| Age | Commit message (Collapse) | Author |
|---|
|
Merge Rust support for cpufreq and OPP, a new Rust-based cpufreq-dt
driver, an SCMI cpufreq driver cleanup, and an ACPI cpufreq driver
regression fix:
- Add Rust abstractions for CPUFreq framework (Viresh Kumar).
- Add Rust abstractions for OPP framework (Viresh Kumar).
- Add basic Rust abstractions for Clk and Cpumask frameworks (Viresh
Kumar).
- Clean up the SCMI cpufreq driver somewhat (Mike Tipton).
- Use KHz as the nominal_freq units in get_max_boost_ratio() in the
ACPI cpufreq driver (iGautham Shenoy).
* pm-cpufreq:
acpi-cpufreq: Fix nominal_freq units to KHz in get_max_boost_ratio()
rust: opp: Move `cfg(CONFIG_OF)` attribute to the top of doc test
rust: opp: Make the doctest example depend on CONFIG_OF
cpufreq: scmi: Skip SCMI devices that aren't used by the CPUs
cpufreq: Add Rust-based cpufreq-dt driver
rust: opp: Extend OPP abstractions with cpufreq support
rust: cpufreq: Extend abstractions for driver registration
rust: cpufreq: Extend abstractions for policy and driver ops
rust: cpufreq: Add initial abstractions for cpufreq framework
rust: opp: Add abstractions for the configuration options
rust: opp: Add abstractions for the OPP table
rust: opp: Add initial abstractions for OPP framework
rust: cpu: Add from_cpu()
rust: macros: enable use of hyphens in module names
rust: clk: Add initial abstractions
rust: clk: Add helpers for Rust code
MAINTAINERS: Add entry for Rust cpumask API
rust: cpumask: Add initial abstractions
rust: cpumask: Add few more helpers
|
|
Merge fixes for issues introduced by recent ACPI changes merged
previously:
- Unbreak acpi_ut_safe_strncpy() by restoring its previous behavior
changed incorrectly by a recent update (Ahmed Salem).
- Make a new static checker warning in the recently introduced ACPI
MRRM table parser go away (Dan Carpenter).
- Fix ACPI table referece leak in error path of einj_probe() (Dan
Carpenter).
* acpica:
ACPICA: Switch back to using strncpy() in acpi_ut_safe_strncpy()
* acpi-tables:
ACPI: MRRM: Silence error code static checker warning
* acpi-apei:
ACPI: APEI: EINJ: Clean up on error in einj_probe()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core:
- Introduction of iommu-pages infrastructure to consolitate
page-table allocation code among hardware drivers. This is
ground-work for more generalization in the future
- Remove IOMMU_DEV_FEAT_SVA and IOMMU_DEV_FEAT_IOPF feature flags
- Convert virtio-iommu to domain_alloc_paging()
- KConfig cleanups
- Some small fixes for possible overflows and race conditions
Intel VT-d driver:
- Restore WO permissions on second-level paging entries
- Use ida to manage domain id
- Miscellaneous cleanups
AMD-Vi:
- Make sure notifiers finish running before module unload
- Add support for HTRangeIgnore feature
- Allow matching ACPI HID devices without matching UIDs
ARM-SMMU:
- SMMUv2:
- Recognise the compatible string for SAR2130P MDSS in the
Qualcomm driver, as this device requires an identity domain
- Fix Adreno stall handling so that GPU debugging is more robust
and doesn't e.g. result in deadlock
- SMMUv3:
- Fix ->attach_dev() error reporting for unrecognised domains
- IO-pgtable:
- Allow clients (notably, drivers that process requests from
userspace) to silence warnings when mapping an already-mapped
IOVA
S390:
- Add support for additional table regions
Mediatek:
- Add support for MT6893 MM IOMMU
And some smaller fixes and improvements in various other drivers"
* tag 'iommu-updates-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (75 commits)
iommu/vt-d: Restore context entry setup order for aliased devices
iommu/mediatek: Fix compatible typo for mediatek,mt6893-iommu-mm
iommu/arm-smmu-qcom: Make set_stall work when the device is on
iommu/arm-smmu: Move handing of RESUME to the context fault handler
iommu/arm-smmu-qcom: Enable threaded IRQ for Adreno SMMUv2/MMU500
iommu/io-pgtable-arm: Add quirk to quiet WARN_ON()
iommu: Clear the freelist after iommu_put_pages_list()
iommu/vt-d: Change dmar_ats_supported() to return boolean
iommu/vt-d: Eliminate pci_physfn() in dmar_find_matched_satc_unit()
iommu/vt-d: Replace spin_lock with mutex to protect domain ida
iommu/vt-d: Use ida to manage domain id
iommu/vt-d: Restore WO permissions on second-level paging entries
iommu/amd: Allow matching ACPI HID devices without matching UIDs
iommu: make inclusion of arm/arm-smmu-v3 directory conditional
iommu: make inclusion of riscv directory conditional
iommu: make inclusion of amd directory conditional
iommu: make inclusion of intel directory conditional
iommu: remove duplicate selection of DMAR_TABLE
iommu/fsl_pamu: remove trailing space after \n
iommu/arm-smmu-qcom: Add SAR2130P MDSS compatible
...
|
|
When gfs2_sys_fs_add() fails, it sets sb->s_fs_info to NULL on its error
path (see commit 0d515210b696 ("GFS2: Add kobject release method")).
The intention seems to be to prevent dereferencing sb->s_fs_info once
the object pointed to has been deallocated, but that would be better
achieved by setting the pointer to NULL in free_sbd().
As a consequence, when the call to gfs2_sys_fs_add() fails in
gfs2_fill_super(), sdp = GFS2_SB(inode) will evaluate to NULL in iput()
-> gfs2_drop_inode(), and accessing sdp->sd_flags will be a NULL pointer
dereference.
Fix that by only setting sb->s_fs_info to NULL when actually freeing the
object pointed to in free_sbd().
Fixes: ae9f3bd8259a ("gfs2: replace sd_aspace with sd_inode")
Reported-by: syzbot+b12826218502df019f9d@syzkaller.appspotmail.com
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Pull rdma updates from Jason Gunthorpe:
"Usual collection of driver fixes:
- Small bug fixes and cleansup in hfi, hns, rxe, mlx5, mana siw
- Further ODP functionality in rxe
- Remote access MRs in mana, along with more page sizes
- Improve CM scalability with a rwlock around the agent
- More trace points for hns
- ODP hmm conversion to the new two step dma API
- Support the ethernet HW device in mana as well as the RNIC
- Cleanups:
- Use secs_to_jiffies() when appropriate
- Use ERR_CAST() instead of naked casts
- Don't use %pK in printk
- Unusued functions removed
- Allocation type matching"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (57 commits)
RDMA/cma: Fix hang when cma_netevent_callback fails to queue_work
RDMA/bnxt_re: Support extended stats for Thor2 VF
RDMA/hns: Fix endian issue in trace events
RDMA/mlx5: Avoid flexible array warning
IB/cm: Remove dead code and adjust naming
RDMA/core: Avoid hmm_dma_map_alloc() for virtual DMA devices
RDMA/rxe: Break endless pagefault loop for RO pages
RDMA/bnxt_re: Fix return code of bnxt_re_configure_cc
RDMA/bnxt_re: Fix missing error handling for tx_queue
RDMA/bnxt_re: Fix incorrect display of inactivity_cp in debugfs output
RDMA/mlx5: Add support for 200Gbps per lane speeds
RDMA/mlx5: Remove the redundant MLX5_IB_STAGE_UAR stage
RDMA/iwcm: Fix use-after-free of work objects after cm_id destruction
net: mana: Add support for auxiliary device servicing events
RDMA/mana_ib: unify mana_ib functions to support any gdma device
RDMA/mana_ib: Add support of mana_ib for RNIC and ETH nic
net: mana: Probe rdma device in mana driver
RDMA/siw: replace redundant ternary operator with just rv
RDMA/umem: Separate implicit ODP initialization from explicit ODP
RDMA/core: Convert UMEM ODP DMA mapping to caching IOVA and page linkage
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Core updates:
- move towards using the 'fwnode' handle instead of 'of_node'
(meaning 'of_node' even gets removed from i2c_board_info)
- add support for Write Disable-aware SPD eeproms
- minor stuff (use new helpers, typo fixes)
i2c-atr (address translator) updates:
- support per-channel alias pools
- added support for dynamic address translation (also adds FPC202
driver as its user)
- add 'static' and 'passthrough' flags
Cleanups and refactorings
- Many drivers switched to dev_err_probe()
- Generic cleanups applied to designware, iproc, ismt, mlxbf,
npcm7xx, qcom-geni, pasemi, and thunderx
- davinci: declare I2C mangling support among I2C features
- designware: clean up DTS handling
- designware: fix PM runtime on driver unregister
- imx: improve error logging during probe
- lpc2k: improve checks in probe error path
- xgene-slimpro: improve PCC shared memory handling
- pasemi: improve error handling in reset, smbus clear, timeouts
- tegra: validate buffer length during transfers
- wmt: convert binding to YAML format
Improvements and extended support:
- microchip-core: add SMBus support
- mlxbf: add support for repeated start in block transfers
- mlxbf: improve timer configuration
- npcm: attempt clock toggle recovery before failing init
- octeon: add support for block mode operations
- pasemi: add support for unjam device feature
- riic: add support for bus recovery
New device support:
- MediaTek Dimensity 1200 (MT6893)
- Sophgo SG2044
- Renesas RZ/V2N (R9A09G056)
- Rockchip RK3528
- AMD ISP (new driver)"
* tag 'i2c-for-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (89 commits)
i2c: Use str_read_write() helper
i2c: mlxbf: avoid 64-bit division
i2c: viai2c-wmt: Replace dev_err() with dev_err_probe() in probe function
i2c: designware: Don't warn about missing get_clk_rate_khz
i2c: designware: Invoke runtime suspend on quick slave re-registration
i2c-mlxbf: Improve I2C bus timing configuration
i2c-mlxbf: Add repeated start condition support
i2c: xgene-slimpro: Replace dev_err() with dev_err_probe() in probe function
dt-bindings: i2c: i2c-wmt: Convert to YAML
i2c: microchip-corei2c: add smbus support
i2c: mlxbf: Allow build with COMPILE_TEST
i2c: I2C_DESIGNWARE_AMDISP should depend on DRM_AMD_ISP
i2c: atr: add passthrough flag
i2c: atr: add static flag
i2c: atr: allow replacing mappings in attach_addr()
i2c: atr: deduplicate logic in attach_addr()
i2c: atr: do not create mapping in detach_addr()
i2c: atr: split up i2c_atr_get_mapping_by_addr()
i2c: atr: find_mapping() -> get_mapping()
i2c: atr: Fix lockdep for nested ATRs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"An especially linear and sparse improvement and new drivers release.
