summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-06-28bonding: fix 802.3ad aggregator reselectionJay Vosburgh
Since commit 7bb11dc9f59d ("bonding: unify all places where actor-oper key needs to be updated."), the logic in bonding to handle selection between multiple aggregators has not functioned. This affects only configurations wherein the bonding slaves connect to two discrete aggregators (e.g., two independent switches, each with LACP enabled), thus creating two separate aggregation groups within a single bond. The cause is a change in 7bb11dc9f59d to no longer set AD_PORT_BEGIN on a port after a link state change, which would cause the port to be reselected for attachment to an aggregator as if were newly added to the bond. We cannot restore the prior behavior, as it contradicts IEEE 802.1AX 5.4.12, which requires ports that "become inoperable" (lose carrier, setting port_enabled=false as per 802.1AX 5.4.7) to remain selected (i.e., assigned to the aggregator). As the port now remains selected, the aggregator selection logic is not invoked. A side effect of this change is that aggregators in bonding will now contain ports that are link down. The aggregator selection logic does not currently handle this situation correctly, causing incorrect aggregator selection. This patch makes two changes to repair the aggregator selection logic in bonding to function as documented and within the confines of the standard: First, the aggregator selection and related logic now utilizes the number of active ports per aggregator, not the number of selected ports (as some selected ports may be down). The ad_select "bandwidth" and "count" options only consider ports that are link up. Second, on any carrier state change of any slave, the aggregator selection logic is explicitly called to insure the correct aggregator is active. Reported-by: Veli-Matti Lintu <veli-matti.lintu@opinsys.fi> Fixes: 7bb11dc9f59d ("bonding: unify all places where actor-oper key needs to be updated.") Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-28ipmr/ip6mr: Initialize the last assert time of mfc entries.Tom Goff
This fixes wrong-interface signaling on 32-bit platforms for entries created when jiffies > 2^31 + MFC_ASSERT_THRESH. Signed-off-by: Tom Goff <thomas.goff@ll.mit.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-28s390: fix test_fp_ctl inline assembly contraintsMartin Schwidefsky
The test_fp_ctl function is used to test if a given value is a valid floating-point control. The inline assembly in test_fp_ctl uses an incorrect constraint for the 'orig_fpc' variable. If the compiler chooses the same register for 'fpc' and 'orig_fpc' the test_fp_ctl() function always returns true. This allows user space to trigger kernel oopses with invalid floating-point control values on the signal stack. This problem has been introduced with git commit 4725c86055f5bbdcdf "s390: fix save and restore of the floating-point-control register" Cc: stable@vger.kernel.org # v3.13+ Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-28Revert "s390/kdump: Clear subchannel ID to signal non-CCW/SCSI IPL"Michael Holzheu
This reverts commit 852ffd0f4e23248b47531058e531066a988434b5. There are use cases where an intermediate boot kernel (1) uses kexec to boot the final production kernel (2). For this scenario we should provide the original boot information to the production kernel (2). Therefore clearing the boot information during kexec() should not be done. Cc: stable@vger.kernel.org # v3.17+ Reported-by: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-28arc: unwind: warn only once if DW2_UNWIND is disabledAlexey Brodkin
If CONFIG_ARC_DW2_UNWIND is disabled every time arc_unwind_core() gets called following message gets printed in debug console: ----------------->8--------------- CONFIG_ARC_DW2_UNWIND needs to be enabled ----------------->8--------------- That message makes sense if user indeed wants to see a backtrace or get nice function call-graphs in perf but what if user disabled unwinder for the purpose? Why pollute his debug console? So instead we'll warn user about possibly missing feature once and let him decide if that was what he or she really wanted. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: stable@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-06-28ARC: unwind: ensure that .debug_frame is generated (vs. .eh_frame)Vineet Gupta
With recent binutils update to support dwarf CFI pseudo-ops in gas, we now get .eh_frame vs. .debug_frame. Although the call frame info is exactly the same in both, the CIE differs, which the current kernel unwinder can't cope with. This broke both the kernel unwinder as well as loadable modules (latter because of a new unhandled relo R_ARC_32_PCREL from .rela.eh_frame in the module loader) The ideal solution would be to switch unwinder to .eh_frame. For now however we can make do by just ensureing .debug_frame is generated by removing -fasynchronous-unwind-tables .eh_frame generated with -gdwarf-2 -fasynchronous-unwind-tables .debug_frame generated with -gdwarf-2 Fixes STAR 9001058196 Cc: stable@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2016-06-27Merge tag 'for-v4.7-rc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply fixes from Sebastian Reichel. * tag 'for-v4.7-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: power_supply: tps65217-charger: Fix NULL deref during property export power_supply: power_supply_read_temp only if use_cnt > 0
