summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-01-10mlxsw: spectrum_qdisc: Don't use variable array in ↵Jiri Pirko
mlxsw_sp_tclass_congestion_enable Resolve the sparse warning: "sparse: Variable length array is used." Use 2 arrays for 2 PRM register accesses. Fixes: 96f17e0776c2 ("mlxsw: spectrum: Support RED qdisc offload") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Yuval Mintz <yuvalm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10mlxsw: pci: Wait after reset before accessing HWYuval Mintz
After performing reset driver polls on HW indication until learning that the reset is done, but immediately after reset the device becomes unresponsive which might lead to completion timeout on the first read. Wait for 100ms before starting the polling. Fixes: 233fa44bd67a ("mlxsw: pci: Implement reset done check") Signed-off-by: Yuval Mintz <yuvalm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10nfp: always unmask aux interrupts at initJakub Kicinski
The link state and exception interrupts may be masked when we probe. The firmware should in theory prevent sending (and automasking) those interrupts if the device is disabled, but if my reading of the FW code is correct there are firmwares out there with race conditions in this area. The interrupt may also be masked if previous driver which used the device was malfunctioning and we didn't load the FW (there is no other good way to comprehensively reset the PF). Note that FW unmasks the data interrupts by itself when vNIC is enabled, such helpful operation is not performed for LSC/EXN interrupts. Always unmask the auxiliary interrupts after request_irq(). On the remove path add missing PCI write flush before free_irq(). Fixes: 4c3523623dc0 ("net: add driver for Netronome NFP4000/NFP6000 NIC VFs") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10drm/amd/pp: Implement get_max_high_clocks for CI/VIRex Zhu
v2: add table length check. DC component expect PP to give max engine clock and memory clock through pp_get_display_mode_validation_clocks on DGPU as well. This patch can fix MultiGPU-Display blank out with 1 IGPU-4k display and 2 DGPU-two 4K displays. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Rex Zhu <Rex.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-01-10MAINTAINERS: add David (Chunming) Zhou as additional amdgpu maintainerChristian König
Just another contact for the amdgpu driver. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-01-10drm/amdgpu: fix 64bit BAR detectionChristian König
Windows added by the BIOS are not marked as 64bit because they are usually not changeable anyway. This fixes large BAR support on my new Ryzen build system. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-01-10drm/amdgpu: optimize moved handling only when vm_debug is inactiveChristian König
Otherwise we would completely circumvent that debugging feature. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Roger He <Hongbo.He@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-01-10drm/amdgpu: simplify huge page handlingChristian König
Update the PDEs after resetting the huge flag. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-01-10drm/amdgpu: update VM PDs after the PTsChristian König
Necessary for the next patch. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-01-10drm/amdgpu: minor optimize VM moved handling v2Christian König
Try to lock moved BOs if it's successful we can update the PTEs directly to the new location. v2: rebase Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-01-10drm/amdgpu: loosen the criteria for huge pages a bitChristian König
We can actually handle invalid huge pages perfectly fine now. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Acked-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-01-10drm/amd/powerplay: set pp_num_states as 0 on error situationEvan Quan
Signed-off-by: Evan Quan <evan.quan@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-01-10drm/ttm: specify DMA_ATTR_NO_WARN for huge page poolsChristian König
Suppress warning messages when allocating huge pages fails since we can always fall back to normal pages. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-01-10drm/ttm: remove ttm_bo_default_io_mem_pfnTan Xiaojun
No one will use this function except ttm_bo_io_mem_pfn() now, so move the calculation of ttm_bo_default_io_mem_pfn() into ttm_bo_io_mem_pfn() and do some cleanup. Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-01-10staging: remove the default io_mem_pfn setTan Xiaojun
The default interface situation has been taken into the framework, so remove the default set of each module. Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-01-10drm/amd/powerplay: fix memory leakage when reload (v2)Yintian Tao
add smu_free_memory when smu fini to prevent memory leakage v2: squash in typo fix (Yintian) and warning (Harry) Signed-off-by: Yintian Tao <yttao@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-01-10drm/amdgpu/gfx9: only init the apertures used by KGD (v2)Alex Deucher
