summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-03-14ALSA: asihpi: check pao in control_message()Kuninori Morimoto
control_message() might be called with pao = NULL. Here indicates control_message() as sample. (B) static void control_message(struct hpi_adapter_obj *pao, ...) { ^^^ struct hpi_hw_obj *phw = pao->priv; ... ^^^ } (A) void _HPI_6205(struct hpi_adapter_obj *pao, ...) { ^^^ ... case HPI_OBJ_CONTROL: (B) control_message(pao, phm, phr); break; ^^^ ... } void HPI_6205(...) { ... (A) _HPI_6205(NULL, phm, phr); ... ^^^^ } Therefore, We will get too many warning via cppcheck, like below sound/pci/asihpi/hpi6205.c:238:27: warning: Possible null pointer dereference: pao [nullPointer] struct hpi_hw_obj *phw = pao->priv; ^ sound/pci/asihpi/hpi6205.c:433:13: note: Calling function '_HPI_6205', 1st argument 'NULL' value is 0 _HPI_6205(NULL, phm, phr); ^ sound/pci/asihpi/hpi6205.c:401:20: note: Calling function 'control_message', 1st argument 'pao' value is 0 control_message(pao, phm, phr); ^ Set phr->error like many functions doing, and don't call _HPI_6205() with NULL. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87ttypeaqz.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-03-14net: hsr: Don't log netdev_err message on unknown prp dst nodeKristian Overskeid
If no frames has been exchanged with a node for HSR_NODE_FORGET_TIME, the node will be deleted from the node_db list. If a frame is sent to the node after it is deleted, a netdev_err message for each slave interface is produced. This should not happen with dan nodes because of supervision frames, but can happen often with san nodes, which clutters the kernel log. Since the hsr protocol does not support sans, this is only relevant for the prp protocol. Signed-off-by: Kristian Overskeid <koverskeid@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-03-14block: do not reverse request order when flushing plug listJan Kara
Commit 26fed4ac4eab ("block: flush plug based on hardware and software queue order") changed flushing of plug list to submit requests one device at a time. However while doing that it also started using list_add_tail() instead of list_add() used previously thus effectively submitting requests in reverse order. Also when forming a rq_list with remaining requests (in case two or more devices are used), we effectively reverse the ordering of the plug list for each device we process. Submitting requests in reverse order has negative impact on performance for rotational disks (when BFQ is not in use). We observe 10-25% regression in random 4k write throughput, as well as ~20% regression in MariaDB OLTP benchmark on rotational storage on btrfs filesystem. Fix the problem by preserving ordering of the plug list when inserting requests into the queuelist as well as by appending to requeue_list instead of prepending to it. Fixes: 26fed4ac4eab ("block: flush plug based on hardware and software queue order") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230313093002.11756-1-jack@suse.cz Signed-off-by: Jens Axboe <axboe@kernel.dk>
2023-03-14drm/amdgpu/vcn: Disable indirect SRAM on Vangogh broken BIOSesGuilherme G. Piccoli
The VCN firmware loading path enables the indirect SRAM mode if it's advertised as supported. We might have some cases of FW issues that prevents this mode to working properly though, ending-up in a failed probe. An example below, observed in the Steam Deck: [...] [drm] failed to load ucode VCN0_RAM(0x3A) [drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF0000) amdgpu 0000:04:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring vcn_dec_0 test failed (-110) [drm:amdgpu_device_init.cold [amdgpu]] *ERROR* hw_init of IP block <vcn_v3_0> failed -110 amdgpu 0000:04:00.0: amdgpu: amdgpu_device_ip_init failed amdgpu 0000:04:00.0: amdgpu: Fatal error during GPU init [...] Disabling the VCN block circumvents this, but it's a very invasive workaround that turns off the entire feature. So, let's add a quirk on VCN loading that checks for known problematic BIOSes on Vangogh, so we can proactively disable the indirect SRAM mode and allow the HW proper probe and VCN IP block to work fine. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2385 Fixes: 82132ecc5432 ("drm/amdgpu: enable Vangogh VCN indirect sram mode") Cc: stable@vger.kernel.org Cc: James Zhu <James.Zhu@amd.com> Cc: Leo Liu <leo.liu@amd.com> Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-14drm/amdgpu/nv: fix codec array for SR_IOVAlex Deucher
