summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-11-23drm/amd/display: Limit HW cursor size of >= 4kAlvin Lee
[Description] - For SubVP, we cannot support HW cursor if it's greater than 64 x 64 x 4 bytes in size - However, on certain config changes (i.e. pixel format) we can exit SubVP (then change to HW cursor) then re-enter SubVP without changing back to SW cursor because there is no SetCursorAttributes call - To workaround this issue, limit the HW cursor size to be less than 64 x 64 x 4 bytes whenever the stream is >= 4K - Also ensure this W/A only affects DCN that supports SubVP Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: No display after resume from WB/CBTsung-hua Lin
[why] First MST sideband message returns AUX_RET_ERROR_HPD_DISCON on certain intel platform. Aux transaction considered failure if HPD unexpected pulled low. The actual aux transaction success in such case, hence do not return error. [how] Not returning error when AUX_RET_ERROR_HPD_DISCON detected on the first sideband message. v2: squash in fix (Alex) Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Tsung-hua Lin <Tsung-hua.Lin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: Add margin on DRR vblank start for subvpAlvin Lee
[Description] - Add margin for HUBP "jitter" for SubVp + DRR case - Also do a min transition even if MPO is added on a non SubVP pipe (i.e. added on DRR pipe for SubVP + DRR) Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: new ABM config 2Camille Cho
[Why & How] Add configuration 2 for ABM 2.3/2.4 to suit customer preferences, which is to lower the brightness curves in 80%-100% range compared to the existing default config 0. Reviewed-by: Josip Pavic <Josip.Pavic@amd.com> Acked-by: Brian Chang <Brian.Chang@amd.com> Signed-off-by: Camille Cho <Camille.Cho@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/dc/dce120: Fix audio register mapping, stop triggering KASANLyude Paul
There's been a very long running bug that seems to have been neglected for a while, where amdgpu consistently triggers a KASAN error at start: BUG: KASAN: global-out-of-bounds in read_indirect_azalia_reg+0x1d4/0x2a0 [amdgpu] Read of size 4 at addr ffffffffc2274b28 by task modprobe/1889 After digging through amd's rather creative method for accessing registers, I eventually discovered the problem likely has to do with the fact that on my dce120 GPU there are supposedly 7 sets of audio registers. But we only define a register mapping for 6 sets. So, fix this and fix the KASAN warning finally. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amdgpu: fix pci device refcount leakYang Yingliang
As comment of pci_get_domain_bus_and_slot() says, it returns a pci device with refcount increment, when finish using it, the caller must decrement the reference count by calling pci_dev_put(). So before returning from amdgpu_device_resume|suspend_display_audio(), pci_dev_put() is called to avoid refcount leak. Fixes: 3f12acc8d6d4 ("drm/amdgpu: put the audio codec into suspend state before gpu reset V3") Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amdgpu/psp: don't free PSP buffers on suspendAlex Deucher
We can reuse the same buffers on resume. v2: squash in S4 fix from Shikai Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2213 Reviewed-by: Christian König <christian.koenig@amd.com> Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2022-11-23drm/amdgpu/dm/mst: Fix uninitialized var in ↵Lyude Paul
pre_compute_mst_dsc_configs_for_state() Coverity noticed this one, so let's fix it. Fixes: 7cce4cd628be ("drm/amdgpu/mst: Stop ignoring error codes and deadlocking") Signed-off-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Cc: stable@vger.kernel.org # v5.6+
2022-11-23drm/amd/amdgpu: reserve vm invalidation engine for firmwareJack Xiao
If mes enabled, reserve VM invalidation engine 5 for firmware. Signed-off-by: Jack Xiao <Jack.Xiao@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23drm/amd/display: fix compilation issue with legacy gccBob zhou
This patch is used to fix following compilation issue with legacy gcc error: ‘for’ loop initial declarations are only allowed in C99 mode for (int i = flag_vlevel; i < context->bw_ctx.dml.soc.num_states; i++) { Signed-off-by: Bob zhou <bobzhou2@amd.com> Reviewed-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-23Merge tag 'drm-intel-next-2022-11-18' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next GVT Changes: - gvt-next stuff mostly with refactor for the new MDEV interface. i915 Changes: - PSR fixes and improvements (Jouni) - DP DSC fixes (Vinod, Jouni) - More general display cleanups (Jani) - More display collor management cleanup targetting degamma (Ville) - remove circ_buf.h includes (Jiri) - wait power off delay at driver remove to optimize probe (Jani) - More audio cleanup targeting the ELD precompute readout (Ville) - Enable DC power states on all eDP ports (Imre) - RPL-P stepping info (Matt Atwood) - MTL enabling patches (RK) - Removal of DG2 force_probe (Matt) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y3f71obyEkImXoUF@intel.com
