summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-01-20MIPS: ralink: add MT7621 supportJohn Crispin
MT7621 is based on a 1004k core. This patch adds support for the SoC. The timer and IRQ is just boiler plate as GIC has recently been moved to generic places in the kernel and just works. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11990/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-20MIPS: ralink: add a symbol for INTCJohn Crispin
Some of the newer SoCs use the GIC. This patch splits the INTC out into its own symbol, allowing us to add the gic code in the following patch. Signed-off-by: John Crispin <blogic@openwrt.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11989/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-20Documentation: DT: net: add docs for ralink/mediatek SoC ethernet bindingJohn Crispin
Add three files. ralink,rt2880-net.txt descibes the actual frame engine and the other two describe the switch forntend bindings. Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Michael Lee <igvtee@gmail.com> Cc: devicetree@vger.kernel.org Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-mediatek@lists.infradead.org Cc: John Crispin <blogic@openwrt.org> Cc: Felix Fietkau <nbd@nbd.name> Cc: Michael Lee <igvtee@gmail.com> Cc: steven.liu@mediatek.com Cc: Fred.Chang@mediatek.com Patchwork: https://patchwork.linux-mips.org/patch/11970/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-20MIPS: BCM47xx: Support SPROM prefixes on other platformsRafał Miłecki
BCM47XX platform has specific PCI setup because all buses share the same domain. It's different e.g. on ARM ARCH_BCM_5301X where each PCI bus gets its own domain (they are handled by iProc PCIe controller driver). As we want to make SPROM driver more generic, let's add an exception for BCM47xx. It was tested on BCM4706 (MIPS) and BCM4708A0 (ARM). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11969/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-19Merge branch 'for-4.5/core' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull core block updates from Jens Axboe: "We don't have a lot of core changes this time around, it's mostly in drivers, which will come in a subsequent pull. The cores changes include: - blk-mq - Prep patch from Christoph, changing blk_mq_alloc_request() to take flags instead of just using gfp_t for sleep/nosleep. - Doc patch from me, clarifying the difference between legacy and blk-mq for timer usage. - Fixes from Raghavendra for memory-less numa nodes, and a reuse of CPU masks. - Cleanup from Geliang Tang, using offset_in_page() instead of open coding it. - From Ilya, rename request_queue slab to it reflects what it holds, and a fix for proper use of bdgrab/put. - A real fix for the split across stripe boundaries from Keith. We yanked a broken version of this from 4.4-rc final, this one works. - From Mike Krinkin, emit a trace message when we split. - From Wei Tang, two small cleanups, not explicitly clearing memory that is already cleared" * 'for-4.5/core' of git://git.kernel.dk/linux-block: block: use bd{grab,put}() instead of open-coding block: split bios to max possible length block: add call to split trace point blk-mq: Avoid memoryless numa node encoded in hctx numa_node blk-mq: Reuse hardware context cpumask for tags blk-mq: add a flags parameter to blk_mq_alloc_request Revert "blk-flush: Queue through IO scheduler when flush not required" block: clarify blk_add_timer() use case for blk-mq bio: use offset_in_page macro block: do not initialise statics to 0 or NULL block: do not initialise globals to 0 or NULL block: rename request_queue slab cache
2016-01-19IB/srpt: Remove redundant wc arraySagi Grimberg
No usage after the conversion to the new CQ API. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/qib: Improve ipoib UD performanceMike Marciniszyn
Based on profiling, UD performance drops in case of processes in a single client due to excess context switches when the progress workqueue is scheduled. This is solved by modifying the heuristic to select the direct progress instead of the scheduling progress via the workqueue when UD-like situations are detected in the heuristic. Reviewed-by: Vinit Agnihotri <vinit.abhay.agnihotri@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx4: Advertise RoCE v2 supportMatan Barak
Advertise RoCE v2 support in port_immutable attributes according to the hardware's capabilities. This enables the verbs stack to use RoCE v2 mode. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx4: Create and use another QP1 for RoCEv2Moni Shoua
