| Age | Commit message (Collapse) | Author |
|---|
|
- Rename find_resource() to find_resource_space() to make it more
descriptive for exporting outside resource.c (Ilpo Järvinen)
- Document find_resource_space() and the resource_constraint struct it uses
(Ilpo Järvinen)
- Add typedef resource_alignf to make it simpler to declare allocation
constraint alignf callbacks (Ilpo Järvinen)
- Open-code the no-constraint simple alignment case to make the
simple_align_resource() default callback unnecessary (Ilpo Järvinen)
- Export find_resource_space() because PCI bridge window allocation needs
to learn whether there's space for a window (Ilpo Järvinen)
- Fix a double-counting problem in PCI calculate_memsize() that led to
allocating larger windows each time a bus was removed and rescanned (Ilpo
Järvinen)
- When we don't have space to allocate larger bridge windows, allocate
windows only large enough for the downstream devices to prevent cases
where a device worked originally, but not after being removed and
re-added (Ilpo Järvinen)
* pci/resource:
PCI: Relax bridge window tail sizing rules
PCI: Make minimum bridge window alignment reference more obvious
PCI: Fix resource double counting on remove & rescan
resource: Export find_resource_space()
resource: Handle simple alignment inside __find_resource_space()
resource: Use typedef for alignf callback
resource: Document find_resource_space() and resource_constraint
resource: Rename find_resource() to find_resource_space()
|
|
- Warn about doing a Secondary Bus Reset without holding the device lock
(Dan Williams)
- Lock bridge in addition to downstream hierarchy before doing a Secondary
Bus Reset (Dan Williams)
* pci/reset:
PCI: Add missing bridge lock to pci_bus_lock()
PCI: Warn on missing cfg_access_lock during secondary bus reset
|
|
- Detect if a device was removed or replaced during system sleep so we
don't assume a new device is the one that used to be there. This uses
Vendor/Device/Subsystem/Class/Revision and Device Serial Number (if
implemented), so it's not fool-proof and drivers may know how to detect
more cases (Lukas Wunner)
- Add missing MODULE_DESCRIPTION() macro (Jeff Johnson)
* pci/hotplug:
PCI: acpiphp: Add missing MODULE_DESCRIPTION() macro
PCI: pciehp: Detect device replacement during system sleep
|
|
- Disable AER and DPC during suspend so that if they share an interrupt
with PME and errors occur during suspend, the AER or DPC interrupt
doesn't cause spurious wakeups (Kai-Heng Feng)
* pci/err:
PCI/DPC: Disable DPC service on suspend
PCI/AER: Disable AER service on suspend
|
|
- Move the PRESERVE_BOOT_CONFIG ACPI _DSM evaluation from drivers/acpi to
drivers/pci so we can unify with similar DT functionality (Vidya Sagar)
- Add of_pci_preserve_config() to check for a DT "linux,pci-probe-only"
property on a per-host bridge basis in addition to a global basis (Vidya
Sagar)
- Unify ACPI PRESERVE_BOOT_CONFIG _DSM and DT "linux,pci-probe-only" in a
generic pci_preserve_config() path (Vidya Sagar)
* pci/enumeration:
PCI: Use preserve_config in place of pci_flags
PCI: Unify ACPI and DT 'preserve config' support
PCI: of: Add of_pci_preserve_config() for per-host bridge support
PCI: Move PRESERVE_BOOT_CONFIG _DSM evaluation to pci_register_host_bridge()
|
|
- If there's a device below a bridge, prevent a use-after-free by holding a
reference to the device while waiting for the secondary bus to be ready
in case the device is concurrently removed, e.g., by DPC (Lukas Wunner)
* pci/dpc:
PCI/DPC: Fix use-after-free on concurrent DPC and hot-removal
|
|
- Add pcim_add_mapping_to_legacy_table() and
pcim_remove_mapping_from_legacy_table() helper functions to simplify
devres iomap table (Philipp Stanner)
- Reimplement devres that take a bit mask of BARs in a way that can be used
to map partial BARs as well as entire BARs (Philipp Stanner)
- Deprecate pcim_iomap_table() and pcim_iomap_regions_request_all() in
favor of pcim_* request plus pcim_* mapping (Philipp Stanner)
- Add pcim_request_region(), a managed interface to request a single BAR
(Philipp Stanner)
- Use the existing pci_is_enabled() interface to replace the struct
devres.enabled bit (Philipp Stanner)
- Move the struct pci_devres.pinned bit to struct pci_dev (Philipp Stanner)
- Reimplement pcim_set_mwi() so it uses its own devres cleanup callback
instead of a special-purpose bit in struct pci_devres (Philipp Stanner)
- Add pcim_intx(), which is unambiguously managed, unlike pci_intx(), which
is managed if pcim_enable_device() has been called but unmanaged
otherwise (Philipp Stanner)
- Remove pcim_release(), which is no longer needed after previous cleanups
of pcim_set_mwi() and pci_intx() (Philipp Stanner)
- Add pcim_iomap_range(), a managed interface to map part of a BAR (Philipp
Stanner)
- Fix vboxvideo leak by using the new pcim_iomap_range() instead of the
unmanaged pci_iomap_range() (Philipp Stanner)
* pci/devres:
drm/vboxvideo: fix mapping leaks
PCI: Add managed pcim_iomap_range()
PCI: Remove legacy pcim_release()
PCI: Add managed pcim_intx()
PCI: Give pcim_set_mwi() its own devres cleanup callback
PCI: Move struct pci_devres.pinned bit to struct pci_dev
PCI: Remove struct pci_devres.enabled status bit
PCI: Document hybrid devres hazards
PCI: Add managed pcim_request_region()
PCI: Deprecate pcim_iomap_table(), pcim_iomap_regions_request_all()
PCI: Add managed partial-BAR request and map infrastructure
PCI: Add devres helpers for iomap table
PCI: Add and use devres helper for bit masks
|
|
- Add ACS quirk for Broadcom BCM5760X NIC, which doesn't allow peer-to-peer
transactions between functions, but doesn't advertise ACS support (Ajit
Khaparde)
- Add "pci=config_acs=" kernel command-line parameter to relax default ACS
settings to enable peer-to-peer configurations. Requires expert
knowledge of topology and ACS operation (Vidya Sagar)
* pci/acs:
PCI: Extend ACS configurability
PCI: Add ACS quirk for Broadcom BCM5760X NIC
|
|
The LS7A chipset can be used as part of a PCIe Root Complex with
Loongson-3C6000 and similar CPUs. In this case, DEV_LS7A_PCIE_PORT5 has a
PCI_CLASS_BRIDGE_HOST class code, and it is a Type 0 Function whose config
space provides access to Root Complex registers.
The DEV_LS7A_PCIE_PORT5 has an MSI Capability, and its MSI Enable bit must
be set before other devices below the Root Complex can use MSI. This is
not the standard PCI behavior of MSI Enable, so the normal PCI MSI code
does not set it.
Set the DEV_LS7A_PCIE_PORT5 MSI Enable bit via a quirk so other devices
below the Root Complex can use MSI.
