| Age | Commit message (Collapse) | Author |
|---|
|
Simplify tablet-mode-switch handling:
1. The code is the same for all variants, the only difference is the
dev_id and notify event code. Store the dev_id + code in struct asus_wmi
and unify the handling
2. Make the new unified asus_wmi_tablet_mode_get_state() check dev_id has
been set and make it a no-op when not set. This allows calling it
unconditionally at resume/restore time
3. Simplify the tablet_mode_sw module-param handling, this also allows
selecting the new lid-flip-rog type through the module-param.
Cc: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220824151145.1448010-2-hdegoede@redhat.com
|
|
The 3 different tablet-mode-switch initialization paths repeat a lot
of the same code. Add a helper function for this.
This also makes the error-handling for the kbd_dock_devid case consistent
with the other 2 cases.
Cc: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220824151145.1448010-1-hdegoede@redhat.com
|
|
Add quirk for ASUS ROG X13 Flow 2-in-1 to enable tablet mode with
lid flip (all screen rotations).
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20220813092753.6635-2-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Due to multiple types of tablet/lidflip, the existing code for
handling these events is refactored to use an enum for each type.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20220813092753.6635-1-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Support the hardware GPU MUX switch available on some models. This
switch can toggle the MUX between:
- 0, Dedicated mode
- 1, Optimus mode
Optimus mode is the regular iGPU + dGPU available, while dedicated
mode switches the system to have only the dGPU available.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20220813092624.6228-1-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
After the recent cleanup patches, some of the *_check_present() helpers
just propagate the result of asus_wmi_dev_is_present().
Replace these with direct asus_wmi_dev_is_present() calls as a further
cleanup.
Cc: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220815150538.474306-1-hdegoede@redhat.com
|
|
The settings for these attributes can be read from the device, this
is now done instead of reading a stored value from module. The stored
value is also removed.
This means the simpler asus_wmi_dev_is_present() can be used in
*_check_present() - it is not an error for these methods to be
missing.
The _write() functions have their bodies shifted in to *_store()
which simplifies things further.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20220812222509.292692-7-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The settings for these attributes can be read from the device, this
is now done instead of reading a stored value from module. The stored
value is also removed.
This means the simpler asus_wmi_dev_is_present() can be used in
*_check_present() - it is not an error for these methods to be
missing.
The _write() functions have their bodies shifted in to *_store()
which simplifies things further.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20220812222509.292692-6-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The settings for these attributes can be read from the device, this
is now done instead of reading a stored value from module. The stored
value is also removed.
This means the simpler asus_wmi_dev_is_present() can be used in
*_check_present() - it is not an error for these methods to be
missing.
The _write() functions have their bodies shifted in to *_store()
which simplifies things further.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20220812222509.292692-5-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The panel_od attribute was not documented, this adds the
required documentation.
Fixes: ca91ea34778f ("asus-wmi: Add panel overdrive functionality")
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20220812222509.292692-4-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The egpu_enable attribute was not documented, this adds the
required documentation.
Fixes: 382b91db8044 ("asus-wmi: Add egpu enable method")
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20220812222509.292692-3-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The dgpu_disable attribute was not documented, this adds the
required documentation.
Fixes: 98829e84dc67 ("asus-wmi: Add dgpu disable method")
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20220812222509.292692-2-luke@ljones.dev
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Use kobj_to_dev() instead of open-coding it.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/20220811013203.16010-1-ye.xingchen@zte.com.cn
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This changes all *_show attributes in asus-wmi.c to use sysfs_emit()
instead of the older method of writing to the output buffer manually.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220809025054.1626339-6-luke@ljones.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
client to SP8
Add software nodes for the HID sensor collection and the UCM UCSI HID
client to the Surface Pro 8. In contrast to the type-cover devices,
these devices are directly attached to the SAM controller, without any
hub.
This enables support for HID-based sensors, including the ones used for
automatic screen rotation, on the Surface Pro 8.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220810144117.493710-4-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
findings
On Windows, the HID devices with target ID 1 are grouped as "Surface Hot
Plug - SAM". Rename their device nodes in the registry to reflect that
and update the comments accordingly.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220810144117.493710-3-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
their function
Rename HID device nodes based on their function. In particular, these
are nodes for firmware updates via the CFU mechanism (component firmware
update), HID based sensors, and a USB-C UCSI client.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220810144117.493710-2-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The Surface Laptop Go 2 seems to have the same SAM client devices as the
Surface Laptop Go 1, so re-use its node group.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20220810140133.99087-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Windows BIOS
The x86-android-tablets handling for the Chuwi Hi8 is only necessary with
the Android BIOS and it is causing problems with the Windows BIOS version.
