| Age | Commit message (Collapse) | Author |
|---|
|
The first field in /proc/mounts can be influenced by unprivileged users
through the widespread `fusermount` setuid-root program. Example:
```
user$ mkdir ~/mydebugfs
user$ export _FUSE_COMMFD=0
user$ fusermount ~/mydebugfs -ononempty,fsname=debugfs
user$ grep debugfs /proc/mounts
debugfs /home/user/mydebugfs fuse rw,nosuid,nodev,relatime,user_id=1000,group_id=100 0 0
```
If there is no debugfs already mounted in the system then this can be
used by unprivileged users to trick kvm_stat into using a user
controlled file system location for obtaining KVM statistics.
Even though the root user is not allowed to access non-root FUSE mounts
for security reasons, the unprivileged user can unmount the FUSE mount
before kvm_stat uses the mounted path. If it wins the race, kvm_stat
will read from the location where the FUSE mount resided.
Note that the files in debugfs are only opened for reading, so the
attacker can cause very large data to be read in by kvm_stat, or fake
data to be processed, but there should be no viable way to turn this
into a privilege escalation.
The fix is simply to use the file system type field instead. Whitespace
in the mount path is escaped in /proc/mounts thus no further safety
measures in the parsing should be necessary to make this correct.
Message-Id: <20221103135927.13656-1-matthias.gerstner@suse.de>
Signed-off-by: Matthias Gerstner <matthias.gerstner@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
x86_virt_spec_ctrl only deals with the paravirtualized
MSR_IA32_VIRT_SPEC_CTRL now and does not handle MSR_IA32_SPEC_CTRL
anymore; remove the corresponding, unused argument.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Restoration of the host IA32_SPEC_CTRL value is probably too late
with respect to the return thunk training sequence.
With respect to the user/kernel boundary, AMD says, "If software chooses
to toggle STIBP (e.g., set STIBP on kernel entry, and clear it on kernel
exit), software should set STIBP to 1 before executing the return thunk
training sequence." I assume the same requirements apply to the guest/host
boundary. The return thunk training sequence is in vmenter.S, quite close
to the VM-exit. On hosts without V_SPEC_CTRL, however, the host's
IA32_SPEC_CTRL value is not restored until much later.
To avoid this, move the restoration of host SPEC_CTRL to assembly and,
for consistency, move the restoration of the guest SPEC_CTRL as well.
This is not particularly difficult, apart from some care to cover both
32- and 64-bit, and to share code between SEV-ES and normal vmentry.
Cc: stable@vger.kernel.org
Fixes: a149180fbcf3 ("x86: Add magic AMD return-thunk")
Suggested-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Allow access to the percpu area via the GS segment base, which is
needed in order to access the saved host spec_ctrl value. In linux-next
FILL_RETURN_BUFFER also needs to access percpu data.
For simplicity, the physical address of the save area is added to struct
svm_cpu_data.
Cc: stable@vger.kernel.org
Fixes: a149180fbcf3 ("x86: Add magic AMD return-thunk")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Analyzed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
It is error-prone that code after vmexit cannot access percpu data
because GSBASE has not been restored yet. It forces MSR_IA32_SPEC_CTRL
save/restore to happen very late, after the predictor untraining
sequence, and it gets in the way of return stack depth tracking
(a retbleed mitigation that is in linux-next as of 2022-11-09).
As a first step towards fixing that, move the VMCB VMSAVE/VMLOAD to
assembly, essentially undoing commit fb0c4a4fee5a ("KVM: SVM: move
VMLOAD/VMSAVE to C code", 2021-03-15). The reason for that commit was
that it made it simpler to use a different VMCB for VMLOAD/VMSAVE versus
VMRUN; but that is not a big hassle anymore thanks to the kvm-asm-offsets
machinery and other related cleanups.
The idea on how to number the exception tables is stolen from
a prototype patch by Peter Zijlstra.
Cc: stable@vger.kernel.org
Fixes: a149180fbcf3 ("x86: Add magic AMD return-thunk")
Link: <https://lore.kernel.org/all/f571e404-e625-bae1-10e9-449b2eb4cbd8@citrix.com/>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The svm_data percpu variable is a pointer, but it is allocated via
svm_hardware_setup() when KVM is loaded. Unlike hardware_enable()
this means that it is never NULL for the whole lifetime of KVM, and
static allocation does not waste any memory compared to the status quo.
It is also more efficient and more easily handled from assembly code,
so do it and don't look back.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The "cpu" field of struct svm_cpu_data has been write-only since commit
4b656b120249 ("KVM: SVM: force new asid on vcpu migration", 2009-08-05).
Remove it.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The pointer to svm_cpu_data in struct vcpu_svm looks interesting from
the point of view of accessing it after vmexit, when the GSBASE is still
containing the guest value. However, despite existing since the very
first commit of drivers/kvm/svm.c (commit 6aa8b732ca01, "[PATCH] kvm:
userspace interface", 2006-12-10), it was never set to anything.