[kwilczynski: exit early to reduce indentation; commit log]
Link: https://lore.kernel.org/linux-pci/20240612065315.2048110-1-chenhuacai@loongson.cn
Signed-off-by: Sheng Wu <wusheng@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
|
|
Similarly to commit 0e03c643dc93 ("eth: fbnic: fix s390 build."),
the driver won't build if skb_shared_info has more than 25 frags
assuming a 64B cache line and 21 frags assuming a 128B cache line.
(512 - 48 - 64) / 16 = 25
(512 - 48 - 128) / 16 = 21
Fixes: 0cb4c0a13723 ("eth: fbnic: Implement Rx queue alloc/start/stop/free")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240717161600.1291544-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Signed-off-by: Masatake YAMATO <yamato@redhat.com>
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407141607.M3E2XQ0Z-lkp@intel.com/
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
Also remove trivial comment for increment_recovery_point.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9518
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
'struct dm_block_validator' are not modified in these drivers.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
32047 920 16 32983 80d7 drivers/md/dm-cache-metadata.o
After:
=====
text data bss dec hex filename
32075 896 16 32987 80db drivers/md/dm-cache-metadata.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
This commit introduces a new 'I' mode for dm-integrity.
The 'I' mode may be selected if the underlying device has non-power-of-2
sector size. In this mode, dm-integrity will store integrity data
directly in device's sectors and it will not use journal.
This mode improves performance and reduces flash wear because there would
be no journal writes.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
|
|
The new HAVE_PWRCTL option is defined in the PCI subsystem, so
selecting it unconditionally when PCI is disabled causes a harmless
warning:
WARNING: unmet direct dependencies detected for HAVE_PWRCTL
Depends on [n]: PCI [=n]
Selected by [y]:
- ARCH_QCOM [=y]
Add 'if PCI' in the qualcomm platform to hide the warning.
Fixes: ed70aaac7c35 ("Kconfig: reduce the amount of power sequencing noise")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Add sys_uretprobe entry to scripts/syscall.tbl as same as
arch/x86/entry/syscalls/syscall_64.tbl.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20240719102824.1e086a40@canb.auug.org.au/
Fixes: 63ded110979b ("uprobe: Change uretprobe syscall scope and number")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Pull bcachefs updates from Kent Overstreet:
- Metadata version 1.8: Stripe sectors accounting, BCH_DATA_unstriped
This splits out the accounting of dirty sectors and stripe sectors in
alloc keys; this lets us see stripe buckets that still have unstriped
data in them.
This is needed for ensuring that erasure coding is working correctly,
as well as completing stripe creation after a crash.
- Metadata version 1.9: Disk accounting rewrite
The previous disk accounting scheme relied heavily on percpu counters
that were also sharded by outstanding journal buffer; it was fast but
not extensible or scalable, and meant that all accounting counters
were recorded in every journal entry.
The new disk accounting scheme stores accounting as normal btree
keys; updates are deltas until they are flushed by the btree write
buffer.
This means we have no practical limit on the number of counters, and
a new tagged union format that's easy to extend.
We now have counters for compression type/ratio, per-snapshot-id
usage, per-btree-id usage, and pending rebalance work.
- Self healing on read IO/checksum error
Data is now automatically rewritten if we get a read error and then a
successful retry
- Mount API conversion (thanks to Thomas Bertschinger)
- Better lockdep coverage
Previously, btree node locks were tracked individually by lockdep,
like any other lock. But we may take _many_ btree node locks
simultaneously, we easily blow through the limit of 48 locks that
lockdep can track, leading to lockdep turning itself off.
Tracking each btree node lock individually isn't really necessary
since we have our own cycle detector for deadlock avoidance and
centralized tracking of btree node locks, so we now have a single
lockdep_map in btree_trans for "any btree nodes are locked".
- Some more small incremental work towards online check_allocations
- Lots more debugging improvements
- Fixes, including:
- undefined behaviour fixes, originally noted as breaking userspace
LTO builds
- fix a spurious warning in fsck_err, reported by Marcin
- fix an integer overflow on trans->nr_updates, also reported by
Marcin; this broke during deletion of highly fragmented indirect
extents
* tag 'bcachefs-2024-07-18.2' of https://evilpiepirate.org/git/bcachefs: (120 commits)
lockdep: Add comments for lockdep_set_no{validate,track}_class()
bcachefs: Fix integer overflow on trans->nr_updates
bcachefs: silence silly kdoc warning
bcachefs: Fix fsck warning about btree_trans not passed to fsck error
bcachefs: Add an error message for insufficient rw journal devs
bcachefs: varint: Avoid left-shift of a negative value
bcachefs: darray: Don't pass NULL to memcpy()
bcachefs: Kill bch2_assert_btree_nodes_not_locked()
bcachefs: Rename BCH_WRITE_DONE -> BCH_WRITE_SUBMITTED
bcachefs: __bch2_read(): call trans_begin() on every loop iter
bcachefs: show none if label is not set
bcachefs: drop packed, aligned from bkey_inode_buf
bcachefs: btree node scan: fall back to comparing by journal seq
bcachefs: Add lockdep support for btree node locks
lockdep: lockdep_set_notrack_class()
bcachefs: Improve copygc_wait_to_text()
bcachefs: Convert clock code to u64s
bcachefs: Improve startup message
bcachefs: Self healing on read IO error
bcachefs: Make read_only a mount option again, but hidden
...
|
|
Pull NFS client updates from Anna Schumaker:
"New Features:
- Add support for large folios
- Implement rpcrdma generic device removal notification
- Add client support for attribute delegations
- Use a LAYOUTRETURN during reboot recovery to report layoutstats
and errors
- Improve throughput for random buffered writes
- Add NVMe support to pnfs/blocklayout
Bugfixes:
- Fix rpcrdma_reqs_reset()
- Avoid soft lockups when using UDP
- Fix an nfs/blocklayout premature PR key unregestration
- Another fix for EXCHGID4_FLAG_USE_PNFS_DS for DS server
- Do not extend writes to the entire folio
- Pass explicit offset and count values to tracepoints
- Fix a race to wake up sleeping SUNRPC sync tasks
- Fix gss_status tracepoint output
Cleanups:
- Add missing MODULE_DESCRIPTION() macros
- Add blocklayout / SCSI layout tracepoints
- Remove asm-generic headers from xprtrdma verbs.c
- Remove unused 'struct mnt_fhstatus'
- Other delegation related cleanups
- Other folio related cleanups
- Other pNFS related cleanups
- Other xprtrdma cleanups"
* tag 'nfs-for-6.11-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (63 commits)
SUNRPC: Fixup gss_status tracepoint error output
SUNRPC: Fix a race to wake a sync task
nfs: split nfs_read_folio
nfs: pass explicit offset/count to trace events
nfs: do not extend writes to the entire folio
nfs/blocklayout: add support for NVMe
nfs: remove nfs_page_length
nfs: remove the unused max_deviceinfo_size field from struct pnfs_layoutdriver_type
nfs: don't reuse partially completed requests in nfs_lock_and_join_requests
nfs: move nfs_wait_on_request to write.c
nfs: fold nfs_page_group_lock_subrequests into nfs_lock_and_join_requests
nfs: fold nfs_folio_find_and_lock_request into nfs_lock_and_join_requests
nfs: simplify nfs_folio_find_and_lock_request
nfs: remove nfs_folio_private_request
nfs: remove dead code for the old swap over NFS implementation
NFSv4.1 another fix for EXCHGID4_FLAG_USE_PNFS_DS for DS server
nfs: Block on write congestion
nfs: Properly initialize server->writeback
nfs: Drop pointless check from nfs_commit_release_pages()
nfs/blocklayout: SCSI layout trace points for reservation key reg/unreg
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"Many cleanups and bug fixes in ext4, especially for the fast commit
feature.
