summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-09-30iio: dac: support the ad8460 Waveform DACMariel Tinaco
The AD8460 is a “bits in, power out” high voltage, high-power, high-speed driver optimized for large output current (up to ±1 A) and high slew rate (up to ±1800 V/μs) at high voltage (up to ±40 V) into capacitive loads. A digital engine implements user-configurable features: modes for digital input, programmable supply current, and fault monitoring and programmable protection settings for output current, output voltage, and junction temperature. The AD8460 operates on high voltage dual supplies up to ±55 V and a single low voltage supply of 5 V. Signed-off-by: Mariel Tinaco <Mariel.Tinaco@analog.com> Link: https://patch.msgid.link/20240912095435.18639-3-Mariel.Tinaco@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30dt-bindings: iio: dac: add docs for ad8460Mariel Tinaco
This adds the bindings documentation for the 14-bit High Voltage, High Current, Waveform Generator Digital-to-Analog converter. Signed-off-by: Mariel Tinaco <Mariel.Tinaco@analog.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://patch.msgid.link/20240912095435.18639-2-Mariel.Tinaco@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: light: veml6030: make use of regmap_set_bits()Javier Carrasco
Instead of using regmap_update_bits() and passing val == 1 == VEML6030_ALS_SD, use regmap_set_bits(). Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20240913-veml6035-v1-4-0b09c0c90418@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30dt-bindings: iio: light: veml6030: rename to add manufacturerJavier Carrasco
Follow the common pattern manufacturer,devicename. Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://patch.msgid.link/20240913-veml6035-v1-1-0b09c0c90418@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: imu: kmx61: Drop most likely fake ACPI IDAndy Shevchenko
The commit in question does not proove that ACPI ID exists. Quite likely it was a cargo cult addition while doint that for DT-based enumeration. Drop most likely fake ACPI ID. Googling for KMX61021L gives no useful results in regard to DSDT. Moreover, the official vendor ID in the registry for Kionix is KIOX. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://patch.msgid.link/20240911213110.2893562-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: light: al3010: Fix an error handling path in al3010_probe()Christophe JAILLET
If i2c_smbus_write_byte_data() fails in al3010_init(), al3010_set_pwr(false) is not called. In order to avoid such a situation, move the devm_add_action_or_reset() witch calls al3010_set_pwr(false) right after a successful al3010_set_pwr(true). Fixes: c36b5195ab70 ("iio: light: add Dyna-Image AL3010 driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://patch.msgid.link/ee5d10a2dd2b70f29772d5df33774d3974a80f30.1725993353.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: proximity: vl53l0x-i2c: Added continuous mode supportAbhash Jha
The continuous mode of the sensor is enabled in the buffer_postenable. Replaced the original irq handler with a threaded irq handler to perform i2c reads during continuous mode. The continuous mode is disabled by disabling the buffer. Added a trigger for this device to be used for continuous mode. Signed-off-by: Abhash Jha <abhashkumarjha123@gmail.com> Link: https://patch.msgid.link/20240909101508.263085-3-abhashkumarjha123@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: proximity: vl53l0x-i2c: Added sensor ID checkAbhash Jha
The commit adds a check for the sensor's model ID. We read the model identification register (0xC0) and expect a value of 0xEE. Signed-off-by: Abhash Jha <abhashkumarjha123@gmail.com> Link: https://patch.msgid.link/20240909101508.263085-2-abhashkumarjha123@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: imu: Add i2c driver for bmi270 imuAlex Lanzano
Add initial i2c support for the Bosch BMI270 6-axis IMU. Provides raw read access to acceleration and angle velocity measurements via iio channels. Device configuration requires firmware provided by Bosch and is requested and load from userspace. Signed-off-by: Alex Lanzano <lanzano.alex@gmail.com> Link: https://patch.msgid.link/20240912210749.3080157-3-lanzano.alex@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30dt-bindings: iio: imu: add bmi270 bindingsAlex Lanzano
Add device tree bindings for the bmi270 IMU Signed-off-by: Alex Lanzano <lanzano.alex@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20240912210749.3080157-2-lanzano.alex@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30dt-bindings: iio: temperature: tmp006: document interruptAntoni Pokusinski
TMP006 sensor has a DRDY (data ready) active-low interrupt which indicates that a new measurement is ready to be read. Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://patch.msgid.link/20240908172153.177406-3-apokusinski01@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: temperature: tmp006: add triggered buffer supportAntoni Pokusinski
Add support for continuous data capture using triggered buffers for the tmp006 sensor. The device features a "data ready" interrupt line which is pulled down once a new measurement is ready to be read. Signed-off-by: Antoni Pokusinski <apokusinski01@gmail.com> Link: https://patch.msgid.link/20240908172153.177406-2-apokusinski01@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: adc: ad7173: add support for ad4113Dumitru Ceclan
