summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-05-22tools/testing/selftests/exec: fix link errorYang Yingliang
Fix the link error by adding '-static': gcc -Wall -Wl,-z,max-page-size=0x1000 -pie load_address.c -o /home/yang/linux/tools/testing/selftests/exec/load_address_4096 /usr/bin/ld: /tmp/ccopEGun.o: relocation R_AARCH64_ADR_PREL_PG_HI21 against symbol `stderr@@GLIBC_2.17' which may bind externally can not be used when making a shared object; recompile with -fPIC /usr/bin/ld: /tmp/ccopEGun.o(.text+0x158): unresolvable R_AARCH64_ADR_PREL_PG_HI21 relocation against symbol `stderr@@GLIBC_2.17' /usr/bin/ld: final link failed: bad value collect2: error: ld returned 1 exit status make: *** [Makefile:25: tools/testing/selftests/exec/load_address_4096] Error 1 Link: https://lkml.kernel.org/r/20210514092422.2367367-1-yangyingliang@huawei.com Fixes: 206e22f01941 ("tools/testing/selftests: add self-test for verifying load alignment") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Cc: Chris Kennelly <ckennelly@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-22ipc/mqueue, msg, sem: avoid relying on a stack reference past its expiryVarad Gautam
do_mq_timedreceive calls wq_sleep with a stack local address. The sender (do_mq_timedsend) uses this address to later call pipelined_send. This leads to a very hard to trigger race where a do_mq_timedreceive call might return and leave do_mq_timedsend to rely on an invalid address, causing the following crash: RIP: 0010:wake_q_add_safe+0x13/0x60 Call Trace: __x64_sys_mq_timedsend+0x2a9/0x490 do_syscall_64+0x80/0x680 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f5928e40343 The race occurs as: 1. do_mq_timedreceive calls wq_sleep with the address of `struct ext_wait_queue` on function stack (aliased as `ewq_addr` here) - it holds a valid `struct ext_wait_queue *` as long as the stack has not been overwritten. 2. `ewq_addr` gets added to info->e_wait_q[RECV].list in wq_add, and do_mq_timedsend receives it via wq_get_first_waiter(info, RECV) to call __pipelined_op. 3. Sender calls __pipelined_op::smp_store_release(&this->state, STATE_READY). Here is where the race window begins. (`this` is `ewq_addr`.) 4. If the receiver wakes up now in do_mq_timedreceive::wq_sleep, it will see `state == STATE_READY` and break. 5. do_mq_timedreceive returns, and `ewq_addr` is no longer guaranteed to be a `struct ext_wait_queue *` since it was on do_mq_timedreceive's stack. (Although the address may not get overwritten until another function happens to touch it, which means it can persist around for an indefinite time.) 6. do_mq_timedsend::__pipelined_op() still believes `ewq_addr` is a `struct ext_wait_queue *`, and uses it to find a task_struct to pass to the wake_q_add_safe call. In the lucky case where nothing has overwritten `ewq_addr` yet, `ewq_addr->task` is the right task_struct. In the unlucky case, __pipelined_op::wake_q_add_safe gets handed a bogus address as the receiver's task_struct causing the crash. do_mq_timedsend::__pipelined_op() should not dereference `this` after setting STATE_READY, as the receiver counterpart is now free to return. Change __pipelined_op to call wake_q_add_safe on the receiver's task_struct returned by get_task_struct, instead of dereferencing `this` which sits on the receiver's stack. As Manfred pointed out, the race potentially also exists in ipc/msg.c::expunge_all and ipc/sem.c::wake_up_sem_queue_prepare. Fix those in the same way. Link: https://lkml.kernel.org/r/20210510102950.12551-1-varad.gautam@suse.com Fixes: c5b2cbdbdac563 ("ipc/mqueue.c: update/document memory barriers") Fixes: 8116b54e7e23ef ("ipc/sem.c: document and update memory barriers") Fixes: 0d97a82ba830d8 ("ipc/msg.c: update and document memory barriers") Signed-off-by: Varad Gautam <varad.gautam@suse.com> Reported-by: Matthias von Faber <matthias.vonfaber@aox-tech.de> Acked-by: Davidlohr Bueso <dbueso@suse.de> Acked-by: Manfred Spraul <manfred@colorfullife.com> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-22Revert "mm/gup: check page posion status for coredump."Michal Hocko
While reviewing [1] I came across commit d3378e86d182 ("mm/gup: check page posion status for coredump.") and noticed that this patch is broken in two ways. First it doesn't really prevent hwpoison pages from being dumped because hwpoison pages can be marked asynchornously at any time after the check. Secondly, and more importantly, the patch introduces a ref count leak because get_dump_page takes a reference on the page which is not released. It also seems that the patch was merged incorrectly because there were follow up changes not included as well as discussions on how to address the underlying problem [2] Therefore revert the original patch. Link: http://lkml.kernel.org/r/20210429122519.15183-4-david@redhat.com [1] Link: http://lkml.kernel.org/r/57ac524c-b49a-99ec-c1e4-ef5027bfb61b@redhat.com [2] Link: https://lkml.kernel.org/r/20210505135407.31590-1-mhocko@kernel.org Fixes: d3378e86d182 ("mm/gup: check page posion status for coredump.") Signed-off-by: Michal Hocko <mhocko@suse.com> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Aili Yao <yaoaili@kingsoft.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-22mm/shuffle: fix section mismatch warningArnd Bergmann
