summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-06-11drm/i915/skl: Add warn about unsupported CDCLK ratesImre Deak
While checking workarounds related to the CDCLK PLL, I noticed that the DMC firmware bits for WA#1183 are missing for SKL. After that I clarified with HW people that it's not needed on SKL, since it doesn't support eDP1.4 which would be the only thing requiring the problematic CDCLK clock rates. So in theory we shouldn't ever choose these frequencies, but add an assert in any case for catching such cases and for documentation. v2: - Move the check to skl_set_cdclk and warn whenever using the corresponding VCO freq. (Ville) v3: - Actually check for the platform. (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180608144137.7943-1-imre.deak@intel.com
2018-06-11drm/i915/perf: fix gen11 engine class shiftMichel Thierry
Use the correct engine class shift value while storing the ctx hw id. Fixes the copy+paste error from commit 61d5676b5561 ("drm/i915/perf: fix ctx_id read with GuC & ICL"). Apologies for not spotting this in the original review, the specific_ctx_id_mask is correct, only the specific_ctx_id had this problem. v2: Just use the upper 32 bits of lrc_desc (Chris) v3: If we use the lrc_desc, we must apply the ctx_id_mask too (Lionel) Fixes: 61d5676b5561 ("drm/i915/perf: fix ctx_id read with GuC & ICL") Signed-off-by: Michel Thierry <michel.thierry@intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: intel-gfx@lists.freedesktop.org Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180604233250.609-2-michel.thierry@intel.com
2018-06-11drm/i915/perf: use the lrc_desc to get the ctx hw id in gen8-10Michel Thierry
The upper 32 bits of the lrc_desc (bits 52-32 to be precise) are the context hw id in GEN8-10, so use them and have one less thing to maintain in the unlikely case we change the descriptor sw fields. v2: If we use the lrc_desc, we must apply the ctx_id_mask too (Lionel) Signed-off-by: Michel Thierry <michel.thierry@intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180604233250.609-1-michel.thierry@intel.com
2018-06-11drm/i915: Apply batch location restrictions before pinningChris Wilson
We special case the position of the batch within the GTT to prevent negative self-relocation deltas from underflowing. However, that restriction is being applied after a trial pin of the batch in its current position. Thus we are not rejecting an invalid location if the batch has been used before, leading to an assertion if we happen to need to rearrange the entire payload. In the worst case, this may cause a GPU hang on gen7 or perhaps missing state. References: https://bugs.freedesktop.org/show_bug.cgi?id=105720 Fixes: 2889caa92321 ("drm/i915: Eliminate lots of iterations over the execobjects array") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Martin Peres <martin.peres@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180610194325.13467-2-chris@chris-wilson.co.uk Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-06-11drm/i915: Refactor unsettting obj->mm.pagesChris Wilson
As i915_gem_object_phys_attach() wants to play dirty and mess around with obj->mm.pages itself (replacing the shmemfs with a DMA allocation), refactor the gubbins so into i915_gem_object_unset_pages() that we don't have to duplicate all the secrets. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180611075532.26534-1-chris@chris-wilson.co.uk Link: https://patchwork.freedesktop.org/patch/msgid/152871104647.1718.8796913290418060204@jlahtine-desk.ger.corp.intel.com
2018-06-11drm/i915: Squash GEM load failure message (again)Chris Wilson
Due to a silent conflict (silent because we are trying to fix the CI test that is meant to exercising these failures!) between commit 51e645b6652c ("drm/i915: Mark the GPU as wedged without error on fault injection") and commit 8571a05a9dd0 ("drm/i915: Use GEM suspend when aborting initialisation"), we failed to actually squash the error message after injecting the load failure. Rearrange the code to export i915_load_failure() for better logging of real errors (and quiet logging of injected errors). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180609111058.2660-1-chris@chris-wilson.co.uk
2018-06-11drm/i915: fix PCH_NOP setting for non-PCH platformsJani Nikula
Setting PCH type to PCH_NOP before checking whether we actually have a PCH ends up returning true for HAS_PCH_SPLIT() on all non-PCH split platforms. Fix this by using PCH_NOP only for platforms that actually have a PCH. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180608123330.31003-6-jani.nikula@intel.com
2018-06-11drm/i915: be more strict about HAS_PCH_NOP() usageJani Nikula
HAS_PCH_NOP() implies a PCH platform without south display, not generic disabled display. Prefer num_pipes == 0 for PCH independent checks. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180608123330.31003-5-jani.nikula@intel.com
2018-06-11drm/i915: clean up virtual PCH special case handlingJani Nikula
