| Age | Commit message (Collapse) | Author |
|---|
|
At the moment we have some complex code for determining if a VFE requires a
power-domain attachment. Particularly discordant in this scheme is the
subtle reliance on VFE and VFE Lite declaration ordering in our resources.
VFE id is used to determine if a VFE is lite or not and consequently if a
VFE requires power-domain attachment. VFE Lite though is not a correct
delineation between power-domain and non power-domain state since early
SoCs have neither VFE Lite nor power-domains attached to VFEs.
Introduce has_pd to the VFE resource structure to allow the CAMSS code to
understand if it needs to try to attach a power-domain for a given VFE.
As a side-effect from this we no longer need to care about VFE Lite or
non-Lite or the id number associated with either and which order the
VFE/VFE Lite was declared in.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The function stk1160_dbg gets called too many times, which causes
the output to get flooded with messages. Since stk1160_dbg uses
printk, it is now replaced with printk_ratelimited.
Suggested-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Ghanshyam Agrawal <ghanshyam1898@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The dma_q->p_left_data alloced by kzalloc should be freed in all the
following error handling paths. However, it hasn't been freed in the
allocation error paths of dev->video_mode.isoc_ctl.urb and
dev->video_mode.isoc_ctl.transfer_buffer.
On the other hand, the dma_q->p_left_data did be freed in the
error-handling paths after that of dev->video_mode.isoc_ctl.urb and
dev->video_mode.isoc_ctl.transfer_buffer, by calling
cx231xx_uninit_isoc(dev). So the same free operation should be done in
error-handling paths of those two allocation.
Fixes: 64fbf4445526 ("[media] cx231xx: Added support for Carraera, Shelby, RDx_253S and VIDEO_GRABBER")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The StarFive Camera Subsystem is only present on the StarFive JH7110
SoC. Hence add a dependency on ARCH_STARFIVE, to prevent asking the
user about this driver when configuring a kernel without StarFive SoC
support.
Fixes: bba185d141b1 ("media: staging: media: starfive: camss: Add core driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The Chips&Media Wave 5 Series multi-standard codec IP is currently only
supported on Texas Instruments K3 architecture. Hence add a dependency on
ARCH_K3, to prevent asking the user about this driver when configuring a
kernel without Texas Instruments K3 Multicore SoC support.
Fixes: 9707a6254a8a ("media: chips-media: wave5: Add the v4l2 layer")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: small update in commit log, and reformatted the Fixes tag]
|
|
These > comparisons should be >=. The formats->fmts[] array is either
a pointer to isp_formats_sink[] or isp_formats_source[] respectively.
Fixes: e57854628f58 ("media: staging: media: starfive: camss: Add ISP driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Changhuang Liang <changhuang.liang@starfivetech.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
For dmabuf import users to be able to use the vaddr from another
videobuf2-dma-sg source, the exporter needs to set a proper vaddr on
vb2_dma_sg_dmabuf_ops_vmap callback. This patch adds vmap on map if
buf->vaddr was not set.
Cc: stable@kernel.org
Fixes: 7938f4218168 ("dma-buf-map: Rename to iosys-map")
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add AV1 information in visl documentation.
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Let the visl test driver accept the AV1 pixel format.
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Defines prefixed with "CONFIG" should be limited to proper Kconfig options,
that are introduced in a Kconfig file.
In the driver code, there is a define for CONFIG_VB2_GSC_DMA_CONTIG, but
this is not used anywhere in the code.
Just remove this unused definition.
No functional change.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Instead of walking the entire parent node for something that has the
right compatible, use the scp_get() function provided by the MediaTek
SCP remoteproc driver to retrieve a handle to mtk_scp through the
devicetree "mediatek,scp" (phandle) property.
In case of multi-core SCP, this also allows to select a specific core.
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The MDP3 RDMA needs to communicate with the SCP remote processor: allow
specifying a phandle to a SCP core.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
v4l2_async_unbind_subdev_one(), which is called in the line
following the list_move() operation contains list_move_tail()
for the same entry and overrides anything list_move() did.