clang sometimes decides not to inline shuffle_zone(), but it calls a __meminit function. Without the extra __meminit annotation we get this warning: WARNING: modpost: vmlinux.o(.text+0x2a86d4): Section mismatch in reference from the function shuffle_zone() to the function .meminit.text:__shuffle_zone() The function shuffle_zone() references the function __meminit __shuffle_zone(). This is often because shuffle_zone lacks a __meminit annotation or the annotation of __shuffle_zone is wrong. shuffle_free_memory() did not show the same problem in my tests, but it could happen in theory as well, so mark both as __meminit. Link: https://lkml.kernel.org/r/20210514135952.2928094-1-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Wei Yang <richard.weiyang@linux.alibaba.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-22Merge tag 'block-5.13-2021-05-22' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - Fix BLKRRPART and deletion race (Gulam, Christoph) - NVMe pull request (Christoph): - nvme-tcp corruption and timeout fixes (Sagi Grimberg, Keith Busch) - nvme-fc teardown fix (James Smart) - nvmet/nvme-loop memory leak fixes (Wu Bo)" * tag 'block-5.13-2021-05-22' of git://git.kernel.dk/linux-block: block: fix a race between del_gendisk and BLKRRPART block: prevent block device lookups at the beginning of del_gendisk nvme-fc: clear q_live at beginning of association teardown nvme-tcp: rerun io_work if req_list is not empty nvme-tcp: fix possible use-after-completion nvme-loop: fix memory leak in nvme_loop_create_ctrl() nvmet: fix memory leak in nvmet_alloc_ctrl()
2021-05-22Merge tag 'io_uring-5.13-2021-05-22' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring fixes from Jens Axboe: "One fix for a regression with poll in this merge window, and another just hardens the io-wq exit path a bit" * tag 'io_uring-5.13-2021-05-22' of git://git.kernel.dk/linux-block: io_uring: fortify tctx/io_wq cleanup io_uring: don't modify req->poll for rw
2021-05-22Merge tag 'for-linus-5.13b-rc3-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - a fix for a boot regression when running as PV guest on hardware without NX support - a small series fixing a bug in the Xen pciback driver when configuring a PCI card with multiple virtual functions * tag 'for-linus-5.13b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen-pciback: reconfigure also from backend watch handler xen-pciback: redo VF placement in the virtual topology x86/Xen: swap NX determination and GDT setup on BSP
2021-05-21Merge tag 'xfs-5.13-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds
Pull xfs fixes from Darrick Wong: - Fix some math errors in the realtime allocator when extent size hints are applied. - Fix unnecessary short writes to realtime files when free space is fragmented. - Fix a crash when using scrub tracepoints. - Restore ioctl uapi definitions that were accidentally removed in 5.13-rc1. * tag 'xfs-5.13-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: restore old ioctl definitions xfs: fix deadlock retry tracepoint arguments xfs: retry allocations when locality-based search fails xfs: adjust rt allocation minlen when extszhint > rtextsize
2021-05-21Merge tag 'for-5.13-rc2-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "A few more fixes: - fix unaligned compressed writes in zoned mode - fix false positive lockdep warning when cloning inline extent - remove wrong BUG_ON in tree-log error handling" * tag 'for-5.13-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: zoned: fix parallel compressed writes btrfs: zoned: pass start block to btrfs_use_zone_append btrfs: do not BUG_ON in link_to_fixup_dir btrfs: release path before starting transaction when cloning inline extent
2021-05-21Merge tag '5.13-rc3-smb3' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs fixes from Steve French: "Seven smb3 fixes: one for stable, three others fix problems found in testing handle leases, and a compounded request fix" * tag '5.13-rc3-smb3' of git://git.samba.org/sfrench/cifs-2.6: Fix KASAN identified use-after-free issue. Defer close only when lease is enabled. Fix kernel oops when CONFIG_DEBUG_ATOMIC_SLEEP is enabled. cifs: Fix inconsistent indenting cifs: fix memory leak in smb2_copychunk_range SMB3: incorrect file id in requests compounded with open cifs: remove deadstore in cifs_close_all_deferred_files()
