| Age | Commit message (Collapse) | Author |
|---|
|
Move mbox, hw resources and interrupt configuration functions to common
header file. So, that they can be used later by the RVU representor driver.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241023161843.15543-5-gakula@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Reuse the maximum support HW MTU value that is fetch during probe.
Instead of fetching through mbox each time mtu is changed as the
value is fixed for interface.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241023161843.15543-4-gakula@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Group the queue(RX/TX/CQ) memory allocation and free code to single APIs.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241023161843.15543-3-gakula@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Define new API "otx2_init_rsrc" and move the HW blocks
NIX/NPA resources configuration code under this API. So, that
it can be used by the RVU representor driver that has similar
resources of RVU NIC.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Jiri Pirko <jiri@resnulli.us>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241023161843.15543-2-gakula@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Vladimir Oltean says:
====================
Mirroring to DSA CPU port
Users of the NXP LS1028A SoC (drivers/net/dsa/ocelot L2 switch inside)
have requested to mirror packets from the ingress of a switch port to
software. Both port-based and flow-based mirroring is required.
The simplest way I could come up with was to set up tc mirred actions
towards a dummy net_device, and make the offloading of that be accepted
by the driver. Currently, the pattern in drivers is to reject mirred
towards ports they don't know about, but I'm now permitting that,
precisely by mirroring "to the CPU".
For testers, this series depends on commit 34d35b4edbbe ("net/sched:
act_api: deny mismatched skip_sw/skip_hw flags for actions created by
classifiers") from net/main, which is absent from net-next as of the
day of posting (Oct 23). Without the bug fix it is possible to create
invalid configurations which are not rejected by the kernel.
v2: https://lore.kernel.org/20241017165215.3709000-1-vladimir.oltean@nxp.com
RFC: https://lore.kernel.org/20240913152915.2981126-1-vladimir.oltean@nxp.com
For historical purposes, link to a much older (and much different) attempt:
https://lore.kernel.org/20191002233750.13566-1-olteanv@gmail.com
====================
Link: https://patch.msgid.link/20241023135251.1752488-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Debugging certain flows in the offloaded switch data path can be done by
installing two tc-mirred filters for mirroring: one in the hardware data
path, which copies the frames to the CPU, and one which takes the frame
from there and mirrors it to a virtual interface like a dummy device,
where it can be seen with tcpdump.
The effect of having 2 filters run on the same packet can be obtained by
default using tc, by not specifying either the 'skip_sw' or 'skip_hw'
keywords.
Instead of refusing to offload mirroring/redirecting packets towards
interfaces that aren't switch ports, just treat every other destination
for what it is: something that is handled in software, behind the CPU
port.
Usage:
$ ip link add dummy0 type dummy; ip link set dummy0 up
$ tc qdisc add dev swp0 clsact
$ tc filter add dev swp0 ingress protocol ip flower action mirred ingress mirror dev dummy0
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241023135251.1752488-7-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If the CPU bandwidth capacity permits, it may be useful to mirror the
entire ingress of a user port to software.
This is in fact possible to express even if there is no net_device
representation for the CPU port. In fact, that approach was already
exhausted and that representation wouldn't have even helped [1].
The idea behind implementing this is that currently, we refuse to
offload any mirroring towards a non-DSA target net_device. But if we
acknowledge the fact that to reach any foreign net_device, the switch
must send the packet to the CPU anyway, then we can simply offload just
that part, and let the software do the rest. There is only one condition
we need to uphold: the filter needs to be present in the software data
path as well (no skip_sw).
There are 2 actions to consider: FLOW_ACTION_MIRRED (redirect to egress
of target interface) and FLOW_ACTION_MIRRED_INGRESS (redirect to ingress
of target interface). We don't have the ability/API to offload
FLOW_ACTION_MIRRED_INGRESS when the target port is also a DSA user port,
but we could also permit that through mirred to the CPU + software.
Example:
$ ip link add dummy0 type dummy; ip link set dummy0 up
$ tc qdisc add dev swp0 clsact
$ tc filter add dev swp0 ingress matchall action mirred ingress mirror dev dummy0
Any DSA driver with a ds->ops->port_mirror_add() implementation can now
make use of this with no additional change.
[1] https://lore.kernel.org/netdev/20191002233750.13566-1-olteanv@gmail.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241023135251.1752488-6-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Do not leave -EOPNOTSUPP errors without an explanation. It is confusing
for the user to figure out what is wrong otherwise.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241023135251.1752488-5-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We already have an "extack" stack variable in
dsa_user_add_cls_matchall_police() and
dsa_user_add_cls_matchall_mirred(), there is no need to retrieve
it again from cls->common.extack.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241023135251.1752488-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The body is a bit hard to read, hard to extend, and has duplicated
conditions.
Clean up the "if (many conditions) else if (many conditions, some
of them repeated)" pattern by:
- Moving the repeated conditions out
- Replacing the repeated tests for the same variable with a switch/case
- Moving the protocol check inside the dsa_user_add_cls_matchall_mirred()
function call.
