Age | Commit message (Collapse) | Author |
|
[Why]
There are some pipe scaler validation failure when the pipe is phantom
and causes crash in DML validation. Since, scalar parameters are not
as important in phantom pipe and we require this plane to do successful
MCLK switches, the failure condition can be ignored.
[How]
Ignore scalar validation failure if the pipe validation is marked as
phantom pipe.
Cc: stable@vger.kernel.org # 6.11+
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
No check on head pipe during the dml to dc hw mapping will allow illegal
pipe usage. This will result in a wrong pipe topology to cause mpcc tree
totally mess up then cause a display hang.
[How]
Avoid to use the pipe is head in all check and avoid ODM slice during
preferred pipe check.
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Yihan Zhu <Yihan.Zhu@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Since is_dsc_possible is already checked just above, there's no need to
check it again before filling out the DSC settings.
Signed-off-by: Bhavin Sharma <bhavin.sharma@siliconsignals.io>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The check for tools_size being non-zero is redundant as tools_size is
explicitly set to a non-zero value (0x19000). Removing the if condition
simplifies the code without altering functionality.
Signed-off-by: Bhavin Sharma <bhavin.sharma@siliconsignals.io>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
These were missed before.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3751
Signed-off-by: Umio Yasuno <coelacanth_dream@protonmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Since ttm_bo_move_null() is exactly the same as ttm_resource_free() +
ttm_bo_assign_mem(), we use ttm_bo_move_null() for the GTT --> SYSTEM
move case too. Then the code is more consistent as the SYSTEM --> GTT
move case.
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Get XGMI_v_6_4_0 link status and populate it to metrics v1_7 for
SMU_v_13_0_6
v2: Get link status register value for each soc from separate
function (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add new gpu_metrics_v1_7 to acquire xgmi link status,
application counter and max vram bandwidth
v2: Use gpu_metrics_v1_7 for SMU_v_13_0_6 (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update member's data type in amdgpu_xcp_metrics from linux specific
to the ones compatible to uapi interface
Fixes: 4c07ff7d07f7 ("drm/amd/pm: Add gpu_metrics_v1_6")
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Driver Changes:
- Fix a NULL pointer deref (Everest K.C.)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZzcsMT_FEqBE0cAW@fedora
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.13-2024-11-15:
amdgpu:
- Parition fixes
- GFX 12 fixes
- SR-IOV fixes
- MES fixes
- RAS fixes
- GC queue handling fixes
- VCN fixes
- Add sysfs reset masks
- Better error messages for P2P failurs
- SMU fixes
- Documentation updates
- GFX11 enforce isolation updates
- Display HPD fixes
- PSR fixes
- Panel replay fixes
- DP MST fixes
- USB4 fixes
- Misc display fixes and cleanups
- VRAM handling fix for APUs
- NBIO fix
amdkfd:
- INIT_WORK fix
- Refcount fix
- KFD MES scheduling fixes
drm/fourcc:
- Add missing tiling mode
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241115165012.573465-1-alexander.deucher@amd.com
|
|
The pointer list->list is dereferenced before the NULL check.
Fix this by moving the NULL check outside the for loop, so that
the check is performed before the dereferencing.
The list->list pointer cannot be NULL so this has no effect on runtime.
It's just a correctness issue.
This issue was reported by Coverity Scan.
https://scan7.scan.coverity.com/#/project-view/51525/11354?selectedIssue=1600335
Fixes: 0f1fdf559225 ("drm/xe/guc: Save manual engine capture into capture list")
Signed-off-by: Everest K.C. <everestkc@everestkc.com.np>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241023233356.5479-1-everestkc@everestkc.com.np
(cherry picked from commit 2aff81e039de5b0b7ef6bdcb2c320f121f69e2b4)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
There is a strapping issue on NBIO 7.7.0 that can lead to spurious PME
events while in the D0 state.
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20241112161142.28974-1-mario.limonciello@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This reverts commit 2551b4a321a68134360b860113dd460133e856e5.
