summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-05-19sparc32,leon: remove duplicate UART register definitionsSam Ravnborg
The registers are defined in leon_amba too. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Konrad Eisele <konrad@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19sparc32,leon: move leon ASI definitions to asi.hSam Ravnborg
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Konrad Eisele <konrad@gaisler.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19sparc32: move trap table to a separate fileSam Ravnborg
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19sparc64: renamed ttable.S to ttable_64.SSam Ravnborg
To allow us to add ttable_32.S Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19sparc32: Remove asm/sysen.h header.David S. Miller
Defines a sun4c register, thus completely unused. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19sparc32: Delete asm/smpprim.hDavid S. Miller
Completely unused. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19sparc32: Remove unused empty_bad_page{,_table} declarations.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19sparc32: Kill boot_cpu_id4David S. Miller
It is written, but never actually read. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19sparc32: Move GET_PROCESSOR*_ID() out of asm/asmmacro.hDavid S. Miller
GET_PROCESSOR4D_ID is completely unused, so delete it. Move GET_PROCESSOR4M_ID to the sun4m specific trap code which uses it. We now no longer need to include asm/asi.h Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19sparc32: Remove completely unused code from asm/cache.hDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19net: qmi_wwan: Add Vodafone/Huawei K5005 supportBjørn Mork
Tested-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19net: cdc_ether: Add ZTE WWAN matches before generic EthernetAndrew Bird (Sphere Systems)
Some ZTE WWAN devices have generic CDC Ether descriptors. Add those into the whitelist so that we get FLAG_WWAN on the interface Signed-off-by: Andrew Bird <ajb@spheresystems.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19ipv6: use skb coalescing in reassemblyEric Dumazet
ip6_frag_reasm() can use skb_try_coalesce() to build optimized skb, reducing memory used by them (truesize), and reducing number of cache line misses and overhead for the consumer. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19ipv4: use skb coalescing in defragmentationEric Dumazet
ip_frag_reasm() can use skb_try_coalesce() to build optimized skb, reducing memory used by them (truesize), and reducing number of cache line misses and overhead for the consumer. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19net: introduce skb_try_coalesce()Eric Dumazet
Move tcp_try_coalesce() protocol independent part to skb_try_coalesce(). skb_try_coalesce() can be used in IPv4 defrag and IPv6 reassembly, to build optimized skbs (less sk_buff, and possibly less 'headers') skb_try_coalesce() is zero copy, unless the copy can fit in destination header (its a rare case) kfree_skb_partial() is also moved to net/core/skbuff.c and exported, because IPv6 will need it in patch (ipv6: use skb coalescing in reassembly). Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19net:ipv6:fixed space issues relating to operators.Jeffrin Jose
Fixed space issues relating to operators found by checkpatch.pl tool in net/ipv6/udp.c Signed-off-by: Jeffrin Jose <ahiliation@yahoo.co.in> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19net:ipv6:fixed a trailing white space issue.Jeffrin Jose
Fixed a trailing white space issue found by checkpatch.pl tool in net/ipv6/udp.c Signed-off-by: Jeffrin Jose <ahiliation@yahoo.co.in> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19Merge tag 'parisc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6 Pull PA-RISC fixes from James Bottomley: "This is a set of three bug fixes that gets parisc running again on systems with PA1.1 processors. Two fix regressions introduced in 2.6.39 and one fixes a prefetch bug that only affects PA7300LC processors. We also have another pending fix to do with the sectional arrangement of vmlinux.lds, but there's a query on it during testing on one particular system type, so I'll hold off sending it in for now." * tag 'parisc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6: [PARISC] fix panic on prefetch(NULL) on PA7300LC [PARISC] fix crash in flush_icache_page_asm on PA1.1 [PARISC] fix PA1.1 oops on boot
2012-05-19Merge branch 'x86/ld-fix' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 linker bug workarounds from Peter Anvin. GNU ld-2.22.52.0.[12] (*) has an unfortunate bug where it incorrectly turns certain relocation entries absolute. Section-relative symbols that are part of otherwise empty sections are silently changed them to absolute. We rely on section-relative symbols staying section-relative, and actually have several sections in the linker script solely for this purpose. See for example http://sourceware.org/bugzilla/show_bug.cgi?id=14052 We could just black-list the buggy linker, but it appears that it got shipped in at least F17, and possibly other distros too, so it's sadly not some rare unusual case. This backports the workaround from the x86/trampoline branch, and as Peter says: "This is not a minimal fix, not at all, but it is a tested code base." * 'x86/ld-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, relocs: When printing an error, say relative or absolute x86, relocs: Workaround for binutils 2.22.52.0.1 section bug x86, realmode: 16-bit real-mode code support for relocs tool (*) That's a manly release numbering system. Stupid, sure. But manly.
