summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-04-04Merge branch 'raw-ping-fix-locking-in-proc-net-raw-icmp'Jakub Kicinski
Kuniyuki Iwashima says: ==================== raw/ping: Fix locking in /proc/net/{raw,icmp}. The first patch fixes a NULL deref for /proc/net/raw and second one fixes the same issue for ping sockets. The first patch also converts hlist_nulls to hlist, but this is because the current code uses sk_nulls_for_each() for lockless readers, instead of sk_nulls_for_each_rcu() which adds memory barrier, but raw sockets does not use the nulls marker nor SLAB_TYPESAFE_BY_RCU in the first place. OTOH, the ping sockets already uses sk_nulls_for_each_rcu(), and such conversion can be posted later for net-next. ==================== Link: https://lore.kernel.org/r/20230403194959.48928-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-04ping: Fix potentail NULL deref for /proc/net/icmp.Kuniyuki Iwashima
After commit dbca1596bbb0 ("ping: convert to RCU lookups, get rid of rwlock"), we use RCU for ping sockets, but we should use spinlock for /proc/net/icmp to avoid a potential NULL deref mentioned in the previous patch. Let's go back to using spinlock there. Note we can convert ping sockets to use hlist instead of hlist_nulls because we do not use SLAB_TYPESAFE_BY_RCU for ping sockets. Fixes: dbca1596bbb0 ("ping: convert to RCU lookups, get rid of rwlock") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-04raw: Fix NULL deref in raw_get_next().Kuniyuki Iwashima
Dae R. Jeong reported a NULL deref in raw_get_next() [0]. It seems that the repro was running these sequences in parallel so that one thread was iterating on a socket that was being freed in another netns. unshare(0x40060200) r0 = syz_open_procfs(0x0, &(0x7f0000002080)='net/raw\x00') socket$inet_icmp_raw(0x2, 0x3, 0x1) pread64(r0, &(0x7f0000000000)=""/10, 0xa, 0x10000000007f) After commit 0daf07e52709 ("raw: convert raw sockets to RCU"), we use RCU and hlist_nulls_for_each_entry() to iterate over SOCK_RAW sockets. However, we should use spinlock for slow paths to avoid the NULL deref. Also, SOCK_RAW does not use SLAB_TYPESAFE_BY_RCU, and the slab object is not reused during iteration in the grace period. In fact, the lockless readers do not check the nulls marker with get_nulls_value(). So, SOCK_RAW should use hlist instead of hlist_nulls. Instead of adding an unnecessary barrier by sk_nulls_for_each_rcu(), let's convert hlist_nulls to hlist and use sk_for_each_rcu() for fast paths and sk_for_each() and spinlock for /proc/net/raw. [0]: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] CPU: 2 PID: 20952 Comm: syz-executor.0 Not tainted 6.2.0-g048ec869bafd-dirty #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 RIP: 0010:read_pnet include/net/net_namespace.h:383 [inline] RIP: 0010:sock_net include/net/sock.h:649 [inline] RIP: 0010:raw_get_next net/ipv4/raw.c:974 [inline] RIP: 0010:raw_get_idx net/ipv4/raw.c:986 [inline] RIP: 0010:raw_seq_start+0x431/0x800 net/ipv4/raw.c:995 Code: ef e8 33 3d 94 f7 49 8b 6d 00 4c 89 ef e8 b7 65 5f f7 49 89 ed 49 83 c5 98 0f 84 9a 00 00 00 48 83 c5 c8 48 89 e8 48 c1 e8 03 <42> 80 3c 30 00 74 08 48 89 ef e8 00 3d 94 f7 4c 8b 7d 00 48 89 ef RSP: 0018:ffffc9001154f9b0 EFLAGS: 00010206 RAX: 0000000000000005 RBX: 1ffff1100302c8fd RCX: 0000000000000000 RDX: 0000000000000028 RSI: ffffc9001154f988 RDI: ffffc9000f77a338 RBP: 0000000000000029 R08: ffffffff8a50ffb4 R09: fffffbfff24b6bd9 R10: fffffbfff24b6bd9 R11: 0000000000000000 R12: ffff88801db73b78 R13: fffffffffffffff9 R14: dffffc0000000000 R15: 0000000000000030 FS: 00007f843ae8e700(0000) GS:ffff888063700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055bb9614b35f CR3: 000000003c672000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> seq_read_iter+0x4c6/0x10f0 fs/seq_file.c:225 seq_read+0x224/0x320 fs/seq_file.c:162 pde_read fs/proc/inode.c:316 [inline] proc_reg_read+0x23f/0x330 fs/proc/inode.c:328 vfs_read+0x31e/0xd30 fs/read_write.c:468 ksys_pread64 fs/read_write.c:665 [inline] __do_sys_pread64 fs/read_write.c:675 [inline] __se_sys_pread64 fs/read_write.c:672 [inline] __x64_sys_pread64+0x1e9/0x280 fs/read_write.c:672 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x4e/0xa0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x478d29 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f843ae8dbe8 EFLAGS: 00000246 ORIG_RAX: 0000000000000011 RAX: ffffffffffffffda RBX: 0000000000791408 RCX: 0000000000478d29 RDX: 000000000000000a RSI: 0000000020000000 RDI: 0000000000000003 RBP: 00000000f477909a R08: 0000000000000000 R09: 0000000000000000 R10: 000010000000007f R11: 0000000000000246 R12: 0000000000791740 R13: 0000000000791414 R14: 0000000000791408 R15: 00007ffc2eb48a50 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:read_pnet include/net/net_namespace.h:383 [inline] RIP: 0010:sock_net include/net/sock.h:649 [inline] RIP: 0010:raw_get_next net/ipv4/raw.c:974 [inline] RIP: 0010:raw_get_idx net/ipv4/raw.c:986 [inline] RIP: 0010:raw_seq_start+0x431/0x800 net/ipv4/raw.c:995 Code: ef e8 33 3d 94 f7 49 8b 6d 00 4c 89 ef e8 b7 65 5f f7 49 89 ed 49 83 c5 98 0f 84 9a 00 00 00 48 83 c5 c8 48 89 e8 48 c1 e8 03 <42> 80 3c 30 00 74 08 48 89 ef e8 00 3d 94 f7 4c 8b 7d 00 48 89 ef RSP: 0018:ffffc9001154f9b0 EFLAGS: 00010206 RAX: 0000000000000005 RBX: 1ffff1100302c8fd RCX: 0000000000000000 RDX: 0000000000000028 RSI: ffffc9001154f988 RDI: ffffc9000f77a338 RBP: 0000000000000029 R08: ffffffff8a50ffb4 R09: fffffbfff24b6bd9 R10: fffffbfff24b6bd9 R11: 0000000000000000 R12: ffff88801db73b78 R13: fffffffffffffff9 R14: dffffc0000000000 R15: 0000000000000030 FS: 00007f843ae8e700(0000) GS:ffff888063700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f92ff166000 CR3: 000000003c672000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 0daf07e52709 ("raw: convert raw sockets to RCU") Reported-by: syzbot <syzkaller@googlegroups.com> Reported-by: Dae R. Jeong <threeearcat@gmail.com> Link: https://lore.kernel.org/netdev/ZCA2mGV_cmq7lIfV@dragonet/ Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-04-04Merge branch 'for-6.3/cxl-doe-fixes' into for-6.3/cxlDan Williams
Pick up the fixes (first 6 patches) from the DOE rework series from Lukas for v6.3-rc. Link: https://lore.kernel.org/all/cover.1678543498.git.lukas@wunner.de/
2023-04-04cxl/hdm: Extend DVSEC range register emulation for region enumerationDan Williams