This was not the root cause. Revert.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3678
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: aurabindo.pillai@amd.com
Cc: hamishclaxton@gmail.com
|
|
The static declaration causes the check to fail. Remove it.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3678
Fixes: 00c391102abc ("drm/amd/display: Add misc DC changes for DCN401")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamish Claxton <hamishclaxton@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: aurabindo.pillai@amd.com
Cc: hamishclaxton@gmail.com
|
|
That is just a waste of time on APUs.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3704
Fixes: 216c1282dde3 ("drm/amdgpu: use GTT only as fallback for VRAM|GTT")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This is for MES to limit only one process for the user queues
Signed-off-by: Shaoyun Liu <shaoyun.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This is used when radeonsi export small texture's modifier
to user with eglExportDMABUFImageQueryMESA().
mesa changes is available here:
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/31658
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Qiang Yu <qiang.yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Correct kiq unmap queue timeout value.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add vcn and jpeg error count parsing.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
New features require the new fields defines
Signed-off-by: Shaoyun Liu <shaoyun.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add back kfd queues in start scheduling that originally been
removed on stop scheduling.
Signed-off-by: Shaoyun Liu <shaoyun.liu@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
kfd process kref count(process->ref) is initialized to 1 by kref_init. After
it is created not need to increase its kref. Instad add kfd process kref at kfd
process mmu notifier allocation since we already decrease the kref at
free_notifier of mmu_notifier_ops, so pair them.
When user process opens kfd node multiple times the kfd process kref is
increased each time to balance with kfd node close operation.
Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Improves the coding style by updating bit-shift
operations in the amdgpu_jpeg.c driver file.
It ensures consistency and avoids potential issues
by explicitly using 1U and 1ULL for unsigned
and unsigned long long shifts in all relevant instances.
Signed-off-by: Advait Dhamorikar <advaitdhamorikar@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
MES internal scratch data is useful for mes debug, it can only located
in VRAM, change the allocation type and increase size for mes 11
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Acked-by: Feifei Xu <Feifei.Xu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable RAS late init if VF RAS Telemetry is supported.
When enabled, the VF can use this interface to query total
RAS error counts from the host.
The VF FB access may abruptly end due to a fatal error,
therefore the VF must cache and sanitize the input.
The Host allows 15 Telemetry messages every 60 seconds, afterwhich
the host will ignore any more in-coming telemetry messages. The VF will
rate limit its msg calling to once every 5 seconds (12 times in 60 seconds).
While the VF is rate limited, it will continue to report the last
good cached data.
v2: Flip generate report & update statistics order for VF
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Acked-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If VF RAS Capability support is enabled, guest is able to
retrieve the real RAS support from the host.
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add message handlers for RAS telemetry.
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The SRIOV PF/VF Data exchange is extended by 64KB for VF RAS Telemetry data.
Add Host RAS Telemetry enable capabilities bitfields.
Add a new VF msg REQ_RAS_ERROR_COUNT, the host response data will be populated
in the RAS Telemetry region.
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This version brings along the following:
- DML2 fixes
- DP fixes
- DPMS fix
- HPD fixes
- Misc cleanup
- ODM fix
- Replay fix
- SPL fix
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
At some point, the IEEE ID identification for the replay check in the
AMD EDID was added. However, this check causes the following
out-of-bounds issues when using KASAN:
[ 27.804016] BUG: KASAN: slab-out-of-bounds in amdgpu_dm_update_freesync_caps+0xefa/0x17a0 [amdgpu]
[ 27.804788] Read of size 1 at addr ffff8881647fdb00 by task systemd-udevd/383
...
[ 27.821207] Memory state around the buggy address:
[ 27.821215] ffff8881647fda00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 27.821224] ffff8881647fda80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 27.821234] >ffff8881647fdb00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 27.821243] ^
[ 27.821250] ffff8881647fdb80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 27.821259] ffff8881647fdc00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 27.821268] ==================================================================
This is caused because the ID extraction happens outside of the range of
the edid lenght. This commit addresses this issue by considering the
amd_vsdb_block size.
Cc: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This commit removes a legacy debug_defaults_diags struct.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If the nominal VBlank is too small, optimizing for stutter can cause
the prefetch bandwidth to increase drasticaly, resulting in higher
clock and power requirements. Only optimize if it is >3x the stutter
latency.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.13:
UAPI Changes:
- Add 1X7X5 media-bus formats.
Cross-subsystem Changes:
- Maintainer updates for VKMS and IT6263.
- Add media-bus-fmt for MEDIA_BUS_FMT_RGB101010_1X7X5_*.
- Add IT6263 DT bindings and driver.
Core Changes:
- Add ABGR210101010 support to panic handler.
- Use ATOMIC64_INIT in drm_file.c
- Improve scheduler teardown documentation.
