| Age | Commit message (Collapse) | Author |
|---|
|
For reasons that entirely elude me fb.h exposes all the structures,
even when it is not enabled. Except for special stuff like fb_defio.
Which means all the drivers which haven't yet switched over to the
defio support in the helpers and still roll their own, will fail
to compile when fbdev emulation is disabled. Protect just those
bits, as a gnarly reminder that conversion to the core defio helpers
would be good.
Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1470847958-28465-6-git-send-email-daniel.vetter@ffwll.ch
|
|
Seems to at least compile fine, only change needed was to use
the fb_set_suspend helper.
Cc: alexander.deucher@amd.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1470847958-28465-5-git-send-email-daniel.vetter@ffwll.ch
|
|
vmwgfx doesn't actually build without that.
It would be great if vmwgfx could switch over to the fbdev emulation
helpers, since those will take care of all this already. I guess one
reason to not do that was lack of defio support in the helpers, but
that's fixed now. If there's any other hold-up, we should figure out
what it is and whether it makes sense to address it.
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470847958-28465-4-git-send-email-daniel.vetter@ffwll.ch
|
|
Everyone who uses the fbdev emulation helpers doesn't need to include
fb.h directly. Remove it.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1470847958-28465-3-git-send-email-daniel.vetter@ffwll.ch
|
|
Lots of drivers don't properly compile without this when CONFIG_FB=n.
It's kinda a hack, but since CONFIG_FB doesn't stub any fucntions when
it's disabled I think it makes sense to add it to drm_fb_helper.h.
Long term we probably need to rethink all the logic to unload firmware
framebuffer drivers, at least if we want to be able to move away from
CONFIG_FB and fbcon.
v2: Unfortunately just stubbing out remove_conflicting_framebuffers in
drm_fb_helper.h upset gcc about static vs. non-static declarations, so
a new wrapper it needs to be. Means more churn :(
Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: tomi.valkeinen@ti.com
Cc: dh.herrmann@gmail.com
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470847958-28465-2-git-send-email-daniel.vetter@ffwll.ch
|
|
When triggering KVM_RUN without a user memory region being mapped
(KVM_SET_USER_MEMORY_REGION) a validity intercept occurs. This could
happen, if the user memory region was not mapped initially or if it
was unmapped after the vcpu is initialized. The function
kvm_s390_handle_requests checks for the KVM_REQ_MMU_RELOAD bit. The
check function always clears this bit. If gmap_mprotect_notify
returns an error code, the mapping failed, but the KVM_REQ_MMU_RELOAD
was not set anymore. So the next time kvm_s390_handle_requests is
called, the execution would fall trough the check for
KVM_REQ_MMU_RELOAD. The bit needs to be resetted, if
gmap_mprotect_notify returns an error code. Resetting the bit with
kvm_make_request(KVM_REQ_MMU_RELOAD, vcpu) fixes the bug.
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Julius Niedworok <jniedwor@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
When KVM_RUN is triggered on a VCPU without an initial reset, a
validity intercept occurs.
Setting the prefix will set the KVM_REQ_MMU_RELOAD bit initially,
thus preventing the bug.
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Julius Niedworok <jniedwor@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
There are bug reports about miscounting uncore counters on some
client machines like Sandybridge, Broadwell and Skylake. It is
very likely to be observed on idle systems.
This issue is caused by a hardware issue. PERF_GLOBAL_CTL could be
cleared after Package C7, and nothing will be count.
The related errata (HSD 158) could be found in:
www.intel.com/content/dam/www/public/us/en/documents/specification-updates/4th-gen-core-family-desktop-specification-update.pdf
This patch tries to work around this issue by re-enabling PERF_GLOBAL_CTL
in ->enable_box(). The workaround does not cover all cases. It helps for new
events after returning from C7. But it cannot prevent C7, it will still
miscount if a counter is already active.
There is no drawback in leaving it enabled, so it does not need
disable_box() here.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: <stable@vger.kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1470925874-59943-1-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Some uncore boxes' num_counters value for Haswell server and
Broadwell server are not correct (too large, off by one).
This issue was found by comparing the code with the document. Although
there is no bug report from users yet, accessing non-existent counters
is dangerous and the behavior is undefined: it may cause miscounting or
even crashes.
This patch makes them consistent with the uncore document.
