| Age | Commit message (Collapse) | Author |
|---|
|
The err_mem label's name is unclear. It actually should be reached on
any error after stmmac_probe_config_dt() succeeds. Name it after the
cleanup action that needs to be called before exiting.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We can use a devm action to completely drop the remove callback and use
stmmac_pltfr_remove() directly for remove. We can also drop one of the
goto labels.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The new efx_bind_neigh() function contains a broken code path when IPV6 is
disabled:
drivers/net/ethernet/sfc/tc_encap_actions.c:144:7: error: variable 'n' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (encap->type & EFX_ENCAP_FLAG_IPV6) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/sfc/tc_encap_actions.c:184:8: note: uninitialized use occurs here
if (!n) {
^
drivers/net/ethernet/sfc/tc_encap_actions.c:144:3: note: remove the 'if' if its condition is always false
if (encap->type & EFX_ENCAP_FLAG_IPV6) {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/sfc/tc_encap_actions.c:141:22: note: initialize the variable 'n' to silence this warning
struct neighbour *n;
^
= NULL
Change it to use the existing error handling path here.
Fixes: 7e5e7d800011a ("sfc: neighbour lookup for TC encap action offload")
Suggested-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20230619091215.2731541-2-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The driver now fails to link when CONFIG_INET is disabled, so
add an explicit Kconfig dependency:
ld.lld: error: undefined symbol: ip_route_output_flow
>>> referenced by tc_encap_actions.c
>>> drivers/net/ethernet/sfc/tc_encap_actions.o:(efx_tc_flower_create_encap_md) in archive vmlinux.a
ld.lld: error: undefined symbol: ip_send_check
>>> referenced by tc_encap_actions.c
>>> drivers/net/ethernet/sfc/tc_encap_actions.o:(efx_gen_encap_header) in archive vmlinux.a
>>> referenced by tc_encap_actions.c
>>> drivers/net/ethernet/sfc/tc_encap_actions.o:(efx_gen_encap_header) in archive vmlinux.a
ld.lld: error: undefined symbol: arp_tbl
>>> referenced by tc_encap_actions.c
>>> drivers/net/ethernet/sfc/tc_encap_actions.o:(efx_tc_netevent_event) in archive vmlinux.a
>>> referenced by tc_encap_actions.c
>>> drivers/net/ethernet/sfc/tc_encap_actions.o:(efx_tc_netevent_event) in archive vmlinux.a
Fixes: a1e82162af0b8 ("sfc: generate encap headers for TC offload")
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202306151656.yttECVTP-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230619091215.2731541-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The text has been cut/paste from genphy_c45_ethtool_get_eee but not
changed to reflect it performs set.
Additionally, extend the comment. This function implements the logic
that eee_enabled has global control over EEE. When eee_enabled is
false, no link modes will be advertised, and as a result, the MAC
should not transmit LPI.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230619220332.4038924-1-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit da9ef50f545f86ffe6ff786174d26500c4db737a.
This fixes a regression in which the link would come up, but no
communication was possible.
The reverted commit was also removing a comment about
DP83867_PHYCR_FORCE_LINK_GOOD, this is not added back in this commits
since it seems that this is unrelated to the original code change.
Closes: https://lore.kernel.org/all/ZGuDJos8D7N0J6Z2@francesco-nb.int.toradex.com/
Fixes: da9ef50f545f ("net: phy: dp83867: perform soft reset and retain established link")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Praneeth Bajjuri <praneeth@ti.com>
Link: https://lore.kernel.org/r/20230619154435.355485-1-francesco@dolcini.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Blamed commit added these helpers for sake of detecting RAW
sockets specific ioctl.
syzbot complained about it [1].
Issue here is that RAW sockets could pretend there was no need
to call ipmr_sk_ioctl()
Regardless of inet_sk(sk)->inet_num, we must be prepared
for ipmr_ioctl() being called later. This must happen
from ipmr_sk_ioctl() context only.
We could add a safety check in ipmr_ioctl() at the risk of breaking
applications.
Instead, remove sk_is_ipmr() and sk_is_icmpv6() because their
name would be misleading, once we change their implementation.
