| Age | Commit message (Collapse) | Author |
|---|
|
Like ThinkaPad Thunderbolt 4 Dock, more Lenovo docks start to use the original
Realtek USB ethernet chip ID 0bda:8153.
Lenovo Docks always use their own IDs for usb hub, even for older Docks.
If parent hub is from Lenovo, then r8152 should try MAC passthrough.
Verified on Lenovo TBT3 dock too.
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
elevator_init_mq() is only called before adding disk, when there isn't
any FS I/O, only passthrough requests can be queued, so freezing queue
plus canceling dispatch work is enough to drain any dispatch activities,
then we can avoid synchronize_srcu() in blk_mq_quiesce_queue().
Long boot latency issue can be fixed in case of lots of disks added
during booting.
Fixes: 737eb78e82d5 ("block: Delay default elevator initialization")
Reported-by: yangerkun <yangerkun@huawei.com>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20211117115502.1600950-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When running in VM intel_pmu_snapshot_branch_stack triggers WRMSR warning
like:
[ ] unchecked MSR access error: WRMSR to 0x3f1 (tried to write 0x0000000000000000) at rIP: 0xffffffff81011a5b (intel_pmu_snapshot_branch_stack+0x3b/0xd0)
This can be triggered with BPF selftests:
tools/testing/selftests/bpf/test_progs -t get_branch_snapshot
This warning is caused by __intel_pmu_pebs_disable_all() in the VM.
Since it is not necessary to disable PEBS for LBR, remove it from
intel_pmu_snapshot_branch_stack and intel_pmu_snapshot_arch_branch_stack.
Fixes: c22ac2a3d4bd ("perf: Enable branch record for software events")
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Like Xu <likexu@tencent.com>
Link: https://lore.kernel.org/r/20211112054510.2667030-1-songliubraving@fb.com
|
|
According to the latest uncore document, DATA_REQ_OF_CPU (0x83),
DATA_REQ_BY_CPU (0xc0) and COMP_BUF_OCCUPANCY (0xd5) events have
constraints. Add uncore IIO constraints for Snowridge.
Fixes: 210cc5f9db7a ("perf/x86/intel/uncore: Add uncore support for Snow Ridge server")
Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20211115090334.3789-4-alexander.antonov@linux.intel.com
|
|
According to the latest uncore document, COMP_BUF_OCCUPANCY (0xd5) event
can be collected on 2-3 counters. Update uncore IIO event constraints for
Skylake Server.
Fixes: cd34cd97b7b4 ("perf/x86/intel/uncore: Add Skylake server uncore support")
Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20211115090334.3789-3-alexander.antonov@linux.intel.com
|
|
According Uncore Reference Manual: any of the CHA events may be filtered
by Thread/Core-ID by using tid modifier in CHA Filter 0 Register.
Update skx_cha_hw_config() to follow Uncore Guide.
Fixes: cd34cd97b7b4 ("perf/x86/intel/uncore: Add Skylake server uncore support")
Signed-off-by: Alexander Antonov <alexander.antonov@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lore.kernel.org/r/20211115090334.3789-2-alexander.antonov@linux.intel.com
|
|
The intel_engine_create_virtual() function does not return NULL. It
returns error pointers.
Fixes: e5e32171a2cf ("drm/i915/guc: Connect UAPI to GuC multi-lrc interface")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211116114916.GB11936@kili
(cherry picked from commit fc12b70d12d07598cde27cc17dbfafc2a2a33ff8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
v2: Fix the typo, move out the hardcoding from
macro(Jani, Ville)
Fixes: f87c46c43175 ("drm/i915/dsi/xelpd: Add WA to program LP to HS wakeup guardband")
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211019151435.20477-2-vandita.kulkarni@intel.com
(cherry picked from commit 6f07707fa09e1dc58c431d57c25ef2e68b9bec47)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This reverts commit 991d9557b0c4 ("drm/i915/tgl/dsi: Gate the ddi clocks
after pll mapping"). The Bspec was updated recently with the pll ungate
sequence similar to that of icl dsi enable sequence. Hence reverting.
Bspec: 49187
Fixes: 991d9557b0c4 ("drm/i915/tgl/dsi: Gate the ddi clocks after pll mapping")
Cc: <stable@vger.kernel.org> # v5.4+
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211109120428.15211-1-vandita.kulkarni@intel.com
(cherry picked from commit 4579509ef181480f4e4510d436c691519167c5c2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The cross-reference for the handbooks section works. However, it is
meant to describe the path inside the Kernel's doc where the section
is, but there's an space instead of a dash, plus it lacks the .rst at
the end, which makes:
./scripts/documentation-file-ref-check
to complain.
