summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-12-12Merge branch 'pci/misc' into nextBjorn Helgaas
* pci/misc: PCI: Enable access to non-standard VPD for Chelsio devices (cxgb3) PCI: Expand "VPD access disabled" quirk message PCI: pciehp: Remove loading message PCI: hotplug: Remove hotplug core message PCI: Remove service driver load/unload messages PCI/AER: Log AER IRQ when claiming Root Port PCI/AER: Log errors with PCI device, not PCIe service device PCI/AER: Remove unused version macros PCI/PME: Log PME IRQ when claiming Root Port PCI/PME: Drop unused support for PMEs from Root Complex Event Collectors PCI: Move config space size macros to pci_regs.h
2016-12-12Merge branch 'pci/hotplug' into nextBjorn Helgaas
* pci/hotplug: PCI: pciehp: Leave power indicator on when enabling already-enabled slot PCI: pciehp: Prioritize data-link event over presence detect PCI: cpqphp: Add missing call to pci_disable_device()
2016-12-12Merge branch 'pci/enumeration' into nextBjorn Helgaas
* pci/enumeration: PCI: Warn on possible RW1C corruption for sub-32 bit config writes PCI: Create revision file in sysfs
2016-12-12Merge branch 'pci/ecam' into nextBjorn Helgaas
* pci/ecam: PCI: Explain ARM64 ACPI/MCFG quirk Kconfig and build strategy PCI: Add MCFG quirks for X-Gene host controller PCI: Add MCFG quirks for Cavium ThunderX pass1.x host controller PCI: Add MCFG quirks for Cavium ThunderX pass2.x host controller PCI: thunder-pem: Factor out resource lookup PCI: Add MCFG quirks for HiSilicon Hip05/06/07 host controllers PCI: Add MCFG quirks for Qualcomm QDF2432 host controller PCI/ACPI: Provide acpi_get_rc_resources() for ARM64 platform PCI/ACPI: Check for platform-specific MCFG quirks PCI/ACPI: Extend pci_mcfg_lookup() to return ECAM config accessors arm64: PCI: Exclude ACPI "consumer" resources from host bridge windows arm64: PCI: Manage controller-specific data on per-controller basis arm64: PCI: Search ACPI namespace to ensure ECAM space is reserved arm64: PCI: Add local struct device pointers ACPI: Add acpi_resource_consumer() to find device that claims a resource
2016-12-12Merge branch 'pci/aspm' into nextBjorn Helgaas
* pci/aspm: PCI/ASPM: Don't retrain link if ASPM not possible PCI/ASPM: Use permission-specific DEVICE_ATTR variants
2016-12-12PCI: Enable access to non-standard VPD for Chelsio devices (cxgb3)Alexey Kardashevskiy
There is at least one Chelsio 10Gb card which uses VPD area to store some non-standard blocks (example below). However pci_vpd_size() returns the length of the first block only assuming that there can be only one VPD "End Tag". Since 4e1a635552d3 ("vfio/pci: Use kernel VPD access functions"), VFIO blocks access beyond that offset, which prevents the guest "cxgb3" driver from probing the device. The host system does not have this problem as its driver accesses the config space directly without pci_read_vpd(). Add a quirk to override the VPD size to a bigger value. The maximum size is taken from EEPROMSIZE in drivers/net/ethernet/chelsio/cxgb3/common.h. We do not read the tag as the cxgb3 driver does as the driver supports writing to EEPROM/VPD and when it writes, it only checks for 8192 bytes boundary. The quirk is registered for all devices supported by the cxgb3 driver. This adds a quirk to the PCI layer (not to the cxgb3 driver) as the cxgb3 driver itself accesses VPD directly and the problem only exists with the vfio-pci driver (when cxgb3 is not running on the host and may not be even loaded) which blocks accesses beyond the first block of VPD data. However vfio-pci itself does not have quirks mechanism so we add it to PCI. This is the controller: Ethernet controller [0200]: Chelsio Communications Inc T310 10GbE Single Port Adapter [1425:0030] This is what I parsed from its VPD: === b'\x82*\x0010 Gigabit Ethernet-SR PCI Express Adapter\x90J\x00EC\x07D76809 FN\x0746K' 0000 Large item 42 bytes; name 0x2 Identifier String b'10 Gigabit Ethernet-SR PCI Express Adapter' 002d Large item 74 bytes; name 0x10 #00 [EC] len=7: b'D76809 ' #0a [FN] len=7: b'46K7897' #14 [PN] len=7: b'46K7897' #1e [MN] len=4: b'1037' #25 [FC] len=4: b'5769' #2c [SN] len=12: b'YL102035603V' #3b [NA] len=12: b'00145E992ED1' 007a Small item 1 bytes; name 0xf End Tag 0c00 Large item 16 bytes; name 0x2 Identifier String b'S310E-SR-X ' 0c13 Large item 234 bytes; name 0x10 #00 [PN] len=16: b'TBD ' #13 [EC] len=16: b'110107730D2 ' #26 [SN] len=16: b'97YL102035603V ' #39 [NA] len=12: b'00145E992ED1' #48 [V0] len=6: b'175000' #51 [V1] len=6: b'266666' #5a [V2] len=6: b'266666' #63 [V3] len=6: b'2000 ' #6c [V4] len=2: b'1 ' #71 [V5] len=6: b'c2 ' #7a [V6] len=6: b'0 ' #83 [V7] len=2: b'1 ' #88 [V8] len=2: b'0 ' #8d [V9] len=2: b'0 ' #92 [VA] len=2: b'0 ' #97 [RV] len=80: b's\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'... 