This is pure refactoring, no logic has been changed, though some tests
were reordered. The order does not matter - they are independent things
to be tested for.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241023135251.1752488-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Background: switchdev ports offload the Linux bridge, and most of the
packets they handle will never see the CPU. The ports between which
there exists no hardware data path are considered 'foreign' to switchdev.
These can either be normal physical NICs without switchdev offload, or
incompatible switchdev ports, or virtual interfaces like veth/dummy/etc.
In some cases, an offloaded filter can only do half the work, and the
rest must be handled by software. Redirecting/mirroring from the ingress
of a switchdev port towards a foreign interface is one example of
combined hardware/software data path. The most that the switchdev port
can do is to extract the matching packets from its offloaded data path
and send them to the CPU. From there on, the software filter runs
(a second time, after the first run in hardware) on the packet and
performs the mirred action.
It makes sense for switchdev drivers which allow this kind of "half
offloading" to sense the "skip_sw" flag of the filter/action pair, and
deny attempts from the user to install a filter that does not run in
software, because that simply won't work.
In fact, a mirred action on a switchdev port towards a dummy interface
appears to be a valid way of (selectively) monitoring offloaded traffic
that flows through it. IFF_PROMISC was also discussed years ago, but
(despite initial disagreement) there seems to be consensus that this
flag should not affect the destination taken by packets, but merely
whether or not the NIC discards packets with unknown MAC DA for local
processing.
[1] https://lore.kernel.org/netdev/20190830092637.7f83d162@ceranb/
[2] https://lore.kernel.org/netdev/20191002233750.13566-1-olteanv@gmail.com/
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/netdev/ZxUo0Dc0M5Y6l9qF@shredder.mtl.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20241023135251.1752488-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sven Schnelle says:
====================
PtP driver for s390 clocks
these patches add support for using the s390 physical and TOD clock as ptp
clock. To do so, the first patch adds a clock id to the s390 TOD clock,
while the second patch adds the PtP driver itself.
====================
Link: https://patch.msgid.link/20241023065601.449586-1-svens@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a small PtP driver which allows user space to get
the values of the physical and tod clock. This allows
programs like chrony to use STP as clock source and
steer the kernel clock. The physical clock can be used
as a debugging aid to get the clock without any additional
offsets like STP steering or LPAR offset.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Link: https://patch.msgid.link/20241023065601.449586-3-svens@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To allow specifying the clock source in the upcoming PtP driver,
add a clocksource ID to the s390 TOD clock.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Link: https://patch.msgid.link/20241023065601.449586-2-svens@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The HSR test, hsr_ping.sh, actually needs 7 min to run. Around 375s to
be exact, and even more on a debug kernel or kernel with other network
security limits. The timeout setting for the kselftest is currently 45
seconds, which is way too short to integrate hsr tests to run_kselftest
infrastructure. However, timeout of hundreds of seconds is quite a long
time, especially in a CI/CD environment. It seems that we need
accelerate the test and balance with timeout setting.
The most time-consuming func is do_ping_long, where ping command sends
10 packages to the given address. The default interval between two ping
packages is 1s according to the ping Mannual. There isn't any operation
between pings thus we could pass -i 0.1 to ping to make it 10 times
faster.
While even with this short interval, the test still need about 46.4
seconds to finish because of the two HSR interfaces, each of which is
tested by calling do_ping func 12 times and do_ping_long func 19 times
and sleep for 3s.
So, an explicit setting is also needed to slightly increase the
timeout. And to leave us some slack, use 50 as default timeout.
Signed-off-by: Yunshui Jiang <jiangyunshui@kylinos.cn>
Link: https://patch.msgid.link/20241028082757.2945232-1-jiangyunshui@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The barrier_nospec() in 64-bit copy_from_user() is slow. Instead use
pointer masking to force the user pointer to all 1's for an invalid
address.
The kernel test robot reports a 2.6% improvement in the per_thread_ops
benchmark [1].
This is a variation on a patch originally by Josh Poimboeuf [2].
Link: https://lore.kernel.org/202410281344.d02c72a2-oliver.sang@intel.com [1]
Link: https://lore.kernel.org/5b887fe4c580214900e21f6c61095adf9a142735.1730166635.git.jpoimboe@kernel.org [2]
Tested-and-reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Update more header copies with the kernel sources, including const.h,
msr-index.h, arm64's cputype.h, kvm's, bits.h and unaligned.h
- The return from 'write' isn't a pid, fix cut'n'paste error in 'perf
trace'
- Fix up the python binding build on architectures without
HAVE_KVM_STAT_SUPPORT
- Add some more bounds checks to augmented_raw_syscalls.bpf.c (used to
collect syscall pointer arguments in 'perf trace') to make the
resulting bytecode to pass the kernel BPF verifier, allowing us to go
back accepting clang 12.0.1 as the minimum version required for
compiling BPF sources
- Add __NR_capget for x86 to fix a regression on running perf + intel
PT (hw tracing) as non-root setting up the capabilities as described
in https://www.kernel.org/doc/html/latest/admin-guide/perf-security.html
- Fix missing syscalltbl in non-explicitly listed architectures,
noticed on ARM 32-bit, that still needs a .tbl generator for the
syscall id<->name tables, should be added for v6.13
- Handle 'perf test' failure when handling broken DWARF for ASM files
* tag 'perf-tools-fixes-for-v6.12-2-2024-10-30' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf cap: Add __NR_capget to arch/x86 unistd
tools headers: Update the linux/unaligned.h copy with the kernel sources
tools headers arm64: Sync arm64's cputype.h with the kernel sources
tools headers: Synchronize {uapi/}linux/bits.h with the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf python: Fix up the build on architectures without HAVE_KVM_STAT_SUPPORT
perf test: Handle perftool-testsuite_probe failure due to broken DWARF
tools headers UAPI: Sync kvm headers with the kernel sources
perf trace: Fix non-listed archs in the syscalltbl routines
perf build: Change the clang check back to 12.0.1
perf trace augmented_raw_syscalls: Add more checks to pass the verifier
perf trace augmented_raw_syscalls: Add extra array index bounds checking to satisfy some BPF verifiers
perf trace: The return from 'write' isn't a pid
tools headers UAPI: Sync linux/const.h with the kernel headers
|
|
Hou Tao says:
====================
The patch set fixes several issues in bits iterator. Patch #1 fixes the
kmemleak problem of bits iterator. Patch #2~#3 fix the overflow problem
of nr_bits. Patch #4 fixes the potential stack corruption when bits
iterator is used on 32-bit host. Patch #5 adds more test cases for bits
iterator.