One motivation for mapping range registers to decoder objects is to use those settings for region autodiscovery. The need to map a region for devices programmed to use range registers is especially urgent now that the kernel no longer routes "Soft Reserved" ranges in the memory map to device-dax by default. The CXL memory range loses all access mechanisms. Complete the implementation by marking the DPA reservation and setting the endpoint-decoder state to signal autodiscovery. Note that the default settings of ways=1 and granularity=4096 set in cxl_decode_init() do not need to be updated. Fixes: 09d09e04d2fc ("cxl/dax: Create dax devices for CXL RAM regions") Tested-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Gregory Price <gregory.price@memverge.com> Link: https://lore.kernel.org/r/168012575521.221280.14177293493678527326.stgit@dwillia2-xfh.jf.intel.com Reviewed-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-04-04cxl/hdm: Limit emulation to the number of range registersDan Williams
Recall that range register emulation seeks to treat the 2 potential range registers as Linux CXL "decoder" objects. The number of range registers can be 1 or 2, while HDM decoder ranges can include more than 2. Be careful not to confuse DVSEC range count with HDM capability decoder count. Commit to range register earlier in devm_cxl_setup_hdm(). Otherwise, a device with more HDM decoders than range registers can set @cxlhdm->decoder_count to an invalid value. Avoid introducing a forward declaration by just moving the definition of should_emulate_decoders() earlier in the file. should_emulate_decoders() is unchanged. Tested-by: Dave Jiang <dave.jiang@intel.com> Fixes: d7a2153762c7 ("cxl/hdm: Add emulation when HDM decoders are not committed") Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/168012574932.221280.15944705098679646436.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-04-04cxl/region: Move coherence tracking into cxl_region_attach()Dan Williams
Each time the contents of a given HPA are potentially changed in a cache incoherent manner the CXL core sets CXL_REGION_F_INCOHERENT to invalidate CPU caches before the region is used. Successful invocation of attach_target() indicates that DPA has been newly assigned to a given HPA in the dynamic region creation flow. However, attach_target() is also reused in the autodiscovery flow where the region was activated by platform firmware. In that case there is no need to invalidate caches because that region is already in active use and nothing about the autodiscovery flow modifies the HPA-to-DPA relationship. In the autodiscovery case cxl_region_attach() exits early after determining the endpoint decoder is already correctly attached to the region. Fixes: a32320b71f08 ("cxl/region: Add region autodiscovery") Reviewed-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/168002858817.50647.1217607907088920888.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-04-04cxl/region: Fix region setup/teardown for RCDsDan Williams
RCDs (CXL memory devices that link train without VH capability and show up as root complex integrated endpoints), hide the presence of the link between the endpoint and the host-bridge. The CXL region setup/teardown paths assume that a link hop is present and go looking for at least one 'struct cxl_port' instance between the CXL root port-object and an endpoint port-object leading to crashes of the form: BUG: kernel NULL pointer dereference, address: 0000000000000008 [..] RIP: 0010:cxl_region_setup_targets+0x3e9/0xae0 [cxl_core] [..] Call Trace: <TASK> cxl_region_attach+0x46c/0x7a0 [cxl_core] cxl_create_region+0x20b/0x270 [cxl_core] cxl_mock_mem_probe+0x641/0x800 [cxl_mock_mem] platform_probe+0x5b/0xb0 Detect RCDs explicitly and skip walking the non-existent port hierarchy between root and endpoint in that case. While this has been a problem since: commit 0a19bfc8de93 ("cxl/port: Add RCD endpoint port enumeration") ...it becomes a more reliable crash scenario with the new autodiscovery implementation. Fixes: a32320b71f08 ("cxl/region: Add region autodiscovery") Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/168002858268.50647.728091521032131326.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-04-04cxl/port: Fix find_cxl_root() for RCDs and simplify itDan Williams
The find_cxl_root() helper is used to lookup root decoders and other CXL platform topology information for a given endpoint. It turns out that for RCDs it has never worked. The result of find_cxl_root(&cxlmd->dev) is always NULL for the RCH topology case because it expects to find a cxl_port at the host-bridge. RCH topologies only have the root cxl_port object with the host-bridge as a dport. While there are no reports of this being a problem to date, by inspection region enumeration should crash as a result of this problem, and it does in a local unit test for this scenario. However, an observation that ever since: commit f17b558d6663 ("cxl/pmem: Refactor nvdimm device registration, delete the workqueue") ...all callers of find_cxl_root() occur after the memdev connection to the port topology has been established. That means that find_cxl_root() can be simplified to a walk of the endpoint port topology to the root. Switch to that arrangement which also fixes the RCD bug. Fixes: a32320b71f08 ("cxl/region: Add region autodiscovery") Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/168002857715.50647.344876437247313909.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-04-04cxl/hdm: Skip emulation when driver manages mem_enableDan Williams
If the driver is allowed to enable memory operation itself then it can also turn on HDM decoder support at will. With this the second call to cxl_setup_hdm_decoder_from_dvsec(), when an HDM decoder is not committed, is not needed. Fixes: b777e9bec960 ("cxl/hdm: Emulate HDM decoder from DVSEC range registers") Link: http://lore.kernel.org/r/20230220113657.000042e1@huawei.com Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/167703068474.185722.664126485486344246.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-04-04cxl/hdm: Fix double allocation of @cxlhdmDan Williams