Specifically when trying to register the already present touchscreen
x86_acpi_irq_helper_get() calls acpi_unregister_gsi(), this breaks
the working of the touchscreen and also leads to an oops:
[ 14.248946] ------------[ cut here ]------------
[ 14.248954] remove_proc_entry: removing non-empty directory 'irq/75', leaking at least 'MSSL0001:00'
[ 14.248983] WARNING: CPU: 3 PID: 440 at fs/proc/generic.c:718 remove_proc_entry
...
[ 14.249293] unregister_irq_proc+0xe0/0x100
[ 14.249305] free_desc+0x29/0x70
[ 14.249312] irq_free_descs+0x4b/0x80
[ 14.249320] mp_unmap_irq+0x5c/0x60
[ 14.249329] acpi_unregister_gsi_ioapic+0x2a/0x40
[ 14.249338] x86_acpi_irq_helper_get+0x4b/0x190 [x86_android_tablets]
[ 14.249355] x86_android_tablet_init+0x178/0xe34 [x86_android_tablets]
Add an init callback for the Chuwi Hi8, which detects when the Windows BIOS
is in use and exits with -ENODEV in that case, fixing this.
Fixes: 84c2dcdd475f ("platform/x86: x86-android-tablets: Add an init() callback to struct x86_dev_info")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220810141934.140771-1-hdegoede@redhat.com
|
|
The style of the comments is not uniform, make it so and fix
a few grammar issues. While at it, update Copyright years.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220801113734.36131-4-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Make terminator entry uniform by dropping:
- trailing commas
- anything inside curly braces
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220801113734.36131-3-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Not everyone can get what "critclks" means in the message, improve
it to make less cryptic.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220801113734.36131-2-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
On Intel hardware the SLP_TYPx bitfield occupies bits 10-12 as per ACPI
specification (see Table 4.13 "PM1 Control Registers Fixed Hardware
Feature Control Bits" for the details).
Fix the mask and other related definitions accordingly.
Fixes: 93e5eadd1f6e ("x86/platform: New Intel Atom SOC power management controller driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220801113734.36131-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The driver core supports the ability to handle the creation and removal
of device-specific sysfs files in a race-free manner. Take advantage of
that by converting this driver to use this by moving the sysfs
attributes into a group and assigning the dev_groups pointer to it.
Cc: Perry Yuan <Perry.Yuan@dell.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Mark Gross <markgross@kernel.org>
Cc: Dell.Client.Kernel@dell.com
Cc: platform-driver-x86@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220729115302.2258296-1-gregkh@linuxfoundation.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
|
|
Before this commit when we want userspace to use the acpi_video backlight
device we register both the GPU's native backlight device and acpi_video's
firmware acpi_video# backlight device. This relies on userspace preferring
firmware type backlight devices over native ones.
Registering 2 backlight devices for a single display really is
undesirable, don't register the GPU's native backlight device when
another backlight device should be used.
Changes in v2:
- To avoid linker errors when amdgpu is builtin and video_detect.c is in
a module, select ACPI_VIDEO and its deps if ACPI is enabled.
When ACPI is disabled, ACPI_VIDEO is also always disabled, ensuring
the stubs from acpi/video.h will be used.
Changes in v3:
- Use drm_info(drm_dev, "...") to log messages
- ACPI_VIDEO can now be enabled on non X86 too,
adjust the Kconfig changes to match this.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Before this commit when we want userspace to use the acpi_video backlight
device we register both the GPU's native backlight device and acpi_video's
firmware acpi_video# backlight device. This relies on userspace preferring
firmware type backlight devices over native ones.
Registering 2 backlight devices for a single display really is
undesirable, don't register the GPU's native backlight device when
another backlight device should be used.
Changes in v2:
- To avoid linker errors when amdgpu is builtin and video_detect.c is in
a module, select ACPI_VIDEO and its deps if ACPI is enabled.
When ACPI is disabled, ACPI_VIDEO is also always disabled, ensuring
the stubs from acpi/video.h will be used.