Use intel_pch_type() also for mapping the no PCH case (PCH id 0) to PCH_NONE to simplify code. Also make sure that intel_pch_type() knows all the PCH ids returned by intel_virt_detect_pch(). Loudly fail if this isn't the case; this shouldn't happen anyway. Cc: Colin Xu <Colin.Xu@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Colin Xu <Colin.Xu@intel.com> Reviewed-by: Colin Xu <Colin.Xu@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180608123330.31003-4-jani.nikula@intel.com
2018-06-11drm/i915: document PCH_NOPLucas De Marchi
There's a difference between PCH_NONE and PCH_NOP: the former means we don't have a PCH while in the latter we do, but it doesn't have the south display. Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180608123330.31003-3-jani.nikula@intel.com
2018-06-11drm/i915: fix guest virtual PCH detection on non-PCH systemsJani Nikula
Virtualized non-PCH systems such as Broxton or Geminilake should use PCH_NONE to indicate no PCH rather than PCH_NOP. The latter is a specific case to indicate a PCH system without south display. Reported-by: Colin Xu <Colin.Xu@intel.com> Cc: Colin Xu <Colin.Xu@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Colin Xu <Colin.Xu@intel.com> Reviewed-by: Colin Xu <Colin.Xu@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180608123330.31003-2-jani.nikula@intel.com
2018-06-11drm/i915/gvt: use array to avoid potential buffer overflowXinyun Liu
Array 'pdp_pair' of size 1 may use index value(s) 1..7. Changed to pdps[8] to avoid confusion. Signed-off-by: Xinyun Liu <xinyun.liu@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-06-11drm/i915/gvt: removed unnecessary boundary checkXinyun Liu
type is already checked in the function entry. So it is unnecessary to check it again. Signed-off-by: Xinyun Liu <xinyun.liu@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-06-11drm/i915/gvt: Avoid dereference a potential null pointerXinyun Liu
Add sanity check for up_irq_info. Signed-off-by: Xinyun Liu <xinyun.liu@intel.com> Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-06-09drm/i915/gtt: Reorder aliasing_ppgtt finiChris Wilson
To allow ourselves to use a first class vma for the aliasing_ppgtt page directory, we have to reorder the shutdown on module unload to remove and unpin the aliasing_ppgtt before complaining about any objects left in the GGTT. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180609090151.22007-1-chris@chris-wilson.co.uk
2018-06-08drm/i915/gtt: Remove vgpu check for gen6Chris Wilson
Since vgpu is not supported on Haswell or any other gen6/7, we do not need to check and act upon it's enablement. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180608150435.15010-2-chris@chris-wilson.co.uk
2018-06-08drm/i915/gtt: Remove redundant hsw_mm_switch()Chris Wilson
hsw_mm_switch() and gen7_mm_switch() are identical, so let's remove the redundant specialism. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180608150435.15010-1-chris@chris-wilson.co.uk
2018-06-08drm/i915/gtt: Fix unwind length passed to gen6_ppgtt_clear_rangeChris Wilson
When we want to unwind an error when allocating the PD for gen6, we call gen6_ppgtt_clear_range() telling to clear upto the PD we've previously allocated. However, we passed it an incorrect length, passing it the endpoint instead. Fortunately, as the start was always 0, this has no impact today, but tomorrow we want to start using non-zero origins. Reported-by: Matthew Auld <matthew.william.auld@gmail.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180608173221.10455-1-chris@chris-wilson.co.uk
2018-06-08drm/i915: Fix sprite destination colorkeying on SKL+Ville Syrjälä
On SKL+ the dst colorkey must be configured on the lower plane that contains the colorkey. This is in contrast to most earlier platforms where the dst colorkey is configured on the plane above. The hardware will peform dst keying only between two immediately adjacent (in zorder) planes. Plane 2 will be keyed against plane 1, plane 3 againts plane 2, and so on. There is no way to key arbitrary planes against plane 1. Thus offering dst color keying on plane 3+ is pointless. In fact it can be harmful since enabling dst keying on more than one plane on the same pipe leads to only the top-most of the planes performing the keying. For any plane lower in zorder the dst key enable is simply ignored. v2: s/plane 0/plane 1/ etc. since the hw plane names start from 1 Don't break dst colorkey on pre-SKL sprites (hunk ended in the wrong patch) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180529182804.8571-1-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> #v1
2018-06-08drm/i915: Mark the GPU as wedged without error on fault injectionChris Wilson
If we have been instructed (by CI) to inject a fault to load the module with a wedged GPU, do so quietly less we upset CI. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180607134558.31150-1-chris@chris-wilson.co.uk
2018-06-08drm/i915: Add WaKBLVECSSemaphoreWaitPollMika Kuoppala
