summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-11-17mwifiex: do not explicitly disable TDLS link during teardownAvinash Patil
When Teardown event from FW is indicated to userspace, userspace would trigger tdls_oper handler to disable TDLS link. We need not do this explicitly here. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-17mwifiex: update rx packet descriptor structure to match FWAvinash Patil
RX packet descriptor structure has recently changed in FW. This patch updates rxpd accordingly. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-17ath9k: fix the assignment of hw queues for mesh interfaceChun-Yeow Yeoh
We need to assign the hw queues for mesh interface. Otherwise, we are not able to bring up the mesh interface due to the IEEE80211_INVAL_HW_QUEUE error. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-17ath9k: common-spectral: don't depend from ATH9K_DEBUGFSOleksij Rempel
we can have here two variants. Add ATH9K_CMN_DEBUGFS y if ATH9K_CMN_DEBUGFS || ATH9K_HTC_DEBUGFS wich will add more configurations and testcases. Or remove ATH9K_HTC_DEBUGFS which need more time to be done. So, make common-spectral ignore ATH9K_DEBUGFS option for now. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-17ath9k_htc: ath9k_htc_op_ps_wakeup() can be statickbuild test robot
drivers/net/wireless/ath/ath9k/htc_drv_init.c:56:6: sparse: symbol 'ath9k_htc_op_ps_wakeup' was not declared. Should it be static? drivers/net/wireless/ath/ath9k/htc_drv_init.c:61:6: sparse: symbol 'ath9k_htc_op_ps_restore' was not declared. Should it be static? drivers/net/wireless/ath/ath9k/htc_drv_init.c:66:19: sparse: symbol 'ath9k_htc_ps_ops' was not declared. Should it be static? Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-17ath9k: ath9k_op_ps_wakeup() can be statickbuild test robot
drivers/net/wireless/ath/ath9k/init.c:91:6: sparse: symbol 'ath9k_op_ps_wakeup' was not declared. Should it be static? drivers/net/wireless/ath/ath9k/init.c:96:6: sparse: symbol 'ath9k_op_ps_restore' was not declared. Should it be static? drivers/net/wireless/ath/ath9k/init.c:101:19: sparse: symbol 'ath9k_ps_ops' was not declared. Should it be static? Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-17mwifiex: module load parameter for interface creationAvinash Patil
This patch adds module load parameter driver_mode for mwifiex which would enable driver to create AP or P2P client interface while loading module. driver_mode is bitmap of interface modes for station, AP and P2P client. Station interface is created by default and is unaffected by driver_mode parameter. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-17ath9k: fix misc debugfs when not using chan contextBen Greear
When channel-context is not enabled, all vifs belong to the first context, but it is not configured as 'assigned'. Fix misc debugfs file to print out info for non-assigned contexts, and also print whether ctx is assigned or not. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-17Merge branch 'for-linville' of git://github.com/kvalo/athJohn W. Linville
Kalle Valo <kvalo@qca.qualcomm.com> says: "One ath6kl patch and rest for ath10k, but nothing really major which stands out. Most notable: o fix resume (Bartosz) o firmware restart is now faster and more reliable (Michal) o it's now possible to test hardware restart functionality without crashing the firmware using hw-restart parameter with simulate_fw_crash debugfs file (Michal)" Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-17ath10k: fix mismatched wmi api callPeter Oh
Fix to use v10.2 wmi call for firmware v10.2. It turned out that peer association function was using v10.1 wmi call for v10.2 firmware during code review. Signed-off-by: Peter Oh <poh@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-11-17ath10k: advertise support for AP mode channel width changesRajkumar Manoharan
This will enable AP mode to change channel width dynamically based on 20/40 intolerance report sent by associated client. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-11-17ath10k: add modpram 'skip_otp' to ignore empty otp error during BMIRajkumar Manoharan
This patch would help bring up wifi interface with default board data in case of failures in otp download. It is useful for initial calibration. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-11-17ath10k: handle ieee80211 header and payload tracing separatelyRajkumar Manoharan
For packet log, the transmitted frame 802.11 header alone is sufficient. Recording entire packet is also consuming lot of disk space. To optimize this, tx and rx data tracepoints are splitted into header and payload tracepoints. To record tx ieee80211 headers trace-cmd record -e ath10k_tx_hdr To record complete packets trace-cmd record -e ath10k_tx_hdr -e ath10k_tx_payload Cc: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-11-11ath9k_htc: remove return of value in empty definintion of ath9k_htc_deinit_debugJohn W. Linville
Cc: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11mwifiex: simplify ad hoc join capability infoJames Cameron
While preparing an ad-hoc start command, the capability info bitmap is needlessly set from the command, and then the ESS bit cleared. Change to set the bitmap directly without reference to the command. Signed-off-by: James Cameron <quozl@laptop.org> Acked-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11wlcore: make wlcore_cmd_send_failsafe() staticLuciano Coelho
The wlcore_cmd_send_failsafe() function is only called in the cmd.c file, where it is definde. Make it static. Additionally, move the EXPORT_SYMBOL macro for wl1271_cmd_send() to the right place. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11wlcore: check minimum buffer size in some cmd_send functionsLuciano Coelho
Check for the minimum required buffer length in wlcore_cmd_send() and wlcore_cmd_configure_failsafe. This ensures that we will never try to use a buffer that is smaller than the required header. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11mwifiex: fix version display problem on big endian platformsAmitkumar Karwar
It's been observed that wrong firmware version (ex. 66.14.96.p9 instead of 14.66.9.p96) is displayed on big endian platforms. The problem is fixed here. Reported-by: Daniel Mosquera <daniel.mosquera@ctag.com> Tested-by: Daniel Mosquera <daniel.mosquera@ctag.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11ath9k_htc: add spectral scan debug interfaceOleksij Rempel
