cmd <> policy mapping dumpJakub Kicinski
The code at the top of ctrl_dumppolicy() dumps mappings between ops and policies. It supports dumping both the entire family and single op if dump is filtered. But both of those cases are handled inside a loop, which makes the logic harder to follow and change. Refactor to split the two cases more clearly. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07ipv6: addrlabel: fix infoleak when sending struct ifaddrlblmsg to networkAlexander Potapenko
When copying a `struct ifaddrlblmsg` to the network, __ifal_reserved remained uninitialized, resulting in a 1-byte infoleak: BUG: KMSAN: kernel-network-infoleak in __netdev_start_xmit ./include/linux/netdevice.h:4841 __netdev_start_xmit ./include/linux/netdevice.h:4841 netdev_start_xmit ./include/linux/netdevice.h:4857 xmit_one net/core/dev.c:3590 dev_hard_start_xmit+0x1dc/0x800 net/core/dev.c:3606 __dev_queue_xmit+0x17e8/0x4350 net/core/dev.c:4256 dev_queue_xmit ./include/linux/netdevice.h:3009 __netlink_deliver_tap_skb net/netlink/af_netlink.c:307 __netlink_deliver_tap+0x728/0xad0 net/netlink/af_netlink.c:325 netlink_deliver_tap net/netlink/af_netlink.c:338 __netlink_sendskb net/netlink/af_netlink.c:1263 netlink_sendskb+0x1d9/0x200 net/netlink/af_netlink.c:1272 netlink_unicast+0x56d/0xf50 net/netlink/af_netlink.c:1360 nlmsg_unicast ./include/net/netlink.h:1061 rtnl_unicast+0x5a/0x80 net/core/rtnetlink.c:758 ip6addrlbl_get+0xfad/0x10f0 net/ipv6/addrlabel.c:628 rtnetlink_rcv_msg+0xb33/0x1570 net/core/rtnetlink.c:6082 ... Uninit was created at: slab_post_alloc_hook+0x118/0xb00 mm/slab.h:742 slab_alloc_node mm/slub.c:3398 __kmem_cache_alloc_node+0x4f2/0x930 mm/slub.c:3437 __do_kmalloc_node mm/slab_common.c:954 __kmalloc_node_track_caller+0x117/0x3d0 mm/slab_common.c:975 kmalloc_reserve net/core/skbuff.c:437 __alloc_skb+0x27a/0xab0 net/core/skbuff.c:509 alloc_skb ./include/linux/skbuff.h:1267 nlmsg_new ./include/net/netlink.h:964 ip6addrlbl_get+0x490/0x10f0 net/ipv6/addrlabel.c:608 rtnetlink_rcv_msg+0xb33/0x1570 net/core/rtnetlink.c:6082 netlink_rcv_skb+0x299/0x550 net/netlink/af_netlink.c:2540 rtnetlink_rcv+0x26/0x30 net/core/rtnetlink.c:6109 netlink_unicast_kernel net/netlink/af_netlink.c:1319 netlink_unicast+0x9ab/0xf50 net/netlink/af_netlink.c:1345 netlink_sendmsg+0xebc/0x10f0 net/netlink/af_netlink.c:1921 ... This patch ensures that the reserved field is always initialized. Reported-by: syzbot+3553517af6020c4f2813f1003fe76ef3cbffe98d@syzkaller.appspotmail.com Fixes: 2a8cc6c89039 ("[IPV6] ADDRCONF: Support RFC3484 configurable address selection policy table.") Signed-off-by: Alexander Potapenko <glider@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07Merge branch 'am65-cpsw-suspend-resume'David S. Miller
Roger Quadros says: ==================== net: ethernet: ti: am65-cpsw: Add suspend/resume support This series enables PM_SLEEP(suspend/resume) support to the am65-cpsw network driver. Dual-emac and Switch mode are tested to work with suspend/resume on AM62-SK platform. It can be verified on the following branch https://github.com/rogerq/linux/commits/for-v6.2/am62-cpsw-lpm-1.0 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07net: ethernet: ti: am65-cpsw: Fix hardware switch mode on suspend/resumeRoger Quadros
On low power during system suspend the ALE table context is lost. Save the ALE contect before suspend and restore it after resume. Signed-off-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07net: ethernet: ti: am65-cpsw: retain PORT_VLAN_REG after suspend/resumeRoger Quadros
During suspend resume the context of PORT_VLAN_REG is lost so save it during suspend and restore it during resume for host port and slave ports. Signed-off-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07net: ethernet: ti: cpsw_ale: Add cpsw_ale_restore() helperRoger Quadros
