summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-09-22dt-bindings: usb: dwc3: add sdm670 compatibleRichard Acayan
The Snapdragon 670 has DWC3 USB support. Add a compatible to reflect that. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Richard Acayan <mailingradian@gmail.com> Link: https://lore.kernel.org/r/20220922024656.178529-3-mailingradian@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22dt-bindings: phy: qcom,qusb2: document sdm670 compatibleRichard Acayan
The Snapdragon 670 uses the QUSB driver for USB 2.0. Document the compatible used in the device tree. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Richard Acayan <mailingradian@gmail.com> Link: https://lore.kernel.org/r/20220922024656.178529-2-mailingradian@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22usb: dwc3: qcom: drop unneeded compatiblesKrzysztof Kozlowski
All Qualcomm SoC DWC3 USB devices have a qcom,dwc3 fallback, thus there is no need to keep the list of compatibles growing. Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220921084654.118230-1-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22usb: dwc3: gadget: Do not clear ep delayed stop flag during ep disableWesley Cheng
DWC3_EP_DELAYED_STOP is utilized to defer issuing the end transfer command until the subsequent SETUP stage, in order to avoid end transfer timeouts. During cable disconnect scenarios, __dwc3_gadget_ep_disable() is responsible for ensuring endpoints have no active transfers pending. Since dwc3_remove_request() can now exit early if the EP delayed stop is set, avoid clearing all DEP flags, otherwise the transition back into the SETUP stage won't issue an endxfer command. Fixes: 2b2da6574e77 ("usb: dwc3: Avoid unmapping USB requests if endxfer is not complete") Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> Link: https://lore.kernel.org/r/20220919231213.21364-1-quic_wcheng@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22usb: mon: make mmapped memory read onlyTadeusz Struk
Syzbot found an issue in usbmon module, where the user space client can corrupt the monitor's internal memory, causing the usbmon module to crash the kernel with segfault, UAF, etc. The reproducer mmaps the /dev/usbmon memory to user space, and overwrites it with arbitrary data, which causes all kinds of issues. Return an -EPERM error from mon_bin_mmap() if the flag VM_WRTIE is set. Also clear VM_MAYWRITE to make it impossible to change it to writable later. Cc: "Dmitry Vyukov" <dvyukov@google.com> Cc: stable <stable@kernel.org> Fixes: 6f23ee1fefdc ("USB: add binary API to usbmon") Suggested-by: PaX Team <pageexec@freemail.hu> # for the VM_MAYRITE portion Link: https://syzkaller.appspot.com/bug?id=2eb1f35d6525fa4a74d75b4244971e5b1411c95a Reported-by: syzbot+23f57c5ae902429285d7@syzkaller.appspotmail.com Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org> Link: https://lore.kernel.org/r/20220919215957.205681-1-tadeusz.struk@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22dt-bindings: usb: dwc2: rockchip: add rockchip,rk3128-usbJohan Jonker
Add rockchip,rk3128-usb compatible string. Signed-off-by: Johan Jonker <jbx6244@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/dfb657ab-85e5-ac47-810d-133c7e8dd823@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22dt-bindings: usb: qcom,dwc3: Fix SM6115 clocks, irqsIskren Chernev
SM6115 has 6 clocks and 2 interrupts. Signed-off-by: Iskren Chernev <iskren.chernev@gmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220919180618.1840194-5-iskren.chernev@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22usb: typec: anx7411: Use of_get_child_by_name() instead of ↵Liang He
of_find_node_by_name() In anx7411_typec_switch_probe(), we should call of_get_child_by_name() instead of of_find_node_by_name() as of_find_xxx API will decrease the refcount of the 'from' argument. Fixes: fe6d8a9c8e64 ("usb: typec: anx7411: Add Analogix PD ANX7411 support") Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Liang He <windhl@126.com> Link: https://lore.kernel.org/r/20220915092209.4009273-1-windhl@126.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22usb: gadget: add _init/__exit annotations to module init/exit funcsXiu Jianfeng
Add missing _init/__exit annotations to module init/exit funcs. Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com> Link: https://lore.kernel.org/r/20220917084413.23957-1-xiujianfeng@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22usb: dwc2: Remove redundant license textChristophe JAILLET
SPDX-License-Identifier have been added in commit 5fd54ace4721 ("USB: add SPDX identifiers to all remaining files in drivers/usb/") There is no point in keeping the now redundant license text. Remove it. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/030a7e187d707f8734a492cda7a6b54d459c4bb3.1662788747.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22usb: dwc3: Fix typos in gadget.cKushagra Verma
Fixes the following two typos: 1. reinitate -> reinitiate 2. revison -> revision Signed-off-by: Kushagra Verma <kushagra765@outlook.com> Link: https://lore.kernel.org/r/HK0PR01MB280110FAB74B4B2ACE32EA5FF8479@HK0PR01MB2801.apcprd01.prod.exchangelabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22usb: gadget: function: fix dangling pnp_string in f_printer.cAlbert Briscoe