Fixes: 604370e106cc ("Documentation/process: Add maintainer handbooks section")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Changeset 2f5947dfcaec ("Documentation: move Documentation/virtual to Documentation/virt")
renamed: Documentation/virtual/kvm/vcpu-requests.rst
to: Documentation/virt/kvm/vcpu-requests.rst.
Update its cross-reference accordingly.
Fixes: 2f5947dfcaec ("Documentation: move Documentation/virtual to Documentation/virt")
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The file name: accounting/delay-accounting.rst
should be, instead: Documentation/accounting/delay-accounting.rst.
Also, there's no need to use doc:`foo`, as automarkup.py will
automatically handle plain text mentions to Documentation/
files.
So, update its cross-reference accordingly.
Fixes: fcb501704554 ("delayacct: Document task_delayacct sysctl")
Fixes: c3123552aad3 ("docs: accounting: convert to ReST")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Changeset d20b41115ad5 ("libbpf: Rename libbpf documentation index file")
renamed: Documentation/bpf/libbpf/libbpf.rst
to: Documentation/bpf/libbpf/index.rst.
Update its cross-reference accordingly.
Fixes: d20b41115ad5 ("libbpf: Rename libbpf documentation index file")
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Commit 4f86a06e2d6e ("irqdomain: Make normal and nomap irqdomains
exclusive") introduced an IRQ_DOMAIN_FLAG_NO_MAP flag to isolate the
'nomap' domains still in use under the powerpc arch. With this new
flag, the revmap_tree of the IRQ domain is not used anymore. This
change broke the support of shared LSIs [1] in the XIVE driver because
it was relying on a lookup in the revmap_tree to query previously
mapped interrupts. Linux now creates two distinct IRQ mappings on the
same HW IRQ which can lead to unexpected behavior in the drivers.
The XIVE IRQ domain is not a direct mapping domain and its HW IRQ
interrupt number space is rather large : 1M/socket on POWER9 and
POWER10, change the XIVE driver to use a 'tree' domain type instead.
[1] For instance, a linux KVM guest with virtio-rng and virtio-balloon
devices.
Fixes: 4f86a06e2d6e ("irqdomain: Make normal and nomap irqdomains exclusive")
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211116134022.420412-1-clg@kaod.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-fixes-2021-11-16
Please pull this mlx5 fixes series, or let me know in case of any problem.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sticon_build_attr() checked the reverse argument and flipped
background and foreground color, but returned the non-reverse
value afterwards. Fix this and also add two local variables
for foreground and background color to make the code easier
to read.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The efifb and simplefb drivers just render to a pre-allocated frame buffer
and rely on the display hardware being initialized before the kernel boots.
But if another driver already probed correctly and registered a fbdev, the
generic drivers shouldn't be probed since an actual driver for the display
hardware is already present.
This is more likely to occur after commit d391c5827107 ("drivers/firmware:
move x86 Generic System Framebuffers support") since the "efi-framebuffer"
and "simple-framebuffer" platform devices are registered at a later time.
Link: https://lore.kernel.org/r/20211110200253.rfudkt3edbd3nsyj@lahvuun/
Fixes: d391c5827107 ("drivers/firmware: move x86 Generic System Framebuffers support")
Reported-by: Ilya Trukhanov <lahvuun@gmail.com>
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Ilya Trukhanov <lahvuun@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211111115757.1351045-1-javierm@redhat.com
|
|
When calling setattr_prepare() to determine the validity of the attributes the
ia_{g,u}id fields contain the value that will be written to inode->i_{g,u}id.
When the {g,u}id attribute of the file isn't altered and the caller's fs{g,u}id
matches the current {g,u}id attribute the attribute change is allowed.
The value in ia_{g,u}id does already account for idmapped mounts and will have
taken the relevant idmapping into account. So in order to verify that the
{g,u}id attribute isn't changed we simple need to compare the ia_{g,u}id value
against the inode's i_{g,u}id value.
This only has any meaning for idmapped mounts as idmapping helpers are
idempotent without them. And for idmapped mounts this really only has a meaning
when circular idmappings are used, i.e. mappings where e.g. id 1000 is mapped
to id 1001 and id 1001 is mapped to id 1000. Such ciruclar mappings can e.g. be
useful when sharing the same home directory between multiple users at the same
time.
As an example consider a directory with two files: /source/file1 owned by
{g,u}id 1000 and /source/file2 owned by {g,u}id 1001. Assume we create an
idmapped mount at /target with an idmapping that maps files owned by {g,u}id
1000 to being owned by {g,u}id 1001 and files owned by {g,u}id 1001 to being
owned by {g,u}id 1000. In effect, the idmapped mount at /target switches the
ownership of /source/file1 and source/file2, i.e. /target/file1 will be owned
by {g,u}id 1001 and /target/file2 will be owned by {g,u}id 1000.