2016-06-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: vmmouse - remove port reservation Input: elantech - add more IC body types to the list Input: wacom_w8001 - ignore invalid pen data packets Input: wacom_w8001 - w8001_MAX_LENGTH should be 13 Input: xpad - fix oops when attaching an unknown Xbox One gamepad MAINTAINERS: add Pali Rohár as reviewer of ALPS PS/2 touchpad driver Input: add HDMI CEC specific keycodes Input: add BUS_CEC type Input: xpad - fix rumble on Xbox One controllers with 2015 firmware
2016-06-28cpufreq: Avoid false-positive WARN_ON()s in cpufreq_update_policy()Rafael J. Wysocki
CPU notifications from the firmware coming in when cpufreq is suspended cause cpufreq_update_current_freq() to return 0 which triggers the WARN_ON() in cpufreq_update_policy() for no reason. Avoid that by checking cpufreq_suspended before calling cpufreq_update_current_freq(). Fixes: c9d9c929e674 (cpufreq: Abort cpufreq_update_current_freq() for cpufreq_suspended set) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: 4.6+ <stable@vger.kernel.org> # 4.6+
2016-06-27cpufreq: dt: call of_node_put() before error outMasahiro Yamada
If of_match_node() fails, this init function bails out without calling of_node_put(). Also change of_node_put(of_root) to of_node_put(np); both of them hold the same pointer, but it seems better to call of_node_put() against the node returned by of_find_node_by_path(). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-27intel_pstate: Do not clear utilization update hooks on policy changesRafael J. Wysocki
intel_pstate_set_policy() is invoked by the cpufreq core during driver initialization, on changes of policy attributes (minimim and maximum frequency, for example) via sysfs and via CPU notifications from the platform firmware. On some platforms the latter may occur relatively often. Commit bb6ab52f2bef (intel_pstate: Do not set utilization update hook too early) made intel_pstate_set_policy() clear the CPU's utilization update hook before updating the policy attributes for it (and set the hook again after doind that), but that involves invoking synchronize_sched() and adds overhead to the CPU notifications mentioned above and to the sched-RCU handling in general. That extra overhead is arguably not necessary, because updating policy attributes when the CPU's utilization update hook is active should not lead to any adverse effects, so drop the clearing of the hook from intel_pstate_set_policy() and make it check if the hook has been set already when attempting to set it. Fixes: bb6ab52f2bef (intel_pstate: Do not set utilization update hook too early) Reported-by: Jisheng Zhang <jszhang@marvell.com> Tested-by: Jisheng Zhang <jszhang@marvell.com> Tested-by: Doug Smythies <dsmythies@telus.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-06-27Merge branch 'rc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild regression fix from Michal Marek: "The problem is that commit 9c8fa9bc08f6 ("kbuild: fix if_change and friends to consider argument order") fixed a potential missed rebuild, but this results in unnnecessary rebuilds with the packaging targets. Which is still more correct than the previous logic, but also very annoying" * 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kbuild: Initialize exported variables
2016-06-27dax: fix offset overflow in dax_ioEric Sandeen
This isn't functionally apparent for some reason, but when we test io at extreme offsets at the end of the loff_t rang, such as in fstests xfs/071, the calculation of "max" in dax_io() can be wrong due to pos + size overflowing. For example, # xfs_io -c "pwrite 9223372036854771712 512" /mnt/test/file enters dax_io with: start 0x7ffffffffffff000 end 0x7ffffffffffff200 and the rounded up "size" variable is 0x1000. This yields: pos + size 0x8000000000000000 (overflows loff_t) end 0x7ffffffffffff200 Due to the overflow, the min() function picks the wrong value for the "max" variable, and when we send (max - pos) into i.e. copy_from_iter_pmem() it is also the wrong value. This somehow(tm) gets magically absorbed without incident, probably because iter->count is correct. But it seems best to fix it up properly by comparing the two values as unsigned. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-06-27Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs fixes from Steve French: "Various small cifs/smb3 fixes, include some for stable, and some from the recent SMB3 test event" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: File names with trailing period or space need special case conversion Fix reconnect to not defer smb3 session reconnect long after socket reconnect cifs: check hash calculating succeeded cifs: dynamic allocation of ntlmssp blob cifs: use CIFS_MAX_DOMAINNAME_LEN when converting the domain name cifs: stuff the fl_owner into "pid" field in the lock request