Also some performance improvements; in particular, improving IOPS and
throughput on fast devices running Async Direct I/O by up to 20% by
optimizing jbd2_transaction_committed()"
* tag 'ext4_for_linus-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (40 commits)
ext4: make sure the first directory block is not a hole
ext4: check dot and dotdot of dx_root before making dir indexed
ext4: sanity check for NULL pointer after ext4_force_shutdown
jbd2: increase maximum transaction size
jbd2: drop pointless shrinker batch initialization
jbd2: avoid infinite transaction commit loop
jbd2: precompute number of transaction descriptor blocks
jbd2: make jbd2_journal_get_max_txn_bufs() internal
jbd2: avoid mount failed when commit block is partial submitted
ext4: avoid writing unitialized memory to disk in EA inodes
ext4: don't track ranges in fast_commit if inode has inlined data
ext4: fix possible tid_t sequence overflows
ext4: use ext4_update_inode_fsync_trans() helper in inode creation
ext4: add missing MODULE_DESCRIPTION()
jbd2: add missing MODULE_DESCRIPTION()
ext4: use memtostr_pad() for s_volume_name
jbd2: speed up jbd2_transaction_committed()
ext4: make ext4_da_map_blocks() buffer_head unaware
ext4: make ext4_insert_delayed_block() insert multi-blocks
ext4: factor out a helper to check the cluster allocation state
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix a missing rcu_read_unlock() in nsfs by switching to a cleanup
guard
- Add missing module descriptor for adfs
* tag 'vfs-6.11-rc1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
nsfs: use cleanup guard
fs/adfs: add MODULE_DESCRIPTION
|
|
Pull documentation updates from Jonathan Corbet:
"Nothing hugely exciting happening in the documentation tree this time
around, mostly more of the usual:
- More Spanish, Italian, and Chinese translations
- A new script, scripts/checktransupdate.py, can be used to see which
commits have touched an (English) document since a given
translation was last updated.
- A couple of "best practices" suggestions (on Link: tags and
off-list discussions) that were not entirely at consensus level,
but I concluded they were close enough to accept.
- Some nice cleanups removing documentation for kernel parameters
that have not been recognized for ... a long time.
...along with the usual updates, typo fixes, and such"
* tag 'docs-6.11' of git://git.lwn.net/linux: (57 commits)
Documentation: Document user_events ioctl code
docs/pinctrl: fix typo in mapping example
docs: maintainer: discourage taking conversations off-list
docs: driver-model: platform: update the definition of platform_driver
docs/sp_SP: Add translation for scheduler/sched-design-CFS.rst
writing_musb_glue_layer.rst: Fix broken URL
zh_CN/admin-guide: one typo fix
docs/zh_CN/virt: Update the translation of guest-halt-polling.rst
Documentation: add reference from dynamic debug to loglevel kernel params
Documentation: best practices for using Link trailers
Documentation: fix links to mailing list services
Documentation: exception-tables.rst: Fix the wrong steps referenced
docs/zh_CN: add process/researcher-guidelines Chinese translation
Documentation/tools/rv: fix document header
docs/sp_SP: Add translation of process/maintainer-kvm-x86.rst
docs/admin-guide/mm: correct typo 'quired' to 'queried'
Add libps2 to the input section of driver-api
Docs/mm/index: move allocation profiling document to unsorted documents chapter
Docs/mm/index: rename 'Legacy Documentation' to 'Unsorted Documentation'
Docs/mm/index: Remove 'Memory Management Guide' chapter marker
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc
Pull sparc updates from Andreas Larsson:
- Add MODULE_DESCRIPTION for a number of sbus drivers
- Fix linking error for large sparc32 kernels
- Fix incorrect functions signature and prototype warnings for sparc64
* tag 'sparc-for-6.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc:
sparc64: Fix prototype warnings in hibernate.c
sparc64: Fix prototype warning for prom_get_mmu_ihandle
sparc64: Fix incorrect function signature and add prototype for prom_cif_init
sparc64: Fix prototype warnings for floppy_64.h
sparc32: Fix truncated relocation errors when linking large kernels
sbus: add missing MODULE_DESCRIPTION() macros
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Remove restrictions on PAI NNPA and crypto counters, enabling
concurrent per-task and system-wide sampling and counting events
- Switch to GENERIC_CPU_DEVICES by setting up the CPU present mask in
the architecture code and letting the generic code handle CPU
bring-up
- Add support for the diag204 busy indication facility to prevent
undesirable blocking during hypervisor logical CPU utilization
queries. Implement results caching
- Improve the handling of Store Data SCLP events by suppressing
unnecessary warning, preventing buffer release in I/O during
failures, and adding timeout handling for Store Data requests to
address potential firmware issues
- Provide optimized __arch_hweight*() implementations
- Remove the unnecessary CPU KOBJ_CHANGE uevents generated during
topology updates, as they are unused and also not present on other
architectures
- Cleanup atomic_ops, optimize __atomic_set() for small values and
__atomic_cmpxchg_bool() for compilers supporting flag output
constraint
- Couple of cleanups for KVM:
- Move and improve KVM struct definitions for DAT tables from
gaccess.c to a new header
- Pass the asce as parameter to sie64a()
- Make the crdte() and cspg() page table handling wrappers return a
boolean to indicate success, like the other existing "compare and
swap" wrappers
- Add documentation for HWCAP flags
- Switch to obtaining total RAM pages from memblock instead of
totalram_pages() during mm init, to ensure correct calculation of
zero page size, when defer_init is enabled
- Refactor lowcore access and switch to using the get_lowcore()
function instead of the S390_lowcore macro
- Cleanups for PG_arch_1 and folio handling in UV and hugetlb code
- Add missing MODULE_DESCRIPTION() macros
- Fix VM_FAULT_HWPOISON handling in do_exception()
* tag 's390-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (54 commits)
s390/mm: Fix VM_FAULT_HWPOISON handling in do_exception()
s390/kvm: Move bitfields for dat tables
s390/entry: Pass the asce as parameter to sie64a()
s390/sthyi: Use cached data when diag is busy
s390/sthyi: Move diag operations
s390/hypfs_diag: Diag204 busy loop
s390/diag: Add busy-indication-facility requirements
s390/diag: Diag204 add busy return errno
s390/diag: Return errno's from diag204
s390/sclp: Diag204 busy indication facility detection
s390/atomic_ops: Make use of flag output constraint
s390/atomic_ops: Improve __atomic_set() for small values
s390/atomic_ops: Use symbolic names
s390/smp: Switch to GENERIC_CPU_DEVICES
s390/hwcaps: Add documentation for HWCAP flags
s390/pgtable: Make crdte() and cspg() return a value
s390/topology: Remove CPU KOBJ_CHANGE uevents
s390/sclp: Add timeout to Store Data requests
s390/sclp: Prevent release of buffer in I/O
s390/sclp: Suppress unnecessary Store Data warning
...
|
|
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
We can't have more updates than paths, so btree_path_idx_t is the
correct type to use.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
If a btree_trans is in use it's supposed to be passed to fsck_err so
that it can be unlocked if we're waiting on userspace input; but the
btree IO paths do call fsck errors where a btree_trans exists on the
stack but it's not passed through.
