summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-08-18i40e: Fix static analysis tool warningDave Ertman
This patch fixes a problem where a static analysis tool generates a warning for "INVARIANT_CONDITION: Expression 'enabled_tc' used in the condition always yields the same result." Without this patch, the driver will not pass the static analysis tool checks without generating warnings. This patch fixes the problem by eliminating the irrelevant check and redundant assignment for the value of enabled_tc. Change-ID: Ia7d44cb050f507df7de333e96369d322e08bf408 Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18i40evf: add missing rtnl_lock() around i40evf_set_interrupt_capabilityJacob Keller
The function calls netif_set_real_num_(tx|rx)_queues, both of which should be done only under rntl lock. Unfortunately the i40evf_init_task did not hold the rtnl_lock as necessary. This patch adds the locking needed. Change-ID: Ib72a21c3ce22b71a226b16f9bbe0f5f8cc3e849b Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18i40e: reset RX csum error stat with other pf statsCatherine Sullivan
When we are resetting the pf stats we should also reset the RX csum error stat. Change-ID: I7af5ee0ec81a10f6deee1a7b8c2082ea068ef620 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18i40e/i40evf: Reset VLAN filter count when resettingCatherine Sullivan
When we do a reset, all the VLAN filters get added again. Therefore we also want to reset the VLAN count to 0 or we quickly run out of filters. Change-ID: I459f26851e22204dc8b8999928ad87cde8170119 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18i40e: Fix a bug where a client close can be called before an open is completeAnjali Singhai Jain
The client->open call in this path was not protected with the client instance mutex, and hence the client->close can get initiated before the open completes. Change-Id: I0ed60c38868dd3f44966b6ed49a063d0e5b7edf5 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18i40e: Use list_move instead of list_del/list_addWei Yongjun
Using list_move() instead of list_del() + list_add(). Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18net/mlx5: Add sniffer namespacesMaor Gottlieb
Add sniffer TX and RX namespaces to receive ingoing and outgoing traffic. Each outgoing/incoming packet is duplicated and steered to the sniffer TX/RX namespace in addition to the regular flow. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2016-08-18net/mlx5: Introduce sniffer steering hardware capabilitiesMaor Gottlieb
Define needed hardware capabilities for sniffer RX and TX flow tables. Add the following capabilities: 1. Sniffer RX flow table capabilities. 2. Sniffer TX flow table capabilities. 3. If same TIR can be used by multiple flow tables of different types. Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2016-08-18net/mlx5: Configure IB devices according to LAG stateAviv Heller
When mlx5_ib is loaded, we would like each card's IB devices to be added according to its LAG state (one IB device, instead of two, is to be added if LAG is active). Signed-off-by: Aviv Heller <avivh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2016-08-18net/mlx5: Vport LAG creation supportAviv Heller
Add interfaces for issuing CREATE_VPORT_LAG and DESTROY_VPORT_LAG commands. Used for receiving PF1's eth traffic on PF0's root ft. Signed-off-by: Aviv Heller <avivh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2016-08-18net/mlx5: Add LAG flow steering namespaceAviv Heller
This namespace is used for LAG demux flowtable. The idea is to position the LAG demux ft between bypass and kernel flowtables, allowing raw-eth traffic from both ports to be received by the PF0 IB device. Signed-off-by: Aviv Heller <avivh@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2016-08-18net/mlx5: LAG demux flow table supportAviv Heller
Add interfaces to allow the creation and destruction of a LAG demux flow table. It is a special flow table used during LAG for redirecting non user-mode packets from PF0 to PF1 root ft, if a packet was received on phys port two. Signed-off-by: Aviv Heller <avivh@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2016-08-18net/mlx5: LAG and SRIOV cannot be used togetherAviv Heller
Until support will be added for RoCE LAG SRIOV. Signed-off-by: Aviv Heller <avivh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2016-08-18net/mlx5e: Avoid port remapping of mlx5e netdev TISesAviv Heller
TISes belonging to the mlx5e NIC should not be subject to port remap. Signed-off-by: Aviv Heller <avivh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2016-08-18net/mlx5: Get RoCE netdevAviv Heller
Used by IB driver for determining the IB bond device's netdev, when LAG is active. Returns PF0's netdev if mode is not active-backup, or the PF netdev of the active slave when mode is active-backup. Signed-off-by: Aviv Heller <avivh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2016-08-18net/mlx5: Implement RoCE LAG featureAviv Heller