This can be used by device driver to restore ALE context. The data produced by cpsw_ale_dump() can be passed to cpsw_ale_restore(). This is required as on certain platforms the ALE context is lost on low power suspend/resume. Signed-off-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07net: ethernet: ti: am65-cpsw: Add suspend/resume supportRoger Quadros
Add PM handlers for System suspend/resume. As DMA driver doesn't yet support suspend/resume we free up the DMA channels at suspend and acquire and initialize them at resume. Move the init/free dma calls to ndo_open/close() hooks so it is symmetric and easier to invoke from suspend/resume handler. As CPTS looses contect during suspend/resume, invoke the necessary CPTS suspend/resume helpers. Signed-off-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07net: ethernet: ti: am65-cpsw/cpts: Add suspend/resume helpersRoger Quadros
CPTS looses context on suspend (e.g. on AM62). Provide suspend/resume hooks in CPTS driver. These will be invoked by CPSW driver if CPTS was instantiated by CPSW. Signed-off-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07platform/x86: p2sb: Don't fail if unknown CPU is foundAndy Shevchenko
We have accessing P2SB from a very few places for quite known hardware. When a new SoC appears in intel-family.h it's not obvious that it needs to be added to p2sb.c as well. Instead, provide default BDF and refactor p2sb_get_devfn() to always succeed. If in the future we would need to exclude something, we may add a list of unsupported IDs. Without this change the iTCO on Intel Comet Lake SoCs became unavailable: i801_smbus 0000:00:1f.4: failed to create iTCO device Fixes: 5c7b9167ddf8 ("i2c: i801: convert to use common P2SB accessor") Reported-and-tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221104154916.35231-1-andriy.shevchenko@linux.intel.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-11-07platform/x86/intel/hid: Add some ACPI device IDsIvan Hu
Add INTC1076 (JasonLake), INTC1077 (MeteorLake) and INTC1078 (RaptorLake) devices IDs. Signed-off-by: Ivan Hu <ivan.hu@canonical.com> Link: https://lore.kernel.org/r/20221102020548.5225-1-ivan.hu@canonical.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-11-07platform/x86/intel/pmt: Sapphire Rapids PMT errata fixDavid E. Box
On Sapphire Rapids, due to a hardware issue affecting the PUNIT telemetry region, reads that are not done in QWORD quantities and alignment may return incorrect data. Use a custom 64-bit copy for this region. Signed-off-by: David E. Box <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20221105034228.1376677-1-david.e.box@linux.intel.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-11-07platform/x86: hp_wmi: Fix rfkill causing soft blocked wifiJorge Lopez
After upgrading BIOS to U82 01.02.01 Rev.A, the console is flooded strange char "^@" which printed out every second and makes login nearly impossible. Also the below messages were shown both in console and journal/dmesg every second: usb 1-3: Device not responding to setup address. usb 1-3: device not accepting address 4, error -71 usb 1-3: device descriptor read/all, error -71 usb usb1-port3: unable to enumerate USB device Wifi is soft blocked by checking rfkill. When unblocked manually, after few seconds it would be soft blocked again. So I was suspecting something triggered rfkill to soft block wifi. At the end it was fixed by removing hp_wmi module. The root cause is the way hp-wmi driver handles command 1B on post-2009 BIOS. In pre-2009 BIOS, command 1Bh return 0x4 to indicate that BIOS no longer controls the power for the wireless devices. Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216468 Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20221028155527.7724-1-jorge.lopez2@hp.com Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-11-07platform/x86: touchscreen_dmi: Add info for the RCA Cambio W101 v2 2-in-1Hans de Goede
Add touchscreen info for the RCA Cambio W101 v2 2-in-1. Link: https://github.com/onitake/gsl-firmware/discussions/193 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20221025141131.509211-1-hdegoede@redhat.com
2022-11-07platform/x86: ideapad-laptop: Disable touchpad_switchManyi Li