Reported-by: Lukasz Odzioba <lukasz.odzioba@intel.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/1470925820-59847-1-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Since instruction decoder now supports EVEX-encoded instructions, two fixes
are needed to correctly handle them in uprobes.
Extended bits for MODRM.rm field need to be sanitized just like we do it
for VEX3, to avoid encoding wrong register for register-relative access.
EVEX has _two_ extended bits: b and x. Theoretically, EVEX.x should be
ignored by the CPU (since GPRs go only up to 15, not 31), but let's be
paranoid here: proper encoding for register-relative access
should have EVEX.x = 1.
Secondly, we should fetch vex.vvvv for EVEX too.
This is now super easy because instruction decoder populates
vex_prefix.bytes[2] for all flavors of (e)vex encodings, even for VEX2.
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Cc: <stable@vger.kernel.org> # v4.1+
Fixes: 8a764a875fe3 ("x86/asm/decoder: Create artificial 3rd byte for 2-byte VEX")
Link: http://lkml.kernel.org/r/20160811154521.20469-1-dvlasenk@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Merge fixes from Andrew Morton:
"7 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/memory_hotplug.c: initialize per_cpu_nodestats for hotadded pgdats
mm, oom: fix uninitialized ret in task_will_free_mem()
kasan: remove the unnecessary WARN_ONCE from quarantine.c
mm: memcontrol: fix memcg id ref counter on swap charge move
mm: memcontrol: fix swap counter leak on swapout from offline cgroup
proc, meminfo: use correct helpers for calculating LRU sizes in meminfo
mm/hugetlb: fix incorrect hugepages count during mem hotplug
|
|
The following oops occurs after a pgdat is hotadded:
Unable to handle kernel paging request for data at address 0x00c30001
Faulting instruction address: 0xc00000000022f8f4
Oops: Kernel access of bad area, sig: 11 [#1]
SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw iptable_filter nls_utf8 isofs sg virtio_balloon uio_pdrv_genirq uio ip_tables xfs libcrc32c sr_mod cdrom sd_mod virtio_net ibmvscsi scsi_transport_srp virtio_pci virtio_ring virtio dm_mirror dm_region_hash dm_log dm_mod
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 4.8.0-rc1-device #110
task: c000000000ef3080 task.stack: c000000000f6c000
NIP: c00000000022f8f4 LR: c00000000022f948 CTR: 0000000000000000
REGS: c000000000f6fa50 TRAP: 0300 Tainted: G W (4.8.0-rc1-device)
MSR: 800000010280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 84002028 XER: 20000000
CFAR: d000000001d2013c DAR: 0000000000c30001 DSISR: 40000000 SOFTE: 0
NIP refresh_cpu_vm_stats+0x1a4/0x2f0
LR refresh_cpu_vm_stats+0x1f8/0x2f0
Call Trace:
refresh_cpu_vm_stats+0x1f8/0x2f0 (unreliable)
Add per_cpu_nodestats initialization to the hotplug codepath.
Link: http://lkml.kernel.org/r/1470931473-7090-1-git-send-email-arbab@linux.vnet.ibm.com
Signed-off-by: Reza Arbab <arbab@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
mm/oom_kill.c: In function `task_will_free_mem':
mm/oom_kill.c:767: warning: `ret' may be used uninitialized in this function
If __task_will_free_mem() is never called inside the for_each_process()
loop, ret will not be initialized.
Fixes: 1af8bb43269563e4 ("mm, oom: fortify task_will_free_mem()")
Link: http://lkml.kernel.org/r/1470255599-24841-1-git-send-email-geert@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It's quite unlikely that the user will so little memory that the per-CPU
quarantines won't fit into the given fraction of the available memory.
Even in that case he won't be able to do anything with the information
given in the warning.
Link: http://lkml.kernel.org/r/1470929182-101413-1-git-send-email-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Konovalov <adech.fo@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kuthonuzo Luruo <kuthonuzo.luruo@hpe.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Since commit 73f576c04b94 ("mm: memcontrol: fix cgroup creation failure
after many small jobs") swap entries do not pin memcg->css.refcnt
directly. Instead, they pin memcg->id.ref. So we should adjust the
reference counters accordingly when moving swap charges between cgroups.