This means that a user with fs{g,u}id 1000 must be allowed to setattr
/target/file2 from {g,u}id 1000 to {g,u}id 1000. Similar, a user with fs{g,u}id
1001 must be allowed to setattr /target/file1 from {g,u}id 1001 to {g,u}id
1001. Conversely, a user with fs{g,u}id 1000 must fail to setattr /target/file1
from {g,u}id 1001 to {g,u}id 1000. And a user with fs{g,u}id 1001 must fail to
setattr /target/file2 from {g,u}id 1000 to {g,u}id 1000. Both cases must fail
with EPERM for non-capable callers.
Before this patch we could end up denying legitimate attribute changes and
allowing invalid attribute changes when circular mappings are used. To even get
into this situation the caller must've been privileged both to create that
mapping and to create that idmapped mount.
This hasn't been seen in the wild anywhere but came up when expanding the
testsuite during work on a series of hardening patches. All idmapped fstests
pass without any regressions and we add new tests to verify the behavior of
circular mappings.
Link: https://lore.kernel.org/r/20211109145713.1868404-1-brauner@kernel.org
Fixes: 2f221d6f7b88 ("attr: handle idmapped mounts")
Cc: Seth Forshee <seth.forshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
|
|
drm_sched_job_add_dependency() could drop the last ref, so we need to do
the dma_fence_get() first.
Cc: Christian König <christian.koenig@amd.com>
Fixes: 9c2ba265352a ("drm/scheduler: use new iterator in drm_sched_job_add_implicit_dependencies v2")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211116155545.473311-1-robdclark@gmail.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Christian König <christian.koenig@amd.com>
|
|
The recent addition of timestamp correction to compensate the CDC error
introduced a subtle signed/unsigned bug in stmmac_get_tx_hwtstamp() while
it managed for some obscure reason to avoid that in stmmac_get_rx_hwtstamp().
The issue is:
s64 adjust = 0;
u64 ns;
adjust += -(2 * (NSEC_PER_SEC / priv->plat->clk_ptp_rate));
ns += adjust;
works by chance on 64bit, but falls apart on 32bit because the compiler
knows that adjust fits into 32bit and then treats the addition as a u64 +
u32 resulting in an off by ~2 seconds failure.
The RX variant uses an u64 for adjust and does the adjustment via
ns -= adjust;
because consistency is obviously overrated.
Get rid of the pointless zero initialized adjust variable and do:
ns -= (2 * NSEC_PER_SEC) / priv->plat->clk_ptp_rate;
which is obviously correct and spares the adjust obfuscation. Aside of that
it yields a more accurate result because the multiplication takes place
before the integer divide truncation and not afterwards.
Stick the calculation into an inline so it can't be accidentally
disimproved. Return an u32 from that inline as the result is guaranteed
to fit which lets the compiler optimize the substraction.
Cc: stable@vger.kernel.org
Fixes: 3600be5f58c1 ("net: stmmac: add timestamp correction to rid CDC sync error")
Reported-by: Benedikt Spranger <b.spranger@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Benedikt Spranger <b.spranger@linutronix.de>
Tested-by: Kurt Kanzenbach <kurt@linutronix.de> # Intel EHL
Link: https://lore.kernel.org/r/87mtm578cs.ffs@tglx
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Xin Long says:
====================
net: fix the mirred packet drop due to the incorrect dst
This issue was found when using OVS HWOL on OVN-k8s. These packets
dropped on rx path were seen with output dst, which should've been
dropped from the skbs when redirecting them.
The 1st patch is to the fix and the 2nd is a selftest to reproduce
and verify it.
====================
Link: https://lore.kernel.org/r/cover.1636734751.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
add a selftest that verifies the correct behavior of TC act_mirred egress
to ingress: in particular, it checks if the dst_entry is removed from skb
before redirect egress -> ingress. The correct behavior is: an ICMP 'echo
request' generated by ping will be received and generate a reply the same
way as the one generated by mausezahn.
Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Without dropping dst, the packets sent from local mirred/redirected
to ingress will may still use the old dst. ip_rcv() will drop it as
the old dst is for output and its .input is dst_discard.
This patch is to fix by also dropping dst for those packets that are
mirred or redirected from egress to ingress in act_mirred.
Note that we don't drop it for the direction change from ingress to
egress, as on which there might be a user case attaching a metadata
dst by act_tunnel_key that would be used later.
Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the amt module is being removed, it calls cancel_delayed_work()
to cancel pending delayed_work. But this function doesn't wait for
canceling delayed_work.
So, workers can be still doing after module delete.
In order to avoid this, cancel_delayed_work_sync() should be used instead.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Fixes: bc54e49c140b ("amt: add multicast(IGMP) report message handler")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://lore.kernel.org/r/20211116160923.25258-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
I've sent a patch to GR-everest-linux-l2@marvell.com few days ago and
got a reply from postmaster@marvell.com:
Delivery has failed to these recipients or groups:
gr-everest-linux-l2@marvell.com<mailto:gr-everest-linux-l2@marvell.com>
The email address you entered couldn't be found. Please check the
recipient's email address and try to resend the message. If the problem
continues, please contact your helpdesk.
As requested by Alok Prasad, replacing GR-everest-linux-l2@marvell.com
with Manish Chopra's email address. [0]
Link: https://lore.kernel.org/all/20211116081601.11208-1-palok@marvell.com/ [0]
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20211116141303.32180-1-paskripkin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bp->sriov_cfg is not defined when CONFIG_BNXT_SRIOV is not set. Fix
it by adding a helper function bnxt_sriov_cfg() to handle the logic
with or without the config option.
Fixes: 46d08f55d24e ("bnxt_en: extend RTNL to VF check in devlink driver_reinit")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/1637090770-22835-1-git-send-email-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The kernel test robot reported a following issue:
>> drivers/net/ethernet/marvell/mvmdio.c:426:36: warning:
unused variable 'orion_mdio_acpi_match' [-Wunused-const-variable]
static const struct acpi_device_id orion_mdio_acpi_match[] = {
^
1 warning generated.
Fix that by surrounding the variable by appropriate ifdef.
Fixes: c54da4c1acb1 ("net: mvmdio: add ACPI support")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20211115153024.209083-1-mw@semihalf.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Couple of fixes:
* bad dont-reorder check
* throughput LED trigger for various new(ish) paths
* radiotap header generation
* locking assertions in mac80211 with monitor mode
* radio statistics
* don't try to access IV when not present
* call stop_ap for P2P_GO as well as we should
* tag 'mac80211-for-net-2021-11-16' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211:
mac80211: fix throughput LED trigger
mac80211: fix monitor_sdata RCU/locking assertions
mac80211: drop check for DONT_REORDER in __ieee80211_select_queue
mac80211: fix radiotap header generation
mac80211: do not access the IV when it was stripped
nl80211: fix radio statistics in survey dump
cfg80211: call cfg80211_stop_ap when switch from P2P_GO type
====================
Link: https://lore.kernel.org/r/20211116160845.157214-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2021-11-16
We've added 12 non-merge commits during the last 5 day(s) which contain
a total of 23 files changed, 573 insertions(+), 73 deletions(-).
The main changes are:
1) Fix pruning regression where verifier went overly conservative rejecting
previsouly accepted programs, from Alexei Starovoitov and Lorenz Bauer.
2) Fix verifier TOCTOU bug when using read-only map's values as constant
scalars during verification, from Daniel Borkmann.
3) Fix a crash due to a double free in XSK's buffer pool, from Magnus Karlsson.
4) Fix libbpf regression when cross-building runqslower, from Jean-Philippe Brucker.
5) Forbid use of bpf_ktime_get_coarse_ns() and bpf_timer_*() helpers in tracing
programs due to deadlock possibilities, from Dmitrii Banshchikov.
6) Fix checksum validation in sockmap's udp_read_sock() callback, from Cong Wang.
7) Various BPF sample fixes such as XDP stats in xdp_sample_user, from Alexander Lobakin.
8) Fix libbpf gen_loader error handling wrt fd cleanup, from Kumar Kartikeya Dwivedi.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
udp: Validate checksum in udp_read_sock()
bpf: Fix toctou on read-only map's constant scalar tracking
samples/bpf: Fix build error due to -isystem removal
selftests/bpf: Add tests for restricted helpers
bpf: Forbid bpf_ktime_get_coarse_ns and bpf_timer_* in tracing progs
libbpf: Perform map fd cleanup for gen_loader in case of error
samples/bpf: Fix incorrect use of strlen in xdp_redirect_cpu
tools/runqslower: Fix cross-build
samples/bpf: Fix summary per-sec stats in xdp_sample_user
selftests/bpf: Check map in map pruning
bpf: Fix inner map state pruning regression.
xsk: Fix crash on double free in buffer pool
====================
Link: https://lore.kernel.org/r/20211116141134.6490-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The SCM changes set the flags in mcp->out_mb instead of mcp->in_mb so the
data was not actually being read into the mcp->mb[] array from the adapter.