When opts->pnp_string is changed with configfs, new memory is allocated for the string. It does not, however, update dev->pnp_string, even though the memory is freed. When rquesting the string, the host then gets old or corrupted data rather than the new string. The ieee 1284 id string should be allowed to change while the device is connected. The bug was introduced in commit fdc01cc286be ("usb: gadget: printer: Remove pnp_string static buffer"), which changed opts->pnp_string from a char[] to a char*. This patch changes dev->pnp_string from a char* to a char** pointing to opts->pnp_string. Fixes: fdc01cc286be ("usb: gadget: printer: Remove pnp_string static buffer") Signed-off-by: Albert Briscoe <albertsbriscoe@gmail.com> Link: https://lore.kernel.org/r/20220911223753.20417-1-albertsbriscoe@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22xhci: remove unused lpm_failed_dev member from struct xhci_hcdMathias Nyman
xhci used to test if link power management (LPM) capable USB2 devices really could enter and exit L1 state link state. Failed devices were added to a lpm_failed_dev list. This feature was removed 9 years ago in commit de68bab4fa96 ("usb: Don't enable USB 2.0 Link PM by default.") but lpm_failed_dev member was still left. Remove it now. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220921123450.671459-7-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22xhci: remove unused command member from struct xhci_hcd structMathias Nyman
The u32 command was added to struct xhci_hcd over 10 years ago in commit 9777e3ce907d ("USB: xHCI: bus power management implementation") It wasn't even used back then, so remove it. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220921123450.671459-6-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22xhci: show fault reason for a failed enable slot commandMathias Nyman
Show the completion code of a unsuccessful "enable slot" command. Add it in a human readable form to the existing error message. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220921123450.671459-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22xhci: Don't show warning for reinit on known broken suspendMario Limonciello
commit 8b328f8002bc ("xhci: re-initialize the HC during resume if HCE was set") introduced a new warning message when the host controller error was set and re-initializing. This is expected behavior on some designs which already set `xhci->broken_suspend` so the new warning is alarming to some users. Modify the code to only show the warning if this was a surprising behavior to the XHCI driver. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216470 Fixes: 8b328f8002bc ("xhci: re-initialize the HC during resume if HCE was set") Reported-by: Artem S. Tashkinov <aros@gmx.com> Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220921123450.671459-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22xhci: dbc: Fix memory leak in xhci_alloc_dbc()Rafael Mendonca
If DbC is already in use, then the allocated memory for the xhci_dbc struct doesn't get freed before returning NULL, which leads to a memleak. Fixes: 534675942e90 ("xhci: dbc: refactor xhci_dbc_init()") Cc: stable@vger.kernel.org Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220921123450.671459-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22usb: host: xhci: Fix potential memory leak in xhci_alloc_stream_info()Jianglei Nie
xhci_alloc_stream_info() allocates stream context array for stream_info ->stream_ctx_array with xhci_alloc_stream_ctx(). When some error occurs, stream_info->stream_ctx_array is not released, which will lead to a memory leak. We can fix it by releasing the stream_info->stream_ctx_array with xhci_free_stream_ctx() on the error path to avoid the potential memory leak. Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220921123450.671459-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22Merge tag 'usb-serial-6.1-rc1' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: "USB-serial updates for 6.1-rc1 Here are the USB-serial updates for 6.1-rc1, including: - a fix for a very long-standing FTDI SIO regression - a long-overdue cleanup of the FTDI type handling - support for new FTDI HP and HA devices Included are also various clean ups. All have been in linux-next with no reported issues." * tag 'usb-serial-6.1-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: ftdi_sio: clean up driver prefix USB: serial: ftdi_sio: move driver structure USB: serial: ftdi_sio: clean up attribute visibility logic USB: serial: console: move mutex_unlock() before usb_serial_put() USB: serial: ftdi_sio: convert to use dev_groups USB: serial: ftdi_sio: add support for HP and HA devices USB: serial: ftdi_sio: simplify divisor handling USB: serial: ftdi_sio: assume hi-speed type USB: serial: ftdi_sio: clean up baudrate request USB: serial: ftdi_sio: clean up attribute handling USB: serial: ftdi_sio: clean up modem-status handling USB: serial: ftdi_sio: tighten device-type detection USB: serial: ftdi_sio: rename channel index USB: serial: ftdi_sio: include FT2232D in type string USB: serial: ftdi_sio: rename chip types USB: serial: ftdi_sio: drop redundant chip type comments USB: serial: ftdi_sio: clean up chip type enum USB: serial: ftdi_sio: fix 300 bps rate for SIO
2022-09-22net: sunhme: Fix packet reception for len < RX_COPY_THRESHOLDSean Anderson