devm_cxl_setup_emulated_hdm() reallocates an instance of @cxlhdm that was already allocated at the start of devm_cxl_setup_hdm(). Only one is needed and devm_cxl_setup_emulated_hdm() does not do enough to warrant being an explicit helper. Fixes: 4474ce565ee4 ("cxl/hdm: Create emulated cxl_hdm for devices that do not have HDM decoders") Tested-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/167703067936.185722.7908921750127154779.stgit@dwillia2-xfh.jf.intel.com Link: https://lore.kernel.org/r/168012574357.221280.5001364964799725366.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-04-04blk-mq: directly poll requestsKeith Busch
Polling needs a bio with a valid bi_bdev, but neither of those are guaranteed for polled driver requests. Make request based polling directly use blk-mq's polling function instead. When executing a request from a polled hctx, we know the request's cookie, and that it's from a live blk-mq queue that supports polling, so we can safely skip everything that bio_poll provides. Cc: stable@kernel.org Reported-by: Martin Belanger <Martin.Belanger@dell.com> Reported-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Tested-by: Daniel Wagner <dwagner@suse.de> Revieded-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Link: https://lore.kernel.org/r/20230331180056.1155862-1-kbusch@meta.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-04-04Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
Pull kvm fixes from Paolo Bonzini: "PPC: - Hide KVM_CAP_IRQFD_RESAMPLE if XIVE is enabled s390: - Fix handling of external interrupts in protected guests x86: - Resample the pending state of IOAPIC interrupts when unmasking them - Fix usage of Hyper-V "enlightened TLB" on AMD - Small fixes to real mode exceptions - Suppress pending MMIO write exits if emulator detects exception Documentation: - Fix rST syntax" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: docs: kvm: x86: Fix broken field list KVM: PPC: Make KVM_CAP_IRQFD_RESAMPLE platform dependent KVM: s390: pv: fix external interruption loop not always detected KVM: nVMX: Do not report error code when synthesizing VM-Exit from Real Mode KVM: x86: Clear "has_error_code", not "error_code", for RM exception injection KVM: x86: Suppress pending MMIO write exits if emulator detects exception KVM: x86/ioapic: Resample the pending state of an IRQ when unmasking KVM: irqfd: Make resampler_list an RCU list KVM: SVM: Flush Hyper-V TLB when required
2023-04-04vdpa_sim_net: complete the initialization before register the deviceStefano Garzarella
Initialization must be completed before calling _vdpa_register_device() since it can connect the device to the vDPA bus, so requests can arrive after that call. So for example vdpasim_net_work(), which uses the net->*_stats variables, can be scheduled before they are initialized. Let's move _vdpa_register_device() to the end of vdpasim_net_dev_add() and add a comment to avoid future issues. Fixes: 0899774cb360 ("vdpa_sim_net: vendor satistics") Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Message-Id: <20230329160321.187176-1-sgarzare@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2023-04-04Merge tag 'nfsd-6.3-5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fixes from Chuck Lever: - Fix a crash and a resource leak in NFSv4 COMPOUND processing - Fix issues with AUTH_SYS credential handling - Try again to address an NFS/NFSD/SUNRPC build dependency regression * tag 'nfsd-6.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: NFSD: callback request does not use correct credential for AUTH_SYS NFS: Remove "select RPCSEC_GSS_KRB5 sunrpc: only free unix grouplist after RCU settles nfsd: call op_release, even when op_func returns an error NFSD: Avoid calling OPDESC() with ops->opnum == OP_ILLEGAL
2023-04-04docs: kvm: x86: Fix broken field listTakahiro Itazuri
Add a missing ":" to fix a broken field list. Signed-off-by: Takahiro Itazuri <itazur@amazon.com> Fixes: ba7bb663f554 ("KVM: x86: Provide per VM capability for disabling PMU virtualization") Message-Id: <20230331093116.99820-1-itazur@amazon.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-04-04asm-generic: avoid __generic_cmpxchg_local warningsArnd Bergmann
Code that passes a 32-bit constant into cmpxchg() produces a harmless sparse warning because of the truncation in the branch that is not taken: fs/erofs/zdata.c: note: in included file (through /home/arnd/arm-soc/arch/arm/include/asm/cmpxchg.h, /home/arnd/arm-soc/arch/arm/include/asm/atomic.h, /home/arnd/arm-soc/include/linux/atomic.h, ...): include/asm-generic/cmpxchg-local.h:29:33: warning: cast truncates bits from constant value (5f0ecafe becomes fe) include/asm-generic/cmpxchg-local.h:33:34: warning: cast truncates bits from constant value (5f0ecafe becomes cafe) include/asm-generic/cmpxchg-local.h:29:33: warning: cast truncates bits from constant value (5f0ecafe becomes fe) include/asm-generic/cmpxchg-local.h:30:42: warning: cast truncates bits from constant value (5f0edead becomes ad) include/asm-generic/cmpxchg-local.h:33:34: warning: cast truncates bits from constant value (5f0ecafe becomes cafe) include/asm-generic/cmpxchg-local.h:34:44: warning: cast truncates bits from constant value (5f0edead becomes dead) This was reported as a regression to Matt's recent __generic_cmpxchg_local patch, though this patch only added more warnings on top of the ones that were already there. Rewording the truncation to use an explicit bitmask instead of a cast to a smaller type avoids the warning but otherwise leaves the code unchanged. I had another look at why the cast is even needed for atomic_cmpxchg(), and as Matt describes the problem here is that atomic_t contains a signed 'int', but cmpxchg() takes an 'unsigned long' argument, and converting between the two leads to a 64-bit sign-extension of negative 32-bit atomics. I checked the other implementations of arch_cmpxchg() and did not find any others that run into the same problem as __generic_cmpxchg_local(), but it's easy to be on the safe side here and always convert the signed int into an unsigned int when calling arch_cmpxchg(), as this will work even when any of the arch_cmpxchg() implementations run into the same problem. Fixes: 624654152284 ("locking/atomic: cmpxchg: Make __generic_cmpxchg_local compare against zero-extended 'old' value") Reviewed-by: Matt Evans <mev@rivosinc.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-04asm-generic/io.h: suppress endianness warnings for relaxed accessorsVladimir Oltean
