summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-11-02Bluetooth: virtio_bt: Use skb_put to set lengthSoenke Huster
By using skb_put we ensure that skb->tail is set correctly. Currently, skb->tail is always zero, which leads to errors, such as the following page fault in rfcomm_recv_frame: BUG: unable to handle page fault for address: ffffed1021de29ff #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page RIP: 0010:rfcomm_run+0x831/0x4040 (net/bluetooth/rfcomm/core.c:1751) Fixes: afd2daa26c7a ("Bluetooth: Add support for virtio transport driver") Signed-off-by: Soenke Huster <soenke.huster@eknoes.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-11-02Bluetooth: hci_conn: Fix CIS connection dst_type handlingPauli Virtanen
hci_connect_cis and iso_connect_cis call hci_bind_cis inconsistently with dst_type being either ISO socket address type or the HCI type, but these values cannot be mixed like this. Fix this by using only the HCI type. CIS connection dst_type was also not initialized in hci_bind_cis, even though it is used in hci_conn_hash_lookup_cis to find existing connections. Set the value in hci_bind_cis, so that existing CIS connections are found e.g. when doing deferred socket connections, also when dst_type is not 0 (ADDR_LE_DEV_PUBLIC). Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections") Signed-off-by: Pauli Virtanen <pav@iki.fi> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-11-02Bluetooth: L2CAP: Fix use-after-free caused by l2cap_reassemble_sduMaxim Mikityanskiy
Fix the race condition between the following two flows that run in parallel: 1. l2cap_reassemble_sdu -> chan->ops->recv (l2cap_sock_recv_cb) -> __sock_queue_rcv_skb. 2. bt_sock_recvmsg -> skb_recv_datagram, skb_free_datagram. An SKB can be queued by the first flow and immediately dequeued and freed by the second flow, therefore the callers of l2cap_reassemble_sdu can't use the SKB after that function returns. However, some places continue accessing struct l2cap_ctrl that resides in the SKB's CB for a short time after l2cap_reassemble_sdu returns, leading to a use-after-free condition (the stack trace is below, line numbers for kernel 5.19.8). Fix it by keeping a local copy of struct l2cap_ctrl. BUG: KASAN: use-after-free in l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth Read of size 1 at addr ffff88812025f2f0 by task kworker/u17:3/43169 Workqueue: hci0 hci_rx_work [bluetooth] Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:107 (discriminator 4)) print_report.cold (mm/kasan/report.c:314 mm/kasan/report.c:429) ? l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth kasan_report (mm/kasan/report.c:162 mm/kasan/report.c:493) ? l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth l2cap_rx (net/bluetooth/l2cap_core.c:7236 net/bluetooth/l2cap_core.c:7271) bluetooth ret_from_fork (arch/x86/entry/entry_64.S:306) </TASK> Allocated by task 43169: kasan_save_stack (mm/kasan/common.c:39) __kasan_slab_alloc (mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:469) kmem_cache_alloc_node (mm/slab.h:750 mm/slub.c:3243 mm/slub.c:3293) __alloc_skb (net/core/skbuff.c:414) l2cap_recv_frag (./include/net/bluetooth/bluetooth.h:425 net/bluetooth/l2cap_core.c:8329) bluetooth l2cap_recv_acldata (net/bluetooth/l2cap_core.c:8442) bluetooth hci_rx_work (net/bluetooth/hci_core.c:3642 net/bluetooth/hci_core.c:3832) bluetooth process_one_work (kernel/workqueue.c:2289) worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2437) kthread (kernel/kthread.c:376) ret_from_fork (arch/x86/entry/entry_64.S:306) Freed by task 27920: kasan_save_stack (mm/kasan/common.c:39) kasan_set_track (mm/kasan/common.c:45) kasan_set_free_info (mm/kasan/generic.c:372) ____kasan_slab_free (mm/kasan/common.c:368 mm/kasan/common.c:328) slab_free_freelist_hook (mm/slub.c:1780) kmem_cache_free (mm/slub.c:3536 mm/slub.c:3553) skb_free_datagram (./include/net/sock.h:1578 ./include/net/sock.h:1639 net/core/datagram.c:323) bt_sock_recvmsg (net/bluetooth/af_bluetooth.c:295) bluetooth l2cap_sock_recvmsg (net/bluetooth/l2cap_sock.c:1212) bluetooth sock_read_iter (net/socket.c:1087) new_sync_read (./include/linux/fs.h:2052 fs/read_write.c:401) vfs_read (fs/read_write.c:482) ksys_read (fs/read_write.c:620) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) Link: https://lore.kernel.org/linux-bluetooth/CAKErNvoqga1WcmoR3-0875esY6TVWFQDandbVZncSiuGPBQXLA@mail.gmail.com/T/#u Fixes: d2a7ac5d5d3a ("Bluetooth: Add the ERTM receive state machine") Fixes: 4b51dae96731 ("Bluetooth: Add streaming mode receive and incoming packet classifier") Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-11-02igc: Correct the launchtime offsetMuhammad Husaini Zulkifli