2016-06-27Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes the following issues: - Missing length check for user-space GETALG request - Bogus memmove length in ux500 driver - Incorrect priority setting for vmx driver - Incorrect ABI selection for vmx driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: user - re-add size check for CRYPTO_MSG_GETALG crypto: ux500 - memmove the right size crypto: vmx - Increase priority of aes-cbc cipher crypto: vmx - Fix ABI detection
2016-06-27USB: don't free bandwidth_mutex too earlyAlan Stern
The USB core contains a bug that can show up when a USB-3 host controller is removed. If the primary (USB-2) hcd structure is released before the shared (USB-3) hcd, the core will try to do a double-free of the common bandwidth_mutex. The problem was described in graphical form by Chung-Geol Kim, who first reported it: ================================================= At *remove USB(3.0) Storage sequence <1> --> <5> ((Problem Case)) ================================================= VOLD ------------------------------------|------------ (uevent) ________|_________ |<1> | |dwc3_otg_sm_work | |usb_put_hcd | |peer_hcd(kref=2)| |__________________| ________|_________ |<2> | |New USB BUS #2 | | | |peer_hcd(kref=1) | | | --(Link)-bandXX_mutex| | |__________________| | ___________________ | |<3> | | |dwc3_otg_sm_work | | |usb_put_hcd | | |primary_hcd(kref=1)| | |___________________| | _________|_________ | |<4> | | |New USB BUS #1 | | |hcd_release | | |primary_hcd(kref=0)| | | | | |bandXX_mutex(free) |<- |___________________| (( VOLD )) ______|___________ |<5> | | SCSI | |usb_put_hcd | |peer_hcd(kref=0) | |*hcd_release | |bandXX_mutex(free*)|<- double free |__________________| ================================================= This happens because hcd_release() frees the bandwidth_mutex whenever it sees a primary hcd being released (which is not a very good idea in any case), but in the course of releasing the primary hcd, it changes the pointers in the shared hcd in such a way that the shared hcd will appear to be primary when it gets released. This patch fixes the problem by changing hcd_release() so that it deallocates the bandwidth_mutex only when the _last_ hcd structure referencing it is released. The patch also removes an unnecessary test, so that when an hcd is released, both the shared_hcd and primary_hcd pointers in the hcd's peer will be cleared. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Chung-Geol Kim <chunggeol.kim@samsung.com> Tested-by: Chung-Geol Kim <chunggeol.kim@samsung.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-27vsock: make listener child lock ordering explicitStefan Hajnoczi
There are several places where the listener and pending or accept queue child sockets are accessed at the same time. Lockdep is unhappy that two locks from the same class are held. Tell lockdep that it is safe and document the lock ordering. Originally Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> sent a similar patch asking whether this is safe. I have audited the code and also covered the vsock_pending_work() function. Suggested-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-27ipv6: enforce egress device match in per table nexthop lookupsPaolo Abeni
with the commit 8c14586fc320 ("net: ipv6: Use passed in table for nexthop lookups"), net hop lookup is first performed on route creation in the passed-in table. However device match is not enforced in table lookup, so the found route can be later discarded due to egress device mismatch and no global lookup will be performed. This cause the following to fail: ip link add dummy1 type dummy ip link add dummy2 type dummy ip link set dummy1 up ip link set dummy2 up ip route add 2001:db8:8086::/48 dev dummy1 metric 20 ip route add 2001:db8:d34d::/64 via 2001:db8:8086::2 dev dummy1 metric 20 ip route add 2001:db8:8086::/48 dev dummy2 metric 21 ip route add 2001:db8:d34d::/64 via 2001:db8:8086::2 dev dummy2 metric 21 RTNETLINK answers: No route to host This change fixes the issue enforcing device lookup in ip6_nh_lookup_table() v1->v2: updated commit message title Fixes: 8c14586fc320 ("net: ipv6: Use passed in table for nexthop lookups") Reported-and-tested-by: Beniamino Galvani <bgalvani@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-27Merge tag 'linux-can-fixes-for-4.7-20160623' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2016-06-23 this is a pull request of 3 patches for the upcoming linux-4.7 release. The first two patches are by Oliver Hartkopp fixing oopes in the generic CAN device netlink handling. Jimmy Assarsson's patch for the kvaser_usb driver adds support for more devices by adding their USB product ids. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-27KVM: nVMX: VMX instructions: fix segment checks when L1 is in long mode.Quentin Casasnovas
