summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-09-17ASoC: dt-bindings: ak4458: Add dsd-path propertyShengjiu Wang
Add "dsd-path" property, which is used for ak4497 codec to select the DSD input pin. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1600178220-28973-1-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17ASoC: tlv320adcx140: Add ASI Tx driveDan Murphy
Add a property to indicate if the device is to go into a High-z state on the Tx ASI output pins when the device is idle. Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200915190606.1744-3-dmurphy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17ASoC: tlv320adcx140: Add the config to configure Tx ASI outputDan Murphy
Add code to allow the ASI Tx output to be placed into High-z mode during unused ASI cycles. This allows for other devices that may be on the bus to drive the ASI out. By default the 320adcx140 sends 0's for unused cycles. Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200915190606.1744-4-dmurphy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17ASoC: qcom: lpass-sc7180: Add MODULE_DEVICE_TABLEDouglas Anderson
The lpass-sc7180 driver can be built as a module but is lacking a MODULE_DEVICE_TABLE. This means it won't auto-load. Fix this oversight. Fixes: 24caf8d9eb10 ("ASoC: qcom: lpass-sc7180: Add platform driver for lpass audio") Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200916111545.1.I4c3758817d94c433bafeac344a395e21ea6657e3@changeid Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17ASoC: SOF: Intel: Add support for tgl-hRander Wang
SOF will support tgl-h and tgl-lp in different FW binaries due to hardware difference, so create another dev_desc entry with FW name of sof-tgl-h.ri and dsp_desc named tglh_chip_info for tgl-h. Fixes: c8d2e2bfaeffa ("ASoC: SOF: Intel: add PCI IDs for ICL-H and TGL-H") Signed-off-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200917103609.2559916-1-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17ASoC: codec: tlv320aic32x4: do software reset before clock registrationMatthias Schiffer
To avoid the actual PLL settings to differ from the state expected by the clock driver, the codec should only be fully reset before the clocks are registered. But we also need to ensure that the software reset happens at all before clock registration, as not all boards have a reset GPIO. Move the software reset from aic32x4_component_probe() to aic32x4_probe() and reorder the reset and registration sequence: 1. Reset via GPIO (if available) 2. Reset via software 3. Register component 4. Register clocks Note that aic32x4_component_probe() is only called after aic32x4_probe() has finished, so the reset in aic32x4_component_probe() was happening too late. Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Link: https://lore.kernel.org/r/20200902133043.19504-2-matthias.schiffer@ew.tq-group.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17ASoC: codec: tlv320aic32x4: fix missing aic32x4_disable_regulators() in ↵Matthias Schiffer
error path The regulators need to be disabled in the aic32x4_register_clocks() failure case as well. Fixes: 9d4befff5a95 ("ASoC: codec: tlv3204: Moving GPIO reset and add ADC reset") Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Link: https://lore.kernel.org/r/20200902133043.19504-1-matthias.schiffer@ew.tq-group.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17ASoC: dt-bindings: Correct interrupt flags in examplesKrzysztof Kozlowski
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags. These are simple defines so they could be used in DTS but they will not have the same meaning: 1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE 2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING Correct the interrupt flags, assuming the author of the code wanted some logical behavior behind the name "ACTIVE_xxx", this is: ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200908145954.4629-1-krzk@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17ASoC: dt-bindings: aries-wm8994: Match compatibles with enumKrzysztof Kozlowski
The common pattern for enumerating compatibles is enum, not oneOf. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200902160025.20922-1-krzk@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17Merge branch 'asoc-5.9' into asoc-5.10Mark Brown
2020-09-17ASoC: fsl_sai: Set MCLK input or output directionShengjiu Wang
SAI support select MCLK direction with version.major > 3 and version.minor > 1, the default direction is input, set it to be output according to DT property. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/1600323079-5317-4-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17ASoC: fsl_sai: Add fsl_sai_check_version functionShengjiu Wang
fsl_sai_check_version can help to parse the version info in VERID and PARAM registers. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/1600323079-5317-3-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17ASoC: fsl_sai: Add new added registers and new bit definitionShengjiu Wang