Nothing exciting. The biggest change in Bartosz changes to make
gpiochip set/get calls return error codes (something we should have
fixed ages ago but is now finally getting fixed.)
Core changes:
- Add the devres devm_pinctrl_register_mappings() call that can
register some pin control machine mappings and have them go away
with the associated device
New drivers:
- Support for the Mediatek MT6893 and MT8196 SoCs
- Support for the Renesas RZ/V2N SoC
- Support for the NXP Freescale i.MX943 SoC
Improvements:
- Per-SoC suspend/resume callbacks in the Samsung drivers
- Set all pins as input (High-Z) at probe in the MCP23S08 driver
- Switch most GPIO chips to use the setters/getters with a return
value
- EGPIO support in the Qualcomm QCM2290 driver
- Fix up the number of available GPIO lines in Qualcomm QCS8300 and
QCS615"
* tag 'pinctrl-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (82 commits)
pinctrl: freescale: Add support for imx943 pinctrl
pinctrl: core: add devm_pinctrl_register_mappings()
pinctrl: remove extern specifier for functions in machine.h
pinctrl: mediatek: eint: Fix invalid pointer dereference for v1 platforms
pinctrl: freescale: Enable driver if platform is enabled.
pinctrl: freescale: Depend imx-scu driver on OF
pinctrl: armada-37xx: propagate error from armada_37xx_pmx_set_by_name()
pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get_direction()
pinctrl: armada-37xx: propagate error from armada_37xx_pmx_gpio_set_direction()
pinctrl: armada-37xx: propagate error from armada_37xx_gpio_get()
pinctrl: armada-37xx: propagate error from armada_37xx_gpio_direction_output()
pinctrl: armada-37xx: set GPIO output value before setting direction
pinctrl: armada-37xx: use correct OUTPUT_VAL register for GPIOs > 31
pinctrl: meson: Drop unused aml_pctl_find_group_by_name()
pinctrl: at91: Fix possible out-of-boundary access
pinctrl: add stubs for OF-specific pinconf functions
pinctrl: qcom: correct the ngpios entry for QCS8300
pinctrl: qcom: correct the ngpios entry for QCS615
dt-bindings: pinctrl: qcom: correct gpio-ranges in examples for qcs8300
dt-bindings: pinctrl: qcom: correct gpio-ranges in examples for qcs615
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This has been a semi-quiet cycle. The core framework remains unchanged
this time around.
In terms of shiny new code though, we have support for the SpacemiT K1
SoC, Sophgo SG2044, and T-HEAD TH1520 VO clk drivers joining the usual
silicon players like Qualcomm, Samsung, Allwinner, and Renesas.
Surprisingly, the Qualcomm pile was smaller than usual but that is
likely because they put one SoC support inside a driver for a
different SoC that is very similar.
Other than all those new clk drivers there are the usual clk data
updates to fix parents, frequency tables, and add missing clks along
with some Kconfig changes to make compile testing simpler and even
more DT binding conversions to boot.
The exciting part is still the new SoC support like SpacemiT and
Sophgo support though, which really dominate the diffstat because they
introduce a whole new silicon vendor clk driver.
New Drivers:
- Camera clock controller driver for Qualcomm QCS8300
- DE (display engine) 3.3 clocks on Allwinner H616
- Samsung ExynosAutov920 CPU cluster CL0, CL1 and CL2 clock controllers
- Video Output (VO) subsystem clk controller in the T-HEAD TH1520 SoC
- Clock driver for Sophgo SG2044
- Clock driver for SpacemiT K1 SoC
- Renesas RZ/V2N (R9A09G056) SoC clk driver
Updates:
- Correct data in various SoC clk drivers
- Allow clkaN to be optional in the Qualcomm RPMh clock controller
driver if command db doesn't define it
- Change Kconfig options to not enable by default during compile
testing
- Add missing clks in various SoC clk drivers
- Remove some duplicate clk DT bindings and convert some more to
YAML"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (93 commits)
clk: qcom: gcc-x1e80100: Set FORCE MEM CORE for UFS clocks
clk: qcom: gcc: Set FORCE_MEM_CORE_ON for gcc_ufs_axi_clk for 8650/8750
clk: qcom: rpmh: make clkaN optional
clk: qcom: Add support for Camera Clock Controller on QCS8300
clk: rockchip: rk3528: add slab.h header include
clk: rockchip: rk3576: add missing slab.h include
clk: meson: Do not enable by default during compile testing
clk: meson-g12a: add missing fclk_div2 to spicc
clk: qcom: gcc-msm8939: Fix mclk0 & mclk1 for 24 MHz
clk: rockchip: rename gate-grf clk file
clk: rockchip: rename branch_muxgrf to branch_grf_mux
clk: sunxi-ng: ccu: add Display Engine 3.3 (DE33) support
dt-bindings: allwinner: add H616 DE33 clock binding
clk: samsung: correct clock summary for hsi1 block
dt-bindings: clock: add SM6350 QCOM video clock bindings
clk: rockchip: Pass NULL as reg pointer when registering GRF MMC clocks
clk: sunxi-ng: h616: Add LVDS reset for LCD TCON
dt-bindings: clock: sun50i-h616-ccu: Add LVDS reset
clk: rockchip: rk3036: mark ddrphy as critical
clk: rockchip: rk3036: fix implementation of usb480m clock mux
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this round, Matthew converted most of page operations to using
folio. Beyond the work, we've applied some performance tunings such as
GC and linear lookup, in addition to enhancing fault injection and
sanity checks.
Enhancements:
- large number of folio conversions
- add a control to turn on/off the linear lookup for performance
- tune GC logics for zoned block device
- improve fault injection and sanity checks
Bug fixes:
- handle error cases of memory donation
- fix to correct check conditions in f2fs_cross_rename
- fix to skip f2fs_balance_fs() if checkpoint is disabled
- don't over-report free space or inodes in statvfs
- prevent the current section from being selected as a victim during GC
- fix to calculate first_zoned_segno correctly
- fix to avoid inconsistence between SIT and SSA for zoned block device
As usual, there are several debugging patches and clean-ups as well"
* tag 'f2fs-for-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (195 commits)
f2fs: fix to correct check conditions in f2fs_cross_rename
f2fs: use d_inode(dentry) cleanup dentry->d_inode
f2fs: fix to skip f2fs_balance_fs() if checkpoint is disabled
f2fs: clean up to check bi_status w/ BLK_STS_OK
f2fs: introduce is_{meta,node}_folio
f2fs: add ckpt_valid_blocks to the section entry
f2fs: add a method for calculating the remaining blocks in the current segment in LFS mode.