Please see the individual patches for more details. And comments are
always welcome.
---
v4:
* patch #1: add ack from Yafang
* patch #3: revert code-churn like changes:
(1) compute nr_bytes and nr_bits before the check of nr_words.
(2) use nr_bits == 64 to check for single u64, preventing build
warning on 32-bit hosts.
* patch #4: use "BITS_PER_LONG == 32" instead of "!defined(CONFIG_64BIT)"
v3: https://lore.kernel.org/bpf/20241025013233.804027-1-houtao@huaweicloud.com/T/#t
* split the bits-iterator related patches from "Misc fixes for bpf"
patch set
* patch #1: use "!nr_bits || bits >= nr_bits" to stop the iteration
* patch #2: add a new helper for the overflow problem
* patch #3: decrease the limitation from 512 to 511 and check whether
nr_bytes is too large for bpf memory allocator explicitly
* patch #5: add two more test cases for bit iterator
v2: http://lore.kernel.org/bpf/d49fa2f4-f743-c763-7579-c3cab4dd88cb@huaweicloud.com
====================
Link: https://lore.kernel.org/r/20241030100516.3633640-1-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add more test cases for bits iterator:
(1) huge word test
Verify the multiplication overflow of nr_bits in bits_iter. Without
the overflow check, when nr_words is 67108865, nr_bits becomes 64,
causing bpf_probe_read_kernel_common() to corrupt the stack.
(2) max word test
Verify correct handling of maximum nr_words value (511).
(3) bad word test
Verify early termination of bits iteration when bits iterator
initialization fails.
Also rename bits_nomem to bits_too_big to better reflect its purpose.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241030100516.3633640-6-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
On 32-bit hosts (e.g., arm32), when a bpf program passes a u64 to
bpf_iter_bits_new(), bpf_iter_bits_new() will use bits_copy to store the
content of the u64. However, bits_copy is only 4 bytes, leading to stack
corruption.
The straightforward solution would be to replace u64 with unsigned long
in bpf_iter_bits_new(). However, this introduces confusion and problems
for 32-bit hosts because the size of ulong in bpf program is 8 bytes,
but it is treated as 4-bytes after passed to bpf_iter_bits_new().
Fix it by changing the type of both bits and bit_count from unsigned
long to u64. However, the change is not enough. The main reason is that
bpf_iter_bits_next() uses find_next_bit() to find the next bit and the
pointer passed to find_next_bit() is an unsigned long pointer instead
of a u64 pointer. For 32-bit little-endian host, it is fine but it is
not the case for 32-bit big-endian host. Because under 32-bit big-endian
host, the first iterated unsigned long will be the bits 32-63 of the u64
instead of the expected bits 0-31. Therefore, in addition to changing
the type, swap the two unsigned longs within the u64 for 32-bit
big-endian host.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241030100516.3633640-5-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Check the validity of nr_words in bpf_iter_bits_new(). Without this
check, when multiplication overflow occurs for nr_bits (e.g., when
nr_words = 0x0400-0001, nr_bits becomes 64), stack corruption may occur
due to bpf_probe_read_kernel_common(..., nr_bytes = 0x2000-0008).
Fix it by limiting the maximum value of nr_words to 511. The value is
derived from the current implementation of BPF memory allocator. To
ensure compatibility if the BPF memory allocator's size limitation
changes in the future, use the helper bpf_mem_alloc_check_size() to
check whether nr_bytes is too larger. And return -E2BIG instead of
-ENOMEM for oversized nr_bytes.
Fixes: 4665415975b0 ("bpf: Add bits iterator")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241030100516.3633640-4-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Introduce bpf_mem_alloc_check_size() to check whether the allocation
size exceeds the limitation for the kmalloc-equivalent allocator. The
upper limit for percpu allocation is LLIST_NODE_SZ bytes larger than
non-percpu allocation, so a percpu argument is added to the helper.
