Age | Commit message (Collapse) | Author |
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fix from Borislav Petkov:
- Fix a race condition when clearing error count bits and toggling the
error interrupt throug the same register, in synopsys_edac
* tag 'edac_urgent_for_v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/synopsys: Fix ECC status and IRQ control race condition
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Add a new PCI ID which belongs to a new AMD CPU family 0x1a
- Ensure that that last level cache ID is set in all cases, in the AMD
CPU topology parsing code, in order to prevent invalid scheduling
domain CPU masks
* tag 'x86_urgent_for_v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/topology/amd: Ensure that LLC ID is initialized
x86/amd_nb: Add new PCI IDs for AMD family 0x1a
|
|
Pull drm fixes from Dave Airlie:
"This should be the last set of fixes for 6.9, i915, xe and amdgpu are
the bulk here, one of the previous nouveau fixes turned up an issue,
so reverting it, otherwise one core and a couple of meson fixes.
core:
- fix connector debugging output
i915:
- Automate CCS Mode setting during engine resets
- Fix audio time stamp programming for DP
- Fix parsing backlight BDB data
xe:
- Fix use zero-length element array
- Move more from system wq to ordered private wq
- Do not ignore return for drmm_mutex_init
amdgpu:
- DCN 3.5 fix
- MST DSC fixes
- S0i3 fix
- S4 fix
- HDP MMIO mapping fix
- Fix a regression in visible vram handling
amdkfd:
- Spatial partition fix
meson:
- dw-hdmi: power-up fixes
- dw-hdmi: add badngap setting for g12
nouveau:
- revert SG_DEBUG fix that has a side effect"
* tag 'drm-fixes-2024-05-11' of https://gitlab.freedesktop.org/drm/kernel:
Revert "drm/nouveau/firmware: Fix SG_DEBUG error with nvkm_firmware_ctor()"
drm/amdgpu: Fix comparison in amdgpu_res_cpu_visible
drm/amdkfd: don't allow mapping the MMIO HDP page with large pages
drm/xe: Use ordered WQ for G2H handler
drm/xe/guc: Check error code when initializing the CT mutex
drm/xe/ads: Use flexible-array
Revert "drm/amdkfd: Add partition id field to location_id"
dm/amd/pm: Fix problems with reboot/shutdown for some SMU 13.0.4/13.0.11 users
drm/amd/display: MST DSC check for older devices
drm/amd/display: Fix idle optimization checks for multi-display and dual eDP
drm/amd/display: Fix DSC-re-computing
drm/amd/display: Enable urgent latency adjustments for DCN35
drm/connector: Add \n to message about demoting connector force-probes
drm/i915/bios: Fix parsing backlight BDB data
drm/i915/audio: Fix audio time stamp programming for DP
drm/i915/gt: Automate CCS Mode setting during engine resets
drm/meson: dw-hdmi: add bandgap setting for g12
drm/meson: dw-hdmi: power up phy on device init
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM fixes from Andrew Morton:
"18 hotfixes, 7 of which are cc:stable.
More fixups for this cycle's page_owner updates. And a few userfaultfd
fixes. Otherwise, random singletons - see the individual changelogs
for details"
* tag 'mm-hotfixes-stable-2024-05-10-13-14' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: add entry for Barry Song
selftests/mm: fix powerpc ARCH check
mailmap: add entry for John Garry
XArray: set the marks correctly when splitting an entry
selftests/vDSO: fix runtime errors on LoongArch
selftests/vDSO: fix building errors on LoongArch
mm,page_owner: don't remove __GFP_NOLOCKDEP in add_stack_record_to_list
fs/proc/task_mmu: fix uffd-wp confusion in pagemap_scan_pmd_entry()
fs/proc/task_mmu: fix loss of young/dirty bits during pagemap scan
mm/vmalloc: fix return value of vb_alloc if size is 0
mm: use memalloc_nofs_save() in page_cache_ra_order()
kmsan: compiler_types: declare __no_sanitize_or_inline
lib/test_xarray.c: fix error assumptions on check_xa_multi_store_adv_add()
tools: fix userspace compilation with new test_xarray changes
MAINTAINERS: update URL's for KEYS/KEYRINGS_INTEGRITY and TPM DEVICE DRIVER
mm: page_owner: fix wrong information in dump_page_owner
maple_tree: fix mas_empty_area_rev() null pointer dereference
mm/userfaultfd: reset ptes when close() for wr-protected ones
|
|
This reverts commit 52a6947bf576b97ff8e14bb0a31c5eaf2d0d96e2.