[1]
BUG: KASAN: stack-out-of-bounds in ipmr_ioctl+0xb12/0xbd0 net/ipv4/ipmr.c:1654
Read of size 4 at addr ffffc90003aefae4 by task syz-executor105/5004
CPU: 0 PID: 5004 Comm: syz-executor105 Not tainted 6.4.0-rc6-syzkaller-01304-gc08afcdcf952 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106
print_address_description.constprop.0+0x2c/0x3c0 mm/kasan/report.c:351
print_report mm/kasan/report.c:462 [inline]
kasan_report+0x11c/0x130 mm/kasan/report.c:572
ipmr_ioctl+0xb12/0xbd0 net/ipv4/ipmr.c:1654
raw_ioctl+0x4e/0x1e0 net/ipv4/raw.c:881
sock_ioctl_out net/core/sock.c:4186 [inline]
sk_ioctl+0x151/0x440 net/core/sock.c:4214
inet_ioctl+0x18c/0x380 net/ipv4/af_inet.c:1001
sock_do_ioctl+0xcc/0x230 net/socket.c:1189
sock_ioctl+0x1f8/0x680 net/socket.c:1306
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x197/0x210 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f2944bf6ad9
Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffd8897a028 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f2944bf6ad9
RDX: 0000000000000000 RSI: 00000000000089e1 RDI: 0000000000000003
RBP: 00007f2944bbac80 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f2944bbad10
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
The buggy address belongs to stack of task syz-executor105/5004
and is located at offset 36 in frame:
sk_ioctl+0x0/0x440 net/core/sock.c:4172
This frame has 2 objects:
[32, 36) 'karg'
[48, 88) 'buffer'
Fixes: e1d001fa5b47 ("net: ioctl: Use kernel memory on protocol ioctl callbacks")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20230619124336.651528-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
PHY address and device address are passed in the wrong order.
Cc: stable@vger.kernel.org
Fixes: 4e4aafcddbbf ("net: mdio: Add dedicated C45 API to MDIO bus drivers")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20230619094948.84452-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
SIOCGETSGCNT_IN6 uses a "struct sioc_sg_req6 buffer".
Unfortunately the blamed commit made hard to ensure type safety.
syzbot reported:
BUG: KASAN: stack-out-of-bounds in ip6mr_ioctl+0xba3/0xcb0 net/ipv6/ip6mr.c:1917
Read of size 16 at addr ffffc900039afb68 by task syz-executor937/5008
CPU: 1 PID: 5008 Comm: syz-executor937 Not tainted 6.4.0-rc6-syzkaller-01304-gc08afcdcf952 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106
print_address_description.constprop.0+0x2c/0x3c0 mm/kasan/report.c:351
print_report mm/kasan/report.c:462 [inline]
kasan_report+0x11c/0x130 mm/kasan/report.c:572
ip6mr_ioctl+0xba3/0xcb0 net/ipv6/ip6mr.c:1917
rawv6_ioctl+0x4e/0x1e0 net/ipv6/raw.c:1143
sock_ioctl_out net/core/sock.c:4186 [inline]
sk_ioctl+0x151/0x440 net/core/sock.c:4214
inet6_ioctl+0x1b8/0x290 net/ipv6/af_inet6.c:582
sock_do_ioctl+0xcc/0x230 net/socket.c:1189
sock_ioctl+0x1f8/0x680 net/socket.c:1306
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:870 [inline]
__se_sys_ioctl fs/ioctl.c:856 [inline]
__x64_sys_ioctl+0x197/0x210 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f255849bad9
Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffd06792778 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f255849bad9
RDX: 0000000000000000 RSI: 00000000000089e1 RDI: 0000000000000003
RBP: 00007f255845fc80 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f255845fd10
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
The buggy address belongs to stack of task syz-executor937/5008
and is located at offset 40 in frame:
sk_ioctl+0x0/0x440 net/core/sock.c:4172
This frame has 2 objects:
[32, 36) 'karg'
[48, 88) 'buffer'
Fixes: e1d001fa5b47 ("net: ioctl: Use kernel memory on protocol ioctl callbacks")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: David Ahern <dsahern@kernel.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20230619072740.464528-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
TC rule support to offload rx queue mapping rules.
Eg:
tc filter add dev eth2 ingress protocol ip flower \
dst_ip 192.168.8.100 \
action skbedit queue_mapping 4 skip_sw
action mirred ingress redirect dev eth5
Packets destined to 192.168.8.100 will be forwarded to rx
queue 4 of eth5 interface.
tc filter add dev eth2 ingress protocol ip flower \
dst_ip 192.168.8.100 \
action skbedit queue_mapping 9 skip_sw
Packets destined to 192.168.8.100 will be forwarded to rx
queue 4 of eth2 interface.
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Link: https://lore.kernel.org/r/20230619060638.1032304-1-rkannoth@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Group some variables based on their sizes to reduce hole and avoid padding.
On x86_64, this shrinks the size of 'struct netlbl_domaddr6_map'
from 72 to 64 bytes.
It saves a few bytes of memory and is more cache-line friendly.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/aa109847260e51e174c823b6d1441f75be370f01.1687083361.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Group some variables based on their sizes to reduce hole and avoid padding.
On x86_64, this shrinks the size of 'struct mptcp_pm_add_entry'
from 136 to 128 bytes.
It saves a few bytes of memory and is more cache-line friendly.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/e47b71de54fd3e580544be56fc1bb2985c77b0f4.1687081558.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Group some variables based on their sizes to reduce hole and avoid padding.