Fixes: 73f576c04b941 ("mm: memcontrol: fix cgroup creation failure after many small jobs")
Link: http://lkml.kernel.org/r/9ce297c64954a42dc90b543bc76106c4a94f07e8.1470219853.git.vdavydov@virtuozzo.com
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org> [3.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
An offline memory cgroup might have anonymous memory or shmem left
charged to it and no swap. Since only swap entries pin the id of an
offline cgroup, such a cgroup will have no id and so an attempt to
swapout its anon/shmem will not store memory cgroup info in the swap
cgroup map. As a result, memcg->swap or memcg->memsw will never get
uncharged from it and any of its ascendants.
Fix this by always charging swapout to the first ancestor cgroup that
hasn't released its id yet.
[hannes@cmpxchg.org: add comment to mem_cgroup_swapout]
[vdavydov@virtuozzo.com: use WARN_ON_ONCE() in mem_cgroup_id_get_online()]
Link: http://lkml.kernel.org/r/20160803123445.GJ13263@esperanza
Fixes: 73f576c04b941 ("mm: memcontrol: fix cgroup creation failure after many small jobs")
Link: http://lkml.kernel.org/r/5336daa5c9a32e776067773d9da655d2dc126491.1470219853.git.vdavydov@virtuozzo.com
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org> [3.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
meminfo_proc_show() and si_mem_available() are using the wrong helpers
for calculating the size of the LRUs. The user-visible impact is that
there appears to be an abnormally high number of unevictable pages.
Link: http://lkml.kernel.org/r/20160805105805.GR2799@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
When memory hotplug operates, free hugepages will be freed if the
movable node is offline. Therefore, /proc/sys/vm/nr_hugepages will be
incorrect.
Fix it by reducing max_huge_pages when the node is offlined.
n-horiguchi@ah.jp.nec.com said:
: dissolve_free_huge_page intends to break a hugepage into buddy, and the
: destination hugepage is supposed to be allocated from the pool of the
: destination node, so the system-wide pool size is reduced. So adding
: h->max_huge_pages-- makes sense to me.
Link: http://lkml.kernel.org/r/1470624546-902-1-git-send-email-zhongjiang@huawei.com
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"A couple of bug fixes have come in for v4.8 so far. Since the first
few were originally meant to go into -rc1 (but didn't get sent in time
for travel reasons), the branch is unfortunately based on top of a
commit in the middle of the merge window rather than -rc1.
Content-wise we have:
- a fix for the last remaining broken build in kernelci, getting
mach-shmobile to build again with SMP disabled
- a fix for a realview regression that broke real hardware but not
the qemu model that everyone uses in practice (needed for v4.7 as
well)
- a merge conflict fix for Tegra that also broke v4.7
- two Kconfig fixes for arm64 build regressions
- a couple of arm32 build warning fixes (all harmless)
- fix the RTC on Exynos7 Espresso (which apparently never worked
right)"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
Merge tag 'pxa-fixes-v4.8' of https://github.com/rjarzmik/linux into randconfig-4.8
arm64: Kconfig: select HISILICON_IRQ_MBIGEN only if PCI is selected
arm64: Kconfig: select ALPINE_MSI only if PCI is selected
ARM: dts: realview: Fix PBX-A9 cache description
ARM: tegra: fix erroneous address in dts
ARM: dts: add syscon compatible string for AP syscon
ARM: dts: add syscon compatible string for CP syscon
ARM: oxnas: select reset controller framework
ARM: hide mach-*/ include for ARM_SINGLE_ARMV7M
ARM: don't include removed directories
Revert "ARM: aspeed: adapt defconfigs for new CONFIG_PRINTK_TIME"
ARM: shmobile: don't call platform_can_secondary_boot on UP
MAINTAINER: alpine: add a mailing list
ARM: do away with final ARCH_REQUIRE_GPIOLIB
arm64: dts: Fix RTC by providing rtc_src clock
|
|
Pull virtio/vhost fixes and cleanups from Michael Tsirkin:
"Misc fixes and cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio/s390: deprecate old transport
virtio/s390: keep early_put_chars
virtio_blk: Fix a slient kernel panic
virtio-vsock: fix include guard typo
vhost/vsock: fix vhost virtio_vsock_pkt use-after-free