0d00 Large item 252 bytes; name 0x11 #00 [VC] len=16: b'122310_1222 dp ' #13 [VD] len=16: b'610-0001-00 H1\x00\x00' #26 [VE] len=16: b'122310_1353 fp ' #39 [VF] len=16: b'610-0001-00 H1\x00\x00' #4c [RW] len=173: b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'... 0dff Small item 0 bytes; name 0xf End Tag 10f3 Large item 13315 bytes; name 0x62 !!! unknown item name 98: b'\xd0\x03\x00@`\x0c\x08\x00\x00\x00\x00\x00\x00\x00\x00\x00' === Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-12PCI: Expand "VPD access disabled" quirk messageBjorn Helgaas
It's not very enlightening to see pci 0000:07:00.0: [Firmware Bug]: VPD access disabled in the dmesg log because there's no clue about what the firmware bug is. Expand the message to explain why we're disabling VPD. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-12PCI: pciehp: Remove loading messageBjorn Helgaas
Remove the "PCI Express Hot Plug Controller Driver" version message. I don't think it contains any useful information. Remove unused #defines and move the author information to a comment. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-12PCI: hotplug: Remove hotplug core messageBjorn Helgaas
Remove the "PCI Hot Plug PCI Core" version message. I don't think it contains any useful information. Remove unused #defines and move the author information to a comment. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-12PCI: Remove service driver load/unload messagesBjorn Helgaas
Remove the "service driver %s loaded" and unloaded messages. All service drivers already log something in their probe functions, where they can log more useful details. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-12PCI/AER: Log AER IRQ when claiming Root PortBjorn Helgaas
Add a log message when we enable AER on a Root Port and the hierarchy below it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-12PCI/AER: Log errors with PCI device, not PCIe service deviceBjorn Helgaas
All other AER-related log messages use the PCI device, e.g., "pci 0000:00:1c.0", not the PCIe service device, e.g., "aer 0000:00:1c.0:pcie02". Change the probe error messages to match the rest and include a little context. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-12PCI/AER: Remove unused version macrosBjorn Helgaas
Remove the unused DRIVER_VERSION, DRIVER_AUTHOR, and DRIVER_DESC macros. The author information is already included in a comment above. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-12PCI/PME: Log PME IRQ when claiming Root PortBjorn Helgaas
We already log a "Signaling PME" whenever the PME service driver claims a Root Port. In fact, we also log the same message for every device in the hierarchy below the Root Port. Log the "Signaling PME" once (only for the Root Port, since we can trivially find out which devices are below the Root Port), and include the IRQ number in the message to help connect the dots with /proc/interrupts. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-12PCI/PME: Drop unused support for PMEs from Root Complex Event CollectorsBjorn Helgaas
Since we register pcie_pme_driver only for PCI_EXP_TYPE_ROOT_PORT, the PME driver never claims Root Complex Event Collectors. Remove unused code related to Root Complex Event Collectors. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-12PCI: Move config space size macros to pci_regs.hWang Sheng-Hui
Move PCI configuration space size macros (PCI_CFG_SPACE_SIZE and PCI_CFG_SPACE_EXP_SIZE) from drivers/pci/pci.h to include/uapi/linux/pci_regs.h so they can be used by more drivers and eliminate duplicate definitions. [bhelgaas: Expand comment to include PCI-X details] Signed-off-by: Wang Sheng-Hui <shhuiw@foxmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-08PCI/ASPM: Don't retrain link if ASPM not possibleDavid Daney
Some (defective) PCIe devices are not able to reliably do link retraining. Check to see if ASPM is possible between link partners before configuring common clocking, and doing the resulting link retraining. If ASPM is not possible, there is no reason to risk losing access to a device due to an unnecessary link retraining. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-08PCI: pciehp: Leave power indicator on when enabling already-enabled slotAshok Raj