Available on dual port cards only, this feature keeps track, using netdev LAG events, of the bonding and link status of each port's PF netdev. When both of the card's PF netdevs are enslaved to the same bond/team master, and only them, LAG state is active. During LAG, only one IB device is present for both ports. In addition to the above, this commit includes FW commands used for managing the LAG, new facilities for adding and removing a single device by interface, and port remap functionality according to bond events. Please note that this feature is currently used only for mimicking Ethernet bonding for RoCE - netdevs functionality is not altered, and their bonding continues to be managed solely by bond/team driver. Signed-off-by: Aviv Heller <avivh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2016-08-18net/mlx5: Add HW interfaces used by LAGAviv Heller
Exposed LAG commands enum and layouts: - CREATE_LAG HW enters LAG mode: RoCE traffic from port two is received on PF0 core dev. Allows to set tx_affinity (tx port) for QPs and TISes. Allows to port remap QPs and TISes, overriding their tx_affinity behavior. - MODIFY_LAG Remap QPs and TISes to another port. - QUERY_LAG Query whether LAG mode is active. - DESTROY_LAG HW exits LAG mode, returning to non-LAG behavior. - CREATE_VPORT_LAG Merge Ethernet flow steering, such that traffic received on port two jumps to PF0 root flow table. Available only in LAG mode. - DESTROY_VPORT_LAG Ethernet flow steering returns to non-LAG behavior. Caps added: - lag_master Driver is in charge of managing the LAG. This is currently the only option. - num_lag_ports LAG is supported only if this field's value is 2. Other fields: - QP/TIS tx port affinity During LAG, this field controls on which port a QP or TIS resides. - TIS strict tx affinity When this field is set, the TIS will not be subject to port remap by CREATE_LAG/MODIFY_LAG. - LAG demux flow table Flow table used for redirecting non user-space traffic back to PF1 root flow table, if the packet was received on port two. Signed-off-by: Aviv Heller <avivh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2016-08-18net/mlx5: Separate query_port_proto_oper for IB and ENNoa Osherovich
Replaced mlx5_query_port_proto_oper with separate functions per link type. The functions should take different arguments so no point in trying to unite them. Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2016-08-18net/mlx5: Expose mlx5e_link_modeNoa Osherovich
The mlx5e_link_mode enumeration will also be used in mlx5_ib for RoCE. This patch moves the enumeration to the mlx5 driver port header file. Signed-off-by: Noa Osherovich <noaos@mellanox.com> Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2016-08-18net/mlx5: Update struct mlx5_ifc_xrqc_bitsArtemy Kovalyov
Update struct mlx5_ifc_xrqc_bits according to last specification Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2016-08-18net/mlx5: Modify RQ bitmask from mlx5 ifcAlex Vesker
Use mlx5 ifc MODIFY_BITMASK_VSD in mlx5e_modify_rq_vsd and expose counter set capability bit in hca caps structure. Signed-off-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2016-08-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Minor overlapping changes for both merge conflicts. Resolution work done by Stephen Rothwell was used as a reference. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Buffers powersave frame test is reversed in cfg80211, fix from Felix Fietkau. 2) Remove bogus WARN_ON in openvswitch, from Jarno Rajahalme. 3) Fix some tg3 ethtool logic bugs, and one that would cause no interrupts to be generated when rx-coalescing is set to 0. From Satish Baddipadige and Siva Reddy Kallam. 4) QLCNIC mailbox corruption and napi budget handling fix from Manish Chopra. 5) Fix fib_trie logic when walking the trie during /proc/net/route output than can access a stale node pointer. From David Forster. 6) Several sctp_diag fixes from Phil Sutter. 7) PAUSE frame handling fixes in mlxsw driver from Ido Schimmel. 8) Checksum fixup fixes in bpf from Daniel Borkmann. 9) Memork leaks in nfnetlink, from Liping Zhang. 10) Use after free in rxrpc, from David Howells. 11) Use after free in new skb_array code of macvtap driver, from Jason Wang. 12) Calipso resource leak, from Colin Ian King. 13) mediatek bug fixes (missing stats sync init, etc.) from Sean Wang. 14) Fix bpf non-linear packet write helpers, from Daniel Borkmann. 15) Fix lockdep splats in macsec, from Sabrina Dubroca. 16) hv_netvsc bug fixes from Vitaly Kuznetsov, mostly to do with VF handling. 17) Various tc-action bug fixes, from CONG Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits) net_sched: allow flushing tc police actions net_sched: unify the init logic for act_police net_sched: convert tcf_exts from list to pointer array net_sched: move tc offload macros to pkt_cls.h net_sched: fix a typo in tc_for_each_action() net_sched: remove an unnecessary list_del() net_sched: remove the leftover cleanup_a() mlxsw: spectrum: Allow packets to be trapped from any PG mlxsw: spectrum: Unmap 802.1Q FID before destroying it mlxsw: spectrum: Add missing rollbacks in error path mlxsw: reg: Fix missing op field fill-up mlxsw: spectrum: Trap loop-backed packets mlxsw: spectrum: Add missing packet traps mlxsw: spectrum: Mark port as active before registering it mlxsw: spectrum: Create PVID vPort before registering netdevice mlxsw: spectrum: Remove redundant errors from the code mlxsw: spectrum: Don't return upon error in removal path i40e: check for and deal with non-contiguous TCs ixgbe: Re-enable ability to toggle VLAN filtering ixgbe: Force VLNCTRL.VFE to be set in all VMDq paths ...