2021-05-21Merge tag 'gpio-fixes-for-v5.13-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - add missing MODULE_DEVICE_TABLE in gpio-cadence - fix a kernel doc validator error in gpio-xilinx - don't set parent IRQ affinity in gpio-tegra186 * tag 'gpio-fixes-for-v5.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: tegra186: Don't set parent IRQ affinity gpio: xilinx: Correct kernel doc for xgpio_probe() gpio: cadence: Add missing MODULE_DEVICE_TABLE
2021-05-21ipv6: record frag_max_size in atomic fragments in input pathFrancesco Ruggeri
Commit dbd1759e6a9c ("ipv6: on reassembly, record frag_max_size") filled the frag_max_size field in IP6CB in the input path. The field should also be filled in case of atomic fragments. Fixes: dbd1759e6a9c ('ipv6: on reassembly, record frag_max_size') Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21net:sfc: fix non-freed irq in legacy irq modeÍñigo Huguet
SFC driver can be configured via modparam to work using MSI-X, MSI or legacy IRQ interrupts. In the last one, the interrupt was not properly released on module remove. It was not freed because the flag irqs_hooked was not set during initialization in the case of using legacy IRQ. Example of (trimmed) trace during module remove without this fix: remove_proc_entry: removing non-empty directory 'irq/125', leaking at least '0000:3b:00.1' WARNING: CPU: 39 PID: 3658 at fs/proc/generic.c:715 remove_proc_entry+0x15c/0x170 ...trimmed... Call Trace: unregister_irq_proc+0xe3/0x100 free_desc+0x29/0x70 irq_free_descs+0x47/0x70 mp_unmap_irq+0x58/0x60 acpi_unregister_gsi_ioapic+0x2a/0x40 acpi_pci_irq_disable+0x78/0xb0 pci_disable_device+0xd1/0x100 efx_pci_remove+0xa1/0x1e0 [sfc] pci_device_remove+0x38/0xa0 __device_release_driver+0x177/0x230 driver_detach+0xcb/0x110 bus_remove_driver+0x58/0xd0 pci_unregister_driver+0x2a/0xb0 efx_exit_module+0x24/0xf40 [sfc] __do_sys_delete_module.constprop.0+0x171/0x280 ? exit_to_user_mode_prepare+0x83/0x1d0 do_syscall_64+0x3d/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f9f9385800b ...trimmed... Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21dpaa2-eth: don't print error from dpaa2_mac_connect if that's EPROBE_DEFERVladimir Oltean
When booting a board with DPAA2 interfaces defined statically via DPL (as opposed to creating them dynamically using restool), the driver will print an unspecific error message. This change adds the error code to the message, and avoids printing altogether if the error code is EPROBE_DEFER, because that is not a cause of alarm. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21RDS tcp loopback connection can hangRao Shoaib
When TCP is used as transport and a program on the system connects to RDS port 16385, connection is accepted but denied per the rules of RDS. However, RDS connections object is left in the list. Next loopback connection will select that connection object as it is at the head of list. The connection attempt will hang as the connection object is set to connect over TCP which is not allowed The issue can be reproduced easily, use rds-ping to ping a local IP address. After that use any program like ncat to connect to the same IP address and port 16385. This will hang so ctrl-c out. Now try rds-ping, it will hang. To fix the issue this patch adds checks to disallow the connection object creation and destroys the connection object. Signed-off-by: Rao Shoaib <rao.shoaib@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21MAINTAINERS: remove Ioana Radulescu from dpaa2-ethIoana Ciornei
Remove Ioana Radulescu from dpaa2-eth since she is no longer working on the DPAA2 set of drivers. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21net: lantiq: fix memory corruption in RX ringAleksander Jan Bajkowski
In a situation where memory allocation or dma mapping fails, an invalid address is programmed into the descriptor. This can lead to memory corruption. If the memory allocation fails, DMA should reuse the previous skb and mapping and drop the packet. This patch also increments rx drop counter. Fixes: fe1a56420cf2 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver ") Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21net: dsa: bcm_sf2: Fix bcm_sf2_reg_rgmii_cntrl() call for non-RGMII portFlorian Fainelli
We cannot call bcm_sf2_reg_rgmii_cntrl() for a port that is not RGMII, yet we do that in bcm_sf2_sw_mac_link_up() irrespective of the port's interface. Move that read until we have properly qualified the PHY interface mode. This avoids triggering a warning on 7278 platforms that have GMII ports. Fixes: 55cfeb396965 ("net: dsa: bcm_sf2: add function finding RGMII register") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21MAINTAINERS: s390/net: add netdev listJulian Wiedmann