9p/trans_virtio: use kvfree() for iov_iter_get_pages_alloc()
virtio: fix error handling for debug builds
virtio: fix memory leak in virtqueue_add()
|
|
Pull ceph fixes from Ilya Dryomov:
"A patch for a NULL dereference bug introduced in 4.8-rc1 and a handful
of static checker fixes"
* tag 'ceph-for-4.8-rc2' of https://github.com/ceph/ceph-client:
ceph: initialize pathbase in the !dentry case in encode_caps_cb()
rbd: nuke the 32-bit pool id check
rbd: destroy header_oloc in rbd_dev_release()
ceph: fix null pointer dereference in ceph_flush_snaps()
libceph: using kfree_rcu() to simplify the code
libceph: make cancel_generic_request() static
libceph: fix return value check in alloc_msg_with_page_vector()
|
|
When running LTP's nfslock01 test, the Linux client can send a LOCK
and a FREE_STATEID request at the same time. The outcome is:
Frame 324 R OPEN stateid [2,O]
Frame 115004 C LOCK lockowner_is_new stateid [2,O] offset 672000 len 64
Frame 115008 R LOCK stateid [1,L]
Frame 115012 C WRITE stateid [0,L] offset 672000 len 64
Frame 115016 R WRITE NFS4_OK
Frame 115019 C LOCKU stateid [1,L] offset 672000 len 64
Frame 115022 R LOCKU NFS4_OK
Frame 115025 C FREE_STATEID stateid [2,L]
Frame 115026 C LOCK lockowner_is_new stateid [2,O] offset 672128 len 64
Frame 115029 R FREE_STATEID NFS4_OK
Frame 115030 R LOCK stateid [3,L]
Frame 115034 C WRITE stateid [0,L] offset 672128 len 64
Frame 115038 R WRITE NFS4ERR_BAD_STATEID
In other words, the server returns stateid L in a successful LOCK
reply, but it has already released it. Subsequent uses of stateid L
fail.
To address this, protect the generation check in nfsd4_free_stateid
with the st_mutex. This should guarantee that only one of two
outcomes occurs: either LOCK returns a fresh valid stateid, or
FREE_STATEID returns NFS4ERR_LOCKS_HELD.
Reported-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Fix-suggested-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Because the arm64 calling standard allows stacked function arguments to be
anywhere in the stack frame, do not attempt to duplicate the stack frame for
jprobes handler functions.
Documentation changes to describe this issue have been broken out into a
separate patch in order to simultaneously address them in other
architecture(s).
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
b44061d0b9 introduced a dentry ref counting bug. Previously we were
grabbing one ref to dchild in nfsd_create(), but with the creation of
nfsd_create_locked() we have a ref for dchild from the lookup in
nfsd_create(), and then another ref in nfsd_create_locked(). The ref
from the lookup in nfsd_create() is never dropped and results in
dentries still in use at unmount.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Fixes: b44061d0b9 "nfsd: reorganize nfsd_create"
Reported-by: kernel test robot <xiaolong.ye@intel.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
|
|
Due to the (indirect) nesting of min(..., min(...)), sparse will
show a variable shadowing warning whenever bvec.h is included.
Avoid that by assigning the inner min() to a temporary variable first.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
Add descriptions for dax, io_poll, and write_same_max_bytes files.
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
When nvme_delete_queue fails in the first pass of the
nvme_disable_io_queues() loop, we return early, failing to suspend all
of the IO queues. Later, on the nvme_pci_disable path, this causes us
to disable MSI without actually having freed all the IRQs, which
triggers the BUG_ON in free_msi_irqs(), as show below.
This patch refactors nvme_disable_io_queues to suspend all queues before
start submitting delete queue commands. This way, we ensure that we
have at least returned every IRQ before continuing with the removal
path.
[ 487.529200] kernel BUG at ../drivers/pci/msi.c:368!
cpu 0x46: Vector: 700 (Program Check) at [c0000078c5b83650]
pc: c000000000627a50: free_msi_irqs+0x90/0x200
lr: c000000000627a40: free_msi_irqs+0x80/0x200
sp: c0000078c5b838d0
msr: 9000000100029033
current = 0xc0000078c5b40000
paca = 0xc000000002bd7600 softe: 0 irq_happened: 0x01
pid = 1376, comm = kworker/70:1H
kernel BUG at ../drivers/pci/msi.c:368!