If an error occurs when enabling a slot, pciehp_power_thread() turns off the power indicator. But if the only error is that the slot was already enabled, we should leave the power indicator on. Return success if called to enable an already-enabled slot. This is in the same spirit of the special handling for EEXISTS when pciehp_configure_device() determines the slot devices already exist. Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2016-12-07PCI: pciehp: Prioritize data-link event over presence detectAshok Raj
If Slot Status indicates changes in both Data Link Layer Status and Presence Detect, prioritize the Link status change. When both events are observed, pciehp currently relies on the Slot Status Presence Detect State (PDS) to agree with the Link Status Data Link Layer Active status. The Presence Detect State, however, may be set to 1 through out-of-band presence detect even if the link is down, which creates conflicting events. Since the Link Status accurately reflects the reachability of the downstream bus, the Link Status event should take precedence over a Presence Detect event. Skip checking the PDC status if we handled a link event in the same handler. Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Keith Busch <keith.busch@intel.com>
2016-12-07PCI: Explain ARM64 ACPI/MCFG quirk Kconfig and build strategyBjorn Helgaas
Add Makefile comments to explain the Kconfig and build strategy for ARM64 drivers that work around not-quite-ECAM issues. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-06PCI: Add MCFG quirks for X-Gene host controllerDuc Dang
PCIe controllers in X-Gene SoCs are not ECAM compliant: software needs to configure additional controller's register to address device at bus:dev:function. Add a quirk to discover controller MMIO register space and configure controller registers to select and address the target secondary device. The quirk will only be applied for X-Gene PCIe MCFG table with OEM revison 1, 2, 3 or 4 (PCIe controller v1 and v2 on X-Gene SoCs). Tested-by: Jon Masters <jcm@redhat.com> Signed-off-by: Duc Dang <dhdang@apm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-06PCI: Add MCFG quirks for Cavium ThunderX pass1.x host controllerTomasz Nowicki
ThunderX pass1.x requires to emulate the EA headers for on-chip devices hence it has to use custom pci_thunder_ecam_ops for accessing PCI config space (pci-thunder-ecam.c). Add new entries to MCFG quirk array where it can be applied while probing ACPI based PCI host controller. ThunderX pass1.x is using the same way for accessing off-chip devices (so-called PEM) as silicon pass-2.x so we need to add PEM quirk entries too. Quirk is considered for ThunderX silicon pass1.x only which is identified via MCFG revision 2. ThunderX pass 1.x requires the following accessors: NUMA node 0 PCI segments 0- 3: pci_thunder_ecam_ops (MCFG quirk) NUMA node 0 PCI segments 4- 9: thunder_pem_ecam_ops (MCFG quirk) NUMA node 1 PCI segments 10-13: pci_thunder_ecam_ops (MCFG quirk) NUMA node 1 PCI segments 14-19: thunder_pem_ecam_ops (MCFG quirk) [bhelgaas: change Makefile/ifdefs so quirk doesn't depend on CONFIG_PCI_HOST_THUNDER_ECAM] Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-06PCI: Add MCFG quirks for Cavium ThunderX pass2.x host controllerTomasz Nowicki
ThunderX PCIe controller to off-chip devices (so-called PEM) is not fully compliant with ECAM standard. It uses non-standard configuration space accessors (see thunder_pem_ecam_ops) and custom configuration space granulation (see bus_shift = 24). In order to access configuration space and probe PEM as ACPI-based PCI host controller we need to add MCFG quirk infrastructure. This involves: 1. A new thunder_pem_acpi_init() init function to locate PEM-specific register ranges using ACPI. 2. Export PEM thunder_pem_ecam_ops structure so it is visible to MCFG quirk code. 3. New quirk entries for each PEM segment. Each contains platform IDs, mentioned thunder_pem_ecam_ops and CFG resources. Quirk is considered for ThunderX silicon pass2.x only which is identified via MCFG revision 1. ThunderX pass 2.x requires the following accessors: NUMA Node 0 PCI segments 0- 3: pci_generic_ecam_ops (ECAM-compliant) NUMA Node 0 PCI segments 4- 9: thunder_pem_ecam_ops (MCFG quirk) NUMA Node 1 PCI segments 10-13: pci_generic_ecam_ops (ECAM-compliant) NUMA Node 1 PCI segments 14-19: thunder_pem_ecam_ops (MCFG quirk) [bhelgaas: adapt to use acpi_get_rc_resources(), update Makefile/ifdefs so quirk doesn't depend on CONFIG_PCI_HOST_THUNDER_PEM] Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-06PCI: thunder-pem: Factor out resource lookupBjorn Helgaas