Copy paste error. Fixes: 384334120b66 ("drm/amdgpu/nv: don't expose AV1 if VCN0 is harvested") Reported-by: Abaci Robot <abaci@linux.alibaba.com> Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=4454 Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Acked-by: Guchun Chen <guchun.chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-14drm/amd/display: Write to correct dirty_rectBenjamin Cheng
When FB_DAMAGE_CLIPS are provided in a non-MPO scenario, the loop does not use the counter i. This causes the fill_dc_dity_rect() to always fill dirty_rects[0], causing graphical artifacts when a damage clip aware DRM client sends more than 1 damage clip. Instead, use the flip_addrs->dirty_rect_count which is incremented by fill_dc_dirty_rect() on a successful fill. Fixes: 30ebe41582d1 ("drm/amd/display: add FB_DAMAGE_CLIPS support") Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2453 Signed-off-by: Benjamin Cheng <ben@bcheng.me> Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x
2023-03-14drm/amdgpu: move poll enabled/disable into non DC pathGuchun Chen
Some amd asics having reliable hotplug support don't call drm_kms_helper_poll_init in driver init sequence. However, due to the unified suspend/resume path for all asics, because the output_poll_work->func is not set for these asics, a warning arrives when suspending. [ 90.656049] <TASK> [ 90.656050] ? console_unlock+0x4d/0x100 [ 90.656053] ? __irq_work_queue_local+0x27/0x60 [ 90.656056] ? irq_work_queue+0x2b/0x50 [ 90.656057] ? __wake_up_klogd+0x40/0x60 [ 90.656059] __cancel_work_timer+0xed/0x180 [ 90.656061] drm_kms_helper_poll_disable.cold+0x1f/0x2c [drm_kms_helper] [ 90.656072] amdgpu_device_suspend+0x81/0x170 [amdgpu] [ 90.656180] amdgpu_pmops_runtime_suspend+0xb5/0x1b0 [amdgpu] [ 90.656269] pci_pm_runtime_suspend+0x61/0x1b0 drm_kms_helper_poll_enable/disable is valid when poll_init is called in amdgpu code, which is only used in non DC path. So move such codes into non-DC path code to get rid of such warnings. v1: introduce use_kms_poll flag in amdgpu as the poll stuff check v2: use dc_enabled as the flag to simply code v3: move code into non DC path instead of relying on any flag Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2411 Fixes: a4e771729a51 ("drm/probe_helper: sort out poll_running vs poll_enabled") Reported-by: Bert Karwatzki <spasswolf@web.de> Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Suggested-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2023-03-14drm/amd/display: Fix HDCP failing to enable after suspendBhawanpreet Lakha
[Why] On resume some displays are not ready for HDCP, so they will fail if we start the hdcp authentintication too soon. Add a delay so that the displays can be ready before we start. NOTE: Previoulsy this delay was set to 3 seconds but it was causing issues with compliance, 2 seconds should enough for compliance and the s3 resume case. [How] Change the Delay to 2 seconds. Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-14drm/amdkfd: fix potential kgd_mem UAFsChia-I Wu
kgd_mem pointers returned by kfd_process_device_translate_handle are only guaranteed to be valid while p->mutex is held. As soon as the mutex is unlocked, another thread can free the BO. Signed-off-by: Chia-I Wu <olvaffe@gmail.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-14drm/amdgpu/vcn: custom video info caps for sriovJane Jian
for sriov, we added a new flag to indicate av1 support, this will override the original caps info. Signed-off-by: Jane Jian <Jane.Jian@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-14drm/amd/pm: Fix sienna cichlid incorrect OD volage after resumeBłażej Szczygieł
Always setup overdrive tables after resume. Preserve only some user-defined settings in user_overdrive_table if they're set. Copy restored user_overdrive_table into od_table to get correct values. On cold boot, BTC was triggered and GfxVfCurve was calibrated. We got VfCurve settings (a). On resuming back, BTC will be triggered again and GfxVfCurve will be recalibrated. VfCurve settings (b) got may be different from those of cold boot. So if we reuse those VfCurve settings (a) got on cold boot on suspend, we can run into discrepencies. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1897 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2276 Reviewed-by: Evan Quan <evan.quan@amd.com> Signed-off-by: Błażej Szczygieł <mumei6102@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2023-03-14drm/amd/pm: bump SMU 13.0.4 driver_if header versionTim Huang
