| Age | Commit message (Collapse) | Author |
|---|
|
The main EEPROM of KEBA CP500 devices is divided into two sections. One
section for type label data like device name, order number, serial
number and so on. The second section is reserved for arbitrary data
stored by the user.
The two sections have a defined range. The first 3 kB for the type label
and the remaining 1 kB for user data. The type label is written during
production and can fill up the whole 3 kB. Thus, the range is fixed and
cannot be changed dynamically.
The two sections cannot be presented as NVMEM cells. A NVMEM cell is
always read and written at once, because the data presented to the user
can differ from the data stored in the physical NVMEM cell. Thus, NVMEM
cells would lead to reading 3 kB for every type label access, even if
only the device name is read. So performance would suffer. But it is
also an indication that NVMEM cells are designed for small data cells
within NVMEM devices.
Register separate NVMEM devices for every section. This enables safe
access to every section. Also different access rights are then possible.
Signed-off-by: Gerhard Engleder <eg@keba.com>
Link: https://lore.kernel.org/r/20241011191257.19702-6-gerhard@engleder-embedded.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
KEBA CP500 devices use the LAN9252 controller for EtherCAT
communication. For a stable Ethernet link the PHY registers of the
controller need to be configured correctly. This driver configures these
PHY registers as required.
Signed-off-by: Gerhard Engleder <eg@keba.com>
Link: https://lore.kernel.org/r/20241011191257.19702-5-gerhard@engleder-embedded.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for the SPI controller auxiliary device. This enables access
to the SPI flash of the FPGA and some other SPI devices.
The actual list of SPI devices is detected by reading some bits out of
the previously registered I2C EEPROM.
Signed-off-by: Gerhard Engleder <eg@keba.com>
Link: https://lore.kernel.org/r/20241011191257.19702-4-gerhard@engleder-embedded.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Print "I2C" instead of "i2c" in error message as "I2C" is the official
name for the bus.
Signed-off-by: Gerhard Engleder <eg@keba.com>
Link: https://lore.kernel.org/r/20241011191257.19702-3-gerhard@engleder-embedded.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
One function of the cp500 driver uses the variable name retval for
return values but all others use the variable name ret. Use ret for
return values in all functions.
Signed-off-by: Gerhard Engleder <eg@keba.com>
Link: https://lore.kernel.org/r/20241011191257.19702-2-gerhard@engleder-embedded.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the following case:
struct irq_data *irq_data = irq_get_irq_data(irq);
if (irq_data && irqd_get_trigger_type(irq_data) ... ) {
...
}
to the simpler:
if (irq_get_trigger_type(irq) ... ) {
...
}
by using the irq_get_trigger_type() function.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240912235925.54465-3-vassilisamir@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the following case:
struct irq_data *irq_data = irq_get_irq_data(irq);
if (irq_data && irqd_get_trigger_type(irq_data) ... ) {
...
}
to the simpler:
if (irq_get_trigger_type(irq) ... ) {
...
}
by using the irq_get_trigger_type() function.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240912235925.54465-2-vassilisamir@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is an error path that checks whether the return value is
-EPROBE_DEFER to decide whether to print the error message: that
is exactly open-coding dev_err_probe(), so, switch to that.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240919120208.152987-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add the pending proc->delivered_freeze work to the debugfs output. This
information was omitted in the original implementation of the freeze
notification and can be valuable for debugging issues.
Fixes: d579b04a52a1 ("binder: frozen notification")
Cc: stable@vger.kernel.org
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Acked-by: Todd Kjos <tkjos@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240926233632.821189-9-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If a freeze notification is cleared with BC_CLEAR_FREEZE_NOTIFICATION
before calling binder_freeze_notification_done(), then it is detached
from its reference (e.g. ref->freeze) but the work remains queued in
proc->delivered_freeze. This leads to a memory leak when the process
exits as any pending entries in proc->delivered_freeze are not freed:
unreferenced object 0xffff38e8cfa36180 (size 64):
comm "binder-util", pid 655, jiffies 4294936641
hex dump (first 32 bytes):
b8 e9 9e c8 e8 38 ff ff b8 e9 9e c8 e8 38 ff ff .....8.......8..