The launchtime offset should be corrected according to sections 7.5.2.6 Transmit Scheduling Latency of the Intel Ethernet I225/I226 Software User Manual. Software can compensate the latency between the transmission scheduling and the time that packet is transmitted to the network by setting this GTxOffset register. Without setting this register, there may be a significant delay between the packet scheduling and the network point. This patch helps to reduce the latency for each of the link speed. Before: 10Mbps : 11000 - 13800 nanosecond 100Mbps : 1300 - 1700 nanosecond 1000Mbps : 190 - 600 nanosecond 2500Mbps : 1400 - 1700 nanosecond After: 10Mbps : less than 750 nanosecond 100Mbps : less than 192 nanosecond 1000Mbps : less than 128 nanosecond 2500Mbps : less than 128 nanosecond Test Setup: Talker : Use l2_tai.c to generate the launchtime into packet payload. Listener: Use timedump.c to compute the delta between packet arrival and LaunchTime packet payload. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Acked-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-02Merge tag 'parisc-for-6.1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture fixes from Helge Deller: "This mostly handles oddities with the serial port 8250_gsc.c driver. Although the name suggests it's just for serial ports on the GSC bus (e.g. in older PA-RISC machines), it handles serial ports on PA-RISC PCI devices (e.g. on the SuperIO chip) as well. Thus this renames the driver to 8250_parisc and fixes the config dependencies. The other change is a cleanup on how the device IDs of devices in a PA-RISC machine are shown at startup" * tag 'parisc-for-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Avoid printing the hardware path twice parisc: Export iosapic_serial_irq() symbol for serial port driver MAINTAINERS: adjust entry after renaming parisc serial driver parisc: Use signed char for hardware path in pdc.h parisc/serial: Rename 8250_gsc.c to 8250_parisc.c parisc: Make 8250_gsc driver dependend on CONFIG_PARISC
2022-11-02netfilter: ipset: enforce documented limit to prevent allocating huge memoryJozsef Kadlecsik
Daniel Xu reported that the hash:net,iface type of the ipset subsystem does not limit adding the same network with different interfaces to a set, which can lead to huge memory usage or allocation failure. The quick reproducer is $ ipset create ACL.IN.ALL_PERMIT hash:net,iface hashsize 1048576 timeout 0 $ for i in $(seq 0 100); do /sbin/ipset add ACL.IN.ALL_PERMIT 0.0.0.0/0,kaf_$i timeout 0 -exist; done The backtrace when vmalloc fails: [Tue Oct 25 00:13:08 2022] ipset: vmalloc error: size 1073741848, exceeds total pages <...> [Tue Oct 25 00:13:08 2022] Call Trace: [Tue Oct 25 00:13:08 2022] <TASK> [Tue Oct 25 00:13:08 2022] dump_stack_lvl+0x48/0x60 [Tue Oct 25 00:13:08 2022] warn_alloc+0x155/0x180 [Tue Oct 25 00:13:08 2022] __vmalloc_node_range+0x72a/0x760 [Tue Oct 25 00:13:08 2022] ? hash_netiface4_add+0x7c0/0xb20 [Tue Oct 25 00:13:08 2022] ? __kmalloc_large_node+0x4a/0x90 [Tue Oct 25 00:13:08 2022] kvmalloc_node+0xa6/0xd0 [Tue Oct 25 00:13:08 2022] ? hash_netiface4_resize+0x99/0x710 <...> The fix is to enforce the limit documented in the ipset(8) manpage: > The internal restriction of the hash:net,iface set type is that the same > network prefix cannot be stored with more than 64 different interfaces > in a single set. Fixes: ccf0a4b7fc68 ("netfilter: ipset: Add bucketsize parameter to all hash types") Reported-by: Daniel Xu <dxu@dxuuu.xyz> Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-11-02Merge tag 'nfs-for-6.1-2' of git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds
Pull NFS client bugfixes from Anna Schumaker: - Fix some coccicheck warnings - Avoid memcpy() run-time warning - Fix up various state reclaim / RECLAIM_COMPLETE errors - Fix a null pointer dereference in sysfs - Fix LOCK races - Fix gss_unwrap_resp_integ() crasher - Fix zero length clones - Fix memleak when allocate slot fails * tag 'nfs-for-6.1-2' of git://git.linux-nfs.org/projects/anna/linux-nfs: nfs4: Fix kmemleak when allocate slot failed NFSv4.2: Fixup CLONE dest file size for zero-length count SUNRPC: Fix crasher in gss_unwrap_resp_integ() NFSv4: Retry LOCK on OLD_STATEID during delegation return SUNRPC: Fix null-ptr-deref when xps sysfs alloc failed NFSv4.1: We must always send RECLAIM_COMPLETE after a reboot NFSv4.1: Handle RECLAIM_COMPLETE trunking errors NFSv4: Fix a potential state reclaim deadlock NFS: Avoid memcpy() run-time warning for struct sockaddr overflows nfs: Remove redundant null checks before kfree