Linux version 4.7.0.mainline+ (root@iod76) (gcc version 5.3.1 20160413
(Ubuntu/IBM 5.3.1-14ubuntu2.1) ) #104 SMP Fri Jul 29 09:20:17 CDT 2016
enter ? for help
[c0000078c5b83920] d0000000363b0cd8 nvme_dev_disable+0x208/0x4f0 [nvme]
[c0000078c5b83a10] d0000000363b12a4 nvme_timeout+0xe4/0x250 [nvme]
[c0000078c5b83ad0] c0000000005690e4 blk_mq_rq_timed_out+0x64/0x110
[c0000078c5b83b40] c00000000056c930 bt_for_each+0x160/0x170
[c0000078c5b83bb0] c00000000056d928 blk_mq_queue_tag_busy_iter+0x78/0x110
[c0000078c5b83c00] c0000000005675d8 blk_mq_timeout_work+0xd8/0x1b0
[c0000078c5b83c50] c0000000000e8cf0 process_one_work+0x1e0/0x590
[c0000078c5b83ce0] c0000000000e9148 worker_thread+0xa8/0x660
[c0000078c5b83d80] c0000000000f2090 kthread+0x110/0x130
[c0000078c5b83e30] c0000000000095f0 ret_from_kernel_thread+0x5c/0x6c
Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Cc: Brian King <brking@linux.vnet.ibm.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: linux-nvme@lists.infradead.org
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
I made a mistake while converting the driver to the hotplug state
machine and as a result x2apic_cluster_probe() was accessing
cpus_in_cluster before allocating it.
This patch fixes it by setting the cpumask after the allocation the
memory succeeded.
While at it, I marked two functions static which are only used within
this file.
Reported-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 6b2c28471de5 ("x86/x2apic: Convert to CPU hotplug state machine")
Link: http://lkml.kernel.org/r/1470924515-9444-1-git-send-email-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Commit:
f9bcf1e0e014 ("sched/cputime: Fix steal time accounting")
... fixes a leak on steal time accounting but forgets to account
the ticks passed in parameters, assuming there is only one to
take into account.
Let's consider that parameter back.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Wanpeng Li <kernellwp@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim <rkrcmar@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: linux-tip-commits@vger.kernel.org
Link: http://lkml.kernel.org/r/20160811125822.GB4214@lerouge
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
According to UEFI 2.6 section 7.5.3, the capsule should be in contiguous
virtual memory and firmware may consume the capsule immediately. To
correctly implement this functionality, the kernel driver needs to vmap
the entire capsule at the time it is made available to firmware.
The virtual allocation of the capsule update has been changed from kmap,
which was only allocating the first page of the update, to vmap, and
allocates the entire data payload.
Signed-off-by: Austin Christ <austinwc@codeaurora.org>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Reviewed-by: Lee, Chun-Yi <jlee@suse.com>
Cc: <stable@vger.kernel.org> # v4.7
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kweh Hock Leong <hock.leong.kweh@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1470912120-22831-3-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
efi_runtime_disabled case
This problem has actually been in the UV code for a while, but we didn't
catch it until recently, because we had been relying on EFI_OLD_MEMMAP
to allow our systems to boot for a period of time. We noticed the issue
when trying to kexec a recent community kernel, where we hit this NULL
pointer dereference in efi_sync_low_kernel_mappings():
[ 0.337515] BUG: unable to handle kernel NULL pointer dereference at 0000000000000880
[ 0.346276] IP: [<ffffffff8105df8d>] efi_sync_low_kernel_mappings+0x5d/0x1b0
The problem doesn't show up with EFI_OLD_MEMMAP because we skip the
chunk of setup_efi_state() that sets the efi_loader_signature for the
kexec'd kernel. When the kexec'd kernel boots, it won't set EFI_BOOT in
setup_arch, so we completely avoid the bug.
We always kexec with noefi on the command line, so this shouldn't be an
issue, but since we're not actually checking for efi_runtime_disabled in
uv_bios_init(), we end up trying to do EFI runtime callbacks when we
shouldn't be. This patch just adds a check for efi_runtime_disabled in
uv_bios_init() so that we don't map in uv_systab when runtime_disabled ==
true.