Align the SMU driver interface version with PMFW to suppress the version mismatch message on driver loading. Signed-off-by: Tim Huang <tim.huang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 6.1.x
2023-03-14drm/amdkfd: fix a potential double free in pqm_create_queueChia-I Wu
Set *q to NULL on errors, otherwise pqm_create_queue would free it again. Signed-off-by: Chia-I Wu <olvaffe@gmail.com> Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-14drm/amdkfd: Get prange->offset after svm_range_vram_node_newXiaogang Chen
During miration to vram prange->offset is valid after vram buffer is located, either use old one or allocate a new one. Move svm_range_vram_node_new before migrate for each vma to get valid prange->offset. v2: squash in warning fix Fixes: b4ee9606378b ("drm/amdkfd: Fix BO offset for multi-VMA page migration") Signed-off-by: Xiaogang Chen <Xiaogang.Chen@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-14drm/amdkfd: Fix BO offset for multi-VMA page migrationXiaogang Chen
svm_migrate_ram_to_vram migrates a prange from sys ram to vram. The prange may cross multiple vma. Need remember current dst vram offset in the TTM resource for each migration. v2: squash in warning fix (Alex) Signed-off-by: Xiaogang Chen <Xiaogang.Chen@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2023-03-14x86/PVH: obtain VGA console info in Dom0Jan Beulich
A new platform-op was added to Xen to allow obtaining the same VGA console information PV Dom0 is handed. Invoke the new function and have the output data processed by xen_init_vga(). Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Juergen Gross <jgross@suse.com> Link: https://lore.kernel.org/r/8f315e92-7bda-c124-71cc-478ab9c5e610@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2023-03-14KVM: selftests: Sync KVM exit reasons in selftestsVipin Sharma
Add missing KVM_EXIT_* reasons in KVM selftests from include/uapi/linux/kvm.h Signed-off-by: Vipin Sharma <vipinsh@google.com> Message-Id: <20230204014547.583711-5-vipinsh@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-14KVM: selftests: Add macro to generate KVM exit reason stringsSean Christopherson
Add and use a macro to generate the KVM exit reason strings array instead of relying on developers to correctly copy+paste+edit each string. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20230204014547.583711-4-vipinsh@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-14KVM: selftests: Print expected and actual exit reason in KVM exit reason assertVipin Sharma
Print what KVM exit reason a test was expecting and what it actually got int TEST_ASSERT_KVM_EXIT_REASON(). Signed-off-by: Vipin Sharma <vipinsh@google.com> Message-Id: <20230204014547.583711-3-vipinsh@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-14KVM: selftests: Make vCPU exit reason test assertion commonVipin Sharma
Make TEST_ASSERT_KVM_EXIT_REASON() macro and replace all exit reason test assert statements with it. No functional changes intended. Signed-off-by: Vipin Sharma <vipinsh@google.com> Reviewed-by: David Matlack <dmatlack@google.com> Message-Id: <20230204014547.583711-2-vipinsh@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-14KVM: selftests: Add EVTCHNOP_send slow path test to xen_shinfo_testDavid Woodhouse
When kvm_xen_evtchn_send() takes the slow path because the shinfo GPC needs to be revalidated, it used to violate the SRCU vs. kvm->lock locking rules and potentially cause a deadlock. Now that lockdep is learning to catch such things, make sure that code path is exercised by the selftest. Link: https://lore.kernel.org/all/20230113124606.10221-2-dwmw2@infradead.org Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20230204024151.1373296-5-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-14KVM: selftests: Use enum for test numbers in xen_shinfo_testDavid Woodhouse
