| Age | Commit message (Collapse) | Author |
|---|
|
device_table in module_phy_driver macro is defined only when the
driver is built as a module. So a PHY driver imports phy::DeviceId
module in the following way then hits `unused import` warning when
it's compiled as built-in:
use kernel::net::phy::DeviceId;
kernel::module_phy_driver! {
drivers: [PhyQT2025],
device_table: [
DeviceId::new_with_driver::<PhyQT2025>(),
],
Put device_table in a const. It's not included in the kernel image if
unused (when the driver is compiled as built-in), and the compiler
doesn't complain.
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20240930134038.1309-1-fujita.tomonori@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for link up and link down interrupts in lan887x.
Signed-off-by: Divya Koppera <divya.koppera@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20241001144421.6661-1-divya.koppera@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Guillaume Nault says:
====================
ipv4: Convert ip_route_input_slow() and its callers to dscp_t.
Prepare ip_route_input_slow() and its call chain to future conversion
of ->flowi4_tos.
The ->flowi4_tos field of "struct flowi4" is used in many different
places, which makes it hard to convert it from __u8 to dscp_t.
In order to avoid a big patch updating all its users at once, this
patch series gradually converts some users to dscp_t. Those users now
set ->flowi4_tos from a dscp_t variable that is converted to __u8 using
inet_dscp_to_dsfield().
When all users of ->flowi4_tos will use a dscp_t variable, converting
that field to dscp_t will just be a matter of removing all the
inet_dscp_to_dsfield() conversions.
This series concentrates on ip_route_input_slow() and its direct and
indirect callers.
====================
Link: https://patch.msgid.link/cover.1727807926.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pass a dscp_t variable to ip_route_input_slow(), instead of a plain u8,
to prevent accidental setting of ECN bits in ->flowi4_tos.
Only ip_route_input_rcu() actually calls ip_route_input_slow(). Since
it already has a dscp_t variable to pass as parameter, we only need to
remove the inet_dscp_to_dsfield() conversion.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/d6bca5f87eea9e83a3861e6e05594cdd252583c9.1727807926.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pass a dscp_t variable to ip_route_input_rcu(), instead of a plain u8,
to prevent accidental setting of ECN bits in ->flowi4_tos.
Callers of ip_route_input_rcu() to consider are:
* ip_route_input_noref(), which already has a dscp_t variable to pass
as parameter. We just need to remove the inet_dscp_to_dsfield()
conversion.
* inet_rtm_getroute(), which receives a u8 from user space and needs
to convert it with inet_dsfield_to_dscp().
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/c4dbb5aa9cbc79c4fcb317abbffa7c7156bc56a7.1727807926.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pass a dscp_t variable to ip_route_input_noref(), instead of a plain
u8, to prevent accidental setting of ECN bits in ->flowi4_tos.
Callers of ip_route_input_noref() to consider are:
* arp_process() in net/ipv4/arp.c. This function sets the tos
parameter to 0, which is already a valid dscp_t value, so it
doesn't need to be adjusted for the new prototype.
* ip_route_input(), which already has a dscp_t variable to pass as
parameter. We just need to remove the inet_dscp_to_dsfield()
conversion.
* ipvlan_l3_rcv(), bpf_lwt_input_reroute(), ip_expire(),
ip_rcv_finish_core(), xfrm4_rcv_encap_finish() and
xfrm4_rcv_encap(), which get the DSCP directly from IPv4 headers
and can simply use the ip4h_dscp() helper.
While there, declare the IPv4 header pointers as const in
ipvlan_l3_rcv() and bpf_lwt_input_reroute().
Also, modify the declaration of ip_route_input_noref() in
include/net/route.h so that it matches the prototype of its
implementation in net/ipv4/route.c.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/a8a747bed452519c4d0cc06af32c7e7795d7b627.1727807926.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pass a dscp_t variable to ip_route_input(), instead of a plain u8, to
prevent accidental setting of ECN bits in ->flowi4_tos.
Callers of ip_route_input() to consider are:
* input_action_end_dx4_finish() and input_action_end_dt4() in
net/ipv6/seg6_local.c. These functions set the tos parameter to 0,
which is already a valid dscp_t value, so they don't need to be
adjusted for the new prototype.
* icmp_route_lookup(), which already has a dscp_t variable to pass as
parameter. We just need to remove the inet_dscp_to_dsfield()
conversion.
* br_nf_pre_routing_finish(), ip_options_rcv_srr() and ip4ip6_err(),
which get the DSCP directly from IPv4 headers. Define a helper to
read the .tos field of struct iphdr as dscp_t, so that these
function don't have to do the conversion manually.
While there, declare *iph as const in br_nf_pre_routing_finish(),
declare its local variables in reverse-christmas-tree order and move
the "err = ip_route_input()" assignment out of the conditional to avoid
checkpatch warning.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/e9d40781d64d3d69f4c79ac8a008b8d67a033e8d.1727807926.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pass a dscp_t variable to icmp_route_lookup(), instead of a plain u8,
to prevent accidental setting of ECN bits in ->flowi4_tos. Rename that
variable ("tos" -> "dscp") to make the intent clear.
While there, reorganise the function parameters to fill up horizontal
space.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/294fead85c6035bcdc5fcf9a6bb4ce8798c45ba1.1727807926.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Mix netns into all IPv4 FIB hashes to avoid massive collision when
inserting the same address in many netns.