I couldn't get Xen to boot a L2 HVM when it was nested under KVM - it was getting a GP(0) on a rather unspecial vmread from Xen: (XEN) ----[ Xen-4.7.0-rc x86_64 debug=n Not tainted ]---- (XEN) CPU: 1 (XEN) RIP: e008:[<ffff82d0801e629e>] vmx_get_segment_register+0x14e/0x450 (XEN) RFLAGS: 0000000000010202 CONTEXT: hypervisor (d1v0) (XEN) rax: ffff82d0801e6288 rbx: ffff83003ffbfb7c rcx: fffffffffffab928 (XEN) rdx: 0000000000000000 rsi: 0000000000000000 rdi: ffff83000bdd0000 (XEN) rbp: ffff83000bdd0000 rsp: ffff83003ffbfab0 r8: ffff830038813910 (XEN) r9: ffff83003faf3958 r10: 0000000a3b9f7640 r11: ffff83003f82d418 (XEN) r12: 0000000000000000 r13: ffff83003ffbffff r14: 0000000000004802 (XEN) r15: 0000000000000008 cr0: 0000000080050033 cr4: 00000000001526e0 (XEN) cr3: 000000003fc79000 cr2: 0000000000000000 (XEN) ds: 0000 es: 0000 fs: 0000 gs: 0000 ss: 0000 cs: e008 (XEN) Xen code around <ffff82d0801e629e> (vmx_get_segment_register+0x14e/0x450): (XEN) 00 00 41 be 02 48 00 00 <44> 0f 78 74 24 08 0f 86 38 56 00 00 b8 08 68 00 (XEN) Xen stack trace from rsp=ffff83003ffbfab0: ... (XEN) Xen call trace: (XEN) [<ffff82d0801e629e>] vmx_get_segment_register+0x14e/0x450 (XEN) [<ffff82d0801f3695>] get_page_from_gfn_p2m+0x165/0x300 (XEN) [<ffff82d0801bfe32>] hvmemul_get_seg_reg+0x52/0x60 (XEN) [<ffff82d0801bfe93>] hvm_emulate_prepare+0x53/0x70 (XEN) [<ffff82d0801ccacb>] handle_mmio+0x2b/0xd0 (XEN) [<ffff82d0801be591>] emulate.c#_hvm_emulate_one+0x111/0x2c0 (XEN) [<ffff82d0801cd6a4>] handle_hvm_io_completion+0x274/0x2a0 (XEN) [<ffff82d0801f334a>] __get_gfn_type_access+0xfa/0x270 (XEN) [<ffff82d08012f3bb>] timer.c#add_entry+0x4b/0xb0 (XEN) [<ffff82d08012f80c>] timer.c#remove_entry+0x7c/0x90 (XEN) [<ffff82d0801c8433>] hvm_do_resume+0x23/0x140 (XEN) [<ffff82d0801e4fe7>] vmx_do_resume+0xa7/0x140 (XEN) [<ffff82d080164aeb>] context_switch+0x13b/0xe40 (XEN) [<ffff82d080128e6e>] schedule.c#schedule+0x22e/0x570 (XEN) [<ffff82d08012c0cc>] softirq.c#__do_softirq+0x5c/0x90 (XEN) [<ffff82d0801602c5>] domain.c#idle_loop+0x25/0x50 (XEN) (XEN) (XEN) **************************************** (XEN) Panic on CPU 1: (XEN) GENERAL PROTECTION FAULT (XEN) [error_code=0000] (XEN) **************************************** Tracing my host KVM showed it was the one injecting the GP(0) when emulating the VMREAD and checking the destination segment permissions in get_vmx_mem_address(): 3) | vmx_handle_exit() { 3) | handle_vmread() { 3) | nested_vmx_check_permission() { 3) | vmx_get_segment() { 3) 0.074 us | vmx_read_guest_seg_base(); 3) 0.065 us | vmx_read_guest_seg_selector(); 3) 0.066 us | vmx_read_guest_seg_ar(); 3) 1.636 us | } 3) 0.058 us | vmx_get_rflags(); 3) 0.062 us | vmx_read_guest_seg_ar(); 3) 3.469 us | } 3) | vmx_get_cs_db_l_bits() { 3) 0.058 us | vmx_read_guest_seg_ar(); 3) 0.662 us | } 3) | get_vmx_mem_address() { 3) 0.068 us | vmx_cache_reg(); 3) | vmx_get_segment() { 3) 0.074 us | vmx_read_guest_seg_base(); 3) 0.068 us | vmx_read_guest_seg_selector(); 3) 0.071 us | vmx_read_guest_seg_ar(); 3) 1.756 us | } 3) | kvm_queue_exception_e() { 3) 0.066 us | kvm_multiple_exception(); 3) 0.684 us | } 3) 4.085 us | } 3) 9.833 us | } 3) + 10.366 us | } Cross-checking the KVM/VMX VMREAD emulation code with the Intel Software Developper Manual Volume 3C - "VMREAD - Read Field from Virtual-Machine Control Structure", I found that we're enforcing that the destination operand is NOT located in a read-only data segment or any code segment when the L1 is in long mode - BUT that check should only happen when it is in protected mode. Shuffling the code a bit to make our emulation follow the specification allows me to boot a Xen dom0 in a nested KVM and start HVM L2 guests without problems. Fixes: f9eb4af67c9d ("KVM: nVMX: VMX instructions: add checks for #GP/#SS exceptions") Signed-off-by: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Eugene Korenevsky <ekorenevsky@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-27KVM: LAPIC: cap __delay at lapic_timer_advance_nsMarcelo Tosatti
The host timer which emulates the guest LAPIC TSC deadline timer has its expiration diminished by lapic_timer_advance_ns nanoseconds. Therefore if, at wait_lapic_expire, a difference larger than lapic_timer_advance_ns is encountered, delay at most lapic_timer_advance_ns. This fixes a problem where the guest can cause the host to delay for large amounts of time. Reported-by: Alan Jenkins <alan.christopher.jenkins@gmail.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-27KVM: x86: move nsec_to_cycles from x86.c to x86.hMarcelo Tosatti
Move the inline function nsec_to_cycles from x86.c to x86.h, as the next patch uses it from lapic.c. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-27pvclock: Get rid of __pvclock_read_cycles in function pvclock_read_flagsMinfei Huang
There is a generic function __pvclock_read_cycles to be used to get both flags and cycles. For function pvclock_read_flags, it's useless to get cycles value. To make this function be more effective, get this variable flags directly in function. Signed-off-by: Minfei Huang <mnghuan@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-27pvclock: Cleanup to remove function pvclock_get_nsec_offsetMinfei Huang