Copy the forced type casts from the normal MMIO accessors to suppress the sparse warnings that point out __raw_readl() returns a native endian word (just like readl()). Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-04asm-generic/io.h: suppress endianness warnings for readq() and writeq()Vladimir Oltean
Commit c1d55d50139b ("asm-generic/io.h: Fix sparse warnings on big-endian architectures") missed fixing the 64-bit accessors. Arnd explains in the attached link why the casts are necessary, even if __raw_readq() and __raw_writeq() do not take endian-specific types. Link: https://lore.kernel.org/lkml/9105d6fc-880b-4734-857d-e3d30b87ccf6@app.fastmail.com/ Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-04-04KVM: arm64: Advertise ID_AA64PFR0_EL1.CSV2/3 to protected VMsFuad Tabba
The existing pKVM code attempts to advertise CSV2/3 using values initialized to 0, but never set. To advertise CSV2/3 to protected guests, pass the CSV2/3 values to hyp when initializing hyp's view of guests' ID_AA64PFR0_EL1. Similar to non-protected KVM, these are system-wide, rather than per cpu, for simplicity. Fixes: 6c30bfb18d0b ("KVM: arm64: Add handlers for protected VM System Registers") Signed-off-by: Fuad Tabba <tabba@google.com> Link: https://lore.kernel.org/r/20230404152321.413064-1-tabba@google.com Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-04-04ice: Reset FDIR counter in FDIR init stageLingyu Liu
Reset the FDIR counters when FDIR inits. Without this patch, when VF initializes or resets, all the FDIR counters are not cleaned, which may cause unexpected behaviors for future FDIR rule create (e.g., rule conflict). Fixes: 1f7ea1cd6a37 ("ice: Enable FDIR Configure for AVF") Signed-off-by: Junfeng Guo <junfeng.guo@intel.com> Signed-off-by: Lingyu Liu <lingyu.liu@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-04-04ice: fix wrong fallback logic for FDIRSimei Su
When adding a FDIR filter, if ice_vc_fdir_set_irq_ctx returns failure, the inserted fdir entry will not be removed and if ice_vc_fdir_write_fltr returns failure, the fdir context info for irq handler will not be cleared which may lead to inconsistent or memory leak issue. This patch refines failure cases to resolve this issue. Fixes: 1f7ea1cd6a37 ("ice: Enable FDIR Configure for AVF") Signed-off-by: Simei Su <simei.su@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-04-04vdpa/mlx5: Add and remove debugfs in setup/teardown driverEli Cohen
The right place to add the debugfs create is in setup_driver() and remove it in teardown_driver(). Current code adds the debugfs when creating the device but resetting a device will remove the debugfs subtree and subsequent set_driver will not be able to create the files since the debugfs pointer is NULL. Fixes: 294221004322 ("vdpa/mlx5: Add debugfs subtree") Signed-off-by: Eli Cohen <elic@nvidia.com> v3 -> v4: Fix error flow in setup_driver() Message-Id: <20230403114039.11102-1-elic@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2023-04-04tools/virtio: fix typo in README instructionsRoss Zwisler
We need to have a unique chardev for each data path, else the chardevs will collide and qemu will die with this message: qemu-system-x86_64: -device virtserialport,bus=virtio-serial0.0,nr=2,chardev=charchannel0, id=channel1,name=trace-path-cpu0: Property 'virtserialport.chardev' can't take value 'charchannel0': Device 'charchannel0' is in use Signed-off-by: Ross Zwisler <zwisler@google.com> Message-Id: <20230215223350.2658616-7-zwisler@google.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-04-04vhost-scsi: Fix crash during LUN unmappingMike Christie
We normally clear the endpoint then unmap LUNs so the devices are fully shutdown when the LUN is unmapped, but it's legal to unmap before clearing. If the user does that while TMFs are running then we can end up crashing. vhost_scsi_port_unlink assumes that the LUN's tmf struct will always be on the tmf_queue list. However, if a TMF is running then it will have been removed while it's executing. If we do a LUN unmap at this time, then we assume the entry is on the list and just start accessing it and free it. This fixes the bug by just allocating the vhost_scsi_tmf struct when it's needed like is done with the se_tmr struct that's needed when we submit the TMF. In this path perf is not an issue and we can use GFP_KERNEL since it won't swing directly back on us, so we don't need to preallocate the struct. Signed-off-by: Mike Christie <michael.christie@oracle.com> Message-Id: <20230321020624.13323-3-michael.christie@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-04-04vhost-scsi: Fix vhost_scsi struct use after freeMike Christie
If vhost_scsi_setup_vq_cmds fails we leave the tpg->vhost_scsi pointer set. If the device is freed and then the user unmaps the LUN, the call to vhost_scsi_port_unlink -> vhost_scsi_hotunplug will see the that tpg->vhost_scsi is still set and try to use it. This has us clear the vhost_scsi pointer in the failure path. It also has us take tv_tpg_mutex in this failure path, because tv_tpg_vhost_count is accessed under this mutex in vhost_scsi_drop_nexus and in the future we will want to serialize access to tpg->vhost_scsi with that mutex instead of the vhost_scsi_mutex. Signed-off-by: Mike Christie <michael.christie@oracle.com> Message-Id: <20230321020624.13323-2-michael.christie@oracle.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-04-04virtio-blk: fix ZBD probe in kernels without ZBD supportDmitry Fomichev
When the kernel is built without support for zoned block devices, virtio-blk probe needs to error out any host-managed device scans to prevent such devices from appearing in the system as non-zoned. The current virtio-blk code simply bypasses all ZBD checks if CONFIG_BLK_DEV_ZONED is not defined and this leads to host-managed block devices being presented as non-zoned in the OS. This is one of the main problems this patch series is aimed to fix. In this patch, make VIRTIO_BLK_F_ZONED feature defined even when CONFIG_BLK_DEV_ZONED is not. This change makes the code compliant with the voted revision of virtio-blk ZBD spec. Modify the probe code to look at the situation when VIRTIO_BLK_F_ZONED is negotiated in a kernel that is built without ZBD support. In this case, the code checks the zoned model of the device and fails the probe is the device is host-managed. The patch also adds the comment to clarify that the call to perform the zoned device probe is correctly placed after virtio_device ready(). Fixes: 95bfec41bd3d ("virtio-blk: add support for zoned block devices") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Message-Id: <20230330214953.1088216-3-dmitry.fomichev@wdc.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-04-04virtio-blk: fix to match virtio specDmitry Fomichev