Signed-off-by: Alexandre Ferrieux <alexandre.ferrieux@orange.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241001231438.3855035-1-alexandre.ferrieux@orange.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Joe Damato says:
====================
ena: Link IRQs, queues, and NAPI instances
This series uses the netdev-genl API to link IRQs and queues to NAPI IDs
so that this information is queryable by user apps. This is particularly
useful for epoll-based busy polling apps which rely on having access to
the NAPI ID.
I've tested these commits on an EC2 instance with an ENA NIC configured
and have included test output in the commit messages for each patch
showing how to query the information.
I noted in the implementation that the driver requests an IRQ for
management purposes which does not have an associated NAPI. I tried
to take this into account in patch 1, but would appreciate if ENA
maintainers can verify I did this correctly.
v1: https://lore.kernel.org/all/20240930195617.37369-1-jdamato@fastly.com/
====================
Link: https://patch.msgid.link/20241002001331.65444-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Link queues to NAPIs using the netdev-genl API so this information is
queryable.
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump queue-get --json='{"ifindex": 2}'
[{'id': 0, 'ifindex': 2, 'napi-id': 8201, 'type': 'rx'},
{'id': 1, 'ifindex': 2, 'napi-id': 8202, 'type': 'rx'},
{'id': 2, 'ifindex': 2, 'napi-id': 8203, 'type': 'rx'},
{'id': 3, 'ifindex': 2, 'napi-id': 8204, 'type': 'rx'},
{'id': 4, 'ifindex': 2, 'napi-id': 8205, 'type': 'rx'},
{'id': 5, 'ifindex': 2, 'napi-id': 8206, 'type': 'rx'},
{'id': 6, 'ifindex': 2, 'napi-id': 8207, 'type': 'rx'},
{'id': 7, 'ifindex': 2, 'napi-id': 8208, 'type': 'rx'},
{'id': 0, 'ifindex': 2, 'napi-id': 8201, 'type': 'tx'},
{'id': 1, 'ifindex': 2, 'napi-id': 8202, 'type': 'tx'},
{'id': 2, 'ifindex': 2, 'napi-id': 8203, 'type': 'tx'},
{'id': 3, 'ifindex': 2, 'napi-id': 8204, 'type': 'tx'},
{'id': 4, 'ifindex': 2, 'napi-id': 8205, 'type': 'tx'},
{'id': 5, 'ifindex': 2, 'napi-id': 8206, 'type': 'tx'},
{'id': 6, 'ifindex': 2, 'napi-id': 8207, 'type': 'tx'},
{'id': 7, 'ifindex': 2, 'napi-id': 8208, 'type': 'tx'}]
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: David Arinzon <darinzon@amazon.com>
Link: https://patch.msgid.link/20241002001331.65444-3-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Link IRQs to NAPI instances with netif_napi_set_irq. This information
can be queried with the netdev-genl API. Note that the ENA device
appears to allocate an IRQ for management purposes which does not have a
NAPI associated with it; this commit takes this into consideration to
accurately construct a map between IRQs and NAPI instances.
Compare the output of /proc/interrupts for my ena device with the output of
netdev-genl after applying this patch:
$ cat /proc/interrupts | grep enp55s0 | cut -f1 --delimiter=':'
94
95
96
97
98
99
100
101
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump napi-get --json='{"ifindex": 2}'
[{'id': 8208, 'ifindex': 2, 'irq': 101},
{'id': 8207, 'ifindex': 2, 'irq': 100},
{'id': 8206, 'ifindex': 2, 'irq': 99},
{'id': 8205, 'ifindex': 2, 'irq': 98},
{'id': 8204, 'ifindex': 2, 'irq': 97},
{'id': 8203, 'ifindex': 2, 'irq': 96},
{'id': 8202, 'ifindex': 2, 'irq': 95},
{'id': 8201, 'ifindex': 2, 'irq': 94}]
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: David Arinzon <darinzon@amazon.com>
Link: https://patch.msgid.link/20241002001331.65444-2-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Brandon reports sporadic, non-sensical spikes in cumulative pressure
time (total=) when reading cpu.pressure at a high rate. This is due to
a race condition between reader aggregation and tasks changing states.
While it affects all states and all resources captured by PSI, in
practice it most likely triggers with CPU pressure, since scheduling
events are so frequent compared to other resource events.
The race context is the live snooping of ongoing stalls during a
pressure read. The read aggregates per-cpu records for stalls that
have concluded, but will also incorporate ad-hoc the duration of any
active state that hasn't been recorded yet. This is important to get
timely measurements of ongoing stalls. Those ad-hoc samples are
calculated on-the-fly up to the current time on that CPU; since the
stall hasn't concluded, it's expected that this is the minimum amount
of stall time that will enter the per-cpu records once it does.
The problem is that the path that concludes the state uses a CPU clock
read that is not synchronized against aggregators; the clock is read
outside of the seqlock protection. This allows aggregators to race and
snoop a stall with a longer duration than will actually be recorded.
With the recorded stall time being less than the last snapshot
remembered by the aggregator, a subsequent sample will underflow and
observe a bogus delta value, resulting in an erratic jump in pressure.
Fix this by moving the clock read of the state change into the seqlock
protection. This ensures no aggregation can snoop live stalls past the
time that's recorded when the state concludes.