Use adev->vm_manager.id_mgr[0].num_ids rather than hardcoded 16. v2: use AMDGPU_GFXHUB rather than hardcoded 0 (Christian) Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Noticed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-01-10drm/amdgpu: add atpx quirk handling (v2)Alex Deucher
Add quirks for handling PX/HG systems. In this case, add a quirk for a weston dGPU that only seems to properly power down using ATPX power control rather than HG (_PR3). v2: append a new weston XT Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com> (v2) Reviewed-and-Tested-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org
2018-01-10drm/amdgpu: Add dpm quirk for Jet PRO (v2)Alex Deucher
Fixes stability issues. v2: clamp sclk to 600 Mhz Bug: https://bugs.freedesktop.org/show_bug.cgi?id=103370 Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-01-10drm/radeon: Add dpm quirk for Jet PRO (v2)Alex Deucher
Fixes stability issues. v2: clamp sclk to 600 Mhz Bug: https://bugs.freedesktop.org/show_bug.cgi?id=103370 Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2018-01-108021q: fix a memory leak for VLAN 0 deviceCong Wang
A vlan device with vid 0 is allow to creat by not able to be fully cleaned up by unregister_vlan_dev() which checks for vlan_id!=0. Also, VLAN 0 is probably not a valid number and it is kinda "reserved" for HW accelerating devices, but it is probably too late to reject it from creation even if makes sense. Instead, just remove the check in unregister_vlan_dev(). Reported-by: Dmitry Vyukov <dvyukov@google.com> Fixes: ad1afb003939 ("vlan_dev: VLAN 0 should be treated as "no vlan tag" (802.1p packet)") Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10Merge tag 'wireless-drivers-for-davem-2018-01-09' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for 4.15 Hopefully the last set of fixes for 4.15. iwlwifi * fix DMA mapping regression since v4.14 wcn36xx * fix dynamic power save which has been broken since the driver was commited ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10of_mdio: avoid MDIO bus removal when a PHY is missingMadalin Bucur
If one of the child devices is missing the of_mdiobus_register_phy() call will return -ENODEV. When a missing device is encountered the registration of the remaining PHYs is stopped and the MDIO bus will fail to register. Propagate all errors except ENODEV to avoid it. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10caif_usb: use strlcpy() instead of strncpy()Xiongfeng Wang
gcc-8 reports net/caif/caif_usb.c: In function 'cfusbl_device_notify': ./include/linux/string.h:245:9: warning: '__builtin_strncpy' output may be truncated copying 15 bytes from a string of length 15 [-Wstringop-truncation] The compiler require that the input param 'len' of strncpy() should be greater than the length of the src string, so that '\0' is copied as well. We can just use strlcpy() to avoid this warning. Signed-off-by: Xiongfeng Wang <xiongfeng.wang@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10doc: clarification about setting SO_ZEROCOPYKornilios Kourtis
Signed-off-by: Kornilios Kourtis <kou@zurich.ibm.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10net: gianfar_ptp: move set_fipers() to spinlock protecting areaYangbo Lu
set_fipers() calling should be protected by spinlock in case that any interrupt breaks related registers setting and the function we expect. This patch is to move set_fipers() to spinlock protecting area in ptp_gianfar_adjtime(). Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10Merge branch 'sctp-Some-sockopt-optlen-fixes'David S. Miller
Marcelo Ricardo Leitner says: ==================== sctp: Some sockopt optlen fixes Hangbin Liu reported that some SCTP sockopt are allowing the user to get the kernel to allocate really large buffers by not having a ceiling on optlen. This patchset address this issue (in patch 2), replace an GFP_ATOMIC that isn't needed and avoid calculating the option size multiple times in some setsockopt. ==================== Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10sctp: make use of pre-calculated lenMarcelo Ricardo Leitner
Some sockopt handling functions were calculating the length of the buffer to be written to userspace and then calculating it again when actually writing the buffer, which could lead to some write not using an up-to-date length. This patch updates such places to just make use of the len variable. Also, replace some sizeof(type) to sizeof(var). Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10sctp: add a ceiling to optlen in some sockoptsMarcelo Ricardo Leitner
Hangbin Liu reported that some sockopt calls could cause the kernel to log a warning on memory allocation failure if the user supplied a large optlen value. That is because some of them called memdup_user() without a ceiling on optlen, allowing it to try to allocate really large buffers. This patch adds a ceiling by limiting optlen to the maximum allowed that would still make sense for these sockopt. Reported-by: Hangbin Liu <haliu@redhat.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10sctp: GFP_ATOMIC is not needed in sctp_setsockopt_eventsMarcelo Ricardo Leitner