There is a separate receive path for small packets (under 256 bytes). Instead of allocating a new dma-capable skb to be used for the next packet, this path allocates a skb and copies the data into it (reusing the existing sbk for the next packet). There are two bytes of junk data at the beginning of every packet. I believe these are inserted in order to allow aligned DMA and IP headers. We skip over them using skb_reserve. Before copying over the data, we must use a barrier to ensure we see the whole packet. The current code only synchronizes len bytes, starting from the beginning of the packet, including the junk bytes. However, this leaves off the final two bytes in the packet. Synchronize the whole packet. To reproduce this problem, ping a HME with a payload size between 17 and 214 $ ping -s 17 <hme_address> which will complain rather loudly about the data mismatch. Small packets (below 60 bytes on the wire) do not have this issue. I suspect this is related to the padding added to increase the minimum packet size. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220920235018.1675956-1-seanga2@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-22Merge tag 'usb-serial-6.0-rc7' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: "USB-serial fixes for 6.0-rc7 Here are some new modem device ids. All have been in linux-next with no reported issues." * tag 'usb-serial-6.0-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add Quectel RM520N USB: serial: option: add Quectel BG95 0x0203 composition
2022-09-22udp: Use WARN_ON_ONCE() in udp_read_skb()Peilin Ye
Prevent udp_read_skb() from flooding the syslog. Suggested-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Peilin Ye <peilin.ye@bytedance.com> Link: https://lore.kernel.org/r/20220921005915.2697-1-yepeilin.cs@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-22Merge branch 'bonding-fix-null-deref-in-bond_rr_gen_slave_id'Jakub Kicinski
Jonathan Toppins says: ==================== bonding: fix NULL deref in bond_rr_gen_slave_id Fix a NULL dereference of the struct bonding.rr_tx_counter member because if a bond is initially created with an initial mode != zero (Round Robin) the memory required for the counter is never created and when the mode is changed there is never any attempt to verify the memory is allocated upon switching modes. ==================== Link: https://lore.kernel.org/r/cover.1663694476.git.jtoppins@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-22selftests: bonding: cause oops in bond_rr_gen_slave_idJonathan Toppins
This bonding selftest used to cause a kernel oops on aarch64 and should be architectures agnostic. Signed-off-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-22bonding: fix NULL deref in bond_rr_gen_slave_idJonathan Toppins
Fix a NULL dereference of the struct bonding.rr_tx_counter member because if a bond is initially created with an initial mode != zero (Round Robin) the memory required for the counter is never created and when the mode is changed there is never any attempt to verify the memory is allocated upon switching modes. This causes the following Oops on an aarch64 machine: [ 334.686773] Unable to handle kernel paging request at virtual address ffff2c91ac905000 [ 334.694703] Mem abort info: [ 334.697486] ESR = 0x0000000096000004 [ 334.701234] EC = 0x25: DABT (current EL), IL = 32 bits [ 334.706536] SET = 0, FnV = 0 [ 334.709579] EA = 0, S1PTW = 0 [ 334.712719] FSC = 0x04: level 0 translation fault [ 334.717586] Data abort info: [ 334.720454] ISV = 0, ISS = 0x00000004 [ 334.724288] CM = 0, WnR = 0 [ 334.727244] swapper pgtable: 4k pages, 48-bit VAs, pgdp=000008044d662000 [ 334.733944] [ffff2c91ac905000] pgd=0000000000000000, p4d=0000000000000000 [ 334.740734] Internal error: Oops: 96000004 [#1] SMP [ 334.745602] Modules linked in: bonding tls veth rfkill sunrpc arm_spe_pmu vfat fat acpi_ipmi ipmi_ssif ixgbe igb i40e mdio ipmi_devintf ipmi_msghandler arm_cmn arm_dsu_pmu cppc_cpufreq acpi_tad fuse zram crct10dif_ce ast ghash_ce sbsa_gwdt nvme drm_vram_helper drm_ttm_helper nvme_core ttm xgene_hwmon [ 334.772217] CPU: 7 PID: 2214 Comm: ping Not tainted 6.0.0-rc4-00133-g64ae13ed4784 #4 [ 334.779950] Hardware name: GIGABYTE R272-P31-00/MP32-AR1-00, BIOS F18v (SCP: 1.08.20211002) 12/01/2021 [ 334.789244] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 334.796196] pc : bond_rr_gen_slave_id+0x40/0x124 [bonding] [ 334.801691] lr : bond_xmit_roundrobin_slave_get+0x38/0xdc [bonding] [ 334.807962] sp : ffff8000221733e0 [ 334.811265] x29: ffff8000221733e0 x28: ffffdbac8572d198 x27: ffff80002217357c [ 334.818392] x26: 000000000000002a x25: ffffdbacb33ee000 x24: ffff07ff980fa000 [ 334.825519] x23: ffffdbacb2e398ba x22: ffff07ff98102000 x21: ffff07ff981029c0 [ 334.832646] x20: 0000000000000001 x19: ffff07ff981029c0 x18: 0000000000000014 [ 334.839773] x17: 0000000000000000 x16: ffffdbacb1004364 x15: 0000aaaabe2f5a62 [ 334.846899] x14: ffff07ff8e55d968 x13: ffff07ff8e55db30 x12: 0000000000000000 [ 334.854026] x11: ffffdbacb21532e8 x10: 0000000000000001 x9 : ffffdbac857178ec [ 334.861153] x8 : ffff07ff9f6e5a28 x7 : 0000000000000000 x6 : 000000007c2b3742 [ 334.868279] x5 : ffff2c91ac905000 x4 : ffff2c91ac905000 x3 : ffff07ff9f554400 [ 334.875406] x2 : ffff2c91ac905000 x1 : 0000000000000001 x0 : ffff07ff981029c0 [ 334.882532] Call