| Age | Commit message (Collapse) | Author |
|---|
|
The current dlm version detection is very complex due to backwards
compatablilty with earlier dlm protocol versions. It takes some time to
detect if a peer node has a specific DLM version. If it's not detected,
we just cut the socket connection. There could be cases where the local
node has not detected the version yet, but the peer node has. In these
cases, we are trying to shutdown the dlm connection with a FIN/ACK message
exchange to be sure the other peer is ready to shutdown the connection on
dlm application level. However this mechanism is only available on DLM
protocol version 3.2 and we need to be sure the DLM version is detected
before.
To make it more robust we introduce a a "best effort" wait to wait for the
version detection before shutdown the dlm connection. This need to be
done before the kthread recoverd for recovery handling is stopped,
because recovery handling will trigger enough messages to have a version
detection going on.
It is a corner case which was detected by modprobe dlm_locktroture module
and rmmod dlm_locktorture module directly afterwards (in a looping
behaviour). In practice probably nobody would leave a lockspace immediately
after joining it.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
This patch ignores unexpected RCOM_NAMES/RCOM_STATUS messages.
To be backwards compatible, those messages are not part of the new
reliable DLM OPTS encapsulation header, and have their own
retransmit handling using sequence number matching When we get
unexpected non dlm opts messages, we should allow them and let
RCOM message handling filter them out using sequence numbers.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
This patch mostly reverts commit 4f567acb0b86 ("fs: dlm: remove socket
shutdown handling"). There can be situations where the dlm midcomms nodes
hash and lowcomms connection hash are not equal, but we need to guarantee
that the lowcomms are all closed on a last release of a dlm lockspace,
when a shutdown is invoked. This patch guarantees that we always close
all sockets managed by the lowcomms connection hash, and calls shutdown
for the last message sent. This ensures we don't cut the socket, which
could cause the peer to get a connection reset.
In future we should try to merge the midcomms/lowcomms hashes into one
hash and not handle both in separate hashes.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
This patch moves to send a ack back for receiving a FIN message only
when we are in valid states. In other cases and there might be a sender
waiting for a ack we just let it timeout at the senders time and
hopefully all other cleanups will remove the FIN message on their
sending queue. As an example we should never send out an ACK being in
LAST_ACK state or we cannot assume a working socket communication when
we are in CLOSED state.
Cc: stable@vger.kernel.org
Fixes: 489d8e559c65 ("fs: dlm: add reliable connection if reconnect")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
This patch moves the send fin handling, which should appear in a specific
state change, into the state change handling while the per node
state_lock is held. I experienced issues with other messages because
we changed the state and a fin message was sent out in a different state.
Cc: stable@vger.kernel.org
Fixes: 489d8e559c65 ("fs: dlm: add reliable connection if reconnect")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
Similar to the stop tx flag, the rx flag should warn about a dlm message
being received at DLM_FIN state change, when we are assuming no other
dlm application messages. If we receive a FIN message and we are in the
state DLM_FIN_WAIT2 we call midcomms_node_reset() which puts the
midcomms node into DLM_CLOSED state. Afterwards we should not set the
DLM_NODE_FLAG_STOP_RX flag any more. This patch changes the setting
DLM_NODE_FLAG_STOP_RX in those state changes when we receive a FIN
message and we assume there will be no other dlm application messages
received until we hit DLM_CLOSED state.
Cc: stable@vger.kernel.org
Fixes: 489d8e559c65 ("fs: dlm: add reliable connection if reconnect")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
This patch sets the stop tx flag before we commit the dlm message.
This flag will report about unexpected transmissions after we
send the DLM_FIN message out, which should be the last message sent.
When we commit the dlm fin message, it could be that we already
got an ack back and the CLOSED state change already happened.
We should not set this flag when we are in CLOSED state. To avoid this
race we simply set the tx flag before the state change can be in
progress by moving it before dlm_midcomms_commit_mhandle().
Cc: stable@vger.kernel.org
Fixes: 489d8e559c65 ("fs: dlm: add reliable connection if reconnect")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
If we release a midcomms node structure, there should be nothing left
inside the dlm midcomms send queue. However, sometimes this is not true
because I believe some DLM_FIN message was not acked... if we run
into a shutdown timeout, then we should be sure there is no pending send
dlm message inside this queue when releasing midcomms node structure.