On x86_64, this shrinks the size of 'struct mctp_route'
from 72 to 64 bytes.
It saves a few bytes of memory and is more cache-line friendly.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/393ad1a5aef0aa28d839eeb3d7477da0e0eeb0b0.1687080803.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"19 hotfixes. 8 of these are cc:stable.
This includes a wholesale reversion of the post-6.4 series 'make slab
shrink lockless'. After input from Dave Chinner it has been decided
that we should go a different way [1]"
Link: https://lkml.kernel.org/r/ZH6K0McWBeCjaf16@dread.disaster.area [1]
* tag 'mm-hotfixes-stable-2023-06-20-12-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
selftests/mm: fix cross compilation with LLVM
mailmap: add entries for Ben Dooks
nilfs2: prevent general protection fault in nilfs_clear_dirty_page()
Revert "mm: vmscan: make global slab shrink lockless"
Revert "mm: vmscan: make memcg slab shrink lockless"
Revert "mm: vmscan: add shrinker_srcu_generation"
Revert "mm: shrinkers: make count and scan in shrinker debugfs lockless"
Revert "mm: vmscan: hold write lock to reparent shrinker nr_deferred"
Revert "mm: vmscan: remove shrinker_rwsem from synchronize_shrinkers()"
Revert "mm: shrinkers: convert shrinker_rwsem to mutex"
nilfs2: fix buffer corruption due to concurrent device reads
scripts/gdb: fix SB_* constants parsing
scripts: fix the gfp flags header path in gfp-translate
udmabuf: revert 'Add support for mapping hugepages (v4)'
mm/khugepaged: fix iteration in collapse_file
memfd: check for non-NULL file_seals in memfd_create() syscall
mm/vmalloc: do not output a spurious warning when huge vmalloc() fails
mm/mprotect: fix do_mprotect_pkey() limit check
writeback: fix dereferencing NULL mapping->host on writeback_page_template
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix a kernel crash during early resume from ACPI S3 that has been
present since the 5.15 cycle when might_sleep() was added to
down_timeout(), which in some configurations of the kernel caused an
implicit preemption point to trigger at a wrong time"
* tag 'acpi-6.4-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: sleep: Avoid breaking S3 wakeup due to might_sleep()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"Fix a regression introduced during the 6.3 cycle causing
intel_soc_dts_iosf to report incorrect temperature values
due to a coding mistake (Hans de Goede)"
* tag 'thermal-6.4-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/intel/intel_soc_dts_iosf: Fix reporting wrong temperatures
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix MAINTAINERS file to point to proper mailing list for rtla and rv
The mailing list pointed to linux-trace-devel instead of
linux-trace-kernel. The former is for the tracing libraries and the
latter is for anything in the Linux kernel tree. The wrong mailing
list was used because linux-trace-kernel did not exist when rtla and
rv were created.
- User events:
- Fix matching of dynamic events to their user events
When user writes to dynamic_events file, a lookup of the
registered dynamic events is made, but there were some cases that
a match could be incorrectly made.
- Add auto cleanup of user events
Have the user events automatically get removed when the last
reference (file descriptor) is closed. This was asked for to
prevent leaks of user events hanging around needing admins to
clean them up.
- Add persistent logic (but not let user space use it yet)
In some cases, having a persistent user event (one that does not
get cleaned up automatically) is useful. But there's still debates
about how to expose this to user space. The infrastructure is
added, but the API is not.
- Update the selftests
Update the user event selftests to reflect the above changes"
* tag 'trace-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/user_events: Document auto-cleanup and remove dyn_event refs
selftests/user_events: Adapt dyn_test to non-persist events
selftests/user_events: Ensure auto cleanup works as expected
tracing/user_events: Add auto cleanup and future persist flag
tracing/user_events: Track refcount consistently via put/get
tracing/user_events: Store register flags on events
tracing/user_events: Remove user_ns walk for groups
selftests/user_events: Add perf self-test for empty arguments events
selftests/user_events: Clear the events after perf self-test
selftests/user_events: Add ftrace self-test for empty arguments events
tracing/user_events: Fix the incorrect trace record for empty arguments events
tracing: Modify print_fields() for fields output order
tracing/user_events: Handle matching arguments that is null from dyn_events
tracing/user_events: Prevent same name but different args event
tracing/rv/rtla: Update MAINTAINERS file to point to proper mailing list
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"One more regression fix for an assertion failure that uncovered a
nasty problem with stripe calculations. This is caused by a u32
overflow when there are enough devices. The fstests require 6 so this
hasn't been caught, I was able to hit it with 8.
The fix is minimal and only adds u64 casts, we'll clean that up later.
I did various additional tests to be sure"
* tag 'for-6.4-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix u32 overflows when left shifting stripe_nr
|
|
When deleting a base chain, iptables-nft simply submits the whole chain
to the kernel, including the NFTA_CHAIN_HOOK attribute. The new code
added by fixed commit then turned this into a chain update, destroying
the hook but not the chain itself. Detect the situation by checking if
the chain type is either netdev or inet/ingress.