But it's ok, because it's unlocked while doing IO.
Fixes: a850bde6498b ("bcachefs: fsck_err() may now take a btree_trans")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
This causes us to go read-only - need an error message saying why.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
Shifting a negative value left is undefined.
Signed-off-by: Tavian Barnes <tavianator@tavianator.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 percpu updates from Ingo Molnar:
- Enable the named address spaces based percpu accessors optimization
on all GCC versions that contain this feature, detected through a
build-time testcase.
This effectively enables the feature on GCC 6, GCC 7 and GCC 8
versions.
- Fix operand constraint modifier in __raw_cpu_write()
- Reorganize the per-CPU headers for better readability
- Misc cleanups and fixes
* tag 'x86-percpu-2024-07-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/percpu: Enable named address spaces for all capable GCC versions
x86/percpu: Clean up <asm/percpu.h> vertical alignment details
x86/percpu: Clean up <asm/percpu.h> a bit
x86/percpu: Move some percpu accessors around to reduce ifdeffery
x86/percpu: Rename percpu_stable_op() to __raw_cpu_read_stable()
x86/percpu: Fix operand constraint modifier in __raw_cpu_write()
x86/percpu: Introduce the __raw_cpu_read_const() macro
x86/percpu: Unify percpu read-write accessors
x86/percpu: Move some percpu macros around for readability
x86/percpu: Introduce the pcpu_binary_op() macro
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
"The most prominent change this time is the kmem_buckets based
hardening of kmalloc() allocations from Kees Cook.
We have also extended the kmalloc() alignment guarantees for
non-power-of-two sizes in a way that benefits rust.
The rest are various cleanups and non-critical fixups.
- Dedicated bucket allocator (Kees Cook)
This series [1] enhances the probabilistic defense against heap
spraying/grooming of CONFIG_RANDOM_KMALLOC_CACHES from last year.
kmalloc() users that are known to be useful for exploits can get
completely separate set of kmalloc caches that can't be shared with
other users. The first converted users are alloc_msg() and
memdup_user().
The hardening is enabled by CONFIG_SLAB_BUCKETS.
- Extended kmalloc() alignment guarantees (Vlastimil Babka)
For years now we have guaranteed natural alignment for power-of-two
allocations, but nothing was defined for other sizes (in practice,
we have two such buckets, kmalloc-96 and kmalloc-192).
To avoid unnecessary padding in the rust layer due to its alignment
rules, extend the guarantee so that the alignment is at least the
largest power-of-two divisor of the requested size.
This fits what rust needs, is a superset of the existing
power-of-two guarantee, and does not in practice change the layout
(and thus does not add overhead due to padding) of the kmalloc-96
and kmalloc-192 caches, unless slab debugging is enabled for them.
- Cleanups and non-critical fixups (Chengming Zhou, Suren
Baghdasaryan, Matthew Willcox, Alex Shi, and Vlastimil Babka)
Various tweaks related to the new alloc profiling code, folio
conversion, debugging and more leftovers after SLAB"
Link: https://lore.kernel.org/all/20240701190152.it.631-kees@kernel.org/ [1]
* tag 'slab-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/memcg: alignment memcg_data define condition
mm, slab: move prepare_slab_obj_exts_hook under CONFIG_MEM_ALLOC_PROFILING
mm, slab: move allocation tagging code in the alloc path into a hook
mm/util: Use dedicated slab buckets for memdup_user()
ipc, msg: Use dedicated slab buckets for alloc_msg()
mm/slab: Introduce kmem_buckets_create() and family
mm/slab: Introduce kvmalloc_buckets_node() that can take kmem_buckets argument
mm/slab: Plumb kmem_buckets into __do_kmalloc_node()
mm/slab: Introduce kmem_buckets typedef
slab, rust: extend kmalloc() alignment guarantees to remove Rust padding
slab: delete useless RED_INACTIVE and RED_ACTIVE
slab: don't put freepointer outside of object if only orig_size
slab: make check_object() more consistent
mm: Reduce the number of slab->folio casts
mm, slab: don't wrap internal functions with alloc_hooks()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport:
- 'reserve_mem' command line parameter to allow creation of named
memory reservation at boot time.
The driving use-case is to improve the ability of pstore to retain
ramoops data across reboots.
- cleanups and small improvements in memblock and mm_init
- new tests cases in memblock test suite
* tag 'memblock-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock tests: fix implicit declaration of function 'numa_valid_node'
memblock: Move late alloc warning down to phys alloc
pstore/ramoops: Add ramoops.mem_name= command line option
mm/memblock: Add "reserve_mem" to reserved named memory at boot up
mm/mm_init.c: don't initialize page->lru again
mm/mm_init.c: not always search next deferred_init_pfn from very beginning
mm/mm_init.c: use deferred_init_mem_pfn_range_in_zone() to decide loop condition
mm/mm_init.c: get the highest zone directly
mm/mm_init.c: move nr_initialised reset down a bit
mm/memblock: fix a typo in description of for_each_mem_region()
mm/mm_init.c: use memblock_region_memory_base_pfn() to get startpfn
mm/memblock: use PAGE_ALIGN_DOWN to get pgend in free_memmap
mm/memblock: return true directly on finding overlap region
memblock tests: add memblock_overlaps_region_checks
mm/memblock: fix comment for memblock_isolate_range()
memblock tests: add memblock_reserve_many_may_conflict_check()
memblock tests: add memblock_reserve_all_locations_check()
mm/memblock: remove empty dummy entry
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Namhyung Kim:
"Build:
- Build each directory as a library so that depedency check for the
python extension module can be automatic
- Use pkg-config to check libtraceevent and libtracefs
perf sched:
- Add --task-name and --fuzzy-name options for `perf sched map`
It focuses on selected tasks only by removing unrelated tasks in
the output. It matches the task comm with the given string and the
--fuzzy-name option allows the partial matching:
$ sudo perf sched record -a sleep 1
$ sudo perf sched map --task-name kworker --fuzzy-name
. . . . - *A0 . . 481065.315131 secs A0 => kworker/5:2-i91:438521
. . . . - *- . . 481065.315160 secs
*B0 . . . - . . . 481065.316435 secs B0 => kworker/0:0-i91:437860
*- . . . . . . . 481065.316441 secs
. . . . . *A0 . . 481065.318703 secs
. . . . . *- . . 481065.318717 secs
. . *C0 . . . . . 481065.320544 secs C0 => kworker/u16:30-:430186
. . *- . . . . . 481065.320555 secs
. . *D0 . . . . . 481065.328524 secs D0 => kworker/2:0-kdm:429654
*B0 . D0 . - . . . 481065.328527 secs
*- . D0 . - . . . 481065.328535 secs
. . *- . . . . . 481065.328535 secs
- Fix -r/--repeat option of perf sched replay
The documentation said -1 will work as infinity but it didn't
accept the value. Update the code and document to use 0 instead
- Fix perf sched timehist to account the delay time for preempted
tasks
Perf event filtering:
- perf top gained filtering support on regular events using BPF like
perf record. Previously it was able to use it for tracepoints only
- The BPF filter now supports filtering by UID/GID. This should be