The helper will be used in the following patch to check whether the size
parameter passed to bpf_mem_alloc() is too big.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241030100516.3633640-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
bpf_iter_bits_destroy() uses "kit->nr_bits <= 64" to check whether the
bits are dynamically allocated. However, the check is incorrect and may
cause a kmemleak as shown below:
unreferenced object 0xffff88812628c8c0 (size 32):
comm "swapper/0", pid 1, jiffies 4294727320
hex dump (first 32 bytes):
b0 c1 55 f5 81 88 ff ff f0 f0 f0 f0 f0 f0 f0 f0 ..U...........
f0 f0 f0 f0 f0 f0 f0 f0 00 00 00 00 00 00 00 00 ..............
backtrace (crc 781e32cc):
[<00000000c452b4ab>] kmemleak_alloc+0x4b/0x80
[<0000000004e09f80>] __kmalloc_node_noprof+0x480/0x5c0
[<00000000597124d6>] __alloc.isra.0+0x89/0xb0
[<000000004ebfffcd>] alloc_bulk+0x2af/0x720
[<00000000d9c10145>] prefill_mem_cache+0x7f/0xb0
[<00000000ff9738ff>] bpf_mem_alloc_init+0x3e2/0x610
[<000000008b616eac>] bpf_global_ma_init+0x19/0x30
[<00000000fc473efc>] do_one_initcall+0xd3/0x3c0
[<00000000ec81498c>] kernel_init_freeable+0x66a/0x940
[<00000000b119f72f>] kernel_init+0x20/0x160
[<00000000f11ac9a7>] ret_from_fork+0x3c/0x70
[<0000000004671da4>] ret_from_fork_asm+0x1a/0x30
That is because nr_bits will be set as zero in bpf_iter_bits_next()
after all bits have been iterated.
Fix the issue by setting kit->bit to kit->nr_bits instead of setting
kit->nr_bits to zero when the iteration completes in
bpf_iter_bits_next(). In addition, use "!nr_bits || bits >= nr_bits" to
check whether the iteration is complete and still use "nr_bits > 64" to
indicate whether bits are dynamically allocated. The "!nr_bits" check is
necessary because bpf_iter_bits_new() may fail before setting
kit->nr_bits, and this condition will stop the iteration early instead
of accessing the zeroed or freed kit->bits.
Considering the initial value of kit->bits is -1 and the type of
kit->nr_bits is unsigned int, change the type of kit->nr_bits to int.
The potential overflow problem will be handled in the following patch.
Fixes: 4665415975b0 ("bpf: Add bits iterator")
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241030100516.3633640-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Fix __hci_cmd_sync_sk() to return not NULL for unknown opcodes.
__hci_cmd_sync_sk() returns NULL if a command returns a status event.
However, it also returns NULL where an opcode doesn't exist in the
hci_cc table because hci_cmd_complete_evt() assumes status = skb->data[0]
for unknown opcodes.
This leads to null-ptr-deref in cmd_sync for HCI_OP_READ_LOCAL_CODECS as
there is no hci_cc for HCI_OP_READ_LOCAL_CODECS, which always assumes
status = skb->data[0].
KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077]
CPU: 1 PID: 2000 Comm: kworker/u9:5 Not tainted 6.9.0-ga6bcb805883c-dirty #10
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: hci7 hci_power_on
RIP: 0010:hci_read_supported_codecs+0xb9/0x870 net/bluetooth/hci_codec.c:138
Code: 08 48 89 ef e8 b8 c1 8f fd 48 8b 75 00 e9 96 00 00 00 49 89 c6 48 ba 00 00 00 00 00 fc ff df 4c 8d 60 70 4c 89 e3 48 c1 eb 03 <0f> b6 04 13 84 c0 0f 85 82 06 00 00 41 83 3c 24 02 77 0a e8 bf 78
RSP: 0018:ffff888120bafac8 EFLAGS: 00010212
RAX: 0000000000000000 RBX: 000000000000000e RCX: ffff8881173f0040
RDX: dffffc0000000000 RSI: ffffffffa58496c0 RDI: ffff88810b9ad1e4
RBP: ffff88810b9ac000 R08: ffffffffa77882a7 R09: 1ffffffff4ef1054
R10: dffffc0000000000 R11: fffffbfff4ef1055 R12: 0000000000000070
R13: 0000000000000000 R14: 0000000000000000 R15: ffff88810b9ac000
FS: 0000000000000000(0000) GS:ffff8881f6c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6ddaa3439e CR3: 0000000139764003 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
hci_read_local_codecs_sync net/bluetooth/hci_sync.c:4546 [inline]
hci_init_stage_sync net/bluetooth/hci_sync.c:3441 [inline]
hci_init4_sync net/bluetooth/hci_sync.c:4706 [inline]
hci_init_sync net/bluetooth/hci_sync.c:4742 [inline]
hci_dev_init_sync net/bluetooth/hci_sync.c:4912 [inline]
hci_dev_open_sync+0x19a9/0x2d30 net/bluetooth/hci_sync.c:4994
hci_dev_do_open net/bluetooth/hci_core.c:483 [inline]
hci_power_on+0x11e/0x560 net/bluetooth/hci_core.c:1015
process_one_work kernel/workqueue.c:3267 [inline]
process_scheduled_works+0x8ef/0x14f0 kernel/workqueue.c:3348
worker_thread+0x91f/0xe50 kernel/workqueue.c:3429
kthread+0x2cb/0x360 kernel/kthread.c:388
ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
Fixes: abfeea476c68 ("Bluetooth: hci_sync: Convert MGMT_OP_START_DISCOVERY")
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two small fixes, both in drivers (ufs and scsi_debug)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Fix another deadlock during RTC update
scsi: scsi_debug: Fix do_device_access() handling of unexpected SG copy length
|
|
Quirk is needed to enable headset microphone on missing pin 0x19.