Discussions for network-related code should include the netdev list. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21Merge branch 'dpaa2-eth-of_node'David S. Miller
Ioana Ciornei says: ==================== dpaa2-eth: setup the of_node This patch set allows DSA to work with a DPAA2 master device by setting up the of_node to point to the corresponding MAC DTS node, so that of_find_net_device_by_node() can find it. As an added benefit, udev rules can now be used to create a naming scheme based on the physical MAC. The second patch renames the debugfs directory to use the DPNI name instead of the netdev name, since the latter can be changed after probe time. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21dpaa2-eth: name the debugfs directory after the DPNI objectIoana Ciornei
Name the debugfs directory after the DPNI object instead of the netdev name since this can be changed after probe by udev rules. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21dpaa2-eth: setup the of_node field of the deviceIoana Ciornei
When the DPNI object is connected to a DPMAC, setup the of_node to point to the DTS device node of that specific MAC. This enables other drivers, for example the DSA subsystem, to find the net_device by its device node. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21Merge branch 'sja1105-stats'David S. Miller
Vladimir Oltean says: ==================== Ethtool statistics counters cleanup for SJA1105 DSA driver This series removes some reported data from ethtool -S which were not counters at all, and reorganizes the code such that counters can be read individually and not just all at once. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21net: dsa: sja1105: don't use burst SPI reads for port statisticsVladimir Oltean
The current internal sja1105 driver API is optimized for retrieving many statistics counters at once. But the switch does not do atomic snapshotting for them anyway. In case we start reporting the hardware port counters through ndo_get_stats64 as well, not just ethtool, it would be good to be able to read individual port counters and not all of them. Additionally, since Arnd Bergmann's commit ae1804de93f6 ("dsa: sja1105: dynamically allocate stats structure"), sja1105_get_ethtool_stats allocates memory dynamically, since struct sja1105_port_status was deemed to consume too much stack memory. That is not ideal. The large structure is only needed because of the burst read. If we read statistics one by one, we can consume less memory, and we can avoid dynamic allocation. Additionally, latency-sensitive interfaces such as PTP operations (for phc2sys) might suffer if the SPI mutex is being held for too long, which happens in the case of SPI burst reads. By reading counters one by one, we give a chance for higher priority processes to preempt and take the SPI bus mutex for accessing the PTP clock. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21net: dsa: sja1105: stop reporting the queue levels in ethtool port countersVladimir Oltean
The queue levels are not counters, but instead they represent the occupancy of the MAC TX queues. Having these in ethtool port counters is not helpful, so remove them. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21net: hns3: Fix return of uninitialized variable retColin Ian King
In the unlikely event that rule_cnt is zero the variable ret is not assigned a value and function hclge_dbg_dump_fd_tcam can end up returning an unitialized value in ret. Fix this by explicitly setting ret to zero before the for-loop. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: b5a0b70d77b9 ("net: hns3: refactor dump fd tcam of debugfs") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21atm: Fix typozuoqilin
Change 'contol' to 'control'. Signed-off-by: zuoqilin <zuoqilin@yulong.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21net: phy: Fix inconsistent indentingJiapeng Chong
Eliminate the follow smatch warning: drivers/net/phy/phy_device.c:2886 phy_probe() warn: inconsistent indenting. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21sfc: farch: fix compile warning in efx_farch_dimension_resources()Yang Yingliang
Fix the following kernel build warning when CONFIG_SFC_SRIOV is disabled: drivers/net/ethernet/sfc/farch.c: In function ‘efx_farch_dimension_resources’: drivers/net/ethernet/sfc/farch.c:1671:21: warning: variable ‘buftbl_min’ set but not used [-Wunused-but-set-variable] unsigned vi_count, buftbl_min, total_tx_channels; Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21net: bonding: bond_alb: Fix some typos in bond_alb.cWang Hai
s/becase/because/ s/reqeusts/requests/ s/funcions/functions/ s/addreses/addresses/ Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21caif_virtio: Fix some typos in caif_virtio.cWang Hai