trace: [ 334.884967] bond_rr_gen_slave_id+0x40/0x124 [bonding] [ 334.890109] bond_xmit_roundrobin_slave_get+0x38/0xdc [bonding] [ 334.896033] __bond_start_xmit+0x128/0x3a0 [bonding] [ 334.901001] bond_start_xmit+0x54/0xb0 [bonding] [ 334.905622] dev_hard_start_xmit+0xb4/0x220 [ 334.909798] __dev_queue_xmit+0x1a0/0x720 [ 334.913799] arp_xmit+0x3c/0xbc [ 334.916932] arp_send_dst+0x98/0xd0 [ 334.920410] arp_solicit+0xe8/0x230 [ 334.923888] neigh_probe+0x60/0xb0 [ 334.927279] __neigh_event_send+0x3b0/0x470 [ 334.931453] neigh_resolve_output+0x70/0x90 [ 334.935626] ip_finish_output2+0x158/0x514 [ 334.939714] __ip_finish_output+0xac/0x1a4 [ 334.943800] ip_finish_output+0x40/0xfc [ 334.947626] ip_output+0xf8/0x1a4 [ 334.950931] ip_send_skb+0x5c/0x100 [ 334.954410] ip_push_pending_frames+0x3c/0x60 [ 334.958758] raw_sendmsg+0x458/0x6d0 [ 334.962325] inet_sendmsg+0x50/0x80 [ 334.965805] sock_sendmsg+0x60/0x6c [ 334.969286] __sys_sendto+0xc8/0x134 [ 334.972853] __arm64_sys_sendto+0x34/0x4c [ 334.976854] invoke_syscall+0x78/0x100 [ 334.980594] el0_svc_common.constprop.0+0x4c/0xf4 [ 334.985287] do_el0_svc+0x38/0x4c [ 334.988591] el0_svc+0x34/0x10c [ 334.991724] el0t_64_sync_handler+0x11c/0x150 [ 334.996072] el0t_64_sync+0x190/0x194 [ 334.999726] Code: b9001062 f9403c02 d53cd044 8b040042 (b8210040) [ 335.005810] ---[ end trace 0000000000000000 ]--- [ 335.010416] Kernel panic - not syncing: Oops: Fatal exception in interrupt [ 335.017279] SMP: stopping secondary CPUs [ 335.021374] Kernel Offset: 0x5baca8eb0000 from 0xffff800008000000 [ 335.027456] PHYS_OFFSET: 0x80000000 [ 335.030932] CPU features: 0x0000,0085c029,19805c82 [ 335.035713] Memory Limit: none [ 335.038756] Rebooting in 180 seconds.. The fix is to allocate the memory in bond_open() which is guaranteed to be called before any packets are processed. Fixes: 848ca9182a7d ("net: bonding: Use per-cpu rr_tx_counter") CC: Jussi Maki <joamaki@gmail.com> Signed-off-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-22net: phy: micrel: fix shared interrupt on LAN8814Michael Walle
Since commit ece19502834d ("net: phy: micrel: 1588 support for LAN8814 phy") the handler always returns IRQ_HANDLED, except in an error case. Before that commit, the interrupt status register was checked and if it was empty, IRQ_NONE was returned. Restore that behavior to play nice with the interrupt line being shared with others. Fixes: ece19502834d ("net: phy: micrel: 1588 support for LAN8814 phy") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: Divya Koppera <Divya.Koppera@microchip.com> Link: https://lore.kernel.org/r/20220920141619.808117-1-michael@walle.cc Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-22perf/arm-cmn: Add more bits to child node address offset fieldIlkka Koskinen
CMN-600 uses bits [27:0] for child node address offset while bits [30:28] are required to be zero. For CMN-650, the child node address offset field has been increased to include bits [29:0] while leaving only bit 30 set to zero. Let's include the missing two bits and assume older implementations comply with the spec and set bits [29:28] to 0. Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com> Fixes: 60d1504070c2 ("perf/arm-cmn: Support new IP features") Reviewed-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/20220808195455.79277-1-ilkka@os.amperecomputing.com Signed-off-by: Will Deacon <will@kernel.org>
2022-09-22usb: typec: anx7411: Fix build error without CONFIG_POWER_SUPPLYRen Zhijie
Building without CONFIG_POWER_SUPPLY will fail: drivers/usb/typec/anx7411.o: In function `anx7411_detect_power_mode': anx7411.c:(.text+0x527): undefined reference to `power_supply_changed' drivers/usb/typec/anx7411.o: In function `anx7411_psy_set_prop': anx7411.c:(.text+0x90d): undefined reference to `power_supply_get_drvdata' anx7411.c:(.text+0x930): undefined reference to `power_supply_changed' drivers/usb/typec/anx7411.o: In function `anx7411_psy_get_prop': anx7411.c:(.text+0x94d): undefined reference to `power_supply_get_drvdata' drivers/usb/typec/anx7411.o: In function `anx7411_i2c_probe': anx7411.c:(.text+0x111d): undefined reference to `devm_power_supply_register' drivers/usb/typec/anx7411.o: In function `anx7411_work_func': anx7411.c:(.text+0x167c): undefined reference to `power_supply_changed' anx7411.c:(.text+0x1b55): undefined reference to `power_supply_changed' Add POWER_SUPPLY dependency to Kconfig. Fixes: fe6d8a9c8e64 ("usb: typec: anx7411: Add Analogix PD ANX7411 support") Reviewed-by: Xin Ji <xji@analogixsemi.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Ren Zhijie <renzhijie2@huawei.com> Link: https://lore.kernel.org/r/20220920084431.196258-1-renzhijie2@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22counter: 104-quad-8: Fix skipped IRQ lines during events configurationWilliam Breathitt Gray
IRQ trigger configuration is skipped if it has already been set before; however, the IRQ line still needs to be OR'd to irq_enabled because irq_enabled is reset for every events_configure call. This patch moves the irq_enabled OR operation update to before the irq_trigger check so that IRQ line enablement is not skipped. Fixes: c95cc0d95702 ("counter: 104-quad-8: Fix persistent enabled events bug") Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20220815122301.2750-1-william.gray@linaro.org/ Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/179eed11eaf225dbd908993b510df0c8f67b1230.1663844776.git.william.gray@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22arm64: topology: fix possible overflow in amu_fie_setup()Sergey Shtylyov