Reported-by: Brandon Duffany <brandon@buildbuddy.io>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219194
Link: https://lore.kernel.org/lkml/20240827121851.GB438928@cmpxchg.org/
Fixes: df77430639c9 ("psi: Reduce calls to sched_clock() in psi")
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
As was tried in commit 4e103134b862 ("KVM: x86/mmu: Zap only the relevant
pages when removing a memslot"), all shadow pages, i.e. non-leaf SPTEs,
need to be zapped. All of the accounting for a shadow page is tied to the
memslot, i.e. the shadow page holds a reference to the memslot, for all
intents and purposes. Deleting the memslot without removing all relevant
shadow pages, as is done when KVM_X86_QUIRK_SLOT_ZAP_ALL is disabled,
results in NULL pointer derefs when tearing down the VM.
Reintroduce from that commit the code that walks the whole memslot when
there are active shadow MMU pages.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Jacob Keller says:
====================
packing: various improvements and KUnit tests
This series contains a handful of improvements and fixes for the packing
library, including the addition of KUnit tests.
There are two major changes which might be considered bug fixes:
1) The library is updated to handle arbitrary buffer lengths, fixing
undefined behavior when operating on buffers which are not a multiple
of 4 bytes.
2) The behavior of QUIRK_MSB_ON_THE_RIGHT is fixed to match the intended
behavior when operating on packings that are not byte aligned.
These are not sent to net because no driver currently depends on this
behavior. For (1), the existing users of the packing API all operate on
buffers which are multiples of 4-bytes. For (2), no driver currently uses
QUIRK_MSB_ON_THE_RIGHT. The incorrect behavior was found while writing
KUnit tests.
This series also includes a handful of minor cleanups from Vladimir, as
well as a change to introduce a separated pack() and unpack() API. This API
is not (yet) used by a driver, but is the first step in implementing
pack_fields() and unpack_fields() which will be used in future changes for
the ice driver and changes Vladimir has in progress for other drivers using
the packing API.
This series is part 1 of a 2-part series for implementing use of
lib/packing in the ice driver. The 2nd part includes a new pack_fields()
and unpack_fields() implementation inspired by the ice driver's existing
bit packing code. It is built on top of the split pack() and unpack()
code. Additionally, the KUnit tests are built on top of pack() and
unpack(), based on original selftests written by Vladimir.
Fitting the entire library changes and drivers changes into a single series
exceeded the usual series limits.
v1: https://lore.kernel.org/r/20240930-packing-kunit-tests-and-split-pack-unpack-v1-0-94b1f04aca85@intel.com
====================
Link: https://patch.msgid.link/20241002-packing-kunit-tests-and-split-pack-unpack-v2-0-8373e551eae3@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is an u8, so using GENMASK_ULL() for unsigned long long is
unnecessary.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20241002-packing-kunit-tests-and-split-pack-unpack-v2-10-8373e551eae3@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This helps clarify what the 8 is for.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241002-packing-kunit-tests-and-split-pack-unpack-v2-9-8373e551eae3@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The QUIRK_MSB_ON_THE_RIGHT quirk is intended to modify pack() and unpack()
so that the most significant bit of each byte in the packed layout is on
the right.
The way the quirk is currently implemented is broken whenever the packing
code packs or unpacks any value that is not exactly a full byte.
The broken behavior can occur when packing any values smaller than one
byte, when packing any value that is not exactly a whole number of bytes,
or when the packing is not aligned to a byte boundary.
This quirk is documented in the following way:
1. Normally (no quirks), we would do it like this:
::
63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32
7 6 5 4
31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
3 2 1 0
<snip>
2. If QUIRK_MSB_ON_THE_RIGHT is set, we do it like this:
::
56 57 58 59 60 61 62 63 48 49 50 51 52 53 54 55 40 41 42 43 44 45 46 47 32 33 34 35 36 37 38 39
7 6 5 4
24 25 26 27 28 29 30 31 16 17 18 19 20 21 22 23 8 9 10 11 12 13 14 15 0 1 2 3 4 5 6 7
3 2 1 0
That is, QUIRK_MSB_ON_THE_RIGHT does not affect byte positioning, but
inverts bit offsets inside a byte.
Essentially, the mapping for physical bit offsets should be reserved for a
given byte within the payload. This reversal should be fixed to the bytes
in the packing layout.
The logic to implement this quirk is handled within the
adjust_for_msb_right_quirk() function. This function does not work properly
when dealing with the bytes that contain only a partial amount of data.
In particular, consider trying to pack or unpack the range 53-44. We should
always be mapping the bits from the logical ordering to their physical
ordering in the same way, regardless of what sequence of bits we are
unpacking.
This, we should grab the following logical bits:
Logical: 55 54 53 52 51 50 49 48 47 45 44 43 42 41 40 39
^ ^ ^ ^ ^ ^ ^ ^ ^
And pack them into the physical bits:
Physical: 48 49 50 51 52 53 54 55 40 41 42 43 44 45 46 47
Logical: 48 49 50 51 52 53 44 45 46 47
^ ^ ^ ^ ^ ^ ^ ^ ^ ^
The current logic in adjust_for_msb_right_quirk is broken. I believe it is
intending to map according to the following:
Physical: 48 49 50 51 52 53 54 55 40 41 42 43 44 45 46 47
Logical: 48 49 50 51 52 53 44 45 46 47
^ ^ ^ ^ ^ ^ ^ ^ ^ ^
That is, it tries to keep the bits at the start and end of a packing
together. This is wrong, as it makes the packing change what bit is being
mapped to what based on which bits you're currently packing or unpacking.