Signed-off-by: Alex Thorlton <athorlton@sgi.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: <stable@vger.kernel.org> # v4.7
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Travis <travis@sgi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russ Anderson <rja@sgi.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1470912120-22831-2-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
On my Dell XPS 13 9350 with firmware 1.4.4 and SGX on, if I boot
Fedora 24's grub2-efi off a hard disk, my first 1MB of RAM looks
like:
efi: mem00: [Runtime Data |RUN| | | | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000000fff] (0MB)
efi: mem01: [Boot Data | | | | | | | | |WB|WT|WC|UC] range=[0x0000000000001000-0x0000000000027fff] (0MB)
efi: mem02: [Loader Data | | | | | | | | |WB|WT|WC|UC] range=[0x0000000000028000-0x0000000000029fff] (0MB)
efi: mem03: [Reserved | | | | | | | | |WB|WT|WC|UC] range=[0x000000000002a000-0x000000000002bfff] (0MB)
efi: mem04: [Runtime Data |RUN| | | | | | | |WB|WT|WC|UC] range=[0x000000000002c000-0x000000000002cfff] (0MB)
efi: mem05: [Loader Data | | | | | | | | |WB|WT|WC|UC] range=[0x000000000002d000-0x000000000002dfff] (0MB)
efi: mem06: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x000000000002e000-0x0000000000057fff] (0MB)
efi: mem07: [Reserved | | | | | | | | |WB|WT|WC|UC] range=[0x0000000000058000-0x0000000000058fff] (0MB)
efi: mem08: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x0000000000059000-0x000000000009ffff] (0MB)
My EBDA is at 0x2c000, which blocks off everything from 0x2c000 and
up, and my trampoline is 0x6000 bytes (6 pages), so it doesn't fit
in the loader data range at 0x28000.
Without this patch, it panics due to a failure to allocate the
trampoline. With this patch, it works:
[ +0.001744] Base memory trampoline at [ffff880000001000] 1000 size 24576
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mario Limonciello <mario_limonciello@dell.com>
Cc: Matt Fleming <mfleming@suse.de>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/998c77b3bf709f3dfed85cb30701ed1a5d8a438b.1470821230.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signalling doesn't need to be enabled at sync_file creation, it is only
required if userspace waiting the fence to signal through poll().
Thus we delay fence_add_callback() until poll is called. It only adds the
callback the first time poll() is called. This avoid re-adding the same
callback multiple times.
v2: rebase and update to work with new fence support for sync_file
v3: use atomic operation to set enabled and protect fence_add_callback()
v4: use user bit from fence flags (comment from Chris Wilson)
v5: use ternary if on poll return (comment from Chris Wilson)
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
[sumits: remove unused var status]
Link: http://patchwork.freedesktop.org/patch/msgid/1470404378-27961-1-git-send-email-gustavo@padovan.org
|
|
Document the new function added to sync_file.c
v2: Adapt to fence_array
v3: Take in Chris Wilson suggestions
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
|
|
Creates a function that given an sync file descriptor returns a
fence containing all fences in the sync_file.
v2: Comments by Daniel Vetter
- Adapt to new version of fence_collection_init()
- Hold a reference for the fence we return
v3:
- Adapt to use fput() directly
- rename to sync_file_get_fence() as we always return one fence
v4: Adapt to use fence_array
v5: set fence through fence_get()
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
|
|
Create sync_file->fence to abstract the type of fence we are using for
each sync_file. If only one fence is present we use a normal struct fence
but if there is more fences to be added to the sync_file a fence_array
is created.
This change cleans up sync_file a bit. We don't need to have sync_file_cb
array anymore. Instead, as we always have one fence, only one fence
callback is registered per sync_file.
v2: Comments from Chris Wilson and Christian König
- Not using fence_ops anymore
- fence_is_array() was created to differentiate fence from fence_array
- fence_array_teardown() is now exported and used under fence_is_array()
- struct sync_file lost num_fences member
v3: Comments from Chris Wilson and Christian König
- struct sync_file lost status member in favor of fence_is_signaled()
- drop use of fence_array_teardown()
- use sizeof(*fence) to allocate only an array on fence pointers
v4: Comments from Chris Wilson
- use sizeof(*fence) to reallocate array
- fix typo in comments
- protect num_fences sum against overflows
- use array->base instead of casting the to struct fence
v5: fixes checkpatch warnings
v6: fix case where all fences are signaled.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
|
|
Add helper to check if fence is array.
v2: Comments from Chris Wilson
- remove ternary if from ops comparison
- add EXPORT_SYMBOL(fence_array_ops)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
|
|
Add support to attach a drm_bridge to imx-ldb in addition to
existing support to attach a LVDS panel.