The merged patch series to support zoned block devices in virtio-blk is not the most up to date version. The merged patch can be found at https://lore.kernel.org/linux-block/20221016034127.330942-3-dmitry.fomichev@wdc.com/ but the latest and reviewed version is https://lore.kernel.org/linux-block/20221110053952.3378990-3-dmitry.fomichev@wdc.com/ The reason is apparently that the correct mailing lists and maintainers were not copied. The differences between the two are mostly cleanups, but there is one change that is very important in terms of compatibility with the approved virtio-zbd specification. Before it was approved, the OASIS virtio spec had a change in VIRTIO_BLK_T_ZONE_APPEND request layout that is not reflected in the current virtio-blk driver code. In the running code, the status is the first byte of the in-header that is followed by some pad bytes and the u64 that carries the sector at which the data has been written to the zone back to the driver, aka the append sector. This layout turned out to be problematic for implementing in QEMU and the request status byte has been eventually made the last byte of the in-header. The current code doesn't expect that and this causes the append sector value always come as zero to the block layer. This needs to be fixed ASAP. Fixes: 95bfec41bd3d ("virtio-blk: add support for zoned block devices") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Message-Id: <20230330214953.1088216-2-dmitry.fomichev@wdc.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-04-04NFSD: callback request does not use correct credential for AUTH_SYSDai Ngo
Currently callback request does not use the credential specified in CREATE_SESSION if the security flavor for the back channel is AUTH_SYS. Problem was discovered by pynfs 4.1 DELEG5 and DELEG7 test with error: DELEG5 st_delegation.testCBSecParms : FAILURE expected callback with uid, gid == 17, 19, got 0, 0 Signed-off-by: Dai Ngo <dai.ngo@oracle.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Fixes: 8276c902bbe9 ("SUNRPC: remove uid and gid from struct auth_cred") Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-04-04NFS: Remove "select RPCSEC_GSS_KRB5Chuck Lever
If CONFIG_CRYPTO=n (e.g. arm/shmobile_defconfig): WARNING: unmet direct dependencies detected for RPCSEC_GSS_KRB5 Depends on [n]: NETWORK_FILESYSTEMS [=y] && SUNRPC [=y] && CRYPTO [=n] Selected by [y]: - NFS_V4 [=y] && NETWORK_FILESYSTEMS [=y] && NFS_FS [=y] As NFSv4 can work without crypto enabled, remove the RPCSEC_GSS_KRB5 dependency altogether. Trond says: > It is possible to use the NFSv4.1 client with just AUTH_SYS, and > in fact there are plenty of people out there using only that. The > fact that RFC5661 gets its knickers in a twist about RPCSEC_GSS > support is largely irrelevant to those people. > > The other issue is that ’select’ enforces the strict dependency > that if the NFS client is compiled into the kernel, then the > RPCSEC_GSS and kerberos code needs to be compiled in as well: they > cannot exist as modules. Fixes: e57d06527738 ("NFS & NFSD: Update GSS dependencies") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Suggested-by: Trond Myklebust <trondmy@hammerspace.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-04-04sunrpc: only free unix grouplist after RCU settlesJeff Layton
While the unix_gid object is rcu-freed, the group_info list that it contains is not. Ensure that we only put the group list reference once we are really freeing the unix_gid object. Reported-by: Zhi Li <yieli@redhat.com> Link: https://bugzilla.redhat.com/show_bug.cgi?id=2183056 Signed-off-by: Jeff Layton <jlayton@kernel.org> Fixes: fd5d2f78261b ("SUNRPC: Make server side AUTH_UNIX use lockless lookups") Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2023-04-04net: stmmac: fix up RX flow hash indirection table when setting channelsCorinna Vinschen
stmmac_reinit_queues() fails to fix up the RX hash. Even if the number of channels gets restricted, the output of `ethtool -x' indicates that all RX queues are used: $ ethtool -l enp0s29f2 Channel parameters for enp0s29f2: Pre-set maximums: RX: 8 TX: 8 Other: n/a Combined: n/a Current hardware settings: RX: 8 TX: 8 Other: n/a Combined: n/a $ ethtool -x enp0s29f2 RX flow hash indirection table for enp0s29f2 with 8 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 0 1 2 3 4 5 6 7 [...] $ ethtool -L enp0s29f2 rx 3 $ ethtool -x enp0s29f2 RX flow hash indirection table for enp0s29f2 with 3 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 0 1 2 3 4 5 6 7 [...] Fix this by setting the indirection table according to the number of specified queues. The result is now as expected: $ ethtool -L enp0s29f2 rx 3 $ ethtool -x enp0s29f2 RX flow hash indirection table for enp0s29f2 with 3 RX ring(s): 0: 0 1 2 0 1 2 0 1 8: 2 0 1 2 0 1 2 0 [...] Tested on Intel Elkhart Lake. Fixes: 0366f7e06a6b ("net: stmmac: add ethtool support for get/set channels") Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Link: https://lore.kernel.org/r/20230403121120.489138-1-vinschen@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-04iommufd: Do not corrupt the pfn list when doing batch carryJason Gunthorpe
