summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-08-06ext4: skip non-loaded groups at cr=0/1 when scanning for good groupsAlex Zhuravlev
cr=0 is supposed to be an optimization to save CPU cycles, but if buddy data (in memory) is not initialized then all this makes no sense as we have to do sync IO taking a lot of cycles. Also, at cr=0 mballoc doesn't choose any available chunk. cr=1 also skips groups using heuristic based on avg. fragment size. It's more useful to skip such groups and switch to cr=2 where groups will be scanned for available chunks. However, we always read the first block group in a flex_bg so metadata blocks will get read into the first flex_bg if possible. Using sparse image and dm-slow virtual device of 120TB was simulated, then the image was formatted and filled using debugfs to mark ~85% of available space as busy. mount process w/o the patch couldn't complete in half an hour (according to vmstat it would take ~10-11 hours). With the patch applied mount took ~20 seconds. Lustre-bug-id: https://jira.whamcloud.com/browse/LU-12988 Signed-off-by: Alex Zhuravlev <azhuravlev@whamcloud.com> Reviewed-by: Andreas Dilger <adilger@whamcloud.com> Reviewed-by: Artem Blagodarenko <artem.blagodarenko@gmail.com>
2020-08-06ext4: add prefetching for block allocation bitmapsAlex Zhuravlev
This should significantly improve bitmap loading, especially for flex groups as it tries to load all bitmaps within a flex.group instead of one by one synchronously. Prefetching is done in 8 * flex_bg groups, so it should be 8 read-ahead reads for a single allocating thread. At the end of allocation the thread waits for read-ahead completion and initializes buddy information so that read-aheads are not lost in case of memory pressure. At cr=0 the number of prefetching IOs is limited per allocation context to prevent a situation when mballoc loads thousands of bitmaps looking for a perfect group and ignoring groups with good chunks. Together with the patch "ext4: limit scanning of uninitialized groups" the mount time (which includes few tiny allocations) of a 1PB filesystem is reduced significantly: 0% full 50%-full unpatched patched mount time 33s 9279s 563s [ Restructured by tytso; removed the state flags in the allocation context, so it can be used to lazily prefetch the allocation bitmaps immediately after the file system is mounted. Skip prefetching block groups which are uninitialized. Finally pass in the REQ_RAHEAD flag to the block layer while prefetching. ] Signed-off-by: Alex Zhuravlev <bzzz@whamcloud.com> Reviewed-by: Andreas Dilger <adilger@whamcloud.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-08-06ext4: handle read only external journal deviceLukas Czerner
Ext4 uses blkdev_get_by_dev() to get the block_device for journal device which does check to see if the read-only block device was opened read-only. As a result ext4 will hapily proceed mounting the file system with external journal on read-only device. This is bad as we would not be able to use the journal leading to errors later on. Instead of simply failing to mount file system in this case, treat it in a similar way we treat internal journal on read-only device. Allow to mount with -o noload in read-only mode. This can be reproduced easily like this: mke2fs -F -O journal_dev $JOURNAL_DEV 100M mkfs.$FSTYPE -F -J device=$JOURNAL_DEV $FS_DEV blockdev --setro $JOURNAL_DEV mount $FS_DEV $MNT touch $MNT/file umount $MNT leading to error like this [ 1307.318713] ------------[ cut here ]------------ [ 1307.323362] generic_make_request: Trying to write to read-only block-device dm-2 (partno 0) [ 1307.331741] WARNING: CPU: 36 PID: 3224 at block/blk-core.c:855 generic_make_request_checks+0x2c3/0x580 [ 1307.341041] Modules linked in: ext4 mbcache jbd2 rfkill intel_rapl_msr intel_rapl_common isst_if_commd [ 1307.419445] CPU: 36 PID: 3224 Comm: jbd2/dm-2 Tainted: G W I 5.8.0-rc5 #2 [ 1307.427359] Hardware name: Dell Inc. PowerEdge R740/01KPX8, BIOS 2.3.10 08/15/2019 [ 1307.434932] RIP: 0010:generic_make_request_checks+0x2c3/0x580 [ 1307.440676] Code: 94 03 00 00 48 89 df 48 8d 74 24 08 c6 05 cf 2b 18 01 01 e8 7f a4 ff ff 48 c7 c7 50e [ 1307.459420] RSP: 0018:ffffc0d70eb5fb48 EFLAGS: 00010286 [ 1307.464646] RAX: 0000000000000000 RBX: ffff9b33b2978300 RCX: 0000000000000000 [ 1307.471780] RDX: ffff9b33e12a81e0 RSI: ffff9b33e1298000 RDI: ffff9b33e1298000 [ 1307.478913] RBP: ffff9b7b9679e0c0 R08: 0000000000000837 R09: 0000000000000024 [ 