2022-11-22Merge tag 'drm-intel-gt-next-2022-11-18' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-next Core Changes: - Backmerge of drm-next Driver Changes: - Restore probe_range behaviour for userptr (Matt A) - Fix use-after-free on lmem_userfault_list (Matt A) - Never purge busy TTM objects (Matt A) - Meteorlake enabling (Daniele, Badal, Daniele, Stuart, Aravind, Alan) - Demote GuC kernel contexts to normal priority (John) - Use RC6 residency types as arguments to residency functions (Ashutosh, Rodrigo, Jani) - Convert some legacy DRM debugging macros to new ones (Tvrtko) - Don't deadlock GuC busyness stats vs reset (John) - Remove excessive line feeds in GuC state dumps (John) - Use i915_sg_dma_sizes() for all backends (Matt A) - Prefer REG_FIELD_GET in intel_rps_get_cagf (Ashutosh, Rodrigo) - Use GEN12_RPSTAT register for GT freq (Don, Badal, Ashutosh) - Remove unwanted TTM ghost obj check (Matt A) - Update workaround documentation (Lucas) - Coding style and static checker fixes and cleanups (Jani, Umesh, Tvrtko, Lucas, Andrzej) - Selftest improvements (Chris, Daniele, Riana, Andrzej) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Y3dMd9HDpfDehhWm@jlahtine-mobl.ger.corp.intel.com
2022-11-22Merge tag 'amd-drm-next-6.2-2022-11-18' of ↵Dave Airlie
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-6.2-2022-11-18: amdgpu: - SR-IOV fixes - Clean up DC checks - DCN 3.2.x fixes - DCN 3.1.x fixes - Don't enable degamma on asics which don't support it - IP discovery fixes - BACO fixes - Fix vbios allocation handling when vkms is enabled - Drop buggy tdr advanced mode GPU reset handling - Fix the build when DCN is not set in kconfig - MST DSC fixes - Userptr fixes - FRU and RAS EEPROM fixes - VCN 4.x RAS support - Aldrebaran CU occupancy reporting fix - PSP ring cleanup amdkfd: - Memory limit fix - Enable cooperative launch on gfx 10.3 amd-drm-next-6.2-2022-11-11: amdgpu: - SMU 13.x updates - GPUVM TLB race fix - DCN 3.1.4 updates - DCN 3.2.x updates - PSR fixes - Kerneldoc fix - Vega10 fan fix - GPUVM locking fixes in error pathes - BACO fix for Beige Goby - EEPROM I2C address cleanup - GFXOFF fix - Fix DC memory leak in error pathes - Flexible array updates - Mtype fix for GPUVM PTEs - Move Kconfig into amdgpu directory - SR-IOV updates - Fix possible memory leak in CS IOCTL error path amdkfd: - Fix possible memory overrun - CRIU fixes radeon: - ACPI ref count fix - HDA audio notifier support - Move Kconfig into radeon directory UAPI: - Add new GEM_CREATE flags to help to transition more KFD functionality to the DRM UAPI. These are used internally in the driver to align location based memory coherency requirements from memory allocated in the KFD with how we manage GPUVM PTEs. They are currently blocked in the GEM_CREATE IOCTL as we don't have a user right now. They are just used internally in the kernel driver for now for existing KFD memory allocations. So a change to the UAPI header, but no functional change in the UAPI. From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221118170807.6505-1-alexander.deucher@amd.com Signed-off-by: Dave Airlie <airlied@redhat.com>
2022-11-22Merge branch 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux into ↵Dave Airlie
drm-next please pull the following etnaviv changes for the next merge window. Mostly some small workarounds to get new hardware support going. But also more fixes to the softpin MMU handling and a nice addition from Christian to make the kernel logs on hang detection more useful. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Lucas Stach <l.stach@pengutronix.de> Link: https://patchwork.freedesktop.org/patch/msgid/adcb1b3dec89a18d6c3c4ee6e179b9b2c9f25046.camel@pengutronix.de
2022-11-22Merge tag 'drm-misc-next-2022-11-17' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 6.2: UAPI Changes: Cross-subsystem Changes: - fbdev: Add support for the nomodeset kernel parameter Core Changes: - client: Add kunit tests for drm_connector_pick_cmdline_mode() - dma-buf: Move dma_buf_mmap_internal() to new locking specification - edid: Dump EDID on drm_edid_get_panel_id() failure, Stop using a temporary device to load the EDID through the firmware mechanism - fb-helper: Remove damage worker - gem-vram: Fix deadlock in drm_gem_vram_vmap() - modes: Named mode parsing improvements - tests: Add Kunit helpers to create a DRM device Driver Changes: - hisilicon: convert to drm_mode_init() - malidp: Use drm-managed resources - msm: convert to drm_mode_init() and drm_mode_copy() - mtk: convert to drm_mode_init() - nouveau: Support backlight control for nva3 - rockchip: convert to drm_mode_copy() - sti: convert to drm_mode_copy() - v3d: Switch to drm-managed resources - vc4: Fix potential NULL pointer dereference - panels: - New panel: NewVision NV3051D Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20221117083628.mzij5nrbdzokek7c@houat