Fixes: 7d937b107108f ("netfilter: nf_tables: support for deleting devices in an existing netdev chain")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Move the alias from xt_osf to nfnetlink_osf.
Fixes: f9324952088f ("netfilter: nfnetlink_osf: extract nfnetlink_subsystem code from xt_osf.c")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Otherwise the module reference counter is leaked.
Fixes b9703ed44ffb ("netfilter: nf_tables: support for adding new devices to an existing netdev chain")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Never used from userspace, disallow these parameters.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Disallow updates of set timeout and garbage collection parameters for
anonymous sets.
Fixes: 123b99619cca ("netfilter: nf_tables: honor set timeout and garbage collection updates")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Use binding list to track set transaction and to check for unbound
chains before entering the commit phase.
Bail out if chain binding remain unused before entering the commit
step.
Fixes: d0e2c7de92c7 ("netfilter: nf_tables: add NFT_CHAIN_BINDING")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add a new list to track set transaction and to check for unbound
anonymous sets before entering the commit phase.
Bail out at the end of the transaction handling if an anonymous set
remains unbound.
Fixes: 96518518cc41 ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Anonymous sets come with NFT_SET_CONSTANT from userspace. Although API
allows to create anonymous sets without NFT_SET_CONSTANT, it makes no
sense to allow to add and to delete elements for bound anonymous sets.
Fixes: 96518518cc41 ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Since ("netfilter: nf_tables: drop map element references from
preparation phase"), integration with commit protocol is better,
therefore drop the workaround that b91d90368837 ("netfilter: nf_tables:
fix leaking object reference count") provides.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The .walk callback iterates over the current active set, but it might be
useful to iterate over the next generation set. Use the generation mask
to determine what set view (either current or next generation) is use
for the walk iteration.
Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
set .destroy callback releases the references to other objects in maps.
This is very late and it results in spurious EBUSY errors. Drop refcount
from the preparation phase instead, update set backend not to drop
reference counter from set .destroy path.
Exceptions: NFT_TRANS_PREPARE_ERROR does not require to drop the
reference counter because the transaction abort path releases the map
references for each element since the set is unbound. The abort path
also deals with releasing reference counter for new elements added to
unbound sets.
Fixes: 591054469b3e ("netfilter: nf_tables: revisit chain/object refcounting from elements")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add a new state to deal with rule expressions deactivation from the
newrule error path, otherwise the anonymous set remains in the list in
inactive state for the next generation. Mark the set/chain transaction
as unbound so the abort path releases this object, set it as inactive in
the next generation so it is not reachable anymore from this transaction
and reference counter is dropped.
Fixes: 1240eb93f061 ("netfilter: nf_tables: incorrect error path handling with NFT_MSG_NEWRULE")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add bound flag to rule and chain transactions as in 6a0a8d10a366
("netfilter: nf_tables: use-after-free in failing rule with bound set")
to skip them in case that the chain is already bound from the abort
path.
This patch fixes an imbalance in the chain use refcnt that triggers a
WARN_ON on the table and chain destroy path.
This patch also disallows nested chain bindings, which is not
supported from userspace.
The logic to deal with chain binding in nft_data_hold() and
nft_data_release() is not correct. The NFT_TRANS_PREPARE state needs a
special handling in case a chain is bound but next expressions in the
same rule fail to initialize as described by 1240eb93f061 ("netfilter:
nf_tables: incorrect error path handling with NFT_MSG_NEWRULE").
The chain is left bound if rule construction fails, so the objects
stored in this chain (and the chain itself) are released by the
transaction records from the abort path, follow up patch ("netfilter:
nf_tables: add NFT_TRANS_PREPARE_ERROR to deal with bound set/chain")
completes this error handling.
When deleting an existing rule, chain bound flag is set off so the
rule expression .destroy path releases the objects.
Fixes: d0e2c7de92c7 ("netfilter: nf_tables: add NFT_CHAIN_BINDING")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The max_raw_write member of the regmap_spi_avmm_bus structure is defined
as:
.max_raw_write = SPI_AVMM_VAL_SIZE * MAX_WRITE_CNT
SPI_AVMM_VAL_SIZE == 4 and MAX_WRITE_CNT == 1 so this results in a
maximum write transfer size of 4 bytes which provides only enough space to
transfer the address of the target register. It provides no space for the
value to be transferred. This bug became an issue (divide-by-zero in
_regmap_raw_write()) after the following was accepted into mainline:
commit 3981514180c9 ("regmap: Account for register length when chunking")
Change max_raw_write to include space (4 additional bytes) for both the
register address and value:
.max_raw_write = SPI_AVMM_REG_SIZE + SPI_AVMM_VAL_SIZE * MAX_WRITE_CNT
Fixes: 7f9fb67358a2 ("regmap: add Intel SPI Slave to AVMM Bus Bridge support")
Reviewed-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Link: https://lore.kernel.org/r/20230620202824.380313-1-russell.h.weight@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for AX1690i and AX1690s devices with
PCIE id 0x7AF0.