Signed-off-by: Christoffer Sandberg <cs@tuxedo.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241029151653.80726-2-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Quirk is needed to enable headset microphone on missing pin 0x19.
Signed-off-by: Christoffer Sandberg <cs@tuxedo.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241029151653.80726-1-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The WD19 family of docks has the same audio chipset as the WD15. This
change enables jack detection on the WD19.
We don't need the dell_dock_mixer_init quirk for the WD19. It is only
needed because of the dell_alc4020_map quirk for the WD15 in
mixer_maps.c, which disables the volume controls. Even for the WD15,
this quirk was apparently only needed when the dock firmware was not
updated.
Signed-off-by: Jan Schär <jan@jschaer.ch>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20241029221249.15661-1-jan@jschaer.ch
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.12
The biggest set of changes here is Hans' fixes and quirks for various
Baytrail based platforms with RT5640 CODECs, and there's one core fix
for a missed length assignment for __counted_by() checking. Otherwise
it's small device specific fixes, several of them in the DT bindings.
|
|
Jason Xing says:
====================
tcp: add tcp_warn_once() common helper
Paolo Abeni suggested we can introduce a new helper to cover more cases
in the future for better debug.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add two fields to print in the helper which here covers tcp_send_loss_probe().
Link: https://lore.kernel.org/all/5632e043-bdba-4d75-bc7e-bf58014492fd@redhat.com/
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Cc: Neal Cardwell <ncardwell@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Following the commit c8770db2d544 ("tcp: check skb is non-NULL
in tcp_rto_delta_us()"), we decided to add a helper so that it's
easier to get verbose warning on either cases.
Link: https://lore.kernel.org/all/5632e043-bdba-4d75-bc7e-bf58014492fd@redhat.com/
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Cc: Neal Cardwell <ncardwell@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I got a syzbot report without a repro [1] crashing in nf_send_reset6()
I think the issue is that dev->hard_header_len is zero, and we attempt
later to push an Ethernet header.
Use LL_MAX_HEADER, as other functions in net/ipv6/netfilter/nf_reject_ipv6.c.
[1]
skbuff: skb_under_panic: text:ffffffff89b1d008 len:74 put:14 head:ffff88803123aa00 data:ffff88803123a9f2 tail:0x3c end:0x140 dev:syz_tun
kernel BUG at net/core/skbuff.c:206 !
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 0 UID: 0 PID: 7373 Comm: syz.1.568 Not tainted 6.12.0-rc2-syzkaller-00631-g6d858708d465 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
RIP: 0010:skb_panic net/core/skbuff.c:206 [inline]
RIP: 0010:skb_under_panic+0x14b/0x150 net/core/skbuff.c:216
Code: 0d 8d 48 c7 c6 60 a6 29 8e 48 8b 54 24 08 8b 0c 24 44 8b 44 24 04 4d 89 e9 50 41 54 41 57 41 56 e8 ba 30 38 02 48 83 c4 20 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3
RSP: 0018:ffffc900045269b0 EFLAGS: 00010282
RAX: 0000000000000088 RBX: dffffc0000000000 RCX: cd66dacdc5d8e800
RDX: 0000000000000000 RSI: 0000000000000200 RDI: 0000000000000000
RBP: ffff88802d39a3d0 R08: ffffffff8174afec R09: 1ffff920008a4ccc
R10: dffffc0000000000 R11: fffff520008a4ccd R12: 0000000000000140
R13: ffff88803123aa00 R14: ffff88803123a9f2 R15: 000000000000003c
FS: 00007fdbee5ff6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000005d322000 CR4: 00000000003526f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
skb_push+0xe5/0x100 net/core/skbuff.c:2636
eth_header+0x38/0x1f0 net/ethernet/eth.c:83
dev_hard_header include/linux/netdevice.h:3208 [inline]
nf_send_reset6+0xce6/0x1270 net/ipv6/netfilter/nf_reject_ipv6.c:358
nft_reject_inet_eval+0x3b9/0x690 net/netfilter/nft_reject_inet.c:48
expr_call_ops_eval net/netfilter/nf_tables_core.c:240 [inline]
nft_do_chain+0x4ad/0x1da0 net/netfilter/nf_tables_core.c:288
nft_do_chain_inet+0x418/0x6b0 net/netfilter/nft_chain_filter.c:161
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626