Pull the register resource lookup out of thunder_pem_init() so we can easily add a corresponding lookup using ACPI. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-06PCI: Add MCFG quirks for HiSilicon Hip05/06/07 host controllersDongdong Liu
The PCIe controller in Hip05/Hip06/Hip07 SoCs is not completely ECAM-compliant. It is non-ECAM only for the RC bus config space; for any other bus underneath the root bus it does support ECAM access. Add specific quirks for PCI config space accessors. This involves: 1. New initialization call hisi_pcie_init() to obtain RC base addresses from PNP0C02 at the root of the ACPI namespace (under \_SB). 2. New entry in common quirk array. [bhelgaas: move to pcie-hisi.c and change Makefile/ifdefs so quirk doesn't depend on CONFIG_PCI_HISI] Signed-off-by: Dongdong Liu <liudongdong3@huawei.com> Signed-off-by: Gabriele Paoloni <gabriele.paoloni@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-06PCI: Add MCFG quirks for Qualcomm QDF2432 host controllerChristopher Covington
The Qualcomm Technologies QDF2432 SoC does not support accesses smaller than 32 bits to the PCI configuration space. Register the appropriate quirk. [bhelgaas: add QCOM_ECAM32 macro, ifdef for ACPI and PCI_QUIRKS] Signed-off-by: Christopher Covington <cov@codeaurora.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-06PCI/ACPI: Provide acpi_get_rc_resources() for ARM64 platformDongdong Liu
The acpi_get_rc_resources() is used to get the RC register address that can not be described in MCFG. It takes the _HID & segment to look for and outputs the RC address resource. Use PNP0C02 devices to describe such RC address resource. Use _UID to match segment to tell which root bus the PNP0C02 resource belongs to. [bhelgaas: add dev argument, wrap in #ifdef CONFIG_PCI_QUIRKS] Signed-off-by: Dongdong Liu <liudongdong3@huawei.com> Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-06PCI/ACPI: Check for platform-specific MCFG quirksTomasz Nowicki
The PCIe spec (r3.0, sec 7.2.2) specifies an "Enhanced Configuration Access Mechanism" (ECAM) for memory-mapped access to configuration space. ECAM is required for PCIe systems unless there's a standard firmware interface for config access. In the absence of a firmware interface, we use pci_generic_ecam_ops, and on ACPI systems, we discover the ECAM space via the MCFG table and/or the _CBA method. Unfortunately some systems provide MCFG but don't implement ECAM according to spec, so we need a mechanism for quirks to make those systems work. Add an MCFG quirk mechanism to override the config accessor functions and/or the memory-mapped address space. A quirk is selected if it matches all of the following: - OEM ID - OEM Table ID - OEM Revision - PCI segment (from _SEG) - PCI bus number range (from _CRS, wildcard allowed) If the quirk specifies config accessor functions or a memory-mapped address range, these override the defaults. [bhelgaas: changelog, reorder quirk matching, fix oem_revision typo per Duc, add under #ifdef CONFIG_PCI_QUIRKS] Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Signed-off-by: Dongdong Liu <liudongdong3@huawei.com> Signed-off-by: Christopher Covington <cov@codeaurora.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-06PCI/ACPI: Extend pci_mcfg_lookup() to return ECAM config accessorsTomasz Nowicki
pci_mcfg_lookup() is the external interface to the generic MCFG code. Previously it merely looked up the ECAM base address for a given domain and bus range. We want a way to add MCFG quirks, some of which may require special config accessors and adjustments to the ECAM address range. Extend pci_mcfg_lookup() so it can return a pointer to a pci_ecam_ops structure and a struct resource for the ECAM address space. For now, it always returns &pci_generic_ecam_ops (the standard accessor) and the resource described by the MCFG. No functional changes intended. [bhelgaas: changelog] Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-06arm64: PCI: Exclude ACPI "consumer" resources from host bridge windowsBjorn Helgaas