This causes loading failures in
[ 0.367379] nouveau 0000:01:00.0: NVIDIA GP104 (134000a1)
[ 0.474499] nouveau 0000:01:00.0: bios: version 86.04.50.80.13
[ 0.474620] nouveau 0000:01:00.0: pmu: firmware unavailable
[ 0.474977] nouveau 0000:01:00.0: fb: 8192 MiB GDDR5
[ 0.484371] nouveau 0000:01:00.0: sec2(acr): mbox 00000001 00000000
[ 0.484377] nouveau 0000:01:00.0: sec2(acr):load: boot failed: -5
[ 0.484379] nouveau 0000:01:00.0: acr: init failed, -5
[ 0.484466] nouveau 0000:01:00.0: init failed with -5
[ 0.484468] nouveau: DRM-master:00000000:00000080: init failed with -5
[ 0.484470] nouveau 0000:01:00.0: DRM-master: Device allocation failed: -5
[ 0.485078] nouveau 0000:01:00.0: probe with driver nouveau failed with error -50
I tried tracking it down but ran out of time this week, will revisit next week.
Reported-by: Dan Moulding <dan@danm.net>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
core:
- fix connector debugging output
meson:
- dw-hdmi: power-up fixes
- dw-hdmi: add badngap setting for g12
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240510072027.GA9131@linux.fritz.box
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"Some last-minute fixes for this release from the GPIO subsystem.
The first two address a regression in performance reported to me after
the conversion to using SRCU in GPIOLIB that was merged during the
v6.9 merge window. The second patch is not technically a fix but since
after the first one we no longer need to use a per-descriptor SRCU
struct, I think it's worth to simplify the code before it gets
released on Sunday.
The next two commits fix two memory issues: one use-after-free bug and
one instance of possibly leaking kernel stack memory to user-space.
Summary:
- fix a performance regression in GPIO requesting and releasing after
the conversion to SRCU
- fix a use-after-free bug due to a race-condition
- fix leaking stack memory to user-space in a GPIO uABI corner case"
* tag 'gpio-fixes-for-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: cdev: fix uninitialised kfifo
gpiolib: cdev: Fix use after free in lineinfo_changed_notify
gpiolib: use a single SRCU struct for all GPIO descriptors
gpiolib: fix the speed of descriptor label setting with SRCU
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.9-2024-05-10:
amdgpu:
- DCN 3.5 fix
- MST DSC fixes
- S0i3 fix
- S4 fix
- HDP MMIO mapping fix
- Fix a regression in visible vram handling
amdkfd:
- Spatial partition fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240510171110.1394940-1-alexander.deucher@amd.com
|
|
Include a .mailmap entry to synchronize with both my past and current
emails. Among them, three business mailboxes are dead.
Link: https://lkml.kernel.org/r/20240506042009.10854-1-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
In commit 0518dbe97fe6 ("selftests/mm: fix cross compilation with LLVM")
the logic to detect the machine architecture in the Makefile was changed
to use ARCH, and only fallback to uname -m if ARCH is unset. However the
tests of ARCH were not updated to account for the fact that ARCH is
"powerpc" for powerpc builds, not "ppc64".
Fix it by changing the checks to look for "powerpc", and change the
uname -m logic to convert "ppc64.*" into "powerpc".
With that fixed the following tests now build for powerpc again:
* protection_keys
* va_high_addr_switch
* virtual_address_range
* write_to_hugetlbfs
Link: https://lkml.kernel.org/r/20240506115825.66415-1-mpe@ellerman.id.au
Fixes: 0518dbe97fe6 ("selftests/mm: fix cross compilation with LLVM")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org> [6.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- nvme target fixes (Sagi, Dan, Maurizo)
- new vendor quirk for broken MSI (Sean)
- Virtual boundary fix for a regression in this merge window (Ming)
* tag 'block-6.9-20240510' of git://git.kernel.dk/linux:
nvmet-rdma: fix possible bad dereference when freeing rsps
nvmet: prevent sprintf() overflow in nvmet_subsys_nsid_exists()
nvmet: make nvmet_wq unbound
nvmet-auth: return the error code to the nvmet_auth_ctrl_hash() callers
nvme-pci: Add quirk for broken MSIs
block: set default max segment size in case of virt_boundary
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"Two device specific fixes here, one avoiding glitches on chip select
with the STM32 driver and one for incorrectly configured clocks on the
Microchip QSPI controller"
* tag 'spi-fix-v6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: microchip-core-qspi: fix setting spi bus clock rate
spi: stm32: enable controller before asserting CS
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"Two fixes here, one from Johan which fixes error handling when we
attempt to create duplicate debugfs files and one for an incorrect
specification of ramp_delay with the rtq2208"
* tag 'regulator-fix-v6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: fix debugfs creation regression
regulator: rtq2208: Fix the BUCK ramp_delay range to maximum of 16mVstep/us
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
"Fix possible (but unlikely) out-of-bounds access in the timer
migration per-CPU-init code"
* tag 'timers-urgent-2024-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers/migration: Prevent out of bounds access on failure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- Fix offset miscalculation on ARM-SMMU driver
- AMD IOMMU fix for initializing state of untrusted devices
* tag 'iommu-fixes-v6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/arm-smmu: Use the correct type in nvidia_smmu_context_fault()
iommu/amd: Enhance def_domain_type to handle untrusted device
|
|
It incorrectly claimed a resource isn't CPU visible if it's located at
the very end of CPU visible VRAM.