cpufreq_get_hw_max_freq() returns max frequency in kHz as *unsigned int*, while freq_inv_set_max_ratio() gets passed this frequency in Hz as 'u64'. Multiplying max frequency by 1000 can potentially result in overflow -- multiplying by 1000ULL instead should avoid that... Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Fixes: cd0ed03a8903 ("arm64: use activity monitors for frequency invariance") Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/01493d64-2bce-d968-86dc-11a122a9c07d@omp.ru Signed-off-by: Will Deacon <will@kernel.org>
2022-09-22arm64: mm: don't acquire mutex when rewriting swapperMark Rutland
Since commit: 47546a1912fc4a03 ("arm64: mm: install KPTI nG mappings with MMU enabled)" ... when building with CONFIG_DEBUG_ATOMIC_SLEEP=y and booting under QEMU TCG with '-cpu max', there's a boot-time splat: | BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580 | in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 15, name: migration/0 | preempt_count: 1, expected: 0 | RCU nest depth: 0, expected: 0 | no locks held by migration/0/15. | irq event stamp: 28 | hardirqs last enabled at (27): [<ffff8000091ed180>] _raw_spin_unlock_irq+0x3c/0x7c | hardirqs last disabled at (28): [<ffff8000081b8d74>] multi_cpu_stop+0x150/0x18c | softirqs last enabled at (0): [<ffff80000809a314>] copy_process+0x594/0x1964 | softirqs last disabled at (0): [<0000000000000000>] 0x0 | CPU: 0 PID: 15 Comm: migration/0 Not tainted 6.0.0-rc3-00002-g419b42ff7eef #3 | Hardware name: linux,dummy-virt (DT) | Stopper: multi_cpu_stop+0x0/0x18c <- stop_cpus.constprop.0+0xa0/0xfc | Call trace: | dump_backtrace.part.0+0xd0/0xe0 | show_stack+0x1c/0x5c | dump_stack_lvl+0x88/0xb4 | dump_stack+0x1c/0x38 | __might_resched+0x180/0x230 | __might_sleep+0x4c/0xa0 | __mutex_lock+0x5c/0x450 | mutex_lock_nested+0x30/0x40 | create_kpti_ng_temp_pgd+0x4fc/0x6d0 | kpti_install_ng_mappings+0x2b8/0x3b0 | cpu_enable_non_boot_scope_capabilities+0x7c/0xd0 | multi_cpu_stop+0xa0/0x18c | cpu_stopper_thread+0x88/0x11c | smpboot_thread_fn+0x1ec/0x290 | kthread+0x118/0x120 | ret_from_fork+0x10/0x20 Since commit: ee017ee353506fce ("arm64/mm: avoid fixmap race condition when create pud mapping") ... once the kernel leave the SYSTEM_BOOTING state, the fixmap pagetable entries are protected by the fixmap_lock mutex. The new KPTI rewrite code uses __create_pgd_mapping() to create a temporary pagetable. This happens in atomic context, after secondary CPUs are brought up and the kernel has left the SYSTEM_BOOTING state. Hence we try to acquire a mutex in atomic context, which is generally unsound (though benign in this case as the mutex should be free and all other CPUs are quiescent). This patch avoids the issue by pulling the mutex out of alloc_init_pud() and calling it at a higher level in the pagetable manipulation code. This allows it to be used without locking where one CPU is known to be in exclusive control of the machine, even after having left the SYSTEM_BOOTING state. Fixes: 47546a1912fc ("arm64: mm: install KPTI nG mappings with MMU enabled") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20220920134731.1625740-1-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2022-09-22drivers/base: Fix unsigned comparison to -1 in CPUMAP_FILE_MAX_BYTESPhil Auld
As PAGE_SIZE is unsigned long, -1 > PAGE_SIZE when NR_CPUS <= 3. This leads to very large file sizes: topology$ ls -l total 0 -r--r--r-- 1 root root 18446744073709551615 Sep 5 11:59 core_cpus -r--r--r-- 1 root root 4096 Sep 5 11:59 core_cpus_list -r--r--r-- 1 root root 4096 Sep 5 10:58 core_id -r--r--r-- 1 root root 18446744073709551615 Sep 5 10:10 core_siblings -r--r--r-- 1 root root 4096 Sep 5 11:59 core_siblings_list -r--r--r-- 1 root root 18446744073709551615 Sep 5 11:59 die_cpus -r--r--r-- 1 root root 4096 Sep 5 11:59 die_cpus_list -r--r--r-- 1 root root 4096 Sep 5 11:59 die_id -r--r--r-- 1 root root 18446744073709551615 Sep 5 11:59 package_cpus -r--r--r-- 1 root root 4096 Sep 5 11:59 package_cpus_list -r--r--r-- 1 root root 4096 Sep 5 10:58 physical_package_id -r--r--r-- 1 root root 18446744073709551615 Sep 5 10:10 thread_siblings -r--r--r-- 1 root root 4096 Sep 5 11:59 thread_siblings_list Adjust the inequality to catch the case when NR_CPUS is configured to a small value. Fixes: 7ee951acd31a ("drivers/base: fix userspace break from using bin_attributes for cpumap and cpulist") Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Yury Norov <yury.norov@gmail.com> Cc: stable@vger.kernel.org Cc: feng xiangjun <fengxj325@gmail.com> Reported-by: feng xiangjun <fengxj325@gmail.com> Signed-off-by: Phil Auld <pauld@redhat.com> Signed-off-by: Yury Norov <yury.norov@gmail.com> Link: https://lore.kernel.org/r/20220906203542.1796629-1-pauld@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22net/smc: Stop the CLC flow if no link to map buffers onWen Gu