2022-11-02Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma fixes from Jason Gunthorpe: "Fix a few more of the usual sorts of bugs: - Another regression with source route validation in CMA, introduced this merge window - Crash in hfi1 due to faulty list operations - PCI ID updates for EFA - Disable LOCAL_INV in hns because it causes a HW hang - Crash in hns due to missing initialization - Memory leak in rxe - Missing error unwind during ib_core module loading - Missing error handling in qedr around work queue creation during startup" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/qedr: clean up work queue on failure in qedr_alloc_resources() RDMA/core: Fix null-ptr-deref in ib_core_cleanup() RDMA/rxe: Fix mr leak in RESPST_ERR_RNR RDMA/hns: Fix NULL pointer problem in free_mr_init() RDMA/hns: Disable local invalidate operation RDMA/efa: Add EFA 0xefa2 PCI ID IB/hfi1: Correctly move list in sc_disable() RDMA/cma: Use output interface for net_dev check
2022-11-02e1000: Remove unnecessary use of kmap_atomic()Anirudh Venkataramanan
buffer_info->rxbuf.page accessed in e1000_clean_jumbo_rx_irq() is allocated using GFP_ATOMIC. Pages allocated with GFP_ATOMIC can't come from highmem and so there's no need to kmap() them. Just use page_address(). I don't have access to a 32-bit system so did some limited testing on qemu (qemu-system-i386 -m 4096 -smp 4 -device e1000e) with a 32-bit Debian 11.04 image. Cc: Ira Weiny <ira.weiny@intel.com> Cc: Fabio M. De Francesco <fmdefrancesco@gmail.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Tony Nguyen <anthony.l.nguyen@intel.com> Suggested-by: Ira Weiny <ira.weiny@intel.com> Suggested-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-02e1000e: Remove unnecessary use of kmap_atomic()Anirudh Venkataramanan
alloc_rx_buf() allocates ps_page->page and buffer_info->page using either GFP_ATOMIC or GFP_KERNEL. Memory allocated with GFP_KERNEL/GFP_ATOMIC can't come from highmem and so there's no need to kmap() them. Just use page_address(). I don't have access to a 32-bit system so did some limited testing on qemu (qemu-system-i386 -m 4096 -smp 4 -device e1000e) with a 32-bit Debian 11.04 image. Cc: Ira Weiny <ira.weiny@intel.com> Cc: Fabio M. De Francesco <fmdefrancesco@gmail.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Tony Nguyen <anthony.l.nguyen@intel.com> Suggested-by: Ira Weiny <ira.weiny@intel.com> Suggested-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-02e1000e: Add e1000e trace moduleSasha Neftin
Add tracepoints to the driver via a new file e1000e_trace.h and some new trace calls added in interesting places in the driver. Add some tracing for s0ix flows to help in a debug of shared resources with the CSME firmware. The idea here is that tracepoints have such low performance cost when disabled that we can leave these in the upstream driver. Performance not affected, and this can be very useful for debugging and adding new trace events to paths in the future. Usage: echo "e1000e_trace:*" > /sys/kernel/debug/tracing/set_event echo 1 > /sys/kernel/debug/tracing/events/e1000e_trace/enable Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-02e1000e: Add support for the next LOM generationSasha Neftin
Add devices IDs for the next LOM generations that will be available on the next Intel Client platforms. This patch provides the initial support for these devices. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-02e1000e: Separate MTP board type from ADPSasha Neftin
We have the same LAN controller on different PCH's. Separate MTP board type from an ADP which will allow for specific fixes to be applied for MTP platforms. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-02iavf: Change information about device removal in dmesgBartosz Staszewski
Changed information about device removal in dmesg. In function iavf_remove changed printed message from "Remove" to "Removing" after hot vf plug/unplug. Reason for this change is that, that "Removing" word is better because it is clearer for the user that the device is already being removed rather than implying that the user should remove this device. Signed-off-by: Bartosz Staszewski <bartoszx.staszewski@intel.com> Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-02iavf: Replace __FUNCTION__ with __func__ye xingchen
__FUNCTION__ exists only for backwards compatibility reasons with old gcc versions. Replace it with __func__. Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-02i40e: Add appropriate error message logged for incorrect duplex settingAlicja Kowalska
Nothing logged in dmesg for attempting to set incorrect duplex. Add appropriate error message logged for incorrect duplex setting. Signed-off-by: Alicja Kowalska <alicjax.kowalska@intel.com> Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-02i40e: Add i40e_napi_poll tracepointJoe Damato