Fixes: a6ff969fe9cb ("drm/amdgpu: fix visible VRAM handling during faults")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3343
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reported-and-Tested-by: Jeremy Day <jsday@noreason.ca>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CC: stable@vger.kernel.org
|
|
We don't get the right offset in that case. The GPU has
an unused 4K area of the register BAR space into which you can
remap registers. We remap the HDP flush registers into this
space to allow userspace (CPU or GPU) to flush the HDP when it
updates VRAM. However, on systems with >4K pages, we end up
exposing PAGE_SIZE of MMIO space.
Fixes: d8e408a82704 ("drm/amdkfd: Expose HDP registers to user space")
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
The original topology evaluation code initialized cpu_data::topo::llc_id
with the die ID initialy and then eventually overwrite it with information
gathered from a CPUID leaf.
The conversion analysis failed to spot that particular detail and omitted
this initial assignment under the assumption that each topology evaluation
path will set it up. That assumption is mostly correct, but turns out to be
wrong in case that the CPUID leaf 0x80000006 does not provide a LLC ID.
In that case, LLC ID is invalid and as a consequence the setup of the
scheduling domain CPU masks is incorrect which subsequently causes the
scheduler core to complain about it during CPU hotplug:
BUG: arch topology borken
the CLS domain not a subset of the MC domain
Cure it by reusing legacy_set_llc() and assigning the die ID if the LLC ID
is invalid after all possible parsers have been tried.
Fixes: f7fb3b2dd92c ("x86/cpu: Provide an AMD/HYGON specific topology parser")
Reported-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Link: https://lore.kernel.org/r/PUZPR04MB63168AC442C12627E827368581292@PUZPR04MB6316.apcprd04.prod.outlook.com
|
|
If a line is requested with debounce, and that results in debouncing
in software, and the line is subsequently reconfigured to enable edge
detection then the allocation of the kfifo to contain edge events is
overlooked. This results in events being written to and read from an
uninitialised kfifo. Read events are returned to userspace.
Initialise the kfifo in the case where the software debounce is
already active.
Fixes: 65cff7046406 ("gpiolib: cdev: support setting debounce")
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240510065342.36191-1-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
Add the new PCI Device IDs to the MISC IDs list to support new
generation of AMD 1Ah family 70h Models of processors.
[ bp: Massage commit message. ]
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240510111829.969501-1-Shyam-sundar.S-k@amd.com
|
|
This was missed because of the function pointer indirection.
nvidia_smmu_context_fault() is also installed as a irq function, and the
'void *' was changed to a struct arm_smmu_domain. Since the iommu_domain
is embedded at a non-zero offset this causes nvidia_smmu_context_fault()
to miscompute the offset. Fixup the types.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000120
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000000107c9f000
[0000000000000120] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
Modules linked in:
CPU: 1 PID: 47 Comm: kworker/u25:0 Not tainted 6.9.0-0.rc7.58.eln136.aarch64 #1
Hardware name: Unknown NVIDIA Jetson Orin NX/NVIDIA Jetson Orin NX, BIOS 3.1-32827747 03/19/2023
Workqueue: events_unbound deferred_probe_work_func
pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : nvidia_smmu_context_fault+0x1c/0x158
lr : __free_irq+0x1d4/0x2e8
sp : ffff80008044b6f0
x29: ffff80008044b6f0 x28: ffff000080a60b18 x27: ffffd32b5172e970
x26: 0000000000000000 x25: ffff0000802f5aac x24: ffff0000802f5a30
x23: ffff0000802f5b60 x22: 0000000000000057 x21: 0000000000000000
x20: ffff0000802f5a00 x19: ffff000087d4cd80 x18: ffffffffffffffff
x17: 6234362066666666 x16: 6630303078302d30 x15: ffff00008156d888
x14: 0000000000000000 x13: ffff0000801db910 x12: ffff00008156d6d0
x11: 0000000000000003 x10: ffff0000801db918 x9 : ffffd32b50f94d9c
x8 : 1fffe0001032fda1 x7 : ffff00008197ed00 x6 : 000000000000000f
x5 : 000000000000010e x4 : 000000000000010e x3 : 0000000000000000
x2 : ffffd32b51720cd8 x1 : ffff000087e6f700 x0 : 0000000000000057