On i.MX8MQ/i.MX8MN/i.MX8MM platform, the sai IP is upgraded. There are some new registers and new bit definition. This patch is to complete the register list. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/1600323079-5317-2-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17ASoC: q6afe-clocks: add q6afe clock controllerSrinivas Kandagatla
q6afe already exposes lpass clocks, however this was not presented as proper clock controller driver. This patch basically adds clock controller support for q6afe clocks. This is useful for other drivers like lpass digital codec or lpass lowpower island drivers to request or vote for these clocks. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200910135708.14842-3-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17ASoC: q6afe: dt-bindings: add q6afe clock bindingsSrinivas Kandagatla
q6afe exposes various lpass clocks controls via q6dsp q6afe commands. This patch adds bindings required for this clock controller. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200910135708.14842-2-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17ASoC: SOF: Intel: hda: reduce verbosity of boot error logsPierre-Louis Bossart
Previous commits reduced the verbosity of errors during boot iterations, but there are still a couple remaining which generate false positives. Errors should only be logged when after last attempt to download firmware failed. Duplicating logs and assigning them different levels based on the iteration number isn't really elegant, use macro as suggested by Guennadi. Suggested-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200917105633.2579047-9-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17ASoC: SOF: fix range checksGuennadi Liakhovetski
On multiple locations checks are performed of untrusted values after adding a constant to them. This is wrong, because the addition might overflow and the result can then pass the check, although the original value is invalid. Fix multiple such issues by checking the actual value and not a sum of it and a constant. Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200917105633.2579047-8-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17ASoC: SOF: remove several superfluous type-castsGuennadi Liakhovetski
No need to type-cast assignments between void and other pointers in C. Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200917105633.2579047-7-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17ASoC: SOF: (cosmetic) remove redundant "ret" variable usesGuennadi Liakhovetski
In some cases no "ret" variable is even needed, those functions always return 0 anyway, in other cases "ret" initialisation is redundant. Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200917105633.2579047-6-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17ASoC: SOF: control: update test for pm_runtime_get_sync()Pierre-Louis Bossart
We need to avoid reporting an error for -EACCESS when pm_runtime is not enabled. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200917105633.2579047-5-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17ASoC: SOF: debug: update test for pm_runtime_get_sync()Pierre-Louis Bossart
We need to avoid reporting an error for -EACCESS when pm_runtime is not enabled. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200917105633.2579047-4-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17ASoC: SOF: Add `src_hash` to `sof_ipc_fw_version` structureKarol Trzcinski
This field will be used to compare ldc file with loaded fw version, to assert validity of trace logs. Value used in sof-logger. Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200917105633.2579047-3-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17ASoC: SOF: imx: Add debug support for imx platformsIulian Olaru
This patch adds debug support for imx platforms. This is important in order to gather information about the state of the DSP in case of an oops and the reason for the oops. This is done by checking if a message with a panic code has been placed in the debug box, in the imx8_dsp_handle_request function from sof/imx. If positive, the function imx8_dump, added in common, will be called. The first step is to gather information about the registers, filename, line number and stack by calling the imx8_get_registers, added in common. Then the information will be printed to the console by calling the get_status function. Signed-off-by: Iulian Olaru <iulianolaru249@yahoo.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200917105633.2579047-2-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17ASoC: tlv320adcx140: Fix BCLK inversion for DSP modesDan Murphy