The xen_shinfo_test started off with very few iterations, and the numbers we used in GUEST_SYNC() were precisely mapped to the RUNSTATE_xxx values anyway to start with. It has since grown quite a few more tests, and it's kind of awful to be handling them all as bare numbers. Especially when I want to add a new test in the middle. Define an enum for the test stages, and use it both in the guest code and the host switch statement. No functional change, if I can count to 24. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20230204024151.1373296-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-14KVM: selftests: Add helpers to make Xen-style VMCALL/VMMCALL hypercallsSean Christopherson
Add wrappers to do hypercalls using VMCALL/VMMCALL and Xen's register ABI (as opposed to full Xen-style hypercalls through a hypervisor provided page). Using the common helpers dedups a pile of code, and uses the native hypercall instruction when running on AMD. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20230204024151.1373296-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-14KVM: selftests: Move the guts of kvm_hypercall() to a separate macroSean Christopherson
Extract the guts of kvm_hypercall() to a macro so that Xen hypercalls, which have a different register ABI, can reuse the VMCALL vs. VMMCALL logic. No functional change intended. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20230204024151.1373296-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-14KVM: SVM: WARN if GATag generation drops VM or vCPU ID informationSean Christopherson
WARN if generating a GATag given a VM ID and vCPU ID doesn't yield the same IDs when pulling the IDs back out of the tag. Don't bother adding error handling to callers, this is very much a paranoid sanity check as KVM fully controls the VM ID and is supposed to reject too-big vCPU IDs. Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Message-Id: <20230207002156.521736-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-14KVM: SVM: Modify AVIC GATag to support max number of 512 vCPUsSuravee Suthikulpanit
Define AVIC_VCPU_ID_MASK based on AVIC_PHYSICAL_MAX_INDEX, i.e. the mask that effectively controls the largest guest physical APIC ID supported by x2AVIC, instead of hardcoding the number of bits to 8 (and the number of VM bits to 24). The AVIC GATag is programmed into the AMD IOMMU IRTE to provide a reference back to KVM in case the IOMMU cannot inject an interrupt into a non-running vCPU. In such a case, the IOMMU notifies software by creating a GALog entry with the corresponded GATag, and KVM then uses the GATag to find the correct VM+vCPU to kick. Dropping bit 8 from the GATag results in kicking the wrong vCPU when targeting vCPUs with x2APIC ID > 255. Fixes: 4d1d7942e36a ("KVM: SVM: Introduce logic to (de)activate x2AVIC mode") Cc: stable@vger.kernel.org Reported-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com> Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Co-developed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Message-Id: <20230207002156.521736-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-14KVM: SVM: Fix a benign off-by-one bug in AVIC physical table maskSean Christopherson
Define the "physical table max index mask" as bits 8:0, not 9:0. x2AVIC currently supports a max of 512 entries, i.e. the max index is 511, and the inputs to GENMASK_ULL() are inclusive. The bug is benign as bit 9 is reserved and never set by KVM, i.e. KVM is just clearing bits that are guaranteed to be zero. Note, as of this writing, APM "Rev. 3.39-October 2022" incorrectly states that bits 11:8 are reserved in Table B-1. VMCB Layout, Control Area. I.e. that table wasn't updated when x2AVIC support was added. Opportunistically fix the comment for the max AVIC ID to align with the code, and clean up comment formatting too. Fixes: 4d1d7942e36a ("KVM: SVM: Introduce logic to (de)activate x2AVIC mode") Cc: stable@vger.kernel.org Cc: Alejandro Jimenez <alejandro.j.jimenez@oracle.com> Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Tested-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Message-Id: <20230207002156.521736-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-14selftests: KVM: skip hugetlb tests if huge pages are not availablePaolo Bonzini