Ignore the opportunity to fix a 16 year old "bug" and delete it; doing
things the "harder" way makes it possible to remove more old cruft.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Continue moving accesses to struct vcpu_svm to vmenter.S. Reducing the
number of arguments limits the chance of mistakes due to different
registers used for argument passing in 32- and 64-bit ABIs; pushing the
VMCB argument and almost immediately popping it into a different
register looks pretty weird.
32-bit ABI is not a concern for __svm_sev_es_vcpu_run() which is 64-bit
only; however, it will soon need @svm to save/restore SPEC_CTRL so stay
consistent with __svm_vcpu_run() and let them share the same prototype.
No functional change intended.
Cc: stable@vger.kernel.org
Fixes: a149180fbcf3 ("x86: Add magic AMD return-thunk")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
32-bit ABI uses RAX/RCX/RDX as its argument registers, so they are in
the way of instructions that hardcode their operands such as RDMSR/WRMSR
or VMLOAD/VMRUN/VMSAVE.
In preparation for moving vmload/vmsave to __svm_vcpu_run(), keep
the pointer to the struct vcpu_svm in %rdi. In particular, it is now
possible to load svm->vmcb01.pa in %rax without clobbering the struct
vcpu_svm pointer.
No functional change intended.
Cc: stable@vger.kernel.org
Fixes: a149180fbcf3 ("x86: Add magic AMD return-thunk")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Since registers are reachable through vcpu_svm, and we will
need to access more fields of that struct, pass it instead
of the regs[] array.
No functional change intended.
Cc: stable@vger.kernel.org
Fixes: a149180fbcf3 ("x86: Add magic AMD return-thunk")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This already removes an ugly #include "" from asm-offsets.c, but
especially it avoids a future error when trying to define asm-offsets
for KVM's svm/svm.h header.
This would not work for kernel/asm-offsets.c, because svm/svm.h
includes kvm_cache_regs.h which is not in the include path when
compiling asm-offsets.c. The problem is not there if the .c file is
in arch/x86/kvm.
Suggested-by: Sean Christopherson <seanjc@google.com>
Cc: stable@vger.kernel.org
Fixes: a149180fbcf3 ("x86: Add magic AMD return-thunk")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pablo Neira Ayuso says:
====================
The following patchset contains Netfilter fixes for net:
1) Fix deadlock in nfnetlink due to missing mutex release in error path,
from Ziyang Xuan.
2) Clean up pending autoload module list from nf_tables_exit_net() path,
from Shigeru Yoshida.
3) Fixes for the netfilter's reverse path selftest, from Phil Sutter.
All of these bugs have been around for several releases.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the R-Car MIPI DSI driver was added, it was a standalone encoder
driver without any dependency to or from the R-Car DU driver. Commit
957fe62d7d15 ("drm: rcar-du: Fix DSI enable & disable sequence") then
added a direct call from the DU driver to the MIPI DSI driver, without
updating Kconfig to take the new dependency into account. Fix it the
same way that the LVDS encoder is handled.
Fixes: 957fe62d7d15 ("drm: rcar-du: Fix DSI enable & disable sequence")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
|
|
Although we don't use 1GB block mappings, we still need to split
map/unmap requests at 1GB boundaries to match what io-pgtable expects.
Fix that, and add some explanation to make sense of it all.
Fixes: 3740b081795a ("drm/panfrost: Update io-pgtable API")
Reported-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/49e54bb4019cd06e01549b106d7ac37c3d182cd3.1667927179.git.robin.murphy@arm.com
|
|
M Chetan Kumar says:
====================
net: wwan: iosm: fixes
This patch series contains iosm fixes.
PATCH1: Fix memory leak in ipc_pcie_read_bios_cfg.
PATCH2: Fix driver not working with INTEL_IOMMU disabled config.
PATCH3: Fix invalid mux header type.
PATCH4: Fix kernel build robot reported errors.
Please refer to individual commit message for details.
--
v2:
* PATCH1: No Change
* PATCH2: Kconfig change
- Add dependency on PCI to resolve kernel build robot errors.
* PATCH3: No Change
* PATCH4: New (Fix kernel build robot errors)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Include linux/vmalloc.h in iosm_ipc_coredump.c &
iosm_ipc_devlink.c to resolve kernel test robot errors.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Data stall seen during peak DL throughput test & packets are
dropped by mux layer due to invalid header type in datagram.
During initlization Mux aggregration protocol is set to default
UL/DL size and TD count of Mux lite protocol. This configuration
mismatch between device and driver is resulting in data stall/packet
drops.
Override the UL/DL size and TD count for Mux aggregation protocol.
Fixes: 1f52d7b62285 ("net: wwan: iosm: Enable M.2 7360 WWAN card support")
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With INTEL_IOMMU disable config or by forcing intel_iommu=off from
grub some of the features of IOSM driver like browsing, flashing &
coredump collection is not working.