1307.486044] R10: 0000000000000000 R11: ffffc0d70eb5f9f0 R12: 0000000000000400 [ 1307.493177] R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000 [ 1307.500308] FS: 0000000000000000(0000) GS:ffff9b33e1280000(0000) knlGS:0000000000000000 [ 1307.508396] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1307.514142] CR2: 000055eaf4109000 CR3: 0000003dee40a006 CR4: 00000000007606e0 [ 1307.521273] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1307.528407] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1307.535538] PKRU: 55555554 [ 1307.538250] Call Trace: [ 1307.540708] generic_make_request+0x30/0x340 [ 1307.544985] submit_bio+0x43/0x190 [ 1307.548393] ? bio_add_page+0x62/0x90 [ 1307.552068] submit_bh_wbc+0x16a/0x190 [ 1307.555833] jbd2_write_superblock+0xec/0x200 [jbd2] [ 1307.560803] jbd2_journal_update_sb_log_tail+0x65/0xc0 [jbd2] [ 1307.566557] jbd2_journal_commit_transaction+0x2ae/0x1860 [jbd2] [ 1307.572566] ? check_preempt_curr+0x7a/0x90 [ 1307.576756] ? update_curr+0xe1/0x1d0 [ 1307.580421] ? account_entity_dequeue+0x7b/0xb0 [ 1307.584955] ? newidle_balance+0x231/0x3d0 [ 1307.589056] ? __switch_to_asm+0x42/0x70 [ 1307.592986] ? __switch_to_asm+0x36/0x70 [ 1307.596918] ? lock_timer_base+0x67/0x80 [ 1307.600851] kjournald2+0xbd/0x270 [jbd2] [ 1307.604873] ? finish_wait+0x80/0x80 [ 1307.608460] ? commit_timeout+0x10/0x10 [jbd2] [ 1307.612915] kthread+0x114/0x130 [ 1307.616152] ? kthread_park+0x80/0x80 [ 1307.619816] ret_from_fork+0x22/0x30 [ 1307.623400] ---[ end trace 27490236265b1630 ]--- Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20200717090605.2612-1-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-08-06ext4: fix spelling typos in ext4_mb_initialize_contextbrookxu
Fix spelling typos in ext4_mb_initialize_context. Signed-off-by: Chunguang Xu <brookxu@tencent.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/883b523c-58ec-7f38-0bb8-cd2ea4393684@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-08-06ext4: use generic names for generic ioctlsEric Biggers
Don't define EXT4_IOC_* aliases to ioctls that already have a generic FS_IOC_* name. These aliases are unnecessary, and they make it unclear which ioctls are ext4-specific and which are generic. Exception: leave EXT4_IOC_GETVERSION_OLD and EXT4_IOC_SETVERSION_OLD as-is for now, since renaming them to FS_IOC_GETVERSION and FS_IOC_SETVERSION would probably make them more likely to be confused with EXT4_IOC_GETVERSION and EXT4_IOC_SETVERSION which also exist. Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20200714230909.56349-1-ebiggers@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-08-06ext4: don't hardcode bit values in EXT4_FL_USER_*Eric Biggers
Define the EXT4_FL_USER_* constants by OR-ing together the appropriate flags, rather than hard-coding a numeric value. This makes it much easier to see which flags are listed. No change in the actual values. Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20200713031012.192440-1-ebiggers@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-08-06ext4: don't BUG on inconsistent journal featureJan Kara
A customer has reported a BUG_ON in ext4_clear_journal_err() hitting during an LTP testing. Either this has been caused by a test setup issue where the filesystem was being overwritten while LTP was mounting it or the journal replay has overwritten the superblock with invalid data. In either case it is preferable we don't take the machine down with a BUG_ON. So handle the situation of unexpectedly missing has_journal feature more gracefully. We issue warning and fail the mount in the cases where the race window is narrow and the failed check is most likely a programming error. In cases where fs corruption is more likely, we do full ext4_error() handling before failing mount / remount. Reviewed-by: Lukas Czerner <lczerner@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20200710140759.18031-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-08-06ext4: do not block RWF_NOWAIT dio write on unallocated spaceJan Kara
Since commit 378f32bab371 ("ext4: introduce direct I/O write using iomap infrastructure") we don't properly bail out of RWF_NOWAIT direct IO write if underlying blocks are not allocated. Also ext4_dio_write_checks() does not honor RWF_NOWAIT when re-acquiring i_rwsem. Fix both issues. Fixes: 378f32bab371 ("ext4: introduce direct I/O write using iomap infrastructure") Cc: stable@kernel.org Reported-by: Filipe Manana <fdmanana@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/20200708153516.9507-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-08-06ext4: replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Link: https://lore.kernel.org/r/20200706190339.20709-1-grandmaster@al2klimov.de Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-08-06ext4: lost matching-pair of trace in ext4_unlinkYi Zhuang