Right now, if KVM memory stress tests are run with hugetlb sources but hugetlb is not available (either in the kernel or because /proc/sys/vm/nr_hugepages is 0) the test will fail with a memory allocation error. This makes it impossible to add tests that default to hugetlb-backed memory, because on a machine with a default configuration they will fail. Therefore, check HugePages_Total as well and, if zero, direct the user to enable hugepages in procfs. Furthermore, return KSFT_SKIP whenever hugetlb is not available. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-14KVM: VMX: Use tabs instead of spaces for indentationRong Tao
Code indentation should use tabs where possible and miss a '*'. Signed-off-by: Rong Tao <rongtao@cestc.cn> Message-Id: <tencent_A492CB3F9592578451154442830EA1B02C07@qq.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-14KVM: VMX: Fix indentation coding style issueRong Tao
Code indentation should use tabs where possible. Signed-off-by: Rong Tao <rongtao@cestc.cn> Message-Id: <tencent_31E6ACADCB6915E157CF5113C41803212107@qq.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-14KVM: nVMX: remove unnecessary #ifdefPaolo Bonzini
nested_vmx_check_controls() has already run by the time KVM checks host state, so the "host address space size" exit control can only be set on x86-64 hosts. Simplify the condition at the cost of adding some dead code to 32-bit kernels. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-14KVM: nVMX: add missing consistency checks for CR0 and CR4Paolo Bonzini
The effective values of the guest CR0 and CR4 registers may differ from those included in the VMCS12. In particular, disabling EPT forces CR4.PAE=1 and disabling unrestricted guest mode forces CR0.PG=CR0.PE=1. Therefore, checks on these bits cannot be delegated to the processor and must be performed by KVM. Reported-by: Reima ISHII <ishiir@g.ecc.u-tokyo.ac.jp> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-03-14Merge tag 'kvmarm-fixes-6.3-1' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.3, part #1 A single patch to address a rather annoying bug w.r.t. guest timer offsetting. Effectively the synchronization of timer offsets between vCPUs was broken, leading to inconsistent timer reads within the VM.
2023-03-14powerpc/pseries: RTAS work area requires GENERIC_ALLOCATORRandy Dunlap
The RTAS work area allocator uses code that is built by GENERIC_ALLOCATOR, so the PSERIES Kconfig should select the required Kconfig symbol to fix multiple build errors. powerpc64-linux-ld: arch/powerpc/platforms/pseries/rtas-work-area.o: in function `.rtas_work_area_allocator_init': rtas-work-area.c:(.init.text+0x288): undefined reference to `.gen_pool_create' powerpc64-linux-ld: rtas-work-area.c:(.init.text+0x2dc): undefined reference to `.gen_pool_set_algo' powerpc64-linux-ld: rtas-work-area.c:(.init.text+0x310): undefined reference to `.gen_pool_add_owner' powerpc64-linux-ld: rtas-work-area.c:(.init.text+0x43c): undefined reference to `.gen_pool_destroy' powerpc64-linux-ld: arch/powerpc/platforms/pseries/rtas-work-area.o:(.toc+0x0): undefined reference to `gen_pool_first_fit_order_align' powerpc64-linux-ld: arch/powerpc/platforms/pseries/rtas-work-area.o: in function `.__rtas_work_area_alloc': rtas-work-area.c:(.ref.text+0x14c): undefined reference to `.gen_pool_alloc_algo_owner' powerpc64-linux-ld: rtas-work-area.c:(.ref.text+0x238): undefined reference to `.gen_pool_alloc_algo_owner' powerpc64-linux-ld: arch/powerpc/platforms/pseries/rtas-work-area.o: in function `.rtas_work_area_free': rtas-work-area.c:(.ref.text+0x44c): undefined reference to `.gen_pool_free_owner' Fixes: 43033bc62d34 ("powerpc/pseries: add RTAS work area allocator") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230223070116.660-2-rdunlap@infradead.org
2023-03-13net: ipa: fix a surprising number of bad offsetsAlex Elder
A recent commit eliminated a hack that adjusted the offset used for many GSI registers. It became possible because we now specify all GSI register offsets explicitly for every version of IPA. Unfortunately, a large number of register offsets were *not* updated as they should have been in that commit. For IPA v4.5+, the offset for every GSI register *except* the two inter-EE interrupt masking registers were supposed to have been reduced by 0xd000. Tested-by: Luca Weiss <luca.weiss@fairphone.com> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # SM8350-HDK Fixes: 59b12b1d27f3 ("net: ipa: kill gsi->virt_raw") Signed-off-by: Alex Elder <elder@linaro.org> Link: https://lore.kernel.org/r/20230310193709.1477102-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-13net: Use of_property_present() for testing DT property presenceRob Herring