2012-05-19sparc32: Add ucmpdi2.o to obj-y instead of lib-y.David S. Miller
Otherwise if no references exist in the static kernel image, we won't export the symbol properly to modules. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19sparc32: add ucmpdi2Sam Ravnborg
Based on copy from microblaze add ucmpdi2 implementation. This fixes build of niu driver which failed with: drivers/built-in.o: In function `niu_get_nfc': niu.c:(.text+0x91494): undefined reference to `__ucmpdi2' This driver will never be used on a sparc32 system, but patch added to fix build breakage with all*config builds. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19regulator: tps65910: use devm_* for memory allocationLaxman Dewangan
use the devm_* apis for memory allocation. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-19regulator: tps65910: use small letter for regulator namesLaxman Dewangan
Use the small-letter for names of different regulator to match the names with dt binding documents. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-19mfd: tpx6586x: Depend on regulatorMark Brown
Some of the OF binding stuff is done in the MFD. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-19Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block layer fixes from Jens Axboe: "A few small, but important fixes. Most of them are marked for stable as well - Fix failure to release a semaphore on error path in mtip32xx. - Fix crashable condition in bio_get_nr_vecs(). - Don't mark end-of-disk buffers as mapped, limit it to i_size. - Fix for build problem with CONFIG_BLOCK=n on arm at least. - Fix for a buffer overlow on UUID partition printing. - Trivial removal of unused variables in dac960." * 'for-linus' of git://git.kernel.dk/linux-block: block: fix buffer overflow when printing partition UUIDs Fix blkdev.h build errors when BLOCK=n bio allocation failure due to bio_get_nr_vecs() block: don't mark buffers beyond end of disk as mapped mtip32xx: release the semaphore on an error path dac960: Remove unused variables from DAC960_CreateProcEntries()
2012-05-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull one more networking bug-fix from David Miller: "One last straggler. Eric Dumazet's pktgen unload oops fix was not entirely complete, but all the cases should be handled properly now.... fingers crossed." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: pktgen: fix module unload for good
2012-05-19memcg,thp: fix res_counter:96 regressionHugh Dickins
Occasionally, testing memcg's move_charge_at_immigrate on rc7 shows a flurry of hundreds of warnings at kernel/res_counter.c:96, where res_counter_uncharge_locked() does WARN_ON(counter->usage < val). The first trace of each flurry implicates __mem_cgroup_cancel_charge() of mc.precharge, and an audit of mc.precharge handling points to mem_cgroup_move_charge_pte_range()'s THP handling in commit 12724850e806 ("memcg: avoid THP split in task migration"). Checking !mc.precharge is good everywhere else, when a single page is to be charged; but here the "mc.precharge -= HPAGE_PMD_NR" likely to follow, is liable to result in underflow (a lot can change since the precharge was estimated). Simply check against HPAGE_PMD_NR: there's probably a better alternative, trying precharge for more, splitting if unsuccessful; but this one-liner is safer for now - no kernel/res_counter.c:96 warnings seen in 26 hours. Signed-off-by: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-19regulator: regulator for Palmas KconfigGraeme Gregory
Add the Kconfig/Makefile stuff for the palmas regulator driver Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-19regulator: regulator driver for Palmas series chipsGraeme Gregory
Palmas has both Switched Mode (SMPS) and Linear (LDO) regulators in it. This regulator driver allows software control of these regulators. The regulators available on Palmas series chips vary depending on the muxing. This is handled automatically in the driver by reading the mux info from OTP. Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-19ipv6: disable GSO on sockets hitting dst_allfragEric Dumazet