f2fs: introduce FAULT_VMALLOC
f2fs: use vmalloc instead of kvmalloc in .init_{,de}compress_ctx
f2fs: add f2fs_bug_on() in f2fs_quota_read()
f2fs: add f2fs_bug_on() to detect potential bug
f2fs: remove unused sbi argument from checksum functions
f2fs: fix 32-bits hexademical number in fault injection doc
f2fs: don't over-report free space or inodes in statvfs
f2fs: return bool from __write_node_folio
f2fs: simplify return value handling in f2fs_fsync_node_pages
f2fs: always unlock the page in f2fs_write_single_data_page
f2fs: remove wbc->for_reclaim handling
f2fs: return bool from __f2fs_write_meta_folio
f2fs: fix to return correct error number in f2fs_sync_node_pages()
...
|
|
Commit 7ba8df47810f073 ("asm-generic: Make simd.h more resilient")
causes a build error for PREEMPT_RT kernels:
CC lib/crypto/sha256.o
In file included from ./include/asm-generic/simd.h:6,
from ./arch/loongarch/include/generated/asm/simd.h:1,
from ./include/crypto/internal/simd.h:9,
from ./include/crypto/internal/sha2.h:6,
from lib/crypto/sha256.c:15:
./include/asm-generic/simd.h: In function 'may_use_simd':
./include/linux/preempt.h:111:34: error: 'current' undeclared (first use in this function)
111 | # define softirq_count() (current->softirq_disable_cnt & SOFTIRQ_MASK)
| ^~~~~~~
./include/linux/preempt.h:112:82: note: in expansion of macro 'softirq_count'
112 | # define irq_count() ((preempt_count() & (NMI_MASK | HARDIRQ_MASK)) | softirq_count())
| ^~~~~~~~~~~~~
./include/linux/preempt.h:143:34: note: in expansion of macro 'irq_count'
143 | #define in_interrupt() (irq_count())
| ^~~~~~~~~
./include/asm-generic/simd.h:18:17: note: in expansion of macro 'in_interrupt'
18 | return !in_interrupt();
| ^~~~~~~~~~~~
So add sched.h inclusion in simd.h to fix it.
Fixes: 7ba8df47810f073 ("asm-generic: Make simd.h more resilient")
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
When the s390 SHA-256 code is built as a loadable module, name it
sha256-s390.ko instead of sha256.ko. This avoids a module name
collision with crypto/sha256.ko and makes it consistent with the other
architectures.
We should consider making a single module provide all the SHA-256
library code, which would prevent issues like this. But for now this is
the fix that's needed.
Fixes: b9eac03edcf8 ("crypto: s390/sha256 - implement library instead of shash")
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Closes: https://lore.kernel.org/r/20250529110526.6d2959a9.alex.williamson@redhat.com/
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Dan reports that iterating over a device ITEs can legitimately lead
to a NULL pointer, and that the NULL check is placed *after* the
pointer has already been dereferenced.
Hoist the pointer check as early as possible and be done with it.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 30deb51a677b ("KVM: arm64: vgic-its: Add debugfs interface to expose ITS tables")
Link: https://lore.kernel.org/r/aDBylI1YnjPatAbr@stanley.mountain
Cc: Jing Zhang <jingzhangos@google.com>
Link: https://lore.kernel.org/r/20250530091647.1152489-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
syzkaller has found another ugly race in the VGIC, this time dealing
with VGIC creation. Since kvm_vgic_create() doesn't sufficiently protect
against in-flight vCPU creations, it is possible to get a vCPU into the
kernel w/ an in-kernel VGIC but no allocation of private IRQs:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000d20
Mem abort info:
ESR = 0x0000000096000046
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x06: level 2 translation fault
Data abort info:
ISV = 0, ISS = 0x00000046, ISS2 = 0x00000000
CM = 0, WnR = 1, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000000103e4f000
[0000000000000d20] pgd=0800000102e1c403, p4d=0800000102e1c403, pud=0800000101146403, pmd=0000000000000000
Internal error: Oops: 0000000096000046 [#1] PREEMPT SMP
CPU: 9 UID: 0 PID: 246 Comm: test Not tainted 6.14.0-rc6-00097-g0c90821f5db8 #16
Hardware name: linux,dummy-virt (DT)
pstate: 814020c5 (Nzcv daIF +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : _raw_spin_lock_irqsave+0x34/0x8c
lr : kvm_vgic_set_owner+0x54/0xa4
sp : ffff80008086ba20
x29: ffff80008086ba20 x28: ffff0000c19b5640 x27: 0000000000000000
x26: 0000000000000000 x25: ffff0000c4879bd0 x24: 000000000000001e
x23: 0000000000000000 x22: 0000000000000000 x21: ffff0000c487af80
x20: ffff0000c487af18 x19: 0000000000000000 x18: 0000001afadd5a8b
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000001
x14: ffff0000c19b56c0 x13: 0030c9adf9d9889e x12: ffffc263710e1908
x11: 0000001afb0d74f2 x10: e0966b840b373664 x9 : ec806bf7d6a57cd5
x8 : ffff80008086b980 x7 : 0000000000000001 x6 : 0000000000000001
x5 : 0000000080800054 x4 : 4ec4ec4ec4ec4ec5 x3 : 0000000000000000
x2 : 0000000000000001 x1 : 0000000000000000 x0 : 0000000000000d20
Call trace:
_raw_spin_lock_irqsave+0x34/0x8c (P)
kvm_vgic_set_owner+0x54/0xa4
kvm_timer_enable+0xf4/0x274
kvm_arch_vcpu_run_pid_change+0xe0/0x380
kvm_vcpu_ioctl+0x93c/0x9e0
__arm64_sys_ioctl+0xb4/0xec
invoke_syscall+0x48/0x110
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x30/0xd0
el0t_64_sync_handler+0x10c/0x138
el0t_64_sync+0x198/0x19c
Code: b9000841 d503201f 52800001 52800022 (88e17c02)
---[ end trace 0000000000000000 ]---
Plug the race by explicitly checking for an in-progress vCPU creation
and failing kvm_vgic_create() when that's the case. Add some comments to
document all the things kvm_vgic_create() is trying to guard against
too.
Reported-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Tested-by: Alexander Potapenko <glider@google.com>
Link: https://lore.kernel.org/r/20250523194722.4066715-6-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
KVM's interrupt infrastructure is dodgy at best, allowing for some ugly
'off label' usage of the various UAPIs. In one example, userspace can
change the routing entry of a particular "GSI" after configuring
irqbypass with KVM_IRQFD. KVM/arm64 is oblivious to this, and winds up
preserving the stale translation in cases where vLPIs are configured.
Honor userspace's intentions and tear down the vLPI mapping if affected
by a "GSI" routing change. Make no attempt to reconstruct vLPIs if the
new target is an MSI and just fall back to software injection.
Tested-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250523194722.4066715-5-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The virtual mapping and "GSI" routing of a particular vLPI is subject to
change in response to the guest / userspace. This can be pretty annoying
to deal with when KVM needs to track the physical state that's managed
for vLPI direct injection.
Make vgic_v4_unset_forwarding() resilient by using the host IRQ to
resolve the vgic IRQ. Since this uses the LPI xarray directly, finding
the ITS by doorbell address + grabbing it's its_lock is no longer
necessary. Note that matching the right ITS / ITE is already handled in
vgic_v4_set_forwarding(), and unless there's a bug in KVM's VGIC ITS
emulation the virtual mapping that should remain stable for the lifetime
of the vLPI mapping.
Tested-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250523194722.4066715-4-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Though undocumented, KVM generally protects the translation of a vLPI
with the its_lock. While this makes perfectly good sense, as the ITS
itself contains the guest translation, an upcoming change will require
twiddling the vLPI mapping in an atomic context.
Switch to using the vIRQ's irq_lock to protect the translation. Use of
the its_lock in vgic_v4_unset_forwarding() is preserved for now as it
still needs to walk the ITS.
Tested-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250523194722.4066715-3-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The locking dance is about to get more interesting, switch the its_lock
over to a lock guard to make it a bit easier to handle.
Tested-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250523194722.4066715-2-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
When handling a TLBI VA* instruction that potentially targets a
VNCR page mapping, we fail to mask out the top bits that contain
the ASID and TTL fields, hence potentially failing the VA check
in the TLB code.
An additional wrinkle is that we fail to sign extend the VA,
again leading to failed VA checks.
Fix both in one go by sign-extending the VA from bit 48, making
it comparable to the way we interpret VNCR_EL2.BADDR.
Fixes: 4ffa72ad8f37e ("KVM: arm64: nv: Add S1 TLB invalidation primitive for VNCR_EL2")
Link: https://lore.kernel.org/r/20250525175759.780891-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Broonie reports that fed55f49fad18 ("arm64: errata: Work around
AmpereOne's erratum AC04_CPU_23") breaks one of the vdso selftests
(vdso_test_chacha) as it indirectly drags asm/sysreg.h.
It is rather unfortunate (and worrying) that userspace gets built
with non-UAPI headers. In any case, paper over the issue by dragging
linux/kconfig.h in asm/sysreg.h. It is the right thing to do, at
least from the kernel perspective.