Link: https://lore.kernel.org/r/20211108183012.13895-1-emilne@redhat.com
Fixes: 9f2475fe7406 ("scsi: qla2xxx: SAN congestion management implementation")
Cc: stable@vger.kernel.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
hba->outstanding_tasks, which is read under host_lock spinlock, tells the
interrupt handler what task management tags are in use by the driver. The
doorbell register bits indicate which tags are in use by the hardware. A
doorbell bit that is 0 is because the bit has yet to be set by the driver,
or because the task is complete. It is only possible to disambiguate the 2
cases, if reading/writing the doorbell register is synchronized with
reading/writing hba->outstanding_tasks.
For that reason, reading REG_UTP_TASK_REQ_DOOR_BELL must be done under
spinlock.
Link: https://lore.kernel.org/r/20211108064815.569494-3-adrian.hunter@intel.com
Fixes: f5ef336fd2e4 ("scsi: ufs: core: Fix task management completion")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
__ufshcd_issue_tm_cmd() clears req->end_io_data after timing out, which
races with the completion function ufshcd_tmc_handler() which expects
req->end_io_data to have a value.
Note __ufshcd_issue_tm_cmd() and ufshcd_tmc_handler() are already
synchronized using hba->tmf_rqs and hba->outstanding_tasks under the
host_lock spinlock.
It is also not necessary (nor typical) to clear req->end_io_data because
the block layer does it before allocating out requests e.g. via
blk_get_request().
So fix by not clearing it.
Link: https://lore.kernel.org/r/20211108064815.569494-2-adrian.hunter@intel.com
Fixes: f5ef336fd2e4 ("scsi: ufs: core: Fix task management completion")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This fixes a regression added with:
commit f0f82e2476f6 ("scsi: core: Fix capacity set to zero after
offlinining device")
The problem is that after iSCSI recovery, iscsid will call into the kernel
to set the dev's state to running, and with that patch we now call
scsi_rescan_device() with the state_mutex held. If the SCSI error handler
thread is just starting to test the device in scsi_send_eh_cmnd() then it's
going to try to grab the state_mutex.
We are then stuck, because when scsi_rescan_device() tries to send its I/O
scsi_queue_rq() calls -> scsi_host_queue_ready() -> scsi_host_in_recovery()
which will return true (the host state is still in recovery) and I/O will
just be requeued. scsi_send_eh_cmnd() will then never be able to grab the
state_mutex to finish error handling.
To prevent the deadlock move the rescan-related code to after we drop the
state_mutex.
This also adds a check for if we are already in the running state. This
prevents extra scans and helps the iscsid case where if the transport class
has already onlined the device during its recovery process then we don't
need userspace to do it again plus possibly block that daemon.
Link: https://lore.kernel.org/r/20211105221048.6541-3-michael.christie@oracle.com
Fixes: f0f82e2476f6 ("scsi: core: Fix capacity set to zero after offlinining device")
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: lijinlin <lijinlin3@huawei.com>
Cc: Wu Bo <wubo40@huawei.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
We can race where iscsi_session_recovery_timedout() has woken up the error
handler thread and it's now setting the devices to offline, and
session_recovery_timedout()'s call to scsi_target_unblock() is also trying
to set the device's state to transport-offline. We can then get a mix of
states.
For the case where we can't relogin we want the devices to be in
transport-offline so when we have repaired the connection
__iscsi_unblock_session() can set the state back to running.
Set the device state then call into libiscsi to wake up the error handler.
Link: https://lore.kernel.org/r/20211105221048.6541-2-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The following has been observed on a test setup:
WARNING: CPU: 4 PID: 250 at drivers/scsi/ufs/ufshcd.c:2737 ufshcd_queuecommand+0x468/0x65c
Call trace:
ufshcd_queuecommand+0x468/0x65c
scsi_send_eh_cmnd+0x224/0x6a0
scsi_eh_test_devices+0x248/0x418
scsi_eh_ready_devs+0xc34/0xe58
scsi_error_handler+0x204/0x80c
kthread+0x150/0x1b4
ret_from_fork+0x10/0x30
That warning is triggered by the following statement:
WARN_ON(lrbp->cmd);
Fix this warning by clearing lrbp->cmd from the abort handler.
Link: https://lore.kernel.org/r/20211104181059.4129537-1-bvanassche@acm.org
Fixes: 7a3e97b0dc4b ("[SCSI] ufshcd: UFS Host controller driver")
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This reverts commit d07f3b081ee632268786601f55e1334d1f68b997.
pstore-blk was fixed to avoid the unwanted APIs in commit 7bb9557b48fc
("pstore/blk: Use the normal block device I/O path"), which landed in
the same release as the commit adding BROKEN.