Cc: stable@vger.kernel.org # 6.1+
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20230619150233.461290-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We have seen a bug where the NIC incorrectly changes the length in the
IP header of a padded packet to include the padding bytes. The driver
already has a workaround for this so do the workaround for this NIC too.
This resolves the issue.
The NIC in question identifies itself as follows:
[ 8.828494] be2net 0000:02:00.0: FW version is 10.7.110.31
[ 8.834759] be2net 0000:02:00.0: Emulex OneConnect(be3): PF FLEX10 port 1
02:00.0 Ethernet controller: Emulex Corporation OneConnect 10Gb NIC (be3) (rev 01)
Fixes: ca34fe38f06d ("be2net: fix wrong usage of adapter->generation")
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Link: https://lore.kernel.org/r/20230616164549.2863037-1-ross.lagerwall@citrix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 6970ef27ff7f ("net: fec: add xdp and page pool statistics") selected
CONFIG_PAGE_POOL_STATS from the FEC driver symbol, making it impossible
to build without the page pool statistics when this driver is enabled. The
help text of those statistics mentions increased overhead. Allow the user
to choose between usefulness of the statistics and the added overhead.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20230616191832.2944130-1-l.stach@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If an AF_ALG socket bound to a hashing algorithm is sent a zero-length
message with MSG_MORE set and then recvmsg() is called without first
sending another message without MSG_MORE set to end the operation, an oops
will occur because the crypto context and result doesn't now get set up in
advance because hash_sendmsg() now defers that as long as possible in the
hope that it can use crypto_ahash_digest() - and then because the message
is zero-length, it the data wrangling loop is skipped.
Fix this by handling zero-length sends at the top of the hash_sendmsg()
function. If we're not continuing the previous sendmsg(), then just ignore
the send (hash_recvmsg() will invent something when called); if we are
continuing, then we finalise the request at this point if MSG_MORE is not
set to get any error here, otherwise the send is of no effect and can be
ignored.
Whilst we're at it, remove the code to create a kvmalloc'd scatterlist if
we get more than ALG_MAX_PAGES - this shouldn't happen.
Fixes: c662b043cdca ("crypto: af_alg/hash: Support MSG_SPLICE_PAGES")
Reported-by: syzbot+13a08c0bf4d212766c3c@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/000000000000b928f705fdeb873a@google.com/
Reported-by: syzbot+14234ccf6d0ef629ec1a@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/000000000000c047db05fdeb8790@google.com/
Reported-by: syzbot+4e2e47f32607d0f72d43@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/000000000000bcca3205fdeb87fb@google.com/
Reported-by: syzbot+472626bb5e7c59fb768f@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/000000000000b55d8805fdeb8385@google.com/
Signed-off-by: David Howells <dhowells@redhat.com>
Reported-and-tested-by: syzbot+6efc50cc1f8d718d6cb7@syzkaller.appspotmail.com
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://lore.kernel.org/r/427646.1686913832@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The new phy driver attempts to select a driver from another subsystem,
but that fails when the NVMEM subsystem is disabled:
WARNING: unmet direct dependencies detected for NVMEM_MTK_EFUSE
Depends on [n]: NVMEM [=n] && (ARCH_MEDIATEK [=n] || COMPILE_TEST [=y]) && HAS_IOMEM [=y]
Selected by [y]:
- MEDIATEK_GE_SOC_PHY [=y] && NETDEVICES [=y] && PHYLIB [=y] && (ARM64 && ARCH_MEDIATEK [=n] || COMPILE_TEST [=y])
I could not see an actual compile time dependency, so presumably this
is only needed for for working correctly but not technically a dependency
on that particular nvmem driver implementation, so it would likely
be safe to remove the select for compile testing.
To keep the spirit of the original 'select', just replace this with a
'depends on' that ensures that the driver will work but does not get in
the way of build testing.