Call trace:
nvidia_smmu_context_fault+0x1c/0x158
__free_irq+0x1d4/0x2e8
free_irq+0x3c/0x80
devm_free_irq+0x64/0xa8
arm_smmu_domain_free+0xc4/0x158
iommu_domain_free+0x44/0xa0
iommu_deinit_device+0xd0/0xf8
__iommu_group_remove_device+0xcc/0xe0
iommu_bus_notifier+0x64/0xa8
notifier_call_chain+0x78/0x148
blocking_notifier_call_chain+0x4c/0x90
bus_notify+0x44/0x70
device_del+0x264/0x3e8
pci_remove_bus_device+0x84/0x120
pci_remove_root_bus+0x5c/0xc0
dw_pcie_host_deinit+0x38/0xe0
tegra_pcie_config_rp+0xc0/0x1f0
tegra_pcie_dw_probe+0x34c/0x700
platform_probe+0x70/0xe8
really_probe+0xc8/0x3a0
__driver_probe_device+0x84/0x160
driver_probe_device+0x44/0x130
__device_attach_driver+0xc4/0x170
bus_for_each_drv+0x90/0x100
__device_attach+0xa8/0x1c8
device_initial_probe+0x1c/0x30
bus_probe_device+0xb0/0xc0
deferred_probe_work_func+0xbc/0x120
process_one_work+0x194/0x490
worker_thread+0x284/0x3b0
kthread+0xf4/0x108
ret_from_fork+0x10/0x20
Code: a9b97bfd 910003fd a9025bf5 f85a0035 (b94122a1)
Cc: stable@vger.kernel.org
Fixes: e0976331ad11 ("iommu/arm-smmu: Pass arm_smmu_domain to internal functions")
Reported-by: Jerry Snitselaar <jsnitsel@redhat.com>
Closes: https://lore.kernel.org/all/jto5e3ili4auk6sbzpnojdvhppgwuegir7mpd755anfhwcbkfz@2u5gh7bxb4iv
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Jerry Snitselaar <jsnitsel@redhat.com>
Acked-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/0-v1-24ce064de41f+4ac-nvidia_smmu_fault_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
- Fix use zero-length element array
- Move more from system wq to ordered private wq
- Do not ignore return for drmm_mutex_init
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c3rduifdp5wipkljdpuq4x6uowkc2uyzgdoft4txvp6mgvzjaj@7zw7c6uw4wrf
|
|
https://anongit.freedesktop.org/git/drm/drm-intel into drm-fixes
- Automate CCS Mode setting during engine resets (Andi)
- Fix audio time stamp programming for DP (Chaitanya)
- Fix parsing backlight BDB data (Karthikeyan)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZjvTVEmQeVKVB2jx@intel.com
|
|
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.9
- nvme target fixes (Sagi, Dan, Maurizo)
- new vendor quirk for broken MSI (Sean)"
* tag 'nvme-6.9-2024-05-09' of git://git.infradead.org/nvme:
nvmet-rdma: fix possible bad dereference when freeing rsps
nvmet: prevent sprintf() overflow in nvmet_subsys_nsid_exists()
nvmet: make nvmet_wq unbound
nvmet-auth: return the error code to the nvmet_auth_ctrl_hash() callers
nvme-pci: Add quirk for broken MSIs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- pmbus/ucd9000: Increase chip access delay to avoid random access
errors
- corsair-cpro: Protect kernel code against parallel hidraw access from
userspace
* tag 'hwmon-for-v6.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (pmbus/ucd9000) Increase delay from 250 to 500us
hwmon: (corsair-cpro) Protect ccp->wait_input_report with a spinlock
hwmon: (corsair-cpro) Use complete_all() instead of complete() in ccp_raw_event()
hwmon: (corsair-cpro) Use a separate buffer for sending commands
|
|
Following the failure observed with a delay of 250us, experiments were
conducted with various delays. It was found that a delay of 350us
effectively mitigated the issue.
To provide a more optimal solution while still allowing a margin for
stability, the delay is being adjusted to 500us.
Signed-off-by: Lakshmi Yadlapati <lakshmiy@us.ibm.com>
Link: https://lore.kernel.org/r/20240507194603.1305750-1-lakshmiy@us.ibm.com
Fixes: 8d655e6523764 ("hwmon: (ucd90320) Add minimum delay between bus accesses")
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and IPsec.
The bridge patch is actually a follow-up to a recent fix in the same
area. We have a pending v6.8 AF_UNIX regression; it should be solved
soon, but not in time for this PR.
Current release - regressions:
- eth: ks8851: Queue RX packets in IRQ handler instead of disabling
BHs
- net: bridge: fix corrupted ethernet header on multicast-to-unicast
Current release - new code bugs:
- xfrm: fix possible bad pointer derferencing in error path
Previous releases - regressionis:
- core: fix out-of-bounds access in ops_init
- ipv6:
- fix potential uninit-value access in __ip6_make_skb()
- fib6_rules: avoid possible NULL dereference in fib6_rule_action()
- tcp: use refcount_inc_not_zero() in tcp_twsk_unique().