Cc: stable@vger.kernel.org
Fixes: 489d8e559c65 ("fs: dlm: add reliable connection if reconnect")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
While working on processing dlm message in softirq context I experienced
the following KASAN use-after-free warning:
[ 151.760477] ==================================================================
[ 151.761803] BUG: KASAN: use-after-free in dlm_midcomms_commit_mhandle+0x19d/0x4b0
[ 151.763414] Read of size 4 at addr ffff88811a980c60 by task lock_torture/1347
[ 151.765284] CPU: 7 PID: 1347 Comm: lock_torture Not tainted 6.1.0-rc4+ #2828
[ 151.766778] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.16.0-3.module+el8.7.0+16134+e5908aa2 04/01/2014
[ 151.768726] Call Trace:
[ 151.769277] <TASK>
[ 151.769748] dump_stack_lvl+0x5b/0x86
[ 151.770556] print_report+0x180/0x4c8
[ 151.771378] ? kasan_complete_mode_report_info+0x7c/0x1e0
[ 151.772241] ? dlm_midcomms_commit_mhandle+0x19d/0x4b0
[ 151.773069] kasan_report+0x93/0x1a0
[ 151.773668] ? dlm_midcomms_commit_mhandle+0x19d/0x4b0
[ 151.774514] __asan_load4+0x7e/0xa0
[ 151.775089] dlm_midcomms_commit_mhandle+0x19d/0x4b0
[ 151.775890] ? create_message.isra.29.constprop.64+0x57/0xc0
[ 151.776770] send_common+0x19f/0x1b0
[ 151.777342] ? remove_from_waiters+0x60/0x60
[ 151.778017] ? lock_downgrade+0x410/0x410
[ 151.778648] ? __this_cpu_preempt_check+0x13/0x20
[ 151.779421] ? rcu_lockdep_current_cpu_online+0x88/0xc0
[ 151.780292] _convert_lock+0x46/0x150
[ 151.780893] convert_lock+0x7b/0xc0
[ 151.781459] dlm_lock+0x3ac/0x580
[ 151.781993] ? 0xffffffffc0540000
[ 151.782522] ? torture_stop+0x120/0x120 [dlm_locktorture]
[ 151.783379] ? dlm_scan_rsbs+0xa70/0xa70
[ 151.784003] ? preempt_count_sub+0xd6/0x130
[ 151.784661] ? is_module_address+0x47/0x70
[ 151.785309] ? torture_stop+0x120/0x120 [dlm_locktorture]
[ 151.786166] ? 0xffffffffc0540000
[ 151.786693] ? lockdep_init_map_type+0xc3/0x360
[ 151.787414] ? 0xffffffffc0540000
[ 151.787947] torture_dlm_lock_sync.isra.3+0xe9/0x150 [dlm_locktorture]
[ 151.789004] ? torture_stop+0x120/0x120 [dlm_locktorture]
[ 151.789858] ? 0xffffffffc0540000
[ 151.790392] ? lock_torture_cleanup+0x20/0x20 [dlm_locktorture]
[ 151.791347] ? delay_tsc+0x94/0xc0
[ 151.791898] torture_ex_iter+0xc3/0xea [dlm_locktorture]
[ 151.792735] ? torture_start+0x30/0x30 [dlm_locktorture]
[ 151.793606] lock_torture+0x177/0x270 [dlm_locktorture]
[ 151.794448] ? torture_dlm_lock_sync.isra.3+0x150/0x150 [dlm_locktorture]
[ 151.795539] ? lock_torture_stats+0x80/0x80 [dlm_locktorture]
[ 151.796476] ? do_raw_spin_lock+0x11e/0x1e0
[ 151.797152] ? mark_held_locks+0x34/0xb0
[ 151.797784] ? _raw_spin_unlock_irqrestore+0x30/0x70
[ 151.798581] ? __kthread_parkme+0x79/0x110
[ 151.799246] ? trace_preempt_on+0x2a/0xf0
[ 151.799902] ? __kthread_parkme+0x79/0x110
[ 151.800579] ? preempt_count_sub+0xd6/0x130
[ 151.801271] ? __kasan_check_read+0x11/0x20
[ 151.801963] ? __kthread_parkme+0xec/0x110
[ 151.802630] ? lock_torture_stats+0x80/0x80 [dlm_locktorture]
[ 151.803569] kthread+0x192/0x1d0
[ 151.804104] ? kthread_complete_and_exit+0x30/0x30
[ 151.804881] ret_from_fork+0x1f/0x30
[ 151.805480] </TASK>
[ 151.806111] Allocated by task 1347:
[ 151.806681] kasan_save_stack+0x26/0x50
[ 151.807308] kasan_set_track+0x25/0x30
[ 151.807920] kasan_save_alloc_info+0x1e/0x30
[ 151.808609] __kasan_slab_alloc+0x63/0x80
[ 151.809263] kmem_cache_alloc+0x1ad/0x830
[ 151.809916] dlm_allocate_mhandle+0x17/0x20
[ 151.810590] dlm_midcomms_get_mhandle+0x96/0x260
[ 151.811344] _create_message+0x95/0x180
[ 151.811994] create_message.isra.29.constprop.64+0x57/0xc0
[ 151.812880] send_common+0x129/0x1b0
[ 151.813467] _convert_lock+0x46/0x150
[ 151.814074] convert_lock+0x7b/0xc0