If batch->end is 0 then setting npfns[0] before computing the new value of pfns will fail to adjust the pfn and result in various page accounting corruptions. It should be ordered after. This seems to result in various kinds of page meta-data corruption related failures: WARNING: CPU: 1 PID: 527 at mm/gup.c:75 try_grab_folio+0x503/0x740 Modules linked in: CPU: 1 PID: 527 Comm: repro Not tainted 6.3.0-rc2-eeac8ede1755+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:try_grab_folio+0x503/0x740 Code: e3 01 48 89 de e8 6d c1 dd ff 48 85 db 0f 84 7c fe ff ff e8 4f bf dd ff 49 8d 47 ff 48 89 45 d0 e9 73 fe ff ff e8 3d bf dd ff <0f> 0b 31 db e9 d0 fc ff ff e8 2f bf dd ff 48 8b 5d c8 31 ff 48 89 RSP: 0018:ffffc90000f37908 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 00000000fffffc02 RCX: ffffffff81504c26 RDX: 0000000000000000 RSI: ffff88800d030000 RDI: 0000000000000002 RBP: ffffc90000f37948 R08: 000000000003ca24 R09: 0000000000000008 R10: 000000000003ca00 R11: 0000000000000023 R12: ffffea000035d540 R13: 0000000000000001 R14: 0000000000000000 R15: ffffea000035d540 FS: 00007fecbf659740(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200011c3 CR3: 000000000ef66006 CR4: 0000000000770ee0 PKRU: 55555554 Call Trace: <TASK> internal_get_user_pages_fast+0xd32/0x2200 pin_user_pages_fast+0x65/0x90 pfn_reader_user_pin+0x376/0x390 pfn_reader_next+0x14a/0x7b0 pfn_reader_first+0x140/0x1b0 iopt_area_fill_domain+0x74/0x210 iopt_table_add_domain+0x30e/0x6e0 iommufd_device_selftest_attach+0x7f/0x140 iommufd_test+0x10ff/0x16f0 iommufd_fops_ioctl+0x206/0x330 __x64_sys_ioctl+0x10e/0x160 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc Cc: <stable@vger.kernel.org> Fixes: f394576eb11d ("iommufd: PFN handling for iopt_pages") Link: https://lore.kernel.org/r/3-v1-ceab6a4d7d7a+94-iommufd_syz_jgg@nvidia.com Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reported-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-04-04iommufd: Fix unpinning of pages when an access is presentJason Gunthorpe
syzkaller found that the calculation of batch_last_index should use 'start_index' since at input to this function the batch is either empty or it has already been adjusted to cross any accesses so it will start at the point we are unmapping from. Getting this wrong causes the unmap to run over the end of the pages which corrupts pages that were never mapped. In most cases this triggers the num pinned debugging: WARNING: CPU: 0 PID: 557 at drivers/iommu/iommufd/pages.c:294 __iopt_area_unfill_domain+0x152/0x560 Modules linked in: CPU: 0 PID: 557 Comm: repro Not tainted 6.3.0-rc2-eeac8ede1755 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:__iopt_area_unfill_domain+0x152/0x560 Code: d2 0f ff 44 8b 64 24 54 48 8b 44 24 48 31 ff 44 89 e6 48 89 44 24 38 e8 fc d3 0f ff 45 85 e4 0f 85 eb 01 00 00 e8 0e d2 0f ff <0f> 0b e8 07 d2 0f ff 48 8b 44 24 38 89 5c 24 58 89 18 8b 44 24 54 RSP: 0018:ffffc9000108baf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 00000000ffffffff RCX: ffffffff821e3f85 RDX: 0000000000000000 RSI: ffff88800faf0000 RDI: 0000000000000002 RBP: ffffc9000108bd18 R08: 000000000003ca25 R09: 0000000000000014 R10: 000000000003ca00 R11: 0000000000000024 R12: 0000000000000004 R13: 0000000000000801 R14: 00000000000007ff R15: 0000000000000800 FS: 00007f3499ce1740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000243 CR3: 00000000179c2001 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> iopt_area_unfill_domain+0x32/0x40 iopt_table_remove_domain+0x23f/0x4c0 iommufd_device_selftest_detach+0x3a/0x90 iommufd_selftest_destroy+0x55/0x70 iommufd_object_destroy_user+0xce/0x130 iommufd_destroy+0xa2/0xc0 iommufd_fops_ioctl+0x206/0x330 __x64_sys_ioctl+0x10e/0x160 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc Also add some useful WARN_ON sanity checks. Cc: <stable@vger.kernel.org> Fixes: 8d160cd4d506 ("iommufd: Algorithms for PFN storage") Link: https://lore.kernel.org/r/2-v1-ceab6a4d7d7a+94-iommufd_syz_jgg@nvidia.com Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reported-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-04-04iommufd: Check for uptr overflowJason Gunthorpe
syzkaller found that setting up a map with a user VA that wraps past zero can trigger WARN_ONs, particularly from pin_user_pages weirdly returning 0 due to invalid arguments. Prevent creating a pages with a uptr and size that would math overflow. WARNING: CPU: 0 PID: 518 at drivers/iommu/iommufd/pages.c:793 pfn_reader_user_pin+0x2e6/0x390 Modules linked in: CPU: 0 PID: 518 Comm: repro Not tainted 6.3.0-rc2-eeac8ede1755+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:pfn_reader_user_pin+0x2e6/0x390 Code: b1 11 e9 25 fe ff ff e8 28 e4 0f ff 31 ff 48 89 de e8 2e e6 0f ff 48 85 db 74 0a e8 14 e4 0f ff e9 4d ff ff ff e8 0a e4 0f ff <0f> 0b bb f2 ff ff ff e9 3c ff ff ff e8 f9 e3 0f ff ba 01 00 00 00 RSP: 0018:ffffc90000f9fa30 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff821e2b72 RDX: 0000000000000000 RSI: ffff888014184680 RDI: 0000000000000002 RBP: ffffc90000f9fa78 R08: 00000000000000ff R09: 0000000079de6f4e R10: ffffc90000f9f790 R11: ffff888014185418 R12: ffffc90000f9fc60 R13: 0000000000000002 R14: ffff888007879800 R15: 0000000000000000 FS: 00007f4227555740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000043 CR3: 000000000e748005 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> pfn_reader_next+0x14a/0x7b0 ? interval_tree_double_span_iter_update+0x11a/0x140 pfn_reader_first+0x140/0x1b0 iopt_pages_rw_slow+0x71/0x280 ? __this_cpu_preempt_check+0x20/0x30 iopt_pages_rw_access+0x2b2/0x5b0 iommufd_access_rw+0x19f/0x2f0 iommufd_test+0xd11/0x16f0 ? write_comp_data+0x2f/0x90 iommufd_fops_ioctl+0x206/0x330 __x64_sys_ioctl+0x10e/0x160 ? __pfx_iommufd_fops_ioctl+0x10/0x10 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc Cc: <stable@vger.kernel.org> Fixes: 8d160cd4d506 ("iommufd: Algorithms for PFN storage") Link: https://lore.kernel.org/r/1-v1-ceab6a4d7d7a+94-iommufd_syz_jgg@nvidia.com Reviewed-by: Kevin Tian <kevin.tian@intel.com> Reported-by: Pengfei Xu <pengfei.xu@intel.com> Tested-by: Pengfei Xu <pengfei.xu@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2023-04-04powerpc/papr_scm: Update the NUMA distance table for the target nodeAneesh Kumar K.V
Platform device helper routines won't update the NUMA distance table while creating a platform device, even if the device is present on a NUMA node that doesn't have memory or CPU. This is especially true for pmem devices. If the target node of the pmem device is not online, we find the nearest online node to the device and associate the pmem device with that online node. To find the nearest online node, we should have the numa distance table updated correctly. Update the distance information during the device probe. For a papr scm device on NUMA node 3 distance_lookup_table value for distance_ref_points_depth = 2 before and after fix is below: Before fix: node 3 distance depth 0 - 0 node 3 distance depth 1 - 0 node 4 distance depth 0 - 4 node 4 distance depth 1 - 2 node 5 distance depth 0 - 5 node 5 distance depth 1 - 1 After fix node 3 distance depth 0 - 3 node 3 distance depth 1 - 1 node 4 distance depth 0 - 4 node 4 distance depth 1 - 2 node 5 distance depth 0 - 5 node 5 distance depth 1 - 1 Without the fix, the nearest numa node to the pmem device (NUMA node 3) will be picked as 4. After the fix, we get the correct numa node which is 5. Fixes: da1115fdbd6e ("powerpc/nvdimm: Pick nearby online node if the device node is not online") Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230404041433.1781804-1-aneesh.kumar@linux.ibm.com