When driver calls DMA API - dma_map_single() for tx transfers. It is
resulting in dma mapping error.
Set the device DMA addressing capabilities using dma_set_mask() and
remove the INTEL_IOMMU dependency in kconfig so that driver follows
the platform config either INTEL_IOMMU enable or disable.
Fixes: f7af616c632e ("net: iosm: infrastructure")
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ipc_pcie_read_bios_cfg() is using the acpi_evaluate_dsm() to
obtain the wwan power state configuration from BIOS but is
not freeing the acpi_object. The acpi_evaluate_dsm() returned
acpi_object to be freed.
Free the acpi_object after use.
Fixes: 7e98d785ae61 ("net: iosm: entry point")
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We need to also free the dhchap_ctrl_secret when releasing nvmet_host.
kmemleak complaint:
--
unreferenced object 0xffff99b1cbca5140 (size 64):
comm "check", pid 4864, jiffies 4305092436 (age 2913.583s)
hex dump (first 32 bytes):
44 48 48 43 2d 31 3a 30 30 3a 65 36 2b 41 63 44 DHHC-1:00:e6+AcD
39 76 47 4d 52 57 59 78 67 54 47 44 51 59 47 78 9vGMRWYxgTGDQYGx
backtrace:
[<00000000c07d369d>] kstrdup+0x2e/0x60
[<000000001372171c>] 0xffffffffc0cceec6
[<0000000010dbf50b>] 0xffffffffc0cc6783
[<000000007465e93c>] configfs_write_iter+0xb1/0x120
[<0000000039c23f62>] vfs_write+0x2be/0x3c0
[<000000002da4351c>] ksys_write+0x5f/0xe0
[<00000000d5011e32>] do_syscall_64+0x38/0x90
[<00000000503870cf>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: db1312dd9548 ("nvmet: implement basic In-Band Authentication")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Since model_number is allocated before it needs to be freed before
kmemdump_nul.
Reviewed-by: Konstantin Shelekhin <k.shelekhin@yadro.com>
Reviewed-by: Dmitriy Bogdanov <d.bogdanov@yadro.com>
Signed-off-by: Aleksandr Miloserdov <a.miloserdov@yadro.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The driver is spamming the kernel logs for entirely harmless errors from
user space submitting unsupported commands. Just silence the errors.
The application has direct access to command status, so there's no need
to log these.
And since every passthrough command now uses the quiet flag, move the
setting to the common initializer.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Alan Adamson <alan.adamson@oracle.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Tested-by: Alan Adamson <alan.adamson@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
MMC_CAP_8_BIT_DATA belongs to struct mmc_host, not struct sdhci_host.
So correct it here.
Fixes: 1ed5c3b22fc7 ("mmc: sdhci-esdhc-imx: Propagate ESDHC_FLAG_HS400* only on 8bit bus")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Cc: stable@vger.kernel.org
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/1667893503-20583-1-git-send-email-haibo.chen@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Syzbot reported a slab-out-of-bounds Write bug:
loop0: detected capacity change from 0 to 2048
==================================================================
BUG: KASAN: slab-out-of-bounds in udf_find_entry+0x8a5/0x14f0
fs/udf/namei.c:253
Write of size 105 at addr ffff8880123ff896 by task syz-executor323/3610
CPU: 0 PID: 3610 Comm: syz-executor323 Not tainted
6.1.0-rc2-syzkaller-00105-gb229b6ca5abb #0
Hardware name: Google Compute Engine/Google Compute Engine, BIOS
Google 10/11/2022
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106
print_address_description+0x74/0x340 mm/kasan/report.c:284
print_report+0x107/0x1f0 mm/kasan/report.c:395
kasan_report+0xcd/0x100 mm/kasan/report.c:495
kasan_check_range+0x2a7/0x2e0 mm/kasan/generic.c:189
memcpy+0x3c/0x60 mm/kasan/shadow.c:66
udf_find_entry+0x8a5/0x14f0 fs/udf/namei.c:253
udf_lookup+0xef/0x340 fs/udf/namei.c:309
lookup_open fs/namei.c:3391 [inline]
open_last_lookups fs/namei.c:3481 [inline]
path_openat+0x10e6/0x2df0 fs/namei.c:3710
do_filp_open+0x264/0x4f0 fs/namei.c:3740
do_sys_openat2+0x124/0x4e0 fs/open.c:1310
do_sys_open fs/open.c:1326 [inline]
__do_sys_creat fs/open.c:1402 [inline]
__se_sys_creat fs/open.c:1396 [inline]
__x64_sys_creat+0x11f/0x160 fs/open.c:1396
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7ffab0d164d9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89
f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01
f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffe1a7e6bb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000055
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ffab0d164d9
RDX: 00007ffab0d164d9 RSI: 0000000000000000 RDI: 0000000020000180
RBP: 00007ffab0cd5a10 R08: 0000000000000000 R09: 0000000000000000