This commit adds support for the AD4113 ADC. The AD4113 is a low power, low noise, 16-bit, Σ-Δ analog-to-digital converter (ADC) that integrates an analog front end (AFE) for four fully differential or eight single-ended inputs. Reviewed-by: Nuno Sa <nuno.sa@analog.com> Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com> Link: https://patch.msgid.link/20240812-ad4113-v3-3-046e785dd253@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: adc: ad7173: order chipID by valueDumitru Ceclan
The chipIDs defines were supposed to be ordered by value, one was out of order. Fix the order. Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com> Link: https://patch.msgid.link/20240812-ad4113-v3-2-046e785dd253@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30dt-bindings: adc: ad7173: add support for ad4113Dumitru Ceclan
This commit adds bindings support for AD4113. The AD4113 is a low power, low noise, 16-bit, Σ-Δ analog-to-digital converter (ADC) that integrates an analog front end (AFE) for four fully differential or eight single-ended inputs. Added ad4113 to the compatible list and the "avdd2-supply: false" restriction. Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com> Link: https://patch.msgid.link/20240812-ad4113-v3-1-046e785dd253@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: adc: Convert to IIO_MAP()Christophe JAILLET
Use IIO_MAP() instead of hand-writing it. It is much less verbose. The change has been do with the following coccinelle script: @@ identifier STRUCT_NAME; constant NAME, CHANNEL, LABEL; @@ static const struct iio_map STRUCT_NAME[] = { ..., - { - .consumer_dev_name = NAME, - .consumer_channel = CHANNEL, - .adc_channel_label = LABEL, - }, + IIO_MAP(LABEL, NAME, CHANNEL), ... }; @@ identifier STRUCT_NAME; constant NAME, LABEL; @@ static const struct iio_map STRUCT_NAME[] = { ..., - { - .consumer_dev_name = NAME, - .adc_channel_label = LABEL, - }, + IIO_MAP(LABEL, NAME, NULL), ... }; -- Compile tested only Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://patch.msgid.link/48f08224fab5a7595f650dbcef012d7cac3f972b.1725729801.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: adc: Constify struct iio_mapChristophe JAILLET
'struct iio_map' are not modified in these drivers. Constifying this structure moves some data to a read-only section, so increase overall security. In order to do it, the prototype of iio_map_array_register() and devm_iio_map_array_register(), and a few structures that hold a "struct iio_map *" need to be adjusted. On a x86_64, with allmodconfig, as an example: Before: ====== text data bss dec hex filename 21086 760 0 21846 5556 drivers/iio/adc/axp20x_adc.o After: ===== text data bss dec hex filename 21470 360 0 21830 5546 drivers/iio/adc/axp20x_adc.o 33842 1697 384 35923 8c53 drivers/iio/addac/ad74413r.o -- Compile tested only Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://patch.msgid.link/5729dc3cc3892ecf0d8ea28c5f7307b34e27493e.1725729801.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: imu: inv_mpu6050: Use upper_16_bits()/lower_16_bits() helpersAndy Shevchenko
Use upper_16_bits()/lower_16_bits() helpers instead of open-coding them. This is easier to scan quickly compared to bitwise manipulation, and it is pleasingly symmetric. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com> Link: https://patch.msgid.link/20240904184543.1219866-1-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: light: cm32181: Remove duplicate ACPI handle checkAndy Shevchenko
cm32181_acpi_parse_cpm_tables() is a no-op if ACPI handle is not available. Remove duplicate ACPI handle check at the caller side. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240904183646.1219485-1-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: pressure: bmp280: Remove config error check for IIR filter updatesVasileios Amoiridis
When there is a change in the configuration of the BMP3xx device, several steps take place. These steps include: 1) Update the OSR settings and check if there was an update 2) Update the ODR settings and check if there was an update 3) Update the IIR settings and check if there was an update 4) Check if there was an update with the following procedure: a) Set sensor to SLEEP mode and after to NORMAL mode to trigger a new measurement. b) Wait the maximum amount possible depending on the OSR settings c) Check the configuration error register if there was an error during the configuration of the sensor. This check is necessary, because there could be a case where the OSR is too high for the requested ODR so either the ODR needs to be slower or the OSR needs to be less. This is something that is checked internally by the sensor when it runs in NORMAL mode. In the BMP58x devices the previous steps are done internally by the sensor. The IIR filter settings do not depend on the OSR or ODR settings, and there is no need to run a check in case they change. Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20240902184222.24874-4-vassilisamir@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: pressure: bmp280: Add support for bmp280 soft resetVasileios Amoiridis
The BM(P/E)28x devices have an option for soft reset which is also recommended by the Bosch Sensortech BME2 Sensor API to be used before the initial configuration of the device. Link: https://github.com/boschsensortec/BME280_SensorAPI/blob/bme280_v3.5.1/bme280.c#L429 Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20240902184222.24874-3-vassilisamir@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: pressure: bmp280: Use bulk read for humidity calibration dataVasileios Amoiridis