2016-08-17Merge branch 'strparser'David S. Miller
Tom Herbert says: ==================== strp: Stream parser for messages This patch set introduces a utility for parsing application layer protocol messages in a TCP stream. This is a generalization of the mechanism implemented of Kernel Connection Multiplexor. This patch set adapts KCM to use the strparser. We expect that kTLS can use this mechanism also. RDS would probably be another candidate to use a common stream parsing mechanism. The API includes a context structure, a set of callbacks, utility functions, and a data ready function. The callbacks include a parse_msg function that is called to perform parsing (e.g. BPF parsing in case of KCM), and a rcv_msg function that is called when a full message has been completed. For strparser we specify the return codes from the parser to allow the backend to indicate that control of the socket should be transferred back to userspace to handle some exceptions in the stream: The return values are: >0 : indicates length of successfully parsed message 0 : indicates more data must be received to parse the message -ESTRPIPE : current message should not be processed by the kernel, return control of the socket to userspace which can proceed to read the messages itself other < 0 : Error is parsing, give control back to userspace assuming that synchronization is lost and the stream is unrecoverable (application expected to close TCP socket) There is one issue I haven't been able to fully resolve. If parse_msg returns ESTRPIPE (wants control back to userspace) the parser may already have consumed some bytes of the message. There is no way to put bytes back into the TCP receive queue and tcp_read_sock does not allow an easy way to peek messages. In lieu of a better solution, we return ENODATA on the socket to indicate that the data stream is unrecoverable (application needs to close socket). This condition should only happen if an application layer message header is split across two skbuffs and parsing just the first skbuff wasn't sufficient to determine the that transfer to userspace is needed. This patch set contains: - strparser implementation - changes to kcm to use strparser - strparser.txt documentation v2: - Add copyright notice to C files - Remove GPL module license from strparser.c - Add report of rxpause v3: - Restore GPL module license - Use EXPORT_SYMBOL_GPL v4: - Removed unused function, changed another to be static as suggested by davem - Rewoked data_ready to be called from upper layer, no longer requires taking over socket data_ready callback as suggested by Lance Chao Tested: - Ran a KCM thrash test for 24 hours. No behavioral or performance differences observed. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17strparser: DocumentationTom Herbert
Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17kcm: Use stream parserTom Herbert
Adapt KCM to use the stream parser. This mostly involves removing the RX handling and setting up the strparser using the interface. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17strparser: Stream parser for messagesTom Herbert
This patch introduces a utility for parsing application layer protocol messages in a TCP stream. This is a generalization of the mechanism implemented of Kernel Connection Multiplexor. The API includes a context structure, a set of callbacks, utility functions, and a data ready function. A stream parser instance is defined by a strparse structure that is bound to a TCP socket. The function to initialize the structure is: int strp_init(struct strparser *strp, struct sock *csk, struct strp_callbacks *cb); csk is the TCP socket being bound to and cb are the parser callbacks. The upper layer calls strp_tcp_data_ready when data is ready on the lower socket for strparser to process. This should be called from a data_ready callback that is set on the socket: void strp_tcp_data_ready(struct strparser *strp); A parser is bound to a TCP socket by setting data_ready function to strp_tcp_data_ready so that all receive indications on the socket go through the parser. This is assumes that sk_user_data is set to the strparser structure. There are four callbacks. - parse_msg is called to parse the message (returns length or error). - rcv_msg is called when a complete message has been received - read_sock_done is called when data_ready function exits - abort_parser is called to abort the parser The input to parse_msg is an skbuff which contains next message under construction. The backend processing of parse_msg will parse the application layer protocol headers to determine the length of the message in the stream. The possible return values are: >0 : indicates length of successfully parsed message 0 : indicates more data must be received to