There might be a potential race between SMC-R buffer map and link group termination. smc_smcr_terminate_all() | smc_connect_rdma() -------------------------------------------------------------- | smc_conn_create() for links in smcibdev | schedule links down | | smc_buf_create() | \- smcr_buf_map_usable_links() | \- no usable links found, | (rmb->mr = NULL) | | smc_clc_send_confirm() | \- access conn->rmb_desc->mr[]->rkey | (panic) During reboot and IB device module remove, all links will be set down and no usable links remain in link groups. In such situation smcr_buf_map_usable_links() should return an error and stop the CLC flow accessing to uninitialized mr. Fixes: b9247544c1bc ("net/smc: convert static link ID instances to support multiple links") Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Link: https://lore.kernel.org/r/1663656189-32090-1-git-send-email-guwen@linux.alibaba.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-22media: flexcop-usb: fix endpoint type checkJohan Hovold
Commit d725d20e81c2 ("media: flexcop-usb: sanity checking of endpoint type") tried to add an endpoint type sanity check for the single isochronous endpoint but instead broke the driver by checking the wrong descriptor or random data beyond the last endpoint descriptor. Make sure to check the right endpoint descriptor. Fixes: d725d20e81c2 ("media: flexcop-usb: sanity checking of endpoint type") Cc: Oliver Neukum <oneukum@suse.com> Cc: stable@vger.kernel.org # 5.9 Reported-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20220822151027.27026-1-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-22efi: libstub: check Shim mode using MokSBStateRTArd Biesheuvel
We currently check the MokSBState variable to decide whether we should treat UEFI secure boot as being disabled, even if the firmware thinks otherwise. This is used by shim to indicate that it is not checking signatures on boot images. In the kernel, we use this to relax lockdown policies. However, in cases where shim is not even being used, we don't want this variable to interfere with lockdown, given that the variable may be non-volatile and therefore persist across a reboot. This means setting it once will persistently disable lockdown checks on a given system. So switch to the mirrored version of this variable, called MokSBStateRT, which is supposed to be volatile, and this is something we can check. Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Peter Jones <pjones@redhat.com>
2022-09-22efi: x86: Wipe setup_data on pure EFI bootArd Biesheuvel
When booting the x86 kernel via EFI using the LoadImage/StartImage boot services [as opposed to the deprecated EFI handover protocol], the setup header is taken from the image directly, and given that EFI's LoadImage has no Linux/x86 specific knowledge regarding struct bootparams or struct setup_header, any absolute addresses in the setup header must originate from the file and not from a prior loading stage. Since we cannot generally predict where LoadImage() decides to load an image (*), such absolute addresses must be treated as suspect: even if a prior boot stage intended to make them point somewhere inside the [signed] image, there is no way to validate that, and if they point at an arbitrary location in memory, the setup_data nodes will not be covered by any signatures or TPM measurements either, and could be made to contain an arbitrary sequence of SETUP_xxx nodes, which could interfere quite badly with the early x86 boot sequence. (*) Note that, while LoadImage() does take a buffer/size tuple in addition to a device path, which can be used to provide the image contents directly, it will re-allocate such images, as the memory footprint of an image is generally larger than the PE/COFF file representation. Cc: <stable@vger.kernel.org> # v5.10+ Link: https://lore.kernel.org/all/20220904165321.1140894-1-Jason@zx2c4.com/ Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-09-22Merge tag 'drm-intel-fixes-2022-09-21' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes 2 gem context related fixes: - to avoid a general protection failure when using perf/OA (Chris) - to avoid kernel warnings on driver release (Janusz) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/Yyt1CV+YIjKQZZMB@intel.com
2022-09-21ext4: use buckets for cr 1 block scan instead of rbtreeJan Kara
Using rbtree for sorting groups by average fragment size is relatively expensive (needs rbtree update on every block freeing or allocation) and leads to wide spreading of allocations because selection of block group is very sentitive both to changes in free space and amount of blocks allocated. Furthermore selecting group with the best matching average fragment size is not necessary anyway, even more so because the variability of fragment sizes within a group is likely large so average is not telling much. We just need a group with large enough average fragment size so that we have high probability of finding large enough free extent and we don't want average fragment size to be too big so that we are likely to find free extent only somewhat larger than what we need. So instead of maintaing rbtree of groups sorted by fragment size keep bins (lists) or groups where average fragment size is in the interval [2^i, 2^(i+1)). This structure requires less updates on block allocation / freeing, generally avoids chaotic spreading of allocations into block groups, and still is able to quickly (even faster that the rbtree) provide a block group which is likely to have a suitably sized free space extent. This patch reduces number of block groups used when untarring archive with medium sized files (size somewhat above 64k which is default mballoc limit for avoiding locality group preallocation) to about half and thus improves write speeds for eMMC flash significantly. Fixes: 196e402adf2e ("ext4: improve cr 0 / cr 1 group scanning") CC: stable@kernel.org Reported-and-tested-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com> Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/ Link: https://lore.kernel.org/r/20220908092136.11770-5-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-09-21ext4: use locality group preallocation for small closed filesJan Kara