Thus it can be removed.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The list deletion call dropped here is already called from the
helper function in the line before. Having a second list_del()
call results in either a warning (with CONFIG_DEBUG_LIST=y):
list_del corruption, c46c8198->next is LIST_POISON1 (00000100)
If CONFIG_DEBUG_LIST is disabled the operation results in a
kernel error due to NULL pointer dereference.
Fixes: 28a1295795d8 ("media: v4l: async: Allow multiple connections between entities")
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Fix a simple indentation issue in the v4l2-subdev.h header.
Fixes: f57fa2959244 ("media: v4l2-subdev: Add new ioctl for client capabilities")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Use V4L2 CCI for accessing device's registers. The 8-bit compatibility
read option is removed but this is supported by regmap through other
means.
Also the CCS register definitions are re-generated with V4L2 CCI
definitions. The older SMIA++ register definitions have been manually
converted.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Separate CCS static data read-only register access in ccs-reg-access.c by
naming them differently.
The code in this file generally deals with reading and writing registers
where as static data (when it comes to ccs_static_data_read_ro_reg())
contains the read-only register values but no hardware registers are
accessed in that case.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Generate register definitions that are fit for use with V4L2 CCI.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add CCI_REG_WIDTH() macro to obtain register width in bits and similarly,
CCI_REG_WIDTH_BYTES() to obtain it in bytes.
Also add CCI_REG_ADDR() macro to obtain the address of a register.
Use both macros in v4l2-cci.c, too.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Provide a few bits for drivers to store private information on register
definitions.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
linux/bits.h is needed for GENMASK(). Include it.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The isc_try_fse() function, called from isc_validate(), takes two
parameters, an isc_device pointer, and a v4l2_subdev_state pointer. The
isc_device is accessed but not modified by the function. The state is
modified, including the struct v4l2_subdev_pad_config array it points
to, but they are then never used by the caller. Furthermore, the V4L2
subdev operation called by isc_try_fse() doesn't modify the subdev it is
called on. The isc_try_fse() function has thus no effect, and can just
be dropped.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Eugen Hristev <eugen.hristev@collabora.com>
Tested-by: Eugen Hristev <eugen.hristev@collabora.com>
[Sakari Ailus: Resolve conflicts due to API changes.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Document that sub-device initialisation needs to complete before the async
sub-device is registered as there is no further driver action needed
before the sensor becomes accessible via the UAPI.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
As the sensor may be accessible right after its async sub-device is
registered, enable runtime PM before doing so.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
A number of CCS register value limits are in ireal or float format.
Also convert them to integers for easier interpretation.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
As the sensor device maybe accessible right after its async sub-device is
registered, such as ipu-bridge will try to power up sensor by sensor's
client device's runtime PM from the async notifier callback, if runtime PM
is not enabled, it will fail.
So runtime PM should be ready before its async sub-device is registered
and accessible by others.
Fixes: d3f863a63fe4 ("media: i2c: Add ov9734 image sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
As the sensor device maybe accessible right after its async sub-device is
registered, such as ipu-bridge will try to power up sensor by sensor's
client device's runtime PM from the async notifier callback, if runtime PM
is not enabled, it will fail.
So runtime PM should be ready before its async sub-device is registered
and accessible by others.
Fixes: 7ee850546822 ("media: Add sensor driver support for the ov13b10 camera.")
Cc: stable@vger.kernel.org
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
As the sensor device maybe accessible right after its async sub-device is
registered, such as ipu-bridge will try to power up sensor by sensor's
client device's runtime PM from the async notifier callback, if runtime PM
is not enabled, it will fail.
So runtime PM should be ready before its async sub-device is registered
and accessible by others.
It also sets the runtime PM status to active as the sensor was turned
on by i2c-core.
Fixes: 0827b58dabff ("media: i2c: add ov01a10 image sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
As the sensor device maybe accessible right after its async sub-device is
registered, such as ipu-bridge will try to power up sensor by sensor's
client device's runtime PM from the async notifier callback, if runtime PM
is not enabled, it will fail.
So runtime PM should be ready before its async sub-device is registered
and accessible by others.
Fixes: df0b5c4a7ddd ("media: add imx355 camera sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
This V4L2 subdev driver enables Digital Camera Memory Interface
Pixel Processor(DCMIPP) of STMicroelectronics STM32 SoC series.