If the allfrag feature has been set on a host route (due to an ICMPv6 Packet Too Big received indicating a MTU of less than 1280), we hit a very slow behavior in TCP stack, because all big packets are dropped and only a retransmit timer is able to push one MSS frame every 200 ms. One way to handle this is to disable GSO on the socket the first time a super packet is dropped. Adding a specific dst_allfrag() in the fast path is probably overkill since the dst_allfrag() case almost never happen. Result on netperf TCP_STREAM, one flow : Before : 60 kbit/sec After : 1.6 Gbit/sec Reported-by: Tore Anderson <tore@fud.no> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Tore Anderson <tore@fud.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19tg3: use netdev_alloc_frag() APIEric Dumazet
Update our reference driver to use netdev_alloc_frag() API instead of the temporary custom allocator I introduced in commit 8d4057a938 (tg3: provide frags as skb head) This removes the memory leak we had, since we could leak one page at device dismantle. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Matt Carlson <mcarlson@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19net: napi_frags_skb() is staticEric Dumazet
No need to export napi_frags_skb() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19ppp: avoid false drop_monitor false positivesEric Dumazet
Call consume_skb() in place of kfree_skb() were appropriate. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19ipv6: bool/const conversions phase2Eric Dumazet
Mostly bool conversions, some inline removals and const additions. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19ipx: Remove spurious NULL checking in ipx_ioctl().David S. Miller
We already unconditionally dereference 'sk' via lock_sock(sk) earlier in this function, and our caller (sock_do_ioctl()) makes takes similar liberties. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-18ipv6: ip6_fragment() should check CHECKSUM_PARTIALEric Dumazet
Quoting Tore Anderson from : If the allfrag feature has been set on a host route (due to an ICMPv6 Packet Too Big received indicating a MTU of less than 1280), TCP SYN/ACK packets to that destination appears to get an incorrect TCP checksum. This in turn means they are thrown away as invalid. In the case of an IPv4 client behind a link with a MTU of less than 1260, accessing an IPv6 server through a stateless translator, this means that the client can only download a single large file from the server, because once it is in the server's routing cache with the allfrag feature set, new TCP connections can no longer be established. </endquote> It appears ip6_fragment() doesn't handle CHECKSUM_PARTIAL properly. As network drivers are not prepared to fetch correct transport header, a safe fix is to call skb_checksum_help() before fragmenting packet. Reported-by: Tore Anderson <tore@fud.no> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Tore Anderson <tore@fud.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-18cirrus: cs89x0: Remove function prototypes and reorder declarationsJoe Perches
Move blocks of code around to avoid function prototypes. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-18cirrus: cs89x0: Neaten debugging and loggingJoe Perches
Introduce and use a debug macro to test and print. Convert printks to pr_<level>. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-18cirrus: cs89x0: Code neateningJoe Perches
Just some stylings. Use #include <linux... not #include <asm... Convert a test and print to a printk_once. Combine an "if (foo) { if (bar) {" to single "if (foo && bar) {" to save an indent level. Convert single line "if (foo) bar;" to multiple lines. Move some braces. Align some long lines a bit better. Long lines and printks with KERN_ checkpatch complaints still exist. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-18cirrus: cs89x0: Convert printks to pr_<level>Joe Perches
Use more current logging styles. Add pr_fmt. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-18cirrus: cs89x0: Code style neateningJoe Perches
Neaten the comments and reflow the code without changing anything other than whitespace. git diff -w shows just comment neatening and a few line removals. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-18x86, relocs: When printing an error, say relative or absoluteH. Peter Anvin
When the relocs tool throws an error, let the error message say if it is an absolute or relative symbol. This should make it a lot more clear what action the programmer needs to take and should help us find the reason if additional symbol bugs show up. Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: <stable@vger.kernel.org>