Ideapads for "Lenovo Yoga 3 Pro 1370" and "ZhaoYang K4e-IML" do not use EC to switch touchpad. Reading VPCCMD_R_TOUCHPAD will return zero thus touchpad may be blocked unexpectedly. Signed-off-by: Manyi Li <limanyi@uniontech.com> Link: https://lore.kernel.org/r/20221018095323.14591-1-limanyi@uniontech.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-11-07ACPI: video: Add backlight=native DMI quirk for Dell G15 5515Hans de Goede
The Dell G15 5515 has the WMI interface (and WMI call returns) expected by the nvidia-wmi-ec-backlight interface. But the backlight class device registered by the nvidia-wmi-ec-backlight driver does not actually work. The amdgpu_bl0 native GPU backlight class device does actually work, add a backlight=native DMI quirk for this. Reported-by: Iris <pawel.js@protonmail.com> Reviewed-by: Daniel Dadap <ddadap@nvidia.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- Changes in v2: - Add a comment that this needs to be revisited when dynamic-mux support gets added (suggested by: Daniel Dadap)
2022-11-07net: phy: fix yt8521 duplicated argument to & or |Frank
cocci warnings: (new ones prefixed by >>) >> drivers/net/phy/motorcomm.c:1122:8-35: duplicated argument to & or | drivers/net/phy/motorcomm.c:1126:8-35: duplicated argument to & or | drivers/net/phy/motorcomm.c:1130:8-34: duplicated argument to & or | drivers/net/phy/motorcomm.c:1134:8-34: duplicated argument to & or | The second YT8521_RC1R_GE_TX_DELAY_xx should be YT8521_RC1R_FE_TX_DELAY_xx. Fixes: 70479a40954c ("net: phy: Add driver for Motorcomm yt8521 gigabit ethernet phy") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Frank <Frank.Sae@motor-comm.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07ACPI: video: Make acpi_video_backlight_use_native() always return trueHans de Goede
Testing has shown that there are quite a few laptop models which rely on native backlight control and which do not support ACPI video bus backlight control, causing __acpi_video_get_backlight_type() to return vendor. Known Windows laptop models affected by this are: Acer Aspire 1640 HP Compaq nc6120 IBM ThinkPad X40 System76 Starling Star1 and the following MacBook models are affected too: Apple MacBook 2.1 Apple MacBook 4.1 Apple MacBook Pro 7.1 the list of affected Windows laptop models is likely just the top of the iceberg. So for now lets undo the change to not register native backlight class devices when __acpi_video_get_backlight_type() != native. Since as part of the backlight-detect refactor the detection code now relies on the GPU drivers calling acpi_video_backlight_use_native() to learn that native backlight support is available we cannot just remove the acpi_video_backlight_use_native() calls from the GPU drivers. Instead modify acpi_video_backlight_use_native() to always return true for now. This is meant as a temporary work-around, which will be removed again when the heuristics from __acpi_video_get_backlight_type() have been improved so that they will return native on affected models. Reported-by: Matthew Garrett <mjg59@srcf.ucam.org> Reported-by: John Warriner <taijitu@cox.net> Reported-by: Scott Ostrander <sos12_3@hotmail.com> Reported-by: Matthias Rampke <matthias.rampke@googlemail.com> Reported-by: Milan Hodoscek <hmilan@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2022-11-07gve: Fix error return code in gve_prefill_rx_pages()Yang Yingliang
If alloc_page() fails in gve_prefill_rx_pages(), it should return an error code in the error path. Fixes: 82fd151d38d9 ("gve: Reduce alloc and copy costs in the GQ rx path") Cc: Jeroen de Borst <jeroendb@google.com> Cc: Catherine Sullivan <csully@google.com> Cc: Shailend Chand <shailend@google.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07tcp: prohibit TCP_REPAIR_OPTIONS if data was already sentLu Wei