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20211116181559.3975566-1-keescook@chromium.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If ata_read_log_page() fails to read a log page, the ata_dev_err() error
message only print the page number, omitting the log number. In case of
error, facilitate debugging by also printing the log number.
Cc: stable@kernel.org # 5.15
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: Matthew Perkowski <mgperkow@gmail.com>
|
|
On regular ConnectX HCAs getting encap mode isn't supported when the
E-Switch is in NONE mode. Current code would return no error code when
trying to get encap mode in such case which is wrong.
Fix by returning error value to indicate failure to caller in such case.
Fixes: 8e0aa4bc959c ("net/mlx5: E-switch, Protect eswitch mode changes")
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Currently, In NETDEV_CHANGELOWERSTATE/NETDEV_CHANGEUPPERSTATE events
handling, tracking is not fully completed if the LAG device is not ready
at the time the events occur. But, we must keep track of the upper and
lower states after receiving the events because RoCE needs this info in
mlx5_lag_get_roce_netdev() - in order to return the corresponding port
that its running on. Returning the wrong (not most recent) port will lead
to gids table being incorrect.
For example: If during the attachment of a slave to the bond, the other
non-attached port performs pci_reload, then the LAG device is not ready,
but that should not result in dismissing attached slave tracker update
automatically (which is performed in mlx5_handle_changelowerstate()), Since
these events might not come later, which can lead to both bond ports
having tx_enabled=0 - which is not a valid state of LAG bond.
Fixes: 9b412cc35f00 ("net/mlx5e: Add LAG warning if bond slave is not lag master")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
CT clear action offload adds additional mod hdr actions to the
flow's original mod actions in order to clear the registers which
hold ct_state.
When such flow also includes encap action, a neigh update event
can cause the driver to unoffload the flow and then reoffload it.
Each time this happens, the ct clear handling adds that same set
of mod hdr actions to reset ct_state until the max of mod hdr
actions is reached.
Also the driver never releases the allocated mod hdr actions and
causing a memleak.
Fix above two issues by moving CT clear mod acts allocation
into the parsing actions phase and only use it when offloading the rule.
The release of mod acts will be done in the normal flow_put().
backtrace:
[<000000007316e2f3>] krealloc+0x83/0xd0
[<00000000ef157de1>] mlx5e_mod_hdr_alloc+0x147/0x300 [mlx5_core]
[<00000000970ce4ae>] mlx5e_tc_match_to_reg_set_and_get_id+0xd7/0x240 [mlx5_core]
[<0000000067c5fa17>] mlx5e_tc_match_to_reg_set+0xa/0x20 [mlx5_core]
[<00000000d032eb98>] mlx5_tc_ct_entry_set_registers.isra.0+0x36/0xc0 [mlx5_core]
[<00000000fd23b869>] mlx5_tc_ct_flow_offload+0x272/0x1f10 [mlx5_core]
[<000000004fc24acc>] mlx5e_tc_offload_fdb_rules.part.0+0x150/0x620 [mlx5_core]
[<00000000dc741c17>] mlx5e_tc_encap_flows_add+0x489/0x690 [mlx5_core]
[<00000000e92e49d7>] mlx5e_rep_update_flows+0x6e4/0x9b0 [mlx5_core]
[<00000000f60f5602>] mlx5e_rep_neigh_update+0x39a/0x5d0 [mlx5_core]
Fixes: 1ef3018f5af3 ("net/mlx5e: CT: Support clear action")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When doing a flow counters bulk query, the number of counters to query
must be aligned to 4. Current SF bulk query len is not aligned to 4,
which leads to an error when trying to query more than 4 counters.
Fix it by aligning SF bulk query len to 4.
Fixes: 2fdeb4f4c2ae ("net/mlx5: Reduce flow counters bulk query buffer size for SFs")
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
A user can enable VFs without changing E-Switch mode, this can happen
when a user moves straight to switchdev mode and only once in switchdev
VFs are enabled via the sysfs interface.
The cited commit assumed this isn't possible and exposed a single
API function where the E-switch calls into the lag code, breaks the lag
and prevents any other lag operations to take place until the
E-switch update has ended.
Breaking the hardware lag when it isn't needed can make it such that
hardware lag can't be enabled again.
In the sysfs call path check if the current E-Switch mode is NONE,
in the context of the function it can only mean the E-Switch is moving
out of NONE mode and the hardware lag should be disabled and enabled
once the mode change has ended. If the mode isn't NONE it means
VFs are about to be enabled and such operation doesn't require
toggling the hardware lag.