So replace it with GFP_USER and also add __GFP_NOWARN. Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10drm/msm: Add devfreq support for the GPUJordan Crouse
Add support for devfreq to dynamically control the GPU frequency. By default try to use the 'simple_ondemand' governor which can adjust the frequency based on GPU load. v2: Fix __aeabi_uldivmod issue from the 0 day bot and use devfreq_recommended_opp() as suggested by Rob. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-01-10Merge tag 'sound-4.15-rc8' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of the last-minute small PCM fixes: - A workaround for the recent regression wrt PulseAudio - Removal of spurious WARN_ON() that is triggered by syzkaller - Fixes for aloop, hardening racy accesses - Fixes in PCM OSS emulation wrt the unabortable loops that may cause RCU stall" * tag 'sound-4.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: pcm: Allow aborting mutex lock at OSS read/write loops ALSA: pcm: Abort properly at pending signal in OSS read/write loops ALSA: aloop: Fix racy hw constraints adjustment ALSA: aloop: Fix inconsistent format due to incomplete rule ALSA: aloop: Release cable upon open error path ALSA: pcm: Workaround for weird PulseAudio behavior on rewind error ALSA: pcm: Add missing error checks in OSS emulation plugin builder ALSA: pcm: Remove incorrect snd_BUG_ON() usages
2018-01-10drm/i915: Stop getting the fault address from RING_FAULT_REGOscar Mateo
This register does not contain it. Instead, we have to look into FAULT_TLB_DATA0 & 1 (where, by the way, we can also get the address space). v2: Right formatting v3: - Use 12 (as per the register format) instead of PAGE_SIZE (Chris) - s/BITS_44_TO_47/HIGHBITS (Chris) - Right formatting, this time for real Fixes: b03ec3d67ab8 ("drm/i915: There is only one fault register from GEN8 onwards") Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/1513982329-32191-1-git-send-email-oscar.mateo@intel.com Reviewed-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2018-01-10x86/alternatives: Fix optimize_nops() checkingBorislav Petkov
The alternatives code checks only the first byte whether it is a NOP, but with NOPs in front of the payload and having actual instructions after it breaks the "optimized' test. Make sure to scan all bytes before deciding to optimize the NOPs in there. Reported-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Tim Chen <tim.c.chen@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Andrew Lutomirski <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org> Cc: Paul Turner <pjt@google.com> Link: https://lkml.kernel.org/r/20180110112815.mgciyf5acwacphkq@pd.tnic
2018-01-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2018-01-09 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Prevent out-of-bounds speculation in BPF maps by masking the index after bounds checks in order to fix spectre v1, and add an option BPF_JIT_ALWAYS_ON into Kconfig that allows for removing the BPF interpreter from the kernel in favor of JIT-only mode to make spectre v2 harder, from Alexei. 2) Remove false sharing of map refcount with max_entries which was used in spectre v1, from Daniel. 3) Add a missing NULL psock check in sockmap in order to fix a race, from John. 4) Fix test_align BPF selftest case since a recent change in verifier rejects the bit-wise arithmetic on pointers earlier but test_align update was missing, from Alexei. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-10drm/vmwgfx: Potential off by one in vmw_view_add()Dan Carpenter
The vmw_view_cmd_to_type() function returns vmw_view_max (3) on error. It's one element beyond the end of the vmw_view_cotables[] table. My read on this is that it's possible to hit this failure. header->id comes from vmw_cmd_check() and it's a user controlled number between 1040 and 1225 so we can hit that error. But I don't have the hardware to test this code. Fixes: d80efd5cb3de ("drm/vmwgfx: Initial DX support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Cc: <stable@vger.kernel.org>
2018-01-10drm/i915/guc: Add uc_fini_wq in gem_init unwind pathSagar Arun Kamble
While moving code around for solving lockdep issue for GuC log relay, spotted that uc_fini_wq is not being called in failure path in gem_init. Missed in the below commit. Add it. v2: Removed GEM_BUG_ON(!HAS_GUC()) from intel_uc_fini_wq as init happens only based on enable_guc module parameter and does not consider has_guc capability. (Michal) Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Fixes: 3176ff49bc3e ("drm/i915/guc: Move GuC workqueue allocations outside of the mutex") Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Michał Winiarski <michal.winiarski@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1515588857-10283-1-git-send-email-sagar.a.kamble@intel.com Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2018-01-10drm/msm/adreno: a5xx: Explicitly program the CP0 performance counterJordan Crouse