Reported-by: Mark Brown <broonie@kernel.org>
Fixes: fed55f49fad18 ("arm64: errata: Work around AmpereOne's erratum AC04_CPU_23")
Link: https://lore.kernel.org/r/aDCDGZ-G-nCP3hJI@finisterre.sirena.org.uk
Cc: D Scott Phillips <scott@os.amperecomputing.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250523170208.530818-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.16 (take five)
- Reduce I2C2 clock frequency on the RZ/G3E SMARC SoM.
* tag 'renesas-dts-for-v6.16-tag5' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: rzg3e-smarc-som: Reduce I2C2 clock frequency
Link: https://lore.kernel.org/r/cover.1748355530.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Update my mail address to my new @kernel.org one and also add a mailmap
entry to make sure everything gets sent there for easier filtering.
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/20250528221718.45204-1-sven@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
When user requests a connectable file handle explicitly with the
AT_HANDLE_CONNECTABLE flag, fail the request if filesystem (e.g. nfs)
does not know how to decode a connected non-dir dentry.
Fixes: c374196b2b9f ("fs: name_to_handle_at() support for "explicit connectable" file handles")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/20250525104731.1461704-1-amir73il@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (smartpqi, ufs, lpfc, scsi_debug, target,
hisi_sas) with the only substantive core change being the removal of
the stream_status member from the scsi_stream_status_header (to get
rid of flex array members)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (77 commits)
scsi: target: core: Constify struct target_opcode_descriptor
scsi: target: core: Constify enabled() in struct target_opcode_descriptor
scsi: hisi_sas: Fix warning detected by sparse
scsi: mpt3sas: Fix _ctl_get_mpt_mctp_passthru_adapter() to return IOC pointer
scsi: sg: Remove unnecessary NULL check before unregister_sysctl_table()
scsi: ufs: mcq: Delete ufshcd_release_scsi_cmd() in ufshcd_mcq_abort()
scsi: ufs: qcom: dt-bindings: Document the SM8750 UFS Controller
scsi: mvsas: Fix typos in SAS/SATA VSP register comments
scsi: fnic: Replace memset() with eth_zero_addr()
scsi: ufs: core: Support updating device command timeout
scsi: ufs: core: Change hwq_id type and value
scsi: ufs: core: Increase the UIC command timeout further
scsi: zfcp: Simplify workqueue allocation
scsi: ufs: core: Print error value as hex format in ufshcd_err_handler()
scsi: sd: Remove the stream_status member from scsi_stream_status_header
scsi: docs: Clean up some style in scsi_mid_low_api
scsi: core: Remove unused scsi_dev_info_list_del_keyed()
scsi: isci: Remove unused sci_remote_device_reset()
scsi: scsi_debug: Reduce DEF_ATOMIC_WR_MAX_LENGTH
scsi: smartpqi: Delete a stray tab in pqi_is_parity_write_stream()
...
|
|
Mark files as repr(transparent) to ensure identical layout between C and Rust.
* patches from https://lore.kernel.org/20250527204636.12573-1-pekkarr@protonmail.com:
rust: file: improve safety comments
rust: file: mark `LocalFile` as `repr(transparent)`
Link: https://lore.kernel.org/20250527204636.12573-1-pekkarr@protonmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Some of the safety comments in `LocalFile`'s methods incorrectly refer to
the `File` type instead of `LocalFile`, so fix them to use the correct
type.
Also add missing Markdown code spans around lifetimes in the safety
comments, i.e. change 'a to `'a`.
Link: https://github.com/Rust-for-Linux/linux/issues/1165
Signed-off-by: Pekka Ristola <pekkarr@protonmail.com>
Link: https://lore.kernel.org/20250527204636.12573-2-pekkarr@protonmail.com
Reviewed-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Unsafe code in `LocalFile`'s methods assumes that the type has the same
layout as the inner `bindings::file`. This is not guaranteed by the default
struct representation in Rust, but requires specifying the `transparent`
representation.
The `File` struct (which also wraps `bindings::file`) is already marked as
`repr(transparent)`, so this change makes their layouts equivalent.
Fixes: 851849824bb5 ("rust: file: add Rust abstraction for `struct file`")
Closes: https://github.com/Rust-for-Linux/linux/issues/1165
Signed-off-by: Pekka Ristola <pekkarr@protonmail.com>
Link: https://lore.kernel.org/20250527204636.12573-1-pekkarr@protonmail.com
Reviewed-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Commit 6be3e21d25ca ("fs/dax: don't skip locked entries when scanning
entries") introduced a new function, wait_entry_unlocked_exclusive(),
which waits for the current entry to become unlocked without advancing
the XArray iterator state.
Waiting for the entry to become unlocked requires dropping the XArray
lock. This requires calling xas_pause() prior to dropping the lock
which leaves the xas in a suitable state for the next iteration. However
this has the side-effect of advancing the xas state to the next index.
Normally this isn't an issue because xas_for_each() contains code to
detect this state and thus avoid advancing the index a second time on
the next loop iteration.
However both callers of and wait_entry_unlocked_exclusive() itself
subsequently use the xas state to reload the entry. As xas_pause()
updated the state to the next index this will cause the current entry
which is being waited on to be skipped. This caused the following
warning to fire intermittently when running xftest generic/068 on an XFS
filesystem with FS DAX enabled:
[ 35.067397] ------------[ cut here ]------------
[ 35.068229] WARNING: CPU: 21 PID: 1640 at mm/truncate.c:89 truncate_folio_batch_exceptionals+0xd8/0x1e0
[ 35.069717] Modules linked in: nd_pmem dax_pmem nd_btt nd_e820 libnvdimm
[ 35.071006] CPU: 21 UID: 0 PID: 1640 Comm: fstest Not tainted 6.15.0-rc7+ #77 PREEMPT(voluntary)
[ 35.072613] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/204
[ 35.074845] RIP: 0010:truncate_folio_batch_exceptionals+0xd8/0x1e0
[ 35.075962] Code: a1 00 00 00 f6 47 0d 20 0f 84 97 00 00 00 4c 63 e8 41 39 c4 7f 0b eb 61 49 83 c5 01 45 39 ec 7e 58 42 f68
[ 35.079522] RSP: 0018:ffffb04e426c7850 EFLAGS: 00010202
[ 35.080359] RAX: 0000000000000000 RBX: ffff9d21e3481908 RCX: ffffb04e426c77f4
[ 35.081477] RDX: ffffb04e426c79e8 RSI: ffffb04e426c79e0 RDI: ffff9d21e34816e8
[ 35.082590] RBP: ffffb04e426c79e0 R08: 0000000000000001 R09: 0000000000000003
[ 35.083733] R10: 0000000000000000 R11: 822b53c0f7a49868 R12: 000000000000001f
[ 35.084850] R13: 0000000000000000 R14: ffffb04e426c78e8 R15: fffffffffffffffe
[ 35.085953] FS: 00007f9134c87740(0000) GS:ffff9d22abba0000(0000) knlGS:0000000000000000
[ 35.087346] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 35.088244] CR2: 00007f9134c86000 CR3: 000000040afff000 CR4: 00000000000006f0
[ 35.089354] Call Trace:
[ 35.089749] <TASK>
[ 35.090168] truncate_inode_pages_range+0xfc/0x4d0
[ 35.091078] truncate_pagecache+0x47/0x60
[ 35.091735] xfs_setattr_size+0xc7/0x3e0
[ 35.092648] xfs_vn_setattr+0x1ea/0x270
[ 35.093437] notify_change+0x1f4/0x510
[ 35.094219] ? do_truncate+0x97/0xe0
[ 35.094879] do_truncate+0x97/0xe0
[ 35.095640] path_openat+0xabd/0xca0
[ 35.096278] do_filp_open+0xd7/0x190
[ 35.096860] do_sys_openat2+0x8a/0xe0
[ 35.097459] __x64_sys_openat+0x6d/0xa0
[ 35.098076] do_syscall_64+0xbb/0x1d0
[ 35.098647] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 35.099444] RIP: 0033:0x7f9134d81fc1
[ 35.100033] Code: 75 57 89 f0 25 00 00 41 00 3d 00 00 41 00 74 49 80 3d 2a 26 0e 00 00 74 6d 89 da 48 89 ee bf 9c ff ff ff5
[ 35.102993] RSP: 002b:00007ffcd41e0d10 EFLAGS: 00000202 ORIG_RAX: 0000000000000101
[ 35.104263] RAX: ffffffffffffffda RBX: 0000000000000242 RCX: 00007f9134d81fc1
[ 35.105452] RDX: 0000000000000242 RSI: 00007ffcd41e1200 RDI: 00000000ffffff9c
[ 35.106663] RBP: 00007ffcd41e1200 R08: 0000000000000000 R09: 0000000000000064
[ 35.107923] R10: 00000000000001a4 R11: 0000000000000202 R12: 0000000000000066
[ 35.109112] R13: 0000000000100000 R14: 0000000000100000 R15: 0000000000000400
[ 35.110357] </TASK>
[ 35.110769] irq event stamp: 8415587
[ 35.111486] hardirqs last enabled at (8415599): [<ffffffff8d74b562>] __up_console_sem+0x52/0x60
[ 35.113067] hardirqs last disabled at (8415610): [<ffffffff8d74b547>] __up_console_sem+0x37/0x60
[ 35.114575] softirqs last enabled at (8415300): [<ffffffff8d6ac625>] handle_softirqs+0x315/0x3f0
[ 35.115933] softirqs last disabled at (8415291): [<ffffffff8d6ac811>] __irq_exit_rcu+0xa1/0xc0
[ 35.117316] ---[ end trace 0000000000000000 ]---
Fix this by using xas_reset() instead, which is equivalent in
implementation to xas_pause() but does not advance the XArray state.