Fixes: cac1eb2cf2e3 ("net/mlx5: Lag, properly lock eswitch if needed")
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In the fast unload flow, the device state is set to internal error,
which indicates that the driver started the destroy process.
In this case, when a destroy command is being executed, it should return
MLX5_CMD_STAT_OK.
Fix MLX5_CMD_OP_DESTROY_UCTX and MLX5_CMD_OP_DESTROY_UMEM to return OK
instead of EIO.
This fixes a call trace in the umem release process -
[ 2633.536695] Call Trace:
[ 2633.537518] ib_uverbs_remove_one+0xc3/0x140 [ib_uverbs]
[ 2633.538596] remove_client_context+0x8b/0xd0 [ib_core]
[ 2633.539641] disable_device+0x8c/0x130 [ib_core]
[ 2633.540615] __ib_unregister_device+0x35/0xa0 [ib_core]
[ 2633.541640] ib_unregister_device+0x21/0x30 [ib_core]
[ 2633.542663] __mlx5_ib_remove+0x38/0x90 [mlx5_ib]
[ 2633.543640] auxiliary_bus_remove+0x1e/0x30 [auxiliary]
[ 2633.544661] device_release_driver_internal+0x103/0x1f0
[ 2633.545679] bus_remove_device+0xf7/0x170
[ 2633.546640] device_del+0x181/0x410
[ 2633.547606] mlx5_rescan_drivers_locked.part.10+0x63/0x160 [mlx5_core]
[ 2633.548777] mlx5_unregister_device+0x27/0x40 [mlx5_core]
[ 2633.549841] mlx5_uninit_one+0x21/0xc0 [mlx5_core]
[ 2633.550864] remove_one+0x69/0xe0 [mlx5_core]
[ 2633.551819] pci_device_remove+0x3b/0xc0
[ 2633.552731] device_release_driver_internal+0x103/0x1f0
[ 2633.553746] unbind_store+0xf6/0x130
[ 2633.554657] kernfs_fop_write+0x116/0x190
[ 2633.555567] vfs_write+0xa5/0x1a0
[ 2633.556407] ksys_write+0x4f/0xb0
[ 2633.557233] do_syscall_64+0x5b/0x1a0
[ 2633.558071] entry_SYSCALL_64_after_hwframe+0x65/0xca
[ 2633.559018] RIP: 0033:0x7f9977132648
[ 2633.559821] Code: 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 55 6f 2d 00 8b 00 85 c0 75 17 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 49 89 d4 55
[ 2633.562332] RSP: 002b:00007fffb1a83888 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 2633.563472] RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007f9977132648
[ 2633.564541] RDX: 000000000000000c RSI: 000055b90546e230 RDI: 0000000000000001
[ 2633.565596] RBP: 000055b90546e230 R08: 00007f9977406860 R09: 00007f9977a54740
[ 2633.566653] R10: 0000000000000000 R11: 0000000000000246 R12: 00007f99774056e0
[ 2633.567692] R13: 000000000000000c R14: 00007f9977400880 R15: 000000000000000c
[ 2633.568725] ---[ end trace 10b4fe52945e544d ]---
Fixes: 6a6fabbfa3e8 ("net/mlx5: Update pci error handler entries and command translation")
Signed-off-by: Neta Ostrovsky <netao@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
The existing loop doesn't cast the buffer while scanning it, which
results in out-of-bounds read and failure to create the matcher.
Fixes: 941f19798a11 ("net/mlx5: DR, Add check for unsupported fields in match param")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
When querying eswitch manager vport capabilities as "other = 1",
we encounter a FW compatibility issue with older FW versions.
To maintain backward compatibility, eswitch manager vport should
be queried as "other = 0" vport both for ECPF and non-ECPF cases.
This patch fixes these queries and improves the code readability
by handling eswitch manager and uplink vports separately, avoiding
the excessive 'if' conditions. Also, uplink caps are stored similar
to esw manager and not as part of xarray.
Fixes: dd4acb2a0954 ("net/mlx5: DR, Add missing query for vport 0")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Prior to this patch in case mlx5_core_destroy_cq() failed it proceeds
to rest of destroy operations. mlx5_core_destroy_cq() could be called again
by user and cause additional call of mlx5_debug_cq_remove().
cq->dbg was not nullify in previous call and cause the crash.
Fix it by nullify cq->dbg pointer after removal.