If dquot_initialize() return non-zero and trace of ext4_unlink_enter/exit enabled then the matching-pair of trace_exit will lost in log. Signed-off-by: Yi Zhuang <zhuangyi1@huawei.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/20200629122621.129953-1-zhuangyi1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-08-06ext4: lost matching-pair of trace in ext4_truncatezhengliang
It should call trace exit in all return path for ext4_truncate. Signed-off-by: zhengliang <zhengliang6@huawei.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/20200701083027.45996-1-zhengliang6@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-08-06jbd2: add the missing unlock_buffer() in the error path of ↵zhangyi (F)
jbd2_write_superblock() jbd2_write_superblock() is under the buffer lock of journal superblock before ending that superblock write, so add a missing unlock_buffer() in in the error path before submitting buffer. Fixes: 742b06b5628f ("jbd2: check superblock mapped prior to committing") Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Cc: stable@kernel.org Link: https://lore.kernel.org/r/20200620061948.2049579-1-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-08-06ext4: fix potential negative array index in do_split()Eric Sandeen
If for any reason a directory passed to do_split() does not have enough active entries to exceed half the size of the block, we can end up iterating over all "count" entries without finding a split point. In this case, count == move, and split will be zero, and we will attempt a negative index into map[]. Guard against this by detecting this case, and falling back to split-to-half-of-count instead; in this case we will still have plenty of space (> half blocksize) in each split block. Fixes: ef2b02d3e617 ("ext34: ensure do_split leaves enough free space in both blocks") Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/f53e246b-647c-64bb-16ec-135383c70ad7@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-08-06jbd2: make sure jh have b_transaction set in refile/unfile_bufferLukas Czerner
Callers of __jbd2_journal_unfile_buffer() and __jbd2_journal_refile_buffer() assume that the b_transaction is set. In fact if it's not, we can end up with journal_head refcounting errors leading to crash much later that might be very hard to track down. Add asserts to make sure that is the case. We also make sure that b_next_transaction is NULL in __jbd2_journal_unfile_buffer() since the callers expect that as well and we should not get into that stage in this state anyway, leading to problems later on if we do. Tested with fstests. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20200617092549.6712-1-lczerner@redhat.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-08-06ext4: fix coding style in file.cDio Putra
Fixed a few coding style issues in file.c Signed-off-by: Dio Putra <dioput12@gmail.com> Link: https://lore.kernel.org/r/239fcd8f-d33f-8621-9e82-0416dd3f9c94@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-08-06ext4: delete unnecessary checks before brelse()Markus Elfring
The brelse() function tests whether its argument is NULL and then returns immediately. Thus remove the tests which are not needed around the shown calls. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/0d713702-072f-a89c-20ec-ca70aa83a432@web.de Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-07-29ext4: fix spelling mistakes in extents.cKeyur Patel
Fix spelling issues over the comments in the code. requsted ==> requested deterimined ==> determined insde ==> inside neet ==> need somthing ==> something Signed-off-by: Keyur Patel <iamkeyur96@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20200611031947.165079-1-iamkeyur96@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-07-05Linux 5.8-rc4v5.8-rc4Linus Torvalds
2020-07-05x86/ldt: use "pr_info_once()" instead of open-coding it badlyLinus Torvalds