On x86 and ia64, we have treated all ACPI _CRS resources of PNP0A03 host bridge devices as "producers", i.e., as host bridge windows. That's partly because some x86 BIOSes improperly used "consumer" descriptors to describe windows and partly because Linux didn't have good support for handling consumer and producer descriptors differently. One result is that x86 BIOSes describe host bridge "consumer" resources in the _CRS of a PNP0C02 device, not the PNP0A03 device itself. On arm64 we don't have a legacy of firmware that has this consumer/producer confusion, so we can handle PNP0A03 "consumer" descriptors as host bridge registers instead of windows. Exclude non-window ("consumer") resources from the list of host bridge windows. This allows the use of "consumer" PNP0A03 descriptors for bridge register space. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-12-06arm64: PCI: Manage controller-specific data on per-controller basisTomasz Nowicki
Currently we use one shared global acpi_pci_root_ops structure to keep controller-specific ops. We pass its pointer to acpi_pci_root_create() and associate it with a host bridge instance for good. Such a design implies serious drawback. Any potential manipulation on the single system-wide acpi_pci_root_ops leads to kernel crash. The structure content is not really changing even across multiple host bridges creation; thus it was not an issue so far. In preparation for adding ECAM quirks mechanism (where controller-specific PCI ops may be different for each host bridge) allocate new acpi_pci_root_ops and fill in with data for each bridge. Now it is safe to have different controller-specific info. As a consequence free acpi_pci_root_ops when host bridge is released. No functional changes in this patch. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2016-12-06arm64: PCI: Search ACPI namespace to ensure ECAM space is reservedBjorn Helgaas
The static MCFG table tells us the base of ECAM space, but it does not reserve the space -- the reservation should be done via a device in the ACPI namespace whose _CRS includes the ECAM region. Use acpi_resource_consumer() to check whether the ECAM space is reserved by an ACPI namespace device. If it is, emit a message showing which device reserves it. If not, emit a "[Firmware Bug]" warning. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2016-12-06arm64: PCI: Add local struct device pointersBjorn Helgaas
Use a local "struct device *dev" for brevity. No functional change intended. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2016-12-01ACPI: Add acpi_resource_consumer() to find device that claims a resourceBjorn Helgaas
Add acpi_resource_consumer(). This takes a struct resource and searches the ACPI namespace for a device whose current resource settings (_CRS) includes the resource. It returns the device if it exists, or NULL if no device uses the resource. If more than one device uses the resource (this may happen in the case of bridges), acpi_resource_consumer() returns the first one found by acpi_get_devices() in its modified depth-first walk of the namespace. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-23PCI: cpqphp: Add missing call to pci_disable_device()Quentin Lambert
Most error branches following the call to pci_enable_device() contain a call to pci_disable_device(). Add these calls where they are missing. This issue was found with Hector. Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-11-21PCI: Warn on possible RW1C corruption for sub-32 bit config writesBjorn Helgaas
Hardware that supports only 32-bit config writes is not spec-compliant. For example, if software performs a 16-bit write, we must do a 32-bit read, merge in the 16 bits we intend to write, followed by a 32-bit write. If the 16 bits we *don't* intend to write happen to have any RW1C (write-one- to-clear) bits set, we just inadvertently cleared something we shouldn't have. Add a rate-limited warning when we do sub-32 bit config writes. Remove similar probe-time warnings from some of the affected host bridge drivers. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Enthusiastically-Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Shawn Lin <shawn.lin@rock-chips.com> # rockchip Acked-by: Thierry Reding <treding@nvidia.com>
2016-11-21PCI: Create revision file in sysfsEmil Velikov