parse the message -ESTRPIPE : current message should not be processed by the kernel, return control of the socket to userspace which can proceed to read the messages itself other < 0 : Error is parsing, give control back to userspace assuming that synchronzation is lost and the stream is unrecoverable (application expected to close TCP socket) In the case of error return (< 0) strparse will stop the parser and report and error to userspace. The application must deal with the error. To handle the error the strparser is unbound from the TCP socket. If the error indicates that the stream TCP socket is at recoverable point (ESTRPIPE) then the application can read the TCP socket to process the stream. Once the application has dealt with the exceptions in the stream, it may again bind the socket to a strparser to continue data operations. Note that ENODATA may be returned to the application. In this case parse_msg returned -ESTRPIPE, however strparser was unable to maintain synchronization of the stream (i.e. some of the message in question was already read by the parser). strp_pause and strp_unpause are used to provide flow control. For instance, if rcv_msg is called but the upper layer can't immediately consume the message it can hold the message and pause strparser. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17net: ipconfig: Fix more use after freeThierry Reding
While commit 9c706a49d660 ("net: ipconfig: fix use after free") avoids the use after free, the resulting code still ends up calling both the ic_setup_if() and ic_setup_routes() after calling ic_close_devs(), and access to the device is still required. Move the call to ic_close_devs() to the very end of the function. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17Merge branch 'tc_action-fixes'David S. Miller
Cong Wang says: ==================== net_sched: tc action fixes and updates This patchset fixes a few regressions caused by the previous code refactor and more. Thanks to Jamal for catching them! Note, patch 3/7 and 4/7 are not strictly necessary for this patchset, I just want to carry them together. --- v4: adjust an indention for Jamal add two more patches v3: avoid list for fast path, suggested by Jamal v2: replace flex_array with regular dynamic array keep tcf_action_stats_update() in act_api.h fix macro typos found by Amir ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17net_sched: allow flushing tc police actionsRoman Mashak
The act_police uses its own code to walk the action hashtable, which leads to that we could not flush standalone tc police actions, so just switch to tcf_generic_walker() like other actions. (Joint work from Roman and Cong.) Signed-off-by: Roman Mashak <mrv@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17net_sched: unify the init logic for act_policeWANG Cong
Jamal reported a crash when we create a police action with a specific index, this is because the init logic is not correct, we should always create one for this case. Just unify the logic with other tc actions. Fixes: a03e6fe56971 ("act_police: fix a crash during removal") Reported-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17net_sched: convert tcf_exts from list to pointer arrayWANG Cong
As pointed out by Jamal, an action could be shared by multiple filters, so we can't use list to chain them any more after we get rid of the original tc_action. Instead, we could just save pointers to these actions in tcf_exts, since they are refcount'ed, so convert the list to an array of pointers. The "ugly" part is the action API still accepts list as a parameter, I just introduce a helper function to convert the array of pointers to a list, instead of relying on the C99 feature to iterate the array. Fixes: a85a970af265 ("net_sched: move tc_action into tcf_common") Reported-by: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17net_sched: move tc offload macros to pkt_cls.hWANG Cong
struct tcf_exts belongs to filters, should not be visible to plain tc actions. Cc: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17net_sched: fix a typo in tc_for_each_action()WANG Cong
It is harmless because all users pass 'a' to this macro. Fixes: 00175aec941e ("net/sched: Macro instead of CONFIG_NET_CLS_ACT ifdef") Cc: Amir Vadai <amir@vadai.me> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17net_sched: remove an unnecessary list_del()WANG Cong
This list_del() for tc action is not needed actually, because we only use this list to chain bulk operations, therefore should not be carried for latter operations. Fixes: ec0595cc4495 ("net_sched: get rid of struct tcf_common") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17net_sched: remove the leftover cleanup_a()WANG Cong