Signed-off-by: Hugues Fruchet <hugues.fruchet@foss.st.com>
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: remove empty line at end of source]
|
|
Add the entry related to the STM32 MEDIA DCMIPP driver within the
MAINTAINERS file.
Add myself as maintainer of the DCMI driver as well.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Sakari Ailus: Arrange files alphabetically.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add the yaml binding for the ST Microelectronics STM32 DCMIPP
(Digital Camera Memory Interface Pixel Processor)
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Allow parsing of the v4l2_fwnode properties from the DT and addition
of those properties (such as orientation, rotation).
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Any V4L2 subdevice that implements controls and declares
V4L2_SUBDEV_FL_HAS_DEVNODE should also declare V4L2_SUBDEV_FL_HAS_EVENTS
and implement subscribe_event and unsubscribe_event hooks.
With that done, v4l2-compliance testing is now ok.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add support of MEDIA_BUS_FMT_Y8_1X8.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
link_frequency variable within struct mipid02_dev seems to have never
been used hence remove it.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Use MIPI data-type macros.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Store formats information within pad allowing to simplify further more
the driver (mutex / format store within the driver structure no more
necessary).
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
[Sakari Ailus: Address init_cfg -> init_state API change.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Use cci_read & cci_write functions for accessing registers.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
As explained in the following series, subdev do not have to keep
track of their streaming status:
https://lore.kernel.org/linux-media/20230914181704.4811-1-laurent.pinchart@ideasonboard.com/
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
[Sakari Ailus: Remove redundant local variable in mipid02_set_fmt.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Use the helper v4l2_get_link_freq instead of performing manually
check of the LINK_FREQ or PIXELRATE ctrls.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Use a copy of the struct v4l2_subdev_format when propagating
format from the sink to source pad in order to avoid impacting the
sink format returned to the application.
Thanks to Jacopo Mondi for pointing the issue.
Fixes: 6c01e6f3f27b ("media: st-mipid02: Propagate format from sink to source pad")
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Parse MIPI DisCo for Imaging properties "mipi-img-lens-focus" and
"mipi-img-flash-leds" for VCMs and flash LEDs.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The subdev .init_cfg() operation is affected by two issues:
- It has long been extended to initialize a whole v4l2_subdev_state
instead of just a v4l2_subdev_pad_config, but its name has stuck
around.
- Despite operating on a whole subdev state and not being directly
exposed to the subdev users (either in-kernel or through the userspace
API), .init_cfg() is categorized as a subdev pad operation.
This participates in making the subdev API confusing for new developers.
Fix it by renaming the operation to .init_state(), and make it a subdev
internal operation.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Michael Riesch <michael.riesch@wolfvision.net> # for imx415
Acked-by: Shuah Khan <skhan@linuxfoundation.org> # for vimc
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
[Sakari Ailus: Resolved a conflict in Renesas vsp1 driver.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The THP7312 is an external camera ISP from THine. Add a V4L2 subdev
driver for it.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Sakari Ailus: squash a patch to fix missing mutex_unlock by Laurent.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The THP7312 is an external ISP from THine. As such, it implements a
large number of parameters to control all aspects of the image
processing. Many of those controls are already standard in V4L2, but
some are fairly device-specific.
Reserve a range of 32 controls for the device. The driver will implement
4 device-specific controls to start with, define and document them. 28
additional device-specific controls should be enough for future
development.
Co-developed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The THP7312 is an external ISP from THine. Add DT bindings for it.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Co-developed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add fwnode_name_eq() to implement the functionality of of_node_name_eq()
on fwnode property API. The same convention of ending the comparison at
'@' (besides NUL) is applied on also both ACPI and swnode. The function
is intended for comparing unit address-less node names on DT and firmware
or swnodes compliant with DT bindings.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Addition of support for the Galaxy Core GC2145 XVGA sensor.
The sensor supports both DVP and CSI-2 interfaces however for
the time being only CSI-2 is implemented.
Configurations are currently based on initialization scripts
coming from Galaxy Core and so for that purpose only 3 static
resolutions are supported:
- 640x480
- 1280x720
- 1600x1200
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Introduction of the Galaxy Core GC2145 XVGA CMOS camera sensor.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