Worse, the actual calculations within adjust_for_msb_right_quirk don't make
sense.
Consider the case when packing the last byte of an unaligned packing. It
might have a start bit of 7 and an end bit of 5. This would have a width of
3 bits. The new_start_bit will be calculated as the width - the box_end_bit
- 1. This will underflow and produce a negative value, which will
ultimate result in generating a new box_mask of all 0s.
For any other values, the result of the calculations of the
new_box_end_bit, new_box_start_bit, and the new box_mask will result in the
exact same values for the box_end_bit, box_start_bit, and box_mask. This
makes the calculations completely irrelevant.
If box_end_bit is 0, and box_start_bit is 7, then the entire function of
adjust_for_msb_right_quirk will boil down to just:
*to_write = bitrev8(*to_write)
The other adjustments are attempting (incorrectly) to keep the bits in the
same place but just reversed. This is not the right behavior even if
implemented correctly, as it leaves the mapping dependent on the bit values
being packed or unpacked.
Remove adjust_for_msb_right_quirk() and just use bitrev8 to reverse the
byte order when interacting with the packed data.
In particular, for packing, we need to reverse both the box_mask and the
physical value being packed. This is done after shifting the value by
box_end_bit so that the reversed mapping is always aligned to the physical
buffer byte boundary. The box_mask is reversed as we're about to use it to
clear any stale bits in the physical buffer at this block.
For unpacking, we need to reverse the contents of the physical buffer
*before* masking with the box_mask. This is critical, as the box_mask is a
logical mask of the bit layout before handling the QUIRK_MSB_ON_THE_RIGHT.
Add several new tests which cover this behavior. These tests will fail
without the fix and pass afterwards. Note that no current drivers make use
of QUIRK_MSB_ON_THE_RIGHT. I suspect this is why there have been no reports
of this inconsistency before.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20241002-packing-kunit-tests-and-split-pack-unpack-v2-8-8373e551eae3@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While reviewing the initial KUnit tests for lib/packing, Przemek pointed
out that the test values have duplicate bytes in the input sequence.
In addition, I noticed that the unit tests pack and unpack on a byte
boundary, instead of crossing bytes. Thus, we lack good coverage of the
corner cases of the API.
Add additional unit tests to cover packing and unpacking byte buffers which
do not have duplicate bytes in the unpacked value, and which pack and
unpack to an unaligned offset.
A careful reviewer may note the lack tests for QUIRK_MSB_ON_THE_RIGHT. This
is because I found issues with that quirk during test implementation. This
quirk will be fixed and the tests will be included in a future change.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20241002-packing-kunit-tests-and-split-pack-unpack-v2-7-8373e551eae3@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add 24 simple KUnit tests for the lib/packing.c pack() and unpack() APIs.
The first 16 tests exercise all combinations of quirks with a simple magic
number value on a 16-byte buffer. The remaining 8 tests cover
non-multiple-of-4 buffer sizes.
These tests were originally written by Vladimir as simple selftest
functions. I adapted them to KUnit, refactoring them into a table driven
approach. This will aid in adding additional tests in the future.
Co-developed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241002-packing-kunit-tests-and-split-pack-unpack-v2-6-8373e551eae3@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
packing() is now used in some hot paths, and it would be good to get rid
of some ifs and buts that depend on "op", to speed things up a little bit.
With the main implementations now taking size_t endbit, we no longer
have to check for negative values. Update the local integer variables to
also be size_t to match.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241002-packing-kunit-tests-and-split-pack-unpack-v2-5-8373e551eae3@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Geert Uytterhoeven described packing() as "really bad API" because of
not being able to enforce const correctness. The same function is used
both when "pbuf" is input and "uval" is output, as in the other way
around.
Create 2 wrapper functions where const correctness can be ensured.
Do ugly type casts inside, to be able to reuse packing() as currently
implemented - which will _not_ modify the input argument.
Also, take the opportunity to change the type of startbit and endbit to
size_t - an unsigned type - in these new function prototypes. When int,
an extra check for negative values is necessary. Hopefully, when
packing() goes away completely, that check can be dropped.
My concern is that code which does rely on the conditional directionality
of packing() is harder to refactor without blowing up in size. So it may
take a while to completely eliminate packing(). But let's make alternatives
available for those who do not need that.
Link: https://lore.kernel.org/netdev/20210223112003.2223332-1-geert+renesas@glider.be/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241002-packing-kunit-tests-and-split-pack-unpack-v2-4-8373e551eae3@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It is not necessary to have the kernel-doc duplicated both in the
header and in the implementation. It is better to have it near the
implementation of the function, since in C, a function can have N
declarations, but only one definition.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241002-packing-kunit-tests-and-split-pack-unpack-v2-3-8373e551eae3@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jacob Keller has a use case for packing() in the intel/ice networking
driver, but it cannot be used as-is.