s/patckets/packets/ s/avilable/available/ s/tbe/the/ Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21Merge branch 'wan-cleanups'David S. Miller
Guangbin Huang says: ==================== net: wan: clean up some code style issues This patchset clean up some code style issues. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21net: wan: add necessary () to macro argumentPeng Li
Macro argument 'card' and 'port' may be better as '(card)' and '(port)' to avoid precedence issues. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21net: wan: add braces {} to all arms of the statementPeng Li
Braces {} should be used on all arms of this statement. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21net: wan: remove redundant blank linesPeng Li
This patch removes some redundant blank lines. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21net: wan: fix the code style issue about trailing statementsPeng Li
Trailing statements should be on next line. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21net: wan: add some required spacesPeng Li
Add space required after that close brace '}'. Add space required before the open parenthesis '('. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21net: wan: fix an code style issue about "foo* bar"Peng Li
Fix the checkpatch error as "foo* bar" should be "foo *bar". Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21Merge branch 'sja1105-spi'David S. Miller
Vladimir Oltean says: ==================== Adapt the sja1105 DSA driver to the SPI controller's transfer limits This series changes the SPI transfer procedure in sja1105 to take into consideration the buffer size limitations that the SPI controller driver might have. Changes in v2: Remove the driver's use of cs_change and send multiple, smaller SPI messages instead of a single large one. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21net: dsa: sja1105: adapt to a SPI controller with a limited max transfer sizeVladimir Oltean
The static config of the sja1105 switch is a long stream of bytes which is programmed to the hardware in chunks (portions with the chip select continuously asserted) of max 256 bytes each. Each chunk is a spi_message composed of 2 spi_transfers: the buffer with the data and a preceding buffer with the SPI access header. Only that certain SPI controllers, such as the spi-sc18is602 I2C-to-SPI bridge, cannot keep the chip select asserted for that long. The spi_max_transfer_size() and spi_max_message_size() functions are how the controller can impose its hardware limitations upon the SPI peripheral driver. For the sja1105 driver to work with these controllers, both buffers must be smaller than the transfer limit, and their sum must be smaller than the message limit. Regression-tested on a switch connected to a controller with no limitations (spi-fsl-dspi) as well as with one with caps for both max_transfer_size and max_message_size (spi-sc18is602). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21net: dsa: sja1105: send multiple spi_messages instead of using cs_changeVladimir Oltean
The sja1105 driver has been described by Mark Brown as "not using the [ SPI ] API at all idiomatically" due to the use of cs_change: https://patchwork.kernel.org/project/netdevbpf/patch/20210520135031.2969183-1-olteanv@gmail.com/ According to include/linux/spi/spi.h, the chip select is supposed to be asserted for the entire length of a SPI message, as long as cs_change is false for all member transfers. The cs_change flag changes the following: (i) When a non-final SPI transfer has cs_change = true, the chip select should temporarily deassert and then reassert starting with the next transfer. (ii) When a final SPI transfer has cs_change = true, the chip select should remain asserted until the following SPI message. The sja1105 driver only uses cs_change for its first property, to form a single SPI message whose layout can be seen below: this is an entire, single spi_message _______________________________________________________________________________________________ / \ +-------------+---------------+-------------+---------------+ ... +-------------+---------------+ | hdr_xfer[0] | chunk_xfer[0] | hdr_xfer[1] | chunk_xfer[1] | | hdr_xfer[n] | chunk_xfer[n] | +-------------+---------------+-------------+---------------+ ... +-------------+---------------+ cs_change false true false true false false ____________________________ _____________________________ _____________________________ CS line __/ \/ \ ... / \__ The fact of the matter is that spi_max_message_size() has an ambiguous meaning if any non-final transfer has cs_change = true. If the SPI master has a limitation in that it cannot keep the chip select asserted for more than, say, 200 bytes (like the spi-sc18is602), the normal thing for it to do is to implement .max_transfer_size and .max_message_size, and limit both to 200: in the "worst case" where cs_change is always false, then the controller can, indeed, not send messages larger than 200 bytes. But the fact that the SPI controller's max_message_size does not necessarily mean that we cannot send messages larger than that. Notably, if the SPI master special-cases the transfers with cs_change and treats every chip select toggling as an entirely new transaction, then a SPI message can easily exceed that limit. So there is a temptation to ignore the controller's reported max_message_size when using cs_change = true in non-final transfers. But that can lead to false conclusions. As Mark points out, the SPI controller might have a different kind of limitation with the max message size, that has nothing at all to do with how long it can keep the chip select asserted. For example, that might be the case if the device is able to offload the chip select changes to the hardware as part of the data stream, and it packs the entire stream of commands+data (corresponding to a SPI message) into a single DMA transfer that is itself limited in size. So the only thing we can do is avoid ambiguity by not using cs_change at all. Instead of sending a single spi_message, we now send multiple SPI messages as follows: spi_message 0 spi_message 1 spi_message n ____________________________ ___________________________ _____________________________ / \ / \ / \ +-------------+---------------+-------------+---------------+ ... +-------------+---------------+ | hdr_xfer[0] | chunk_xfer[0] | hdr_xfer[1] | chunk_xfer[1] | | hdr_xfer[n] | chunk_xfer[n] | +-------------+---------------+-------------+---------------+ ... +-------------+---------------+ cs_change false true false true false false ____________________________ _____________________________ _____________________________ CS line __/ \/ \ ... / \__ which is clearer because the max_message_size limit is now easier to enforce. What is transmitted on the wire stays, of course, the same. Additionally, because we send no more than 2 transfers at a time, we now avoid dynamic memory allocation too, which might be seen as an improvement by some. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21net: phy: add driver for Motorcomm yt8511 phyPeter Geis
Add a driver for the Motorcomm yt8511 phy that will be used in the production Pine64 rk3566-quartz64 development board. It supports gigabit transfer speeds, rgmii, and 125mhz clk output. Signed-off-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21net: ethernet: mtk_eth_soc: Fix DIM support for MT7628/88Stefan Roese
When updating to latest mainline for some testing on the GARDENA smart gateway based on the MT7628, I noticed that ethernet does not work any more. Commit e9229ffd550b ("net: ethernet: mtk_eth_soc: implement dynamic interrupt moderation") introduced this problem, as it missed the RX_DIM & TX_DIM configuration for this SoC variant. This patch fixes this by calling mtk_dim_rx() & mtk_dim_tx() in this case as well. Signed-off-by: Stefan Roese <sr@denx.de> Fixes: e9229ffd550b ("net: ethernet: mtk_eth_soc: implement dynamic interrupt moderation") Cc: Felix Fietkau <nbd@nbd.name> Cc: John Crispin <john@phrozen.org> Cc: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Cc: Reto Schneider <code@reto-schneider.ch> Cc: Reto Schneider <reto.schneider@husqvarnagroup.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21net: xilinx_emaclite: Do not print real IOMEM pointerYueHaibing
Printing kernel pointers is discouraged because they might leak kernel memory layout. This fixes smatch warning: drivers/net/ethernet/xilinx/xilinx_emaclite.c:1191 xemaclite_of_probe() warn: argument 4 to %08lX specifier is cast from pointer Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21perf stat: Skip evlist__[enable|disable] when all events uses BPFSong Liu
When all events of a perf-stat session use BPF, it is not necessary to call evlist__enable() and evlist__disable(). Skip them when all_counters_use_bpf is true. Signed-off-by: Song Liu <song@kernel.org> Reported-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-05-21perf script: Add missing PERF_IP_FLAG_CHARS for VM-Entry and VM-ExitAdrian Hunter
Add 'g' (guest) for VM-Entry and 'h' (host) for VM-Exit. Fixes: c025d46cd932c ("perf script: Add branch types for VM-Entry and VM-Exit") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lore.kernel.org/lkml/20210521175127.27264-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-05-21perf scripts python: exported-sql-viewer.py: Fix warning displayAdrian Hunter