Fixes: 98c485eaf509b ("net: phy: add driver for MediaTek SoC built-in GE PHYs")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Link: https://lore.kernel.org/r/20230616093009.3511692-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull smb server fixes from Steve French:
"Four smb3 server fixes, all also for stable:
- fix potential oops in parsing compounded requests
- fix various paths (mkdir, create etc) where mnt_want_write was not
checked first
- fix slab out of bounds in check_message and write"
* tag '6.4-rc6-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: validate session id and tree id in the compound request
ksmbd: fix out-of-bound read in smb2_write
ksmbd: add mnt_want_write to ksmbd vfs functions
ksmbd: validate command payload size
|
|
[BUG]
David reported an ASSERT() get triggered during fio load on 8 devices
with data/raid6 and metadata/raid1c3:
fio --rw=randrw --randrepeat=1 --size=3000m \
--bsrange=512b-64k --bs_unaligned \
--ioengine=libaio --fsync=1024 \
--name=job0 --name=job1 \
The ASSERT() is from rbio_add_bio() of raid56.c:
ASSERT(orig_logical >= full_stripe_start &&
orig_logical + orig_len <= full_stripe_start +
rbio->nr_data * BTRFS_STRIPE_LEN);
Which is checking if the target rbio is crossing the full stripe
boundary.
[100.789] assertion failed: orig_logical >= full_stripe_start && orig_logical + orig_len <= full_stripe_start + rbio->nr_data * BTRFS_STRIPE_LEN, in fs/btrfs/raid56.c:1622
[100.795] ------------[ cut here ]------------
[100.796] kernel BUG at fs/btrfs/raid56.c:1622!
[100.797] invalid opcode: 0000 [#1] PREEMPT SMP KASAN
[100.798] CPU: 1 PID: 100 Comm: kworker/u8:4 Not tainted 6.4.0-rc6-default+ #124
[100.799] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552-rebuilt.opensuse.org 04/01/2014
[100.802] Workqueue: writeback wb_workfn (flush-btrfs-1)
[100.803] RIP: 0010:rbio_add_bio+0x204/0x210 [btrfs]
[100.806] RSP: 0018:ffff888104a8f300 EFLAGS: 00010246
[100.808] RAX: 00000000000000a1 RBX: ffff8881075907e0 RCX: ffffed1020951e01
[100.809] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 0000000000000001
[100.811] RBP: 0000000141d20000 R08: 0000000000000001 R09: ffff888104a8f04f
[100.813] R10: ffffed1020951e09 R11: 0000000000000003 R12: ffff88810e87f400
[100.815] R13: 0000000041d20000 R14: 0000000144529000 R15: ffff888101524000
[100.817] FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000
[100.821] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[100.822] CR2: 000055d54e44c270 CR3: 000000010a9a1006 CR4: 00000000003706a0
[100.824] Call Trace:
[100.825] <TASK>
[100.825] ? die+0x32/0x80
[100.826] ? do_trap+0x12d/0x160
[100.827] ? rbio_add_bio+0x204/0x210 [btrfs]
[100.827] ? rbio_add_bio+0x204/0x210 [btrfs]
[100.829] ? do_error_trap+0x90/0x130
[100.830] ? rbio_add_bio+0x204/0x210 [btrfs]
[100.831] ? handle_invalid_op+0x2c/0x30
[100.833] ? rbio_add_bio+0x204/0x210 [btrfs]
[100.835] ? exc_invalid_op+0x29/0x40
[100.836] ? asm_exc_invalid_op+0x16/0x20
[100.837] ? rbio_add_bio+0x204/0x210 [btrfs]
[100.837] raid56_parity_write+0x64/0x270 [btrfs]
[100.838] btrfs_submit_chunk+0x26e/0x800 [btrfs]
[100.840] ? btrfs_bio_init+0x80/0x80 [btrfs]
[100.841] ? release_pages+0x503/0x6d0
[100.842] ? folio_unlock+0x2f/0x60
[100.844] ? __folio_put+0x60/0x60
[100.845] ? btrfs_do_readpage+0xae0/0xae0 [btrfs]
[100.847] btrfs_submit_bio+0x21/0x60 [btrfs]
[100.847] submit_one_bio+0x6a/0xb0 [btrfs]
[100.849] extent_write_cache_pages+0x395/0x680 [btrfs]
[100.850] ? __extent_writepage+0x520/0x520 [btrfs]
[100.851] ? mark_usage+0x190/0x190
[100.852] extent_writepages+0xdb/0x130 [btrfs]
[100.853] ? extent_write_locked_range+0x480/0x480 [btrfs]
[100.854] ? mark_usage+0x190/0x190
[100.854] ? attach_extent_buffer_page+0x220/0x220 [btrfs]
[100.855] ? reacquire_held_locks+0x178/0x280
[100.856] ? writeback_sb_inodes+0x245/0x7f0
[100.857] do_writepages+0x102/0x2e0
[100.858] ? page_writeback_cpu_online+0x10/0x10
[100.859] ? __lock_release.isra.0+0x14a/0x4d0
[100.860] ? reacquire_held_locks+0x280/0x280
[100.861] ? __lock_acquired+0x1e9/0x3d0
[100.862] ? do_raw_spin_lock+0x1b0/0x1b0
[100.863] __writeback_single_inode+0x94/0x450
[100.864] writeback_sb_inodes+0x372/0x7f0
[100.864] ? lock_sync+0xd0/0xd0
[100.865] ? do_raw_spin_unlock+0x93/0xf0
[100.866] ? sync_inode_metadata+0xc0/0xc0
[100.867] ? rwsem_optimistic_spin+0x340/0x340
[100.868] __writeback_inodes_wb+0x70/0x130
[100.869] wb_writeback+0x2d1/0x530
[100.869] ? __writeback_inodes_wb+0x130/0x130
[100.870] ? lockdep_hardirqs_on_prepare.part.0+0xf1/0x1c0
[100.870] wb_do_writeback+0x3eb/0x480
[100.871] ? wb_writeback+0x530/0x530
[100.871] ? mark_lock_irq+0xcd0/0xcd0
[100.872] wb_workfn+0xe0/0x3f0<
[CAUSE]
Commit a97699d1d610 ("btrfs: replace map_lookup->stripe_len by
BTRFS_STRIPE_LEN") changes how we calculate the map length, to reduce
u64 division.