Simply put, the API quirks for LSW32_IS_FIRST and LITTLE_ENDIAN are
naively implemented with the undocumented assumption that the buffer
length must be a multiple of 4. All calculations of group offsets and
offsets of bytes within groups assume that this is the case. But in the
ice case, this does not hold true. For example, packing into a buffer
of 22 bytes would yield wrong results, but pretending it was a 24 byte
buffer would work.
Rather than requiring such hacks, and leaving a big question mark when
it comes to discontinuities in the accessible bit fields of such buffer,
we should extend the packing API to support this use case.
It turns out that we can keep the design in terms of groups of 4 bytes,
but also make it work if the total length is not a multiple of 4.
Just like before, imagine the buffer as a big number, and its most
significant bytes (the ones that would make up to a multiple of 4) are
missing. Thus, with a big endian (no quirks) interpretation of the
buffer, those most significant bytes would be absent from the beginning
of the buffer, and with a LSW32_IS_FIRST interpretation, they would be
absent from the end of the buffer. The LITTLE_ENDIAN quirk, in the
packing() API world, only affects byte ordering within groups of 4.
Thus, it does not change which bytes are missing. Only the significance
of the remaining bytes within the (smaller) group.
No change intended for buffer sizes which are multiples of 4. Tested
with the sja1105 driver and with downstream unit tests.
Link: https://lore.kernel.org/netdev/a0338310-e66c-497c-bc1f-a597e50aa3ff@intel.com/
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241002-packing-kunit-tests-and-split-pack-unpack-v2-2-8373e551eae3@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While reworking the implementation, it became apparent that this check
does not exist.
There is no functional issue yet, because at call sites, "startbit" and
"endbit" are always hardcoded to correct values, and never come from the
user.
Even with the upcoming support of arbitrary buffer lengths, the
"startbit >= 8 * pbuflen" check will remain correct. This is because
we intend to always interpret the packed buffer in a way that avoids
discontinuities in the available bit indices.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20241002-packing-kunit-tests-and-split-pack-unpack-v2-1-8373e551eae3@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The cpuhp online/offline processing race also exists in percpu-mode hwlat
tracer in theory, apply the fix too. That is:
T1 | T2
[CPUHP_ONLINE] | cpu_device_down()
hwlat_hotplug_workfn() |
| cpus_write_lock()
| takedown_cpu(1)
| cpus_write_unlock()
[CPUHP_OFFLINE] |
cpus_read_lock() |
start_kthread(1) |
cpus_read_unlock() |
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20240924094515.3561410-5-liwei391@huawei.com
Fixes: ba998f7d9531 ("trace/hwlat: Support hotplug operations")
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
There is another found exception that the "timerlat/1" thread was
scheduled on CPU0, and lead to timer corruption finally:
```
ODEBUG: init active (active state 0) object: ffff888237c2e108 object type: hrtimer hint: timerlat_irq+0x0/0x220
WARNING: CPU: 0 PID: 426 at lib/debugobjects.c:518 debug_print_object+0x7d/0xb0
Modules linked in:
CPU: 0 UID: 0 PID: 426 Comm: timerlat/1 Not tainted 6.11.0-rc7+ #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:debug_print_object+0x7d/0xb0
...
Call Trace:
<TASK>
? __warn+0x7c/0x110
? debug_print_object+0x7d/0xb0
? report_bug+0xf1/0x1d0
? prb_read_valid+0x17/0x20
? handle_bug+0x3f/0x70
? exc_invalid_op+0x13/0x60
? asm_exc_invalid_op+0x16/0x20
? debug_print_object+0x7d/0xb0
? debug_print_object+0x7d/0xb0
? __pfx_timerlat_irq+0x10/0x10
__debug_object_init+0x110/0x150
hrtimer_init+0x1d/0x60
timerlat_main+0xab/0x2d0
? __pfx_timerlat_main+0x10/0x10
kthread+0xb7/0xe0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2d/0x40
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
```
After tracing the scheduling event, it was discovered that the migration
of the "timerlat/1" thread was performed during thread creation. Further
analysis confirmed that it is because the CPU online processing for
osnoise is implemented through workers, which is asynchronous with the
offline processing. When the worker was scheduled to create a thread, the
CPU may has already been removed from the cpu_online_mask during the offline
process, resulting in the inability to select the right CPU:
T1 | T2
[CPUHP_ONLINE] | cpu_device_down()
osnoise_hotplug_workfn() |
| cpus_write_lock()
| takedown_cpu(1)
| cpus_write_unlock()
[CPUHP_OFFLINE] |
cpus_read_lock() |
start_kthread(1) |
cpus_read_unlock() |
To fix this, skip online processing if the CPU is already offline.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20240924094515.3561410-4-liwei391@huawei.com
Fixes: c8895e271f79 ("trace/osnoise: Support hotplug operations")
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
stop_kthread() is the offline callback for "trace/osnoise:online", since
commit 5bfbcd1ee57b ("tracing/timerlat: Add interface_lock around clearing
of kthread in stop_kthread()"), the following ABBA deadlock scenario is
introduced:
T1 | T2 [BP] | T3 [AP]
osnoise_hotplug_workfn() | work_for_cpu_fn() | cpuhp_thread_fun()
| _cpu_down() | osnoise_cpu_die()
mutex_lock(&interface_lock) | | stop_kthread()
| cpus_write_lock() | mutex_lock(&interface_lock)
cpus_read_lock() | cpuhp_kick_ap() |
As the interface_lock here in just for protecting the "kthread" field of
the osn_var, use xchg() instead to fix this issue. Also use
for_each_online_cpu() back in stop_per_cpu_kthreads() as it can take
cpu_read_lock() again.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20240924094515.3561410-3-liwei391@huawei.com
Fixes: 5bfbcd1ee57b ("tracing/timerlat: Add interface_lock around clearing of kthread in stop_kthread()")
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
osnoise_hotplug_workfn() is the asynchronous online callback for
"trace/osnoise:online". It may be congested when a CPU goes online and
offline repeatedly and is invoked for multiple times after a certain
online.