Fixes: 6be3e21d25ca ("fs/dax: don't skip locked entries when scanning entries")
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Link: https://lore.kernel.org/20250523043749.1460780-1-apopple@nvidia.com
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: "Matthew Wilcow (Oracle)" <willy@infradead.org>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Pull VFIO updates from Alex Williamson:
- Remove an outdated DMA unmap optimization that relies on a feature
only implemented in AMDv1 page tables. (Jason Gunthorpe)
- Fix various migration issues in the hisi_acc_vfio_pci variant driver,
including use of a wrong DMA address requiring an update to the
migration data structure, resending task completion interrupt after
migration to re-sync queues, fixing a write-back cache sequencing
issue, fixing a driver unload issue, behaving correctly when the
guest driver is not loaded, and avoiding to squash errors from
sub-functions. (Longfang Liu)
- mlx5-vfio-pci variant driver update to make use of the new two-step
DMA API for migration, using a page array directly rather than using
a page list mapped across a scatter list. (Leon Romanovsky)
- Fix an incorrect loop index used when unwinding allocation of dirty
page bitmaps on error, resulting in temporary failure in freeing
unused bitmaps. (Li RongQing)
* tag 'vfio-v6.16-rc1' of https://github.com/awilliam/linux-vfio:
vfio/type1: Fix error unwind in migration dirty bitmap allocation
vfio/mlx5: Enable the DMA link API
vfio/mlx5: Rewrite create mkey flow to allow better code reuse
vfio/mlx5: Explicitly use number of pages instead of allocated length
hisi_acc_vfio_pci: update function return values.
hisi_acc_vfio_pci: bugfix live migration function without VF device driver
hisi_acc_vfio_pci: bugfix the problem of uninstalling driver
hisi_acc_vfio_pci: bugfix cache write-back issue
hisi_acc_vfio_pci: add eq and aeq interruption restore
hisi_acc_vfio_pci: fix XQE dma address error
vfio/type1: Remove Fine Grained Superpages detection
|
|
Pull IPMI updates from Corey Minyard:
"Restructure the IPMI driver.
This is a restructure of the IPMI driver, mostly to remove SRCU. The
locking had issues, and they were not going to be straightforward to
fix. Plus it used tons of memory and was generally a pain.
Most of this moves handling of messages out of bh and interrupt
context and runs it in thread context. Then getting rid of SRCU is
easy.
This also has a minor cleanup to remove a warning on newer GCCs and to
fix some documentation"
* tag 'for-linus-6.16-1' of https://github.com/cminyard/linux-ipmi: (26 commits)
docs: ipmi: fix spelling and grammar mistakes
ipmi:msghandler: Fix potential memory corruption in ipmi_create_user()
ipmi:watchdog: Use the new interface for panic messages
ipmi:msghandler: Export and fix panic messaging capability
Documentation:ipmi: Remove comments about interrupt level
ipmi:ssif: Fix a shutdown race
ipmi:msghandler: Don't deliver messages to deleted users
ipmi:si: Rework startup of IPMI devices
ipmi:msghandler: Add a error return from unhandle LAN cmds
ipmi:msghandler: Shut down lower layer first at unregister
ipmi:msghandler: Remove proc_fs.h
ipmi:msghandler: Don't check for shutdown when returning responses
ipmi:msghandler: Don't acquire a user refcount for queued messages
ipmi:msghandler: Fix locking around users and interfaces
ipmi:msghandler: Remove some user level processing in panic mode
ipmi: Add a note about the pretimeout callback
ipmi:watchdog: Change lock to mutex
ipmi:msghandler: Remove srcu for the ipmi_interfaces list
ipmi:msghandler: Remove srcu from the ipmi user structure
ipmi:msghandler: Use the system_wq, not system_bh_wq
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm
Pull trusted security manager (TSM) updates from Dan Williams:
- Add a general sysfs scheme for publishing "Measurement" values
provided by the architecture's TEE Security Manager. Use it to
publish TDX "Runtime Measurement Registers" ("RTMRs") that either
maintain a hash of stored values (similar to a TPM PCR) or provide
statically provisioned data. These measurements are validated by a
relying party.
- Reorganize the drivers/virt/coco/ directory for "host" and "guest"
shared infrastructure.
- Fix a configfs-tsm-report unregister bug
- With CONFIG_TSM_MEASUREMENTS joining CONFIG_TSM_REPORTS and in
anticipation of more shared "TSM" infrastructure arriving, rename the
maintainer entry to "TRUSTED SECURITY MODULE (TSM) INFRASTRUCTURE".
* tag 'tsm-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm:
tsm-mr: Fix init breakage after bin_attrs constification by scoping non-const pointers to init phase
sample/tsm-mr: Fix missing static for sample_report
virt: tdx-guest: Transition to scoped_cond_guard for mutex operations
virt: tdx-guest: Refactor and streamline TDREPORT generation
virt: tdx-guest: Expose TDX MRs as sysfs attributes
x86/tdx: tdx_mcall_get_report0: Return -EBUSY on TDCALL_OPERAND_BUSY error
x86/tdx: Add tdx_mcall_extend_rtmr() interface
tsm-mr: Add tsm-mr sample code
tsm-mr: Add TVM Measurement Register support
configfs-tsm-report: Fix NULL dereference of tsm_ops
coco/guest: Move shared guest CC infrastructure to drivers/virt/coco/guest/
configfs-tsm: Namespace TSM report symbols
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull Intel software guard extension (SGX) updates from Dave Hansen:
"A couple of x86/sgx changes.
The first one is a no-brainer to use the (simple) SHA-256 library.
For the second one, some folks doing testing noticed that SGX systems
under memory pressure were inducing fatal machine checks at pretty
unnerving rates, despite the SGX code having _some_ awareness of
memory poison.
It turns out that the SGX reclaim path was not checking for poison
_and_ it always accesses memory to copy it around. Make sure that
poisoned pages are not reclaimed"
* tag 'x86_sgx_for_6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Prevent attempts to reclaim poisoned pages
x86/sgx: Use SHA-256 library API instead of crypto_shash API
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Have module addresses get updated in the persistent ring buffer
The addresses of the modules from the previous boot are saved in the
persistent ring buffer. If the same modules are loaded and an address
is in the old buffer points to an address that was both saved in the
persistent ring buffer and is loaded in memory, shift the address to
point to the address that is loaded in memory in the trace event.
- Print function names for irqs off and preempt off callsites
When ignoring the print fmt of a trace event and just printing the
fields directly, have the fields for preempt off and irqs off events
still show the function name (via kallsyms) instead of just showing
the raw address.
- Clean ups of the histogram code
The histogram functions saved over 800 bytes on the stack to process
events as they come in. Instead, create per-cpu buffers that can hold
this information and have a separate location for each context level
(thread, softirq, IRQ and NMI).
Also add some more comments to the code.
- Add "common_comm" field for histograms
Add "common_comm" that uses the current->comm as a field in an event
histogram and acts like any of the other fields of the event.
- Show "subops" in the enabled_functions file
When the function graph infrastructure is used, a subsystem has a
"subops" that it attaches its callback function to. Instead of the
enabled_functions just showing a function calling the function that
calls the subops functions, also show the subops functions that will
get called for that function too.
- Add "copy_trace_marker" option to instances
There are cases where an instance is created for tooling to write
into, but the old tooling has the top level instance hardcoded into
the application. New tools want to consume the data from an instance
and not the top level buffer. By adding a copy_trace_marker option,
whenever the top instance trace_marker is written into, a copy of it
is also written into the instance with this option set. This allows
new tools to read what old tools are writing into the top buffer.
If this option is cleared by the top instance, then what is written
into the trace_marker is not written into the top instance. This is a
way to redirect the trace_marker writes into another instance.
- Have tracepoints created by DECLARE_TRACE() use trace_<name>_tp()
If a tracepoint is created by DECLARE_TRACE() instead of
TRACE_EVENT(), then it will not be exposed via tracefs. Currently
there's no way to differentiate in the kernel the tracepoint
functions between those that are exposed via tracefs or not. A
calling convention has been made manually to append a "_tp" prefix
for events created by DECLARE_TRACE(). Instead of doing this
manually, force it so that all DECLARE_TRACE() events have this
notation.