R10: 00005555573552c0 R11: 0000000000000246 R12: 00007ffab0cd5aa0
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Allocated by task 3610:
kasan_save_stack mm/kasan/common.c:45 [inline]
kasan_set_track+0x3d/0x60 mm/kasan/common.c:52
____kasan_kmalloc mm/kasan/common.c:371 [inline]
__kasan_kmalloc+0x97/0xb0 mm/kasan/common.c:380
kmalloc include/linux/slab.h:576 [inline]
udf_find_entry+0x7b6/0x14f0 fs/udf/namei.c:243
udf_lookup+0xef/0x340 fs/udf/namei.c:309
lookup_open fs/namei.c:3391 [inline]
open_last_lookups fs/namei.c:3481 [inline]
path_openat+0x10e6/0x2df0 fs/namei.c:3710
do_filp_open+0x264/0x4f0 fs/namei.c:3740
do_sys_openat2+0x124/0x4e0 fs/open.c:1310
do_sys_open fs/open.c:1326 [inline]
__do_sys_creat fs/open.c:1402 [inline]
__se_sys_creat fs/open.c:1396 [inline]
__x64_sys_creat+0x11f/0x160 fs/open.c:1396
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The buggy address belongs to the object at ffff8880123ff800
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 150 bytes inside of
256-byte region [ffff8880123ff800, ffff8880123ff900)
The buggy address belongs to the physical page:
page:ffffea000048ff80 refcount:1 mapcount:0 mapping:0000000000000000
index:0x0 pfn:0x123fe
head:ffffea000048ff80 order:1 compound_mapcount:0 compound_pincount:0
flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000010200 ffffea00004b8500 dead000000000003 ffff888012041b40
raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 0, migratetype Unmovable, gfp_mask 0x0(),
pid 1, tgid 1 (swapper/0), ts 1841222404, free_ts 0
create_dummy_stack mm/page_owner.c:67 [inline]
register_early_stack+0x77/0xd0 mm/page_owner.c:83
init_page_owner+0x3a/0x731 mm/page_owner.c:93
kernel_init_freeable+0x41c/0x5d5 init/main.c:1629
kernel_init+0x19/0x2b0 init/main.c:1519
page_owner free stack trace missing
Memory state around the buggy address:
ffff8880123ff780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8880123ff800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff8880123ff880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06
^
ffff8880123ff900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8880123ff980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Fix this by changing the memory size allocated for copy_name from
UDF_NAME_LEN(254) to UDF_NAME_LEN_CS0(255), because the total length
(lfi) of subsequent memcpy can be up to 255.
CC: stable@vger.kernel.org
Reported-by: syzbot+69c9fdccc6dd08961d34@syzkaller.appspotmail.com
Fixes: 066b9cded00b ("udf: Use separate buffer for copying split names")
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221109013542.442790-1-zhangpeng362@huawei.com
|
|
Add the same change for ARM64 as done in the commit 9440c4294160
("x86/syscall: Include asm/ptrace.h in syscall_wrapper header") to
make sure all syscalls see 'struct pt_regs' definition and resulted
BTF for '__arm64_sys_*(struct pt_regs *regs)' functions point to
actual struct.
Without this patch, the BPF verifier refuses to load a tracing prog
which accesses pt_regs.
bpf(BPF_PROG_LOAD, {prog_type=0x1a, ...}, 128) = -1 EACCES
With this patch, we can see the correct error, which saves us time
in debugging the prog.
bpf(BPF_PROG_LOAD, {prog_type=0x1a, ...}, 128) = 4
bpf(BPF_RAW_TRACEPOINT_OPEN, {raw_tracepoint={name=NULL, prog_fd=4}}, 128) = -1 ENOTSUPP
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221031215728.50389-1-kuniyu@amazon.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
CONFIG_UBSAN_SHIFT with gcc-5 complains that the shifting of
ARM_CPU_IMP_AMPERE (0xC0) into bits [31:24] by MIDR_CPU_MODEL() is
undefined behavior. Well, sort of, it actually spells the error as:
arch/arm64/kernel/proton-pack.c: In function 'spectre_bhb_loop_affected':
arch/arm64/include/asm/cputype.h:44:2: error: initializer element is not constant
(((imp) << MIDR_IMPLEMENTOR_SHIFT) | \
^
This isn't an issue for other Implementor codes, as all the other codes
have zero in the top bit and so are representable as a signed int.
Cast the implementor code to unsigned in MIDR_CPU_MODEL to remove the
undefined behavior.
Fixes: 0e5d5ae837c8 ("arm64: Add AMPERE1 to the Spectre-BHB affected list")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: D Scott Phillips <scott@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20221102160106.1096948-1-scott@os.amperecomputing.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Address a few problems with the initial test script version:
* On systems with ip6tables but no ip6tables-legacy, testing for
ip6tables was disabled by accident.
* Firewall setup phase did not respect possibly unavailable tools.