The mlx4 driver uses a special QP to implement the GSI QP. This kind of QP allows to build the InfiniBand headers in software. When mlx4 hardware builds the packet, it calculates the ICRC and puts it at the end of the payload. However, this ICRC calculation depends on the QP configuration, which is determined when the QP is modified (roce_mode during INIT->RTR). When receiving a packet, the ICRC verification doesn't depend on this configuration. Therefore, using two GSI QPs for send (one for each RoCE version) and one GSI QP for receive are required. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx4: Enable send of RoCE QP1 packets with IP/UDP headersMoni Shoua
RoCEv2 packets are sent over IP/UDP protocols. The mlx4 driver uses a type of RAW QP to send packets for QP1 and therefore needs to build the network headers below BTH in software. This patch adds option to build QP1 packets with IP and UDP headers if RoCEv2 is requested. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx4: Enable RoCE v2 when the IB device is addedMoni Shoua
If the hardware supports RoCE v2, we configure the hardware UDP port according to the RoCE v2 Annex when mlx4_ib device is added. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx4: Support modify_qp for RoCE v2Moni Shoua
In order to support modify_qp for RoCE v2, we need to set the gid_type in the QP context. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/core: Add definition for the standard RoCE V2 UDP portMoni Shoua
This will be used in hardware device driver when building QP or AH contexts. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19net/mlx4_core: Add support for RoCE v2 entropyMoni Shoua
In RoCE v2 we need to choose a source UDP port, we do so by using entropy over the source and dest QPNs. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19net/mlx4_core: Add support for configuring RoCE v2 UDP portMoni Shoua
In order to support RoCE v2, the hardware needs to be configured to classify certain UDP packets as RoCE v2 packets and pass it through its RoCE pipeline. This patch enables configuring this UDP port. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx4: Add support for setting RoCEv2 gids in hardwareMoni Shoua
To tell hardware about a gid with type RoCEv2, software needs a new modifier to the SET_PORT command: MLX4_SET_PORT_ROCE_ADDR. This can replace the old method, MLX4_SET_PORT_GID_TABLE, for RoCEv1 gids. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19net/mlx4_core: Configure mlx4 hardware for mixed RoCE v1/v2 modesMoni Shoua
If the hardware supports RoCE v2 (mixed with RoCE v1) mode, we enable it. This is necessary in order to support RoCE v2. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx4: Add gid_type to GID propertiesMoni Shoua
IB core driver adds a property of type to struct ib_gid_attr. The mlx4 driver should take that in consideration when modifying or querying the hardware gid table. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19net/mlx4: Query RoCE supportMoni Shoua
Query the RoCE support from firmware using the appropriate firmware commands. Downstream patches will read these capabilities and act accordingly. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19svc_rdma: use local_dma_lkeyChristoph Hellwig
We now alwasy have a per-PD local_dma_lkey available. Make use of that fact in svc_rdma and stop registering our own MR. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Acked-by: J. Bruce Fields <bfields@redhat.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19svcrdma: Add class for RDMA backwards direction transportChuck Lever
To support the server-side of an NFSv4.1 backchannel on RDMA connections, add a transport class that enables backward direction messages on an existing forward channel connection. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Bruce Fields <bfields@fieldses.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19svcrdma: Define maximum number of backchannel requestsChuck Lever
Extra resources for handling backchannel requests have to be pre-allocated when a transport instance is created. Set up additional fields in svcxprt_rdma to track these resources. The max_requests fields are elements of the RPC-over-RDMA protocol, so they should be u32. To ensure that unsigned arithmetic is used everywhere, some other fields in the svcxprt_rdma struct are updated. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Bruce Fields <bfields@fieldses.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19svcrdma: Make map_xdr non-staticChuck Lever
Pre-requisite to use map_xdr in the backchannel code. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Bruce Fields <bfields@fieldses.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19svcrdma: Remove last two __GFP_NOFAIL call sitesChuck Lever
