summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-07-18bcma: add support for BCM43217 found in Tenda W322E (14e4:43a9)Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18bcma: extract antenna gains from SPROM correctlyRafał Miłecki
Just like in case of SSB SPROMs they are encoded in a bit tricky way. SPROM struct already uses s8 type and it's supposed to store decoded values. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18ssb: extract power info from SPROM revs 4 and 5Rafał Miłecki
This is needed to properly handle early 802.11n devices like BCM4321. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18wil6210: add new register region for AGC tableVladimir Kondratiev
New register area defined in the firmware Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18wil6210: map RGF_USER_USAGE_1 on the debugfsVladimir Kondratiev
Firmware sets this register with the offset of the firmware trace area within the peripheral memory region. Critical for the firmware trace to work Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18wil6210: use same mapping table for FW addr translation and debugfsVladimir Kondratiev
Use single data source for all information regarding the firmware memory map. With this change "ucode_xxx" regions disappears since they are in fact part of larger "upper area" region Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18wil6210: fix memory leak on error path in wil_write_file_rxon()Vladimir Kondratiev
If copy_from_user() fails, buffer allocated for parameters would leak Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18wil6210: fix double definition of 'ctx'Vladimir Kondratiev
Variable 'ctx' declarad again in the inner loop. Should use one from outer loop instead. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18wil6210: export FW/HW versions through debugfsVladimir Kondratiev
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18wil6210: support for "sparrow" hardwareVladimir Kondratiev
New hardware release appears; it require some changes to properly support it. Introduce struct wil_board and "board" attribute in wil6210_priv; keep hardware variant information in this structure. fill it on probe(). Used in the reset flow. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18Merge tag 'for-linville-20140717' of git://github.com/kvalo/athJohn W. Linville
2014-07-18Merge branch 'for-upstream' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
2014-07-18Bluetooth: Use EOPNOTSUPP instead of ENOTSUPPJohan Hedberg
The EOPNOTSUPP and ENOTSUPP errors are very similar in meaning, but ENOTSUPP is a fairly new addition to POSIX. Not all libc versions know about the value the kernel uses for ENOTSUPP so it's better to use EOPNOTSUPP to ensure understandable error messages. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-18mac80211: suppress unused variable warning without lockdepJohannes Berg
When lockdep isn't compiled, a local variable isn't used (it's only in a macro argument), annotate it to suppress the compiler warning. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-17Bluetooth: Fix allowing initiating pairing when not pairableJohan Hedberg
When we're not pairable we should still allow us to act as initiators for pairing, i.e. the HCI_PAIRABLE flag should only be affecting incoming pairing attempts. This patch fixes the relevant checks for the hci_io_capa_request_evt() and hci_pin_code_request_evt() functions. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-17Bluetooth: Introduce a flag to track who really initiates authenticationJohan Hedberg
Even though our side requests authentication, the original action that caused it may be remotely triggered, such as an incoming L2CAP or RFCOMM connect request. To track this information introduce a new hci_conn flag called HCI_CONN_AUTH_INITIATOR. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-17Bluetooth: Pass initiator/acceptor information to hci_conn_security()Johan Hedberg
We're interested in whether an authentication request is because of a remote or local action. So far hci_conn_security() has been used both for incoming and outgoing actions (e.g. RFCOMM or L2CAP connect requests) so without some modifications it cannot know which peer is responsible for requesting authentication. This patch adds a new "bool initiator" parameter to hci_conn_security() to indicate which side is responsible for the request and updates the current users to pass this information correspondingly. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-17Bluetooth: Fix resetting remote authentication requirement after pairingJohan Hedberg
When a new hci_conn object is created the remote SSP authentication requirement is set to the invalid value 0xff to indicate that it is unknown. Once pairing completes however the code was leaving it as-is. In case a new pairing happens over the same connection it is important that we reset the value back to unknown so that the pairing code doesn't make false assumptions about the requirements. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-17Bluetooth: never linger on process exitVladimir Davydov