Fix the BCLK inversion for DSP modes This is how it is defined by ASoC: * BCLK: * - "normal" polarity means signal is available at rising edge of BCLK * - "inverted" polarity means signal is available at falling edge of BCLK The adcx140 defines the BCLK edge based on coding type. The PCM (DSP_A/B) should drive on rising and sample on falling edge, so from ASoC pov, it is IB_NF. But from the codec pov if it is configured in DSP mode, then the BCLK should not be inverted, defaults to the coding standard. For i2s, it is NB_NF from ASoC pov (drive on falling, sample on rising). >From the codec's pov BCLK should not invert either, as this is the default for the coding. So, inversion must take the format into account: IB_NF + DSP_A/B == the codec bclk inversion should be disabled NB_NF + DSP_A/B == the codec bclk inversion should be enabled NB_NF + I2S == the codec bclk inversion should be disabled Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200915190606.1744-2-dmurphy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17ASoC: tlv320adcx140: Idle the device while writing registersDan Murphy
It was observed that if the device was active and register writes were performed there were some unwanted behaviors particularly when writing the word length and some filter options. So when writing to the device the device should be placed in sleep mode and then exit sleep mode once the register update is complete. Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200915190606.1744-1-dmurphy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17ASoC: tlv320adcx140: Fix digital gain rangeCamel Guo
According to its datasheet, the digital gain should be -100 dB when CHx_DVOL is 1 and 27 dB when CHx_DVOL is 255. But with the current dig_vol_tlv, "Digital CHx Out Volume" shows 27.5 dB if CHx_DVOL is 255 and -95.5 dB if CHx_DVOL is 1. This commit fixes this bug. Fixes: 689c7655b50c ("ASoC: tlv320adcx140: Add the tlv320adcx140 codec driver family") Signed-off-by: Camel Guo <camelg@axis.com> Link: https://lore.kernel.org/r/20200908090417.16695-1-camel.guo@axis.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17ASoC: topology: disable size checks for bytes_ext controls if neededPierre-Louis Bossart
When CONFIG_SND_CTL_VALIDATION is set, accesses to extended bytes control generate spurious error messages when the size exceeds 512 bytes, such as [ 11.224223] sof_sdw sof_sdw: control 2:0:0:EQIIR5.0 eqiir_coef_5:0: invalid count 1024 In addition the error check returns -EINVAL which has the nasty side effect of preventing applications accessing controls from working, e.g. root@plb:~# alsamixer cannot load mixer controls: Invalid argument It's agreed that the control interface has been abused since 2014, but forcing a check should not prevent existing solutions from working. This patch skips the checks conditionally if CONFIG_SND_CTL_VALIDATION is set and the byte array provided by topology is > 512. This preserves the checks for all other cases. Fixes: 1a3232d2f61d2 ('ASoC: topology: Add support for TLV bytes controls') BugLink: https://github.com/thesofproject/linux/issues/2430 Reported-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200917103912.2565907-1-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-17ASoC: fsl_audmix: make clock and output src write onlyViorel Suman
"alsactl -f state.conf store/restore" sequence fails because setting "mixing clock source" and "output source" requires active TDM clock being started for configuration propagation. Make these two controls write only so that their values are not stored at "alsactl store". Signed-off-by: Viorel Suman <viorel.suman@nxp.com> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Link: https://lore.kernel.org/r/1600104274-13110-1-git-send-email-viorel.suman@oss.nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-14ASoC: rt1015: Fix the failure to flush DAC data before playbackderek.fang
Fix the failure to flush DAC data before playback. Signed-off-by: derek.fang <derek.fang@realtek.com> Link: https://lore.kernel.org/r/1600073839-6762-2-git-send-email-derek.fang@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-14ASoC: rt1015: Fix DC calibration on bypass boost modederek.fang
Fix the DC calibration unsuccessful issue on rt1015 bypass boost mode. Signed-off-by: derek.fang <derek.fang@realtek.com> Link: https://lore.kernel.org/r/1600073839-6762-1-git-send-email-derek.fang@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-11Merge series "ASoC: SOF: DSP core management fixes for 5.10" from Kai ↵Mark Brown
Vehmanen <kai.vehmanen@linux.intel.com>: This series contains some improvements to how DSP core management is done in SOF, and adds a distinction between cores managed by the host versus cores managed by the DSP. Pierre-Louis Bossart (1): ASoC: SOF: Intel: hda-loader: s/master/primary Ranjani Sridharan (3): ASoC: SOF: rename cores_mask to host_managed_cores_mask ASoC: SOF: Intel: hda: modify core_power_up/down op ASoC: SOF: Intel: remove the HDA_DSP_CORE_MASK() macro sound/soc/sof/intel/apl.c | 2 +- sound/soc/sof/intel/bdw.c | 2 +- sound/soc/sof/intel/byt.c | 6 +++--- sound/soc/sof/intel/cnl.c | 15 ++++----------- sound/soc/sof/intel/hda-dsp.c | 20 +++++++++++++++++--- sound/soc/sof/intel/hda-loader.c | 11 +++++------ sound/soc/sof/intel/hda.c | 2 +- sound/soc/sof/intel/hda.h | 3 --- sound/soc/sof/intel/shim.h | 2 +- sound/soc/sof/intel/tgl.c | 2 +- 10 files changed, 34 insertions(+), 31 deletions(-) -- 2.27.0