- Use __string() for task->comm in some sched events
Instead of hardcoding the comm to be TASK_COMM_LEN in some of the
scheduler events use __string() which makes it dynamic. Note, if
these events are parsed by user space it they may break, and the
event may have to be converted back to the hardcoded size.
- Have function graph "depth" be unsigned to the user
Internally to the kernel, the "depth" field of the function graph
event is signed due to -1 being used for end of boundary. What
actually gets recorded in the event itself is zero or positive.
Reflect this to user space by showing "depth" as unsigned int and be
consistent across all events.
- Allow an arbitrary long CPU string to osnoise_cpus_write()
The filtering of which CPUs to write to can exceed 256 bytes. If a
machine has 256 CPUs, and the filter is to filter every other CPU,
the write would take a string larger than 256 bytes. Instead of using
a fixed size buffer on the stack that is 256 bytes, allocate it to
handle what is passed in.
- Stop having ftrace check the per-cpu data "disabled" flag
The "disabled" flag in the data structure passed to most ftrace
functions is checked to know if tracing has been disabled or not.
This flag was added back in 2008 before the ring buffer had its own
way to disable tracing. The "disable" flag is now not always set when
needed, and the ring buffer flag should be used in all locations
where the disabled is needed. Since the "disable" flag is redundant
and incorrect, stop using it. Fix up some locations that use the
"disable" flag to use the ring buffer info.
- Use a new tracer_tracing_disable/enable() instead of data->disable
flag
There's a few cases that set the data->disable flag to stop tracing,
but this flag is not consistently used. It is also an on/off switch
where if a function set it and calls another function that sets it,
the called function may incorrectly enable it.
Use a new trace_tracing_disable() and tracer_tracing_enable() that
uses a counter and can be nested. These use the ring buffer flags
which are always checked making the disabling more consistent.
- Save the trace clock in the persistent ring buffer
Save what clock was used for tracing in the persistent ring buffer
and set it back to that clock after a reboot.
- Remove unused reference to a per CPU data pointer in mmiotrace
functions
- Remove unused buffer_page field from trace_array_cpu structure
- Remove more strncpy() instances
- Other minor clean ups and fixes
* tag 'trace-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (36 commits)
tracing: Fix compilation warning on arm32
tracing: Record trace_clock and recover when reboot
tracing/sched: Use __string() instead of fixed lengths for task->comm
tracepoint: Have tracepoints created with DECLARE_TRACE() have _tp suffix
tracing: Cleanup upper_empty() in pid_list
tracing: Allow the top level trace_marker to write into another instances
tracing: Add a helper function to handle the dereference arg in verifier
tracing: Remove unnecessary "goto out" that simply returns ret is trigger code
tracing: Fix error handling in event_trigger_parse()
tracing: Rename event_trigger_alloc() to trigger_data_alloc()
tracing: Replace deprecated strncpy() with strscpy() for stack_trace_filter_buf
tracing: Remove unused buffer_page field from trace_array_cpu structure
tracing: Use atomic_inc_return() for updating "disabled" counter in irqsoff tracer
tracing: Convert the per CPU "disabled" counter to local from atomic
tracing: branch: Use trace_tracing_is_on_cpu() instead of "disabled" field
ring-buffer: Add ring_buffer_record_is_on_cpu()
tracing: Do not use per CPU array_buffer.data->disabled for cpumask
ftrace: Do not disabled function graph based on "disabled" field
tracing: kdb: Use tracer_tracing_on/off() instead of setting per CPU disabled
tracing: Use tracer_tracing_disable() instead of "disabled" field for ftrace_dump_one()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing tools updates from Steven Rostedt:
- Set distinctive value for failed tests
When running "make check" that performs tests on rtla the failure is
checked by examining the output. Instead have the tool return an
error status if it exceeds the threadhold.
- Define __NR_sched_setattr for LoongArch
Define __NR_sched_setattr to allow this to build for LoongArch.
- Define _GNU_SOURCE for timerlat_bpf.c
Due to modifications of struct sched_attr in utils.h when _GNU_SOURCE
is not defined, this can cause errors for timerlat_bpf_init() and
breakage in BPF sample collection mode.
* tag 'trace-tools-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rtla: Define _GNU_SOURCE in timerlat_bpf.c
rtla: Define __NR_sched_setattr for LoongArch
rtla: Set distinctive exit value for failed tests
|
|
ACPICA commit b90d0d65ec97ff8279ad826f4102e0d31c5f662a
I mistakenly replaced strncpy() with memcpy() in commit ebf27765421c
("ACPICA: Replace strncpy() with memcpy()"), not realizing the entire
context behind *why* strncpy() was used.
In this safer implementation of strncpy(), it does not make
sense to use memcpy() only to null-terminate strings passed to
acpi_ut_safe_strncpy() one byte early.
The consequences of doing so are understandably *bad*, as was
evident by the kernel test bot reporting problems [1].
Fixes: ebf27765421c ("ACPICA: Replace strncpy() with memcpy()")
Link: https://lore.kernel.org/all/202505081033.50e45ff4-lkp@intel.com [1]
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202505081033.50e45ff4-lkp@intel.com
Link: https://github.com/acpica/acpica/commit/b90d0d65
Signed-off-by: Ahmed Salem <x0rw3ll@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/12685690.O9o76ZdvQC@rjwysocki.net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull ext2 and isofs updates from Jan Kara:
- isofs fix of handling of particularly formatted Rock Ridge timestamps
- Add deprecation notice about support of DAX in ext2 filesystem driver
* tag 'fs_for_v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext2: Deprecate DAX
isofs: fix Y2038 and Y2156 issues in Rock Ridge TF entry
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
"Two fanotify cleanups and support for watching namespace-owned
filesystems by namespace admins (most useful for being able to watch
for new mounts / unmounts happening within a user namespace)"
* tag 'fsnotify_for_v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fanotify: support watching filesystems and mounts inside userns
fanotify: remove redundant permission checks
fanotify: Drop use of flex array in fanotify_fh
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform drivers updates from Ilpo Järvinen:
"The changes are mostly business as usual. Besides pdx86 changes, there
are a few power supply changes needed for related pdx86 features, move
of oxpec driver from hwmon (oxp-sensors) to pdx86, and one FW version
warning to hid-asus.
Highlights:
- alienware-wmi-wmax:
- Add HWMON support
- Add ABI and admin-guide documentation
- Expose GPIO debug methods through debug FS
- Support manual fan control and "custom" thermal profile
- amd/hsmp:
- Add sysfs files to show HSMP telemetry
- Report power readings and limits via hwmon
- amd/isp4: Add AMD ISP platform config for OV05C10
- asus-wmi:
- Refactor Ally suspend/resume to work better with older FW
- hid-asus: check ROG Ally MCU version and warn about old FW versions
- dasharo-acpi:
- Add driver for Dasharo devices supporting fans and temperatures
monitoring
- dell-ddv:
- Expose the battery health and manufacture date to userspace
using power supply extensions
- Implement the battery matching algorithm
- dell-pc:
- Improve error propagation
- Use faux device
- int3472:
- Add delays to avoid GPIO regulator spikes
- Add handshake pin support
- Make regulator supply name configurable and allow registering
more than 1 GPIO regulator
- Map mt9m114 powerdown pin to powerenable
- intel/pmc: Add separate SSRAM Telemetry driver
- intel-uncore-freq: Add attributes to show agent types and die ID
- ISST:
- Support SST-TF revision 2 (allows more cores per bucket)
- Support SST-PP revision 2 (fabric 1 frequencies)
- Remove unnecessary SST MSRs restore (the package retains MSRs
despite CPU offlining)
- mellanox: Add support for SN2201, SN4280, SN5610, and SN5640
- mellanox: mlxbf-pmc: Support additional PMC blocks
- oxpec:
- Add OneXFly variants
- Add support for charge limit, charge thresholds, and turbo LED
- Distinguish current X1 variants to avoid unwanted matching to
new variants
- Follow hwmon conventions
- Move from hwmon/oxp-sensors to platform/x86 to match the
enlarged scope
- power supply:
- Add inhibit-charge-awake (needed by oxpec)
- Add additional battery health status values ("blown fuse" and
"cell imbalance") (needed by dell-ddv)
- powerwell-ec: Add driver for Portwell EC supporting GPIO and watchdog
- thinkpad-acpi: Support camera shutter switch hotkey
- tuxedo: Add virtual LampArray for TUXEDO NB04 devices
- tools/power/x86/intel-speed-select:
- Support displaying SST-PP revision 2 fields
- Skip uncore frequency update on newer generations of CPUs
- Miscellaneous cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (112 commits)
thermal/drivers/acerhdf: Constify struct thermal_zone_device_ops
platform/x86/amd/hsmp: fix building with CONFIG_HWMON=m
platform/x86: asus-wmi: fix build without CONFIG_SUSPEND
docs: ABI: Fix "aassociated" to "associated"
platform/x86: Add AMD ISP platform config for OV05C10
Documentation: admin-guide: pm: Add documentation for die_id
platform/x86/intel-uncore-freq: Add attributes to show die_id
platform/x86/intel: power-domains: Add interface to get Linux die ID
Documentation: admin-guide: pm: Add documentation for agent_types
platform/x86/intel-uncore-freq: Add attributes to show agent types
platform/x86/tuxedo: Prevent invalid Kconfig state
platform/x86: dell-ddv: Expose the battery health to userspace
platform/x86: dell-ddv: Expose the battery manufacture date to userspace
platform/x86: dell-ddv: Implement the battery matching algorithm
power: supply: core: Add additional health status values
platform/x86/amd/hsmp: acpi: Add sysfs files to display HSMP telemetry
platform/x86/amd/hsmp: Report power via hwmon sensors
platform/x86/amd/hsmp: Use a single DRIVER_VERSION for all hsmp modules
platform/mellanox: mlxreg-dpu: Fix smatch warnings
platform: mellanox: nvsw-sn2200: Fix .items in nvsw_sn2201_busbar_hotplug
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Greg KH:
"Here are the driver core / kernfs changes for 6.16-rc1.