nf_hook include/linux/netfilter.h:269 [inline]
NF_HOOK include/linux/netfilter.h:312 [inline]
br_nf_pre_routing_ipv6+0x63e/0x770 net/bridge/br_netfilter_ipv6.c:184
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_bridge_pre net/bridge/br_input.c:277 [inline]
br_handle_frame+0x9fd/0x1530 net/bridge/br_input.c:424
__netif_receive_skb_core+0x13e8/0x4570 net/core/dev.c:5562
__netif_receive_skb_one_core net/core/dev.c:5666 [inline]
__netif_receive_skb+0x12f/0x650 net/core/dev.c:5781
netif_receive_skb_internal net/core/dev.c:5867 [inline]
netif_receive_skb+0x1e8/0x890 net/core/dev.c:5926
tun_rx_batched+0x1b7/0x8f0 drivers/net/tun.c:1550
tun_get_user+0x3056/0x47e0 drivers/net/tun.c:2007
tun_chr_write_iter+0x10d/0x1f0 drivers/net/tun.c:2053
new_sync_write fs/read_write.c:590 [inline]
vfs_write+0xa6d/0xc90 fs/read_write.c:683
ksys_write+0x183/0x2b0 fs/read_write.c:736
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fdbeeb7d1ff
Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 c9 8d 02 00 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 1c 8e 02 00 48
RSP: 002b:00007fdbee5ff000 EFLAGS: 00000293 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007fdbeed36058 RCX: 00007fdbeeb7d1ff
RDX: 000000000000008e RSI: 0000000020000040 RDI: 00000000000000c8
RBP: 00007fdbeebf12be R08: 0000000000000000 R09: 0000000000000000
R10: 000000000000008e R11: 0000000000000293 R12: 0000000000000000
R13: 0000000000000000 R14: 00007fdbeed36058 R15: 00007ffc38de06e8
</TASK>
Fixes: c8d7b98bec43 ("netfilter: move nf_send_resetX() code to nf_reject_ipvX modules")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
ip6table_nat module unload has refcnt warning for UAF. call trace is:
WARNING: CPU: 1 PID: 379 at kernel/module/main.c:853 module_put+0x6f/0x80
Modules linked in: ip6table_nat(-)
CPU: 1 UID: 0 PID: 379 Comm: ip6tables Not tainted 6.12.0-rc4-00047-gc2ee9f594da8-dirty #205
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:module_put+0x6f/0x80
Call Trace:
<TASK>
get_info+0x128/0x180
do_ip6t_get_ctl+0x6a/0x430
nf_getsockopt+0x46/0x80
ipv6_getsockopt+0xb9/0x100
rawv6_getsockopt+0x42/0x190
do_sock_getsockopt+0xaa/0x180
__sys_getsockopt+0x70/0xc0
__x64_sys_getsockopt+0x20/0x30
do_syscall_64+0xa2/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Concurrent execution of module unload and get_info() trigered the warning.
The root cause is as follows:
cpu0 cpu1
module_exit
//mod->state = MODULE_STATE_GOING
ip6table_nat_exit
xt_unregister_template
kfree(t)
//removed from templ_list
getinfo()
t = xt_find_table_lock
list_for_each_entry(tmpl, &xt_templates[af]...)
if (strcmp(tmpl->name, name))
continue; //table not found
try_module_get
list_for_each_entry(t, &xt_net->tables[af]...)
return t; //not get refcnt
module_put(t->me) //uaf
unregister_pernet_subsys
//remove table from xt_net list
While xt_table module was going away and has been removed from
xt_templates list, we couldnt get refcnt of xt_table->me. Check
module in xt_net->tables list re-traversal to fix it.
Fixes: fdacd57c79b7 ("netfilter: x_tables: never register tables by default")
Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
err is never used, remove it.
Signed-off-by: Liu Jing <liujing@cmss.chinamobile.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
ETHTOOL_MSG_PHY_GET/GET_REPLY/NTF is missing in the ethtool message list.
Add it to the ethool netlink documentation.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20241028132351.75922-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Hou Tao reported an issue with bpf_fastcall patterns allowing extra
stack space above MAX_BPF_STACK limit. This extra stack allowance is
not integrated properly with the following verifier parts:
- backtracking logic still assumes that stack can't exceed
MAX_BPF_STACK;
- bpf_verifier_env->scratched_stack_slots assumes only 64 slots are
available.
Here is an example of an issue with precision tracking
(note stack slot -8 tracked as precise instead of -520):
0: (b7) r1 = 42 ; R1_w=42
1: (b7) r2 = 42 ; R2_w=42
2: (7b) *(u64 *)(r10 -512) = r1 ; R1_w=42 R10=fp0 fp-512_w=42
3: (7b) *(u64 *)(r10 -520) = r2 ; R2_w=42 R10=fp0 fp-520_w=42
4: (85) call bpf_get_smp_processor_id#8 ; R0_w=scalar(...)