Function btrfs_max_io_len() is to get the length to the stripe boundary.
It calculates the full stripe start offset (inside the chunk) by the
following code:
*full_stripe_start =
rounddown(*stripe_nr, nr_data_stripes(map)) <<
BTRFS_STRIPE_LEN_SHIFT;
The calculation itself is fine, but the value returned by rounddown() is
dependent on both @stripe_nr (which is u32) and nr_data_stripes() (which
returned int).
Thus the result is also u32, then we do the left shift, which can
overflow u32.
If such overflow happens, @full_stripe_start will be a value way smaller
than @offset, causing later "full_stripe_len - (offset -
*full_stripe_start)" to underflow, thus make later length calculation to
have no stripe boundary limit, resulting a write bio to exceed stripe
boundary.
There are some other locations like this, with a u32 @stripe_nr got left
shift, which can lead to a similar overflow.
[FIX]
Fix all @stripe_nr with left shift with a type cast to u64 before the
left shift.
Those involved @stripe_nr or similar variables are recording the stripe
number inside the chunk, which is small enough to be contained by u32,
but their offset inside the chunk can not fit into u32.
Thus for those specific left shifts, a type cast to u64 is necessary so
this patch does not touch them and the code will be cleaned up in the
future to keep the fix minimal.
Reported-by: David Sterba <dsterba@suse.com>
Fixes: a97699d1d610 ("btrfs: replace map_lookup->stripe_len by BTRFS_STRIPE_LEN")
Tested-by: David Sterba <dsterba@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
ipsec-2023-06-20
|
|
Arınç ÜNAL says:
====================
net: dsa: mt7530: fix multiple CPU ports, BPDU and LLDP handling
This patch series fixes all non-theoretical issues regarding multiple CPU
ports and the handling of LLDP frames and BPDUs.
I am adding me as a maintainer, I've got some code improvements on the way.
I will keep an eye on this driver and the patches submitted for it in the
future.
Arınç
v6:
- Change a small portion of the comment in the diff on "net: dsa: mt7530:
set all CPU ports in MT7531_CPU_PMAP" with Russell's suggestion.
- Change the patch log of "net: dsa: mt7530: fix trapping frames on
non-MT7621 SoC MT7530 switch" with Vladimir's suggestion.
- Group the code for trapping frames into a common function and call that.
- Add Vladimir and Russell's reviewed-by tags to where they're given.
v5:
- Change the comment in the diff on the first patch with Russell's words.
- Change the patch log of the first patch to state that the patch is just
preparatory work for change "net: dsa: introduce
preferred_default_local_cpu_port and use on MT7530" and not a fix to an
existing problem on the code base.
- Remove the "net: dsa: mt7530: fix trapping frames with multiple CPU ports
on MT7530" patch. It fixes a theoretical issue, therefore it is net-next
material.
- Remove unnecessary information from the patch logs. Remove the enum
renaming change.
- Strengthen the point of the "net: dsa: introduce
preferred_default_local_cpu_port and use on MT7530" patch.
v4: Make the patch logs and my comments in the code easier to understand.
v3: Fix the from header on the patches. Write a cover letter.
v2: Add patches to fix the handling of LLDP frames and BPDUs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add me as a maintainer of the MediaTek MT7530 DSA subdriver.
List maintainers in alphabetical order by first name.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since the introduction of the OF bindings, DSA has always had a policy that
in case multiple CPU ports are present in the device tree, the numerically
smallest one is always chosen.
The MT7530 switch family, except the switch on the MT7988 SoC, has 2 CPU
ports, 5 and 6, where port 6 is preferable on the MT7531BE switch because
it has higher bandwidth.
The MT7530 driver developers had 3 options:
- to modify DSA when the MT7531 switch support was introduced, such as to
prefer the better port
- to declare both CPU ports in device trees as CPU ports, and live with the
sub-optimal performance resulting from not preferring the better port
- to declare just port 6 in the device tree as a CPU port
Of course they chose the path of least resistance (3rd option), kicking the
can down the road. The hardware description in the device tree is supposed
to be stable - developers are not supposed to adopt the strategy of
piecemeal hardware description, where the device tree is updated in
lockstep with the features that the kernel currently supports.