Using a mutex for "print this warning only once" is so overdesigned as to be actively offensive to my sensitive stomach. Just use "pr_info_once()" that already does this, although in a (harmlessly) racy manner that can in theory cause the message to be printed twice if more than one CPU races on that "is this the first time" test. [ If somebody really cares about that harmless data race (which sounds very unlikely indeed), that person can trivially fix printk_once() by using a simple atomic access, preferably with an optimistic non-atomic test first before even bothering to treat the pointless "make sure it is _really_ just once" case. A mutex is most definitely never the right primitive to use for something like this. ] Yes, this is a small and meaningless detail in a code path that hardly matters. But let's keep some code quality standards here, and not accept outrageously bad code. Link: https://lore.kernel.org/lkml/CAHk-=wgV9toS7GU3KmNpj8hCS9SeF+A0voHS8F275_mgLhL4Lw@mail.gmail.com/ Cc: Andy Lutomirski <luto@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-05Merge tag 'x86-urgent-2020-07-05' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A series of fixes for x86: - Reset MXCSR in kernel_fpu_begin() to prevent using a stale user space value. - Prevent writing MSR_TEST_CTRL on CPUs which are not explicitly whitelisted for split lock detection. Some CPUs which do not support it crash even when the MSR is written to 0 which is the default value. - Fix the XEN PV fallout of the entry code rework - Fix the 32bit fallout of the entry code rework - Add more selftests to ensure that these entry problems don't come back. - Disable 16 bit segments on XEN PV. It's not supported because XEN PV does not implement ESPFIX64" * tag 'x86-urgent-2020-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ldt: Disable 16-bit segments on Xen PV x86/entry/32: Fix #MC and #DB wiring on x86_32 x86/entry/xen: Route #DB correctly on Xen PV x86/entry, selftests: Further improve user entry sanity checks x86/entry/compat: Clear RAX high bits on Xen PV SYSENTER selftests/x86: Consolidate and fix get/set_eflags() helpers selftests/x86/syscall_nt: Clear weird flags after each test selftests/x86/syscall_nt: Add more flag combinations x86/entry/64/compat: Fix Xen PV SYSENTER frame setup x86/entry: Move SYSENTER's regs->sp and regs->flags fixups into C x86/entry: Assert that syscalls are on the right stack x86/split_lock: Don't write MSR_TEST_CTRL on CPUs that aren't whitelisted x86/fpu: Reset MXCSR to default in kernel_fpu_begin()
2020-07-05Merge tag 'irq-urgent-2020-07-05' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of interrupt chip driver fixes: - Ensure the atomicity of affinity updates in the GIC driver - Don't try to sleep in atomic context when waiting for the GICv4.1 to respond. Use polling instead. - Typo fixes in Kconfig and warnings" * tag 'irq-urgent-2020-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic: Atomically update affinity irqchip/riscv-intc: Fix a typo in a pr_warn() irqchip/gic-v4.1: Use readx_poll_timeout_atomic() to fix sleep in atomic irqchip/loongson-pci-msi: Fix a typo in Kconfig
2020-07-05Merge tag 'core-urgent-2020-07-05' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull rcu fixlet from Thomas Gleixner: "A single fix for a printk format warning in RCU" * tag 'core-urgent-2020-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rcuperf: Fix printk format warning
2020-07-05Merge tag 'kbuild-fixes-v5.8-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes frin Masahiro Yamada: - fix various bugs in xconfig - fix some issues in cross-compilation using Clang - fix documentation * tag 'kbuild-fixes-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: .gitignore: Do not track `defconfig` from `make savedefconfig` kbuild: make Clang build userprogs for target architecture kbuild: fix CONFIG_CC_CAN_LINK(_STATIC) for cross-compilation with Clang kconfig: qconf: parse newer types at debug info kconfig: qconf: navigate menus on hyperlinks kconfig: qconf: don't show goback button on splitMode kconfig: qconf: simplify the goBack() logic kconfig: qconf: re-implement setSelected() kconfig: qconf: make debug links work again kconfig: qconf: make search fully work again on split mode kconfig: qconf: cleanup includes docs: kbuild: fix ReST formatting gcc-plugins: fix gcc-plugins directory path in documentation
2020-07-05Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Four small fixes in three drivers. The mptfusion one has actually caused user visible issues in certain kernel configurations" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: mptfusion: Don't use GFP_ATOMIC for larger DMA allocations scsi: libfc: Skip additional kref updating work event scsi: libfc: Handling of extra kref scsi: qla2xxx: Fix a condition in qla2x00_find_all_fabric_devs()