Also proceed to destroy operations only if FW return 0
for MLX5_CMD_OP_DESTROY_CQ command.
general protection fault, probably for non-canonical address 0x2000300004058: 0000 [#1] SMP PTI
CPU: 5 PID: 1228 Comm: python Not tainted 5.15.0-rc5_for_upstream_min_debug_2021_10_14_11_06 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:lockref_get+0x1/0x60
Code: 5d e9 53 ff ff ff 48 8d 7f 70 e8 0a 2e 48 00 c7 85 d0 00 00 00 02
00 00 00 c6 45 70 00 fb 5d c3 c3 cc cc cc cc cc cc cc cc 53 <48> 8b 17
48 89 fb 85 d2 75 3d 48 89 d0 bf 64 00 00 00 48 89 c1 48
RSP: 0018:ffff888137dd7a38 EFLAGS: 00010206
RAX: 0000000000000000 RBX: ffff888107d5f458 RCX: 00000000fffffffe
RDX: 000000000002c2b0 RSI: ffffffff8155e2e0 RDI: 0002000300004058
RBP: ffff888137dd7a88 R08: 0002000300004058 R09: ffff8881144a9f88
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881141d4000
R13: ffff888137dd7c68 R14: ffff888137dd7d58 R15: ffff888137dd7cc0
FS: 00007f4644f2a4c0(0000) GS:ffff8887a2d40000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055b4500f4380 CR3: 0000000114f7a003 CR4: 0000000000170ea0
Call Trace:
simple_recursive_removal+0x33/0x2e0
? debugfs_remove+0x60/0x60
debugfs_remove+0x40/0x60
mlx5_debug_cq_remove+0x32/0x70 [mlx5_core]
mlx5_core_destroy_cq+0x41/0x1d0 [mlx5_core]
devx_obj_cleanup+0x151/0x330 [mlx5_ib]
? __pollwait+0xd0/0xd0
? xas_load+0x5/0x70
? xa_load+0x62/0xa0
destroy_hw_idr_uobject+0x20/0x80 [ib_uverbs]
uverbs_destroy_uobject+0x3b/0x360 [ib_uverbs]
uobj_destroy+0x54/0xa0 [ib_uverbs]
ib_uverbs_cmd_verbs+0xaf2/0x1160 [ib_uverbs]
? uverbs_finalize_object+0xd0/0xd0 [ib_uverbs]
ib_uverbs_ioctl+0xc4/0x1b0 [ib_uverbs]
__x64_sys_ioctl+0x3e4/0x8e0
Fixes: 94b960b9deff ("net/mlx5e: Fix memory leak in mlx5_core_destroy_cq() error path")
Signed-off-by: Valentine Fatiev <valentinef@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
E-Switch encap mode is relevant only when in switchdev mode.
The RDMA driver can query the encap configuration via
mlx5_eswitch_get_encap_mode(). Make sure it returns the currently
used mode and not the set one.
This reverts the cited commit which reset the encap mode
on entering switchdev and fixes the original issue properly.
Fixes: 9a64144d683a ("net/mlx5: E-Switch, Fix default encap mode")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Function mlx5e_take_tmp_flow() skips flows with zero reference count. This
can cause syndrome 0x179e84 when the called from neigh or route update code
and the skipped flow is not removed from the hardware by the time
underlying encap/decap resource is deleted. Add new completion
'del_hw_done' that is completed when flow is unoffloaded. This is safe to
do because flow with reference count zero needs to be detached from
encap/decap entry before its memory is deallocated, which requires taking
the encap_tbl_lock mutex that is held by the event handlers code.
Fixes: 8914add2c9e5 ("net/mlx5e: Handle FIB events to update tunnel endpoint device")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
For the TLS RX resync flow, we maintain a list of TLS contexts
that require some attention, to communicate their resync information
to the HW.
Here we fix list corruptions, by protecting the entries against
movements coming from resync_handle_seq_match(), until their resync
handling in napi is fully completed.
Fixes: e9ce991bce5b ("net/mlx5e: kTLS, Add resiliency to RX resync failures")
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
During the suspend is in process, thermal_zone_device_update bails out
thermal zone re-evaluation for any sensor trip violation without
setting next valid trip to that sensor. It assumes during resume
it will re-evaluate same thermal zone and update trip. But when it is
in suspend temperature goes down and on resume path while updating
thermal zone if temperature is less than previously violated trip,
thermal zone set trip function evaluates the same previous high and
previous low trip as new high and low trip. Since there is no change
in high/low trip, it bails out from thermal zone set trip API without
setting any trip. It leads to a case where sensor high trip or low
trip is disabled forever even though thermal zone has a valid high
or low trip.
During thermal zone device init, reset thermal zone previous high
and low trip. It resolves above mentioned scenario.
Signed-off-by: Manaf Meethalavalappu Pallikunhi <manafm@codeaurora.org>
Reviewed-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