Currently the revision isn't available via sysfs/libudev thus if one wants to know the value one needs to read through the config file, which can be quite time-consuming because it wakes/powers up the device. There are at least two userspace components which could make use the new file: libpciaccess and libdrm. The former wakes up _every_ PCI device, which can be observed via glxinfo when using Mesa 10.0+ drivers. The latter, in association with Mesa 13.0, can lead to 2-3 second delays while starting firefox, thunderbird or chromium. Link: https://bugs.freedesktop.org/show_bug.cgi?id=98502 Tested-by: Mauro Santos <registo.mailling@gmail.com> Signed-off-by: Emil Velikov <emil.velikov@collabora.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch CC: Greg KH <gregkh@linuxfoundation.org>
2016-11-14PCI/ASPM: Use permission-specific DEVICE_ATTR variantsJulia Lawall
Use DEVICE_ATTR_RW for read-write attributes. This simplifies the source code, improves readability, and reduces the chance of inconsistencies. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @rw@ declarer name DEVICE_ATTR; identifier x,x_show,x_store; @@ DEVICE_ATTR(x, \(0644\|S_IRUGO|S_IWUSR\), x_show, x_store); @script:ocaml@ x << rw.x; x_show << rw.x_show; x_store << rw.x_store; @@ if not (x^"_show" = x_show && x^"_store" = x_store) then Coccilib.include_match false @@ declarer name DEVICE_ATTR_RW; identifier rw.x,rw.x_show,rw.x_store; @@ - DEVICE_ATTR(x, \(0644\|S_IRUGO|S_IWUSR\), x_show, x_store); + DEVICE_ATTR_RW(x); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2016-10-15Linux 4.9-rc1v4.9-rc1Linus Torvalds
2016-10-15Merge tag 'befs-v4.9-rc1' of git://github.com/luisbg/linux-befsLinus Torvalds
Pull befs fixes from Luis de Bethencourt: "I recently took maintainership of the befs file system [0]. This is the first time I send you a git pull request, so please let me know if all the below is OK. Salah Triki and myself have been cleaning the code and fixing a few small bugs. Sorry I couldn't send this sooner in the merge window, I was waiting to have my GPG key signed by kernel members at ELCE in Berlin a few days ago." [0] https://lkml.org/lkml/2016/7/27/502 * tag 'befs-v4.9-rc1' of git://github.com/luisbg/linux-befs: (39 commits) befs: befs: fix style issues in datastream.c befs: improve documentation in datastream.c befs: fix typos in datastream.c befs: fix typos in btree.c befs: fix style issues in super.c befs: fix comment style befs: add check for ag_shift in superblock befs: dump inode_size superblock information befs: remove unnecessary initialization befs: fix typo in befs_sb_info befs: add flags field to validate superblock state befs: fix typo in befs_find_key befs: remove unused BEFS_BT_PARMATCH fs: befs: remove ret variable fs: befs: remove in vain variable assignment fs: befs: remove unnecessary *befs_sb variable fs: befs: remove useless initialization to zero fs: befs: remove in vain variable assignment fs: befs: Insert NULL inode to dentry fs: befs: Remove useless calls to brelse in befs_find_brun_dblindirect ...
2016-10-15Merge tag 'gcc-plugins-v4.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull gcc plugins update from Kees Cook: "This adds a new gcc plugin named "latent_entropy". It is designed to extract as much possible uncertainty from a running system at boot time as possible, hoping to capitalize on any possible variation in CPU operation (due to runtime data differences, hardware differences, SMP ordering, thermal timing variation, cache behavior, etc). At the very least, this plugin is a much more comprehensive example for how to manipulate kernel code using the gcc plugin internals" * tag 'gcc-plugins-v4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: latent_entropy: Mark functions with __latent_entropy gcc-plugins: Add latent_entropy plugin
2016-10-15Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "This is the main MIPS pull request for 4.9: MIPS core arch code: - traps: 64bit kernels should read CP0_EBase 64bit - traps: Convert ebase to KSEG0 - c-r4k: Drop bc_wback_inv() from icache flush - c-r4k: Split user/kernel flush_icache_range() - cacheflush: Use __flush_icache_user_range() - uprobes: Flush icache via kernel address - KVM: Use __local_flush_icache_user_range() - c-r4k: Fix flush_icache_range() for EVA - Fix -mabi=64 build of vdso.lds - VDSO: Drop duplicated -I*/-E* aflags - tracing: move insn_has_delay_slot to a shared header - tracing: disable uprobe/kprobe on compact branch instructions - ptrace: Fix regs_return_value for kernel context - Squash lines for simple wrapper functions - Move identification of VP(E) into proc.c from smp-mt.c - Add definitions of SYNC barrierstype values - traps: Ensure full EBase is written - tlb-r4k: If there are wired entries, don't use TLBINVF - Sanitise coherentio semantics - dma-default: Don't check hw_coherentio if device is non-coherent - Support per-device DMA coherence - Adjust MIPS64 CAC_BASE to reflect Config.K0 - Support generating Flattened Image Trees (.itb) - generic: Introduce generic DT-based board support - generic: Convert SEAD-3 to a generic board - Enable hardened usercopy - Don't specify STACKPROTECTOR in defconfigs Octeon: - Delete dead code and files across the platform. - Change to use all memory into use by default. - Rename upper case variables in setup code to lowercase. - Delete legacy hack for broken bootloaders. - Leave maintaining the link state to the actual ethernet/PHY drivers. - Add DTS for D-Link DSR-500N. - Fix PCI interrupt routing on D-Link DSR-500N. Pistachio: - Remove ANDROID_TIMED_OUTPUT from defconfig TX39xx: - Move GPIO setup from .mem_setup() to .arch_init() - Convert to Common Clock Framework TX49xx: - Move GPIO setup from .mem_setup() to .arch_init() - Convert to Common Clock Framework txx9wdt: - Add missing clock (un)prepare calls for CCF BMIPS: - Add PW, GPIO SDHCI and NAND device node names - Support APPENDED_DTB - Add missing bcm97435svmb to DT_NONE - Rename bcm96358nb4ser to bcm6358-neufbox4-sercom - Add DT examples for BCM63268, BCM3368 and BCM6362 - Add support for BCM3368 and BCM6362 PCI - Reduce stack frame usage - Use struct list_head lists - Support for CONFIG_PCI_DOMAINS_GENERIC - Make pcibios_set_cache_line_size an initcall - Inline pcibios_assign_all_busses - Split pci.c into pci.c & pci-legacy.c - Introduce CONFIG_PCI_DRIVERS_LEGACY - Support generic drivers CPC - Convert bare 'unsigned' to 'unsigned int' - Avoid lock when MIPS CM >= 3 is present GIC: - Delete unused file smp-gic.c mt7620: - Delete unnecessary assignment for the field "owner" from PCI BCM63xx: - Let clk_disable() return immediately if clk is NULL pm-cps: - Change FSB workaround to CPU blacklist - Update comments on barrier instructions - Use MIPS standard lightweight ordering barrier - Use MIPS standard completion barrier - Remove selection of sync types - Add MIPSr6 CPU support - Support CM3 changes to Coherence Enable Register SMP: - Wrap call to mips_cpc_lock_other in mips_cm_lock_other - Introduce mechanism for freeing and allocating IPIs cpuidle: - cpuidle-cps: Enable use with MIPSr6 CPUs. SEAD3: - Rewrite to use DT and generic kernel feature. USB: - host: ehci-sead3: Remove SEAD-3 EHCI code FBDEV: - cobalt_lcdfb: Drop SEAD3 support dt-bindings: - Document a binding for simple ASCII LCDs auxdisplay: - img-ascii-lcd: driver for simple ASCII LCD displays irqchip i8259: - i8259: Add domain before mapping parent irq - i8259: Allow platforms to override poll function - i8259: Remove unused i8259A_irq_pending Malta: - Rewrite to use DT of/platform: - Probe "isa" busses by default CM: - Print CM error reports upon bus errors Module: - Migrate exception table users off module.h and onto extable.h - Make various drivers explicitly non-modular: - Audit and remove any unnecessary uses of module.h mailmap: - Canonicalize to Qais' current email address. Documentation: - MIPS supports HAVE_REGS_AND_STACK_ACCESS_API Loongson1C: - Add CPU support for Loongson1C - Add board support - Add defconfig - Add RTC support for Loongson1C board All this except one Documentation fix has sat in linux-next and has survived Imagination's automated build test system" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (127 commits) Documentation: MIPS supports HAVE_REGS_AND_STACK_ACCESS_API MIPS: ptrace: Fix regs_return_value for kernel context MIPS: VDSO: Drop duplicated -I*/-E* aflags MIPS: Fix -mabi=64 build of vdso.lds MIPS: Enable hardened usercopy MIPS: generic: Convert SEAD-3 to a generic board MIPS: generic: Introduce generic DT-based board support MIPS: Support generating Flattened Image Trees (.itb) MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0 MIPS: Print CM error reports upon bus errors MIPS: Support per-device DMA coherence MIPS: dma-default: Don't check hw_coherentio if device is non-coherent MIPS: Sanitise coherentio semantics MIPS: PCI: Support generic drivers MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY MIPS: PCI: Split pci.c into pci.c & pci-legacy.c MIPS: PCI: Inline pcibios_assign_all_busses MIPS: PCI: Make pcibios_set_cache_line_size an initcall MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC MIPS: PCI: Use struct list_head lists ...