2020-07-05Merge tag 'block-5.8-2020-07-05' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - NVMe fixes from Christoph: - Fix crash in multi-path disk add (Christoph) - Fix ignore of identify error (Sagi) - Fix a compiler complaint that a function should be static (Wei) * tag 'block-5.8-2020-07-05' of git://git.kernel.dk/linux-block: block: make function __bio_integrity_free() static nvme: fix a crash in nvme_mpath_add_disk nvme: fix identify error status silent ignore
2020-07-05Merge tag 'io_uring-5.8-2020-07-05' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull io_uring fix from Jens Axboe: "Andres reported a regression with the fix that was merged earlier this week, where his setup of using signals to interrupt io_uring CQ waits no longer worked correctly. Fix this, and also limit our use of TWA_SIGNAL to the case where we need it, and continue using TWA_RESUME for task_work as before. Since the original is marked for 5.7 stable, let's flush this one out early" * tag 'io_uring-5.8-2020-07-05' of git://git.kernel.dk/linux-block: io_uring: fix regression with always ignoring signals in io_cqring_wait()
2020-07-05Merge branch 'i2c/for-current' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "The usual driver fixes and documentation updates" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: mlxcpld: check correct size of maximum RECV_LEN packet i2c: add Kconfig help text for slave mode i2c: slave-eeprom: update documentation i2c: eg20t: Load module automatically if ID matches i2c: designware: platdrv: Set class based on DMI i2c: algo-pca: Add 0x78 as SCL stuck low status for PCA9665
2020-07-05Merge tag 'mips_fixes_5.8_1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: - fix for missing hazard barrier - DT fix for ingenic - DT fix of GPHY names for lantiq - fix usage of smp_processor_id() while preemption is enabled * tag 'mips_fixes_5.8_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Do not use smp_processor_id() in preemptible code MIPS: Add missing EHB in mtc0 -> mfc0 sequence for DSPen MIPS: ingenic: gcw0: Fix HP detection GPIO. MIPS: lantiq: xway: sysctrl: fix the GPHY clock alias names
2020-07-05MIPS: Do not use smp_processor_id() in preemptible codeXingxing Su
Use preempt_disable() to fix the following bug under CONFIG_DEBUG_PREEMPT. [ 21.915305] BUG: using smp_processor_id() in preemptible [00000000] code: qemu-system-mip/1056 [ 21.923996] caller is do_ri+0x1d4/0x690 [ 21.927921] CPU: 0 PID: 1056 Comm: qemu-system-mip Not tainted 5.8.0-rc2 #3 [ 21.934913] Stack : 0000000000000001 ffffffff81370000 ffffffff8071cd60 a80f926d5ac95694 [ 21.942984] a80f926d5ac95694 0000000000000000 98000007f0043c88 ffffffff80f2fe40 [ 21.951054] 0000000000000000 0000000000000000 0000000000000001 0000000000000000 [ 21.959123] ffffffff802d60cc 98000007f0043dd8 ffffffff81f4b1e8 ffffffff81f60000 [ 21.967192] ffffffff81f60000 ffffffff80fe0000 ffff000000000000 0000000000000000 [ 21.975261] fffffffff500cce1 0000000000000001 0000000000000002 0000000000000000 [ 21.983331] ffffffff80fe1a40 0000000000000006 ffffffff8077f940 0000000000000000 [ 21.991401] ffffffff81460000 98000007f0040000 98000007f0043c80 000000fffba8cf20 [ 21.999471] ffffffff8071cd60 0000000000000000 0000000000000000 0000000000000000 [ 22.007541] 0000000000000000 0000000000000000 ffffffff80212ab4 a80f926d5ac95694 [ 22.015610] ... [ 22.018086] Call Trace: [ 22.020562] [<ffffffff80212ab4>] show_stack+0xa4/0x138 [ 22.025732] [<ffffffff8071cd60>] dump_stack+0xf0/0x150 [ 22.030903] [<ffffffff80c73f5c>] check_preemption_disabled+0xf4/0x100 [ 22.037375] [<ffffffff80213b84>] do_ri+0x1d4/0x690 [ 22.042198] [<ffffffff8020b828>] handle_ri_int+0x44/0x5c [ 24.359386] BUG: using smp_processor_id() in preemptible [00000000] code: qemu-system-mip/1072 [ 24.368204] caller is do_ri+0x1a8/0x690 [ 24.372169] CPU: 4 PID: 1072 Comm: qemu-system-mip Not tainted 5.8.0-rc2 #3 [ 24.379170] Stack : 0000000000000001 ffffffff81370000 ffffffff8071cd60 a80f926d5ac95694 [ 24.387246] a80f926d5ac95694 0000000000000000 98001007ef06bc88 ffffffff80f2fe40 [ 24.395318] 0000000000000000 0000000000000000 0000000000000001 0000000000000000 [ 24.403389] ffffffff802d60cc 98001007ef06bdd8 ffffffff81f4b818 ffffffff81f60000 [ 24.411461] ffffffff81f60000 ffffffff80fe0000 ffff000000000000 