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. As part of this, convert of_get_property/of_find_property calls to the recently added of_property_present() helper when we just want to test for presence of a property and nothing more. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Acked-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230310144716.1544083-1-robh@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-13net: dsa: mt7530: set PLL frequency and trgmii only when trgmii is usedArınç ÜNAL
As my testing on the MCM MT7530 switch on MT7621 SoC shows, setting the PLL frequency does not affect MII modes other than trgmii on port 5 and port 6. So the assumption is that the operation here called "setting the PLL frequency" actually sets the frequency of the TRGMII TX clock. Make it so that it and the rest of the trgmii setup run only when the trgmii mode is used. Tested rgmii and trgmii modes of port 6 on MCM MT7530 on MT7621AT Unielec U7621-06 and standalone MT7530 on MT7623NI Bananapi BPI-R2. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Link: https://lore.kernel.org/r/20230310073338.5836-2-arinc.unal@arinc9.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-13net: dsa: mt7530: remove now incorrect comment regarding port 5Arınç ÜNAL
Remove now incorrect comment regarding port 5 as GMAC5. This is supposed to be supported since commit 38f790a80560 ("net: dsa: mt7530: Add support for port 5") under mt7530_setup_port5(). Fixes: 38f790a80560 ("net: dsa: mt7530: Add support for port 5") Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Link: https://lore.kernel.org/r/20230310073338.5836-1-arinc.unal@arinc9.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-13Merge branch '40GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== i40e: support XDP multi-buffer Tirthendu Sarkar says: This patchset adds multi-buffer support for XDP. Tx side already has support for multi-buffer. This patchset focuses on Rx side. The last patch contains actual multi-buffer changes while the previous ones are preparatory patches. On receiving the first buffer of a packet, xdp_buff is built and its subsequent buffers are added to it as frags. While 'next_to_clean' keeps pointing to the first descriptor, the newly introduced 'next_to_process' keeps track of every descriptor for the packet. On receiving EOP buffer the XDP program is called and appropriate action is taken (building skb for XDP_PASS, reusing page for XDP_DROP, adjusting page offsets for XDP_{REDIRECT,TX}). The patchset also streamlines page offset adjustments for buffer reuse to make it easier to post process the rx_buffers after running XDP prog. With this patchset there does not seem to be any performance degradation for XDP_PASS and some improvement (~1% for XDP_TX, ~5% for XDP_DROP) when measured using xdp_rxq_info program from samples/bpf/ for 64B packets. v1: https://lore.kernel.org/netdev/20230306210822.3381942-1-anthony.l.nguyen@intel.com/ * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: i40e: add support for XDP multi-buffer Rx i40e: add xdp_buff to i40e_ring struct i40e: introduce next_to_process to i40e_ring i40e: use frame_sz instead of recalculating truesize for building skb i40e: Change size to truesize when using i40e_rx_buffer_flip() i40e: add pre-xdp page_count in rx_buffer i40e: change Rx buffer size for legacy-rx to support XDP multi-buffer i40e: consolidate maximum frame size calculation for vsi ==================== Link: https://lore.kernel.org/r/20230309212819.1198218-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-13qed/qed_dev: guard against a possible division by zeroDaniil Tatianin
Previously we would divide total_left_rate by zero if num_vports happened to be 1 because non_requested_count is calculated as num_vports - req_count. Guard against this by validating num_vports at the beginning and returning an error otherwise. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Fixes: bcd197c81f63 ("qed: Add vport WFQ configuration APIs") Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230309201556.191392-1-d-tatianin@yandex-team.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-13selftests: tc-testing: add tests for action bindingPedro Tammela