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11ath9k_htc: process rx spectral packetsOleksij Rempel
use code provided by Ashish Patro <patro@cs.wisc.edu> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11ath9k_htc: trigger spectral scan on set_channelOleksij Rempel
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11ath9k_htc: set initial spec_config valuesOleksij Rempel
use values provided by Ashish Patro <patro@cs.wisc.edu> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11ath9k_htc: add struct ath_spec_scan_priv to ath9k_htc_privOleksij Rempel
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11ath9k_htc: add ath_ps_ops bindingsOleksij Rempel
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11ath9k_htc: fix rs_datalen conversationOleksij Rempel
For some reason it didn't coused obvious problems. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11ath9k: For AR9271 chipsets, set count = 0 for endless samples.Oleksij Rempel
not sure why. Initially provided by Ashish Patro <patro@cs.wisc.edu> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11ath9k: move spectral.* to common-spectral.*Oleksij Rempel
and rename exports from ath9k_spectral_* to ath9k_cmn_spectral_* Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11ath9k: move ath9k_spectral_scan_ from main.c to spectral.cOleksij Rempel
Now we should be ready to make this code common. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11ath9k: make ath9k_spectral_scan_ do not depend on ath_softcOleksij Rempel
last preparation before moving ath9k_spectral_scan_ to spectral.c Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11ath9k: use ath_common instead of ieee80211_hw in ath9k_spectral_scan_Oleksij Rempel
we don't have here any ieee80211_hw dependencies any way. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11ath9k: use ath_ps_ops in ath9k_spectral_scan_Oleksij Rempel
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11ath9k: add ath_ps_ops bindingsOleksij Rempel
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11ath: add struct ath_ps_opsOleksij Rempel
we will need it to make common code Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11ath9k: remove all struct ath_softc dependencies from spectral codeOleksij Rempel
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11ath9k: add ath_hw to ath_spec_scan_privOleksij Rempel
spectral code mostly depends on ath_hw, not on ath_softc Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11ath9k: use struct dentry by ath9k_spectral_init_debugOleksij Rempel
this will alow us to make ath_softc independent code. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11ath9k: move spec_config to ath_spec_scan_privOleksij Rempel
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11ath9k: move spectral_mode to ath_spec_scan_privOleksij Rempel
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11ath9k: add struct ath_spec_scan_privOleksij Rempel
and move rfs_chan_spec_scan to this struct. We will need it for common spectral scan code. Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11mwifiex: fix warning while starting BSSAvinash Patil
We see this warning while starting mwifiex AP: Unsupported RX-STBC, default to 2x2 This was happening because of wrong offset while copying HT capabilities from BSS configuration of start_ap handler. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11mwifiex: do not setup AMPDU/AMSDU with broadcast receiverAvinash Patil
It is observed that device sometimes sends BA setup requests for broadcast mac address. This patch adds a check to avoid checking availability of AMPDU/AMSDU streams for broadcast mac address. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11mwifiex: fix out of memory issue observed for USB chipsetsAmitkumar Karwar
On some platforms, system goes out of memory during heavy Rx traffic with our USB chipsets. In case of SDIO/PCIe, after receiving 50 packets in Rx queue we stop processing interrupts till packets pending fall below low threshold i.e 20. We don't have similar logic for USB, so if host platform is slow, we would hit a case where firmware keeps on pushing packets at high speed than driver/kernel can process. We will stop submitting URBs for Rx data when pending packet count reaches high threshold and restart them when enough packets are consumed to solve the problem. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=85071 Reported-by: Marek Belisko <marek.belisko@gmail.com> Tested-by: Marek Belisko <marek.belisko@gmail.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11mwifiex: remove data_complete handlerAvinash Patil
This patch removes redundant data complete handler. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11mwifiex: rx workqueue support for USB interfaceAvinash Patil
This patch adds RX workqueue support for USB interfaces. Currently rx_pending is applicable for cmd/events and Rx data in USB interface. Let's use it only for Rx data. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11ath9k: add support for reporting tx power to mac80211Felix Fietkau
Track it per channel context instead of in the softc Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11bcma: get IRQ numbers from dtHauke Mehrtens
It is not possible to auto detect the irq numbers used by the cores on an arm SoC. If bcma was registered with device tree it will search for some device tree nodes with the irq number and add it to the core configuration. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11bcma: make it possible to specify a IRQ num in bcma_core_irq()Hauke Mehrtens
This moves bcma_core_irq() to main.c and add a extra parameter with a number so that we can return different irq number for devices with more than one. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-11-11Merge branch 'for-upstream' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
2014-11-11mac80211: refactor duplicate detectionJohannes Berg
Put duplicate detection into its own RX handler, and separate out the conditions a bit to make the code more readable. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-10cfg80211: introduce regulatory flags controlling bwArik Nemtsov
Allow setting bandwidth related regulatory flags. These flags are mapped to the corresponding channel flags in the specified range. Make sure the new flags are consulted when calculating the maximum bandwidth allowed by a regulatory-rule. Also allow propagating the GO_CONCURRENT modifier from a reg-rule to a channel. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 10:16:10 +0000