Changes in v3:
- Use drm_info(drm_dev, "...") to log messages
- ACPI_VIDEO can now be enabled on non X86 too,
adjust the Kconfig changes to match this.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Before this commit when we want userspace to use the acpi_video backlight
device we register both the GPU's native backlight device and acpi_video's
firmware acpi_video# backlight device. This relies on userspace preferring
firmware type backlight devices over native ones.
Registering 2 backlight devices for a single display really is
undesirable, don't register the GPU's native backlight device when
another backlight device should be used.
Changes in v2:
- Use drm_info(drm_dev, ...) for log messages
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
variable 'mode' is used uninitialized whenever switch default is taken
in sps.c which leads to the following clang warning.
drivers/platform/x86/amd/pmf/sps.c:96:2: error: variable 'mode' is used uninitialized whenever switch default is taken [-Werror,-Wsometimes-uninitialized]
default:
^~~~~~~
drivers/platform/x86/amd/pmf/sps.c:101:9: note: uninitialized use occurs here
return mode;
^~~~
drivers/platform/x86/amd/pmf/sps.c:84:9: note: initialize the variable 'mode' to silence this warning
u8 mode;
^
= '\0'
1 error generated.
Fix it by returning -EOPNOTSUPP in default case and also change the return
type of the function amd_pmf_get_pprof_modes() to keep it similar like
other drivers which implement platform_profile.
Fixes: 4c71ae414474 ("platform/x86/amd/pmf: Add support SPS PMF feature")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220822062917.4061503-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Its reported that amd-pmf driver when built with config which does not
have ACPI_PLATFORM_PROFILE set/enabled throws a undefined references to
symbols used.
ld: vmlinux.o: in function `amd_pmf_init_sps':
drivers/platform/x86/amd/pmf/sps.c:132: undefined reference to `platform_profile_register'
ld: vmlinux.o: in function `amd_pmf_deinit_sps':
drivers/platform/x86/amd/pmf/sps.c:142: undefined reference to `platform_profile_remove'
Fix it by adding a "select" to the Kconfig.
Fixes: da5ce22df5fe ("platform/x86/amd/pmf: Add support for PMF core layer")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20220819083858.3987590-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
ATM on x86 laptops where we want userspace to use the acpi_video backlight
device we often register both the GPU's native backlight device and
acpi_video's firmware acpi_video# backlight device. This relies on
userspace preferring firmware type backlight devices over native ones, but
registering 2 backlight devices for a single display really is undesirable.
On x86 laptops where the native GPU backlight device should be used,
the registering of other backlight devices is avoided by their drivers
using acpi_video_get_backlight_type() and only registering their backlight
if the return value matches their type.
acpi_video_get_backlight_type() uses
backlight_device_get_by_type(BACKLIGHT_RAW) to determine if a native
driver is available and will never return native if this returns
false. This means that the GPU's native backlight registering code
cannot just call acpi_video_get_backlight_type() to determine if it
should register its backlight, since acpi_video_get_backlight_type() will
never return native until the native backlight has already registered.
To fix this add a new internal native function parameter to
acpi_video_get_backlight_type(), which when set to true will make
acpi_video_get_backlight_type() behave as if a native backlight has
already been registered.
And add a new acpi_video_backlight_use_native() helper, which sets this
to true, for use in native GPU backlight code.
Changes in v2:
- Replace adding a native parameter to acpi_video_get_backlight_type() with
adding a new acpi_video_backlight_use_native() helper.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Update the MAINTAINERS file with AMD PMF driver details.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-12-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Some of the older platforms with _HID "AMDI0100" PMF driver can be force
loaded by interested users but only for experimental purposes.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-11-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The transition to auto-mode happens when the PMF driver receives
AMT (Auto Mode transition) event. transition logic will reside in the
PMF driver but the events would come from other supported drivers[1].
The thermal parameters would vary between when a performance "on-lap" mode
is detected and versus when not. The CQL event would get triggered from
other drivers, so that PMF driver would adjust the system thermal config
based on the ACPI inputs.
OEMs can control whether or not to enable AMT or CQL via other supported
drivers[1] but the actual transition logic resides in the AMD PMF driver.
When an AMT event is received the automatic mode transition RAPL algorithm
will run. When a CQL event is received an performance "on-lap" mode will
be enabled and thermal parameters will be adjusted accordingly.
[1]
Link: https://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/commit/?h=review-hans&id=755b249250df1b612d982f3b702c831b26ecdf73
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-10-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
This feature has 3 modes quiet, balanced, performance
The objective of this feature is to track the moving average of system
power over the time period specified and switch to the subsequent mode.