Curently we don't use any preallocation when a file is already closed when allocating blocks (from writeback code when converting delayed allocation). However for small files, using locality group preallocation is actually desirable as that is not specific to a particular file. Rather it is a method to pack small files together to reduce fragmentation and for that the fact the file is closed is actually even stronger hint the file would benefit from packing. So change the logic to allow locality group preallocation in this case. Fixes: 196e402adf2e ("ext4: improve cr 0 / cr 1 group scanning") CC: stable@kernel.org Reported-and-tested-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com> Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/ Link: https://lore.kernel.org/r/20220908092136.11770-4-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-09-21ext4: make directory inode spreading reflect flexbg sizeJan Kara
Currently the Orlov inode allocator searches for free inodes for a directory only in flex block groups with at most inodes_per_group/16 more directory inodes than average per flex block group. However with growing size of flex block group this becomes unnecessarily strict. Scale allowed difference from average directory count per flex block group with flex block group size as we do with other metrics. Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com> Cc: stable@kernel.org Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/ Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220908092136.11770-3-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-09-21ext4: avoid unnecessary spreading of allocations among groupsJan Kara
mb_set_largest_free_order() updates lists containing groups with largest chunk of free space of given order. The way it updates it leads to always moving the group to the tail of the list. Thus allocations looking for free space of given order effectively end up cycling through all groups (and due to initialization in last to first order). This spreads allocations among block groups which reduces performance for rotating disks or low-end flash media. Change mb_set_largest_free_order() to only update lists if the order of the largest free chunk in the group changed. Fixes: 196e402adf2e ("ext4: improve cr 0 / cr 1 group scanning") CC: stable@kernel.org Reported-and-tested-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com> Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/ Link: https://lore.kernel.org/r/20220908092136.11770-2-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-09-21ext4: make mballoc try target group first even with mb_optimize_scanJan Kara
One of the side-effects of mb_optimize_scan was that the optimized functions to select next group to try were called even before we tried the goal group. As a result we no longer allocate files close to corresponding inodes as well as we don't try to expand currently allocated extent in the same group. This results in reaim regression with workfile.disk workload of upto 8% with many clients on my test machine: baseline mb_optimize_scan Hmean disk-1 2114.16 ( 0.00%) 2099.37 ( -0.70%) Hmean disk-41 87794.43 ( 0.00%) 83787.47 * -4.56%* Hmean disk-81 148170.73 ( 0.00%) 135527.05 * -8.53%* Hmean disk-121 177506.11 ( 0.00%) 166284.93 * -6.32%* Hmean disk-161 220951.51 ( 0.00%) 207563.39 * -6.06%* Hmean disk-201 208722.74 ( 0.00%) 203235.59 ( -2.63%) Hmean disk-241 222051.60 ( 0.00%) 217705.51 ( -1.96%) Hmean disk-281 252244.17 ( 0.00%) 241132.72 * -4.41%* Hmean disk-321 255844.84 ( 0.00%) 245412.84 * -4.08%* Also this is causing huge regression (time increased by a factor of 5 or so) when untarring archive with lots of small files on some eMMC storage cards. Fix the problem by making sure we try goal group first. Fixes: 196e402adf2e ("ext4: improve cr 0 / cr 1 group scanning") CC: stable@kernel.org Reported-and-tested-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com> Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Link: https://lore.kernel.org/all/20220727105123.ckwrhbilzrxqpt24@quack3/ Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/ Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220908092136.11770-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2022-09-21Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-09-20 (ice) Michal re-sets TC configuration when changing number of queues. Mateusz moves the check and call for link-down-on-close to the specific path for downing/closing the interface. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ice: Fix interface being down after reset with link-down-on-close flag on ice: config netdev tc before setting queues number ==================== Link: https://lore.kernel.org/r/20220920205344.1860934-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-21ice: Fix ice_xdp_xmit() when XDP TX queue number is not sufficientLarysa Zaremba