0b 00 00 00 00 00 00 00 3c 1f 4b 00 00 00 00 00 ........<.K.....
backtrace (crc 95983b32):
[<000000000d0582cf>] kmemleak_alloc+0x34/0x40
[<000000009c99a513>] __kmalloc_cache_noprof+0x208/0x280
[<00000000313b1704>] binder_thread_write+0xdec/0x439c
[<000000000cbd33bb>] binder_ioctl+0x1b68/0x22cc
[<000000002bbedeeb>] __arm64_sys_ioctl+0x124/0x190
[<00000000b439adee>] invoke_syscall+0x6c/0x254
[<00000000173558fc>] el0_svc_common.constprop.0+0xac/0x230
[<0000000084f72311>] do_el0_svc+0x40/0x58
[<000000008b872457>] el0_svc+0x38/0x78
[<00000000ee778653>] el0t_64_sync_handler+0x120/0x12c
[<00000000a8ec61bf>] el0t_64_sync+0x190/0x194
This patch fixes the leak by ensuring that any pending entries in
proc->delivered_freeze are freed during binder_deferred_release().
Fixes: d579b04a52a1 ("binder: frozen notification")
Cc: stable@vger.kernel.org
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Todd Kjos <tkjos@google.com>
Link: https://lore.kernel.org/r/20240926233632.821189-8-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Alice points out that binder_request_freeze_notification() should not
return EINVAL when the relevant node is dead [1]. The node can die at
any point even if the user input is valid. Instead, allow the request
to be allocated but skip the initial notification for dead nodes. This
avoids propagating unnecessary errors back to userspace.
Fixes: d579b04a52a1 ("binder: frozen notification")
Cc: stable@vger.kernel.org
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/all/CAH5fLghapZJ4PbbkC8V5A6Zay-_sgTzwVpwqk6RWWUNKKyJC_Q@mail.gmail.com/ [1]
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Acked-by: Todd Kjos <tkjos@google.com>
Link: https://lore.kernel.org/r/20240926233632.821189-7-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
proc 699
context binder-test
thread 699: l 00 need_return 0 tr 0
ref 25: desc 1 node 20 s 1 w 0 d 00000000c03e09a3
unknown work: type 11
proc 640
context binder-test
thread 640: l 00 need_return 0 tr 0
ref 8: desc 1 node 3 s 1 w 0 d 000000002bb493e1
has cleared freeze notification
Fixes: d579b04a52a1 ("binder: frozen notification")
Cc: stable@vger.kernel.org
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Todd Kjos <tkjos@google.com>
Link: https://lore.kernel.org/r/20240926233632.821189-6-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The BINDER_WORK_FROZEN_BINDER type is not handled in the binder_logs
entries and it shows up as "unknown work" when logged:
proc 649
context binder-test
thread 649: l 00 need_return 0 tr 0
ref 13: desc 1 node 8 s 1 w 0 d 0000000053c4c0c3
unknown work: type 10
This patch add the freeze work type and is now logged as such:
proc 637
context binder-test
thread 637: l 00 need_return 0 tr 0
ref 8: desc 1 node 3 s 1 w 0 d 00000000dc39e9c6
has frozen binder
Fixes: d579b04a52a1 ("binder: frozen notification")
Cc: stable@vger.kernel.org
Acked-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240926233632.821189-5-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When a binder reference is cleaned up, any freeze work queued in the
associated process should also be removed. Otherwise, the reference is
freed while its ref->freeze.work is still queued in proc->work leading
to a use-after-free issue as shown by the following KASAN report:
==================================================================
BUG: KASAN: slab-use-after-free in binder_release_work+0x398/0x3d0
Read of size 8 at addr ffff31600ee91488 by task kworker/5:1/211
CPU: 5 UID: 0 PID: 211 Comm: kworker/5:1 Not tainted 6.11.0-rc7-00382-gfc6c92196396 #22
Hardware name: linux,dummy-virt (DT)
Workqueue: events binder_deferred_func
Call trace:
binder_release_work+0x398/0x3d0
binder_deferred_func+0xb60/0x109c
process_one_work+0x51c/0xbd4
worker_thread+0x608/0xee8
Allocated by task 703:
__kmalloc_cache_noprof+0x130/0x280
binder_thread_write+0xdb4/0x42a0
binder_ioctl+0x18f0/0x25ac
__arm64_sys_ioctl+0x124/0x190
invoke_syscall+0x6c/0x254
Freed by task 211:
kfree+0xc4/0x230
binder_deferred_func+0xae8/0x109c
process_one_work+0x51c/0xbd4
worker_thread+0x608/0xee8
==================================================================
This commit fixes the issue by ensuring any queued freeze work is removed
when cleaning up a binder reference.