In order to do this, PMF driver will get the moving average of APU power
from PMFW and power threshold, time constants, system config parameters
from OEM inputs.
System power as read by PMF driver from PMFW is the filtered value over
the sampling window. Every sampling window, moving average of system power
is computed. At the end of the monitoring window, the moving average is
compared against the threshold for mode switch for decision making.
With AMD managing the system config limits, any mode switch within
auto-mode will result in limits of fPPT/sPPT/STAPM or STT being scaled
down.
When "auto mode" is enabled, the static slider control remains out of
the PMF driver, so the platform_profile registration would not
happen in PMF driver.
The transition to auto-mode only happens when the APMF fn5 is enabled
in BIOS, platform_profile set to "balanced" and a AMT
(Auto Mode transition) is received.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-9-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
PMF driver polls for metrics information from PMFW to understand the system
behavior, power consumption etc.
This metrics table information will be used the PMF features to tweak the
thermal heuristics. The poll duration can also be changed by the user
by changing the poll duration time.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-8-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
PMF has a generic interface defined via PMF ACPI fn9 for influencing fan
policy during mode switch.
PMF ACPI fn9 will normally be invoked when AMDPMF needs to change the fan
table index for the EC. When AMDPMF is loaded this function will be invoked
to change fan speed. OEM can also choose to report the actual fan table
index and fan RPM to PMF through OEM structure.
This information will be communicated by PMF driver to customer BIOS.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-7-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
PMF driver can send periodic heartbeat signals to OEM BIOS. When BIOS does
not receive the signal after a period of time, it can infer that AMDPMF
has hung or failed to load.
In this situation, BIOS can fallback to legacy operations. OEM can modify
the time interval of the signal or completely disable signals through
ACPI Method.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-6-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
Add debugfs support to the PMF driver so that using this interface the
live counters from the PMFW can be queried to see if the power parameters
are getting set properly when a certain power mode change happens.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-5-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
SPS (a.k.a. Static Power Slider) gives a feel of Windows performance
power slider for the Linux users, where the user selects a certain
mode (like "balanced", "low-power" or "performance") and the thermals
associated with each selected mode gets applied from the silicon
side via the mailboxes defined through PMFW.
PMF driver hooks to platform_profile by reading the PMF ACPI fn9 to
see if the support is being advertised by ACPI interface.
If supported, the PMF driver reacts to platform_profile selection choices
made by the user and adjust the system thermal behavior.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-4-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
PMF driver implements the ACPI methods as defined by AMD for PMF Support.
The ACPI layer acts as a glue that helps in providing the infrastructure
for OEMs customization.
OEMs can refer to PMF support documentation to decide on the list of
functions to be supported on their specific platform model.
AMD mandates that PMF ACPI fn0 and fn1 to be implemented which
provides the set of functions, params and the notifications that
would be sent to PMF driver so that PMF driver can adapt and
react.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-3-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
PMF core layer is meant to abstract the common functionalities
across PMF features. This layer also does the plumbing work
like setting up the mailbox channel for the communication
between the PMF driver and the PMFW (Power Management Firmware)
running on the SMU.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20220802151149.2123699-2-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
|
|
Radix tree header includes gfp.h for __GFP_BITS_SHIFT only. Now we
have gfp_types.h for this.
Fixes powerpc allmodconfig build:
In file included from include/linux/nodemask.h:97,
from include/linux/mmzone.h:17,
from include/linux/gfp.h:7,
from include/linux/radix-tree.h:12,
from include/linux/idr.h:15,
from include/linux/kernfs.h:12,
from include/linux/sysfs.h:16,
from include/linux/kobject.h:20,
from include/linux/pci.h:35,
from arch/powerpc/kernel/prom_init.c:24:
include/linux/random.h: In function 'add_latent_entropy':
>> include/linux/random.h:25:46: error: 'latent_entropy' undeclared (first use in this function); did you mean 'add_latent_entropy'?
25 | add_device_randomness((const void *)&latent_entropy, sizeof(latent_entropy));
| ^~~~~~~~~~~~~~
| add_latent_entropy
include/linux/random.h:25:46: note: each undeclared identifier is reported only once for each function it appears in
Reported-by: kernel test robot <lkp@intel.com>
CC: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull vfs lseek fix from Al Viro:
"Fix proc_reg_llseek() breakage. Always had been possible if somebody
left NULL ->proc_lseek, became a practical issue now"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
take care to handle NULL ->proc_lseek()
|
|
Easily done now, just by clearing FMODE_LSEEK in ->f_mode
during proc_reg_open() for such entries.