Add a tracepoint for i40e_napi_poll that allows users to get detailed information about the amount of work done. This information can help users better tune the correct NAPI parameters (like weight and budget), as well as debug NIC settings like rx-usecs and tx-usecs, etc. When perf is attached, this tracepoint only fires when not in XDP mode. An example of the output from this tracepoint: $ sudo perf trace -e i40e:i40e_napi_poll -a --call-graph=fp --libtraceevent_print [..snip..] 388.258 :0/0 i40e:i40e_napi_poll(i40e_napi_poll on dev eth2 q i40e-eth2-TxRx-9 irq 346 irq_mask 00000000,00000000,00000000,00000000,00000000,00800000 curr_cpu 23 budget 64 bpr 64 rx_cleaned 28 tx_cleaned 0 rx_clean_complete 1 tx_clean_complete 1) i40e_napi_poll ([i40e]) i40e_napi_poll ([i40e]) __napi_poll ([kernel.kallsyms]) net_rx_action ([kernel.kallsyms]) __do_softirq ([kernel.kallsyms]) common_interrupt ([kernel.kallsyms]) asm_common_interrupt ([kernel.kallsyms]) intel_idle_irq ([kernel.kallsyms]) cpuidle_enter_state ([kernel.kallsyms]) cpuidle_enter ([kernel.kallsyms]) do_idle ([kernel.kallsyms]) cpu_startup_entry ([kernel.kallsyms]) [0x243fd8] ([kernel.kallsyms]) secondary_startup_64_no_verify ([kernel.kallsyms]) Signed-off-by: Joe Damato <jdamato@fastly.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-02i40e: Record number of RXes cleaned during NAPIJoe Damato
Adjust i40e_clean_rx_irq to accept an out parameter which records the number of RX packets cleaned. No XDP related code is modified and care has been taken to avoid changing control flow. Signed-off-by: Joe Damato <jdamato@fastly.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-02i40e: Record number TXes cleaned during NAPIJoe Damato
Update i40e_clean_tx_irq to take an out parameter (tx_cleaned) which stores the number TXs cleaned. No XDP related TX code is touched. Care has been taken to avoid changing the control flow of i40e_clean_tx_irq and i40e_napi_poll. Signed-off-by: Joe Damato <jdamato@fastly.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-02i40e: Store the irq number in i40e_q_vectorJoe Damato
Make it easy to figure out the IRQ number for a particular i40e_q_vector by storing the assigned IRQ in the structure itself. Signed-off-by: Joe Damato <jdamato@fastly.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-11-02Merge tag 'for-netdev' of ↵Jakub Kicinski
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== bpf-next 2022-11-02 We've added 70 non-merge commits during the last 14 day(s) which contain a total of 96 files changed, 3203 insertions(+), 640 deletions(-). The main changes are: 1) Make cgroup local storage available to non-cgroup attached BPF programs such as tc BPF ones, from Yonghong Song. 2) Avoid unnecessary deadlock detection and failures wrt BPF task storage helpers, from Martin KaFai Lau. 3) Add LLVM disassembler as default library for dumping JITed code in bpftool, from Quentin Monnet. 4) Various kprobe_multi_link fixes related to kernel modules, from Jiri Olsa. 5) Optimize x86-64 JIT with emitting BMI2-based shift instructions, from Jie Meng. 6) Improve BPF verifier's memory type compatibility for map key/value arguments, from Dave Marchevsky. 7) Only create mmap-able data section maps in libbpf when data is exposed via skeletons, from Andrii Nakryiko. 8) Add an autoattach option for bpftool to load all object assets, from Wang Yufen. 9) Various memory handling fixes for libbpf and BPF selftests, from Xu Kuohai. 10) Initial support for BPF selftest's vmtest.sh on arm64, from Manu Bretelle. 11) Improve libbpf's BTF handling to dedup identical structs, from Alan Maguire. 12) Add BPF CI and denylist documentation for BPF selftests, from Daniel Müller. 13) Check BPF cpumap max_entries before doing allocation work, from Florian Lehner. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (70 commits) samples/bpf: Fix typo in README bpf: Remove the obsolte u64_stats_fetch_*_irq() users. bpf: check max_entries before allocating memory bpf: Fix a typo in comment for DFS algorithm bpftool: Fix spelling mistake "disasembler" -> "disassembler" selftests/bpf: Fix bpftool synctypes checking failure selftests/bpf: Panic on hard/soft lockup docs/bpf: Add documentation for new cgroup local storage selftests/bpf: Add test cgrp_local_storage to DENYLIST.s390x selftests/bpf: Add selftests for new cgroup local storage selftests/bpf: Fix test test_libbpf_str/bpf_map_type_str bpftool: Support new cgroup local storage libbpf: Support new cgroup local storage bpf: Implement cgroup storage available to non-cgroup-attached bpf progs bpf: Refactor some inode/task/sk storage functions for reuse bpf: Make struct cgroup btf id global selftests/bpf: Tracing prog can still do lookup under busy lock selftests/bpf: Ensure no task storage failure for bpf_lsm.s prog due to deadlock detection bpf: Add new bpf_task_storage_delete proto with no deadlock detection bpf: bpf_task_storage_delete_recur does lookup first before the deadlock check ... ==================== Link: https://lore.kernel.org/r/20221102062120.5724-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-02Merge branch 'renesas-eswitch'David S. Miller