Fixes: d579b04a52a1 ("binder: frozen notification")
Cc: stable@vger.kernel.org
Acked-by: Todd Kjos <tkjos@android.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20240926233632.821189-4-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In binder_add_freeze_work() we iterate over the proc->nodes with the
proc->inner_lock held. However, this lock is temporarily dropped to
acquire the node->lock first (lock nesting order). This can race with
binder_deferred_release() which removes the nodes from the proc->nodes
rbtree and adds them into binder_dead_nodes list. This leads to a broken
iteration in binder_add_freeze_work() as rb_next() will use data from
binder_dead_nodes, triggering an out-of-bounds access:
==================================================================
BUG: KASAN: global-out-of-bounds in rb_next+0xfc/0x124
Read of size 8 at addr ffffcb84285f7170 by task freeze/660
CPU: 8 UID: 0 PID: 660 Comm: freeze Not tainted 6.11.0-07343-ga727812a8d45 #18
Hardware name: linux,dummy-virt (DT)
Call trace:
rb_next+0xfc/0x124
binder_add_freeze_work+0x344/0x534
binder_ioctl+0x1e70/0x25ac
__arm64_sys_ioctl+0x124/0x190
The buggy address belongs to the variable:
binder_dead_nodes+0x10/0x40
[...]
==================================================================
This is possible because proc->nodes (rbtree) and binder_dead_nodes
(list) share entries in binder_node through a union:
struct binder_node {
[...]
union {
struct rb_node rb_node;
struct hlist_node dead_node;
};
Fix the race by checking that the proc is still alive. If not, simply
break out of the iteration.
Fixes: d579b04a52a1 ("binder: frozen notification")
Cc: stable@vger.kernel.org
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20240926233632.821189-3-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In binder_add_freeze_work() we iterate over the proc->nodes with the
proc->inner_lock held. However, this lock is temporarily dropped in
order to acquire the node->lock first (lock nesting order). This can
race with binder_node_release() and trigger a use-after-free:
==================================================================
BUG: KASAN: slab-use-after-free in _raw_spin_lock+0xe4/0x19c
Write of size 4 at addr ffff53c04c29dd04 by task freeze/640
CPU: 5 UID: 0 PID: 640 Comm: freeze Not tainted 6.11.0-07343-ga727812a8d45 #17
Hardware name: linux,dummy-virt (DT)
Call trace:
_raw_spin_lock+0xe4/0x19c
binder_add_freeze_work+0x148/0x478
binder_ioctl+0x1e70/0x25ac
__arm64_sys_ioctl+0x124/0x190
Allocated by task 637:
__kmalloc_cache_noprof+0x12c/0x27c
binder_new_node+0x50/0x700
binder_transaction+0x35ac/0x6f74
binder_thread_write+0xfb8/0x42a0
binder_ioctl+0x18f0/0x25ac
__arm64_sys_ioctl+0x124/0x190
Freed by task 637:
kfree+0xf0/0x330
binder_thread_read+0x1e88/0x3a68
binder_ioctl+0x16d8/0x25ac
__arm64_sys_ioctl+0x124/0x190
==================================================================
Fix the race by taking a temporary reference on the node before
releasing the proc->inner lock. This ensures the node remains alive
while in use.
Fixes: d579b04a52a1 ("binder: frozen notification")
Cc: stable@vger.kernel.org
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20240926233632.821189-2-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is no need for explicit locking when using the ida API, as stated in
the doc related to ida_alloc_range() / ida_free().
So remove rpmb_mutex.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/b1fcc6707ec2b6309d50060fa52ccc2c892afde2.1728507153.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().
This is less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/df8bfbe2a603c596566a4f967e37d10d208bbc3f.1728507153.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The variable "wret" is never referenced in the code, just remove it.
Signed-off-by: Ba Jing <bajing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20240903041620.10812-1-bajing@cmss.chinamobile.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The pm_runtime_disable() is missing in probe error path,
so add it to fix it.
Fixes: 92b1f84d46b2 ("drivers/misc: driver for APDS990X ALS and proximity sensors")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20240923035556.3009105-1-ruanjinjie@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixes checkpatch warning: Prefer 'unsigned int' to bare use of 'unsigned'.