- rtnetlink: correct nested IFLA_VF_VLAN_LIST attribute validation
- rxrpc: fix congestion control algorithm
- bluetooth:
- l2cap: fix slab-use-after-free in l2cap_connect()
- msft: fix slab-use-after-free in msft_do_close()
- eth: hns3: fix kernel crash when devlink reload during
initialization
- eth: dsa: mv88e6xxx: add phylink_get_caps for the mv88e6320/21
family
Previous releases - always broken:
- xfrm: preserve vlan tags for transport mode software GRO
- tcp: defer shutdown(SEND_SHUTDOWN) for TCP_SYN_RECV sockets
- eth: hns3: keep using user config after hardware reset"
* tag 'net-6.9-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net: dsa: mv88e6xxx: read cmode on mv88e6320/21 serdes only ports
net: dsa: mv88e6xxx: add phylink_get_caps for the mv88e6320/21 family
net: hns3: fix kernel crash when devlink reload during initialization
net: hns3: fix port vlan filter not disabled issue
net: hns3: use appropriate barrier function after setting a bit value
net: hns3: release PTP resources if pf initialization failed
net: hns3: change type of numa_node_mask as nodemask_t
net: hns3: direct return when receive a unknown mailbox message
net: hns3: using user configure after hardware reset
net/smc: fix neighbour and rtable leak in smc_ib_find_route()
ipv6: prevent NULL dereference in ip6_output()
hsr: Simplify code for announcing HSR nodes timer setup
ipv6: fib6_rules: avoid possible NULL dereference in fib6_rule_action()
dt-bindings: net: mediatek: remove wrongly added clocks and SerDes
rxrpc: Only transmit one ACK per jumbo packet received
rxrpc: Fix congestion control algorithm
selftests: test_bridge_neigh_suppress.sh: Fix failures due to duplicate MAC
ipv6: Fix potential uninit-value access in __ip6_make_skb()
net: phy: marvell-88q2xxx: add support for Rev B1 and B2
appletalk: Improve handling of broadcast packets
...
|
|
Pull ARM fix from Russell King:
- clear stale KASan stack poison when a CPU resumes
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9381/1: kasan: clear stale stack poison
|
|
regulator_get() may sometimes be called more than once for the same
consumer device, something which before commit dbe954d8f163 ("regulator:
core: Avoid debugfs: Directory ... already present! error") resulted in
errors being logged.
A couple of recent commits broke the handling of such cases so that
attributes are now erroneously created in the debugfs root directory the
second time a regulator is requested and the log is filled with errors
like:
debugfs: File 'uA_load' in directory '/' already present!
debugfs: File 'min_uV' in directory '/' already present!
debugfs: File 'max_uV' in directory '/' already present!
debugfs: File 'constraint_flags' in directory '/' already present!
on any further calls.
Fixes: 2715bb11cfff ("regulator: core: Fix more error checking for debugfs_create_dir()")
Fixes: 08880713ceec ("regulator: core: Streamline debugfs operations")
Cc: stable@vger.kernel.org
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240509133304.8883-1-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pull dentry leak fix from Al Viro:
"Dentry leak fix in the qibfs driver that I forgot to send a pull
request for ;-/
My apologies - it actually sat in vfs.git#fixes for more than two
months..."
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
qibfs: fix dentry leak
|
|
System work queues are shared, use a dedicated work queue for G2H
processing to avoid G2H processing getting block behind system tasks.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: <stable@vger.kernel.org>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240506034758.3697397-1-matthew.brost@intel.com
(cherry picked from commit 50aec9665e0babd62b9eee4e613d9a1ef8d2b7de)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The initialization via drmm_mutex_init can fail, so we need to check the
return code and escalate the failure.
The mutex initialization has been moved after all the other init steps
that can't fail, so we're always guaranteed to have those done and don't
have to check in the cleanup code.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240321195512.274210-1-daniele.ceraolospurio@intel.com
(cherry picked from commit b4abeb5545bb3ddcdda3c19067680ad0b2259be4)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Zero-length arrays are deprecated and flexible arrays should be
used instead: https://www.kernel.org/doc/html/v6.9-rc7/process/deprecated.html#zero-length-and-one-element-arrays
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@inria.fr>
Closes: https://lore.kernel.org/r/202405051824.AmjAI5Pg-lkp@intel.com/
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240506141917.205714-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit ee7284230644e21fef0e38fc5bf8f907b6bb7f7c)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The use-after-free issue occurs as follows: when the GPIO chip device file
is being closed by invoking gpio_chrdev_release(), watched_lines is freed
by bitmap_free(), but the unregistration of lineinfo_changed_nb notifier
chain failed due to waiting write rwsem. Additionally, one of the GPIO
chip's lines is also in the release process and holds the notifier chain's
read rwsem. Consequently, a race condition leads to the use-after-free of
watched_lines.
Here is the typical stack when issue happened:
[free]
gpio_chrdev_release()
--> bitmap_free(cdev->watched_lines) <-- freed
--> blocking_notifier_chain_unregister()
--> down_write(&nh->rwsem) <-- waiting rwsem
--> __down_write_common()
--> rwsem_down_write_slowpath()
--> schedule_preempt_disabled()
--> schedule()
[use]
st54spi_gpio_dev_release()
--> gpio_free()
--> gpiod_free()
--> gpiod_free_commit()
--> gpiod_line_state_notify()
--> blocking_notifier_call_chain()
--> down_read(&nh->rwsem); <-- held rwsem
--> notifier_call_chain()
--> lineinfo_changed_notify()
--> test_bit(xxxx, cdev->watched_lines) <-- use after free
The side effect of the use-after-free issue is that a GPIO line event is
being generated for userspace where it shouldn't. However, since the chrdev
is being closed, userspace won't have the chance to read that event anyway.