0000000000000000 [ 24.419533] fffffffff500cce1 0000000000000001 0000000000000002 0000000000000000 [ 24.427603] ffffffff80fe0000 0000000000000006 ffffffff8077f940 0000000000000020 [ 24.435673] ffffffff81460020 98001007ef068000 98001007ef06bc80 000000fffbbbb370 [ 24.443745] ffffffff8071cd60 0000000000000000 0000000000000000 0000000000000000 [ 24.451816] 0000000000000000 0000000000000000 ffffffff80212ab4 a80f926d5ac95694 [ 24.459887] ... [ 24.462367] Call Trace: [ 24.464846] [<ffffffff80212ab4>] show_stack+0xa4/0x138 [ 24.470029] [<ffffffff8071cd60>] dump_stack+0xf0/0x150 [ 24.475208] [<ffffffff80c73f5c>] check_preemption_disabled+0xf4/0x100 [ 24.481682] [<ffffffff80213b58>] do_ri+0x1a8/0x690 [ 24.486509] [<ffffffff8020b828>] handle_ri_int+0x44/0x5c Signed-off-by: Xingxing Su <suxingxing@loongson.cn> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-07-05MIPS: Add missing EHB in mtc0 -> mfc0 sequence for DSPenHauke Mehrtens
This resolves the hazard between the mtc0 in the change_c0_status() and the mfc0 in configure_exception_vector(). Without resolving this hazard configure_exception_vector() could read an old value and would restore this old value again. This would revert the changes change_c0_status() did. I checked this by printing out the read_c0_status() at the end of per_cpu_trap_init() and the ST0_MX is not set without this patch. The hazard is documented in the MIPS Architecture Reference Manual Vol. III: MIPS32/microMIPS32 Privileged Resource Architecture (MD00088), rev 6.03 table 8.1 which includes: Producer | Consumer | Hazard ----------|----------|---------------------------- mtc0 | mfc0 | any coprocessor 0 register I saw this hazard on an Atheros AR9344 rev 2 SoC with a MIPS 74Kc CPU. There the change_c0_status() function would activate the DSPen by setting ST0_MX in the c0_status register. This was reverted and then the system got a DSP exception when the DSP registers were saved in save_dsp() in the first process switch. The crash looks like this: [ 0.089999] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.097796] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.107070] Kernel panic - not syncing: Unexpected DSP exception [ 0.113470] Rebooting in 1 seconds.. We saw this problem in OpenWrt only on the MIPS 74Kc based Atheros SoCs, not on the 24Kc based SoCs. We only saw it with kernel 5.4 not with kernel 4.19, in addition we had to use GCC 8.4 or 9.X, with GCC 8.3 it did not happen. In the kernel I bisected this problem to commit 9012d011660e ("compiler: allow all arches to enable CONFIG_OPTIMIZE_INLINING"), but when this was reverted it also happened after commit 172dcd935c34b ("MIPS: Always allocate exception vector for MIPSr2+"). Commit 0b24cae4d535 ("MIPS: Add missing EHB in mtc0 -> mfc0 sequence.") does similar changes to a different file. I am not sure if there are more places affected by this problem. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Cc: <stable@vger.kernel.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-07-05.gitignore: Do not track `defconfig` from `make savedefconfig`Paul Menzel
Running `make savedefconfig` creates by default `defconfig`, which is, currently, on git’s radar, for example, `git status` lists this file as untracked. So, add the file to `.gitignore`, so it’s ignored by git. Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-07-04Merge tag 'powerpc-5.8-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "One fix for a regression in our pkey handling, which exhibits as PROT_EXEC mappings taking continuous page faults. Thanks to: Jan Stancek, Aneesh Kumar K.V" * tag 'powerpc-5.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/mm/pkeys: Make pkey access check work on execute_only_key
2020-07-04Merge tag 'arm64-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Will Deacon: "Nothing earth-shattering, really - some CPU errata workarounds (one day they'll get it right, ha!) and a fix for a boot failure with very large kernel images where the alternative patching gets confused when patching relative branches using veneers. - Fix alternative patching for very large kernel images and modules - Hook up existing CPU errata workarounds for Qualcomm Kryo CPUs" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Add KRYO4XX silver CPU cores to erratum list 1530923 and 1024718 arm64: Add KRYO4XX gold CPU cores to erratum list 1463225 and 1418040 arm64: Add MIDR value for KRYO4XX gold CPU cores arm64/alternatives: use subsections for replacement sequences