If setsockopt with option name of TCP_REPAIR_OPTIONS and opt_code of TCPOPT_SACK_PERM is called to enable sack after data is sent and dupacks are received , it will trigger a warning in function tcp_verify_left_out() as follows: ============================================ WARNING: CPU: 8 PID: 0 at net/ipv4/tcp_input.c:2132 tcp_timeout_mark_lost+0x154/0x160 tcp_enter_loss+0x2b/0x290 tcp_retransmit_timer+0x50b/0x640 tcp_write_timer_handler+0x1c8/0x340 tcp_write_timer+0xe5/0x140 call_timer_fn+0x3a/0x1b0 __run_timers.part.0+0x1bf/0x2d0 run_timer_softirq+0x43/0xb0 __do_softirq+0xfd/0x373 __irq_exit_rcu+0xf6/0x140 The warning is caused in the following steps: 1. a socket named socketA is created 2. socketA enters repair mode without build a connection 3. socketA calls connect() and its state is changed to TCP_ESTABLISHED directly 4. socketA leaves repair mode 5. socketA calls sendmsg() to send data, packets_out and sack_outs(dup ack receives) increase 6. socketA enters repair mode again 7. socketA calls setsockopt with TCPOPT_SACK_PERM to enable sack 8. retransmit timer expires, it calls tcp_timeout_mark_lost(), lost_out increases 9. sack_outs + lost_out > packets_out triggers since lost_out and sack_outs increase repeatly In function tcp_timeout_mark_lost(), tp->sacked_out will be cleared if Step7 not happen and the warning will not be triggered. As suggested by Denis and Eric, TCP_REPAIR_OPTIONS should be prohibited if data was already sent. socket-tcp tests in CRIU has been tested as follows: $ sudo ./test/zdtm.py run -t zdtm/static/socket-tcp* --keep-going \ --ignore-taint socket-tcp* represent all socket-tcp tests in test/zdtm/static/. Fixes: b139ba4e90dc ("tcp: Repair connection-time negotiated parameters") Signed-off-by: Lu Wei <luwei32@huawei.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07net: fec: simplify the code logic of quirksShenwei Wang
Simplify the code logic of handling the quirk of FEC_QUIRK_HAS_RACC. If a SoC has the RACC quirk, the driver will enable the 16bit shift by default in the probe function for a better performance. This patch handles the logic in one place to make the logic simple and clean. The patch optimizes the fec_enet_xdp_get_tx_queue function according to Paolo Abeni's comments, and it also exludes the SoCs that require to do frame swap from XDP support. Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07s390/lcs: Fix return type of lcs_start_xmit()Nathan Chancellor
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG), indirect call targets are validated against the expected function pointer prototype to make sure the call target is valid to help mitigate ROP attacks. If they are not identical, there is a failure at run time, which manifests as either a kernel panic or thread getting killed. A proposed warning in clang aims to catch these at compile time, which reveals: drivers/s390/net/lcs.c:2090:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict] .ndo_start_xmit = lcs_start_xmit, ^~~~~~~~~~~~~~ drivers/s390/net/lcs.c:2097:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict] .ndo_start_xmit = lcs_start_xmit, ^~~~~~~~~~~~~~ ->ndo_start_xmit() in 'struct net_device_ops' expects a return type of 'netdev_tx_t', not 'int'. Adjust the return type of lcs_start_xmit() to match the prototype's to resolve the warning and potential CFI failure, should s390 select ARCH_SUPPORTS_CFI_CLANG in the future. Link: https://github.com/ClangBuiltLinux/linux/issues/1750 Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07s390/netiucv: Fix return type of netiucv_tx()Nathan Chancellor
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG), indirect call targets are validated against the expected function pointer prototype to make sure the call target is valid to help mitigate ROP attacks. If they are not identical, there is a failure at run time, which manifests as either a kernel panic or thread getting killed. A proposed warning in clang aims to catch these at compile time, which reveals: drivers/s390/net/netiucv.c:1854:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict] .ndo_start_xmit = netiucv_tx, ^~~~~~~~~~ ->ndo_start_xmit() in 'struct net_device_ops' expects a return type of 'netdev_tx_t', not 'int'. Adjust the return type of netiucv_tx() to match the prototype's to resolve the warning and potential CFI failure, should s390 select ARCH_SUPPORTS_CFI_CLANG in the future. Additionally, while in the area, remove a comment block that is no longer relevant. Link: https://github.com/ClangBuiltLinux/linux/issues/1750 Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07s390/ctcm: Fix return type of ctc{mp,}m_tx()Nathan Chancellor