preferred than -u <UID> option as it's racy to scan /proc to check
tasks for the user and fails to open an event for the task if it's
already gone
$ sudo perf top -e cycles --filter "uid == $(id -u)"
perf report:
- Skip dummy events in the group output by default. The --skip-empty
option controls display of empty events without samples. But perf
report can force display all events in a group
In this case, auto-added a dummy event (for a system-wide record)
ends up in the output. Now it can skip those empty events even in
the group display mode
To preserve the old behavior, run this:
$ perf report --group --no-skip-empty
perf stat:
- Choose the most disaggregate option when multiple aggregation
options are given. It used to pick the last option in the command
line but it can be confusing and not consistent. Now it'll choose
the smallest unit
For example, it'd aggregate the result per-core when the user gave
both --per-socket and --per-core options at the same time
Internals:
- Fix `perf bench` when some CPUs are offline
- Fix handling of JIT symbol mappings to accept "/tmp/perf-${PID}.map
patterns only so that it can not be confused by other /tmp/perf-*
files
- Many improvements and fixes for `perf test`
Others:
- Support some new instructions for Intel-PT
- Fix syscall ID mapping in perf trace
- Document AMD IBS PMU usages
- Change `perf lock info` to show map and thread info by default
Vendor JSON events:
- Update Intel events and metrics
- Add i.MX9[35] DDR metrics"
* tag 'perf-tools-for-v6.11-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (125 commits)
perf trace: Fix iteration of syscall ids in syscalltbl->entries
perf dso: Fix address sanitizer build
perf mem: Warn if memory events are not supported on all CPUs
perf arm-spe: Support multiple Arm SPE PMUs
perf build x86: Fix SC2034 error in syscalltbl.sh
perf record: Fix memset out-of-range error
perf sched map: Add --fuzzy-name option for fuzzy matching in task names
perf sched map: Add support for multiple task names using CSV
perf sched map: Add task-name option to filter the output map
perf build: Conditionally add feature check flags for libtrace{event,fs}
perf install: Don't propagate subdir to Documentation submake
perf vendor events arm64:: Add i.MX95 DDR Performance Monitor metrics
perf vendor events arm64:: Add i.MX93 DDR Performance Monitor metrics
perf dsos: When adding a dso into sorted dsos maintain the sort order
perf comm str: Avoid sort during insert
perf report: Calling available function for stats printing
perf intel-pt: Fix exclude_guest setting
perf intel-pt: Fix aux_watermark calculation for 64-bit size
perf sched replay: Fix -r/--repeat command line option for infinity
perf: pmus: Remove unneeded semicolon
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing CREDITS file update from Steven Rostedt:
"Update of MAINTAINERS and CREDITS file
- Update Daniel Bristot de Oliveira's entry in MAINTAINERS with
respect to his tracing code.
- Add more credits to him in CREDITS file and move his entry to be
alphabetical"
* tag 'trace-v6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Update MAINTAINERS file
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing tools updates from Steven Rostedt:
"Trivial updates for 6.11:
- Use pretty formatting only on interactive tty in rtla/osnoise
- Better reporting when histogram is empty in rtla/osnoise
- Use the correct library name for "libtracefs" in feature detection"
* tag 'trace-tools-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tools: build: use correct lib name for libtracefs feature detection
rtla/osnoise: Better report when histogram is empty
rtla/osnoise: Use pretty formatting only on interactive tty
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ftrace updates from Steven Rostedt:
"Rewrite of function graph tracer to allow multiple users
Up until now, the function graph tracer could only have a single user
attached to it. If another user tried to attach to the function graph
tracer while one was already attached, it would fail. Allowing
function graph tracer to have more than one user has been asked for
since 2009, but it required a rewrite to the logic to pull it off so
it never happened. Until now!
There's three systems that trace the return of a function. That is
kretprobes, function graph tracer, and BPF. kretprobes and function
graph tracing both do it similarly. The difference is that kretprobes
uses a shadow stack per callback and function graph tracer creates a
shadow stack for all tasks. The function graph tracer method makes it
possible to trace the return of all functions. As kretprobes now needs
that feature too, allowing it to use function graph tracer was needed.
BPF also wants to trace the return of many probes and its method
doesn't scale either. Having it use function graph tracer would
improve that.
By allowing function graph tracer to have multiple users allows both
kretprobes and BPF to use function graph tracer in these cases. This
will allow kretprobes code to be removed in the future as it's version
will no longer be needed.
Note, function graph tracer is only limited to 16 simultaneous users,
due to shadow stack size and allocated slots"
* tag 'ftrace-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (49 commits)
fgraph: Use str_plural() in test_graph_storage_single()
function_graph: Add READ_ONCE() when accessing fgraph_array[]
ftrace: Add missing kerneldoc parameters to unregister_ftrace_direct()
function_graph: Everyone uses HAVE_FUNCTION_GRAPH_RET_ADDR_PTR, remove it
function_graph: Fix up ftrace_graph_ret_addr()
function_graph: Make fgraph_update_pid_func() a stub for !DYNAMIC_FTRACE
function_graph: Rename BYTE_NUMBER to CHAR_NUMBER in selftests
fgraph: Remove some unused functions
ftrace: Hide one more entry in stack trace when ftrace_pid is enabled
function_graph: Do not update pid func if CONFIG_DYNAMIC_FTRACE not enabled
function_graph: Make fgraph_do_direct static key static
ftrace: Fix prototypes for ftrace_startup/shutdown_subops()
ftrace: Assign RCU list variable with rcu_assign_ptr()
ftrace: Assign ftrace_list_end to ftrace_ops_list type cast to RCU
ftrace: Declare function_trace_op in header to quiet sparse warning
ftrace: Add comments to ftrace_hash_move() and friends
ftrace: Convert "inc" parameter to bool in ftrace_hash_rec_update_modify()
ftrace: Add comments to ftrace_hash_rec_disable/enable()
ftrace: Remove "filter_hash" parameter from __ftrace_hash_rec_update()
ftrace: Rename dup_hash() and comment it
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
"Trivial updates for 6.11:
- Set rtla/osnoise default threshold to 1us from 5us
The 5us default was missing noise that people cared about. Changing
it to 1us makes it work as expected.
- Restructure how sched_switch prev_comm and next_comm was being saved
The prev_comm was being saved along with the other next fields, and
the next_comm was being saved along with the other prev fields.
This is just a cosmetic change.
- Have the allocation of pid_list use GFP_NOWAIT instead of GFP_KERNEL
The allocation can happen in irq_work context, but luckily, the
size was by default so large, it was never triggered. But in case
it ever is, use the NOWAIT allocation in the interrupt context.