* Consistently call nft via '$nft'.
Fixes: 6e31ce831c63b ("selftests: netfilter: Test reverse path filtering")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Accuphase DAC-60 option card supports native DSD up to DSD256,
but doesn't have support for auto-detection. Explicitly enable
DSD support for the correct altsetting.
Signed-off-by: Jussi Laako <jussi@sonarnerd.net>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221108221241.1220878-1-jussi@sonarnerd.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Previously, the default number of transmit queues was 16. Due to
resource concerns, set to 8 queues instead. Still allow the user
to set more queues (max 16) if they like.
Since the driver is virtualized away from the physical NIC, the purpose
of multiple queues is purely to allow for parallel calls to the
hypervisor. Therefore, there is no noticeable effect on performance by
reducing queue count to 8.
Fixes: d926793c1de9 ("ibmveth: Implement multi queue on xmit")
Reported-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Link: https://lore.kernel.org/r/20221107203215.58206-1-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When failed to enable interrupts in nixge_open() for opening device,
napi isn't disabled. When open nixge device next time, it will reports
a invalid opcode issue. Fix it. Only be compiled, not be tested.
Fixes: 492caffa8a1a ("net: ethernet: nixge: Add support for National Instruments XGE netdev")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221107101443.120205-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A recent patch exposed another issue in napi_get_frags()
caught by syzbot [1]
Before feeding packets to GRO, and calling napi_complete()
we must first grab NAPI_STATE_SCHED.
[1]
WARNING: CPU: 0 PID: 3612 at net/core/dev.c:6076 napi_complete_done+0x45b/0x880 net/core/dev.c:6076
Modules linked in:
CPU: 0 PID: 3612 Comm: syz-executor408 Not tainted 6.1.0-rc3-syzkaller-00175-g1118b2049d77 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
RIP: 0010:napi_complete_done+0x45b/0x880 net/core/dev.c:6076
Code: c1 ea 03 0f b6 14 02 4c 89 f0 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 24 04 00 00 41 89 5d 1c e9 73 fc ff ff e8 b5 53 22 fa <0f> 0b e9 82 fe ff ff e8 a9 53 22 fa 48 8b 5c 24 08 31 ff 48 89 de
RSP: 0018:ffffc90003c4f920 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000030 RCX: 0000000000000000
RDX: ffff8880251c0000 RSI: ffffffff875a58db RDI: 0000000000000007
RBP: 0000000000000001 R08: 0000000000000007 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000001 R12: ffff888072d02628
R13: ffff888072d02618 R14: ffff888072d02634 R15: 0000000000000000
FS: 0000555555f13300(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055c44d3892b8 CR3: 00000000172d2000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
napi_complete include/linux/netdevice.h:510 [inline]
tun_get_user+0x206d/0x3a60 drivers/net/tun.c:1980
tun_chr_write_iter+0xdb/0x200 drivers/net/tun.c:2027
call_write_iter include/linux/fs.h:2191 [inline]
do_iter_readv_writev+0x20b/0x3b0 fs/read_write.c:735
do_iter_write+0x182/0x700 fs/read_write.c:861
vfs_writev+0x1aa/0x630 fs/read_write.c:934
do_writev+0x133/0x2f0 fs/read_write.c:977
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f37021a3c19
Fixes: 1118b2049d77 ("net: tun: Fix memory leaks of napi_get_frags")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Wang Yufen <wangyufen@huawei.com>
Link: https://lore.kernel.org/r/20221107180011.188437-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When prestera_sdma_switch_init() failed, the memory pointed to by
sw->rxtx isn't released. Fix it. Only be compiled, not be tested.
Fixes: 501ef3066c89 ("net: marvell: prestera: Add driver for Prestera family ASIC devices")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Vadym Kochan <vadym.kochan@plvision.eu>
Link: https://lore.kernel.org/r/20221108025607.338450-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a blank line to make the sentence before the list render as a separate
paragraph, not a definition.
Link: https://lkml.kernel.org/r/20221107142255.4038811-1-glider@google.com
Fixes: 93858ae70cf4 ("kmsan: add ReST documentation")
Signed-off-by: Alexander Potapenko <glider@google.com>
Suggested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A user could write a name of a file under 'damon/' debugfs directory,
which is not a user-created context, to 'rm_contexts' file. In the case,
'dbgfs_rm_context()' just assumes it's the valid DAMON context directory
only if a file of the name exist. As a result, invalid memory access
could happen as below. Fix the bug by checking if the given input is for
a directory. This check can filter out non-context inputs because
directories under 'damon/' debugfs directory can be created via only
'mk_contexts' file.
This bug has found by syzbot[1].
[1] https://lore.kernel.org/damon/000000000000ede3ac05ec4abf8e@google.com/
Link: https://lkml.kernel.org/r/20221107165001.5717-2-sj@kernel.org
Fixes: 75c1c2b53c78 ("mm/damon/dbgfs: support multiple contexts")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: syzbot+6087eafb76a94c4ac9eb@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org> [5.15.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In RCU mode, the node limits were being updated to the last pivot which
may not be correct and would cause the metadata to be set when it
shouldn't. Fix this by not setting a new limit in this case.