2022-11-18drm/i915/dg2: Drop force_probe requirementMatt Roper
DG2 has been very usable for a while now, and all of the uapi changes related to fundamental platform usage have been finalized. Recent CI results have also been healthy, so we're ready to drop the force_probe requirement and enable the platform by default. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221109001328.732000-1-matthew.d.roper@intel.com
2022-11-18drm/i915/mtl: Skip doubling channel numbers for LPDDR4/LPDDDR5Radhakrishna Sripada
MTL LPDDR5 reported 16b with 8 channels. Previous platforms reported 32b with 4 channels and hence needed a multiplication by a factor of 2. Skip increasing the channels for MTL. v2: Use version check instead of platform check(MattR) Bspec: 64631 Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221117213015.584417-2-radhakrishna.sripada@intel.com
2022-11-18drm/i915/mtl: Fix dram info readoutRadhakrishna Sripada
MEM_SS_INFO_GLOBAL Register info read from the hardware is cached in val. However the variable is being modified when determining the DRAM type thereby clearing out the channels and qgv info extracted later in the function xelpdp_get_dram_info. Preserve the register value and use extracted fields in the switch statement. Fixes: 825477e77912 ("drm/i915/mtl: Obtain SAGV values from MMIO instead of GT pcode mailbox") Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221117213015.584417-1-radhakrishna.sripada@intel.com
2022-11-18drm/i915/rpl-p: Add stepping infoMatt Atwood
Add stepping-substepping info in accordance to bpsec changes. Bspec: 55376 Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221117214132.152061-1-matthew.s.atwood@intel.com
2022-11-18drm/i915/mtl+: Don't enable the AUX_IO power for non-eDP port main linksImre Deak
MTL+ requires the AUX_IO power for the main link only on eDP, so don't enable it in other cases. v2: - Rebased on checking intel_encoder_can_psr() instead of crtc->has_psr. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221114122251.21327-10-imre.deak@intel.com
2022-11-18drm/i915: Factor out function to get/put AUX_IO power for main linkImre Deak
Factor out functions to get/put the AUX_IO power domain for the main link on DDI ports. While at it clarify the corresponding code comment. No functional change. v2: - s/(get/put)_aux_power_for_main_link/main_link_aux_power_domain_(get/put) (Jani) - Clarify in the code comment that AUX_IO is needed only by TypeC besides eDP/PSR. v3: - Rebased on checking intel_encoder_can_psr() instead of crtc->has_psr. v4: - Don't call fetch_and_zero() with side-effect during variable declaration. (Ville) Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221114122251.21327-9-imre.deak@intel.com
2022-11-18drm/i915: Add missing DC_OFF power domain->well mappingsImre Deak
Add the missing DC_OFF power domain -> DC_OFF power well mappings on all platforms. This didn't cause a problem as the DC_OFF power domain is only used on JSL, where the mapping was already correct. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221114122251.21327-8-imre.deak@intel.com
2022-11-18drm/i915: Add missing AUX_IO_A power domain->well mappingsImre Deak
BXT and GLK were missing the AUX_IO_A power domain -> PHY A common power well mapping, add these now. This didn't cause a problem as the AUX_IO_A and DDI_LANES_A power domains are acquired together. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221114122251.21327-7-imre.deak@intel.com
2022-11-18drm/i915/tgl+: Enable display DC power states on all eDP portsImre Deak
Starting with TGL eDP is supported on ports B+ (besides port A), so make sure DC states are not blocked on any such ports. For this add an AUX_IO_<port> power domain for each port with eDP support. These domains similarly to AUX_IO_A enable only the AUX_IO_<port> power well for an enabled port, whereas the existing AUX_<port> domains enable both the AUX_IO_<port> and the DC_OFF power wells as required by DP AUX transfers. v2: (Ville) - Split the change using AUX vs. AUX_IO on port A to a separate patch. - Select AUX_IO vs. AUX based on crtc_state->has_psr instead of is_edp(). v3: - Rebased on checking intel_encoder_can_psr() instead of crtc->has_psr. v4: - Fix warn in intel_display_power_aux_io_domain(). (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221114122251.21327-6-imre.deak@intel.com
2022-11-18drm/i915: Use the AUX_IO power domain only for eDP/PSR portImre Deak