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG), indirect call targets are validated against the expected function pointer prototype to make sure the call target is valid to help mitigate ROP attacks. If they are not identical, there is a failure at run time, which manifests as either a kernel panic or thread getting killed. A proposed warning in clang aims to catch these at compile time, which reveals: drivers/s390/net/ctcm_main.c:1064:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict] .ndo_start_xmit = ctcm_tx, ^~~~~~~ drivers/s390/net/ctcm_main.c:1072:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict] .ndo_start_xmit = ctcmpc_tx, ^~~~~~~~~ ->ndo_start_xmit() in 'struct net_device_ops' expects a return type of 'netdev_tx_t', not 'int'. Adjust the return type of ctc{mp,}m_tx() to match the prototype's to resolve the warning and potential CFI failure, should s390 select ARCH_SUPPORTS_CFI_CLANG in the future. Additionally, while in the area, remove a comment block that is no longer relevant. Link: https://github.com/ClangBuiltLinux/linux/issues/1750 Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07net: wwan: iosm: Remove unnecessary if_mutex lockZhaoping Shu
These WWAN network interface operations (create/delete/open/close) are already protected by RTNL lock, i.e., wwan_ops.newlink(), wwan_ops.dellink(), net_device_ops.ndo_open() and net_device.ndo_stop() are called with RTNL lock held. Therefore, this patch removes the unnecessary if_mutex. Signed-off-by: Zhaoping Shu <zhaoping.shu@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07net: wwan: mhi: fix memory leak in mhi_mbim_dellinkHW He
MHI driver registers network device without setting the needs_free_netdev flag, and does NOT call free_netdev() when unregisters network device, which causes a memory leak. This patch sets needs_free_netdev to true when registers network device, which makes netdev subsystem call free_netdev() automatically after unregister_netdevice(). Fixes: aa730a9905b7 ("net: wwan: Add MHI MBIM network driver") Signed-off-by: HW He <hw.he@mediatek.com> Signed-off-by: Zhaoping Shu <zhaoping.shu@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07net: wwan: iosm: fix memory leak in ipc_wwan_dellinkHW He
IOSM driver registers network device without setting the needs_free_netdev flag, and does NOT call free_netdev() when unregisters network device, which causes a memory leak. This patch sets needs_free_netdev to true when registers network device, which makes netdev subsystem call free_netdev() automatically after unregister_netdevice(). Fixes: 2a54f2c77934 ("net: iosm: net driver") Signed-off-by: HW He <hw.he@mediatek.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Zhaoping Shu <zhaoping.shu@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07net: wwan: t7xx: Add NAPI supportHaijun Liu
Replace the work queue based RX flow with a NAPI implementation Remove rx_thread and dpmaif_rxq_work. Enable GRO on RX path. Introduce dummy network device. its responsibility is - Binds one NAPI object for each DL HW queue and acts as the agent of all those network devices. - Use NAPI object to poll DL packets. - Helps to dispatch each packet to the network interface. Signed-off-by: Haijun Liu <haijun.liu@mediatek.com> Co-developed-by: Sreehari Kancharla <sreehari.kancharla@linux.intel.com> Signed-off-by: Sreehari Kancharla <sreehari.kancharla@linux.intel.com> Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com> Acked-by: Ricardo Martinez <ricardo.martinez@linux.intel.com> Acked-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07net: wwan: t7xx: Use needed_headroom instead of hard_header_lenIlpo Järvinen