Signed-off-by: Daniel Hejduk <danielhejduk@disroot.org>
Link: https://lore.kernel.org/r/20241005165653.26160-1-danielhejduk@disroot.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Reorganize kerneldoc parameter names to match the parameter
order in the function header.
Problems identified using Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20240930112121.95324-14-Julia.Lawall@inria.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Change maintainer of mei driver to Alexander Usyskin
Cc: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://lore.kernel.org/r/20240930090604.1788402-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Provide a `MiscDevice` trait that lets you specify the file operations
that you wish to provide for your misc device. For now, only three file
operations are provided: open, close, ioctl.
These abstractions only support MISC_DYNAMIC_MINOR. This enforces that
new miscdevices should not hard-code a minor number.
When implementing ioctl, the Result type is used. This means that you
can choose to return either of:
* An integer of type isize.
* An errno using the kernel::error::Error type.
When returning an isize, the integer is returned verbatim. It's mainly
intended for returning positive integers to userspace. However, it is
technically possible to return errors via the isize return value too.
To avoid having a dependency on files, this patch does not provide the
file operations callbacks a pointer to the file. This means that they
cannot check file properties such as O_NONBLOCK (which Binder needs).
Support for that can be added as a follow-up.
To avoid having a dependency on vma, this patch does not provide any way
to implement mmap (which Binder needs). Support for that can be added as
a follow-up.
Rust Binder will use these abstractions to create the /dev/binder file
when binderfs is disabled.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/rust-for-linux/20240328195457.225001-1-wedsonaf@gmail.com/
Link: https://lore.kernel.org/r/20241001-b4-miscdevice-v2-2-330d760041fa@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This will be used by the miscdevice abstractions, as the C function
`misc_register` is fallible.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Link: https://lore.kernel.org/r/20241001-b4-miscdevice-v2-1-330d760041fa@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Move non-boot built-in DTBs to the .rodata section
- Fix Kconfig bugs
- Fix maint scripts in the linux-image Debian package
- Import some list macros to scripts/include/
* tag 'kbuild-fixes-v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: deb-pkg: Remove blank first line from maint scripts
kbuild: fix a typo dt_binding_schema -> dt_binding_schemas
scripts: import more list macros
kconfig: qconf: fix buffer overflow in debug links
kconfig: qconf: move conf_read() before drawing tree pain
kconfig: clear expr::val_is_valid when allocated
kconfig: fix infinite loop in sym_calc_choice()
kbuild: move non-boot built-in DTBs to .rodata section
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- Intel PMC fix for suspend/resume issues on some Sky and Kaby Lake
laptops
- Intel Diamond Rapids hw-id additions
- Documentation and MAINTAINERS fixes
- Some other small fixes
* tag 'platform-drivers-x86-v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: x86-android-tablets: Fix use after free on platform_device_register() errors
platform/x86: wmi: Update WMI driver API documentation
platform/x86: dell-ddv: Fix typo in documentation
platform/x86: dell-sysman: add support for alienware products
platform/x86/intel: power-domains: Add Diamond Rapids support
platform/x86: ISST: Add Diamond Rapids to support list
platform/x86:intel/pmc: Disable ACPI PM Timer disabling on Sky and Kaby Lake
platform/x86: dell-laptop: Do not fail when encountering unsupported batteries
MAINTAINERS: Update Intel In Field Scan(IFS) entry
platform/x86: ISST: Fix the KASAN report slab-out-of-bounds bug
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
x86:
- Fix compilation with KVM_INTEL=KVM_AMD=n
- Fix disabling KVM_X86_QUIRK_SLOT_ZAP_ALL when shadow MMU is in use
Selftests:
- Fix compilation on non-x86 architectures"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86/reboot: emergency callbacks are now registered by common KVM code
KVM: x86: leave kvm.ko out of the build if no vendor module is requested
KVM: x86/mmu: fix KVM_X86_QUIRK_SLOT_ZAP_ALL for shadow MMU
KVM: arm64: Fix kvm_has_feat*() handling of negative features
KVM: selftests: Fix build on architectures other than x86_64
KVM: arm64: Another reviewer reshuffle
KVM: arm64: Constrain the host to the maximum shared SVE VL with pKVM
KVM: arm64: Fix __pkvm_init_vcpu cptr_el2 error path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
- Allow r30 to be used in vDSO code generation of getrandom
Thanks to Jason A. Donenfeld
* tag 'powerpc-6.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/vdso: allow r30 in vDSO code generation of getrandom
|
|
The blank line causes execve() to fail:
# strace ./postinst
execve("./postinst", ...) = -1 ENOEXEC (Exec format error)
strace: exec: Exec format error
+++ exited with 1 +++
However running the scripts via shell does work (at least with bash)
because the shell attempts to execute the file as a shell script when
execve() fails.