This patch does a simple code refactoring by moving code
from for_each_child_of_node iterator to a new function named
imx_ldb_panel_ddc(). This was necessary to allow the panel ddc
code to run only when the imx_ldb is not attached to a bridge.
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Peter Senna Tschudin <peter.senna@collabora.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
If reserve_real_mode() fails, panicing immediately means we're
doomed. Make it safe to try more than once to allocate the
trampoline:
- Degrade a failure from panic() to pr_info(). (If we make it to
setup_real_mode() without reserving the trampoline, we'll panic
them.)
- Factor out helpers so that platform code can supply a specific
address to try.
- Warn if reserve_real_mode() is called after we're done with the
memblock allocator. If that were to happen, we would behave
unpredictably.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mario Limonciello <mario_limonciello@dell.com>
Cc: Matt Fleming <mfleming@suse.de>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/876e383038f3e9971aa72fd20a4f5da05f9d193d.1470821230.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
There's no need to run setup_real_mode() as early as we run it.
Defer it to the same early_initcall that sets up the page
permissions for the real mode code.
This should be a code size reduction. More importantly, it give us
a longer window in which we can allocate the real mode trampoline.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mario Limonciello <mario_limonciello@dell.com>
Cc: Matt Fleming <mfleming@suse.de>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/fd62f0da4f79357695e9bf3e365623736b05f119.1470821230.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The initialization process for trampoline_cr4_features and
mmu_cr4_features was confusing. The intent is for mmu_cr4_features
and *trampoline_cr4_features to stay in sync, but
trampoline_cr4_features is NULL until setup_real_mode() runs. The
old code synchronized *trampoline_cr4_features *twice*, once in
setup_real_mode() and once in setup_arch(). It also initialized
mmu_cr4_features in setup_real_mode(), which causes the actual value
of mmu_cr4_features to potentially depend on when setup_real_mode()
is called.
With this patch, mmu_cr4_features is initialized directly in
setup_arch(), and *trampoline_cr4_features is synchronized to
mmu_cr4_features when the trampoline is set up.
After this patch, it should be safe to defer setup_real_mode().
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mario Limonciello <mario_limonciello@dell.com>
Cc: Matt Fleming <mfleming@suse.de>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/d48a263f9912389b957dd495a7127b009259ffe0.1470821230.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
reserve_bios_regions() is a quirk that reserves memory that we might
otherwise think is available. There's no need to run it so early,
and running it before we have the memory map initialized with its
non-quirky inputs makes it hard to make reserve_bios_regions() more
intelligent.
Move it right after we populate the memblock state.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mario Limonciello <mario_limonciello@dell.com>
Cc: Matt Fleming <mfleming@suse.de>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/59f58618911005c799c6c9979ce6ae4881d907c2.1470821230.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Since commit:
52aec3308db8 ("x86/tlb: replace INVALIDATE_TLB_VECTOR by CALL_FUNCTION_VECTOR")
the TLB remote shootdown is done through call function vector. That
commit didn't take care of irq_tlb_count, which a later commit:
fd0f5869724f ("x86: Distinguish TLB shootdown interrupts from other functions call interrupts")
... tried to fix.
The fix assumes every increase of irq_tlb_count has a corresponding
increase of irq_call_count. So the irq_call_count is always bigger than
irq_tlb_count and we could substract irq_tlb_count from irq_call_count.
Unfortunately this is not true for the smp_call_function_single() case.
The IPI is only sent if the target CPU's call_single_queue is empty when
adding a csd into it in generic_exec_single. That means if two threads
are both adding flush tlb csds to the same CPU's call_single_queue, only
one IPI is sent. In other words, the irq_call_count is incremented by 1
but irq_tlb_count is incremented by 2. Over time, irq_tlb_count will be
bigger than irq_call_count and the substract will produce a very large
irq_call_count value due to overflow.
Considering that:
1) it's not worth to send more IPIs for the sake of accurate counting of
irq_call_count in generic_exec_single();
2) it's not easy to tell if the call function interrupt is for TLB
shootdown in __smp_call_function_single_interrupt().
Not to exclude TLB shootdown from call function count seems to be the
simplest fix and this patch just does that.