Use the AUX_IO_A display power domain only for eDP on port A where PSR is also supported. This is the case where DC states need to be enabled while the output is enabled - ensured by AUX_IO_A domain not enabling the DC_OFF power well. Otherwise port A can be treated the same way as other ports with an external DP output: using the AUX_<port> domain which disables the unrequired DC states. This change prepares for the next patch enabling DC states on all ports supporting eDP/PSR besides port A. v2: - Check the encoder PSR capability instead of PSR being enabled in the crtc_state, as the latter can be changed with a fastset. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221114122251.21327-5-imre.deak@intel.com
2022-11-18drm/i915: Move the POWER_DOMAIN_AUX_IO_A definition to its logical placeImre Deak
Move the definition of the AUX_IO_A power domain, requiring only the corresponding AUX_IO_A power well to be enabled, before all the AUX_<port> power domains, which require both the AUX_IO_<port> and the DC_OFF power wells to be enabled. No functional change. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221114122251.21327-4-imre.deak@intel.com
2022-11-18drm/i915: Preallocate the debug power domain wakerefs arrayImre Deak
Since the current size of intel_display_power_domain_set struct is close to 1kB, it's better to use preallocated memory for it. The only user of the intel_display_power_get/put_in_set() allocating the struct on stack is hsw_get_pipe_config(), so we can avoid potential stack overallocations by moving the struct here to the preallocated intel_crtc struct (hsw_get_pipe_config() is non-reentrant wrt. each CRTC). This patch replaces https://lore.kernel.org/intel-gfx/20221107170917.3566758-5-imre.deak@intel.com/T/#md3f6cdf17fcd Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221114122251.21327-3-imre.deak@intel.com
2022-11-18drm/i915: Fix warn in intel_display_power_*_domain() functionsImre Deak
The intel_display_power_*_domain() functions should always warn if a default domain is returned as a fallback, fix this up. Spotted by Ville. Fixes: 979e1b32e0e2 ("drm/i915: Sanitize the port -> DDI/AUX power domain mapping for each platform") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jouni Högander <jouni.hogander@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221114122251.21327-2-imre.deak@intel.com
2022-11-17drm/amdgpu: make psp_ring_init commonAlex Deucher
All of the IP specific versions are the same now, so we can just use a common function. Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-17drm/amdgpu/psp12: move ih_reroute into ring_createAlex Deucher
This matches what we do for psp 3.1 and makes ring_init common for all PSP versions. Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-17drm/amd/display: fix kernel-doc issues in dc.hRandy Dunlap
Fix these kernel-doc complaints: drivers/gpu/drm/amd/display/dc/dc.h:505: warning: cannot understand function prototype: 'struct dc_clocks ' dc.h:472: warning: Enum value 'MPC_SPLIT_AVOID' not described in enum 'pipe_split_policy' dc.h:472: warning: Enum value 'MPC_SPLIT_AVOID_MULT_DISP' not described in enum 'pipe_split_policy' dc.h:532: warning: Incorrect use of kernel-doc format: * @fw_based_mclk_switching Fixes: ea76895ffab1 ("drm/amd/display: Document pipe split policy") Fixes: 1682bd1a6b5f ("drm/amd/display: Expand kernel doc for DC") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: David Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-17drm/amdkfd: enable cooperative launch for gfx10.3Jonathan Kim
FW fix available to enable cooperative launch for GFX10.3. Signed-off-by: Jonathan Kim <jonathan.kim@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-17drm/amdgpu: Enable Aldebaran devices to report CU OccupancyRamesh Errabolu
Allow user to know number of compute units (CU) that are in use at any given moment. Enable access to the method kgd_gfx_v9_get_cu_occupancy that computes CU occupancy. Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-17drm/amdgpu: add JPEG 4.0 RAS poison consumption handlingTao Zhou
Register related irq handler. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-17drm/amdgpu: add VCN 4.0 RAS poison consumption handlingTao Zhou
Register irq handler. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-17drm/amdgpu: add irq source id definition for VCN/JPEG 4.0Tao Zhou
Add interrupt source id macros. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-17drm/amdgpu: add RAS error query for JPEG 4.0Tao Zhou
Initialize JPEG RAS structure and add error query interface. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-17drm/amdgpu: add RAS query support for VCN 4.0Tao Zhou
Initialize VCN RAS structure and add RAS status query function. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-17drm/amdgpu: define common jpeg_set_ras_funcsTao Zhou