If the current process is exiting, lingering on socket close will make it unkillable, so we should avoid it. Reproducer: #include <sys/types.h> #include <sys/socket.h> #define BTPROTO_L2CAP 0 #define BTPROTO_SCO 2 #define BTPROTO_RFCOMM 3 int main() { int fd; struct linger ling; fd = socket(PF_BLUETOOTH, SOCK_STREAM, BTPROTO_RFCOMM); //or: fd = socket(PF_BLUETOOTH, SOCK_DGRAM, BTPROTO_L2CAP); //or: fd = socket(PF_BLUETOOTH, SOCK_SEQPACKET, BTPROTO_SCO); ling.l_onoff = 1; ling.l_linger = 1000000000; setsockopt(fd, SOL_SOCKET, SO_LINGER, &ling, sizeof(ling)); return 0; } Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org
2014-07-17Bluetooth: Don't bother user space without IO capabilitiesJohan Hedberg
If user space has a NoInputNoOutput IO capability it makes no sense to bother it with confirmation requests. This patch updates both SSP and SMP to check for the local IO capability before sending a user confirmation request to user space. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-17Bluetooth: Fix using uninitialized variable when pairingJohan Hedberg
Commit 6c53823ae0e10e723131055e1e65dd6a328a228e reshuffled the way the authentication requirement gets set in the hci_io_capa_request_evt() function, but at the same time it failed to update an if-statement where cp.authentication is used before it has been initialized. The correct value the code should be looking for in this if-statement is conn->auth_type. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org # 3.16
2014-07-16mwifiex: remove redundant TDLS setup action frame check and avoid leaksBing Zhao
The unwanted frame types are already handled in 'default' case of the switch/case below. The str_ptr is allocated but it can be leaked if the length check fails in the REQUEST/RESP cases. Fix it by allocating sta_ptr after the length checks. Reported-by: Paul Stewart <pstew@chromium.org> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Paul Stewart <pstew@chromium.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-16Bluetooth: Fix always checking the blacklist for incoming connectionsJohan Hedberg
We should check the blacklist no matter what, meaning also when we're not connectable. This patch fixes the respective logic in the function making the decision whether to accept a connection or not. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-16Bluetooth: Fix trying to initiate connections when acting as LE slaveJohan Hedberg
When we have at least one LE slave connection most (probably all) controllers will refuse to initiate any new connections. To avoid unnecessary failures simply check for this situation up-front and skip the connection attempt. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-16Bluetooth: Track number of LE slave connectionsJohan Hedberg
Most (probably all) controllers can only deal with a single slave LE connection at a time. This patch adds a counter for such connections so that the number can be quickly looked up without iterating the connections list. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-16Bluetooth: Add a role parameter to hci_conn_add()Johan Hedberg
We need to be able to track slave vs master LE connections in hci_conn_hash, and to be able to do that we need to know the role of the connection by the time hci_conn_add_has() is called. This means in practice the hci_conn_add() call that creates the hci_conn_object. This patch adds a new role parameter to hci_conn_add() function to give the object its initial role value, and updates the callers to pass the appropriate role to it. Since the function now takes care of initializing both conn->role and conn->out values we can remove some other unnecessary assignments. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-16Bluetooth: Use explicit role instead of a bool in function parametersJohan Hedberg
To make the code more understandable it makes sense to use the new HCI defines for connection role instead of a "bool master" parameter. This makes it immediately clear when looking at the function calls what the last parameter is describing. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-16Bluetooth: Convert HCI_CONN_MASTER flag to a conn->role variableJohan Hedberg
Having a dedicated u8 role variable in the hci_conn struct greatly simplifies tracking of the role, since this is the native way that it's represented on the HCI level. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-16Bluetooth: Add proper defines for HCI connection roleJohan Hedberg
All HCI commands and events, including LE ones, use 0x00 for master role and 0x01 for slave role. It makes therefore sense to add generic defines for these instead of the current LE_CONN_ROLE_MASTER. Having clean defines will also make it possible to provide simpler internal APIs. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2014-07-15ssb: extract antenna gains from SPROMs revs 4+ properlyRafał Miłecki
They are encoded the same way as in older SPROMs. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15ssb: make code for antenna gain extraction more genericRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15wireless: zd1211rw: new url for fw, remove experimentalXose Vazquez Perez
Cc: Daniel Drake <dsd@laptop.org> Cc: Ulrich Kunitz <kune@deine-taler.de> Cc: John W. Linville <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15b43: N-PHY: add missing TX gain table for radio 0x2057 rev 5Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15brcmfmac: add brcmf_p2p_detach() call in brcmf_cfg80211_detach()Arend van Spriel