There is a problem with kbl up to rev E0 where a heavy memory/fabric traffic from adjacent engine(s) can cause an engine reset to fail. This traffic can be from normal memory accesses or it can be from heavy polling on a semaphore wait. For engine hogging causing a fail, we already fallback to full reset. Which effectively stops all engines and thus we only add a workaround documentation. For the semaphore wait loop poll case, we add one microsecond poll interval to semaphore wait to guarantee bandwidth for the reset preration. The side effect is that we make semaphore completion latencies also 1us longer. v2: Let full reset handle the adjacent engine idling (Chris) v3: Skip render engine (Joonas), please checkpatch on define (Mika) References: https://bugs.freedesktop.org/show_bug.cgi?id=106684 References: VTHSD#2227190, HSDES#1604216706, BSID#0917 Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180607172444.17080-1-mika.kuoppala@linux.intel.com
2018-06-08drm/i915: Cancel reset preparations on failed resetsMika Kuoppala
Our reset handling has a retry layer further up in the chain. As we have told the engine to prepare for reset, and failed it, make sure to remove that preparation so that the next attempted reset has a clean slate by triggering another full prepare cycle for the engines. v2: ret as int, simplified cleanup (Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180605160357.32591-1-mika.kuoppala@linux.intel.com
2018-06-07drm/i915/gtt: Push allocation to hw ppgtt constructorChris Wilson
In the next patch, we will subclass the gen6 hw_ppgtt. In order, for the two different generations of hw ppgtt stucts to be of different size, push the allocation down to the constructor. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180607163040.9781-1-chris@chris-wilson.co.uk
2018-06-07drm/i915: Decouple vma vfuncs from vmChris Wilson
To allow for future non-object backed vma, we need to be able to specialise the callbacks for binding, et al, the vma. For example, instead of calling vma->vm->bind_vma(), we now call vma->ops->bind_vma(). This gives us the opportunity to later override the operation for a custom vma. v2: flip order of unbind/bind Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180607154047.9171-2-chris@chris-wilson.co.uk
2018-06-07drm/i915: Prepare for non-object vmaChris Wilson
In order to allow ourselves to use VMA to wrap other entities other than GEM objects, we need to allow for the vma->obj backpointer to be NULL. In most cases, we know we are operating on a GEM object and its vma, but we need the core code (such as i915_vma_pin/insert/bind/unbind) to work regardless of the innards. The remaining eyesore here is vma->obj->cache_level and related (but less of an issue) vma->obj->gt_ro. With a bit of care we should mirror those on the vma itself. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180607154047.9171-1-chris@chris-wilson.co.uk
2018-06-07drm/i915: Change i915_gem_fault() to return vm_fault_tChris Wilson
In preparation for vm_fault_t becoming a distinct type, convert the fault handler (i915_gem_fault()) over to the new interface. Based on a patch by Souptick Joarder References: 1c8f422059ae ("mm: change return type to vm_fault_t") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Souptick Joarder <jrdr.linux@gmail.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180606214520.20220-1-chris@chris-wilson.co.uk
2018-06-07drm/i915: Use GEM suspend when aborting initialisationChris Wilson
As part of our GEM initialisation now, we send a request to the hardware in order to record the initial GPU state. This coupled with deferred idle workers, makes aborting on error tricky. We already have the mechanism in place to wait on the GPU and cancel all the deferred workers for suspend, so let's reuse it during the error teardown. It is already used in places for later init error handling, but doing so at this point is slightly ugly due to the mutex dance (it's ok, the module load is still single threaded). Testcase: igt/drv_module_reload/basic-reload-inject Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180606145441.4460-1-chris@chris-wilson.co.uk
2018-06-07Merge tag 'drm-intel-next-2018-06-06' into gvt-nextZhenyu Wang
Backmerge for recent request->hw_context change and new vGPU huge page capability definition. Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
2018-06-06drm/i915: Update DRIVER_DATE to 20180606Rodrigo Vivi
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-06-06drm/i915/gtt: Fix typo in fill_px() macroChris Wilson
The macro declared the ppgtt parameter but implicitly used the local vm instead. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180606205128.25952-1-chris@chris-wilson.co.uk
2018-06-06drm/i915: Mark i915.inject_load_failure as being hitChris Wilson