[ 151.814648] dlm_lock+0x3ac/0x580
[ 151.815199] torture_dlm_lock_sync.isra.3+0xe9/0x150 [dlm_locktorture]
[ 151.816258] torture_ex_iter+0xc3/0xea [dlm_locktorture]
[ 151.817129] lock_torture+0x177/0x270 [dlm_locktorture]
[ 151.817986] kthread+0x192/0x1d0
[ 151.818518] ret_from_fork+0x1f/0x30
[ 151.819369] Freed by task 1336:
[ 151.819890] kasan_save_stack+0x26/0x50
[ 151.820514] kasan_set_track+0x25/0x30
[ 151.821128] kasan_save_free_info+0x2e/0x50
[ 151.821812] __kasan_slab_free+0x107/0x1a0
[ 151.822483] kmem_cache_free+0x204/0x5e0
[ 151.823152] dlm_free_mhandle+0x18/0x20
[ 151.823781] dlm_mhandle_release+0x2e/0x40
[ 151.824454] rcu_core+0x583/0x1330
[ 151.825047] rcu_core_si+0xe/0x20
[ 151.825594] __do_softirq+0xf4/0x5c2
[ 151.826450] Last potentially related work creation:
[ 151.827238] kasan_save_stack+0x26/0x50
[ 151.827870] __kasan_record_aux_stack+0xa2/0xc0
[ 151.828609] kasan_record_aux_stack_noalloc+0xb/0x20
[ 151.829415] call_rcu+0x4c/0x760
[ 151.829954] dlm_mhandle_delete+0x97/0xb0
[ 151.830718] dlm_process_incoming_buffer+0x2fc/0xb30
[ 151.831524] process_dlm_messages+0x16e/0x470
[ 151.832245] process_one_work+0x505/0xa10
[ 151.832905] worker_thread+0x67/0x650
[ 151.833507] kthread+0x192/0x1d0
[ 151.834046] ret_from_fork+0x1f/0x30
[ 151.834900] The buggy address belongs to the object at ffff88811a980c30
which belongs to the cache dlm_mhandle of size 88
[ 151.836894] The buggy address is located 48 bytes inside of
88-byte region [ffff88811a980c30, ffff88811a980c88)
[ 151.839007] The buggy address belongs to the physical page:
[ 151.839904] page:0000000076cf5d62 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11a980
[ 151.841378] flags: 0x8000000000000200(slab|zone=2)
[ 151.842141] raw: 8000000000000200 0000000000000000 dead000000000122 ffff8881089b43c0
[ 151.843401] raw: 0000000000000000 0000000000220022 00000001ffffffff 0000000000000000
[ 151.844640] page dumped because: kasan: bad access detected
[ 151.845822] Memory state around the buggy address:
[ 151.846602] ffff88811a980b00: fb fb fb fb fc fc fc fc fa fb fb fb fb fb fb fb
[ 151.847761] ffff88811a980b80: fb fb fb fc fc fc fc fa fb fb fb fb fb fb fb fb
[ 151.848921] >ffff88811a980c00: fb fb fc fc fc fc fa fb fb fb fb fb fb fb fb fb
[ 151.850076] ^
[ 151.851085] ffff88811a980c80: fb fc fc fc fc fa fb fb fb fb fb fb fb fb fb fb
[ 151.852269] ffff88811a980d00: fc fc fc fc fa fb fb fb fb fb fb fb fb fb fb fc
[ 151.853428] ==================================================================
[ 151.855618] Disabling lock debugging due to kernel taint
It is accessing a mhandle in dlm_midcomms_commit_mhandle() and the mhandle
was freed by a call_rcu() call in dlm_process_incoming_buffer(),
dlm_mhandle_delete(). It looks like it was freed because an ack of
this message was received. There is a short race between committing the
dlm message to be transmitted and getting an ack back. If the ack is
faster than returning from dlm_midcomms_commit_msg_3_2(), then we run
into a use-after free because we still need to reference the mhandle when
calling srcu_read_unlock().
To avoid that, we don't allow that mhandle to be freed between
dlm_midcomms_commit_msg_3_2() and srcu_read_unlock() by using rcu read
lock. We can do that because mhandle is protected by rcu handling.
Cc: stable@vger.kernel.org
Fixes: 489d8e559c65 ("fs: dlm: add reliable connection if reconnect")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
The scand kthread can send dlm messages out, especially dlm remove
messages to free memory for unused rsb on other nodes. To send out dlm
messages, midcomms must be initialized. This patch moves the midcomms
start before scand is started.