Link: https://lkml.kernel.org/r/20221107163857.867377-1-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
It is possible to confuse the depth tracking in the maple state by
searching the same node for values. Fix the depth tracking by moving
where the depth is incremented closer to where the node changes level.
Also change the initial depth setting when using the root node.
Link: https://lkml.kernel.org/r/20221107163814.866612-1-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The following bug is reported to be triggered when starting X on x86-32
system with i915:
[ 225.777375] kernel BUG at mm/memory.c:2664!
[ 225.777391] invalid opcode: 0000 [#1] PREEMPT SMP
[ 225.777405] CPU: 0 PID: 2402 Comm: Xorg Not tainted 6.1.0-rc3-bdg+ #86
[ 225.777415] Hardware name: /8I865G775-G, BIOS F1 08/29/2006
[ 225.777421] EIP: __apply_to_page_range+0x24d/0x31c
[ 225.777437] Code: ff ff 8b 55 e8 8b 45 cc e8 0a 11 ec ff 89 d8 83 c4 28 5b 5e 5f 5d c3 81 7d e0 a0 ef 96 c1 74 ad 8b 45 d0 e8 2d 83 49 00 eb a3 <0f> 0b 25 00 f0 ff ff 81 eb 00 00 00 40 01 c3 8b 45 ec 8b 00 e8 76
[ 225.777446] EAX: 00000001 EBX: c53a3b58 ECX: b5c00000 EDX: c258aa00
[ 225.777454] ESI: b5c00000 EDI: b5900000 EBP: c4b0fdb4 ESP: c4b0fd80
[ 225.777462] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 EFLAGS: 00010202
[ 225.777470] CR0: 80050033 CR2: b5900000 CR3: 053a3000 CR4: 000006d0
[ 225.777479] Call Trace:
[ 225.777486] ? i915_memcpy_init_early+0x63/0x63 [i915]
[ 225.777684] apply_to_page_range+0x21/0x27
[ 225.777694] ? i915_memcpy_init_early+0x63/0x63 [i915]
[ 225.777870] remap_io_mapping+0x49/0x75 [i915]
[ 225.778046] ? i915_memcpy_init_early+0x63/0x63 [i915]
[ 225.778220] ? mutex_unlock+0xb/0xd
[ 225.778231] ? i915_vma_pin_fence+0x6d/0xf7 [i915]
[ 225.778420] vm_fault_gtt+0x2a9/0x8f1 [i915]
[ 225.778644] ? lock_is_held_type+0x56/0xe7
[ 225.778655] ? lock_is_held_type+0x7a/0xe7
[ 225.778663] ? 0xc1000000
[ 225.778670] __do_fault+0x21/0x6a
[ 225.778679] handle_mm_fault+0x708/0xb21
[ 225.778686] ? mt_find+0x21e/0x5ae
[ 225.778696] exc_page_fault+0x185/0x705
[ 225.778704] ? doublefault_shim+0x127/0x127
[ 225.778715] handle_exception+0x130/0x130
[ 225.778723] EIP: 0xb700468a
Recently pud_huge() got aware of non-present entry by commit 3a194f3f8ad0
("mm/hugetlb: make pud_huge() and follow_huge_pud() aware of non-present
pud entry") to handle some special states of gigantic page. However, it's
overlooked that pud_none() always returns false when running with 2-level
paging, and as a result pud_huge() can return true pointlessly.
Introduce "#if CONFIG_PGTABLE_LEVELS > 2" to pud_huge() to deal with this.
Link: https://lkml.kernel.org/r/20221107021010.2449306-1-naoya.horiguchi@linux.dev
Fixes: 3a194f3f8ad0 ("mm/hugetlb: make pud_huge() and follow_huge_pud() aware of non-present pud entry")
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When psi annotations were added to to btrfs compression reads, the psi
state tracking over add_ra_bio_pages and btrfs_submit_compressed_read was
faulty. A pressure state, once entered, is never left. This results in
incorrectly elevated pressure, which triggers OOM kills.
pflags record the *previous* memstall state when we enter a new one. The
code tried to initialize pflags to 1, and then optimize the leave call
when we either didn't enter a memstall, or were already inside a nested
stall. However, there can be multiple PageWorkingset pages in the bio, at
which point it's that path itself that enters repeatedly and overwrites
pflags. This causes us to miss the exit.
Enter the stall only once if needed, then unwind correctly.
erofs has the same problem, fix that up too. And move the memstall exit
past submit_bio() to restore submit accounting originally added by
b8e24a9300b0 ("block: annotate refault stalls from IO submission").