When we reach the magic value and do inject a fault into our module load, mark the module option as being hit. Since we fail from inside pci probe, the module load isn't actually aborted and the module (and parameters) are left lingering. igt can then inspect the parameter on its synchronous completion of modprobe to see if the fault injection was successful, and will keeping on injecting new faults until the module succeeds in loading having surpassed the number of fault points. v2: Reset to 0 after being hit; Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Imre Deak <imre.deak@intel.com> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180606144153.4244-1-chris@chris-wilson.co.uk
2018-06-05drm/i915/gtt: Rename i915_hw_ppgtt base memberChris Wilson
In the near future, I want to subclass gen6_hw_ppgtt as it contains a few specialised members and I wish to add more. To avoid the ugliness of using ppgtt->base.base, rename the i915_hw_ppgtt base member (i915_address_space) as vm, which is our common shorthand for an i915_address_space local. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180605153758.18422-1-chris@chris-wilson.co.uk
2018-06-05drm/i915/error: Fixup inactive/active countingChris Wilson
The inactive counter was over the active list, and vice versa. Fortuitously this should not cause a problem in practice as they shared the same array and clamped the number of entries they would write. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180605160623.30163-1-chris@chris-wilson.co.uk
2018-06-05drm/i915/guc: Don't leak stage descriptor pool on init failureMichal Wajdeczko
In case of failure during GuC clients creation, we forget to cleanup earlier pool allocation. Use proper teardown to fix that. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michal Winiarski <michal.winiarski@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180605120547.16468-1-michal.wajdeczko@intel.com
2018-06-05drm/i915/pmu: Do not assume fixed hrtimer periodTvrtko Ursulin
As Chris has discovered on his Ivybridge, and later automated test runs have confirmed, on most of our platforms hrtimer faced with heavy GPU load can occasionally become sufficiently imprecise to affect PMU sampling calculations. This means we cannot assume sampling frequency is what we asked for, but we need to measure the interval ourselves. This patch is similar to Chris' original proposal for per-engine counters, but instead of introducing a new set to work around the problem with frequency sampling, it swaps around the way internal frequency accounting is done. Instead of accumulating current frequency and dividing by sampling frequency on readout, it accumulates frequency scaled by each period. v2: * Typo in commit message, comment on period calculation and USEC_PER_SEC. (Chris Wilson) Testcase: igt/perf_pmu/*busy* # snb, ivb, hsw Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180605140253.3541-1-tvrtko.ursulin@linux.intel.com
2018-06-05drm/i915/trace: Context field needs to be 64-bit wideTvrtko Ursulin
Underlaying field is u64 so the tracepoint needs to be as well. v2: * Re-order binary packet for 64-bit alignment. (Chris Wilson) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180605134124.25672-1-tvrtko.ursulin@linux.intel.com
2018-06-05drm/i915/trace: Remove engine out of the context sandwichTvrtko Ursulin
In the string tracepoint representation we ended up with the engine sandwiched between context hardware id and context fence id. Move the two pieces of context data together for redability. Binary records are left as is, that is both fields remaing under the existing name and ordering. v2: * Do not consolidate the printk format, just reorder. (Lionel) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180525082642.18246-2-tvrtko.ursulin@linux.intel.com
2018-06-05drm/i915/trace: Describe engines as class:instance pairsTvrtko Ursulin
Instead of using the engine->id, use uabi_class:instance pairs in trace- points including engine info. This will be more readable, more future proof and more stable for userspace consumption. v2: * Use u16 for class and instance. (Chris Wilson) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: svetlana.kukanova@intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180525082642.18246-1-tvrtko.ursulin@linux.intel.com
2018-06-05drm/i915: Swap magics and use SZ_1MChris Wilson
Since the kernel provides SZ_1M, use it in preference of 1 << 20. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180605135746.8020-1-chris@chris-wilson.co.uk
2018-06-05drm/i915: Correctly handle error path in i915_gem_init_hwMichal Wajdeczko
In function gem_init_hw() we are calling uc_init_hw() but in case of error later in function, we missed to call matching uc_fini_hw() v2: pulled out from the series Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180605122443.23776-1-michal.wajdeczko@intel.com
2018-06-05drm/i915/vma: Move the bind_count vs pin_count assertion to a helperChris Wilson
To spare ourselves a long line later, refactor the repeated check of bind_count vs pin_count to a helper. v2: Fix up the commentary! Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180605094107.31367-1-chris@chris-wilson.co.uk
2018-06-05drm/i915/gtt: Teach restore-gtt to walk the ggtt vma list not the object listChris Wilson