2020-09-11Merge series "ASoC: mediatek: mt8183-da7219: support machine driver for ↵Mark Brown
rt1015p" from Tzung-Bi Shih <tzungbi@google.com>: The series reuses mt8183-da7219-max98357.c for supporting machine driver with rt1015p speaker amplifier. The 1st patch adds document for the new proposed compatible string. The 2nd patch changes the machine driver to support "RT1015P" codec. Tzung-Bi Shih (2): ASoC: dt-bindings: mt8183-da7219: add compatible string for using rt1015p ASoC: mediatek: mt8183-da7219: support machine driver with rt1015p .../bindings/sound/mt8183-da7219-max98357.txt | 1 + sound/soc/mediatek/Kconfig | 1 + .../mediatek/mt8183/mt8183-da7219-max98357.c | 40 +++++++++++++++++++ 3 files changed, 42 insertions(+) -- 2.28.0.526.ge36021eeef-goog
2020-09-11Merge series "ASoC: ti: j721e-evm: Support for j7200 variant" from Peter ↵Mark Brown
Ujfalusi <peter.ujfalusi@ti.com>: Hi, Changes since v1: - Suffix the 2359296000 constant with 'u' to silence C90 warning When j7200 SOM is connected to the CPB, the audio setup is a bit different: Only 48KHz family have clock path, 44.1KHz is not supported. Update the binding documentation and add support for the j7200 version of CPB to the driver. Regards, Peter --- Peter Ujfalusi (2): ASoC: dt-bindings: ti,j721e-cpb-audio: Document support for j7200-cpb ASoC: ti: j721e-evm: Add support for j7200-cpb audio .../bindings/sound/ti,j721e-cpb-audio.yaml | 92 ++++++++++++++----- sound/soc/ti/j721e-evm.c | 11 +++ 2 files changed, 81 insertions(+), 22 deletions(-) -- Peter Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
2020-09-11ASoC: stm32: sai: add pm_runtime supportOlivier Moysan
Enable support of pm_runtime on STM32 SAI driver to allow SAI power state monitoring. pm_runtime_put_autosuspend() is called from ASoC framework on pcm device close. The pmdown_time delay is available in runtime context, and may be set in SAI driver to take into account shutdown delay on playback. However, this shutdown delay is already handled in the DAPMs of the audio codec linked to SAI CPU DAI. So, the choice is made, not to support this delay on CPU DAI side. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Link: https://lore.kernel.org/r/20200911081507.7276-1-olivier.moysan@st.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-11ALSA: rockchip_i2s: fix a possible divide-by-zero bug in ↵Tuo Li
rockchip_i2s_hw_params() The variable bclk_rate is checked in: if (bclk_rate && mclk_rate % bclk_rate) This indicates that bclk_rate can be zero. If so, a divide-by-zero bug will occur: div_bclk = mclk_rate / bclk_rate; To fix this possible bug, the function returns -EINVAL when bclk_rate is zero. Signed-off-by: Tuo Li <tuoli96@outlook.com> Link: https://lore.kernel.org/r/TY2PR04MB4029799E60A5BCAAD5B7B5BBB8280@TY2PR04MB4029.apcprd04.prod.outlook.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-11ASoC: SOF: Intel: Use DMI oem string search for tgl_max98373_rt5682Sathyanarayana Nujella
DMI product name is used to support system variants based out of tgl_max98373_rt5682 in current implementation. Replace this DMI search with DMI_OEM_STRING. Coreboot(BIOS used in these systems) is setting the needed DMI_OEM_STRING field to uniquely identify these systems. Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200910162705.2026036-1-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-11ASoC: SOF: Intel: hda-loader: s/master/primaryPierre-Louis Bossart
Use inclusive language for DSP cores. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Jaska Uimonen <jaska.uimonen@intel.com> Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200910164125.2033062-5-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-11ASoC: SOF: Intel: remove the HDA_DSP_CORE_MASK() macroRanjani Sridharan
Remove the HDA_DSP_CORE_MASK() macro and use BIT() and GENMASK() macros directly for more clarity. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Keyon Jie <yang.jie@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200910164125.2033062-4-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-11ASoC: SOF: Intel: hda: modify core_power_up/down opRanjani Sridharan
Modify the core_power_up/down ops for HDA platforms to restrict the core_mask to the ones allowed by chip->cores_mask. This is needed because on some HDA platforms not all cores can be powered up/down by the host and this must be handled internally in the FW. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Keyon Jie <yang.jie@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200910164125.2033062-3-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-11ASoC: SOF: rename cores_mask to host_managed_cores_maskRanjani Sridharan