This will lead to kthread leak and timer corruption. Add a check
in start_kthread() to prevent this situation.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20240924094515.3561410-2-liwei391@huawei.com
Fixes: c8895e271f79 ("trace/osnoise: Support hotplug operations")
Signed-off-by: Wei Li <liwei391@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
<asm/ftrace.h> uses struct pt_regs in several places. Include
<asm/ptrace.h> to ensure it's visible. This is needed to make sure
object files that only include <asm/asm-prototypes.h> compile.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/20240916221557.846853-2-samitolvanen@google.com
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The help text in osnoise top and timerlat top had some minor errors
and omissions. The -d option was missing the 's' (second) abbreviation and
the error message for '-d' used '-D'.
Cc: stable@vger.kernel.org
Fixes: 1eceb2fc2ca54 ("rtla/osnoise: Add osnoise top mode")
Fixes: a828cd18bc4ad ("rtla: Add timerlat tool and timelart top mode")
Link: https://lore.kernel.org/20240813155831.384446-1-ezulian@redhat.com
Suggested-by: Tomas Glozar <tglozar@redhat.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Eder Zulian <ezulian@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
rtla now supports out-of-tree builds, but installation fails as it
still tries to install the rtla binary from the source tree. Use the
existing macro $(RTLA) to refer to the binary.
Link: https://lore.kernel.org/ZudubuoU_JHjPZ7w@decadent.org.uk
Fixes: 01474dc706ca ("tools/rtla: Use tools/build makefiles to build rtla")
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Tested-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Ben Hutchings <benh@debian.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When the tp_printk kernel command line is used, the trace events go
directly to printk(). It is still checked via the trace_check_vprintf()
function to make sure the pointers of the trace event are legit.
The addition of reading buffers from previous boots required adding a
delta between the addresses of the previous boot and the current boot so
that the pointers in the old buffer can still be used. But this required
adding a trace_array pointer to acquire the delta offsets.
The tp_printk code does not provide a trace_array (tr) pointer, so when
the offsets were examined, a NULL pointer dereference happened and the
kernel crashed.
If the trace_array does not exist, just default the delta offsets to zero,
as that also means the trace event is not being read from a previous boot.
Link: https://lore.kernel.org/all/Zv3z5UsG_jsO9_Tb@aschofie-mobl2.lan/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20241003104925.4e1b1fd9@gandalf.local.home
Fixes: 07714b4bb3f98 ("tracing: Handle old buffer mappings for event strings and functions")
Reported-by: Alison Schofield <alison.schofield@intel.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
In `gpiod_get_label()`, it is possible that `srcu_dereference_check()` may
return a NULL pointer, leading to a scenario where `label->str` is accessed
without verifying if `label` itself is NULL.
This patch adds a proper NULL check for `label` before accessing
`label->str`. The check for `label->str != NULL` is removed because
`label->str` can never be NULL if `label` is not NULL.
This fixes the issue where the label name was being printed as `(efault)`
when dumping the sysfs GPIO file when `label == NULL`.
Fixes: 5a646e03e956 ("gpiolib: Return label, if set, for IRQ only line")
Fixes: a86d27693066 ("gpiolib: fix the speed of descriptor label setting with SRCU")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20241003131351.472015-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Oliver reports that the kvm_has_feat() helper is not behaviing as
expected for negative feature. On investigation, the main issue
seems to be caused by the following construct:
#define get_idreg_field(kvm, id, fld) \
(id##_##fld##_SIGNED ? \
get_idreg_field_signed(kvm, id, fld) : \
get_idreg_field_unsigned(kvm, id, fld))
where one side of the expression evaluates as something signed,
and the other as something unsigned. In retrospect, this is totally
braindead, as the compiler converts this into an unsigned expression.
When compared to something that is 0, the test is simply elided.
Epic fail. Similar issue exists in the expand_field_sign() macro.
The correct way to handle this is to chose between signed and unsigned
comparisons, so that both sides of the ternary expression are of the
same type (bool).
In order to keep the code readable (sort of), we introduce new
comparison primitives taking an operator as a parameter, and
rewrite the kvm_has_feat*() helpers in terms of these primitives.
Fixes: c62d7a23b947 ("KVM: arm64: Add feature checking helpers")
Reported-by: Oliver Upton <oliver.upton@linux.dev>
Tested-by: Oliver Upton <oliver.upton@linux.dev>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241002204239.2051637-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
NFS-style symlinks have target location always stored in NFS/UNIX form
where backslash means the real UNIX backslash and not the SMB path
separator.
So do not mangle slash and backslash content of NFS-style symlink during
readlink() syscall as it is already in the correct Linux form.
This fixes interoperability of NFS-style symlinks with backslashes created
by Linux NFS3 client throw Windows NFS server and retrieved by Linux SMB
client throw Windows SMB server, where both Windows servers exports the
same directory.