Clean up. These functions can otherwise fail, so check for page allocation failures too. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Bruce Fields <bfields@fieldses.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19svcrdma: Add gfp flags to svc_rdma_post_recv()Chuck Lever
svc_rdma_post_recv() allocates pages for receive buffers on-demand. It uses GFP_KERNEL so the allocator tries hard, and may sleep. But I'm about to add a call to svc_rdma_post_recv() from a function that may not sleep. Since all svc_rdma_post_recv() call sites can tolerate its failure, allow it to fail if the page allocator returns nothing. Longer term, receive buffers, being a finite resource per-connection, should be pre-allocated and re-used. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Bruce Fields <bfields@fieldses.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19svcrdma: Remove unused req_map and ctxt kmem_cachesChuck Lever
Clean up. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Bruce Fields <bfields@fieldses.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19svcrdma: Improve allocation of struct svc_rdma_req_mapChuck Lever
To ensure this allocation cannot fail and will not sleep, pre-allocate the req_map structures per-connection. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Bruce Fields <bfields@fieldses.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19svcrdma: Improve allocation of struct svc_rdma_op_ctxtChuck Lever
When the maximum payload size of NFS READ and WRITE was increased by commit cc9a903d915c ("svcrdma: Change maximum server payload back to RPCSVC_MAXPAYLOAD"), the size of struct svc_rdma_op_ctxt increased to over 6KB (on x86_64). That makes allocating one of these from a kmem_cache more likely to fail in situations when system memory is exhausted. Since I'm about to add a caller where this allocation must always work _and_ it cannot sleep, pre-allocate ctxts for each connection. Another motivation for this change is that NFSv4.x servers are required by specification not to drop NFS requests. Pre-allocating memory resources reduces the likelihood of a drop. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Bruce Fields <bfields@fieldses.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19svcrdma: Clean up process_context()Chuck Lever
Be sure the completed ctxt is put in every path. The xprt enqueue can take a while, so put the completed ctxt back in circulation _before_ enqueuing the xprt. Remove/disable debugging. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Bruce Fields <bfields@fieldses.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19svcrdma: Clean up rdma_create_xprt()Chuck Lever
kzalloc is used here, so setting the atomic fields to zero is unnecessary. sc_ord is set again in handle_connect_req. The other fields are re-initialized in svc_rdma_accept(). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Acked-by: Bruce Fields <bfields@fieldses.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/core: Use hop-limit from IP stack for RoCEMatan Barak
Previously, IPV6_DEFAULT_HOPLIMIT was used as the hop limit value for RoCE. Fixing that by taking ip4_dst_hoplimit and ip6_dst_hoplimit as hop limit values. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/core: Rename rdma_addr_find_dmac_by_grhMatan Barak
rdma_addr_find_dmac_by_grh resolves dmac, vlan_id and if_index and downsteram patch will also add hop_limit as an output parameter, thus we rename it to rdma_addr_find_l2_eth_by_grh. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/cm: Fix a recently introduced deadlockBart Van Assche
ib_send_cm_drep() calls cm_enter_timewait() while holding a spinlock that can be locked from inside an interrupt handler. Hence do not enable interrupts inside cm_enter_timewait() if called with interrupts disabled. This patch fixes e.g. the following deadlock: Acked-by: Erez Shitrit <erezsh@mellanox.com> ================================= [ INFO: inconsistent lock state ] 4.4.0-rc7+ #1 Tainted: G E --------------------------------- inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. swapper/8/0 [HC1[1]:SC0[0]:HE0:SE1] takes: (&(&cm_id_priv->lock)->rlock){?.+...