5: (79) r2 = *(u64 *)(r10 -520) ; R2_w=42 R10=fp0 fp-520_w=42
6: (79) r1 = *(u64 *)(r10 -512) ; R1_w=42 R10=fp0 fp-512_w=42
7: (bf) r3 = r10 ; R3_w=fp0 R10=fp0
8: (0f) r3 += r2
mark_precise: frame0: last_idx 8 first_idx 0 subseq_idx -1
mark_precise: frame0: regs=r2 stack= before 7: (bf) r3 = r10
mark_precise: frame0: regs=r2 stack= before 6: (79) r1 = *(u64 *)(r10 -512)
mark_precise: frame0: regs=r2 stack= before 5: (79) r2 = *(u64 *)(r10 -520)
mark_precise: frame0: regs= stack=-8 before 4: (85) call bpf_get_smp_processor_id#8
mark_precise: frame0: regs= stack=-8 before 3: (7b) *(u64 *)(r10 -520) = r2
mark_precise: frame0: regs=r2 stack= before 2: (7b) *(u64 *)(r10 -512) = r1
mark_precise: frame0: regs=r2 stack= before 1: (b7) r2 = 42
9: R2_w=42 R3_w=fp42
9: (95) exit
This patch disables the additional allowance for the moment.
Also, two test cases are removed:
- bpf_fastcall_max_stack_ok:
it fails w/o additional stack allowance;
- bpf_fastcall_max_stack_fail:
this test is no longer necessary, stack size follows
regular rules, pattern invalidation is checked by other
test cases.
Reported-by: Hou Tao <houtao@huaweicloud.com>
Closes: https://lore.kernel.org/bpf/20241023022752.172005-1-houtao@huaweicloud.com/
Fixes: 5b5f51bff1b6 ("bpf: no_caller_saved_registers attribute for helper calls")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20241029193911.1575719-1-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- cgroup_bpf_release_fn() could saturate system_wq with
cgrp->bpf.release_work which can then form a circular dependency
leading to deadlocks. Fix by using a dedicated workqueue. The
system_wq's max concurrency limit is being increased separately.
- Fix theoretical off-by-one bug when enforcing max cgroup hierarchy
depth
* tag 'cgroup-for-6.12-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Fix potential overflow issue when checking max_depth
cgroup/bpf: use a dedicated workqueue for cgroup bpf destruction
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Instances of scx_ops_bypass() could race each other leading to
misbehavior. Fix by protecting the operation with a spinlock.
- selftest and userspace header fixes
* tag 'sched_ext-for-6.12-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Fix enq_last_no_enq_fails selftest
sched_ext: Make cast_mask() inline
scx: Fix raciness in scx_ops_bypass()
scx: Fix exit selftest to use custom DSQ
sched_ext: Fix function pointer type mismatches in BPF selftests
selftests/sched_ext: add order-only dependency of runner.o on BPFOBJ
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fixes from Vlastimil Babka:
- Fix for a slub_kunit test warning with MEM_ALLOC_PROFILING_DEBUG (Pei
Xiao)
- Fix for a MTE-based KASAN BUG in krealloc() (Qun-Wei Lin)
* tag 'slab-for-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm: krealloc: Fix MTE false alarm in __do_krealloc
slub/kunit: fix a WARNING due to unwrapped __kmalloc_cache_noprof
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"21 hotfixes. 13 are cc:stable. 13 are MM and 8 are non-MM.
No particular theme here - mainly singletons, a couple of doubletons.
Please see the changelogs"
* tag 'mm-hotfixes-stable-2024-10-28-21-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits)
mm: avoid unconditional one-tick sleep when swapcache_prepare fails
mseal: update mseal.rst
mm: split critical region in remap_file_pages() and invoke LSMs in between
selftests/mm: fix deadlock for fork after pthread_create with atomic_bool
Revert "selftests/mm: replace atomic_bool with pthread_barrier_t"
Revert "selftests/mm: fix deadlock for fork after pthread_create on ARM"
tools: testing: add expand-only mode VMA test
mm/vma: add expand-only VMA merge mode and optimise do_brk_flags()
resource,kexec: walk_system_ram_res_rev must retain resource flags
nilfs2: fix kernel bug due to missing clearing of checked flag
mm: numa_clear_kernel_node_hotplug: Add NUMA_NO_NODE check for node id
ocfs2: pass u64 to ocfs2_truncate_inline maybe overflow
mm: shmem: fix data-race in shmem_getattr()
mm: mark mas allocation in vms_abort_munmap_vmas as __GFP_NOFAIL
x86/traps: move kmsan check after instrumentation_begin
resource: remove dependency on SPARSEMEM from GET_FREE_REGION
mm/mmap: fix race in mmap_region() with ftruncate()
mm/page_alloc: let GFP_ATOMIC order-0 allocs access highatomic reserves
fork: only invoke khugepaged, ksm hooks if no error
fork: do not invoke uffd on fork if error occurs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm fix from Jarkko Sakkinen:
"Address a significant boot-time delay issue"
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219229
* tag 'tpmdd-next-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: Lazily flush the auth session
tpm: Rollback tpm2_load_null()
tpm: Return tpm2_sessions_init() when null key creation fails
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
wireless fixes for v6.12-rc6
Another set of fixes, mostly iwlwifi:
* fix infinite loop in 6 GHz scan if more than
255 colocated APs were reported
* revert removal of retry loops for now to work
around issues with firmware initialization on
some devices/platforms
* fix SAR table issues with some BIOSes
* fix race in suspend/debug collection
* fix memory leak in fw recovery
* fix link ID leak in AP mode for older devices
* fix sending TX power constraints
* fix link handling in FW restart
And also the stack:
* fix setting TX power from userspace with the new
chanctx emulation code for old-style drivers
* fix a memory corruption bug due to structure
embedding
* fix CQM configuration double-free when moving
between net namespaces
* tag 'wireless-2024-10-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: ieee80211_i: Fix memory corruption bug in struct ieee80211_chanctx
wifi: iwlwifi: mvm: fix 6 GHz scan construction
wifi: cfg80211: clear wdev->cqm_config pointer on free
mac80211: fix user-power when emulating chanctx
Revert "wifi: iwlwifi: remove retry loops in start"
wifi: iwlwifi: mvm: don't add default link in fw restart flow
wifi: iwlwifi: mvm: Fix response handling in iwl_mvm_send_recovery_cmd()
wifi: iwlwifi: mvm: SAR table alignment
wifi: iwlwifi: mvm: Use the sync timepoint API in suspend
wifi: iwlwifi: mvm: really send iwl_txpower_constraints_cmd
wifi: iwlwifi: mvm: don't leak a link on AP removal
====================
Link: https://patch.msgid.link/20241029093926.13750-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.13
The first -next "new features" pull request for v6.13. This is a big
one as we have not been able to send one earlier. We have also some
patches affecting other subsystems: in staging we deleted the rtl8192e
driver and in debugfs added a new interface to save struct
file_operations memory; both were acked by GregKH.