Fixes: 868941b14441 "fs: remove no_llseek"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
- fix the handling of the "persistent grants" feature negotiation
between Xen blkfront and Xen blkback drivers
- a cleanup of xen.config and adding xen.config to Xen section in
MAINTAINERS
- support HVMOP_set_evtchn_upcall_vector, which is more compliant to
"normal" interrupt handling than the global callback used up to now
- further small cleanups
* tag 'for-linus-6.0-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
MAINTAINERS: add xen config fragments to XEN HYPERVISOR sections
xen: remove XEN_SCRUB_PAGES in xen.config
xen/pciback: Fix comment typo
xen/xenbus: fix return type in xenbus_file_read()
xen-blkfront: Apply 'feature_persistent' parameter when connect
xen-blkback: Apply 'feature_persistent' parameter when connect
xen-blkback: fix persistent grants negotiation
x86/xen: Add support for HVMOP_set_evtchn_upcall_vector
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tool updates from Arnaldo Carvalho de Melo:
- 'perf c2c' now supports ARM64, adjust its output to cope with
differences with what is in x86_64. Now go find false sharing on
ARM64 (at least Neoverse) as well!
- Refactor the JSON processing, making the output more compact and thus
reducing the size of the resulting perf binary
- Improvements for 'perf offcpu' profiling, including tracking child
processes
- Update Intel JSON metrics and events files for broadwellde,
broadwellx, cascadelakex, haswellx, icelakex, ivytown, jaketown,
knightslanding, sapphirerapids, skylakex and snowridgex
- Add 'perf stat' JSON output and a 'perf test' entry for it
- Ignore memfd and anonymous mmap events if jitdump present
- Refactor 'perf test' shell tests allowing subdirs
- Fix an error handling path in 'parse_perf_probe_command()'
- Fixes for the guest Intel PT tracing patchkit in the 1st batch of
this merge window
- Print debuginfod queries if -v option is used, to explain delays in
processing when debuginfo servers are enabled to fetch DSOs with
richer symbol tables
- Improve error message for 'perf record -p not_existing_pid'
- Fix openssl and libbpf feature detection
- Add PMU pai_crypto event description for IBM z16 on 'perf list'
- Fix typos and duplicated words on comments in various places
* tag 'perf-tools-fixes-for-v6.0-2022-08-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (81 commits)
perf test: Refactor shell tests allowing subdirs
perf vendor events: Update events for snowridgex
perf vendor events: Update events and metrics for skylakex
perf vendor events: Update metrics for sapphirerapids
perf vendor events: Update events for knightslanding
perf vendor events: Update metrics for jaketown
perf vendor events: Update metrics for ivytown
perf vendor events: Update events and metrics for icelakex
perf vendor events: Update events and metrics for haswellx
perf vendor events: Update events and metrics for cascadelakex
perf vendor events: Update events and metrics for broadwellx
perf vendor events: Update metrics for broadwellde
perf jevents: Fold strings optimization
perf jevents: Compress the pmu_events_table
perf metrics: Copy entire pmu_event in find metric
perf pmu-events: Hide the pmu_events
perf pmu-events: Don't assume pmu_event is an array
perf pmu-events: Move test events/metrics to JSON
perf test: Use full metric resolution
perf pmu-events: Hide pmu_events_map
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Ensure we never emit lwarx with EH=1 on 32-bit, because some 32-bit
CPUs trap on it rather than ignoring it as they should.
- Fix ftrace when building with clang, which was broken by some
refactoring.
- A couple of other minor fixes.
Thanks to Christophe Leroy, Naveen N. Rao, Nick Desaulniers, Ondrej
Mosnacek, Pali Rohár, Russell Currey, and Segher Boessenkool.
* tag 'powerpc-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/kexec: Fix build failure from uninitialised variable
powerpc/ppc-opcode: Fix PPC_RAW_TW()
powerpc64/ftrace: Fix ftrace for clang builds
powerpc: Make eh value more explicit when using lwarx
powerpc: Don't hide eh field of lwarx behind a macro
powerpc: Fix eh field when calling lwarx on PPC32
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull /proc/mounts fix from Al Viro:
"Fix for /proc/mounts escaping - escape the '#' character too"
* tag 'pull-work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: escape hash as well
|