Rename the cores_mask in struct sof_intel_dsp_desc to host_managed_cores_mask to be more indicative of the fact that only these cores can be powered up/down by the host. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@linux.intel.com> Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Reviewed-by: Keyon Jie <yang.jie@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200910164125.2033062-2-kai.vehmanen@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-11ASoC: ti: j721e-evm: Add support for j7200-cpb audioPeter Ujfalusi
When j7200 SOM is attached to the CPB we only have parent clock for 48KHz family and the rate of the parent clock is 2359296000Hz. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200910124110.19361-3-peter.ujfalusi@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-11ASoC: dt-bindings: ti, j721e-cpb-audio: Document support for j7200-cpbPeter Ujfalusi
j721e or j7200 SOM can be attached to the same Common Processor Board (CPB) With the j7200 SOM only the 48KHz family parent clock is available and McASP0 is used for the audio. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200910124110.19361-2-peter.ujfalusi@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-11ASoC: mediatek: mt8183-da7219: support machine driver with rt1015pTzung-Bi Shih
Supports machine driver with rt1015p ("mt8183_da7219_rt1015p"). Embeds in the existing mt8183-da7219-max98357.c because they share most of the code. Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20200911024833.1673961-3-tzungbi@google.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-11ASoC: dt-bindings: mt8183-da7219: add compatible string for using rt1015pTzung-Bi Shih
Machines with rt1015p should use the compatible string "mediatek,mt8183_da7219_rt1015p". Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20200911024833.1673961-2-tzungbi@google.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-10Merge series "ASoC: q6dsp: Add support to Codec Ports." from Srinivas ↵Mark Brown
Kandagatla <srinivas.kandagatla@linaro.org>: LPASS IP on SoCs like SM8250 has Digital Codec part integrated into it. This ports are exposed in Q6DSP as Codec ports. This patchset adds support to those q6afe ports along with q6routing and q6afe-dai. This patchset has been tested along with other patches on Qualcomm Robotics RB5 Platform with Soundwire and WSA8815 Codec. Thanks, srini Srinivas Kandagatla (8): ASoC: q6dsp: q6afe: add support to Codec DMA ports ASoC: q6dsp: q6routing: add support to Codec DMA ports ASoC: q6dsp: q6afe: prepare afe_apr_send_pkt to take response opcode ASoC: q6dsp: q6afe: add global q6afe waitqueue ASoC: q6dsp: q6afe: add lpass hw voting support ASoC: q6dsp: q6afe: update q6afe_set_param to support global clocks ASoC: q6dsp: q6afe: add codec lpass clocks ASoC: q6dsp: q6afe-dai: add support to Codec DMA ports include/dt-bindings/sound/qcom,q6afe.h | 22 ++ sound/soc/qcom/qdsp6/q6afe-dai.c | 229 ++++++++++++++++++ sound/soc/qcom/qdsp6/q6afe.c | 308 +++++++++++++++++++++++-- sound/soc/qcom/qdsp6/q6afe.h | 33 ++- sound/soc/qcom/qdsp6/q6routing.c | 121 +++++++++- 5 files changed, 689 insertions(+), 24 deletions(-) -- 2.21.0
2020-09-10ASoC: q6dsp: q6afe-dai: add support to Codec DMA portsSrinivas Kandagatla
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200910101732.23484-9-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-10ASoC: q6dsp: q6afe: add codec lpass clocksSrinivas Kandagatla
LPASS now has integrated codec control whose clocks are controlled by Q6DSP. This patch adds support to those clocks. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200910101732.23484-8-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-10ASoC: q6dsp: q6afe: update q6afe_set_param to support global clocksSrinivas Kandagatla
Previously there was no case where we need to set clock or send commands that are not associated with q6afe ports, now we have cases like clock voting and clock consumers like codecs that needed these clocks. update q6afe_set_param() to support such cases, including token passing. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200910101732.23484-7-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-10ASoC: q6dsp: q6afe: add lpass hw voting supportSrinivas Kandagatla
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200910101732.23484-6-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-10ASoC: q6dsp: q6afe: add global q6afe waitqueueSrinivas Kandagatla
In some cases like clocks q6afe would have to process commands without an associated q6afe port, in such cases waitqueue is required at global level to wait for the command to finish. This patch also adds the command result to go with this waitqueue. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200910101732.23484-5-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 10:33:25 +0000