Yoshihiro Shimoda says: ==================== net: ethernet: renesas: Add support for "Ethernet Switch" This patch series is based on next-20221027. Add initial support for Renesas "Ethernet Switch" device of R-Car S4-8. The hardware has features about forwarding for an ethernet switch device. But, for now, it acts as ethernet controllers so that any forwarding offload features are not supported. So, any switchdev header files and DSA framework are not used. Notes that this driver requires some special settings on marvell10g, Especially host mactype and host speed. And, I need further investigation to modify the marvell10g driver for upstream. But, the special settings are applied, this rswitch driver can work correcfly without any changes of this rswitch driver. So, I believe the rswitch driver can go for upstream. Changes from v6: https://lore.kernel.org/all/20221028065458.2417293-1-yoshihiro.shimoda.uh@renesas.com/ - Add Reviewed-by tag in the patch [1/3]. - Fix ordering of initialization because NFS root can start mounting the filesystem before register_netdev() even returns Changes from v5: https://lore.kernel.org/all/20221027134034.2343230-1-yoshihiro.shimoda.uh@renesas.com/ - Add maxItems for the ethernet-port/port/reg property. Changes from v4: https://lore.kernel.org/all/20221019083518.933070-1-yoshihiro.shimoda.uh@renesas.com/ - Rebased on next-20221027. - Drop some unneeded properties on the dt-bindings doc. - Change the subject and commit descriptions on the patch [2/3]. - Use phylink instead of phylib. - Modify struct rswitch_*_desc to remove similar functions ([gs]et_dptr). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-02net: ethernet: renesas: rswitch: Add R-Car Gen4 gPTP supportYoshihiro Shimoda
Add R-Car Gen4 gPTP support into the rswitch driver. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-02net: ethernet: renesas: Add support for "Ethernet Switch"Yoshihiro Shimoda
Add initial support for Renesas "Ethernet Switch" device of R-Car S4-8. The hardware has features about forwarding for an ethernet switch device. But, for now, it acts as ethernet controllers so that any forwarding offload features are not supported. So, any switchdev header files and DSA framework are not used. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-02dt-bindings: net: renesas: Document Renesas Ethernet SwitchYoshihiro Shimoda
Document Renesas Etherent Switch for R-Car S4-8 (r8a779f0). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-02Merge branch 'misdn-fixes'David S. Miller
Yang Yingliang says: ==================== two fixes for mISDN This patchset fixes two issues when device_add() returns error. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-02isdn: mISDN: netjet: fix wrong check of device registrationYang Yingliang
The class is set in mISDN_register_device(), but if device_add() returns error, it will lead to delete a device without added, fix this by using device_is_registered() to check if the device is registered. Fixes: a900845e5661 ("mISDN: Add support for Traverse Technologies NETJet PCI cards") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-02mISDN: fix possible memory leak in mISDN_register_device()Yang Yingliang
Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array"), the name of device is allocated dynamically, add put_device() to give up the reference, so that the name can be freed in kobject_cleanup() when the refcount is 0. Set device class before put_device() to avoid null release() function WARN message in device_release(). Fixes: 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-02Merge branch 'txgbe'David S. Miller
Mengyuan Lou says: ==================== net: WangXun txgbe/ngbe ethernet driver This patch series adds support for WangXun NICS, to initialize interface from software to firmware. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-02net: ngbe: Initialize sw info and register netdevMengyuan Lou
Initialize ngbe mac/phy type. Check whether the firmware is initialized. Initialize ngbe hw and register netdev. Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-02net: txgbe: Add operations to interact with firmwareJiawen Wu
Add firmware interaction to get EEPROM information. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-02net: libwx: Implement interaction with firmwareJiawen Wu
Add mailbox commands to interact with firmware. Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-02veth: Avoid drop packets when xdp_redirect performsHeng Qi
In the current processing logic, when xdp_redirect occurs, it transmits the xdp frame based on napi. If napi of the peer veth is not ready, the veth will drop the packets. This doesn't meet our expectations. In this context, we enable napi of the peer veth automatically when the veth loads the xdp. Then if the veth unloads the xdp, we need to correctly judge whether to disable napi of the peer veth, because the peer veth may have loaded xdp, or even the user has enabled GRO. Signed-off-by: Heng Qi <henqqi@linux.alibaba.com> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-02nfc: Add KCOV annotationsDmitry Vyukov