To fix the issue, call the bitmap_free() function after the unregistration
of lineinfo_changed_nb notifier chain.
Fixes: 51c1064e82e7 ("gpiolib: add new ioctl() for monitoring changes in line info")
Signed-off-by: Zhongqiu Han <quic_zhonhan@quicinc.com>
Link: https://lore.kernel.org/r/20240505141156.2944912-1-quic_zhonhan@quicinc.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
We used a per-descriptor SRCU struct in order to not impose a wait with
synchronize_srcu() for descriptor X on read-only operations of
descriptor Y. Now that we no longer call synchronize_srcu() on
descriptor label change but only when releasing descriptor resources, we
can use a single SRCU structure for all GPIO descriptors in a given chip.
Suggested-by: "Paul E. McKenney" <paulmck@kernel.org>
Acked-by: "Paul E. McKenney" <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20240507172414.28513-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
On the mv88e6320 and 6321 switch family, port 0/1 are serdes only ports.
Modified the mv88e6352_get_port4_serdes_cmode function to pass a port
number since the register set of the 6352 is equal on the 6320/21.
Signed-off-by: Steffen Bätz <steffen@innosonix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20240508072944.54880-3-steffen@innosonix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As of commit de5c9bf40c45 ("net: phylink: require supported_interfaces to
be filled")
Marvell 88e6320/21 switches fail to be probed:
...
mv88e6085 30be0000.ethernet-1:00: phylink: error: empty supported_interfaces
error creating PHYLINK: -22
...
The problem stems from the use of mv88e6185_phylink_get_caps() to get
the device capabilities.
Since there are serdes only ports 0/1 included, create a new dedicated
phylink_get_caps for the 6320 and 6321 to properly support their
set of capabilities.
Fixes: de5c9bf40c45 ("net: phylink: require supported_interfaces to be filled")
Signed-off-by: Steffen Bätz <steffen@innosonix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20240508072944.54880-2-steffen@innosonix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Jijie Shao says:
====================
There are some bugfix for the HNS3 ethernet driver
====================
Link: https://lore.kernel.org/r/20240507134224.2646246-1-shaojijie@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The devlink reload process will access the hardware resources,
but the register operation is done before the hardware is initialized.
So, processing the devlink reload during initialization may lead to kernel
crash.
This patch fixes this by registering the devlink after
hardware initialization.
Fixes: cd6242991d2e ("net: hns3: add support for registering devlink for VF")
Fixes: 93305b77ffcb ("net: hns3: fix kernel crash when devlink reload during pf initialization")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
According to hardware limitation, for device support modify
VLAN filter state but not support bypass port VLAN filter,
it should always disable the port VLAN filter. but the driver
enables port VLAN filter when initializing, if there is no
VLAN(except VLAN 0) id added, the driver will disable it
in service task. In most time, it works fine. But there is
a time window before the service task shceduled and net device
being registered. So if user adds VLAN at this time, the driver
will not update the VLAN filter state, and the port VLAN filter
remains enabled.
To fix the problem, if support modify VLAN filter state but not
support bypass port VLAN filter, set the port vlan filter to "off".
Fixes: 184cd221a863 ("net: hns3: disable port VLAN filter when support function level VLAN filter control")
Fixes: 2ba306627f59 ("net: hns3: add support for modify VLAN filter state")
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There is a memory barrier in followed case. When set the port down,
hclgevf_set_timmer will set DOWN in state. Meanwhile, the service task has
different behaviour based on whether the state is DOWN. Thus, to make sure
service task see DOWN, use smp_mb__after_atomic after calling set_bit().
CPU0 CPU1
========================== ===================================
hclgevf_set_timer_task() hclgevf_periodic_service_task()
set_bit(DOWN,state) test_bit(DOWN,state)
pf also has this issue.
Fixes: ff200099d271 ("net: hns3: remove unnecessary work in hclgevf_main")
Fixes: 1c6dfe6fc6f7 ("net: hns3: remove mailbox and reset work in hclge_main")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
During the PF initialization process, hclge_update_port_info may return an
error code for some reason. At this point, the ptp initialization has been
completed. To void memory leaks, the resources that are applied by ptp
should be released. Therefore, when hclge_update_port_info returns an error
code, hclge_ptp_uninit is called to release the corresponding resources.
Fixes: eaf83ae59e18 ("net: hns3: add querying fec ability from firmware")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
It provides nodemask_t to describe the numa node mask in kernel. To
improve transportability, change the type of numa_node_mask as nodemask_t.
Fixes: 38caee9d3ee8 ("net: hns3: Add support of the HNAE3 framework")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, the driver didn't return when receive a unknown
mailbox message, and continue checking whether need to
generate a response. It's unnecessary and may be incorrect.