Deprecation warnings are useful only for the developer, not an end user. Display warnings only when requested using the python -W option. This stops the display of warnings like: tools/perf/scripts/python/exported-sql-viewer.py:5102: DeprecationWarning: an integer is required (got type PySide2.QtCore.Qt.AlignmentFlag). Implicit conversion to integers using __int__ is deprecated, and may be removed in a future version of Python. err = app.exec_() Since the warning can be fixed only in PySide2, we must wait for it to be finally fixed there. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org # v5.3+ Link: http://lore.kernel.org/lkml/20210521092053.25683-4-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-05-21perf scripts python: exported-sql-viewer.py: Fix Array TypeErrorAdrian Hunter
The 'Array' class is present in more than one python standard library. In some versions of Python 3, the following error occurs: Traceback (most recent call last): File "tools/perf/scripts/python/exported-sql-viewer.py", line 4702, in <lambda> reports_menu.addAction(CreateAction(label, "Create a new window displaying branch events", lambda a=None,x=dbid: self.NewBranchView(x), self)) File "tools/perf/scripts/python/exported-sql-viewer.py", line 4727, in NewBranchView BranchWindow(self.glb, event_id, ReportVars(), self) File "tools/perf/scripts/python/exported-sql-viewer.py", line 3208, in __init__ self.model = LookupCreateModel(model_name, lambda: BranchModel(glb, event_id, report_vars.where_clause)) File "tools/perf/scripts/python/exported-sql-viewer.py", line 343, in LookupCreateModel model = create_fn() File "tools/perf/scripts/python/exported-sql-viewer.py", line 3208, in <lambda> self.model = LookupCreateModel(model_name, lambda: BranchModel(glb, event_id, report_vars.where_clause)) File "tools/perf/scripts/python/exported-sql-viewer.py", line 3124, in __init__ self.fetcher = SQLFetcher(glb, sql, prep, self.AddSample) File "tools/perf/scripts/python/exported-sql-viewer.py", line 2658, in __init__ self.buffer = Array(c_char, self.buffer_size, lock=False) TypeError: abstract class This apparently happens because Python can be inconsistent about which class of the name 'Array' gets imported. Fix by importing explicitly by name so that only the desired 'Array' gets imported. Fixes: 8392b74b575c3 ("perf scripts python: exported-sql-viewer.py: Add ability to display all the database tables") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20210521092053.25683-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-05-21perf scripts python: exported-sql-viewer.py: Fix copy to clipboard from Top ↵Adrian Hunter
Calls by elapsed Time report Provide missing argument to prevent following error when copying a selection to the clipboard: Traceback (most recent call last): File "tools/perf/scripts/python/exported-sql-viewer.py", line 4041, in <lambda> menu.addAction(CreateAction("&Copy selection", "Copy to clipboard", lambda: CopyCellsToClipboardHdr(self.view), self.view)) File "tools/perf/scripts/python/exported-sql-viewer.py", line 4021, in CopyCellsToClipboardHdr CopyCellsToClipboard(view, False, True) File "tools/perf/scripts/python/exported-sql-viewer.py", line 4018, in CopyCellsToClipboard view.CopyCellsToClipboard(view, as_csv, with_hdr) File "tools/perf/scripts/python/exported-sql-viewer.py", line 3871, in CopyTableCellsToClipboard val = model.headerData(col, Qt.Horizontal) TypeError: headerData() missing 1 required positional argument: 'role' Fixes: 96c43b9a7ab3b ("perf scripts python: exported-sql-viewer.py: Add copy to clipboard") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20210521092053.25683-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-05-21tools headers UAPI: Sync files changed by the quotactl_path unwiringArnaldo Carvalho de Melo
To pick the changes in this csets: 5b9fedb31e476693 ("quota: Disable quotactl_path syscall") That silences these perf build warnings: Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h' diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl' diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl Warning: Kernel ABI header at 'tools/perf/arch/powerpc/entry/syscalls/syscall.tbl' differs from latest version at 'arch/powerpc/kernel/syscalls/syscall.tbl' diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl Warning: Kernel ABI header at 'tools/perf/arch/s390/entry/syscalls/syscall.tbl' differs from latest version at 'arch/s390/kernel/syscalls/syscall.tbl' diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl Warning: Kernel ABI header at 'tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl' differs from latest version at 'arch/mips/kernel/syscalls/syscall_n64.tbl' diff -u tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl arch/mips/kernel/syscalls/syscall_n64.tbl Cc: Jan Kara <jack@suse.cz> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 02:05:39 +0000