Add remote KCOV annotations for NFC processing that is done in background threads. This enables efficient coverage-guided fuzzing of the NFC subsystem. The intention is to add annotations to background threads that process skb's that were allocated in syscall context (thus have a KCOV handle associated with the current fuzz test). This includes nci_recv_frame() that is called by the virtual nci driver in the syscall context. Signed-off-by: Dmitry Vyukov <dvyukov@google.com> Cc: Bongsu Jeon <bongsu.jeon@samsung.com> Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-02rose: Fix NULL pointer dereference in rose_send_frame()Zhang Qilong
The syzkaller reported an issue: KASAN: null-ptr-deref in range [0x0000000000000380-0x0000000000000387] CPU: 0 PID: 4069 Comm: kworker/0:15 Not tainted 6.0.0-syzkaller-02734-g0326074ff465 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022 Workqueue: rcu_gp srcu_invoke_callbacks RIP: 0010:rose_send_frame+0x1dd/0x2f0 net/rose/rose_link.c:101 Call Trace: <IRQ> rose_transmit_clear_request+0x1d5/0x290 net/rose/rose_link.c:255 rose_rx_call_request+0x4c0/0x1bc0 net/rose/af_rose.c:1009 rose_loopback_timer+0x19e/0x590 net/rose/rose_loopback.c:111 call_timer_fn+0x1a0/0x6b0 kernel/time/timer.c:1474 expire_timers kernel/time/timer.c:1519 [inline] __run_timers.part.0+0x674/0xa80 kernel/time/timer.c:1790 __run_timers kernel/time/timer.c:1768 [inline] run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1803 __do_softirq+0x1d0/0x9c8 kernel/softirq.c:571 [...] </IRQ> It triggers NULL pointer dereference when 'neigh->dev->dev_addr' is called in the rose_send_frame(). It's the first occurrence of the `neigh` is in rose_loopback_timer() as `rose_loopback_neigh', and the 'dev' in 'rose_loopback_neigh' is initialized sa nullptr. It had been fixed by commit 3b3fd068c56e3fbea30090859216a368398e39bf ("rose: Fix Null pointer dereference in rose_send_frame()") ever. But it's introduced by commit 3c53cd65dece47dd1f9d3a809f32e59d1d87b2b8 ("rose: check NULL rose_loopback_neigh->loopback") again. We fix it by add NULL check in rose_transmit_clear_request(). When the 'dev' in 'neigh' is NULL, we don't reply the request and just clear it. syzkaller don't provide repro, and I provide a syz repro like: r0 = syz_init_net_socket$bt_sco(0x1f, 0x5, 0x2) ioctl$sock_inet_SIOCSIFFLAGS(r0, 0x8914, &(0x7f0000000180)={'rose0\x00', 0x201}) r1 = syz_init_net_socket$rose(0xb, 0x5, 0x0) bind$rose(r1, &(0x7f00000000c0)=@full={0xb, @dev, @null, 0x0, [@null, @null, @netrom, @netrom, @default, @null]}, 0x40) connect$rose(r1, &(0x7f0000000240)=@short={0xb, @dev={0xbb, 0xbb, 0xbb, 0x1, 0x0}, @remote={0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x1}, 0x1, @netrom={0xbb, 0xbb, 0xbb, 0xbb, 0xbb, 0x0, 0x0}}, 0x1c) Fixes: 3c53cd65dece ("rose: check NULL rose_loopback_neigh->loopback") Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-02gve: Reduce alloc and copy costs in the GQ rx pathShailend Chand
Previously, even if just one of the many fragments of a 9k packet required a copy, we'd copy the whole packet into a freshly-allocated 9k-sized linear SKB, and this led to performance issues. By having a pool of pages to copy into, each fragment can be independently handled, leading to a reduced incidence of allocation and copy. Signed-off-by: Shailend Chand <shailend@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-02net: wwan: iosm: add rpc interface for xmm modemsShane Parslow
Add a new iosm wwan port that connects to the modem rpc interface. This interface provides a configuration channel, and in the case of the 7360, is the only way to configure the modem (as it does not support mbim). The new interface is compatible with existing software, such as open_xdatachannel.py from the xmm7360-pci project [1]. [1] https://github.com/xmm7360/xmm7360-pci Signed-off-by: Shane Parslow <shaneparslow808@gmail.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-02net: wwan: t7xx: Add port for modem loggingM Chetan Kumar
The Modem Logging (MDL) port provides an interface to collect modem logs for debugging purposes. MDL is supported by the relay interface, and the mtk_t7xx port infrastructure. MDL allows user-space apps to control logging via mbim command and to collect logs via the relay interface, while port infrastructure facilitates communication between the driver and the modem. Signed-off-by: Moises Veleta <moises.veleta@linux.intel.com> Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com> Acked-by: Ricardo Martinez <ricardo.martinez@linux.intel.com> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-02net: wwan: t7xx: use union to group port type specific dataM Chetan Kumar