Fixes: d5ecebc4900d ("smb3: Allow query of symlinks stored as reparse points")
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Symlink target location stored in DataBuffer is encoded in UTF-16. So check
that symlink DataBuffer length is non-zero and even number. And check that
DataBuffer does not contain UTF-16 null codepoint because Linux cannot
process symlink with null byte.
DataBuffer for char and block devices is 8 bytes long as it contains two
32-bit numbers (major and minor). Add check for this.
DataBuffer buffer for sockets and fifos zero-length. Add checks for this.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts and no adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ReparseDataLength is sum of the InodeType size and DataBuffer size.
So to get DataBuffer size it is needed to subtract InodeType's size from
ReparseDataLength.
Function cifs_strndup_from_utf16() is currentlly accessing buf->DataBuffer
at position after the end of the buffer because it does not subtract
InodeType size from the length. Fix this problem and correctly subtract
variable len.
Member InodeType is present only when reparse buffer is large enough. Check
for ReparseDataLength before accessing InodeType to prevent another invalid
memory access.
Major and minor rdev values are present also only when reparse buffer is
large enough. Check for reparse buffer size before calling reparse_mkdev().
Fixes: d5ecebc4900d ("smb3: Allow query of symlinks stored as reparse points")
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from ieee802154, bluetooth and netfilter.
Current release - regressions:
- eth: mlx5: fix wrong reserved field in hca_cap_2 in mlx5_ifc
- eth: am65-cpsw: fix forever loop in cleanup code
Current release - new code bugs:
- eth: mlx5: HWS, fixed double-free in error flow of creating SQ
Previous releases - regressions:
- core: avoid potential underflow in qdisc_pkt_len_init() with UFO
- core: test for not too small csum_start in virtio_net_hdr_to_skb()
- vrf: revert "vrf: remove unnecessary RCU-bh critical section"
- bluetooth:
- fix uaf in l2cap_connect
- fix possible crash on mgmt_index_removed
- dsa: improve shutdown sequence
- eth: mlx5e: SHAMPO, fix overflow of hd_per_wq
- eth: ip_gre: fix drops of small packets in ipgre_xmit
Previous releases - always broken:
- core: fix gso_features_check to check for both
dev->gso_{ipv4_,}max_size
- core: fix tcp fraglist segmentation after pull from frag_list
- netfilter: nf_tables: prevent nf_skb_duplicated corruption
- sctp: set sk_state back to CLOSED if autobind fails in
sctp_listen_start
- mac802154: fix potential RCU dereference issue in
mac802154_scan_worker
- eth: fec: restart PPS after link state change"
* tag 'net-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (48 commits)
sctp: set sk_state back to CLOSED if autobind fails in sctp_listen_start
dt-bindings: net: xlnx,axi-ethernet: Add missing reg minItems
doc: net: napi: Update documentation for napi_schedule_irqoff
net/ncsi: Disable the ncsi work before freeing the associated structure
net: phy: qt2025: Fix warning: unused import DeviceId
gso: fix udp gso fraglist segmentation after pull from frag_list
bridge: mcast: Fail MDB get request on empty entry
vrf: revert "vrf: Remove unnecessary RCU-bh critical section"
net: ethernet: ti: am65-cpsw: Fix forever loop in cleanup code
net: phy: realtek: Check the index value in led_hw_control_get
ppp: do not assume bh is held in ppp_channel_bridge_input()
selftests: rds: move include.sh to TEST_FILES
net: test for not too small csum_start in virtio_net_hdr_to_skb()
net: gso: fix tcp fraglist segmentation after pull from frag_list
ipv4: ip_gre: Fix drops of small packets in ipgre_xmit
net: stmmac: dwmac4: extend timeout for VLAN Tag register busy bit check
net: add more sanity checks to qdisc_pkt_len_init()
net: avoid potential underflow in qdisc_pkt_len_init() with UFO
net: ethernet: ti: cpsw_ale: Fix warning on some platforms
net: microchip: Make FDMA config symbol invisible
...
|
|
Pull smb server fixes from Steve French:
- small cleanup patches leveraging struct size to improve access bounds checking
* tag 'v6.12-rc1-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: Use struct_size() to improve smb_direct_rdma_xmit()
ksmbd: Annotate struct copychunk_ioctl_req with __counted_by_le()
ksmbd: Use struct_size() to improve get_file_alternate_info()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"vfs:
- Ensure that iter_folioq_get_pages() advances to the next slot
otherwise it will end up using the same folio with an out-of-bound
offset.
iomap:
- Dont unshare delalloc extents which can't be reflinked, and thus
can't be shared.
- Constrain the file range passed to iomap_file_unshare() directly in
iomap instead of requiring the callers to do it.
netfs:
- Use folioq_count instead of folioq_nr_slot to prevent an
unitialized value warning in netfs_clear_buffer().
- Fix missing wakeup after issuing writes by scheduling the write
collector only if all the subrequest queues are empty and thus no
writes are pending.