In preparation, for having non-vma objects stored inside the ggtt, to handle restoration of the GGTT following resume, we need to walk over the ggtt address space rebinding vma, as opposed to walking over bound objects looking for ggtt entries. v2: Skip objects only bound for the aliasing_ppgtt Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> #v1 Link: https://patchwork.freedesktop.org/patch/msgid/20180605082856.19221-1-chris@chris-wilson.co.uk
2018-06-05drm/i915/ringbuffer: Make context pin/unpin symmetricChris Wilson
Currently, we have a special routine for pinning the context state at the start of activity tracking, but lack the complementary unpin routine. Create it to to ease later patches that want to do partial teardown on error, and, not least, to improve the readability of the code. Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180605085348.3018-1-chris@chris-wilson.co.uk
2018-06-05drm/i915: Add new vGPU cap info bit VGT_CAPS_HUGE_GTTChangbin Du
This adds a new vGPU cap info bit VGT_CAPS_HUGE_GTT, which is to detect whether the host supports shadowing of huge gtt pages. If host does support it, remove the page sizes restriction for vGPU. Signed-off-by: Changbin Du <changbin.du@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1525770425-5373-1-git-send-email-changbin.du@intel.com
2018-06-04drm/i915/icl: Don't update enabled dbuf slices struct until updated in hwMahesh Kumar
Do not update number of enabled dbuf slices in dev_priv struct until we actually enable/disable dbuf slice in hw. This is leading to never updating dbuf slices and resulting in DBuf slice mismatch warning. Fixes: aa9664ffe863 ("drm/i915/icl: Enable 2nd DBuf slice only when needed") Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180517132626.5885-1-mahesh1.kumar@intel.com
2018-06-04drm/i915/perf: fix ctx_id read with GuC & ICLLionel Landwerlin
One thing we didn't really understand about the OA report is that the ContextID field (dword 2) is copy of the context descriptor (dword 1). On Gen8->10 and without using GuC we didn't notice the issue because we only checked the 21bits of the ContextID field in the OA reports which matches exactly the hw_id stored into the context descriptor. When using GuC submission we have an issue of a non matching hw_id because GuC uses bit 20 of the hw_id to signal proxy submission. This change introduces a mask to compare only the relevant bits. On ICL the context descriptor format has changed and we failed to address this. On top of using a mask we also need to shift the bits properly. v2: Reuse lrc_desc rather than recomputing part of it (Chris/Michel) v3: Always pin the context we're filtering with (Chris) Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Fixes: 1de401c08fa805 ("drm/i915/perf: enable perf support on ICL") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104252 BSpec: 1237 Testcase: igt/perf/gen8-unprivileged-single-ctx-counters Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Michel Thierry <michel.thierry@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180602112946.30803-3-lionel.g.landwerlin@intel.com Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: intel-gfx@lists.freedesktop.org
2018-06-04drm/i915: drop one bit on the hw_id when using gucLionel Landwerlin
We currently using GuC as a proxy to the hardware. When Guc is used in such mode, it consumes the bit 20 of the hw_id to indicate that the workload was submitted by proxy. So far we probably haven't seen the issue because we need to allocate 1048576+ contexts to hit this issue. Still, we should avoid allocating the hw_id on that bit and restriction to bits [0:19] (i.e 20bits instead of 21). v2: Leave the max hw_id computation in i915_gem_context.c (Michel) v3: Be consistent on if/else usage (Chris) Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> BSpec: 1237 Reviewed-by: Michel Thierry <michel.thierry@intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180602112946.30803-2-lionel.g.landwerlin@intel.com
2018-06-04drm/i915/gtt: Remove obsolete switch_mm hooks for gen8+Chris Wilson
As the ppgtt for execlists is tightly coupled to the executing context, and not switch separately, we no longer use the ppgtt->switch_mm hooks on gen8+. Remove them. References: 79e6770cb1f5 ("drm/i915: Remove obsolete ringbuffer emission for gen8+") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Matthew Auld <matthew.william.auld@gmail.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180604131552.29370-1-chris@chris-wilson.co.uk
2018-06-04drm/i915: Move i915_gem_fini to i915_gem.cMichal Wajdeczko
We should keep i915_gem_init/fini functions together for easier tracking of their symmetry. v2: rebased, pulled out from the series Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180604090032.20840-1-michal.wajdeczko@intel.com
2018-06-01drm/i915/icl: Calculate link clock using the new registersArkadiusz Hiler
Start using the new registers for ICL and on. Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180522002558.29262-13-paulo.r.zanoni@intel.com
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 13:35:37 +0000