Use union inside t7xx_port to group port type specific data members. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-11-02netfilter: nf_nat: Fix possible memory leak in nf_nat_init()Chen Zhongjin
In nf_nat_init(), register_nf_nat_bpf() can fail and return directly without any error handling. Then nf_nat_bysource will leak and registering of &nat_net_ops, &follow_master_nat and nf_nat_hook won't be reverted. This leaves wild ops in linkedlists and when another module tries to call register_pernet_operations() or nf_ct_helper_expectfn_register() it triggers page fault: BUG: unable to handle page fault for address: fffffbfff81b964c RIP: 0010:register_pernet_operations+0x1b9/0x5f0 Call Trace: <TASK> register_pernet_subsys+0x29/0x40 ebtables_init+0x58/0x1000 [ebtables] ... Fixes: 820dc0523e05 ("net: netfilter: move bpf_ct_set_nat_info kfunc in nf_nat_bpf.c") Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-11-02ipvs: fix WARNING in ip_vs_app_net_cleanup()Zhengchao Shao
During the initialization of ip_vs_app_net_init(), if file ip_vs_app fails to be created, the initialization is successful by default. Therefore, the ip_vs_app file doesn't be found during the remove in ip_vs_app_net_cleanup(). It will cause WRNING. The following is the stack information: name 'ip_vs_app' WARNING: CPU: 1 PID: 9 at fs/proc/generic.c:712 remove_proc_entry+0x389/0x460 Modules linked in: Workqueue: netns cleanup_net RIP: 0010:remove_proc_entry+0x389/0x460 Call Trace: <TASK> ops_exit_list+0x125/0x170 cleanup_net+0x4ea/0xb00 process_one_work+0x9bf/0x1710 worker_thread+0x665/0x1080 kthread+0x2e4/0x3a0 ret_from_fork+0x1f/0x30 </TASK> Fixes: 457c4cbc5a3d ("[NET]: Make /proc/net per network namespace") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-11-02ipvs: fix WARNING in __ip_vs_cleanup_batch()Zhengchao Shao
During the initialization of ip_vs_conn_net_init(), if file ip_vs_conn or ip_vs_conn_sync fails to be created, the initialization is successful by default. Therefore, the ip_vs_conn or ip_vs_conn_sync file doesn't be found during the remove. The following is the stack information: name 'ip_vs_conn_sync' WARNING: CPU: 3 PID: 9 at fs/proc/generic.c:712 remove_proc_entry+0x389/0x460 Modules linked in: Workqueue: netns cleanup_net RIP: 0010:remove_proc_entry+0x389/0x460 Call Trace: <TASK> __ip_vs_cleanup_batch+0x7d/0x120 ops_exit_list+0x125/0x170 cleanup_net+0x4ea/0xb00 process_one_work+0x9bf/0x1710 worker_thread+0x665/0x1080 kthread+0x2e4/0x3a0 ret_from_fork+0x1f/0x30 </TASK> Fixes: 61b1ab4583e2 ("IPVS: netns, add basic init per netns.") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-11-02ipvs: use explicitly signed charsJason A. Donenfeld
The `char` type with no explicit sign is sometimes signed and sometimes unsigned. This code will break on platforms such as arm, where char is unsigned. So mark it here as explicitly signed, so that the todrop_counter decrement and subsequent comparison is correct. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2022-11-01netlink: introduce bigendian integer typesFlorian Westphal
Jakub reported that the addition of the "network_byte_order" member in struct nla_policy increases size of 32bit platforms. Instead of scraping the bit from elsewhere Johannes suggested to add explicit NLA_BE types instead, so do this here. NLA_POLICY_MAX_BE() macro is removed again, there is no need for it: NLA_POLICY_MAX(NLA_BE.., ..) will do the right thing. NLA_BE64 can be added later. Fixes: 08724ef69907 ("netlink: introduce NLA_POLICY_MAX_BE") Reported-by: Jakub Kicinski <kuba@kernel.org> Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20221031123407.9158-1-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-01net: lan966x: Fix unmapping of received frames using FDMAHoratiu Vultur
When lan966x was receiving a frame, then it was building the skb and after that it was calling dma_unmap_single with frame size as the length. This actually has 2 issues: 1. It is using a length to map and a different length to unmap. 2. When the unmap was happening, the data was sync for cpu but it could be that this will overwrite what build_skb was initializing. The fix for these two problems is to change the order of operations. First to sync the frame for cpu, then to build the skb and in the end to unmap using the correct size but without sync the frame again for cpu. Fixes: c8349639324a ("net: lan966x: Add FDMA functionality") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20221031133421.1283196-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-01tcp: refine tcp_prune_ofo_queue() logicEric Dumazet