Cc: stable@vger.kernel.org
Fixes: e7fd41792fc0 ("[DLM] The core of the DLM for GFS2/CLVM")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
Now that the SRCU Kconfig option is unconditionally selected, there is
no longer any point in selecting it. Therefore, remove the "select SRCU"
Kconfig statements.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
It should check 'cb_cache', after calling kmem_cache_create("dlm_cb").
Fixes: 61bed0baa4db ("fs: dlm: use a non-static queue for callbacks")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Pass only an initialized perf event attribute to the LSM hook
- Fix a use-after-free on the perf syscall's error path
- A potential integer overflow fix in amd_core_pmu_init()
- Fix the cgroup events tracking after the context handling rewrite
- Return the proper value from the inherit_event() function on error
* tag 'perf_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Call LSM hook after copying perf_event_attr
perf: Fix use-after-free in error path
perf/x86/amd: fix potential integer overflow on shift of a int
perf/core: Fix cgroup events tracking
perf core: Return error pointer if inherit_event() fails to find pmu_ctx
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Two fixes to correct how kprobes handles INT3 now that they're added
by other functionality like the rethunks and not only kgdb
- Remove __init section markings of two functions which are referenced
by a function in the .text section
* tag 'x86_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kprobes: Fix optprobe optimization check with CONFIG_RETHUNK
x86/kprobes: Fix kprobes instruction boudary check with CONFIG_RETHUNK
x86/calldepth: Fix incorrect init section references
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Borislav Petkov:
- Prevent the leaking of a debug timer in futex_waitv()
- A preempt-RT mutex locking fix, adding the proper acquire semantics
* tag 'locking_urgent_for_v6.2_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Fix futex_waitv() hrtimer debug object leak on kcalloc error
rtmutex: Add acquire semantics for rtmutex lock acquisition slow path
|
|
Pull drm fixes from Daniel Vetter:
"I'm just back from the mountains, and Dave is out at the beach and
should be back in a week again. Just i915 fixes and since Rodrigo
bothered to make the pull last week I figured I should warm up gpg and
forward this in a nice signed tag as a new years present!
- i915 fixes for newer platforms
- i915 locking rework to not give up in vm eviction fallback path too
early"
* tag 'drm-fixes-2023-01-01' of git://anongit.freedesktop.org/drm/drm:
drm/i915/dsi: fix MIPI_BKLT_EN_1 native GPIO index
drm/i915/dsi: add support for ICL+ native MIPI GPIO sequence
drm/i915/uc: Fix two issues with over-size firmware files
drm/i915: improve the catch-all evict to handle lock contention
drm/i915: Remove __maybe_unused from mtl_info
drm/i915: fix TLB invalidation for Gen12.50 video and compute engines
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- fix TLB invalidation for DG2 and newer platforms. (Andrzej)
- Remove __maybe_unused from mtl_info (Lucas)
- improve the catch-all evict to handle lock contention (Matt Auld)
- Fix two issues with over-size (GuC/HuC) firmware files (John)
- Fix DSI resume issues on ICL+ (Jani)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y662ijDHrZCjTFla@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix broken BuildID
- Add srcrpm-pkg to the help message
- Fix the option order for modpost built with musl libc
- Fix the build dependency of rpm-pkg for openSUSE
* tag 'kbuild-fixes-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
fixdep: remove unneeded <stdarg.h> inclusion
kbuild: sort single-targets alphabetically again
kbuild: rpm-pkg: add libelf-devel as alternative for BuildRequires
kbuild: Fix running modpost with musl libc
kbuild: add a missing line for help message
.gitignore: ignore *.rpm
arch: fix broken BuildID for arm64 and riscv
kconfig: Add static text for search information in help menu
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fix from Damien Le Moal:
"A single fix to address an issue with wake from suspend with PCS
adapters, from Adam"
* tag 'ata-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: ahci: Fix PCS quirk application for suspend
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These are new ACPI IRQ override quirks, low-power S0 idle (S0ix)
support adjustments and ACPI backlight handling fixes, mostly for
platforms using AMD chips.
Specifics:
- Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo
14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund, Erik
Schumacher).
- Adjust ACPI video detection fallback path to prevent
non-operational ACPI backlight devices from being created on
systems where the native driver does not detect a suitable panel
(Mario Limonciello).
- Fix Apple GMUX backlight detection (Hans de Goede).