Add tests that check if filters can bind actions, that is create an action independently and then bind to a filter. tdc-tests under category 'infra': 1..18 ok 1 abdc - Reference pedit action object in filter ok 2 7a70 - Reference mpls action object in filter ok 3 d241 - Reference bpf action object in filter ok 4 383a - Reference connmark action object in filter ok 5 c619 - Reference csum action object in filter ok 6 a93d - Reference ct action object in filter ok 7 8bb5 - Reference ctinfo action object in filter ok 8 2241 - Reference gact action object in filter ok 9 35e9 - Reference gate action object in filter ok 10 b22e - Reference ife action object in filter ok 11 ef74 - Reference mirred action object in filter ok 12 2c81 - Reference nat action object in filter ok 13 ac9d - Reference police action object in filter ok 14 68be - Reference sample action object in filter ok 15 cf01 - Reference skbedit action object in filter ok 16 c109 - Reference skbmod action object in filter ok 17 4abc - Reference tunnel_key action object in filter ok 18 dadd - Reference vlan action object in filter Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Pedro Tammela <pctammela@mojatatu.com> Link: https://lore.kernel.org/r/20230309175554.304824-1-pctammela@mojatatu.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-13bnxt: avoid overflow in bnxt_get_nvram_directory()Maxim Korotkov
The value of an arithmetic expression is subject of possible overflow due to a failure to cast operands to a larger data type before performing arithmetic. Used macro for multiplication instead operator for avoiding overflow. Found by Security Code and Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Maxim Korotkov <korotkov.maxim.s@gmail.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Link: https://lore.kernel.org/r/20230309174347.3515-1-korotkov.maxim.s@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-13net: virtio_net: implement exact header length guest featureJiri Pirko
Virtio spec introduced a feature VIRTIO_NET_F_GUEST_HDRLEN which when set implicates that device benefits from knowing the exact size of the header. For compatibility, to signal to the device that the header is reliable driver also needs to set this feature. Without this feature set by driver, device has to figure out the header size itself. Quoting the original virtio spec: "hdr_len is a hint to the device as to how much of the header needs to be kept to copy into each packet" "a hint" might not be clear for the reader what does it mean, if it is "maybe like that" of "exactly like that". This feature just makes it crystal clear and let the device count on the hdr_len being filled up by the exact length of header. Also note the spec already has following note about hdr_len: "Due to various bugs in implementations, this field is not useful as a guarantee of the transport header size." Without this feature the device needs to parse the header in core data path handling. Accurate information helps the device to eliminate such header parsing and directly use the hardware accelerators for GSO operation. virtio_net_hdr_from_skb() fills up hdr_len to skb_headlen(skb). The driver already complies to fill the correct value. Introduce the feature and advertise it. Note that virtio spec also includes following note for device implementation: "Caution should be taken by the implementation so as to prevent a malicious driver from attacking the device by setting an incorrect hdr_len." There is a plan to support this feature in our emulated device. A device of SolidRun offers this feature bit. They claim this feature will save the device a few cycles for every GSO packet. Link: https://docs.oasis-open.org/virtio/virtio/v1.2/cs01/virtio-v1.2-cs01.html#x1-230006x3 Signed-off-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Alvaro Karsz <alvaro.karsz@solid-run.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20230309094559.917857-1-jiri@resnulli.us Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-13net: hsr: Don't log netdev_err message on unknown prp dst nodeKristian Overskeid