- Fix some kernel doc errors"
* tag 'trace-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
trace/pid_list: Change gfp flags in pid_list_fill_irq()
tracing/sched: sched_switch: place prev_comm and next_comm in right order
rtla/osnoise: set the default threshold to 1us
tracing: Fix trace_pid_list_free() kernel-doc
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig update from Masami Hiramatsu:
- Remove duplicate included header file linux/bootconfig.h from
lib/bootconfig.c. This is a cleanup, no behavior change.
* tag 'bootconfig-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
bootconfig: Remove duplicate included header file linux/bootconfig.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
"Uprobes:
- x86/shstk: Make return uprobe work with shadow stack
- Add uretprobe syscall which speeds up the uretprobe 10-30% faster.
This syscall is automatically used from user-space trampolines
which are generated by the uretprobe. If this syscall is used by
normal user program, it will cause SIGILL. Note that this is
currently only implemented on x86_64.
(This also has two fixes for adjusting the syscall number to avoid
conflict with new *attrat syscalls.)
- uprobes/perf: fix user stack traces in the presence of pending
uretprobe. This corrects the uretprobe's trampoline address in the
stacktrace with correct return address
- selftests/x86: Add a return uprobe with shadow stack test
- selftests/bpf: Add uretprobe syscall related tests.
- test case for register integrity check
- test case with register changing case
- test case for uretprobe syscall without uprobes (expected to fail)
- test case for uretprobe with shadow stack
- selftests/bpf: add test validating uprobe/uretprobe stack traces
- MAINTAINERS: Add uprobes entry. This does not specify the tree but
to clarify who maintains and reviews the uprobes
Kprobes:
- tracing/kprobes: Test case cleanups.
Replace redundant WARN_ON_ONCE() + pr_warn() with WARN_ONCE() and
remove unnecessary code from selftest
- tracing/kprobes: Add symbol counting check when module loads.
This checks the uniqueness of the probed symbol on modules. The
same check has already done for kernel symbols
(This also has a fix for build error with CONFIG_MODULES=n)
Cleanup:
- Add MODULE_DESCRIPTION() macros for fprobe and kprobe examples"
* tag 'probes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
MAINTAINERS: Add uprobes entry
selftests/bpf: Change uretprobe syscall number in uprobe_syscall test
uprobe: Change uretprobe syscall scope and number
tracing/kprobes: Fix build error when find_module() is not available
tracing/kprobes: Add symbol counting check when module loads
selftests/bpf: add test validating uprobe/uretprobe stack traces
perf,uprobes: fix user stack traces in the presence of pending uretprobes
tracing/kprobe: Remove cleanup code unrelated to selftest
tracing/kprobe: Integrate test warnings into WARN_ONCE
selftests/bpf: Add uretprobe shadow stack test
selftests/bpf: Add uretprobe syscall call from user space test
selftests/bpf: Add uretprobe syscall test for regs changes
selftests/bpf: Add uretprobe syscall test for regs integrity
selftests/x86: Add return uprobe shadow stack test
uprobe: Add uretprobe syscall to speed up return probe
uprobe: Wire up uretprobe system call
x86/shstk: Make return uprobe work with shadow stack
samples: kprobes: add missing MODULE_DESCRIPTION() macros
fprobe: add missing MODULE_DESCRIPTION() macro
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
- Detect VGA compatibility from VESA attributes (Thomas Zimmermann)
- Make I2C terminology more inclusive in smscufx and viafb (Easwar
Hariharan)
- Add lots of missing MODULE_DESCRIPTION() macros (Jeff Johnson)
- Logo code cleanups (Geert Uytterhoeven)
- Minor fixes by Chen Ni, Kuninori Morimoto, Uwe Kleine-König and
Christophe Jaillett
* tag 'fbdev-for-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (21 commits)
fbdev: viafb: Make I2C terminology more inclusive
fbdev: smscufx: Make I2C terminology more inclusive
fbdev: omap2: Return clk_prepare_enable to transfer the error
fbdev: mmp: Constify struct mmp_overlay_ops
fbdev: Drop explicit initialization of struct i2c_device_id::driver_data to 0
video: agp: add remaining missing MODULE_DESCRIPTION() macros
video: console: add missing MODULE_DESCRIPTION() macros
fbdev: amifb: add missing MODULE_DESCRIPTION() macro
fbdev: c2p_planar: add missing MODULE_DESCRIPTION() macro
fbdev: vesafb: Detect VGA compatibility from screen info's VESA attributes
fbdev: omapfb: use of_graph_get_remote_port()
fbdev: omapdss: use for_each_endpoint_of_node()
fbdev: offb: add missing MODULE_DESCRIPTION() macro
fbdev: vfb: add missing MODULE_DESCRIPTION() macro
fbdev: macmodes: add missing MODULE_DESCRIPTION() macro
fbdev: goldfishfb: add missing MODULE_DESCRIPTION() macro
fbdev: kyro: add missing MODULE_DESCRIPTION() macro
fbdev: viafb: add missing MODULE_DESCRIPTION() macro
fbdev: matroxfb: add missing MODULE_DESCRIPTION() macros
video/logo: Remove linux_serial_image comments
...
|
|
of_platform_populate()
Commit 50b040ef3732 ("PCI/pwrctl: only call of_platform_populate() if
CONFIG_OF is enabled") added the CONFIG_OF guard for the
of_platform_populate() API. But it missed the fact that the CONFIG_OF
platforms can also run on ACPI without devicetree (so dev.of_node will
be NULL). In those cases, of_platform_populate() will fail with below
error messages as seen on the Ampere Altra box:
pci 000c:00:01.0: failed to populate child OF nodes (-22)
pci 000c:00:02.0: failed to populate child OF nodes (-22)
Fix this by checking for the existence of 'dev.of_node' before calling
the of_platform_populate() API. This also warrants the removal of
CONFIG_OF check, since dev_of_node() helper will return NULL if
CONFIG_OF is not enabled.
While at it, let's also use dev_of_node() to pass device OF node pointer
to of_platform_populate().
Fixes: 50b040ef3732 ("PCI/pwrctl: only call of_platform_populate() if CONFIG_OF is enabled")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Closes: https://lore.kernel.org/linux-arm-msm/CAHk-=wjcO_9dkNf-bNda6bzykb5ZXWtAYA97p7oDsXPHmMRi6g@mail.gmail.com
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Several versions of GCC mis-compile asm goto with outputs. We try to
workaround this, but our workaround is demonstrably incomplete and
liable to result in subtle bugs, especially on arm64 where get_user()
has recently been moved over to using asm goto with outputs.
From discussion(s) with Linus at:
https://lore.kernel.org/linux-arm-kernel/Zpfv2tnlQ-gOLGac@J2N7QTR9R3.cambridge.arm.com/
https://lore.kernel.org/linux-arm-kernel/ZpfxLrJAOF2YNqCk@J2N7QTR9R3.cambridge.arm.com/
... it sounds like the best thing to do for now is to remove the
workaround and make CC_HAS_ASM_GOTO_OUTPUT depend on working compiler
versions.
The issue was originally reported to GCC by Sean Christopherson:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=113921
... and Jakub Jelinek fixed this for GCC 14, with the fix backported to
13.3.0, 12.4.0, and 11.5.0.