After refactoring tc_action into tcf_common, we no longer need to cleanup temporary "actions" in list, they are permanently stored in the hashtable. Fixes: a85a970af265 ("net_sched: move tc_action into tcf_common") Reported-by: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17Merge tag 'batadv-next-for-davem-20160816' of ↵David S. Miller
git://git.open-mesh.org/linux-merge Simon Wunderlich says: ==================== pull request for net-next: batman-adv 2016-08-16 This feature patchset is all about adding netlink support, which should supersede our debugfs configuration interface in the long run. It is especially necessary when batman-adv should be used in different namespaces, since debugfs can not differentiate between those. More specifically, the following changes are included: - Two fixes for namespace handling by Andrew Lunn, checking also the namespaces for parent interfaces, and supress debugfs entries for non-default netns - Implement various netlink commands for the new interface, by Matthias Schiffer, Andrew Lunn, Sven Eckelmann and Simon Wunderlich (13 patches): * routing algorithm list * hardif list * translation tables (local and global) * TTVN for the translation tables * originator and neighbor tables for B.A.T.M.A.N. IV and B.A.T.M.A.N. V * gateway dump functionality for B.A.T.M.A.N. IV and B.A.T.M.A.N. V * Bridge Loop Avoidance claims, and corresponding BLA group * Bridge Loop Avoidance backbone tables - Finally, mark batman-adv as netns compatible, by Andrew Lunn (1 patch) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17Merge branch '1GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2016-08-16 This series contains fixes to e1000e, igb, ixgbe and i40e. Kshitiz Gupta provides a fix for igb to resolve the PHY delay compensation math in several functions. Jarod Wilson provides a fix for e1000e which had to broken up into 2 patches, first is prepares the driver for expanding the list of NICs that have occasional ~10 hour clock jumps when being used for PTP. Second patch actually fixes i218 silicon which has been experiencing the clock jumps while using PTP. Alex provides 2 patches for ixgbe now that he is back at Intel. First fixes setting VLNCTRL.VFE bit, which was left unchanged in earlier patches which resulted in disabling VLAN filtering for all the VFs. Second corrects the support for disabling the VLAN tag filtering via the feature bit. Lastly, David fixes i40e which was causing a kernel panic when non-contiguous traffic classes or traffic classes not starting with TC0, were configured on a link partner switch. To fix this, changed the logic when determining the total number of TCs enabled. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17Merge branch 'mlxsw-fixes'David S. Miller
Jiri Pirko says: ==================== mlxsw: IPv4 UC router fixes Ido says: Patches 1-3 fix a long standing problem in the driver's init sequence, which manifests itself quite often when routing daemons try to configure an IP address on registered netdevs that don't yet have an associated vPort. Patches 4-9 add missing packet traps for the router to work properly and also fix ordering issue following the recent changes to the driver's init sequence. The last patch isn't related to the router, but fixes a general problem in which under certain conditions packets aren't trapped to CPU. v1->v2: - Change order of patch 7 - Add patch 6 following Ilan's comment - Add patchset name and cover letter ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17mlxsw: spectrum: Allow packets to be trapped from any PGIdo Schimmel
When packets enter the device they are classified to a priority group (PG) buffer based on their PCP value. After their egress port and traffic class are determined they are moved to the switch's shared buffer and await transmission, if: (Ingress{Port}.Usage < Thres && Ingress{Port,PG}.Usage < Thres && Egress{Port}.Usage < Thres && Egress{Port,TC}.Usage < Thres) || (Ingress{Port}.Usage < Min || Ingress{Port,PG} < Min || Egress{Port}.Usage < Min || Egress{Port,TC}.Usage < Min) Packets scheduled to transmission through CPU port (trapped to CPU) use traffic class 7, which has a zero maximum and minimum quotas. However, when such packets arrive from PG 0 they are admitted to the shared buffer as PG 0 has a non-zero minimum quota. Allow all packets to be trapped to the CPU - regardless of the PG they were classified to - by assigning a 10KB minimum quota for CPU port and TC7. Fixes: 8e8dfe9fdf06 ("mlxsw: spectrum: Add IEEE 802.1Qaz ETS support") Reported-by: Tamir Winetroub <tamirw@mellanox.com> Tested-by: Tamir Winetroub <tamirw@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17mlxsw: spectrum: Unmap 802.1Q FID before destroying itIdo Schimmel