Not a huge number of changes this development cycle, here's the
summary of what is included in here:
- kernfs locking tweaks, pushing some global locks down into a per-fs
image lock
- rust driver core and pci device bindings added for new features.
- sysfs const work for bin_attributes.
The final churn of switching away from and removing the
transitional struct members, "read_new", "write_new" and
"bin_attrs_new" will come after the merge window to avoid
unnecesary merge conflicts.
- auxbus device creation helpers added
- fauxbus fix for creating sysfs files after the probe completed
properly
- other tiny updates for driver core things.
All of these have been in linux-next for over a week with no reported
issues"
* tag 'driver-core-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
kernfs: Relax constraint in draining guard
Documentation: embargoed-hardware-issues.rst: Remove myself
drivers: hv: fix up const issue with vmbus_chan_bin_attrs
firmware_loader: use SHA-256 library API instead of crypto_shash API
docs: debugfs: do not recommend debugfs_remove_recursive
PM: wakeup: Do not expose 4 device wakeup source APIs
kernfs: switch global kernfs_rename_lock to per-fs lock
kernfs: switch global kernfs_idr_lock to per-fs lock
driver core: auxiliary bus: Fix IS_ERR() vs NULL mixup in __devm_auxiliary_device_create()
sysfs: constify attribute_group::bin_attrs
sysfs: constify bin_attribute argument of bin_attribute::read/write()
software node: Correct a OOB check in software_node_get_reference_args()
devres: simplify devm_kstrdup() using devm_kmemdup()
platform: replace magic number with macro PLATFORM_DEVID_NONE
component: do not try to unbind unbound components
driver core: auxiliary bus: add device creation helpers
driver core: faux: Add sysfs groups after probing
|
|
On the SoCFPGA platform, the INTTEST register supports only 16-bit writes.
A 32-bit write triggers an SError to the CPU so do 16-bit accesses only.
[ bp: AI-massage the commit message. ]
Fixes: c7b4be8db8bc ("EDAC, altera: Add Arria10 OCRAM ECC support")
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Cc: stable@kernel.org
Link: https://lore.kernel.org/20250527145707.25458-1-matthew.gerlach@altera.com
|
|
Revert commit 96040f7273e2 ("x86/smp: Eliminate mwait_play_dead_cpuid_hint()")
because it introduced a significant power regression on systems that
start with "nosmt" in the kernel command line.
Namely, on such systems, SMT siblings permanently go offline early,
when cpuidle has not been initialized yet, so after the above commit,
hlt_play_dead() is called for them. Later on, when the processor
attempts to enter a deep package C-state, including PC10 which is
requisite for reaching minimum power in suspend-to-idle, it is not
able to do that because of the SMT siblings staying in C1 (which
they have been put into by HLT).
As a result, the idle power (including power in suspend-to-idle)
rises quite dramatically on those systems with all of the possible
consequences, which (needless to say) may not be expected by their
users.
This issue is hard to debug and potentially dangerous, so it needs to
be addressed as soon as possible in a way that will work for 6.15.y,
hence the revert.
Of course, after this revert, the issue that commit 96040f7273e2
attempted to address will be back and it will need to be fixed again
later.
Fixes: 96040f7273e2 ("x86/smp: Eliminate mwait_play_dead_cpuid_hint()")
Reported-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Tested-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Cc: 6.15+ <stable@vger.kernel.org> # 6.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/12674167.O9o76ZdvQC@rjwysocki.net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Convert all remaining interrupt-controller bindings to DT schema
- Convert Rockchip CDN-DP and Freescale TCON, M4IF, TigerP, LDB, PPC
PMC, imx-drm, and ftm-quaddec to DT schema
- Add bindings for fsl,vf610-pit, fsl,ls1021a-wdt, sgx,vz89te,
maxim,max30208, ti,lp8864, and fairphone,fp5-sndcard
- Add top-level constraints for renesas,vsp1 and renesas,fcp
- Add missing constraint in amlogic,pinctrl-a4 'group' nodes
- Adjust the allowed properties for dwc3-xilinx, sony,imx219,
pci-iommu, and renesas,dsi
- Add EcoNet vendor prefix
- Fix the reserved-memory.yaml in fsl,qman-fqd
- Drop obsolete numa.txt and cpu-topology.txt which are schemas in
dtschema now
- Drop Renesas RZ/N1S bindings
- Ensure Arm cpu nodes don't allow undocumented properties. Add all
the properties which are in use and undocumented. Drop the Mediatek
cpufreq binding which is not a binding, but just what DT properties
the driver uses.
- Add compatibles for Renesas RZ/G3E and RZ/V2N Mali Bifrost GPU
- Update documentation on defining child nodes with separate schemas
- Add bindings to PSCI MAINTAINERS entry
DT core:
- Add new functions to simplify driver handling of 'memory-region'
properties. Users to be added next cycle.
- Simplify of_dma_set_restricted_buffer() to use
of_for_each_phandle()
- Add missing unlock on error in unittest_data_add()"
* tag 'devicetree-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (87 commits)
dt-bindings: timer: Add fsl,vf610-pit.yaml
dt-bindings: gpu: mali-bifrost: Add compatible for RZ/G3E SoC
ASoC: dt-bindings: qcom,sm8250: Add Fairphone 5 sound card
dt-bindings: arm/cpus: Allow 2 power-domains entries
dt-bindings: usb: dwc3-xilinx: allow dma-coherent
media: dt-bindings: sony,imx219: Allow props from video-interface-devices
dt-bindings: soundwire: qcom: Document v2.1.0 version of IP block
dt-bindings: watchdog: fsl-imx-wdt: add compatible string fsl,ls1021a-wdt
dt-bindings: pinctrl: amlogic,pinctrl-a4: Add missing constraint on allowed 'group' node properties
dt-bindings: display: rockchip: Convert cdn-dp-rockchip.txt to yaml
dt-bindings: display: bridge: renesas,dsi: allow properties from dsi-controller
dt-bindings: trivial-devices: Add VZ89TE to trivial
media: dt-bindings: renesas,vsp1: add top-level constraints
media: dt-bindings: renesas,fcp: add top-level constraints
dt-bindings: trivial-devices: Add Maxim max30208
dt-bindings: soc: fsl,qman-fqd: Fix reserved-memory.yaml reference
dt-bindings: interrupt-controller: Convert ti,omap-intc-irq to DT schema
dt-bindings: interrupt-controller: Convert ti,omap4-wugen-mpu to DT schema
dt-bindings: interrupt-controller: Convert ti,keystone-irq to DT schema
dt-bindings: interrupt-controller: Convert technologic,ts4800-irqc to DT schema
...
|
|
Pull virtio updates from Michael Tsirkin:
- A new virtio RTC driver
- vhost scsi now logs write descriptors so migration works
- Some hardening work in virtio core
- An old spec compliance issue fixed in vhost net
- A couple of cleanups, fixes in vringh, virtio-pci, vdpa
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio: reject shm region if length is zero
virtio_rtc: Add RTC class driver
virtio_rtc: Add Arm Generic Timer cross-timestamping
virtio_rtc: Add PTP clocks
virtio_rtc: Add module and driver core
vringh: use bvec_kmap_local
vhost: vringh: Use matching allocation type in resize_iovec()
virtio-pci: Fix result size returned for the admin command completion
vdpa/octeon_ep: Control PCI dev enabling manually
vhost-scsi: log event queue write descriptors
vhost-scsi: log control queue write descriptors
vhost-scsi: log I/O queue write descriptors
vhost-scsi: adjust vhost_scsi_get_desc() to log vring descriptors
vhost: modify vhost_log_write() for broader users
|
|
Pull kvm updates from Paolo Bonzini:
"As far as x86 goes this pull request "only" includes TDX host support.