Function __pvclock_read_cycles is short enough, so there is no need to have another function pvclock_get_nsec_offset to calculate tsc delta. It's better to combine it into function __pvclock_read_cycles. Remove useless variables in function __pvclock_read_cycles. Signed-off-by: Minfei Huang <mnghuan@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-27pvclock: Add CPU barriers to get correct version valueMinfei Huang
Protocol for the "version" fields is: hypervisor raises it (making it uneven) before it starts updating the fields and raises it again (making it even) when it is done. Thus the guest can make sure the time values it got are consistent by checking the version before and after reading them. Add CPU barries after getting version value just like what function vread_pvclock does, because all of callees in this function is inline. Fixes: 502dfeff239e8313bfbe906ca0a1a6827ac8481b Cc: stable@vger.kernel.org Signed-off-by: Minfei Huang <mnghuan@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-06-27make nfs_atomic_open() call d_drop() on all ->open_context() errors.Al Viro
In "NFSv4: Move dentry instantiation into the NFSv4-specific atomic open code" unconditional d_drop() after the ->open_context() had been removed. It had been correct for success cases (there ->open_context() itself had been doing dcache manipulations), but not for error ones. Only one of those (ENOENT) got a compensatory d_drop() added in that commit, but in fact it should've been done for all errors. As it is, the case of O_CREAT non-exclusive open on a hashed negative dentry racing with e.g. symlink creation from another client ended up with ->open_context() getting an error and proceeding to call nfs_lookup(). On a hashed dentry, which would've instantly triggered BUG_ON() in d_materialise_unique() (or, these days, its equivalent in d_splice_alias()). Cc: stable@vger.kernel.org # v3.10+ Tested-by: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-06-27iommu/amd: Initialize devid variable before using itNicolas Iooss
Commit 2a0cb4e2d423 ("iommu/amd: Add new map for storing IVHD dev entry type HID") added a call to DUMP_printk in init_iommu_from_acpi() which used the value of devid before this variable was initialized. Fixes: 2a0cb4e2d423 ('iommu/amd: Add new map for storing IVHD dev entry type HID') Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-06-27iommu/vt-d: Fix overflow of iommu->domains arrayJan Niehusmann
The valid range of 'did' in get_iommu_domain(*iommu, did) is 0..cap_ndoms(iommu->cap), so don't exceed that range in free_all_cpu_cached_iovas(). The user-visible impact of the out-of-bounds access is the machine hanging on suspend-to-ram. It is, in fact, a kernel panic, but due to already suspended devices, that's often not visible to the user. Fixes: 22e2f9fa63b0 ("iommu/vt-d: Use per-cpu IOVA caching") Signed-off-by: Jan Niehusmann <jan@gondor.com> Tested-By: Marius Vlad <marius.c.vlad@intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-06-27KVM: arm/arm64: Stop leaking vcpu pid referencesJames Morse
kvm provides kvm_vcpu_uninit(), which amongst other things, releases the last reference to the struct pid of the task that was last running the vcpu. On arm64 built with CONFIG_DEBUG_KMEMLEAK, starting a guest with kvmtool, then killing it with SIGKILL results (after some considerable time) in: > cat /sys/kernel/debug/kmemleak > unreferenced object 0xffff80007d5ea080 (size 128): > comm "lkvm", pid 2025, jiffies 4294942645 (age 1107.776s) > hex dump (first 32 bytes): > 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ > 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ > backtrace: > [<ffff8000001b30ec>] create_object+0xfc/0x278 > [<ffff80000071da34>] kmemleak_alloc+0x34/0x70 > [<ffff80000019fa2c>] kmem_cache_alloc+0x16c/0x1d8 > [<ffff8000000d0474>] alloc_pid+0x34/0x4d0 > [<ffff8000000b5674>] copy_process.isra.6+0x79c/0x1338 > [<ffff8000000b633c>] _do_fork+0x74/0x320 > [<ffff8000000b66b0>] SyS_clone+0x18/0x20 > [<ffff800000085cb0>] el0_svc_naked+0x24/0x28 > [<ffffffffffffffff>] 0xffffffffffffffff On x86 kvm_vcpu_uninit() is called on the path from kvm_arch_destroy_vm(), on arm no equivalent call is made. Add the call to kvm_arch_vcpu_free(). Signed-off-by: James Morse <james.morse@arm.com> Fixes: 749cf76c5a36 ("KVM: ARM: Initial skeleton to compile KVM support") Cc: <stable@vger.kernel.org> # 3.10+ Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-06-27iommu/iova: Disable preemption around use of this_cpu_ptr()Chris Wilson