- Add a low-power S0 idle (S0ix) handling quirk for HP Elitebook 865
and stop using AMD-specific low-power S0 idle code path for systems
with Rembrandt chips and newer (Mario Limonciello)"
* tag 'acpi-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: x86: s2idle: Stop using AMD specific codepath for Rembrandt+
ACPI: x86: s2idle: Force AMD GUID/_REV 2 on HP Elitebook 865
ACPI: video: Fix Apple GMUX backlight detection
ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks
ACPI: resource: do IRQ override on Lenovo 14ALC7
ACPI: resource: do IRQ override on XMG Core 15
ACPI: video: Don't enable fallback path for creating ACPI backlight by default
drm/amd/display: Report to ACPI video if no panels were found
ACPI: video: Allow GPU drivers to report no panels
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just a few small fixes:
- A regression fix for HDMI audio on HD-audio AMD codecs
- Fixes for LINE6 MIDI handling
- HD-audio quirk for Dell laptops"
* tag 'sound-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/hdmi: Static PCM mapping again with AMD HDMI codecs
ALSA: hda/realtek: Apply dual codec fixup for Dell Latitude laptops
ALSA: line6: fix stack overflow in line6_midi_transmit
ALSA: line6: correct midi status byte when receiving data from podxt
|
|
Merge ACPI resource handling quirks and ACPI backlight handling fixes
for 6.2-rc2:
- Add ACPI IRQ override quirks for Asus ExpertBook B2502, Lenovo
14ALC7, and XMG Core 15 (Hans de Goede, Adrian Freund, Erik
Schumacher).
- Adjust ACPI video detection fallback path to prevent non-operational
ACPI backlight devices from being created on systems where the native
driver does not detect a suitable panel (Mario Limonciello).
- Fix Apple GMUX backlight detection (Hans de Goede).
* acpi-resource:
ACPI: resource: Add Asus ExpertBook B2502 to Asus quirks
ACPI: resource: do IRQ override on Lenovo 14ALC7
ACPI: resource: do IRQ override on XMG Core 15
* acpi-video:
ACPI: video: Fix Apple GMUX backlight detection
ACPI: video: Don't enable fallback path for creating ACPI backlight by default
drm/amd/display: Report to ACPI video if no panels were found
ACPI: video: Allow GPU drivers to report no panels
|
|
Due to copy-paste fail, MIPI_BKLT_EN_1 would always use PPS index 1,
never 0. Fix the sloppiest commit in recent memory.
Fixes: 963bbdb32b47 ("drm/i915/dsi: add support for ICL+ native MIPI GPIO sequence")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221220140105.313333-1-jani.nikula@intel.com
(cherry picked from commit a561933c571798868b5fa42198427a7e6df56c09)
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Starting from ICL, the default for MIPI GPIO sequences seems to be using
native GPIOs i.e. GPIOs available in the GPU. These native GPIOs reuse
many pins that quite frankly seem scary to poke based on the VBT
sequences. We pretty much have to trust that the board is configured
such that the relevant HPD, PP_CONTROL and GPIO bits aren't used for
anything else.
MIPI sequence v4 also adds a flag to fall back to non-native sequences.
v5:
- Wrap SHOTPLUG_CTL_DDI modification in spin_lock() in icp_irq_handler()
too (Ville)
- References instead of Closes issue 6131 because this does not fix everything
v4:
- Wrap SHOTPLUG_CTL_DDI modification in spin_lock_irq() (Ville)
v3:
- Fix -Wbitwise-conditional-parentheses (kernel test robot <lkp@intel.com>)
v2:
- Fix HPD pin output set (impacts GPIOs 0 and 5)
- Fix GPIO data output direction set (impacts GPIOs 4 and 9)
- Reduce register accesses to single intel_de_rwm()
References: https://gitlab.freedesktop.org/drm/intel/-/issues/6131
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219105955.4014451-1-jani.nikula@intel.com
(cherry picked from commit f087cfe6fcff58044f7aa3b284965af47f472fb0)
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
This is unneeded since commit 69304379ff03 ("fixdep: use fflush() and
ferror() to ensure successful write to files").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
This was previously alphabetically sorted. Sort it again.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
|
|
Guoqing Jiang reports that openSUSE cannot compile the kernel rpm due
to "BuildRequires: elfutils-libelf-devel" added by commit 8818039f959b
("kbuild: add ability to make source rpm buildable using koji").
The relevant package name in openSUSE is libelf-devel.
Add it as an alternative package.
BTW, if it is impossible to solve the build requirement, the final
resort would be:
$ make RPMOPTS=--nodeps rpm-pkg
This passes --nodeps to the rpmbuild command so it will not verify
build dependencies. This is useful to test rpm builds on non-rpm
system. On Debian/Ubuntu, for example, you can install rpmbuild by
'apt-get install rpm'.