2023-04-04net: ethernet: ti: am65-cpsw: Fix mdio cleanup in probeSiddharth Vadapalli
In the am65_cpsw_nuss_probe() function's cleanup path, the call to of_platform_device_destroy() for the common->mdio_dev device is invoked unconditionally. It is possible that either the MDIO node is not present in the device-tree, or the MDIO node is disabled in the device-tree. In both these cases, the MDIO device is not created, resulting in a NULL pointer dereference when the of_platform_device_destroy() function is invoked on the common->mdio_dev device on the cleanup path. Fix this by ensuring that the common->mdio_dev device exists, before attempting to invoke of_platform_device_destroy(). Fixes: a45cfcc69a25 ("net: ethernet: ti: am65-cpsw-nuss: use of_platform_device_create() for mdio") Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Link: https://lore.kernel.org/r/20230403090321.835877-1-s-vadapalli@ti.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-04-04um: Only disable SSE on clang to work around old GCC bugsDavid Gow
As part of the Rust support for UML, we disable SSE (and similar flags) to match the normal x86 builds. This both makes sense (we ideally want a similar configuration to x86), and works around a crash bug with SSE generation under Rust with LLVM. However, this breaks compiling stdlib.h under gcc < 11, as the x86_64 ABI requires floating-point return values be stored in an SSE register. gcc 11 fixes this by only doing register allocation when a function is actually used, and since we never use atof(), it shouldn't be a problem: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99652 Nevertheless, only disable SSE on clang setups, as that's a simple way of working around everyone's bugs. Fixes: 884981867947 ("rust: arch/um: Disable FP/SIMD instruction to match x86") Reported-by: Roberto Sassu <roberto.sassu@huaweicloud.com> Link: https://lore.kernel.org/linux-um/6df2ecef9011d85654a82acd607fdcbc93ad593c.camel@huaweicloud.com/ Tested-by: Roberto Sassu <roberto.sassu@huaweicloud.com> Tested-by: SeongJae Park <sj@kernel.org> Signed-off-by: David Gow <davidgow@google.com> Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com> Tested-by: Arthur Grillo <arthurgrillo@riseup.net> Signed-off-by: Richard Weinberger <richard@nod.at>
2023-04-03PCI/DOE: Fix memory leak with CONFIG_DEBUG_OBJECTS=yLukas Wunner
After a pci_doe_task completes, its work_struct needs to be destroyed to avoid a memory leak with CONFIG_DEBUG_OBJECTS=y. Fixes: 9d24322e887b ("PCI/DOE: Add DOE mailbox support functions") Tested-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: stable@vger.kernel.org # v6.0+ Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/775768b4912531c3b887d405fc51a50e465e1bf9.1678543498.git.lukas@wunner.de Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-04-03PCI/DOE: Silence WARN splat with CONFIG_DEBUG_OBJECTS=yLukas Wunner
Gregory Price reports a WARN splat with CONFIG_DEBUG_OBJECTS=y upon CXL probing because pci_doe_submit_task() invokes INIT_WORK() instead of INIT_WORK_ONSTACK() for a work_struct that was allocated on the stack. All callers of pci_doe_submit_task() allocate the work_struct on the stack, so replace INIT_WORK() with INIT_WORK_ONSTACK() as a backportable short-term fix. The long-term fix implemented by a subsequent commit is to move to a synchronous API which allocates the work_struct internally in the DOE library. Stacktrace for posterity: WARNING: CPU: 0 PID: 23 at lib/debugobjects.c:545 __debug_object_init.cold+0x18/0x183 CPU: 0 PID: 23 Comm: kworker/u2:1 Not tainted 6.1.0-0.rc1.20221019gitaae703b02f92.17.fc38.x86_64 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Call Trace: pci_doe_submit_task+0x5d/0xd0 pci_doe_discovery+0xb4/0x100 pcim_doe_create_mb+0x219/0x290 cxl_pci_probe+0x192/0x430 local_pci_probe+0x41/0x80 pci_device_probe+0xb3/0x220 really_probe+0xde/0x380 __driver_probe_device+0x78/0x170 driver_probe_device+0x1f/0x90 __driver_attach_async_helper+0x5c/0xe0 async_run_entry_fn+0x30/0x130 process_one_work+0x294/0x5b0 Fixes: 9d24322e887b ("PCI/DOE: Add DOE mailbox support functions") Link: https://lore.kernel.org/linux-cxl/Y1bOniJliOFszvIK@memverge.com/ Reported-by: Gregory Price <gregory.price@memverge.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Tested-by: Gregory Price <gregory.price@memverge.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Gregory Price <gregory.price@memverge.com> Cc: stable@vger.kernel.org # v6.0+ Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Link: https://lore.kernel.org/r/67a9117f463ecdb38a2dbca6a20391ce2f1e7a06.1678543498.git.lukas@wunner.de Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-04-03cxl/pci: Handle excessive CDAT lengthLukas Wunner
If the length in the CDAT header is larger than the concatenation of the header and all table entries, then the CDAT exposed to user space contains trailing null bytes. Not every consumer may be able to handle that. Per Postel's robustness principle, "be liberal in what you accept" and silently reduce the cached length to avoid exposing those null bytes. Fixes: c97006046c79 ("cxl/port: Read CDAT table") Tested-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: stable@vger.kernel.org # v6.0+ Link: https://lore.kernel.org/r/6d98b3c7da5343172bd3ccabfabbc1f31c079d74.1678543498.git.lukas@wunner.de Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-04-03cxl/pci: Handle truncated CDAT entriesLukas Wunner