Driver Changes:
- Make mediatek compile on ARM again.
- Add missing drm/drm_bridge.h header include, already in drm-next.
- Small fixes and cleanups to vkms, bridge/it6505, panfrost, panthor.
- Add panic support to nouveau for nv50+.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/344afe41-d27b-408a-8542-bfecfd3555f6@linux.intel.com
|
|
[Why]
In the case where a dml allocation fails for any reason, the
current state's dml contexts would no longer be valid. Then
subsequent calls dc_state_copy_internal would shallow copy
invalid memory and if the new state was released, a double
free would occur.
[How]
Reset dml pointers in new_state to NULL and avoid invalid
pointer
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Ryan Seto <ryanseto@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
If driver allocated region6 size is not same as the size in firmware,
dmcub won't enable region6.
[How]
Use region6 size in dmcub_fw_meta instead of a constant value.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: JinZe Xu <jinze.xu@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Number of taps is incorrectly being set when integer scaling is enabled.
Taps required when src_rect != dst_rect previously not considered.
Perform the calculations when integer scaling is enabled.
Set taps to 1 if the scaling ratio is 1:1.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
IGT displays Dmesg warnings which are likely false
[How]
Disabling p-state checks leading to this warning for DCN31 and DCN314
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Emily Nie <Emily.Nie@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Garbage will show due to dig is on. So blank stream needed.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Fudongwang <Fudong.Wang@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Unconditionally reading DP tunneling support results in extraneous
errors messages on certain devices. Fix this by guarding the DPCD read
for DP tunneling support for USB4 DPIA endpoints.
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Need a flag to force MST blocked discovery for certain branch devices.
[How]
Added a flag to force MST blocked discovery in struct dc_panel_patch.
Reviewed-by: PeiChen Huang <peichen.huang@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
In certain use case such as KDE login screen, there will be no atomic
commit while do the frame update.
If the Panel Replay enabled, it will cause the screen not updated and
looks like system hang.
[How]
Delay few atomic commits before enabled the Panel Replay just like PSR.
Fixes: be64336307a6c ("drm/amd/display: Re-enable panel replay feature")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3686
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3682
Tested-By: Corey Hickey <bugfood-c@fatooh.org>
Tested-By: James Courtier-Dutton <james.dutton@gmail.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Panel Replay feature may also use the same variable with PSR.
Change the variable name and make it not specify for PSR.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
String literals must be assigned to const char pointers.
[How]
By adding const keyword to fix compilation errors.
Reviewed-by: Lohita Mudimela <lohita.mudimela@amd.com>
Signed-off-by: Revalla Hari Krishna <Harikrishna.Revalla@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
HPD error status does not cover Replay desync error status
while executing autotests and CTS tests.
[How]
Refactor the checking flow, reporting the HPD error based on
different eDP feature.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Leon Huang <Leon.Huang1@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable the cleaner shader for GFX11.0.0/11.0.2 GPUs to provide data
isolation between GPU workloads. The cleaner shader is responsible for
clearing the Local Data Store (LDS), Vector General Purpose Registers
(VGPRs), and Scalar General Purpose Registers (SGPRs), which helps
prevent data leakage and ensures accurate computation results.
This update extends cleaner shader support to GFX11.0.0/11.0.2 GPUs,
previously available for GFX11.0.3. It enhances security by clearing GPU
memory between processes and maintains a consistent GPU state across KGD
and KFD workloads.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This feature enables process isolation on the graphics engine by
serializing access to it and adding a cleaner shader which clears LDS
(Local Data Store) and GPRs (General Purpose Registers) between jobs.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Suggested-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In kfd_procfs_show(), the sdma_activity_work_handler is a local variable
and the sdma_activity_work_handler.sdma_activity_work should initialize
with INIT_WORK_ONSTACK() instead of INIT_WORK().
Fixes: 32cb59f31362 ("drm/amdkfd: Track SDMA utilization per process")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The coherency flags can only be determined when the BO is locked and that
in turn is only guaranteed when the mapping is validated.
Fix the check, move the resource check into the function and add an assert
that the BO is locked.
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: d1a372af1c3d ("drm/amdgpu: Set MTYPE in PTE based on BO flags")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Currently, the pp_dpm_mclk values are reported in descending order
on SMU IP v14.0.0/1/4. Adjust to ascending order for consistency
with other clock interfaces.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|