Fixes: bb5790b71bad ("net: hns3: refactor mailbox response scheme between PF and VF")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When a reset occurring, it's supposed to recover user's configuration.
Currently, the port info(speed, duplex and autoneg) is stored in hclge_mac
and will be scheduled updated. Consider the case that reset was happened
consecutively. During the first reset, the port info is configured with
a temporary value cause the PHY is reset and looking for best link config.
Second reset start and use pervious configuration which is not the user's.
The specific process is as follows:
+------+ +----+ +----+
| USER | | PF | | HW |
+---+--+ +-+--+ +-+--+
| ethtool --reset | |
+------------------->| reset command |
| ethtool --reset +-------------------->|
+------------------->| +---+
| +---+ | |
| | |reset currently | | HW RESET
| | |and wait to do | |
| |<--+ | |
| | send pervious cfg |<--+
| | (1000M FULL AN_ON) |
| +-------------------->|
| | read cfg(time task) |
| | (10M HALF AN_OFF) +---+
| |<--------------------+ | cfg take effect
| | reset command |<--+
| +-------------------->|
| | +---+
| | send pervious cfg | | HW RESET
| | (10M HALF AN_OFF) |<--+
| +-------------------->|
| | read cfg(time task) |
| | (10M HALF AN_OFF) +---+
| |<--------------------+ | cfg take effect
| | | |
| | read cfg(time task) |<--+
| | (10M HALF AN_OFF) |
| |<--------------------+
| | |
v v v
To avoid aboved situation, this patch introduced req_speed, req_duplex,
req_autoneg to store user's configuration and it only be used after
hardware reset and to recover user's configuration
Fixes: f5f2b3e4dcc0 ("net: hns3: add support for imp-controlled PHYs")
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In smc_ib_find_route(), the neighbour found by neigh_lookup() and rtable
resolved by ip_route_output_flow() are not released or put before return.
It may cause the refcount leak, so fix it.
Link: https://lore.kernel.org/r/20240506015439.108739-1-guwen@linux.alibaba.com
Fixes: e5c4744cfb59 ("net/smc: add SMC-Rv2 connection establishment")
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240507125331.2808-1-guwen@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Before ORing the new clock rate with the control register value read
from the hardware, the existing clock rate needs to be masked off as
otherwise the existing value will interfere with the new one.
CC: stable@vger.kernel.org
Fixes: 8596124c4c1b ("spi: microchip-core-qspi: Add support for microchip fpga qspi controllers")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240508-fox-unpiloted-b97e1535627b@spud
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
According to syzbot, there is a chance that ip6_dst_idev()
returns NULL in ip6_output(). Most places in IPv6 stack
deal with a NULL idev just fine, but not here.
syzbot reported:
general protection fault, probably for non-canonical address 0xdffffc00000000bc: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x00000000000005e0-0x00000000000005e7]
CPU: 0 PID: 9775 Comm: syz-executor.4 Not tainted 6.9.0-rc5-syzkaller-00157-g6a30653b604a #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
RIP: 0010:ip6_output+0x231/0x3f0 net/ipv6/ip6_output.c:237
Code: 3c 1e 00 49 89 df 74 08 4c 89 ef e8 19 58 db f7 48 8b 44 24 20 49 89 45 00 49 89 c5 48 8d 9d e0 05 00 00 48 89 d8 48 c1 e8 03 <42> 0f b6 04 38 84 c0 4c 8b 74 24 28 0f 85 61 01 00 00 8b 1b 31 ff
RSP: 0018:ffffc9000927f0d8 EFLAGS: 00010202
RAX: 00000000000000bc RBX: 00000000000005e0 RCX: 0000000000040000
RDX: ffffc900131f9000 RSI: 0000000000004f47 RDI: 0000000000004f48
RBP: 0000000000000000 R08: ffffffff8a1f0b9a R09: 1ffffffff1f51fad
R10: dffffc0000000000 R11: fffffbfff1f51fae R12: ffff8880293ec8c0
R13: ffff88805d7fc000 R14: 1ffff1100527d91a R15: dffffc0000000000
FS: 00007f135c6856c0(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000080 CR3: 0000000064096000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
NF_HOOK include/linux/netfilter.h:314 [inline]
ip6_xmit+0xefe/0x17f0 net/ipv6/ip6_output.c:358
sctp_v6_xmit+0x9f2/0x13f0 net/sctp/ipv6.c:248
sctp_packet_transmit+0x26ad/0x2ca0 net/sctp/output.c:653
sctp_packet_singleton+0x22c/0x320 net/sctp/outqueue.c:783
sctp_outq_flush_ctrl net/sctp/outqueue.c:914 [inline]
sctp_outq_flush+0x6d5/0x3e20 net/sctp/outqueue.c:1212
sctp_side_effects net/sctp/sm_sideeffect.c:1198 [inline]
sctp_do_sm+0x59cc/0x60c0 net/sctp/sm_sideeffect.c:1169
sctp_primitive_ASSOCIATE+0x95/0xc0 net/sctp/primitive.c:73
__sctp_connect+0x9cd/0xe30 net/sctp/socket.c:1234
sctp_connect net/sctp/socket.c:4819 [inline]
sctp_inet_connect+0x149/0x1f0 net/sctp/socket.c:4834
__sys_connect_file net/socket.c:2048 [inline]
__sys_connect+0x2df/0x310 net/socket.c:2065
__do_sys_connect net/socket.c:2075 [inline]
__se_sys_connect net/socket.c:2072 [inline]
__x64_sys_connect+0x7a/0x90 net/socket.c:2072
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: 778d80be5269 ("ipv6: Add disable_ipv6 sysctl to disable IPv6 operaion on specific interface.")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://lore.kernel.org/r/20240507161842.773961-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Up till now the code to start HSR announce timer, which triggers sending
supervisory frames, was assuming that hsr_netdev_notify() would be called
at least twice for hsrX interface. This was required to have different
values for old and current values of network device's operstate.