Make the code reusable. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-17drm/amdgpu: define common vcn_set_ras_funcsTao Zhou
So the code can be reused. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-17drm/amdgpu: enable RAS for VCN/JPEG v4.0Tao Zhou
Set support flag for VCN/JPEG 4.0. Signed-off-by: Tao Zhou <tao.zhou1@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-17drm/amdgpu: Enable mode-1 reset for RAS recovery in fatal error modeYiPeng Chai
The patch is enabling mode-1 reset for RAS recovery in fatal error mode. Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Tao Zhou <tao.zhou1@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-17drm/amdgpu: Add support for RAS table at 0x40000Luben Tuikov
Add support for RAS table at I2C EEPROM address of 0x40000, since on some ASICs it is not at 0, but at 0x40000. Cc: Alex Deucher <Alexander.Deucher@amd.com> Cc: Kent Russell <kent.russell@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Tested-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-17drm/amdgpu: Interpret IPMI data for product information (v2)Luben Tuikov
Don't assume FRU MCU memory locations for the FRU data fields, or their sizes, instead read and interpret the IPMI data, as stipulated in the IPMI spec version 1.0 rev 1.2. Extract the Product Name, Product Part/Model Number, and the Product Serial Number by interpreting the IPMI data. Check the checksums of the stored IPMI data to make sure we don't read and give corrupted data back the the user. Eliminate small I2C reads, and instead read the whole Product Info Area in one go, and then extract the information we're seeking from it. Eliminates a whole function, making this file smaller. v2: Clarify changes in the commit message. Cc: Alex Deucher <Alexander.Deucher@amd.com> Cc: Kent Russell <kent.russell@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Tested-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-17drm/amdgpu: Bug-fix: Reading I2C FRU data on newer ASICsLuben Tuikov
Set the new correct default FRU MCU I2C address for newer ASICs, so that we can correctly read the Product Name, Product Part/Model Number and Serial Number. On newer ASICs, the FRU MCU was moved to I2C address 0x58. Cc: Alex Deucher <Alexander.Deucher@amd.com> Cc: Kent Russell <kent.russell@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Tested-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-17drm/amdgpu: Allow non-standard EEPROM I2C addressLuben Tuikov
Allow non-standard EEPROM I2C address of 0x58, where the Device Type Identifier is 1011b, where we form 1011000b = 0x58 I2C address, as on some ASICs the FRU data lives there. Cc: Alex Deucher <Alexander.Deucher@amd.com> Cc: Kent Russell <kent.russell@amd.com> Signed-off-by: Luben Tuikov <luben.tuikov@amd.com> Tested-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Kent Russell <kent.russell@amd.com> Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-11-17drm/i915/audio: Realign some function argumentsVille Syrjälä
Fix up some function argument alignment fails. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221108151839.31567-5-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-11-17drm/i915/audio: Unify get_saved_enc()Ville Syrjälä
Make the two branches of get_saved_enc() look alike. Currently they look different even though they do exactly the same thing apart from == vs. != for the MST comparison. Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221108151839.31567-4-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-11-17drm/i915: Treat HDMI as DVI when cloningVille Syrjälä
When doing HDMI+non-HDMI cloning the other sink can't get the infoframes/etc. so stuff like limited range output is not a good idea. Similarly when doing HDMI+HDMI cloning on g4x (only platform where we allow it) only one of the ports can receive infoframes and so again using any fancy stuff is a bad idea. We also don't track the inforames/audio state per-port so we'd end up with some kind of random mismash state when multipled encoders try to compute the same stuff. And the hardware will in fact automagically disable audio/infoframe transmission if you try to enable it for multiple HDMI ports at the same time. Thus disable all HDMI specific features when cloning. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221107194604.15227-4-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
2022-11-17drm/i915: Force RGB output for DVI sinkVille Syrjälä
YCbCr output requires infoframes and whatnot, so don't allow it when dealing with a DVI sink (or a HDMI sink we wish to treat as DVI). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221107194604.15227-3-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 10:17:17 +0000