Link: https://lkml.kernel.org/r/Y2UHRqthNUwuIQGS@cmpxchg.org
Fixes: 4088a47e78f9 ("btrfs: add manual PSI accounting for compressed reads")
Fixes: 99486c511f68 ("erofs: add manual PSI accounting for the compressed address space")
Fixes: 118f3663fbc6 ("block: remove PSI accounting from the bio layer")
Link: https://lore.kernel.org/r/d20a0a85-e415-cf78-27f9-77dd7a94bc8d@leemhuis.info/
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Sterba <dsterba@suse.com>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
If a nilfs2 filesystem is downgraded to read-only due to metadata
corruption on disk and is remounted read/write, or if emergency read-only
remount is performed, detaching a log writer and synchronizing the
filesystem can be done at the same time.
In these cases, use-after-free of the log writer (hereinafter
nilfs->ns_writer) can happen as shown in the scenario below:
Task1 Task2
-------------------------------- ------------------------------
nilfs_construct_segment
nilfs_segctor_sync
init_wait
init_waitqueue_entry
add_wait_queue
schedule
nilfs_remount (R/W remount case)
nilfs_attach_log_writer
nilfs_detach_log_writer
nilfs_segctor_destroy
kfree
finish_wait
_raw_spin_lock_irqsave
__raw_spin_lock_irqsave
do_raw_spin_lock
debug_spin_lock_before <-- use-after-free
While Task1 is sleeping, nilfs->ns_writer is freed by Task2. After Task1
waked up, Task1 accesses nilfs->ns_writer which is already freed. This
scenario diagram is based on the Shigeru Yoshida's post [1].
This patch fixes the issue by not detaching nilfs->ns_writer on remount so
that this UAF race doesn't happen. Along with this change, this patch
also inserts a few necessary read-only checks with superblock instance
where only the ns_writer pointer was used to check if the filesystem is
read-only.
Link: https://syzkaller.appspot.com/bug?id=79a4c002e960419ca173d55e863bd09e8112df8b
Link: https://lkml.kernel.org/r/20221103141759.1836312-1-syoshida@redhat.com [1]
Link: https://lkml.kernel.org/r/20221104142959.28296-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+f816fa82f8783f7a02bb@syzkaller.appspotmail.com
Reported-by: Shigeru Yoshida <syoshida@redhat.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There is a case in exc_invalid_op handler that is executed outside the
irqentry_enter()/irqentry_exit() region when an UD2 instruction is used to
encode a call to __warn().
In that case the `struct pt_regs` passed to the interrupt handler is never
unpoisoned by KMSAN (this is normally done in irqentry_enter()), which
leads to false positives inside handle_bug().
Use kmsan_unpoison_entry_regs() to explicitly unpoison those registers
before using them.
Link: https://lkml.kernel.org/r/20221102110611.1085175-5-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Marco Elver <elver@google.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
As pointed out by Peter Zijlstra, __msan_poison_alloca() does not play
well with IRQ code when PREEMPT_RT is on, because in that mode even
GFP_ATOMIC allocations cannot be performed.
Fixing this would require making stackdepot completely lockless, which is
quite challenging and may be excessive for the time being.
Instead, make sure KMSAN is incompatible with PREEMPT_RT, like other debug
configs are.
Link: https://lkml.kernel.org/r/20221102110611.1085175-4-glider@google.com
Link: https://lore.kernel.org/lkml/20221025221755.3810809-1-glider@google.com/
Signed-off-by: Alexander Potapenko <glider@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
As pointed out by Masahiro Yamada, Kconfig picks up the first default
entry which has true 'if' condition. Hence, the previously added check
for KMSAN was never used, because it followed the checks for 64BIT and
!64BIT.
Put KMSAN check before others to ensure it is always applied.
Link: https://lkml.kernel.org/r/20221102110611.1085175-3-glider@google.com
Link: https://github.com/google/kmsan/issues/89
Link: https://lore.kernel.org/linux-mm/20221024212144.2852069-3-glider@google.com/
Fixes: 921757bc9b61 ("Kconfig.debug: disable CONFIG_FRAME_WARN for KMSAN by default")
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Marco Elver <elver@google.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Make sure usercopy hooks from linux/instrumented.h are invoked for
copy_from_user_nmi(). This fixes KMSAN false positives reported when
dumping opcodes for a stack trace.
Link: https://lkml.kernel.org/r/20221102110611.1085175-2-glider@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Marco Elver <elver@google.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Without that, every call to __msan_poison_alloca() in NMI may end up
allocating memory, which is NMI-unsafe.