Fixes: b611daae5efc ("kbuild: deb-pkg: split image and debug objects staging out into functions")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
If we follow "make help" to "make dt_binding_schema", we will see
below error:
$ make dt_binding_schema
make[1]: *** No rule to make target 'dt_binding_schema'. Stop.
make: *** [Makefile:224: __sub-make] Error 2
It should be a typo. So this will fix it.
Fixes: 604a57ba9781 ("dt-bindings: kbuild: Add separate target/dependency for processed-schema.json")
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Import list_is_first, list_is_last, list_replace, and list_replace_init.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
platform_device_register() errors
x86_android_tablet_remove() frees the pdevs[] array, so it should not
be used after calling x86_android_tablet_remove().
When platform_device_register() fails, store the pdevs[x] PTR_ERR() value
into the local ret variable before calling x86_android_tablet_remove()
to avoid using pdevs[] after it has been freed.
Fixes: 5eba0141206e ("platform/x86: x86-android-tablets: Add support for instantiating platform-devs")
Fixes: e2200d3f26da ("platform/x86: x86-android-tablets: Add gpio_keys support to x86_android_tablet_init()")
Cc: stable@vger.kernel.org
Reported-by: Aleksandr Burakov <a.burakov@rosalinux.ru>
Closes: https://lore.kernel.org/platform-driver-x86/20240917120458.7300-1-a.burakov@rosalinux.ru/
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20241005130545.64136-1-hdegoede@redhat.com
|
|
The WMI driver core now passes the WMI event data to legacy notify
handlers, so WMI devices sharing notification IDs are now being
handled properly.
Fixes: e04e2b760ddb ("platform/x86: wmi: Pass event data directly to legacy notify handlers")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241005213825.701887-1-W_Armin@gmx.de
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Fix typo in word 'diagnostics' in documentation.
Signed-off-by: Anaswara T Rajan <anaswaratrajan@gmail.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241005070056.16326-1-anaswaratrajan@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Alienware supports firmware-attributes and has its own OEM string.
Signed-off-by: Crag Wang <crag_wang@dell.com>
Link: https://lore.kernel.org/r/20241004152826.93992-1-crag_wang@dell.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add Diamond Rapids (INTEL_PANTHERCOVE_X) to tpmi_cpu_ids to support
domaid id mappings.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20241003215554.3013807-3-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add Diamond Rapids (INTEL_PANTHERCOVE_X) to SST support list by adding
to isst_cpu_ids.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://lore.kernel.org/r/20241003215554.3013807-2-srinivas.pandruvada@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
There have been multiple reports that the ACPI PM Timer disabling is
causing Sky and Kaby Lake systems to hang on all suspend (s2idle, s3,
hibernate) methods.
Remove the acpi_pm_tmr_ctl_offset and acpi_pm_tmr_disable_bit settings from
spt_reg_map to disable the ACPI PM Timer disabling on Sky and Kaby Lake to
fix the hang on suspend.
Fixes: e86c8186d03a ("platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/linux-pm/18784f62-91ff-4d88-9621-6c88eb0af2b5@molgen.mpg.de/
Reported-by: Todd Brandt <todd.e.brandt@intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219346
Cc: Marek Maslanka <mmaslanka@google.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Todd Brandt <todd.e.brandt@intel.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 13 9360/0596KF
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20241003202614.17181-2-hdegoede@redhat.com
|
|
If the battery hook encounters a unsupported battery, it will
return an error. This in turn will cause the battery driver to
automatically unregister the battery hook.
On machines with multiple batteries however, this will prevent
the battery hook from handling the primary battery, since it will
always get unregistered upon encountering one of the unsupported
batteries.
Fix this by simply ignoring unsupported batteries.