The original patch added the static branch to handle the situation, when assigning an XDP TX queue to every CPU is not possible, so they have to be shared. However, in the XDP transmit handler ice_xdp_xmit(), an error was returned in such cases even before static condition was checked, thus making queue sharing still impossible. Fixes: 22bf877e528f ("ice: introduce XDP_TX fallback path") Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Link: https://lore.kernel.org/r/20220919134346.25030-1-larysa.zaremba@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-21Merge branch '40GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-09-19 (iavf, i40e) Norbert adds checking of buffer size for Rx buffer checks in iavf. Michal corrects setting of max MTU in iavf to account for MTU data provided by PF, fixes i40e to set VF max MTU, and resolves lack of rate limiting when value was less than divisor for i40e. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: i40e: Fix set max_tx_rate when it is lower than 1 Mbps i40e: Fix VF set max MTU size iavf: Fix set max MTU size with port VLAN and jumbo frames iavf: Fix bad page state ==================== Link: https://lore.kernel.org/r/20220919223428.572091-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-22drm/mediatek: dsi: Move mtk_dsi_stop() call back to mtk_dsi_poweroff()Nícolas F. R. A. Prado
As the comment right before the mtk_dsi_stop() call advises, mtk_dsi_stop() should only be called after mtk_drm_crtc_atomic_disable(). That's because that function calls drm_crtc_wait_one_vblank(), which requires the vblank irq to be enabled. Previously mtk_dsi_stop(), being in mtk_dsi_poweroff() and guarded by a refcount, would only be called at the end of mtk_drm_crtc_atomic_disable(), through the call to mtk_crtc_ddp_hw_fini(). Commit cde7e2e35c28 ("drm/mediatek: Separate poweron/poweroff from enable/disable and define new funcs") moved the mtk_dsi_stop() call to mtk_output_dsi_disable(), causing it to be called before mtk_drm_crtc_atomic_disable(), and consequently generating vblank timeout warnings during suspend. Move the mtk_dsi_stop() call back to mtk_dsi_poweroff() so that we have a working vblank irq during mtk_drm_crtc_atomic_disable() and stop getting vblank timeout warnings. Fixes: cde7e2e35c28 ("drm/mediatek: Separate poweron/poweroff from enable/disable and define new funcs") Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Tested-by: Hsin-Yi Wang <hsinyi@chromium.org> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Tested-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com> Link: http://lists.infradead.org/pipermail/linux-mediatek/2022-August/046713.html Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
2022-09-21drm/amd/display: Reduce number of arguments of dml314's CalculateFlipSchedule()Nathan Chancellor
Most of the arguments are identical between the two call sites and they can be accessed through the 'struct vba_vars_st' pointer. This reduces the total amount of stack space that dml314_ModeSupportAndSystemConfigurationFull() uses by 112 bytes with LLVM 16 (1976 -> 1864), helping clear up the following clang warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn314/display_mode_vba_314.c:4020:6: error: stack frame size (2216) exceeds limit (2048) in 'dml314_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] void dml314_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) ^ 1 error generated. Link: https://github.com/ClangBuiltLinux/linux/issues/1710 Reported-by: "kernelci.org bot" <bot@kernelci.org> Tested-by: Maíra Canal <mairacanal@riseup.net> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-21drm/amd/display: Reduce number of arguments of dml314's ↵Nathan Chancellor
CalculateWatermarksAndDRAMSpeedChangeSupport() Most of the arguments are identical between the two call sites and they can be accessed through the 'struct vba_vars_st' pointer. This reduces the total amount of stack space that dml314_ModeSupportAndSystemConfigurationFull() uses by 240 bytes with LLVM 16 (2216 -> 1976), helping clear up the following clang warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn314/display_mode_vba_314.c:4020:6: error: stack frame size (2216) exceeds limit (2048) in 'dml314_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than] void dml314_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib) ^ 1 error generated. Link: https://github.com/ClangBuiltLinux/linux/issues/1710 Reported-by: "kernelci.org bot" <bot@kernelci.org> Tested-by: Maíra Canal <mairacanal@riseup.net> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-21drm/amdgpu: don't register a dirty callback for non-atomicAlex Deucher
Some asics still support non-atomic code paths. Fixes: 66f99628eb2440 ("drm/amdgpu: use dirty framebuffer helper") Reported-by: Arthur Marsh <arthur.marsh@internode.on.net> Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2022-09-21drm/amd/pm: drop the pptable related workarounds for SMU 13.0.0Evan Quan
The pptable in the vbios is fully ready. The related workarounds in driver are not needed any more. Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 13:27:50 +0000