2020-07-04io_uring: fix regression with always ignoring signals in io_cqring_wait()Jens Axboe
When switching to TWA_SIGNAL for task_work notifications, we also made any signal based condition in io_cqring_wait() return -ERESTARTSYS. This breaks applications that rely on using signals to abort someone waiting for events. Check if we have a signal pending because of queued task_work, and repeat the signal check once we've run the task_work. This provides a reliable way of telling the two apart. Additionally, only use TWA_SIGNAL if we are using an eventfd. If not, we don't have the dependency situation described in the original commit, and we can get by with just using TWA_RESUME like we previously did. Fixes: ce593a6c480a ("io_uring: use signal based task_work running") Cc: stable@vger.kernel.org # v5.7 Reported-by: Andres Freund <andres@anarazel.de> Tested-by: Andres Freund <andres@anarazel.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-04x86/ldt: Disable 16-bit segments on Xen PVAndy Lutomirski
Xen PV doesn't implement ESPFIX64, so they don't work right. Disable them. Also print a warning the first time anyone tries to use a 16-bit segment on a Xen PV guest that would otherwise allow it to help people diagnose this change in behavior. This gets us closer to having all x86 selftests pass on Xen PV. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/92b2975459dfe5929ecf34c3896ad920bd9e3f2d.1593795633.git.luto@kernel.org
2020-07-04x86/entry/32: Fix #MC and #DB wiring on x86_32Andy Lutomirski
DEFINE_IDTENTRY_MCE and DEFINE_IDTENTRY_DEBUG were wired up as non-RAW on x86_32, but the code expected them to be RAW. Get rid of all the macro indirection for them on 32-bit and just use DECLARE_IDTENTRY_RAW and DEFINE_IDTENTRY_RAW directly. Also add a warning to make sure that we only hit the _kernel paths in kernel mode. Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/9e90a7ee8e72fd757db6d92e1e5ff16339c1ecf9.1593795633.git.luto@kernel.org
2020-07-04x86/entry/xen: Route #DB correctly on Xen PVAndy Lutomirski
On Xen PV, #DB doesn't use IST. It still needs to be correctly routed depending on whether it came from user or kernel mode. Get rid of DECLARE/DEFINE_IDTENTRY_XEN -- it was too hard to follow the logic. Instead, route #DB and NMI through DECLARE/DEFINE_IDTENTRY_RAW on Xen, and do the right thing for #DB. Also add more warnings to the exc_debug* handlers to make this type of failure more obvious. This fixes various forms of corruption that happen when usermode triggers #DB on Xen PV. Fixes: 4c0dcd8350a0 ("x86/entry: Implement user mode C entry points for #DB and #MCE") Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/4163e733cce0b41658e252c6c6b3464f33fdff17.1593795633.git.luto@kernel.org
2020-07-04x86/entry, selftests: Further improve user entry sanity checksAndy Lutomirski
Chasing down a Xen bug caused me to realize that the new entry sanity checks are still fairly weak. Add some more checks. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/881de09e786ab93ce56ee4a2437ba2c308afe7a9.1593795633.git.luto@kernel.org
2020-07-04x86/entry/compat: Clear RAX high bits on Xen PV SYSENTERAndy Lutomirski
Move the clearing of the high bits of RAX after Xen PV joins the SYSENTER path so that Xen PV doesn't skip it. Arguably this code should be deleted instead, but that would belong in the merge window. Fixes: ffae641f5747 ("x86/entry/64/compat: Fix Xen PV SYSENTER frame setup") Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/9d33b3f3216dcab008070f1c28b6091ae7199969.1593795633.git.luto@kernel.org
2020-07-03Merge tag 'for-linus-5.8b-rc4-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "One small cleanup patch for ARM and two patches for the xenbus driver fixing latent problems (large stack allocations and bad return code settings)" * tag 'for-linus-5.8b-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/xenbus: let xenbus_map_ring_valloc() return errno values only xen/xenbus: avoid large structs and arrays on the stack arm/xen: remove the unused macro GRANT_TABLE_PHYSADDR
2020-07-04i2c: mlxcpld: check correct size of maximum RECV_LEN packetWolfram Sang
I2C_SMBUS_BLOCK_MAX defines already the maximum number as defined in the SMBus 2.0 specs. I don't see a reason to add 1 here. Also, fix the errno to what is suggested for this error. Fixes: c9bfdc7c16cb ("i2c: mlxcpld: Add support for smbus block read transaction") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Michael Shych <michaelsh@mellanox.com> Tested-by: Michael Shych <michaelsh@mellanox.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-07-03Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds
Pull sysctl fix from Al Viro: "Another regression fix for sysctl changes this cycle..." * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: Call sysctl_head_finish on error
2020-07-04i2c: add Kconfig help text for slave modeWolfram Sang
I can't recall why there was none, but we surely want to have it. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-07-04i2c: slave-eeprom: update documentationWolfram Sang
Add more details which have either been missing ever since or describe recent additions. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-07-04i2c: eg20t: Load module automatically if ID matchesAndy Shevchenko
The driver can't be loaded automatically because it misses module alias to be provided. Add corresponding MODULE_DEVICE_TABLE() call to the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-07-04i2c: designware: platdrv: Set class based on DMIRicardo Ribalda
Current AMD's zen-based APUs use this core for some of its i2c-buses. With this patch we re-enable autodetection of hwmon-alike devices, so lm-sensors will be able to work automatically. It does not affect the boot-time of embedded devices, as the class is set based on the DMI information. DMI is probed only on Qtechnology QT5222 Industrial Camera Platform. DocLink: https://qtec.com/camera-technology-camera-platforms/ Fixes: 3eddad96c439 ("i2c: designware: reverts "i2c: designware: Add support for AMD I2C controller"") Signed-off-by: Ricardo Ribalda <ribalda@kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-07-04i2c: algo-pca: Add 0x78 as SCL stuck low status for PCA9665Chris Packham
The PCA9665 datasheet says that I2CSTA = 78h indicates that SCL is stuck low, this differs to the PCA9564 which uses 90h for this indication. Treat either 0x78 or 0x90 as an indication that the SCL line is stuck. Based on looking through the PCA9564 and PCA9665 datasheets this should be safe for both chips. The PCA9564 should not return 0x78 for any valid state and the PCA9665 should not return 0x90. Fixes: eff9ec95efaa ("i2c-algo-pca: Add PCA9665 support") Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-07-03Merge tag '5.8-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull cifs fixes from Steve French: "Eight cifs/smb3 fixes, most when specifying the multiuser mount flag. Five of the fixes are for stable" * tag '5.8-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: prevent truncation from long to int in wait_for_free_credits cifs: Fix the target file was deleted when rename failed. SMB3: Honor 'posix' flag for multiuser mounts SMB3: Honor 'handletimeout' flag for multiuser mounts SMB3: Honor lease disabling for multiuser mounts SMB3: Honor persistent/resilient handle flags for multiuser mounts SMB3: Honor 'seal' flag for multiuser mounts cifs: Display local UID details for SMB sessions in DebugData
2020-07-03Merge tag 'hwmon-for-v5.8-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - Fix typo in Kconfig SENSORS_IR35221 option - Fix potential memory leak in acpi_power_meter_add() - Make sure the OVERT mask is set correctly in max6697 driver - In PMBus core, fix page vs. register when accessing fans - Mark is_visible functions static in bt1-pvt driver - Define Temp- and Volt-to-N poly as maybe-unused in bt1-pvt driver * tag 'hwmon-for-v5.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (pmbus) fix a typo in Kconfig SENSORS_IR35221 option hwmon: (acpi_power_meter) Fix potential memory leak in acpi_power_meter_add() hwmon: (max6697) Make sure the OVERT mask is set correctly hwmon: (pmbus) Fix page vs. register when accessing fans hwmon: (bt1-pvt) Mark is_visible functions static hwmon: (bt1-pvt) Define Temp- and Volt-to-N poly as maybe-unused
2020-07-03Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge misc fixes from Andrew Morton: "Subsystems affected by this patch series: mm/hugetlb, samples, mm/cma, mm/vmalloc, mm/pagealloc" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm/page_alloc: fix documentation error vmalloc: fix the owner argument for the new __vmalloc_node_range callers mm/cma.c: use exact_nid true to fix possible per-numa cma leak samples/vfs: avoid warning in statx override mm/hugetlb.c: fix pages per hugetlb calculation
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 16:34:49 +0000