This is problematic for a case where hsrX interface is already in the
operational state when hsr_netdev_notify() is called, so timer is not
configured to trigger and as a result the hsrX is not sending supervisory
frames to HSR ring.
This error has been discovered when hsr_ping.sh script was run. To be
more specific - for the hsr1 and hsr2 the hsr_netdev_notify() was
called at least twice with different IF_OPER_{LOWERDOWN|DOWN|UP} states
assigned in hsr_check_carrier_and_operstate(hsr). As a result there was
no issue with sending supervisory frames.
However, with hsr3, the notify function was called only once with
operstate set to IF_OPER_UP and timer responsible for triggering
supervisory frames was not fired.
The solution is to use netif_oper_up() and netif_running() helper
functions to assess if network hsrX device is up.
Only then, when the timer is not already pending, it is started.
Otherwise it is deactivated.
Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240507111214.3519800-1-lukma@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot is able to trigger the following crash [1],
caused by unsafe ip6_dst_idev() use.
Indeed ip6_dst_idev() can return NULL, and must always be checked.
[1]
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 0 PID: 31648 Comm: syz-executor.0 Not tainted 6.9.0-rc4-next-20240417-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
RIP: 0010:__fib6_rule_action net/ipv6/fib6_rules.c:237 [inline]
RIP: 0010:fib6_rule_action+0x241/0x7b0 net/ipv6/fib6_rules.c:267
Code: 02 00 00 49 8d 9f d8 00 00 00 48 89 d8 48 c1 e8 03 42 80 3c 20 00 74 08 48 89 df e8 f9 32 bf f7 48 8b 1b 48 89 d8 48 c1 e8 03 <42> 80 3c 20 00 74 08 48 89 df e8 e0 32 bf f7 4c 8b 03 48 89 ef 4c
RSP: 0018:ffffc9000fc1f2f0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 1a772f98c8186700
RDX: 0000000000000003 RSI: ffffffff8bcac4e0 RDI: ffffffff8c1f9760
RBP: ffff8880673fb980 R08: ffffffff8fac15ef R09: 1ffffffff1f582bd
R10: dffffc0000000000 R11: fffffbfff1f582be R12: dffffc0000000000
R13: 0000000000000080 R14: ffff888076509000 R15: ffff88807a029a00
FS: 00007f55e82ca6c0(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b31d23000 CR3: 0000000022b66000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
fib_rules_lookup+0x62c/0xdb0 net/core/fib_rules.c:317
fib6_rule_lookup+0x1fd/0x790 net/ipv6/fib6_rules.c:108
ip6_route_output_flags_noref net/ipv6/route.c:2637 [inline]
ip6_route_output_flags+0x38e/0x610 net/ipv6/route.c:2649
ip6_route_output include/net/ip6_route.h:93 [inline]
ip6_dst_lookup_tail+0x189/0x11a0 net/ipv6/ip6_output.c:1120
ip6_dst_lookup_flow+0xb9/0x180 net/ipv6/ip6_output.c:1250
sctp_v6_get_dst+0x792/0x1e20 net/sctp/ipv6.c:326
sctp_transport_route+0x12c/0x2e0 net/sctp/transport.c:455
sctp_assoc_add_peer+0x614/0x15c0 net/sctp/associola.c:662
sctp_connect_new_asoc+0x31d/0x6c0 net/sctp/socket.c:1099
__sctp_connect+0x66d/0xe30 net/sctp/socket.c:1197
sctp_connect net/sctp/socket.c:4819 [inline]
sctp_inet_connect+0x149/0x1f0 net/sctp/socket.c:4834
__sys_connect_file net/socket.c:2048 [inline]
__sys_connect+0x2df/0x310 net/socket.c:2065
__do_sys_connect net/socket.c:2075 [inline]
__se_sys_connect net/socket.c:2072 [inline]
__x64_sys_connect+0x7a/0x90 net/socket.c:2072
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fixes: 5e5f3f0f8013 ("[IPV6] ADDRCONF: Convert ipv6_get_saddr() to ipv6_dev_get_saddr().")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240507163145.835254-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|