NOTE1:
Likewise, it is possible to bypass the build dependency check for
debian package builds:
$ make DPKG_FLAGS=-d deb-pkg
NOTE2:
The 'or' operator is supported since RPM 4.13. So, old distros such
as CentOS 7 will break. I suggest installing newer rpmbuild in such
cases.
Link: https://lore.kernel.org/linux-kbuild/ee227d24-9c94-bfa3-166a-4ee6b5dfea09@linux.dev/T/#u
Fixes: 8818039f959b ("kbuild: add ability to make source rpm buildable using koji")
Reported-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
|
|
commit 3d57e1b7b1d4 ("kbuild: refactor the prerequisites of the modpost
rule") moved 'vmlinux.o' inside modpost-args, possibly before some of
the other options. However, getopt() in musl libc follows POSIX and
stops looking for options upon reaching the first non-option argument.
As a result, the '-T' option is misinterpreted as a positional argument,
and the build fails:
make -f ./scripts/Makefile.modpost
scripts/mod/modpost -E -o Module.symvers vmlinux.o -T modules.order
-T: No such file or directory
make[1]: *** [scripts/Makefile.modpost:137: Module.symvers] Error 1
make: *** [Makefile:1960: modpost] Error 2
The fix is to move all options before 'vmlinux.o' in modpost-args.
Fixes: 3d57e1b7b1d4 ("kbuild: refactor the prerequisites of the modpost rule")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The help message line for building the source RPM package was missing.
Added it.
Signed-off-by: Jun ASAKA <JunASAKA@zzy040330.moe>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Previously, *.rpm files were created under $HOME/rpmbuild/, but since
commit 8818039f959b ("kbuild: add ability to make source rpm buildable
using koji"), srcrpm-pkg creates the source rpm in the kernel tree
because it sets '_srcrpmdir'.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Dennis Gilmore reports that the BuildID is missing in the arm64 vmlinux
since commit 994b7ac1697b ("arm64: remove special treatment for the
link order of head.o").
The issue is that the type of .notes section, which contains the BuildID,
changed from NOTES to PROGBITS.
Ard Biesheuvel figured out that whichever object gets linked first gets
to decide the type of a section. The PROGBITS type is the result of the
compiler emitting .note.GNU-stack as PROGBITS rather than NOTE.
While Ard provided a fix for arm64, I want to fix this globally because
the same issue is happening on riscv since commit 2348e6bf4421 ("riscv:
remove special treatment for the link order of head.o"). This problem
will happen in general for other architectures if they start to drop
unneeded entries from scripts/head-object-list.txt.
Discard .note.GNU-stack in include/asm-generic/vmlinux.lds.h.
Link: https://lore.kernel.org/lkml/CAABkxwuQoz1CTbyb57n0ZX65eSYiTonFCU8-LCQc=74D=xE=rA@mail.gmail.com/
Fixes: 994b7ac1697b ("arm64: remove special treatment for the link order of head.o")
Fixes: 2348e6bf4421 ("riscv: remove special treatment for the link order of head.o")
Reported-by: Dennis Gilmore <dennis@ausil.us>
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
In the case where a firmware file is too large (e.g. someone
downloaded a web page ASCII dump from github...), the firmware object
is released but the pointer is not zerod. If no other firmware file
was found then release would be called again leading to a double kfree.
Also, the size check was only being applied to the initial firmware
load not any of the subsequent attempts. So move the check into a
wrapper that is used for all loads.
Fixes: 016241168dc5 ("drm/i915/uc: use different ggtt pin offsets for uc loads")
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221221193031.687266-4-John.C.Harrison@Intel.com
(cherry picked from commit 4071d98b296a5bc5fd4b15ec651bd05800ec9510)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The catch-all evict can fail due to object lock contention, since it
only goes as far as trylocking the object, due to us already holding the
vm->mutex. Doing a full object lock here can deadlock, since the
vm->mutex is always our inner lock. Add another execbuf pass which drops
the vm->mutex and then tries to grab the object will the full lock,
before then retrying the eviction. This should be good enough for now to
fix the immediate regression with userspace seeing -ENOSPC from execbuf
due to contended object locks during GTT eviction.
v2 (Mani)
- Also revamp the docs for the different passes.
Testcase: igt@gem_ppgtt@shrink-vs-evict-*
Fixes: 7e00897be8bf ("drm/i915: Add object locking to i915_gem_evict_for_node and i915_gem_evict_something, v2.")