This bug was found by LKP's cyclic performance regression tracking recently
with the vm-scalability test suite. I have bisected to commit:
3dec0ba0be6a ("mm/rmap: share the i_mmap_rwsem")
This commit didn't do anything wrong but revealed the irq_call_count
problem. IIUC, the commit makes rwc->remap_one in rmap_walk_file
concurrent with multiple threads. When remap_one is try_to_unmap_one(),
then multiple threads could queue flush TLB to the same CPU but only
one IPI will be sent.
Since the commit was added in Linux v3.19, the counting problem only
shows up from v3.19 onwards.
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Cc: Alex Shi <alex.shi@linaro.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomoki Sekiyama <tomoki.sekiyama.qu@hitachi.com>
Link: http://lkml.kernel.org/r/20160811074430.GA18163@aaronlu.sh.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
A recent patch changed the format of a swap PTE.
The comment explaining the format of the swap PTE is wrong about
the bits used for the swap type field. Amusingly, the ASCII art
and the patch description are correct, but the comment itself
is wrong.
As I was looking at this, I also noticed that the
SWP_OFFSET_FIRST_BIT has an off-by-one error. This does not
really hurt anything. It just wasted a bit of space in the PTE,
giving us 2^59 bytes of addressable space in our swapfiles
instead of 2^60. But, it doesn't match with the comments, and it
wastes a bit of space, so fix it.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Fixes: 00839ee3b299 ("x86/mm: Move swap offset/type up in PTE to work around erratum")
Link: http://lkml.kernel.org/r/20160810172325.E56AD7DA@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Commit:
57430218317 ("sched/cputime: Count actually elapsed irq & softirq time")
... didn't take steal time into consideration with passing the noirqtime
kernel parameter.
As Paolo pointed out before:
| Why not? If idle=poll, for example, any time the guest is suspended (and
| thus cannot poll) does count as stolen time.
This patch fixes it by reducing steal time from idle time accounting when
the noirqtime parameter is true. The average idle time drops from 56.8%
to 54.75% for nohz idle kvm guest(noirqtime, idle=poll, four vCPUs running
on one pCPU).
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim <rkrcmar@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1470893795-3527-1-git-send-email-wanpeng.li@hotmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
debug_putstr() is used to output strings without using printf-like
formatting but debug_putstr(v) is defined as early_printk(v) in
arch/x86/lib/kaslr.c.
This makes clang reports the following warning when building
with -Wformat-security:
arch/x86/lib/kaslr.c:57:15: warning: format string is not a string
literal (potentially insecure) [-Wformat-security]
debug_putstr(purpose);
^~~~~~~
Fix this by using "%s" in early_printk().
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160806102039.27221-1-nicolas.iooss_linux@m4x.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Some panels only accept bpc (bit per color) 6-bit.
But, the default bpc in mt8173 display data path is 8-bit.
If we didn't enable dithering function to convert bpc,
display cannot show the smooth grayscale image.
In mt8173, the dithering function in OD (OverDrive) and
GAMMA module, we have to config them with
connector->display_mode.bpc when CRTC initial.
1. Clear the default value at *_DITHER_5 and *_DITHER_7 register.
2. Calculate the LSB_ERR_SHIFT bits and ADD_LSHIFT bits two values.
i.e. Input bpc of OD is 10 bits, we assume the bpc of panel is 6-bit,
so, we need to set 4-bit to LSB_ERR_SHIFT and ADD_LSHIFT bits respectively.
3. Then, set the OD or GAMMA to dithering mode depends on path-1 or path-2.
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
Add gamma set function to correct brightness values.
It applies arbitrary mapping curve to compensate the
incorrect transfer function of the panel.
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
|
randconfig-4.8
This is the pxa changes for v4.8 cycle.
This is a tiny fix couple to enable changes in includes in
gpio API without breaking pxa boards.
* tag 'pxa-fixes-v4.8' of https://github.com/rjarzmik/linux:
ARM: pxa: add module.h for corgi symbol_get/symbol_put usage
ARM: pxa: add module.h for spitz symbol_get/symbol_put usage
|
|
In order to correct brightness values, we have
to support gamma funciton on MT8173. In MT8173,
we have two engines for supporting gamma function:
AAL and GAMMA. This patch add some GAMMA engine
basic function, include config, start and stop
function.
Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
|