If no frames has been exchanged with a node for HSR_NODE_FORGET_TIME, the node will be deleted from the node_db list. If a frame is sent to the node after it is deleted, a netdev_err message for each slave interface is produced. This should not happen with dan nodes because of supervision frames, but can happen often with san nodes, which clutters the kernel log. Since the hsr protocol does not support sans, this is only relevant for the prp protocol. Signed-off-by: Kristian Overskeid <koverskeid@gmail.com> Link: https://lore.kernel.org/r/20230309092302.179586-1-koverskeid@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-13net: phy: smsc: use device_property_present in smsc_phy_probeHeiner Kallweit
Use unified device property API. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/a969f012-1d3b-7a36-51cf-89a5f8f15a9b@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-13net/smc: fix NULL sndbuf_desc in smc_cdc_tx_handler()D. Wythe
When performing a stress test on SMC-R by rmmod mlx5_ib driver during the wrk/nginx test, we found that there is a probability of triggering a panic while terminating all link groups. This issue dues to the race between smc_smcr_terminate_all() and smc_buf_create(). smc_smcr_terminate_all smc_buf_create /* init */ conn->sndbuf_desc = NULL; ... __smc_lgr_terminate smc_conn_kill smc_close_abort smc_cdc_get_slot_and_msg_send __softirqentry_text_start smc_wr_tx_process_cqe smc_cdc_tx_handler READ(conn->sndbuf_desc->len); /* panic dues to NULL sndbuf_desc */ conn->sndbuf_desc = xxx; This patch tries to fix the issue by always to check the sndbuf_desc before send any cdc msg, to make sure that no null pointer is seen during cqe processing. Fixes: 0b29ec643613 ("net/smc: immediate termination for SMCR link groups") Signed-off-by: D. Wythe <alibuda@linux.alibaba.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Link: https://lore.kernel.org/r/1678263432-17329-1-git-send-email-alibuda@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-13net: socket: suppress unused warningVincenzo Palazzo
suppress unused warnings and fix the error that there is with the W=1 enabled. Warning generated net/socket.c: In function ‘__sys_getsockopt’: net/socket.c:2300:13: error: variable ‘max_optlen’ set but not used [-Werror=unused-but-set-variable] 2300 | int max_optlen; Signed-off-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230310221851.304657-1-vincenzopalazzodev@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-13bnxt_en: reset PHC frequency in free-running modeVadim Fedorenko
When using a PHC in shared between multiple hosts, the previous frequency value may not be reset and could lead to host being unable to compensate the offset with timecounter adjustments. To avoid such state reset the hardware frequency of PHC to zero on init. Some refactoring is needed to make code readable. Fixes: 85036aee1938 ("bnxt_en: Add a non-real time mode to access NIC clock") Signed-off-by: Vadim Fedorenko <vadfed@meta.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Link: https://lore.kernel.org/r/20230310151356.678059-1-vadfed@meta.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-13net: phy: dp83867: Disable IRQs on suspendAlexander Stein
Before putting the PHY into IEEE power down mode, disable IRQs to prevent accessing the PHY once MDIO has already been shutdown. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230310074500.3472858-1-alexander.stein@ew.tq-group.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-13net: phy: micrel: Add support for PTP_PF_PEROUT for lan8841Horatiu Vultur
Lan8841 has 10 GPIOs and it has 2 events(EVENT_A and EVENT_B). It is possible to assigned the 2 events to any of the GPIOs, but a GPIO can have only 1 event at a time. These events are used to generate periodic signals. It is possible to configure the length, the start time and the period of the signal by configuring the event. Currently the SW uses only EVENT_A to generate the perout. These events are generated by comparing the target time with the PHC time. In case the PHC time is changed to a value bigger than the target time + reload time, then it would generate only 1 event and then it would stop because target time + reload time is small than PHC time. Therefore it is required to change also the target time every time when the PHC is changed. The same will apply also when the PHC time is changed to a smaller value. This was tested using: testptp -L 6,2 testptp -p 1000000000 -w 200000000 Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20230307214402.793057-1-horatiu.vultur@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-06 03:42:32 +0000