Link: https://lkml.kernel.org/r/20221102110611.1085175-1-glider@google.com
Link: https://lore.kernel.org/lkml/20221025221755.3810809-1-glider@google.com/
Signed-off-by: Alexander Potapenko <glider@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The kernel test robot reported build failures with a 'randconfig' on s390:
>> mm/hugetlb_vmemmap.c:421:11: error: a function declaration without a
prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
core_param(hugetlb_free_vmemmap, vmemmap_optimize_enabled, bool, 0);
^
Link: https://lore.kernel.org/linux-mm/202210300751.rG3UDsuc-lkp@intel.com/
Link: https://lkml.kernel.org/r/patch.git-296b83ca939b.your-ad-here.call-01667411912-ext-5073@work.hours
Fixes: 30152245c63b ("mm: hugetlb_vmemmap: replace early_param() with core_param()")
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
mfill_atomic_install_pte() checks page->mapping to detect whether one page
is used in the page cache. However as pointed out by Matthew, the page
can logically be a tail page rather than always the head in the case of
uffd minor mode with UFFDIO_CONTINUE. It means we could wrongly install
one pte with shmem thp tail page assuming it's an anonymous page.
It's not that clear even for anonymous page, since normally anonymous
pages also have page->mapping being setup with the anon vma. It's safe
here only because the only such caller to mfill_atomic_install_pte() is
always passing in a newly allocated page (mcopy_atomic_pte()), whose
page->mapping is not yet setup. However that's not extremely obvious
either.
For either of above, use page_mapping() instead.
Link: https://lkml.kernel.org/r/Y2K+y7wnhC4vbnP2@x1n
Fixes: 153132571f02 ("userfaultfd/shmem: support UFFDIO_CONTINUE for shmem")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Matthew Wilcox <willy@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
virtio_pmem use devm_memremap_pages() to map the device memory. By
default this memory is mapped as encrypted with SEV. Guest reboot changes
the current encryption key and guest no longer properly decrypts the FSDAX
device meta data.
Mark the corresponding device memory region for FSDAX devices (mapped with
memremap_pages) as decrypted to retain the persistent memory property.
Link: https://lkml.kernel.org/r/20221102160728.3184016-1-pankaj.gupta@amd.com
Fixes: b7b3c01b19159 ("mm/memremap_pages: support multiple ranges per invocation")
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Anatoly Pugachev reported sparc64 breakage on the patch:
https://lore.kernel.org/r/20221021160603.GA23307@u164.east.ru
The sparc64 impl of pte_mkdirty() is definitely slightly special in that
it leverages a code patching mechanism for sun4u/sun4v on relevant pgtable
entry operations.
Before having a clue of why the sparc64 is special and caused the patch to
SIGSEGV the processes, revert the patch for now. The swap path of dirty
bit inheritage is kept because that's using the swap shared code so we
assume it'll not be affected.
Link: https://lkml.kernel.org/r/Y1Wbi4yyVvDtg4zN@x1n
Fixes: 0ccf7f168e17 ("mm/thp: carry over dirty bit when thp splits on pmd")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Tested-by: Anatoly Pugachev <matorola@gmail.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andi Kleen <andi.kleen@intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A semaphore deadlock can occur if nilfs_get_block() detects metadata
corruption while locating data blocks and a superblock writeback occurs at
the same time:
task 1 task 2
------ ------
* A file operation *
nilfs_truncate()
nilfs_get_block()
down_read(rwsem A) <--
nilfs_bmap_lookup_contig()
... generic_shutdown_super()
nilfs_put_super()
* Prepare to write superblock *
down_write(rwsem B) <--
nilfs_cleanup_super()
* Detect b-tree corruption * nilfs_set_log_cursor()
nilfs_bmap_convert_error() nilfs_count_free_blocks()
__nilfs_error() down_read(rwsem A) <--
nilfs_set_error()
down_write(rwsem B) <--
*** DEADLOCK ***
Here, nilfs_get_block() readlocks rwsem A (= NILFS_MDT(dat_inode)->mi_sem)
and then calls nilfs_bmap_lookup_contig(), but if it fails due to metadata
corruption, __nilfs_error() is called from nilfs_bmap_convert_error()
inside the lock section.
Since __nilfs_error() calls nilfs_set_error() unless the filesystem is
read-only and nilfs_set_error() attempts to writelock rwsem B (=
nilfs->ns_sem) to write back superblock exclusively, hierarchical lock
acquisition occurs in the order rwsem A -> rwsem B.
Now, if another task starts updating the superblock, it may writelock
rwsem B during the lock sequence above, and can deadlock trying to
readlock rwsem A in nilfs_count_free_blocks().
However, there is actually no need to take rwsem A in
nilfs_count_free_blocks() because it, within the lock section, only reads
a single integer data on a shared struct with
nilfs_sufile_get_ncleansegs(). This has been the case after commit
aa474a220180 ("nilfs2: add local variable to cache the number of clean
segments"), that is, even before this bug was introduced.
So, this resolves the deadlock problem by just not taking the semaphore in
nilfs_count_free_blocks().
Link: https://lkml.kernel.org/r/20221029044912.9139-1-konishi.ryusuke@gmail.com
Fixes: e828949e5b42 ("nilfs2: call nilfs_error inside bmap routines")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+45d6ce7b7ad7ef455d03@syzkaller.appspotmail.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org> [2.6.38+
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