Reviewed-by: Pali Rohár <pali@kernel.org>
Fixes: ab58016c68cc ("platform/x86:dell-laptop: Add knobs to change battery charge settings")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://lore.kernel.org/r/20241001212835.341788-4-W_Armin@gmx.de
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Ashok is no longer with Intel and his e-mail address will start bouncing
soon. Update his email address to the new one he provided to ensure
correct contact details in the MAINTAINERS file.
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Link: https://lore.kernel.org/r/20241001170808.203970-1-jithu.joseph@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.12, take #1
- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail
- Make sure that the host's vector length is at capped by a value
common to all CPUs
- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken
- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly
|
|
Guard them with CONFIG_KVM_X86_COMMON rather than the two vendor modules.
In practice this has no functional change, because CONFIG_KVM_X86_COMMON
is set if and only if at least one vendor-specific module is being built.
However, it is cleaner to specify CONFIG_KVM_X86_COMMON for functions that
are used in kvm.ko.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 590b09b1d88e ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Fixes: 6d55a94222db ("x86/reboot: Unconditionally define cpu_emergency_virt_cb typedef")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
kvm.ko is nothing but library code shared by kvm-intel.ko and kvm-amd.ko.
It provides no functionality on its own and it is unnecessary unless one
of the vendor-specific module is compiled. In particular, /dev/kvm is
not created until one of kvm-intel.ko or kvm-amd.ko is loaded.
Use CONFIG_KVM to decide if it is built-in or a module, but use the
vendor-specific modules for the actual decision on whether to build it.
This also fixes a build failure when CONFIG_KVM_INTEL and CONFIG_KVM_AMD
are both disabled. The cpu_emergency_register_virt_callback() function
is called from kvm.ko, but it is only defined if at least one of
CONFIG_KVM_INTEL and CONFIG_KVM_AMD is provided.
Fixes: 590b09b1d88e ("KVM: x86: Register "emergency disable" callbacks when virt is enabled")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pull bcachefs fixes from Kent Overstreet:
"A lot of little fixes, bigger ones include:
- bcachefs's __wait_on_freeing_inode() was broken in rc1 due to vfs
changes, now fixed along with another lost wakeup
- fragmentation LRU fixes; fsck now repairs successfully (this is the
data structure copygc uses); along with some nice simplification.
- Rework logged op error handling, so that if logged op replay errors
(due to another filesystem error) we delete the logged op instead
of going into an infinite loop)
- Various small filesystem connectivitity repair fixes"
* tag 'bcachefs-2024-10-05' of git://evilpiepirate.org/bcachefs:
bcachefs: Rework logged op error handling
bcachefs: Add warn param to subvol_get_snapshot, peek_inode
bcachefs: Kill snapshot arg to fsck_write_inode()
bcachefs: Check for unlinked, non-empty dirs in check_inode()
bcachefs: Check for unlinked inodes with dirents
bcachefs: Check for directories with no backpointers
bcachefs: Kill alloc_v4.fragmentation_lru
bcachefs: minor lru fsck fixes
bcachefs: Mark more errors AUTOFIX
bcachefs: Make sure we print error that causes fsck to bail out
bcachefs: bkey errors are only AUTOFIX during read
bcachefs: Create lost+found in correct snapshot
bcachefs: Fix reattach_inode()
bcachefs: Add missing wakeup to bch2_inode_hash_remove()
bcachefs: Fix trans_commit disk accounting revert
bcachefs: Fix bch2_inode_is_open() check
bcachefs: Fix return type of dirent_points_to_inode_nowarn()
bcachefs: Fix bad shift in bch2_read_flag_list()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"Fix Xen config issue introduced in the merge window"
* tag 'for-linus-6.12a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: Fix config option reference in XEN_PRIVCMD definition
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix some ext4 bugs and regressions relating to oneline resize and fast
commits"
* tag 'ext4_for_linus-5.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix off by one issue in alloc_flex_gd()
ext4: mark fc as ineligible using an handle in ext4_xattr_set()
ext4: use handle to mark fc as ineligible in __track_dentry_update()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fix from Ira Weiny:
- Fix calculation for SBDF in error injection
* tag 'cxl-fixes-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
EINJ, CXL: Fix CXL device SBDF calculation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
- Fix potential deadlock during runtime suspend and resume (stm32f7)
* tag 'i2c-for-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: stm32f7: Do not prepare/unprepare clock during runtime suspend/resume
|