Before destroying the 802.1Q FID we should first remove the VID-to-FID mapping. This makes mlxsw_sp_fid_destroy() symmetric with regards to mlxsw_sp_fid_create(). Fixes: 14d39461b3f4 ("mlxsw: spectrum: Use per-FID struct for the VLAN-aware bridge") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17mlxsw: spectrum: Add missing rollbacks in error pathIdo Schimmel
While going over the code I noticed we are missing two rollbacks in the port's creation error path. Add them and adjust the place of one of them in the port's removal sequence so that both are symmetric. Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17mlxsw: reg: Fix missing op field fill-upJiri Pirko
Ralue pack function needs to set op, otherwise it is 0 for add always. Fixes: d5a1c749d22 ("mlxsw: reg: Add Router Algorithmic LPM Unicast Entry Register definition") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17mlxsw: spectrum: Trap loop-backed packetsIdo Schimmel
One of the conditions to generate an ICMP Redirect Message is that "the packet is being forwarded out the same physical interface that it was received from" (RFC 1812). Therefore, we need to be able to trap such packets and let the kernel decide what to do with them. For each RIF, enable the loop-back filter, which will raise the LBERROR trap whenever the ingress RIF equals the egress RIF. Fixes: 99724c18fc66 ("mlxsw: spectrum: Introduce support for router interfaces") Reported-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17mlxsw: spectrum: Add missing packet trapsElad Raz
Add the following traps: 1) MTU Error: Trap packets whose size is bigger than the egress RIF's MTU. If DF bit isn't set, traffic will continue to be routed in slow path. 2) TTL Error: Trap packets whose TTL expired. This allows traceroute to work properly. 3) OSPF packets. Fixes: 7b27ce7bb9cd ("mlxsw: spectrum: Add traps needed for router implementation") Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17mlxsw: spectrum: Mark port as active before registering itIdo Schimmel
Commit bbf2a4757b30 ("mlxsw: spectrum: Initialize ports at the end of init sequence") moved ports initialization to the end of the init sequence, which means ports are the first to be removed during fini. Since the FDB delayed work is still active when ports are removed it's possible for it to process FDB notifications of inactive ports, resulting in a warning message. Fix that by marking ports as inactive only after unregistering them. The NETDEV_UNREGISTER event will invoke bridge's driver port removal sequence that will cause the FDB (and FDB notifications) to be flushed. Fixes: bbf2a4757b30 ("mlxsw: spectrum: Initialize ports at the end of init sequence") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17mlxsw: spectrum: Create PVID vPort before registering netdeviceIdo Schimmel
After registering a netdevice it's possible for user space applications to configure an IP address on it. From the driver's perspective, this means a router interface (RIF) should be created for the PVID vPort. Therefore, we must create the PVID vPort before registering the netdevice. Fixes: 99724c18fc66 ("mlxsw: spectrum: Introduce support for router interfaces") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17mlxsw: spectrum: Remove redundant errors from the codeIdo Schimmel
Currently, when device configuration fails we emit errors to the kernel log despite the fact we already get these from the EMAD transaction layer, so remove them. In addition to being unnecessary, removing these error messages will allow us to reuse mlxsw_sp_port_add_vid() to create the PVID vPort before registering the netdevice. Fixes: 99724c18fc66 ("mlxsw: spectrum: Introduce support for router interfaces") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17mlxsw: spectrum: Don't return upon error in removal pathIdo Schimmel
When removing a VLAN filter from the device we shouldn't return upon the first error we encounter, as otherwise we'll have resources that will never be freed nor used. Instead, we should keep trying to free as much resources as possible in a best effort mode. Remove the error message as well, since we already get these from the EMAD transaction code. Fixes: 99724c18fc66 ("mlxsw: spectrum: Introduce support for router interfaces") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-17Merge tag 'for-v4.8-rc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply Pull power supply fixes from Sebastian Reichel. * tag 'for-v4.8-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: power_supply: tps65217-charger: fix missing platform_set_drvdata() power: reset: hisi-reboot: Unmap region obtained by of_iomap power: reset: reboot-mode: fix build error of missing ioremap/iounmap on UM power: supply: max17042_battery: fix model download bug.
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 07:01:50 +0000