Convert individual reads to a bulk read for the humidity calibration data. Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20240902184222.24874-2-vassilisamir@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: event_monitor: Fix missing free in mainzhang jiao
Free string allocated by asprintf(). Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com> Link: https://patch.msgid.link/20240904080533.104279-1-zhangjiao2@cmss.chinamobile.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: pressure: hid-sensor-press: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-23-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: position: hid-sensor-custom-intel-hinge: Get platform data via ↵Andy Shevchenko
dev_get_platdata() Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-22-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: orientation: hid-sensor-rotation: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-21-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: orientation: hid-sensor-incl-3d: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-20-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: magnetometer: hid-sensor-magn-3d: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-19-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: light: lm3533-als: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Johan Hovold <johan@kernel.org> Link: https://patch.msgid.link/20240902222824.1145571-18-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: light: hid-sensor-prox: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-17-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: light: hid-sensor-als: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-16-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: imu: st_lsm6dsx: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-15-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: gyro: hid-sensor-gyro-3d: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-14-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: frequency: adf4350: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-13-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: frequency: ad9523: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-12-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: dac: max517: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-11-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: dac: m62332: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-10-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: dac: ad5791: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-9-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: dac: ad5504: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-8-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: adc: ltc2497: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. While at it, drop duplicate NULL check that iio_map_array_register() already has. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-7-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: adc: ad7793: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-6-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: adc: ad7887: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-5-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: adc: ad7791: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-4-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: adc: ad7266: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-3-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: accel: hid-sensor-accel-3d: Get platform data via dev_get_platdata()Andy Shevchenko
Access to platform data via dev_get_platdata() getter to make code cleaner. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://patch.msgid.link/20240902222824.1145571-2-andy.shevchenko@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: hid-sensor: Use aligned data type for timestampAndy Shevchenko
Use aligned_s64 for the timestamp field. Note, the actual data is signed, hence with this we also amend that. While at it, drop redundant __alignment directive. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20240903180218.3640501-4-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: imu: st_lsm6dsx: Use aligned data type for timestampAndy Shevchenko
Use aligned_s64 for the timestamp field. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20240903180218.3640501-3-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30types: Complement the aligned types with signed 64-bit oneAndy Shevchenko
Some user may want to use aligned signed 64-bit type. Provide it for them. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20240903180218.3640501-2-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: proximity: sx_common: Drop unused acpi.hAndy Shevchenko
There are drivers that do not need acpi.h, drop unused inclusion. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20240903212922.3731221-4-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: proximity: sx_common: Unexport sx_common_get_raw_register_config()Andy Shevchenko
sx_common_get_raw_register_config() is used in a single driver, move it there. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patch.msgid.link/20240903212922.3731221-3-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 22:55:09 +0000