hard_header_len is used by gro_list_prepare() but on Rx, there is no header so use needed_headroom instead. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sreehari Kancharla <sreehari.kancharla@linux.intel.com> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07hamradio: fix issue of dev reference count leakage in bpq_device_event()Zhengchao Shao
When following tests are performed, it will cause dev reference counting leakage. a)ip link add bond2 type bond mode balance-rr b)ip link set bond2 up c)ifenslave -f bond2 rose1 d)ip link del bond2 When new bond device is created, the default type of the bond device is ether. And the bond device is up, bpq_device_event() receives the message and creates a new bpq device. In this case, the reference count value of dev is hold once. But after "ifenslave -f bond2 rose1" command is executed, the type of the bond device is changed to rose. When the bond device is unregistered, bpq_device_event() will not put the dev reference count. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07net: lapbether: fix issue of dev reference count leakage in ↵Zhengchao Shao
lapbeth_device_event() When following tests are performed, it will cause dev reference counting leakage. a)ip link add bond2 type bond mode balance-rr b)ip link set bond2 up c)ifenslave -f bond2 rose1 d)ip link del bond2 When new bond device is created, the default type of the bond device is ether. And the bond device is up, lapbeth_device_event() receives the message and creates a new lapbeth device. In this case, the reference count value of dev is hold once. But after "ifenslave -f bond2 rose1" command is executed, the type of the bond device is changed to rose. When the bond device is unregistered, lapbeth_device_event() will not put the dev reference count. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07net: hinic: Add support for configuration of rx-vlan-filter by ethtoolCai Huoqing
When ethtool config rx-vlan-filter, the driver will send control command to firmware, then set to hardware in this patch. Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07net: hinic: Add control command support for VF PMD driver in DPDKCai Huoqing
HINIC has a mailbox for PF-VF communication and the VF driver could send port control command to PF driver via mailbox. The control command only can be set to register in PF, so add support in PF driver for VF PMD driver control command when VF PMD driver work with linux PF driver. Then, no need to add handlers to nic_vf_cmd_msg_handler[], because the host driver just forwards it to the firmware. Actually the firmware works on a coprocessor MGMT_CPU(inside the NIC) which will recv and deal with these commands. Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07net: hinic: Convert the cmd code from decimal to hex to be more readableCai Huoqing
The print cmd code is in hex, so using hex cmd code intead of decimal is easy to check the value with print info. Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07dt-bindings: net: dsa-port: constrain number of 'reg' in portsKrzysztof Kozlowski
'reg' without any constraints allows multiple items which is not the intention in DSA port schema (as physical port is expected to have only one address). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07dt-bindings: net: constrain number of 'reg' in ethernet portsKrzysztof Kozlowski
'reg' without any constraints allows multiple items which is not the intention for Ethernet controller's port number. Constrain the 'reg' on AX88178 and LAN95xx USB Ethernet Controllers. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-07net: axiemac: add PM callbacks to support suspend/resumeAndy Chiu
Support basic system-wide suspend and resume functions Signed-off-by: Andy Chiu <andy.chiu@sifive.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 14:46:04 +0000