In the kernel, we tried to workaround broken compilers in commits:
4356e9f841f7 ("work around gcc bugs with 'asm goto' with outputs")
68fb3ca0e408 ("update workarounds for gcc "asm goto" issue")
... but the workaround of adding an empty asm("") after the asm volatile
goto(...) demonstrably does not always avoid the problem, as can be seen
in the following test case:
| #define asm_goto_output(x...) \
| do { asm volatile goto(x); asm (""); } while (0)
|
| #define __good_or_bad(__val, __key) \
| do { \
| __label__ __failed; \
| unsigned long __tmp; \
| asm_goto_output( \
| " cbnz %[key], %l[__failed]\n" \
| " mov %[val], #0x900d\n" \
| : [val] "=r" (__tmp) \
| : [key] "r" (__key) \
| : \
| : __failed); \
| (__val) = __tmp; \
| break; \
| __failed: \
| (__val) = 0xbad; \
| } while (0)
|
| unsigned long get_val(unsigned long key);
| unsigned long get_val(unsigned long key)
| {
| unsigned long val = 0xbad;
|
| __good_or_bad(val, key);
|
| return val;
| }
GCC 13.2.0 (at -O2) compiles this to:
| cbnz x0, .Lfailed
| mov x0, #0x900d
| .Lfailed:
| ret
GCC 14.1.0 (at -O2) compiles this to:
| cbnz x0, .Lfailed
| mov x0, #0x900d
| ret
| .Lfailed:
| mov x0, #0xbad
| ret
Note that GCC 13.2.0 erroneously omits the assignment to 'val' in the
error path (even though this does not depend on an output of the asm
goto). GCC 14.1.0 correctly retains the assignment.
This problem can be seen within the kernel with the following test case:
| #include <linux/uaccess.h>
| #include <linux/types.h>
|
| noinline unsigned long test_unsafe_get_user(unsigned long __user *ptr);
| noinline unsigned long test_unsafe_get_user(unsigned long __user *ptr)
| {
| unsigned long val;
|
| unsafe_get_user(val, ptr, Efault);
| return val;
|
| Efault:
| val = 0x900d;
| return val;
| }
GCC 13.2.0 (arm64 defconfig) compiles this to:
| and x0, x0, #0xff7fffffffffffff
| ldtr x0, [x0]
| .Lextable_fixup:
| ret
GCC 13.2.0 (x86_64 defconfig + MITIGATION_RETPOLINE=n) compiles this to:
| endbr64
| mov (%rdi),%rax
| .Lextable_fixup:
| ret
... omitting the assignment to 'val' in the error path, and leaving
garbage in the result register returned by the function (which happens
to contain the faulting address in the generated code).
GCC 14.1.0 (arm64 defconfig) compiles this to:
| and x0, x0, #0xff7fffffffffffff
| ldtr x0, [x0]
| ret
| .Lextable_fixup:
| mov x0, #0x900d // #36877
| ret
GCC 14.1.0 (x86_64 defconfig + MITIGATION_RETPOLINE=n) compiles this to:
| endbr64
| mov (%rdi),%rax
| ret
| .Lextable_fixup:
| mov $0x900d,%eax
| ret
... retaining the expected assignment to 'val' in the error path.
We don't have a complete and reasonable workaround. While placing empty
asm("") blocks after each goto label *might* be sufficient, we don't
know for certain, this is tedious and error-prone, and there doesn't
seem to be a neat way to wrap this up (which is especially painful for
cases with multiple goto labels).
Avoid this issue by disabling CONFIG_CC_HAS_ASM_GOTO_OUTPUT for
known-broken compiler versions and removing the workaround (along with
the CONFIG_GCC_ASM_GOTO_OUTPUT_WORKAROUND config option).
For the moment I've left the default implementation of asm_goto_output()
unchanged. This should now be redundant since any compiler with the fix
for the clobbering issue whould also have a fix for the (earlier)
volatile issue, but it's far less churny to leave it around, which makes
it easier to backport this patch if necessary.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alex Coplan <alex.coplan@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Jakub Jelinek <jakub@gcc.gnu.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Szabolcs Nagy <szabolcs.nagy@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit fbb5c0606fa4 ("kbuild: add syscall table generation to
scripts/Makefile.asm-headers") started to generate syscall headers
for architectures using generic syscalls.
However, these headers are always rebuilt using GNU Make 4.4.1 or newer.
When using GNU Make 4.4 or older, these headers are not rebuilt when the
command to generate them is changed, despite the use of the if_changed
macro.
scripts/Makefile.asm-headers now uses FORCE, but it is not marked as
.PHONY. To handle the command line change correctly, .*.cmd files must
be included.
Fixes: fbb5c0606fa4 ("kbuild: add syscall table generation to scripts/Makefile.asm-headers")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Closes: https://lore.kernel.org/lkml/CAHk-=wibB7SvXnUftBgAt+4-3vEKRpvEgBeDEH=i=j2GvDitoA@mail.gmail.com/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull drm updates from Dave Airlie:
"There's a lot of stuff in here, amd, i915 and xe have new platform
work, lots of core rework around EDID handling, some new COMPILE_TEST
options, maintainer changes and a lots of other stuff. Summary:
core:
- deprecate DRM data and return 0 date
- connector: Create a set of helpers to help with HDMI support
- Remove driver owner assignments
- Allow more drivers to compile with COMPILE_TEST
- Conversions to drm_edid
- Sprinkle MODULE_DESCRIPTIONS everywhere they are missing
- Remove drm_mm_replace_node
- print: Add a drm prefix to warn level messages too, remove
___drm_dbg, consolidate prefix handling
- New monochrome TV mode variant
ttm:
- improve number of page faults on some platforms
- fix test builds under PREEMPT_RT
- more test coverage
ci:
- Require a more recent version of mesa
- improve farm setup and test generation
dma-buf:
- warn if reserving 0 fence slots
- internal API heap enhancements
fbdev:
- Create memory manager optimized fbdev emulation
panic:
- Allow to select fonts
- improve drm_fb_dma_get_scanout_buffer
- Allow to dump kmsg to the screen
bridge:
- Remove redundant checks on bridge->encoder
- Remove drm_bridge_chain_mode_fixup
- bridge-connector: Plumb in the new HDMI helper
- analogix_dp: Various improvements, handle AUX transfers timeout
- samsung-dsim: Fix timings calculation
- tc358767: Plenty of small fixes, fix no connector attach, fix
clocks
- sii902x: state validation improvements
panels:
- Switch panels from register table initialization to proper code
- Now that the panel code tracks the panel state, remove every ad-hoc
implementation in the panel drivers
- More cleanup of prepare / enable state tracking in drivers
- edp: Drop legacy panel compatibles
- simple-bridge: Switch to devm_drm_bridge_add
- New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology
13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0,
BOE nv110wum-l60, IVO t109nw41, WL-355608-A8, PrimeView
PM070WL4, Lincoln Technologies LCD197, Ortustech
COM35H3P70ULC, AUO G104STN01, K&d kd101ne3-40ti
amdgpu:
- DCN 4.0.x support
- GC 12.0 support
- GMC 12.0 support
- SDMA 7.0 support
- MES12 support
- MMHUB 4.1 support
- GFX12 modifier and DCC support
- lots of IP fixes/updates
amdkfd:
- Contiguous VRAM allocations
- GC 12.0 support
- SDMA 7.0 support
- SR-IOV fixes
- KFD GFX ALU exceptions
i915:
- Battlemage Xe2 HPD display enablement
- Panel Replay enabling
- DP AUX-less ALPM/LOBF