Now, as a result of the fact that they did that, any attempts to modify the
device tree and describe both CPU ports as CPU ports would make DSA change
its default selection from port 6 to 5, effectively resulting in a
performance degradation visible to users with the MT7531BE switch as can be
seen below.
Without preferring port 6:
[ ID][Role] Interval Transfer Bitrate Retr
[ 5][TX-C] 0.00-20.00 sec 374 MBytes 157 Mbits/sec 734 sender
[ 5][TX-C] 0.00-20.00 sec 373 MBytes 156 Mbits/sec receiver
[ 7][RX-C] 0.00-20.00 sec 1.81 GBytes 778 Mbits/sec 0 sender
[ 7][RX-C] 0.00-20.00 sec 1.81 GBytes 777 Mbits/sec receiver
With preferring port 6:
[ ID][Role] Interval Transfer Bitrate Retr
[ 5][TX-C] 0.00-20.00 sec 1.99 GBytes 856 Mbits/sec 273 sender
[ 5][TX-C] 0.00-20.00 sec 1.99 GBytes 855 Mbits/sec receiver
[ 7][RX-C] 0.00-20.00 sec 1.72 GBytes 737 Mbits/sec 15 sender
[ 7][RX-C] 0.00-20.00 sec 1.71 GBytes 736 Mbits/sec receiver
Using one port for WAN and the other ports for LAN is a very popular use
case which is what this test emulates.
As such, this change proposes that we retroactively modify stable kernels
(which don't support the modification of the CPU port assignments, so as to
let user space fix the problem and restore the throughput) to keep the
mt7530 driver preferring port 6 even with device trees where the hardware
is more fully described.
Fixes: c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
LLDP frames are link-local frames, therefore they must be trapped to the
CPU port. Currently, the MT753X switches treat LLDP frames as regular
multicast frames, therefore flooding them to user ports. To fix this, set
LLDP frames to be trapped to the CPU port(s).
Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
BPDUs are link-local frames, therefore they must be trapped to the CPU
port. Currently, the MT7530 switch treats BPDUs as regular multicast
frames, therefore flooding them to user ports. To fix this, set BPDUs to be
trapped to the CPU port. Group this on mt7530_setup() and
mt7531_setup_common() into mt753x_trap_frames() and call that.
Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All MT7530 switch IP variants share the MT7530_MFC register, but the
current driver only writes it for the switch variant that is integrated in
the MT7621 SoC. Modify the code to include all MT7530 derivatives.
Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
MT7531_CPU_PMAP represents the destination port mask for trapped-to-CPU
frames (further restricted by PCR_MATRIX).
Currently the driver sets the first CPU port as the single port in this bit
mask, which works fine regardless of whether the device tree defines port
5, 6 or 5+6 as CPU ports. This is because the logic coincides with DSA's
logic of picking the first CPU port as the CPU port that all user ports are
affine to, by default.
An upcoming change would like to influence DSA's selection of the default
CPU port to no longer be the first one, and in that case, this logic needs
adaptation.
Since there is no observed leakage or duplication of frames if all CPU
ports are defined in this bit mask, simply include them all.
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Layerscape MACs support 25Gbps network speed with dpmac "CAUI" mode.
Add the mappings between DPMAC_ETH_IF_* and HY_INTERFACE_MODE_*, as well
as the 25000 mac capability.
Tested on SolidRun LX2162a Clearfog, serdes 1 protocol 18.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan
Stefan Schmidt says:
====================
An update from ieee802154 for your *net* tree:
Two small fixes and MAINTAINERS update this time.
Azeem Shaikh ensured consistent use of strscpy through the tree and fixed
the usage in our trace.h.
Chen Aotian fixed a potential memory leak in the hwsim simulator for
ieee802154.
Miquel Raynal updated the MAINATINERS file with the new team git tree
locations and patchwork URLs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Rahul Rameshbabu says:
====================
ptp .adjphase cleanups
The goal of this patch series is to improve documentation of .adjphase, add
a new callback .getmaxphase to enable advertising the max phase offset a
device PHC can support, and support invoking .adjphase from the testptp
kselftest.
Changes:
v2->v1:
* Removes arbitrary rule that the PHC servo must restore the frequency
to the value used in the last .adjfine call if any other PHC
operation is used after a .adjphase operation.
* Removes a macro introduced in v1 for adding PTP sysfs device
attribute nodes using a callback for populating the data.
Link: https://lore.kernel.org/netdev/20230120160609.19160723@kernel.org/
Link: https://lore.kernel.org/netdev/20230510205306.136766-1-rrameshbabu@nvidia.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