References: https://gitlab.freedesktop.org/drm/intel/-/issues/7627
References: https://gitlab.freedesktop.org/drm/intel/-/issues/7570
References: https://bugzilla.mozilla.org/show_bug.cgi?id=1779558
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Mani Milani <mani@chromium.org>
Cc: <stable@vger.kernel.org> # v5.18+
Reviewed-by: Mani Milani <mani@chromium.org>
Tested-by: Mani Milani <mani@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221216113456.414183-1-matthew.auld@intel.com
(cherry picked from commit 801fa7a81f6da533cc5442fc40e32c72b76cd42a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The attribute __maybe_unused should remain only until the respective
info is not in the pciidlist. The info can't be added together
with its definition because that would cause the driver to automatically
probe for the device, while it's still not ready for that. However once
pciidlist contains it, the attribute can be removed.
Fixes: 7835303982d1 ("drm/i915/mtl: Add MeteorLake PCI IDs")
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221214194944.3670344-1-lucas.demarchi@intel.com
(cherry picked from commit 50490ce05b7a50b0bd4108fa7d6db3ca2972fa83)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
In case of Gen12.50 video and compute engines, TLB_INV registers are
masked - to modify one bit, corresponding bit in upper half of the register
must be enabled, otherwise nothing happens.
Fixes: 77fa9efc16a9 ("drm/i915/xehp: Create separate reg definitions for new MCR registers")
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221214075439.402485-1-andrzej.hajda@intel.com
(cherry picked from commit 4d5cf7b1680a1e6db327e3c935ef58325cbedb2c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Pull block fixes from Jens Axboe:
"Mostly just NVMe, but also a single fixup for BFQ for a regression
that happened during the merge window. In detail:
- NVMe pull requests via Christoph:
- Fix doorbell buffer value endianness (Klaus Jensen)
- Fix Linux vs NVMe page size mismatch (Keith Busch)
- Fix a potential use memory access beyong the allocation limit
(Keith Busch)
- Fix a multipath vs blktrace NULL pointer dereference (Yanjun
Zhang)
- Fix various problems in handling the Command Supported and
Effects log (Christoph Hellwig)
- Don't allow unprivileged passthrough of commands that don't
transfer data but modify logical block content (Christoph
Hellwig)
- Add a features and quirks policy document (Christoph Hellwig)
- Fix some really nasty code that was correct but made smatch
complain (Sagi Grimberg)
- Use-after-free regression in BFQ from this merge window (Yu)"
* tag 'block-6.2-2022-12-29' of git://git.kernel.dk/linux:
nvme-auth: fix smatch warning complaints
nvme: consult the CSE log page for unprivileged passthrough
nvme: also return I/O command effects from nvme_command_effects
nvmet: don't defer passthrough commands with trivial effects to the workqueue
nvmet: set the LBCC bit for commands that modify data
nvmet: use NVME_CMD_EFFECTS_CSUPP instead of open coding it
nvme: fix the NVME_CMD_EFFECTS_CSE_MASK definition
docs, nvme: add a feature and quirk policy document
nvme-pci: update sqsize when adjusting the queue depth
nvme: fix setting the queue depth in nvme_alloc_io_tag_set
block, bfq: fix uaf for bfqq in bfq_exit_icq_bfqq
nvme: fix multipath crash caused by flush request when blktrace is enabled
nvme-pci: fix page size checks
nvme-pci: fix mempool alloc size
nvme-pci: fix doorbell buffer value endianness
|
|
Pull io_uring fixes from Jens Axboe:
- Two fixes for mutex grabbing when the task state is != TASK_RUNNING
(me)
- Check for invalid opcode in io_uring_register() a bit earlier, to
avoid going through the quiesce machinery just to return -EINVAL
later in the process (me)
- Fix for the uapi io_uring header, skipping including time_types.h
when necessary (Stefan)
* tag 'io_uring-6.2-2022-12-29' of git://git.kernel.dk/linux:
uapi:io_uring.h: allow linux/time_types.h to be skipped
io_uring: check for valid register opcode earlier
io_uring/cancel: re-grab ctx mutex after finishing wait
io_uring: finish waiting before flushing overflow entries
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit fix from Shuah Khan:
- alloc_string_stream_fragment() error path fix to free before
returning a failure.
* tag 'linux-kselftest-kunit-fixes-6.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: alloc_string_stream_fragment error handling bug fix
|
|
Pull kvm fixes from Paolo Bonzini:
"Changes that were posted too late for 6.1, or after the release.