After commits 36a6503fedda ("tcp: refine tcp_prune_ofo_queue() to not drop all packets") and 72cd43ba64fc1 ("tcp: free batches of packets in tcp_prune_ofo_queue()") tcp_prune_ofo_queue() drops a fraction of ooo queue, to make room for incoming packet. However it makes no sense to drop packets that are before the incoming packet, in sequence space. In order to recover from packet losses faster, it makes more sense to only drop ooo packets which are after the incoming packet. Tested: packetdrill test: 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 +0 setsockopt(3, SOL_SOCKET, SO_RCVBUF, [3800], 4) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 1) = 0 +0 < S 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7> +0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 0> +.1 < . 1:1(0) ack 1 win 1024 +0 accept(3, ..., ...) = 4 +.01 < . 200:300(100) ack 1 win 1024 +0 > . 1:1(0) ack 1 <nop,nop, sack 200:300> +.01 < . 400:500(100) ack 1 win 1024 +0 > . 1:1(0) ack 1 <nop,nop, sack 400:500 200:300> +.01 < . 600:700(100) ack 1 win 1024 +0 > . 1:1(0) ack 1 <nop,nop, sack 600:700 400:500 200:300> +.01 < . 800:900(100) ack 1 win 1024 +0 > . 1:1(0) ack 1 <nop,nop, sack 800:900 600:700 400:500 200:300> +.01 < . 1000:1100(100) ack 1 win 1024 +0 > . 1:1(0) ack 1 <nop,nop, sack 1000:1100 800:900 600:700 400:500> +.01 < . 1200:1300(100) ack 1 win 1024 +0 > . 1:1(0) ack 1 <nop,nop, sack 1200:1300 1000:1100 800:900 600:700> // this packet is dropped because we have no room left. +.01 < . 1400:1500(100) ack 1 win 1024 +.01 < . 1:200(199) ack 1 win 1024 // Make sure kernel did not drop 200:300 sequence +0 > . 1:1(0) ack 300 <nop,nop, sack 1200:1300 1000:1100 800:900 600:700> // Make room, since our RCVBUF is very small +0 read(4, ..., 299) = 299 +.01 < . 300:400(100) ack 1 win 1024 +0 > . 1:1(0) ack 500 <nop,nop, sack 1200:1300 1000:1100 800:900 600:700> +.01 < . 500:600(100) ack 1 win 1024 +0 > . 1:1(0) ack 700 <nop,nop, sack 1200:1300 1000:1100 800:900> +0 read(4, ..., 400) = 400 +.01 < . 700:800(100) ack 1 win 1024 +0 > . 1:1(0) ack 900 <nop,nop, sack 1200:1300 1000:1100> +.01 < . 900:1000(100) ack 1 win 1024 +0 > . 1:1(0) ack 1100 <nop,nop, sack 1200:1300> +.01 < . 1100:1200(100) ack 1 win 1024 // This checks that 1200:1300 has not been removed from ooo queue +0 > . 1:1(0) ack 1300 Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20221101035234.3910189-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-01Merge branch 'net-lan966x-fixes-for-when-mtu-is-changed'Jakub Kicinski
Horatiu Vultur says: ==================== net: lan966x: Fixes for when MTU is changed There were multiple problems in different parts of the driver when the MTU was changed. The first problem was that the HW was missing to configure the correct value, it was missing ETH_HLEN and ETH_FCS_LEN. The second problem was when vlan filtering was enabled/disabled, the MRU was not adjusted corretly. While the last issue was that the FDMA was calculated wrongly the correct maximum MTU. ==================== Link: https://lore.kernel.org/r/20221030213636.1031408-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-01net: lan966x: Fix FDMA when MTU is changedHoratiu Vultur
When MTU is changed, FDMA is required to calculate what is the maximum size of the frame that it can received. So it can calculate what is the page order needed to allocate for the received frames. The first problem was that, when the max MTU was calculated it was reading the value from dev and not from HW, so in this way it was missing L2 header + the FCS. The other problem was that once the skb is created using __build_skb_around, it would reserve some space for skb_shared_info. So if we received a frame which size is at the limit of the page order then the creating will failed because it would not have space to put all the data. Fixes: 2ea1cbac267e ("net: lan966x: Update FDMA to change MTU.") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-01net: lan966x: Adjust maximum frame size when vlan is enabled/disabledHoratiu Vultur
When vlan filtering is enabled/disabled, it is required to adjust the maximum received frame size that it can received. When vlan filtering is enabled, it would all to receive extra 4 bytes, that are the vlan tag. So the maximum frame size would be 1522 with a vlan tag. If vlan filtering is disabled then the maximum frame size would be 1518 regardless if there is or not a vlan tag. Fixes: 6d2c186afa5d ("net: lan966x: Add vlan support.") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-01net: lan966x: Fix the MTU calculationHoratiu Vultur
When the MTU was changed, the lan966x didn't take in consideration the L2 header and the FCS. So the HW was configured with a smaller value than what was desired. Therefore the correct value to configure the HW would be new_mtu + ETH_HLEN + ETH_FCS_LEN. The vlan tag is not considered here, because at the time when the blamed commit was added, there was no vlan filtering support. The vlan fix will be part of the next patch. Fixes: d28d6d2e37d1 ("net: lan966x: add port module support") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 08:33:57 +0000