Between acquiring the this_cpu_ptr() and using it, ideally we don't want to be preempted and work on another CPU's private data. this_cpu_ptr() checks whether or not preemption is disable, and get_cpu_ptr() provides a convenient wrapper for operating on the cpu ptr inside a preemption disabled critical section (which currently is provided by the spinlock). [ 167.997877] BUG: using smp_processor_id() in preemptible [00000000] code: usb-storage/216 [ 167.997940] caller is debug_smp_processor_id+0x17/0x20 [ 167.997945] CPU: 7 PID: 216 Comm: usb-storage Tainted: G U 4.7.0-rc1-gfxbench-RO_Patchwork_1057+ #1 [ 167.997948] Hardware name: Hewlett-Packard HP Pro 3500 Series/2ABF, BIOS 8.11 10/24/2012 [ 167.997951] 0000000000000000 ffff880118b7f9c8 ffffffff8140dca5 0000000000000007 [ 167.997958] ffffffff81a3a7e9 ffff880118b7f9f8 ffffffff8142a927 0000000000000000 [ 167.997965] ffff8800d499ed58 0000000000000001 00000000000fffff ffff880118b7fa08 [ 167.997971] Call Trace: [ 167.997977] [<ffffffff8140dca5>] dump_stack+0x67/0x92 [ 167.997981] [<ffffffff8142a927>] check_preemption_disabled+0xd7/0xe0 [ 167.997985] [<ffffffff8142a947>] debug_smp_processor_id+0x17/0x20 [ 167.997990] [<ffffffff81507e17>] alloc_iova_fast+0xb7/0x210 [ 167.997994] [<ffffffff8150c55f>] intel_alloc_iova+0x7f/0xd0 [ 167.997998] [<ffffffff8151021d>] intel_map_sg+0xbd/0x240 [ 167.998002] [<ffffffff810e5efd>] ? debug_lockdep_rcu_enabled+0x1d/0x20 [ 167.998009] [<ffffffff81596059>] usb_hcd_map_urb_for_dma+0x4b9/0x5a0 [ 167.998013] [<ffffffff81596d19>] usb_hcd_submit_urb+0xe9/0xaa0 [ 167.998017] [<ffffffff810cff2f>] ? mark_held_locks+0x6f/0xa0 [ 167.998022] [<ffffffff810d525c>] ? __raw_spin_lock_init+0x1c/0x50 [ 167.998025] [<ffffffff810e5efd>] ? debug_lockdep_rcu_enabled+0x1d/0x20 [ 167.998028] [<ffffffff815988f3>] usb_submit_urb+0x3f3/0x5a0 [ 167.998032] [<ffffffff810d0082>] ? trace_hardirqs_on_caller+0x122/0x1b0 [ 167.998035] [<ffffffff81599ae7>] usb_sg_wait+0x67/0x150 [ 167.998039] [<ffffffff815dc202>] usb_stor_bulk_transfer_sglist.part.3+0x82/0xd0 [ 167.998042] [<ffffffff815dc29c>] usb_stor_bulk_srb+0x4c/0x60 [ 167.998045] [<ffffffff815dc42e>] usb_stor_Bulk_transport+0x17e/0x420 [ 167.998049] [<ffffffff815dcf32>] usb_stor_invoke_transport+0x242/0x540 [ 167.998052] [<ffffffff810e5efd>] ? debug_lockdep_rcu_enabled+0x1d/0x20 [ 167.998058] [<ffffffff815dba19>] usb_stor_transparent_scsi_command+0x9/0x10 [ 167.998061] [<ffffffff815de518>] usb_stor_control_thread+0x158/0x260 [ 167.998064] [<ffffffff815de3c0>] ? fill_inquiry_response+0x20/0x20 [ 167.998067] [<ffffffff815de3c0>] ? fill_inquiry_response+0x20/0x20 [ 167.998071] [<ffffffff8109ddfa>] kthread+0xea/0x100 [ 167.998078] [<ffffffff817ac6af>] ret_from_fork+0x1f/0x40 [ 167.998081] [<ffffffff8109dd10>] ? kthread_create_on_node+0x1f0/0x1f0 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96293 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: iommu@lists.linux-foundation.org Cc: linux-kernel@vger.kernel.org Fixes: 9257b4a206fc ('iommu/iova: introduce per-cpu caching to iova allocation') Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-06-27arm64: KVM: fix build with CONFIG_ARM_PMU disabledSudeep Holla
When CONFIG_ARM_PMU is disabled, we get the following build error: arch/arm64/kvm/sys_regs.c: In function 'pmu_counter_idx_valid': arch/arm64/kvm/sys_regs.c:564:27: error: 'ARMV8_PMU_CYCLE_IDX' undeclared (first use in this function) if (idx >= val && idx != ARMV8_PMU_CYCLE_IDX) ^ arch/arm64/kvm/sys_regs.c:564:27: note: each undeclared identifier is reported only once for each function it appears in arch/arm64/kvm/sys_regs.c: In function 'access_pmu_evcntr': arch/arm64/kvm/sys_regs.c:592:10: error: 'ARMV8_PMU_CYCLE_IDX' undeclared (first use in this function) idx = ARMV8_PMU_CYCLE_IDX; ^ arch/arm64/kvm/sys_regs.c: In function 'access_pmu_evtyper': arch/arm64/kvm/sys_regs.c:638:14: error: 'ARMV8_PMU_CYCLE_IDX' undeclared (first use in this function) if (idx == ARMV8_PMU_CYCLE_IDX) ^ arch/arm64/kvm/hyp/switch.c:86:15: error: 'ARMV8_PMU_USERENR_MASK' undeclared (first use in this function) write_sysreg(ARMV8_PMU_USERENR_MASK, pmuserenr_el0); This patch fixes the build with CONFIG_ARM_PMU disabled. Cc: Christoffer Dall <christoffer.dall@linaro.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
2016-06-27powerpc/tm: Always reclaim in start_thread() for exec() class syscallsCyril Bur
Userspace can quite legitimately perform an exec() syscall with a suspended transaction. exec() does not return to the old process, rather it load a new one and starts that, the expectation therefore is that the new process starts not in a transaction. Currently exec() is not treated any differently to any other syscall which creates problems. Firstly it could allow a new process to start with a suspended transaction for a binary that no longer exists. This means that the checkpointed state won't be valid and if the suspended transaction were ever to be resumed and subsequently aborted (a possibility which is exceedingly likely as exec()ing will likely doom the transaction) the new process will jump to invalid state. Secondly the incorrect attempt to keep the transactional state while still zeroing state for the new process creates at least two TM Bad Things. The first triggers on the rfid to return to userspace as start_thread() has given the new process a 'clean' MSR but the suspend will still be set in the hardware MSR. The second TM Bad Thing triggers in __switch_to() as the processor is still transactionally suspended but __switch_to() wants to zero the TM sprs for the new process. This is an example of the outcome of calling exec() with a suspended transaction. Note the first 700 is likely the first TM bad thing decsribed earlier only the kernel can't report it as we've