The function brcmf_p2p_detach() was only called in error flow of the brcmf_cfg80211_attach() routine, but it also needs to be called upon brcmf_cfg80211_detach(). Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15brcmfmac: rework wiphy structure setupArend van Spriel
Instead of waiting for IFF_UP of the primary net device to determine the band and channel information of the wiphy structure, this is now done during driver initialization in brcmf_cfg80211_attach(). The channel information is obtained from the device and the 2G band is updated when 40MHz bandwidth is enabled for that band. Before this change the band and channel objects were common between multiple brcmfmac devices in the system, which make that information rather unreliable. That is also fixed with this reworked implementation. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15brcmfmac: moving some functions aroundArend van Spriel
Just reordering the functions in preparation of subsequent changes. Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15brcmfmac: introduce feature and quirk handlingArend van Spriel
Introducing a new source module that will be responsible for identifying features and quirks related to the device being handled. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15brcmfmac: move attach and detach functions in wl_cfg80211.cArend van Spriel
Preparing for another patch move the functions in separate commit. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15brcmfmac: Make firmware path a module parameterDaniel Kim
This patch makes firmware path a module parameter so that firmware and nvram files can be loaded from the specified path. Signed-off-by: Daniel Kim <dekim@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15brcmfmac: rework debugfs functions in the driverArend van Spriel
Reworked the debugfs functions in the driver making it easier for other driver parts to add a debugfs entry and keeping the information they want to expose in debugfs private, ie. not in a header. This is accomplished by providing the function brcmf_debugfs_add_entry() in which the caller provides a read function in which they provide the content. The debugfs function will take care of creating the debugfs entry and cleaning up upon removal. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15brcmfmac: make use of seq_file API for debugfs entriesArend van Spriel
The use of seq_file simplifies the debugfs code. Simpler is better. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15brcmfmac: Cleanup used device IDs.Hante Meuleman
This patch cleans up used broadcom IDs, device IDs for all the bus layers and uses consistent naming for all IDs. Reviewed-by: Arend Van Spriel <arend@broadcom.com> Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Daniel (Deognyoun) Kim <dekim@broadcom.com> Signed-off-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15mwifiex: correct a typo in mwifiex_ret_tdls_operBing Zhao
This patch fixes this typo. Reported-by: Paul Stewart <pstew@chromium.org> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15mwifiex: declare sta_ptr in smaller scopeBing Zhao
sta_ptr is used only in an 'if' branch in this function. Move it to the smaller scope where it is used. Reported-by: Paul Stewart <pstew@chromium.org> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15mwifiex: define TDLS idle timeout macro with unitsBing Zhao
The unit of this timeout is in seconds. Reported-by: Paul Stewart <pstew@chromium.org> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15mwifiex: fix a cut-n-paste error in adhoc-startBing Zhao
The 'else if' branch never gets the chance as its condition matches 'if' branch's. Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15mwifiex: fix corner case system hang issueAmitkumar Karwar
Sometimes pending internal scan commands are delayed to give preference to Tx traffic. 'scan_processing' flag has been checked at the beginning of delay timer routine to know if in the meantime scan operation has been cancelled. There is a corner case where pending scan commands are emptied after scan_processing flag check is passed. In this case wrong pointer returned by list_first_entry() is passed to list_del() which causes system hang. This patch fixes the issue by adding list_empty() check. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15mwifiex: access rx_reorder_tbl_ptr only while holding lockAmitkumar Karwar
This patch fixes a bug in which rx_reorder_tbl_ptr is accessed without holding spinlock at few places. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15wireless: rt2x00: add new rt2800usb devicesXose Vazquez Perez
0x0b05 0x17e8 RT5372 USB 2.0 bgn 2x2 ASUS USB-N14 0x0411 0x0253 RT5572 USB 2.0 abgn 2x2 BUFFALO WLP-U2-300D 0x0df6 0x0078 RT???? Sitecom N300 Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: users@rt2x00.serialmonkey.com Cc: linux-wireless@vger.kernel.org Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15wlcore/wl18xx/wl12xx: convert bitmaps to unsigned longsEliad Peller
The *_bit operations expect unsigned longs. Instead of casting the pointers, simply define various bitmaps as unsigned long (instead of u32). Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 07:47:08 +0000