x86:
- several fixes to nested VMX execution controls
- fixes and clarification to the documentation for Xen emulation
- do not unnecessarily release a pmu event with zero period
- MMU fixes
- fix Coverity warning in kvm_hv_flush_tlb()
selftests:
- fixes for the ucall mechanism in selftests
- other fixes mostly related to compilation with clang"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (41 commits)
KVM: selftests: restore special vmmcall code layout needed by the harness
Documentation: kvm: clarify SRCU locking order
KVM: x86: fix deadlock for KVM_XEN_EVTCHN_RESET
KVM: x86/xen: Documentation updates and clarifications
KVM: x86/xen: Add KVM_XEN_INVALID_GPA and KVM_XEN_INVALID_GFN to uapi
KVM: x86/xen: Simplify eventfd IOCTLs
KVM: x86/xen: Fix SRCU/RCU usage in readers of evtchn_ports
KVM: x86/xen: Use kvm_read_guest_virt() instead of open-coding it badly
KVM: x86/xen: Fix memory leak in kvm_xen_write_hypercall_page()
KVM: Delete extra block of "};" in the KVM API documentation
kvm: x86/mmu: Remove duplicated "be split" in spte.h
kvm: Remove the unused macro KVM_MMU_READ_{,UN}LOCK()
MAINTAINERS: adjust entry after renaming the vmx hyperv files
KVM: selftests: Mark correct page as mapped in virt_map()
KVM: arm64: selftests: Don't identity map the ucall MMIO hole
KVM: selftests: document the default implementation of vm_vaddr_populate_bitmap
KVM: selftests: Use magic value to signal ucall_alloc() failure
KVM: selftests: Disable "gnu-variable-sized-type-not-at-end" warning
KVM: selftests: Include lib.mk before consuming $(CC)
KVM: selftests: Explicitly disable builtins for mem*() overrides
...
|
|
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.2
- fix various problems in handling the Command Supported and Effects log
(Christoph Hellwig)
- don't allow unprivileged passthrough of commands that don't transfer
data but modify logical block content (Christoph Hellwig)
- add a features and quirks policy document (Christoph Hellwig)
- fix some really nasty code that was correct but made smatch complain
(Sagi Grimberg)"
* tag 'nvme-6.2-2022-12-29' of git://git.infradead.org/nvme:
nvme-auth: fix smatch warning complaints
nvme: consult the CSE log page for unprivileged passthrough
nvme: also return I/O command effects from nvme_command_effects
nvmet: don't defer passthrough commands with trivial effects to the workqueue
nvmet: set the LBCC bit for commands that modify data
nvmet: use NVME_CMD_EFFECTS_CSUPP instead of open coding it
nvme: fix the NVME_CMD_EFFECTS_CSE_MASK definition
docs, nvme: add a feature and quirk policy document
|
|
Add few static text to explain how one can bring up the search dialog
box by pressing the forward slash key anywhere on this interface.
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
When initializing auth context, there may be no secrets passed
by the user. Make return code explicit when returning successfully.
smatch warnings:
drivers/nvme/host/auth.c:950 nvme_auth_init_ctrl() warn: missing error code? 'ret'
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Commands like Write Zeros can change the contents of a namespaces without
actually transferring data. To protect against this, check the Commands
Supported and Effects log is supported by the controller for any
unprivileg command passthrough and refuse unprivileged passthrough if the
command has any effects that can change data or metadata.
Note: While the Commands Support and Effects log page has only been
mandatory since NVMe 2.0, it is widely supported because Windows requires
it for any command passthrough from userspace.
Fixes: e4fbcf32c860 ("nvme: identify-namespace without CAP_SYS_ADMIN")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
|
|
To be able to use the Commands Supported and Effects Log for allowing
unprivileged passtrough, it needs to be corretly reported for I/O
commands as well. Return the I/O command effects from
nvme_command_effects, and also add a default list of effects for the
NVM command set. For other command sets, the Commands Supported and
Effects log is required to be present already.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
|
|
Mask out the "Command Supported" and "Logical Block Content Change" bits
and only defer execution of commands that have non-trivial effects to
the workqueue for synchronous execution. This allows to execute admin
commands asynchronously on controllers that provide a Command Supported
and Effects log page, and will keep allowing to execute Write commands
asynchronously once command effects on I/O commands are taken into
account.
Fixes: c1fef73f793b ("nvmet: add passthru code to process commands")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
|
|
Write, Write Zeroes, Zone append and a Zone Reset through
Zone Management Send modify the logical block content of a namespace,
so make sure the LBCC bit is reported for them.
Fixes: b5d0b38c0475 ("nvmet: add Command Set Identifier support")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
|
|
Use NVME_CMD_EFFECTS_CSUPP instead of open coding it and assign a
single value to multiple array entries instead of repeated assignments.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
|
|
3 << 16 does not generate the correct mask for bits 16, 17 and 18.
Use the GENMASK macro to generate the correct mask instead.
Fixes: 84fef62d135b ("nvme: check admin passthru command effects")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
|
|
This adds a document about what specification features are supported by
the Linux NVMe driver, and what qualifies for a quirk if an implementation
has problems following the specification.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
|