}, at: [<ffffffffa036eec4>] cm_establish+0x 74/0x1b0 [ib_cm] {HARDIRQ-ON-W} state was registered at: [<ffffffff810a3c11>] mark_held_locks+0x71/0x90 [<ffffffff810a3e87>] trace_hardirqs_on_caller+0xa7/0x1c0 [<ffffffff810a3fad>] trace_hardirqs_on+0xd/0x10 [<ffffffff8151c40b>] _raw_spin_unlock_irq+0x2b/0x40 [<ffffffffa036ea8e>] cm_enter_timewait+0xae/0x100 [ib_cm] [<ffffffffa036ff76>] ib_send_cm_drep+0xb6/0x190 [ib_cm] [<ffffffffa052ed08>] srp_cm_handler+0x128/0x1a0 [ib_srp] [<ffffffffa0370340>] cm_process_work+0x20/0xf0 [ib_cm] [<ffffffffa0371335>] cm_dreq_handler+0x135/0x2c0 [ib_cm] [<ffffffffa03733c5>] cm_work_handler+0x75/0xd0 [ib_cm] [<ffffffff8107184d>] process_one_work+0x1bd/0x460 [<ffffffff81073148>] worker_thread+0x118/0x420 [<ffffffff81078454>] kthread+0xe4/0x100 [<ffffffff8151cbbf>] ret_from_fork+0x3f/0x70 irq event stamp: 1672286 hardirqs last enabled at (1672283): [<ffffffff81408ec0>] poll_idle+0x10/0x80 hardirqs last disabled at (1672284): [<ffffffff8151d304>] common_interrupt+0x84/0x89 softirqs last enabled at (1672286): [<ffffffff8105b4dc>] _local_bh_enable+0x1c/0x50 softirqs last disabled at (1672285): [<ffffffff8105b697>] irq_enter+0x47/0x70 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&cm_id_priv->lock)->rlock); <Interrupt> lock(&(&cm_id_priv->lock)->rlock); *** DEADLOCK *** no locks held by swapper/8/0. stack backtrace: CPU: 8 PID: 0 Comm: swapper/8 Tainted: G E 4.4.0-rc7+ #1 Hardware name: Dell Inc. PowerEdge R430/03XKDV, BIOS 1.0.2 11/17/2014 ffff88045af5e950 ffff88046e503a88 ffffffff81251c1b 0000000000000007 0000000000000006 0000000000000003 ffff88045af5ddc0 ffff88046e503ad8 ffffffff810a32f4 0000000000000000 0000000000000000 0000000000000001 Call Trace: <IRQ> [<ffffffff81251c1b>] dump_stack+0x4f/0x74 [<ffffffff810a32f4>] print_usage_bug+0x184/0x190 [<ffffffff810a36e2>] mark_lock_irq+0xf2/0x290 [<ffffffff810a3995>] mark_lock+0x115/0x1b0 [<ffffffff810a3b8c>] mark_irqflags+0x15c/0x170 [<ffffffff810a4fef>] __lock_acquire+0x1ef/0x560 [<ffffffff810a53c2>] lock_acquire+0x62/0x80 [<ffffffff8151bd33>] _raw_spin_lock_irqsave+0x43/0x60 [<ffffffffa036eec4>] cm_establish+0x74/0x1b0 [ib_cm] [<ffffffffa036f031>] ib_cm_notify+0x31/0x100 [ib_cm] [<ffffffffa0637f24>] srpt_qp_event+0x54/0xd0 [ib_srpt] [<ffffffffa0196052>] mlx4_ib_qp_event+0x72/0xc0 [mlx4_ib] [<ffffffffa00775b9>] mlx4_qp_event+0x69/0xd0 [mlx4_core] [<ffffffffa006000e>] mlx4_eq_int+0x51e/0xd50 [mlx4_core] [<ffffffffa006084f>] mlx4_msi_x_interrupt+0xf/0x20 [mlx4_core] [<ffffffff810b67b0>] handle_irq_event_percpu+0x40/0x110 [<ffffffff810b68bf>] handle_irq_event+0x3f/0x70 [<ffffffff810ba7f9>] handle_edge_irq+0x79/0x120 [<ffffffff81007f3d>] handle_irq+0x5d/0x130 [<ffffffff810071fd>] do_IRQ+0x6d/0x130 [<ffffffff8151d309>] common_interrupt+0x89/0x89 <EOI> [<ffffffff8140895f>] cpuidle_enter_state+0xcf/0x200 [<ffffffff81408aa2>] cpuidle_enter+0x12/0x20 [<ffffffff810990d6>] call_cpuidle+0x36/0x60 [<ffffffff81099163>] cpuidle_idle_call+0x63/0x110 [<ffffffff8109930a>] cpu_idle_loop+0xfa/0x130 [<ffffffff8109934e>] cpu_startup_entry+0xe/0x10 [<ffffffff8103c443>] start_secondary+0x83/0x90 Fixes: commit be4b499323bf ("IB/cm: Do not queue work to a device that's going away") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Erez Shitrit <erezsh@mellanox.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/srpt: Fix the RDMA completion handlersBart Van Assche
Avoid that the following kernel crash is triggered when processing an RDMA completion: BUG: unable to handle kernel paging request at 0000000100000198 IP: [<ffffffff810a4ea2>] __lock_acquire+0xa2/0x560 Call Trace: [<ffffffff810a53c2>] lock_acquire+0x62/0x80 [<ffffffff8151bd33>] _raw_spin_lock_irqsave+0x43/0x60 [<ffffffffa04fd437>] srpt_rdma_read_done+0x57/0x120 [ib_srpt] [<ffffffffa0144dd3>] __ib_process_cq+0x43/0xc0 [ib_core] [<ffffffffa0145115>] ib_cq_poll_work+0x25/0x70 [ib_core] [<ffffffff8107184d>] process_one_work+0x1bd/0x460 [<ffffffff81073148>] worker_thread+0x118/0x420 [<ffffffff81078454>] kthread+0xe4/0x100 [<ffffffff8151cbbf>] ret_from_fork+0x3f/0x70 Fixes: commit 59fae4deaad3 ("IB/srpt: chain RDMA READ/WRITE requests"). Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19irq_poll: Fix irq_poll_sched()Bart Van Assche
The IRQ_POLL_F_SCHED bit is set as long as polling is ongoing. This means that irq_poll_sched() must proceed if this bit has not yet been set. Fixes: commit ea51190c0315 ("irq_poll: fold irq_poll_sched_prep into irq_poll_sched"). Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/core: Fix dereference before checkMatan Barak
Sparse complains about dereference before check. Fixing this by moving the check before the dereference. Fixes: 200298326b27 ('IB/core: Validate route when we init ah') Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/core: Eliminate sparse false context imbalance warningMatan Barak
When write_gid function needs to do a sleep-able operation, it unlocks table->rwlock and then relocks it. Sparse complains about context imbalance. This is safe as write_gid is always called with table->rwlock. write_gid protects from simultaneous writes to this GID entry by setting the GID_TABLE_ENTRY_INVALID flag. Fixes: 9c584f049596 ('IB/core: Change per-entry lock in RoCE GID table to one lock') Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/core: sysfs.c: Fix PerfMgt ClassPortInfo handlingHal Rosenstock