loaded userspace registers. c000000000009980 is the rfid in fast_exception_return() Bad kernel stack pointer 3fffcfa1a370 at c000000000009980 Oops: Bad kernel stack pointer, sig: 6 [#1] CPU: 0 PID: 2006 Comm: tm-execed Not tainted NIP: c000000000009980 LR: 0000000000000000 CTR: 0000000000000000 REGS: c00000003ffefd40 TRAP: 0700 Not tainted MSR: 8000000300201031 <SF,ME,IR,DR,LE,TM[SE]> CR: 00000000 XER: 00000000 CFAR: c0000000000098b4 SOFTE: 0 PACATMSCRATCH: b00000010000d033 GPR00: 0000000000000000 00003fffcfa1a370 0000000000000000 0000000000000000 GPR04: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR12: 00003fff966611c0 0000000000000000 0000000000000000 0000000000000000 NIP [c000000000009980] fast_exception_return+0xb0/0xb8 LR [0000000000000000] (null) Call Trace: Instruction dump: f84d0278 e9a100d8 7c7b03a6 e84101a0 7c4ff120 e8410170 7c5a03a6 e8010070 e8410080 e8610088 e8810090 e8210078 <4c000024> 48000000 e8610178 88ed023b Kernel BUG at c000000000043e80 [verbose debug info unavailable] Unexpected TM Bad Thing exception at c000000000043e80 (msr 0x201033) Oops: Unrecoverable exception, sig: 6 [#2] CPU: 0 PID: 2006 Comm: tm-execed Tainted: G D task: c0000000fbea6d80 ti: c00000003ffec000 task.ti: c0000000fb7ec000 NIP: c000000000043e80 LR: c000000000015a24 CTR: 0000000000000000 REGS: c00000003ffef7e0 TRAP: 0700 Tainted: G D MSR: 8000000300201033 <SF,ME,IR,DR,RI,LE,TM[SE]> CR: 28002828 XER: 00000000 CFAR: c000000000015a20 SOFTE: 0 PACATMSCRATCH: b00000010000d033 GPR00: 0000000000000000 c00000003ffefa60 c000000000db5500 c0000000fbead000 GPR04: 8000000300001033 2222222222222222 2222222222222222 00000000ff160000 GPR08: 0000000000000000 800000010000d033 c0000000fb7e3ea0 c00000000fe00004 GPR12: 0000000000002200 c00000000fe00000 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 c0000000fbea7410 00000000ff160000 GPR24: c0000000ffe1f600 c0000000fbea8700 c0000000fbea8700 c0000000fbead000 GPR28: c000000000e20198 c0000000fbea6d80 c0000000fbeab680 c0000000fbea6d80 NIP [c000000000043e80] tm_restore_sprs+0xc/0x1c LR [c000000000015a24] __switch_to+0x1f4/0x420 Call Trace: Instruction dump: 7c800164 4e800020 7c0022a6 f80304a8 7c0222a6 f80304b0 7c0122a6 f80304b8 4e800020 e80304a8 7c0023a6 e80304b0 <7c0223a6> e80304b8 7c0123a6 4e800020 This fixes CVE-2016-5828. Fixes: bc2a9408fa65 ("powerpc: Hook in new transactional memory code") Cc: stable@vger.kernel.org # v3.9+ Signed-off-by: Cyril Bur <cyrilbur@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-27net: smsc911x: Fix bug where PHY interrupts are overwritten by 0Jeremy Linton
By default, mdiobus_alloc() sets the PHYs to polling mode, but a pointer size memcpy means that a couple IRQs end up being overwritten with a value of 0. This means that PHY_POLL is disabled and results in unpredictable behavior depending on the PHY's location on the MDIO bus. Remove that memcpy and the now unused phy_irq member to force the SMSC911x PHYs into polling mode 100% of the time. Fixes: e7f4dc3536a4 ("mdio: Move allocation of interrupts into core") Signed-off-by: Jeremy Linton <jeremy.linton@arm.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-26Linux 4.7-rc5v4.7-rc5Linus Torvalds
2016-06-26usb: renesas_usbhs: make usbhs_write32() staticBen Dooks
The usbhs_write32 function is not used outside of the rcar3.c file, so fix the following sparse warning by making it static: drivers/usb/renesas_usbhs/rcar3.c:26:6: warning: symbol 'usbhs_write32' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-26usb: early/ehci-dbgp: make it explicitly non-modularPaul Gortmaker
The Kconfig currently controlling compilation of this code is: arch/x86/Kconfig.debug:config EARLY_PRINTK_DBGP arch/x86/Kconfig.debug: bool "Early printk via EHCI debug port" ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modularity so that when reading the driver there is no doubt it is builtin-only. Since module_init translates to device_initcall in the non-modular case, the init ordering remains unchanged with this commit. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: linux-usb@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-26xhci: get rid of platform dataHeikki Krogerus
No more users for it. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-26usb: dwc3: host: use build-in property instead of platform dataHeikki Krogerus
This should allow xhci to remove handling of platform data. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-26xhci: plat: adapt to unified device property interfaceHeikki Krogerus
Requesting the only property that the driver needs using the unified device property interface so it will be available for all types of platforms, not just the ones using DT. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-26xhci: rename and simplify last_trb_on_last_seg() helperMathias Nyman
It's only used with rings that have link trbs Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-26xhci: remove enqueue_is_link() helperMathias Nyman
Only used in one place, replace with trb_is_link() helper Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-26xhci: rework inc_deq() and fix off by one error.Mathias Nyman