Even though the default countable for CP0 is CP_ALWAYS_COUNT (0), program the selector during HW initialization in an effort to be up front about which counters are programmed and why. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-01-10drm/msm/adreno: Read the speed bins for a5xx targetsJordan Crouse
Some 5xx based chipsets have different bins for GPU clock speeds. Read the fuses (if applicable) and set the appropriate OPP table. This will only work with OPP v2 tables - the bin will be ignored for legacy pwrlevel tables. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-01-10drm/msm/adreno: Move clock parsing to adreno_gpu_init()Jordan Crouse
Move the clock parsing to adreno_gpu_init() to allow for target specific probing and manipulation of the clock tables. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-01-10drm/msm/adreno: Cleanup chipid parsingJordan Crouse
We don't need to convert the chipid to an intermediate value and then back again into a struct adreno_rev. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-01-10drm/msm/gpu: Remove unused bus scaling codeJordan Crouse
Remove the downstream bus scaling code. It isn't needed for for compatibility with a downstream or vendor kernel. Get it out of the way to clear space for devfreq support. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-01-10drm/msm/adreno: Remove a useless call to dev_pm_opp_get_freq()Jordan Crouse
Calling dev_pm_opp_find_freq_floor() returns the matched frequency in 'freq'. We don't need to call dev_pm_opp_get_freq() again to get the frequency value. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-01-10drm/msm/adreno: Call dev_pm_opp_put()Jordan Crouse
We need to call dev_pm_opp_put() to put back the reference for the OPP struct after calling the various dev_pm_opp_get_* functions. Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-01-10xen/gntdev: Fix partial gntdev_mmap() cleanupRoss Lagerwall
When cleaning up after a partially successful gntdev_mmap(), unmap the successfully mapped grant pages otherwise Xen will kill the domain if in debug mode (Attempt to implicitly unmap a granted PTE) or Linux will kill the process and emit "BUG: Bad page map in process" if Xen is in release mode. This is only needed when use_ptemod is true because gntdev_put_map() will unmap grant pages itself when use_ptemod is false. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-01-10xen/gntdev: Fix off-by-one error when unmapping with holesRoss Lagerwall
If the requested range has a hole, the calculation of the number of pages to unmap is off by one. Fix it. Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-01-10gpio: Add missing open drain/source handling to gpiod_set_value_cansleep()Geert Uytterhoeven
Since commit f11a04464ae57e8d ("i2c: gpio: Enable working over slow can_sleep GPIOs"), probing the i2c RTC connected to an i2c-gpio bus on r8a7740/armadillo fails with: rtc-s35390a 0-0030: error resetting chip rtc-s35390a: probe of 0-0030 failed with error -5 More debug code reveals: i2c i2c-0: master_xfer[0] R, addr=0x30, len=1 i2c i2c-0: NAK from device addr 0x30 msg #0 s35390a_get_reg: ret = -6 Commit 02e479808b5d62f8 ("gpio: Alter semantics of *raw* operations to actually be raw") moved open drain/source handling from gpiod_set_raw_value_commit() to gpiod_set_value(), but forgot to take into account that gpiod_set_value_cansleep() also needs this handling. The i2c protocol mandates that i2c signals are open drain, hence i2c communication fails. Fix this by adding the missing handling to gpiod_set_value_cansleep(), using a new common helper gpiod_set_value_nocheck(). Fixes: 02e479808b5d62f8 ("gpio: Alter semantics of *raw* operations to actually be raw") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> [removed underscore syntax, added kerneldoc] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-01-10drm/tegra: sor: Fix hang on Tegra124 eDPThierry Reding
The SOR0 found on Tegra124 and Tegra210 only supports eDP and LVDS and therefore has a slightly different clock tree than the SOR1 which does not support eDP, but HDMI and DP instead. Commit e1335e2f0cfc ("drm/tegra: sor: Reimplement pad clock") breaks setups with eDP because the sor->clk_out clock is uninitialized and therefore setting the parent clock (either the safe clock or either of the display PLLs) fails, which can cause hangs later on since there is no clock driving the module. Fix this by falling back to the module clock for sor->clk_out on those setups. This guarantees that the module will always be clocked by an enabled clock and hence prevents those hangs. Fixes: e1335e2f0cfc ("drm/tegra: sor: Reimplement pad clock") Reported-by: Guillaume Tucker <guillaume.tucker@collabora.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2018-01-10drm/amdkfd: add ull suffix to 64bit definesOded Gabbay
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
2018-01-10powerpc/powernv: Check device-tree for RFI flush settingsOliver O'Halloran
New device-tree properties are available which tell the hypervisor settings related to the RFI flush. Use them to determine the appropriate flush instruction to use, and whether the flush is required. Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 07:25:09 +0000