- Fix two minor documentation bugs"
* tag 'vfs-6.12-rc2.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: constrain the file range passed to iomap_file_unshare
iomap: don't bother unsharing delalloc extents
netfs: Fix missing wakeup after issuing writes
Documentation: add missing folio_queue entry
folio_queue: fix documentation
netfs: Fix a KMSAN uninit-value error in netfs_clear_buffer
iov_iter: fix advancing slot in iter_folioq_get_pages()
|
|
Add support for the ethtool get_link and get_link_ksettings
operations. Display standard port information using ethtool.
Before the change:
$ethtool enP30832s1
> No data available
After the change:
$ethtool enP30832s1
> Settings for enP30832s1:
Supported ports: [ ]
Supported link modes: Not reported
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: Unknown!
Duplex: Full
Auto-negotiation: off
Port: Other
PHYAD: 0
Transceiver: internal
Link detected: yes
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1727674934-12130-1-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In sctp_listen_start() invoked by sctp_inet_listen(), it should set the
sk_state back to CLOSED if sctp_autobind() fails due to whatever reason.
Otherwise, next time when calling sctp_inet_listen(), if sctp_sk(sk)->reuse
is already set via setsockopt(SCTP_REUSE_PORT), sctp_sk(sk)->bind_hash will
be dereferenced as sk_state is LISTENING, which causes a crash as bind_hash
is NULL.
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:sctp_inet_listen+0x7f0/0xa20 net/sctp/socket.c:8617
Call Trace:
<TASK>
__sys_listen_socket net/socket.c:1883 [inline]
__sys_listen+0x1b7/0x230 net/socket.c:1894
__do_sys_listen net/socket.c:1902 [inline]
Fixes: 5e8f3f703ae4 ("sctp: simplify sctp listening code")
Reported-by: syzbot+f4e0f821e3a3b7cee51d@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://patch.msgid.link/a93e655b3c153dc8945d7a812e6d8ab0d52b7aa0.1727729391.git.lucien.xin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add missing reg minItems as based on current binding document
only ethernet MAC IO space is a supported configuration.
There is a bug in schema, current examples contain 64-bit
addressing as well as 32-bit addressing. The schema validation
does pass incidentally considering one 64-bit reg address as
two 32-bit reg address entries. If we change axi_ethernet_eth1
example node reg addressing to 32-bit schema validation reports:
Documentation/devicetree/bindings/net/xlnx,axi-ethernet.example.dtb:
ethernet@40000000: reg: [[1073741824, 262144]] is too short
To fix it add missing reg minItems constraints and to make things clearer
stick to 32-bit addressing in examples.
Fixes: cbb1ca6d5f9a ("dt-bindings: net: xlnx,axi-ethernet: convert bindings document to yaml")
Signed-off-by: Ravikanth Tuniki <ravikanth.tuniki@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/1727723615-2109795-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since commit 8380c81d5c4f ("net: Treat __napi_schedule_irqoff() as
__napi_schedule() on PREEMPT_RT"), napi_schedule_irqoff will do the
right thing if IRQs are threaded. Therefore, there is no need to use
IRQF_NO_THREAD.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20240930153955.971657-1-sean.anderson@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix incorrect documentation in uapi/linux/netfilter/nf_tables.h
regarding flowtable hooks, from Phil Sutter.
2) Fix nft_audit.sh selftests with newer nft binaries, due to different
(valid) audit output, also from Phil.
3) Disable BH when duplicating packets via nf_dup infrastructure,
otherwise race on nf_skb_duplicated for locally generated traffic.
From Eric.
4) Missing return in callback of selftest C program, from zhang jiao.
netfilter pull request 24-10-02
* tag 'nf-24-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: Add missing return value
netfilter: nf_tables: prevent nf_skb_duplicated corruption
selftests: netfilter: Fix nft_audit.sh for newer nft binaries
netfilter: uapi: NFTA_FLOWTABLE_HOOK is NLA_NESTED
====================
Link: https://patch.msgid.link/20241002202421.1281311-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Through some experiments, we found out that increasing the default
RX buffers count from 512 to 1024, gives slightly better throughput
and significantly reduces the no_wqe_rx errs on the receiver side.
Along with these, other parameters like cpu usage, retrans seg etc
also show some improvement with 1024 value.
Following are some snippets from the experiments
ntttcp tests with 512 Rx buffers
---------------------------------------
connections| throughput| no_wqe errs|
---------------------------------------
1 | 40.93Gbps | 123,211 |
16 | 180.15Gbps | 190,120 |
128 | 180.20Gbps | 173,508 |
256 | 180.27Gbps | 189,884 |
ntttcp tests with 1024 Rx buffers
---------------------------------------
connections| throughput| no_wqe errs|
---------------------------------------
1 | 44.22Gbps | 19,864 |
16 | 180.19Gbps | 4,430 |
128 | 180.21Gbps | 2,560 |
256 | 180.29Gbps | 1,529 |
So, increasing the default RX buffers per queue count to 1024
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/1727667875-29908-1-git-send-email-shradhagupta@linux.microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There is no va_end after va_copy, just add it.
Signed-off-by: zhang jiao <zhangjiao2@cmss.chinamobile.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240927040050.7851-1-zhangjiao2@cmss.chinamobile.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
File contents can only be shared (i.e. reflinked) below EOF, so it makes
no sense to try to unshare ranges beyond EOF. Constrain the file range
parameters here so that we don't have to do that in the callers.
Fixes: 5f4e5752a8a3 ("fs: add iomap_file_dirty")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20241002150213.GC21853@frogsfrogsfrogs
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