2016-10-15Merge tag 'sound-fix-4.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Just a few trivial small fixes" * tag 'sound-fix-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: line6: fix a crash in line6_hwdep_write() ALSA: seq: fix passing wrong pointer in function call of compatibility layer ALSA: hda - Fix a failure of micmute led when having multi adcs ALSA: line6: Fix POD X3 Live audio input
2016-10-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull more misc uaccess and vfs updates from Al Viro: "The rest of the stuff from -next (more uaccess work) + assorted fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: score: traps: Add missing include file to fix build error fs/super.c: don't fool lockdep in freeze_super() and thaw_super() paths fs/super.c: fix race between freeze_super() and thaw_super() overlayfs: Fix setting IOP_XATTR flag iov_iter: kernel-doc import_iovec() and rw_copy_check_uvector() blackfin: no access_ok() for __copy_{to,from}_user() arm64: don't zero in __copy_from_user{,_inatomic} arm: don't zero in __copy_from_user_inatomic()/__copy_from_user() arc: don't leak bits of kernel stack into coredump alpha: get rid of tail-zeroing in __copy_user()
2016-10-14Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs fixes from Steve French: "Including: - nine bug fixes for stable. Some of these we found at the recent two weeks of SMB3 test events/plugfests. - significant improvements in reconnection (e.g. if server or network crashes) especially when mounted with "persistenthandles" or to server which advertises Continuous Availability on the share. - a new mount option "idsfromsid" which improves POSIX compatibility in some cases (when winbind not configured e.g.) by better (and faster) fetching uid/gid from acl (when "cifsacl" mount option is enabled). NB: we are almost complete work on "cifsacl" (querying mode/uid/gid from ACL) for SMB3, but SMB3 support for cifsacl is not included in this set. - improved handling for SMB3 "credits" (even if server is buggy) Still working on two sets of changes: - cifsacl enablement for SMB3 - cleanup of RFC1001 length calculation (so we can handle encryption and multichannel and RDMA) And a couple of new bugs were reported recently (unrelated to above) so will probably have another merge request next week" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: (21 commits) CIFS: Retrieve uid and gid from special sid if enabled CIFS: Add new mount option to set owner uid and gid from special sids in acl CIFS: Reset read oplock to NONE if we have mandatory locks after reopen CIFS: Fix persistent handles re-opening on reconnect SMB2: Separate RawNTLMSSP authentication from SMB2_sess_setup SMB2: Separate Kerberos authentication from SMB2_sess_setup Expose cifs module parameters in sysfs Cleanup missing frees on some ioctls Enable previous version support Do not send SMB3 SET_INFO request if nothing is changing SMB3: Add mount parameter to allow user to override max credits fs/cifs: reopen persistent handles on reconnect Clarify locking of cifs file and tcon structures and make more granular Fix regression which breaks DFS mounting fs/cifs: keep guid when assigning fid to fileinfo SMB3: GUIDs should be constructed as random but valid uuids Set previous session id correctly on SMB3 reconnect cifs: Limit the overall credit acquired Display number of credits available Add way to query creation time of file via cifs xattr ...
2016-10-14Merge branch 'for-linus-4.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "Some fixes from Omar and Dave Sterba for our new free space tree. This isn't heavily used yet, but as we move toward making it the new default we wanted to nail down an endian bug" * 'for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: tests: uninline member definitions in free_space_extent btrfs: tests: constify free space extent specs Btrfs: expand free space tree sanity tests to catch endianness bug Btrfs: fix extent buffer bitmap tests on big-endian systems Btrfs: catch invalid free space trees Btrfs: fix mount -o clear_cache,space_cache=v2 Btrfs: fix free space tree bitmaps on big-endian systems
2016-10-14Merge branch 'work.uaccess' into for-linusAl Viro
2016-10-14score: traps: Add missing include file to fix build errorGuenter Roeck
score images fail to build as follows. arch/score/kernel/traps.c: In function 'show_stack': arch/score/kernel/traps.c:55:3: error: implicit declaration of function '__get_user' __get_user() is declared in asm/uaccess.h, which was previously included through asm/module.h. Cc: Al Viro <viro@zeniv.linux.org.uk> Fixes: 88dd4a748da7 ("score: separate extable.h, switch module.h to it") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-10-14fs/super.c: don't fool lockdep in freeze_super() and thaw_super() pathsOleg Nesterov
sb_wait_write()->percpu_rwsem_release() fools lockdep to avoid the false-positives. Now that xfs was fixed by Dave's commit dbad7c993053 ("xfs: stop holding ILOCK over filldir callbacks") we can remove it and change freeze_super() and thaw_super() to run with s_writers.rw_sem locks held; we add two trivial helpers for that, lockdep_sb_freeze_release() and lockdep_sb_freeze_acquire(). xfstests-dev/check `grep -il freeze tests/*/???` does not trigger any warning from lockdep. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-10-14Merge branch 'overlayfs-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull overlayfs updates from Miklos Szeredi: "This update contains fixes to the "use mounter's permission to access underlying layers" area, and miscellaneous other fixes and cleanups. No new features this time" * 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: use vfs_get_link() vfs: add vfs_get_link() helper ovl: use generic_readlink ovl: explain error values when removing acl from workdir ovl: Fix info leak in ovl_lookup_temp() ovl: during copy up, switch to mounter's creds early ovl: lookup: do getxattr with mounter's permission ovl: copy_up_xattr(): use strnlen
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 06:02:03 +0000