- Enable link training failure fallback for DP MST links
- CMRR (Content Match Refresh Rate) enabling
- Increase ADL-S/ADL-P/DG2+ max TMDS bitrate to 6 Gbps
- Enable eDP AUX based HDR backlight
- Support replaying GPU hangs with captured context image
- Automate CCS Mode setting during engine resets
- lots of refactoring
- Support replaying GPU hangs with captured context image
- Increase FLR timeout from 3s to 9s
- Enable w/a 16021333562 for DG2, MTL and ARL [guc]
xe:
- update MAINATINERS
- New uapi adding OA functionality to Xe
- expose l3 bank mask
- fix display detect on ADL-N
- runtime PM Fixes
- Fix silent backmerge issues
- More prep for SR-IOV
- HWmon additions
- per client usage info
- Rework GPU page fault handling
- Drop EXEC_QUEUE_FLAG_BANNED
- Add BMG PCI IDs
- Scheduler fixes and improvements
- Rename xe_exec_queue::compute to xe_exec_queue::lr
- Use ttm_uncached for BO with NEEDS_UC flag
- Rename xe perf layer as xe observation layer
- lots of refactoring
radeon:
- Backlight workaround for iMac
- Silence UBSAN flex array warnings
msm:
- Validate registers XML description against schema in CI
- core/dpu: SM7150 support
- mdp5: Add support for MSM8937
- gpu: Add param for userspace to know if raytracing is supported
- gpu: X185 support (aka gpu in X1 laptop chips)
- gpu: a505 support
ivpu:
- hardware scheduler support
- profiling support
- improvements to the platform support layer
- firmware handling improvements
- clocks/power mgmt improvements
- scheduler/logging improvements
habanalabs:
- Gradual sleep in polling memory macro
- Reduce Gaudi2 MSI-X interrupt count to 128
- Add Gaudi2-D revision support
- Add timestamp to CPLD info
- Gaudi2: Assume hard-reset by firmware upon MC SEI severe error
- Align Gaudi2 interrupt names
- Check for errors after preboot is ready
- Change habanalabs maintainer and git repo path
mgag200:
- refactoring and improvements
- Add BMC output
- enable polling
nouveau:
- add registry command line
v3d:
- perf counters improvements
zynqmp:
- irq and debugfs improvements
atmel-hlcdc:
- Support XLCDC in sam9x7
mipi-dbi:
- Remove mipi_dbi_machine_little_endian
- make SPI bits per word configurable
- support RGB888
- allow pixel formats to be specified in the DT
sun4i:
- Rework the blender setup for DE2
panfrost:
- Enable MT8188 support
vc4:
- Monochrome TV support
exynos:
- fix fallback mode regression
- fix memory leak
- Use drm_edid_duplicate() instead of kmemdup()
etnaviv:
- fix i.MX8MP NPU clock gating
- workaround FE register cdc issues on some cores
- fix DMA sync handling for cached buffers
- fix job timeout handling
- keep TS enabled on MMUv2 cores for improved performance
mediatek:
- Convert to platform remove callback returning void-
- Drop chain_mode_fixup call in mode_valid()
- Fixes the errors of MediaTek display driver found by IGT
- Add display support for the MT8365-EVK board
- Fix bit depth overwritten for mtk_ovl_set bit_depth()
- Fix possible_crtcs calculation
- Fix spurious kfree()
ast:
- refactor mode setting code
stm:
- Add LVDS support
- DSI PHY updates"
* tag 'drm-next-2024-07-18' of https://gitlab.freedesktop.org/drm/kernel: (2501 commits)
drm/amdgpu/mes12: add missing opcode string
drm/amdgpu/mes11: update opcode strings
Revert "drm/amd/display: Reset freesync config before update new state"
drm/omap: Restrict compile testing to PAGE_SIZE less than 64KB
drm/xe: Drop trace_xe_hw_fence_free
drm/xe/uapi: Rename xe perf layer as xe observation layer
drm/amdgpu: remove exp hw support check for gfx12
drm/amdgpu: timely save bad pages to eeprom after gpu ras reset is completed
drm/amdgpu: flush all cached ras bad pages to eeprom
drm/amdgpu: select compute ME engines dynamically
drm/amd/display: Allow display DCC for DCN401
drm/amdgpu: select compute ME engines dynamically
drm/amdgpu/job: Replace DRM_INFO/ERROR logging
drm/amdgpu: select compute ME engines dynamically
drm/amd/pm: Ignore initial value in smu response register
drm/amdgpu: Initialize VF partition mode
drm/amd/amdgpu: fix SDMA IRQ client ID <-> req mapping
MAINTAINERS: fix Xinhui's name
MAINTAINERS: update powerplay and swsmu
drm/qxl: Pin buffer objects for internal mappings
...
|
|
The GSS routine errors are values, not flags.
Fixes: 0c77668ddb4e ("SUNRPC: Introduce trace points in rpc_auth_gss.ko")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
We've observed NFS clients with sync tasks sleeping in __rpc_execute
waiting on RPC_TASK_QUEUED that have not responded to a wake-up from
rpc_make_runnable(). I suspect this problem usually goes unnoticed,
because on a busy client the task will eventually be re-awoken by another
task completion or xprt event. However, if the state manager is draining
the slot table, a sync task missing a wake-up can result in a hung client.
We've been able to prove that the waker in rpc_make_runnable() successfully
calls wake_up_bit() (ie- there's no race to tk_runstate), but the
wake_up_bit() call fails to wake the waiter. I suspect the waker is
missing the load of the bit's wait_queue_head, so waitqueue_active() is
false. There are some very helpful comments about this problem above
wake_up_bit(), prepare_to_wait(), and waitqueue_active().
Fix this by inserting smp_mb__after_atomic() before the wake_up_bit(),
which pairs with prepare_to_wait() calling set_current_state().
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Drivers report a string with a name for each PCM, log it during startup of
pcm-test as a diagnostic aid.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20240716-alsa-kselftest-board-name-v2-2-60f1acdde096@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Currently for the PCM and mixer tests we report test names which identify
the card being tested with the card number. This ensures we have unique
names but since card numbers are dynamically assigned at runtime the names
we end up with will often not be stable on systems with multiple cards
especially where those cards are provided by separate modules loeaded at
runtime. This makes it difficult for automated systems and UIs to relate
test results between runs on affected platforms.
Address this by replacing our use of card numbers with card names which are
more likely to be stable across runs. We use the card ID since it is
guaranteed to be unique by default, unlike the long name. There is still
some vulnerability to ordering issues if multiple cards with the same base
ID are present in the system but have separate dependencies but not all
drivers put distinguishing information in their long names.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20240716-alsa-kselftest-board-name-v2-1-60f1acdde096@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Samsung Galaxy Book Pro 360 (13" 2022 NT935QDB-KC71S) with codec SSID
144d:c1a4 requires the same workaround to enable the speaker amp
as other Samsung models with the ALC298 codec.
Signed-off-by: Seunghun Han <kkamagui@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240718080908.8677-1-kkamagui@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