If truncated CDAT entries are received from a device, the concatenation of those entries constitutes a corrupt CDAT, yet is happily exposed to user space. Avoid by verifying response lengths and erroring out if truncation is detected. The last CDAT entry may still be truncated despite the checks introduced herein if the length in the CDAT header is too small. However, that is easily detectable by user space because it reaches EOF prematurely. A subsequent commit which rightsizes the CDAT response allocation closes that remaining loophole. The two lines introduced here which exceed 80 chars are shortened to less than 80 chars by a subsequent commit which migrates to a synchronous DOE API and replaces "t.task.rv" by "rc". The existing acpi_cdat_header and acpi_table_cdat struct definitions provided by ACPICA cannot be used because they do not employ __le16 or __le32 types. I believe that cannot be changed because those types are Linux-specific and ACPI is specified for little endian platforms only, hence doesn't care about endianness. So duplicate the structs. Fixes: c97006046c79 ("cxl/port: Read CDAT table") Tested-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: stable@vger.kernel.org # v6.0+ Link: https://lore.kernel.org/r/bce3aebc0e8e18a1173425a7a865b232c3912963.1678543498.git.lukas@wunner.de Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-04-03cxl/pci: Handle truncated CDAT headerLukas Wunner
cxl_cdat_get_length() only checks whether the DOE response size is sufficient for the Table Access response header (1 dword), but not the succeeding CDAT header (1 dword length plus other fields). It thus returns whatever uninitialized memory happens to be on the stack if a truncated DOE response with only 1 dword was received. Fix it. Fixes: c97006046c79 ("cxl/port: Read CDAT table") Reported-by: Ming Li <ming4.li@intel.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Ming Li <ming4.li@intel.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: stable@vger.kernel.org # v6.0+ Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Link: https://lore.kernel.org/r/000e69cd163461c8b1bc2cf4155b6e25402c29c7.1678543498.git.lukas@wunner.de Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2023-04-03Merge tag 'vfs.misc.fixes.v6.3-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping Pull vfs fix from Christian Brauner: "When a mount or mount tree is made shared the vfs allocates new peer group ids for all mounts that have no peer group id set. Only mounts that aren't marked with MNT_SHARED are relevant here as MNT_SHARED indicates that the mount has fully transitioned to a shared mount. The peer group id handling is done with namespace lock held. On failure, the peer group id settings of mounts for which a new peer group id was allocated need to be reverted and the allocated peer group id freed. The cleanup_group_ids() helper can identify the mounts to cleanup by checking whether a given mount has a peer group id set but isn't marked MNT_SHARED. The deallocation always needs to happen with namespace lock held to protect against concurrent modifications of the propagation settings. This fixes the one place where the namespace lock was dropped before calling cleanup_group_ids()" * tag 'vfs.misc.fixes.v6.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping: fs: drop peer group ids under namespace lock
2023-04-03Merge tag 'hyperv-fixes-signed-20230402' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: - Fix a bug in channel allocation for VMbus (Mohammed Gamal) - Do not allow root partition functionality in CVM (Michael Kelley) * tag 'hyperv-fixes-signed-20230402' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/hyperv: Block root partition functionality in a Confidential VM Drivers: vmbus: Check for channel allocation before looking up relids
2023-04-03mtd: rawnand: meson: fix bitmask for length in command wordArseniy Krasnov
Valid mask is 0x3FFF, without this patch the following problems were found: 1) [ 0.938914] Could not find a valid ONFI parameter page, trying bit-wise majority to recover it [ 0.947384] ONFI parameter recovery failed, aborting 2) Read with disabled ECC mode was broken. Fixes: 8fae856c5350 ("mtd: rawnand: meson: add support for Amlogic NAND flash controller") Cc: <Stable@vger.kernel.org> Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/3794ffbf-dfea-e96f-1f97-fe235b005e19@sberdevices.ru
2023-04-03mtdblock: tolerate corrected bit-flipsBang Li
mtd_read() may return -EUCLEAN in case of corrected bit-flips.This particular condition should not be treated like an error. Signed-off-by: Bang Li <libang.linuxer@gmail.com> Fixes: e47f68587b82 ("mtd: check for max_bitflips in mtd_read_oob()") Cc: <stable@vger.kernel.org> # v3.7 Acked-by: Richard Weinberger <richard@nod.at> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230328163012.4264-1-libang.linuxer@gmail.com
2023-04-03mtd: rawnand: stm32_fmc2: use timings.mode instead of checking tRC_minChristophe Kerello
Use timings.mode value instead of checking tRC_min timing for EDO mode support. Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com> Fixes: 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver") Cc: stable@vger.kernel.org #v5.10+ Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230328155819.225521-3-christophe.kerello@foss.st.com
2023-04-03mtd: rawnand: stm32_fmc2: remove unsupported EDO modeChristophe Kerello
Remove the EDO mode support from as the FMC2 controller does not support the feature. Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com> Fixes: 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver") Cc: stable@vger.kernel.org #v5.4+ Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230328155819.225521-2-christophe.kerello@foss.st.com
2023-04-03tracing: Error if a trace event has an array for a __field()Steven Rostedt (Google)
A __field() in the TRACE_EVENT() macro is used to set up the fields of the trace event data. It is for single storage units (word, char, int, pointer, etc) and not for complex structures or arrays. Unfortunately, there's nothing preventing the build from accepting: __field(int, arr[5]); from building. It will turn into a array value. This use to work fine, as the offset and size use to be determined by the macro using the field name, but things have changed and the offset and size are now determined by the type. So the above would only be size 4, and the next field will be located 4 bytes from it (instead of 20). The proper way to declare static arrays is to use the __array() macro. Instead of __field(int, arr[5]) it should be __array(int, arr, 5). Add some macro tricks to the building of a trace event from the TRACE_EVENT() macro such that __field(int, arr[5]) will fail to build. A comment by the failure will explain why the build failed. Link: https://lore.kernel.org/lkml/20230306122549.236561-1-douglas.raillard@arm.com/ Link: https://lore.kernel.org/linux-trace-kernel/20230309221302.642e82d9@gandalf.local.home Reported-by: Douglas RAILLARD <douglas.raillard@arm.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-01 21:15:10 +0000