Port number is not part of ClassPortInfo attribute but is still needed as a parameter when invoking process_mad. To properly handle this attribute, port_num is added as a parameter to get_counter_table and get_perf_mad was changed not to store port_num in the attribute itself when it's querying the ClassPortInfo attribute. This handles issue pointed out by Matan Barak <matanb@dev.mellanox.co.il> Fixes: 145d9c541032 ('IB/core: Display extended counter set if available') Signed-off-by: Hal Rosenstock <hal@mellanox.com> Acked-by: Matan Barak <matanb@mellanox.com> Acked-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Christoph Lameter <cl@linux.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/core: Remove set-but-not-used variable from ib_sg_to_pages()Bart Van Assche
Detected this by building the IB core with W=1. See also patch "IB core: Fix ib_sg_to_pages()" (commit 8f5ba10ed40a). Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Sagi Grimberg <sagig@mellanox.com> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: Leon Romanovsky <leon.romanovsky@mellanox.com> Acked-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx5: Fix passing casted pointer in mlx5_query_port_roceLeon Romanovsky
Fix static checker warning: drivers/infiniband/hw/mlx5/main.c:149 mlx5_query_port_roce() warn: passing casted pointer '&props->qkey_viol_cntr' to 'mlx5_query_nic_vport_qkey_viol_cntr()' 32 vs 16. Fixes: 3f89a643eb29 ("IB/mlx5: Extend query_device/port to support RoCE") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mad: use CQ abstractionChristoph Hellwig
Remove the local workqueue to process mad completions and use the CQ API instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hal Rosenstock <hal@mellanox.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mad: pass ib_mad_send_buf explicitly to the recv_handlerChristoph Hellwig
Stop abusing wr_id and just pass the parameter explicitly. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hal Rosenstock <hal@mellanox.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19infiniband: Replace memset with eth_zero_addrLucas Tanure
Use eth_zero_addr to assign the zero address to the given address array instead of memset when second argument is address of zero. Signed-off-by: Lucas Tanure <tanure@linux.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx5: Delete locally redefined variableLeon Romanovsky
Fix the following sparse warning: drivers/infiniband/hw/mlx5/main.c:1061:29: warning: symbol 'pfn' shadows an earlier one drivers/infiniband/hw/mlx5/main.c:1030:21: originally declared here Fixes: d69e3bcf7976 ('IB/mlx5: Mmap the HCA's core clock register to user-space') Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19net/mlx4: Remove unused macroMoni Shoua
The macro mlx4_foreach_non_ib_transport_port() is not used anywhere. Remove it. Fixes: aa9a2d51a3e7 ("mlx4: Activate RoCE/SRIOV") Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx4: Take source mac from AH instead from the portMoni Shoua
In commit dbf727de7440 ("IB/core: Use GID table in AH creation and dmac resolution") we copy source mac to mlx4_ah from the attributes of gid at ib_ah_attr.grh.sgid_index. Now we can use it. Signed-off-by: Moni Shoua <monis@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx4: Initialize hop_limit when creating address handleMatan Barak
Hop limit value wasn't copied from attributes when ah was created. This may influence packets for unconnected services to get dropped in routers when endpoints are not in the same subnet. Fixes: fa417f7b520e ("IB/mlx4: Add support for IBoE") Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19IB/mlx5: Expose correct maximum number of CQE capacityLeon Romanovsky
Maximum number of EQE capacity per CQ was mistakenly exposed as CQE. Fix that. Fixes: 938fe83c8dcb ("net/mlx5_core: New device capabilities handling") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Cc: <stable@vger.kernel.org> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19iw_cxgb4: Take clip reference before starting IPv6 listenHariprasad S
The h/w is designed in such a way that, if you do anything IPv6 related, a valid clip entry must be there. So take clip reference before creating IPv6 listening servers, and then if we fail to create server, release the clip entry. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-01-19iw_cxgb4: Fixes GW-Basic labels to meaningful error namesHariprasad S
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-05 10:39:56 +0000