inc_deq() is called both for rings with link trbs and the event ring without link trbs. The last_trb() check in inc_deq() has a off by one error, going beyond allocated array when checking if trb == [TRBS_PER_SEGMENT], and the whole inc_deq() depend on this. Rewrite the inc_deq() funciton, remove the faulty last_trb() helper, add new last_trb_on_seg() and last_trb_on_ring() helpers Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-26xhci: use and add separate function for checking for link trbsMathias Nyman
Add a new is_link_trb() function that only checks for link trbs. We want to split generic last_trb() function which is used for both event rings without link trbs, and endpoint and command rings with links. This will allow us to easier check for link trbs added mid segments. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-26xhci: clean up event ring checks from inc_enq()Mathias Nyman
Remove the event ring related checks in inc_enq() Host hardware is the producer of events on the event ring, driver will not queue anything, or call inc_enq() for the event ring. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-26xhci: TD-fragment, align the unsplittable case with a bounce bufferMathias Nyman
If the last trb before a link is not packet size aligned, and is not splittable then use a bounce buffer for that chunk of max packet size unalignable data. Allocate a max packet size bounce buffer for every segment of a bulk endpoint ring at the same time as allocating the ring. If we need to align the data before the link trb in that segment then copy the data to the segment bounce buffer, dma map it, and enqueue it. Once the td finishes, or is cancelled, unmap it. For in transfers we need to first map the bounce buffer, then queue it, after it finishes, copy the bounce buffer to the original sg list, and finally unmap it Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-26xhci: align the last trb before link if it is easily splittable.Mathias Nyman
TD fragments section 4.11.7.1 in xhci specs have additional requirements on how trbs in TDs must be organized. TD fragments shall not span transfer ring segments and TD fragments must be packet aligned. Normally we don't care about TD fragments, on TD is one big fragment, but if a TD spans ring segments it will be treated as two fragments, and we need to comply with the alignment requirements. For us this means that the payload data must be packet aligned in the last trb before a link trb. In most mass storage bulk tranfers we are lucky as the block size aligns nicely with packet size, and there are no issues. However, usb network adapters using scatterlists can hit this alignment issue, and usbtest in kernel triggers this in minutes. This patch is a partial solution, it solves the easy case when the last trb before the link trb contains a packet boundary. If that is the case then just split the trb at the boundary. If not, then just print a debug message and continue as we have always done, hoping for the best Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-26xhci: don't rely on precalculated value of needed trbs in the enqueue loopMathias Nyman
Queue trbs until all payload data in the urb is tranferred. The actual number of trbs might need to change from the pre-calculated number when the packet alignment restrictions for td fragments in xhci 4.11.7.1 are taken into account. Long term plan is to get rid of calculating the needed trbs in advance all together. It's an unnecessary extra walk through the scatterlist. This change also allows some bulk queue function simplifications Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-26xhci: use boolean to indicate last trb in td remainder calculationMathias Nyman
We only need to know if we are queuing the last trb for a TD when calculating the td remainder field. The total number of trbs left is not used. We won't be able to trust the pre-calculated number of trbs used if we need to align trb data by splitting or merging trbs in order to satisfy comply with data alignment requirements in xhci specs section 4.11.7.1. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-26xhci: properly prepare zero packet TD after normal bulk TD.Mathias Nyman
If a zero-length packet is needed after a bulk transfer, then an additional zero length TD was prepared before enqueueing the bulk transfer This set up the zero packet TD structure with incorrect td->start_seg and td->first_trb pointers. Prepare the zero packet TD after the data bulk TD is enqueued instead. It sets these pointers correctly. This change also simplifies unnecessary complexity related to keeping track of the last trb when enqueuing trbs. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-26xhci: rename ep_ring variable in queue_bulk_tx(), no functional changeMathias Nyman
Tiny change, a bit more readable. The real reason for this change is that the coming td fragment work had several over 80 lines character lines split just because of a few extra characters in variable names. no functional changes Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 04:05:44 +0000