Quotes are appropriate because (at 6k lines and 100+ commits) it is
much bigger than the rest, which will come later this week and
consists mostly of bugfixes and selftests. s390 changes will also come
in the second batch.
ARM:
- Add large stage-2 mapping (THP) support for non-protected guests
when pKVM is enabled, clawing back some performance.
- Enable nested virtualisation support on systems that support it,
though it is disabled by default.
- Add UBSAN support to the standalone EL2 object used in nVHE/hVHE
and protected modes.
- Large rework of the way KVM tracks architecture features and links
them with the effects of control bits. While this has no functional
impact, it ensures correctness of emulation (the data is
automatically extracted from the published JSON files), and helps
dealing with the evolution of the architecture.
- Significant changes to the way pKVM tracks ownership of pages,
avoiding page table walks by storing the state in the hypervisor's
vmemmap. This in turn enables the THP support described above.
- New selftest checking the pKVM ownership transition rules
- Fixes for FEAT_MTE_ASYNC being accidentally advertised to guests
even if the host didn't have it.
- Fixes for the address translation emulation, which happened to be
rather buggy in some specific contexts.
- Fixes for the PMU emulation in NV contexts, decoupling PMCR_EL0.N
from the number of counters exposed to a guest and addressing a
number of issues in the process.
- Add a new selftest for the SVE host state being corrupted by a
guest.
- Keep HCR_EL2.xMO set at all times for systems running with the
kernel at EL2, ensuring that the window for interrupts is slightly
bigger, and avoiding a pretty bad erratum on the AmpereOne HW.
- Add workaround for AmpereOne's erratum AC04_CPU_23, which suffers
from a pretty bad case of TLB corruption unless accesses to HCR_EL2
are heavily synchronised.
- Add a per-VM, per-ITS debugfs entry to dump the state of the ITS
tables in a human-friendly fashion.
- and the usual random cleanups.
LoongArch:
- Don't flush tlb if the host supports hardware page table walks.
- Add KVM selftests support.
RISC-V:
- Add vector registers to get-reg-list selftest
- VCPU reset related improvements
- Remove scounteren initialization from VCPU reset
- Support VCPU reset from userspace using set_mpstate() ioctl
x86:
- Initial support for TDX in KVM.
This finally makes it possible to use the TDX module to run
confidential guests on Intel processors. This is quite a large
series, including support for private page tables (managed by the
TDX module and mirrored in KVM for efficiency), forwarding some
TDVMCALLs to userspace, and handling several special VM exits from
the TDX module.
This has been in the works for literally years and it's not really
possible to describe everything here, so I'll defer to the various
merge commits up to and including commit 7bcf7246c42a ('Merge
branch 'kvm-tdx-finish-initial' into HEAD')"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (248 commits)
x86/tdx: mark tdh_vp_enter() as __flatten
Documentation: virt/kvm: remove unreferenced footnote
RISC-V: KVM: lock the correct mp_state during reset
KVM: arm64: Fix documentation for vgic_its_iter_next()
KVM: arm64: np-guest CMOs with PMD_SIZE fixmap
KVM: arm64: Stage-2 huge mappings for np-guests
KVM: arm64: Add a range to pkvm_mappings
KVM: arm64: Convert pkvm_mappings to interval tree
KVM: arm64: Add a range to __pkvm_host_test_clear_young_guest()
KVM: arm64: Add a range to __pkvm_host_wrprotect_guest()
KVM: arm64: Add a range to __pkvm_host_unshare_guest()
KVM: arm64: Add a range to __pkvm_host_share_guest()
KVM: arm64: Introduce for_each_hyp_page
KVM: arm64: Handle huge mappings for np-guest CMOs
KVM: arm64: nv: Release faulted-in VNCR page from mmu_lock critical section
KVM: arm64: nv: Handle TLBI S1E2 for VNCR invalidation with mmu_lock held
KVM: arm64: nv: Hold mmu_lock when invalidating VNCR SW-TLB before translating
RISC-V: KVM: add KVM_CAP_RISCV_MP_STATE_RESET
RISC-V: KVM: Remove scounteren initialization
KVM: RISC-V: remove unnecessary SBI reset state
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wufan/ipe
Pull IPE update from Fan Wu:
"A single commit from Jasjiv Singh, that adds an errno field to IPE
policy load auditing to log failures with error details, not just
successes.
This improves the security audit trail and helps diagnose policy
deployment issues"
* tag 'ipe-pr-20250527' of git://git.kernel.org/pub/scm/linux/kernel/git/wufan/ipe:
ipe: add errno field to IPE policy load auditing
|
|
Currently, the child device for the clock controller inside the APCS block
is created without any OF node assigned, so the drivers need to rely on the
parent device for obtaining any resources.
Add support for defining the clock controller inside a "clock-controller"
subnode to break up circular dependencies between the mailbox and required
parent clocks of the clock controller. For backwards compatibility, if the
subnode is not defined, reuse the OF node from the parent device.
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
APCS "global" is sort of a "miscellaneous" hardware block that combines
multiple registers inside the application processor subsystem. Two distinct
use cases are currently stuffed together in a single device tree node:
- Mailbox: to communicate with other remoteprocs in the system.
- Clock: for controlling the CPU frequency.
These two use cases have unavoidable circular dependencies: the mailbox is
needed as early as possible during boot to start controlling shared
resources like clocks and power domains, while the clock controller needs
one of these shared clocks as its parent. Currently, there is no way to
distinguish these two use cases for generic mechanisms like fw_devlink.
This is currently blocking conversion of the deprecated custom "qcom,ipc"
properties to the standard "mboxes", see e.g. commit d92e9ea2f0f9
("arm64: dts: qcom: msm8939: revert use of APCS mbox for RPM"):
1. remoteproc &rpm needs mboxes = <&apcs1_mbox 8>;
2. The clock controller inside &apcs1_mbox needs
clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>.
3. &rpmcc is a child of remoteproc &rpm
The mailbox itself does not need any clocks and should probe early to
unblock the rest of the boot process. The "clocks" are only needed for the
separate clock controller. In Linux, these are already two separate drivers
that can probe independently.
Break up the circular dependency chain in the device tree by separating the
clock controller into a separate child node. Deprecate the old approach of
specifying the clock properties as part of the root node, but keep them for
backwards compatibility.
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
|
|
commit 083466754596 ("cpufreq: ACPI: Fix max-frequency computation")
modified get_max_boost_ratio() to return the nominal_freq advertised
in the _CPC object. This was for the purposes of computing the maximum
frequency. The frequencies advertised in _CPC objects are in
MHz. However, cpufreq expects the frequency to be in KHz. Since the
nominal_freq returned by get_max_boost_ratio() was not in KHz but
instead in MHz,the cpuinfo_max_frequency that was computed using this
nominal_freq was incorrect and an invalid value which resulted in
cpufreq reporting the P0 frequency as the cpuinfo_max_freq.
Fix this by converting the nominal_freq to KHz before returning the
same from get_max_boost_ratio().
Reported-by: Manu Bretelle <chantr4@gmail.com>
Closes: https://lore.kernel.org/lkml/aDaB63tDvbdcV0cg@HQ-GR2X1W2P57/
Fixes: 083466754596 ("cpufreq: ACPI: Fix max-frequency computation")
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Cc: 6.14+ <stable@vger.kernel.org> # 6.14+
Link: https://patch.msgid.link/20250529085143.709-1-gautham.shenoy@amd.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The function rb_allocate_pages() allocates cpu_buffer and on error needs
to free it. It has a single return. Use __free(kfree) and return directly
on errors and have the return use return_ptr(cpu_buffer).
The function alloc_buffer() allocates buffer and on error needs to free
it. It has a single return. Use __free(kfree) and return directly on
errors and have the return use return_ptr(buffer).
The function __rb_map_vma() allocates a temporary array "pages". Have it
use __free() and not worry about freeing it when returning.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250527143144.6edc4625@gandalf.local.home
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Convert the taking of the buffer->mutex and the cpu_buffer->mapping_lock
over to guard(mutex) and simplify the ring_buffer_map() and
ring_buffer_unmap() functions.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/20250527122009.267efb72@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The function ring_buffer_read_page() had two gotos. One was simply
returning "ret" and the other was unlocking the reader_lock.
There's no reason to use goto to simply return the "ret" variable. Instead
just return the value.
The jump to the unlocking of the reader_lock can be replaced by
guard(raw_spinlock_irqsave)(&cpu_buffer->reader_lock).
With these two changes the "ret" variable is no longer used and can be
removed. The return value on non-error is what was read and is stored in
the "read" variable.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250527145216.0187cf36@gandalf.local.home
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