Because of the lib80211/libipw move there were quite a lot of
conflicts and to solve those we decided to merge net-next into
wireless-next.
Major changes:
cfg80211/mac80211
* stop exporting wext symbols
* new mac80211 op to indicate that a new interface is to be added
* support radio separation of multi-band devices
Wireless Extensions
* move wext spy implementation to libiw
* remove iw_public_data from struct net_device
brcmfmac
* optional LPO clock support
ipw2x00
* move remaining lib80211 code into libiw
wilc1000
* WILC3000 support
rtw89
* RTL8852BE and RTL8852BE-VT BT-coexistence improvements
* tag 'wireless-next-2024-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (126 commits)
mac80211: Remove NOP call to ieee80211_hw_config
wifi: iwlwifi: work around -Wenum-compare-conditional warning
wifi: mac80211: re-order assigning channel in activate links
wifi: mac80211: convert debugfs files to short fops
debugfs: add small file operations for most files
wifi: mac80211: remove misleading j_0 construction parts
wifi: mac80211_hwsim: use hrtimer_active()
wifi: mac80211: refactor BW limitation check for CSA parsing
wifi: mac80211: filter on monitor interfaces based on configured channel
wifi: mac80211: refactor ieee80211_rx_monitor
wifi: mac80211: add support for the monitor SKIP_TX flag
wifi: cfg80211: add monitor SKIP_TX flag
wifi: mac80211: add flag to opt out of virtual monitor support
wifi: cfg80211: pass net_device to .set_monitor_channel
wifi: mac80211: remove status->ampdu_delimiter_crc
wifi: cfg80211: report per wiphy radio antenna mask
wifi: mac80211: use vif radio mask to limit creating chanctx
wifi: mac80211: use vif radio mask to limit ibss scan frequencies
wifi: cfg80211: add option for vif allowed radios
wifi: iwlwifi: allow IWL_FW_CHECK() with just a string
...
====================
Link: https://patch.msgid.link/20241025170705.5F6B2C4CEC3@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Przemek Kitszel says:
====================
devlink: minor cleanup
(Patch 1, 2) Add one helper shortcut to put u64 values into skb.
(Patch 3, 4) Minor cleanup for error codes.
(Patch 5, 6, 7) Remove some devlink_resource_*() usage and functions
itself via replacing devlink_* variants by devl_* ones.
v2: fix metadata (cc list, target tree) - Jiri; rebase; tags collected
v1: https://lore.kernel.org/20241018102009.10124-1-przemyslaw.kitszel@intel.com
====================
Link: https://patch.msgid.link/20241023131248.27192-1-przemyslaw.kitszel@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove unused devlink_resource_register(); all the drivers use
devl_resource_register() variant instead.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20241023131248.27192-8-przemyslaw.kitszel@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove not used devlink_resource_occ_get_register() and
devlink_resource_occ_get_unregister() functions; current devlink resource
users are fine with devl_ variants of the two.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20241023131248.27192-7-przemyslaw.kitszel@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace devlink_resource_register(), devlink_resource_occ_get_register(),
and devlink_resource_occ_get_unregister() calls by respective devl_*
variants. Mentioned functions have no direct users in any drivers, and are
going to be removed in subsequent patches.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20241023131248.27192-6-przemyslaw.kitszel@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Consolidate error codes for too big message size.
Current code is written to return -EINVAL when tailroom in the skb msg
would be exhausted precisely when it's time to nest, and return -EMSGSIZE
in all other "not enough space" conditions.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20241023131248.27192-5-przemyslaw.kitszel@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Differentiate error codes of devl_resource_register().
Replace one of -EINVAL exit paths by -EEXIST. This should aid developers
introducing new resources and registering them in the wrong order.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20241023131248.27192-4-przemyslaw.kitszel@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