2012-05-18x86, relocs: Workaround for binutils 2.22.52.0.1 section bugH. Peter Anvin
GNU ld 2.22.52.0.1 has a bug that it blindly changes symbols from section-relative to absolute if they are in a section of zero length. This turns the symbols __init_begin and __init_end into absolute symbols. Let the relocs program know that those should be treated as relative symbols. Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: H.J. Lu <hjl.tools@gmail.com> Cc: <stable@vger.kernel.org> Cc: Jarkko Sakkinen <jarkko.sakkinen@intel.com>
2012-05-18x86, realmode: 16-bit real-mode code support for relocs toolH. Peter Anvin
A new option is added to the relocs tool called '--realmode'. This option causes the generation of 16-bit segment relocations and 32-bit linear relocations for the real-mode code. When the real-mode code is moved to the low-memory during kernel initialization, these relocation entries can be used to relocate the code properly. In the assembly code 16-bit segment relocations must be relative to the 'real_mode_seg' absolute symbol. Linear relocations must be relative to a symbol prefixed with 'pa_'. 16-bit segment relocation is used to load cs:ip in 16-bit code. Linear relocations are used in the 32-bit code for relocatable data references. They are declared in the linker script of the real-mode code. The relocs tool is moved to arch/x86/tools/relocs.c, and added new target archscripts that can be used to build scripts needed building an architecture. be compiled before building the arch/x86 tree. [ hpa: accelerating this because it detects invalid absolute relocations, a serious bug in binutils 2.22.52.0.x which currently produces bad kernels. ] Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/1336501366-28617-2-git-send-email-jarkko.sakkinen@intel.com Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: <stable@vger.kernel.org>
2012-05-18Merge tag 'dm-3.4-fixes-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm Pull a dm fix from Alasdair G Kergon: "A fix to the thin provisioning userspace interface." * tag 'dm-3.4-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: dm thin: fix table output when pool target disables discard passdown internally
2012-05-18IB/mlx4: Fix mlx4_ib_add() error flowJack Morgenstein
We need to use a different loop index for mlx4_counter_alloc() and for device_create_file() iterations: the mlx4_counter_alloc() loop index is used in the error flow to free counters. If the same loop index is used for device_create_file() and, say, the device_create_file() loop fails on the first iteration, the allocated counters will not be freed. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-18IB/core: Fix IB_SA_COMP_MASK macroJack Morgenstein
It needs parentheses around the argument, so that it can be used with complex arguments (e.g., "n+5"). Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-18IB/iser: Fix error flow in iser ep connection establishmentOr Gerlitz
The current error flow code was releasing the IB connection object and calling iscsi_destroy_endpoint() directly without going through the reference counting mechanism introduced in commit 39ff05d ("IB/iser: Enhance disconnection logic for multi-pathing"). This resulted in a double free of the iscsi endpoint object, which causes a kernel NULL pointer dereference. Fix that by plugging into the IB conn reference counting correctly. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-18IB/mlx4: Increase the number of vectors (EQs) available for ULPsShlomo Pongratz
Enable IB ULPs to use a larger portion of the device EQs (which map to IRQs). The mlx4_ib driver follows the mlx4_core framework of the EQs to be divided among the device ports. In this scheme, for each IB port, the number of allocated EQs follows the number of cores, subject to other system constraints, such as number available MSI-X vectors. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-05-19dm thin: fix table output when pool target disables discard passdown internallyMike Snitzer
When the thin pool target clears the discard_passdown parameter internally, it incorrectly changes the table line reported to userspace. This breaks dumb string comparisons on these table lines in generic userspace device-mapper library code and leads to tables being reloaded repeatedly when nothing is actually meant to be changing. This patch corrects this by no longer changing the table line when discard passdown was disabled. We can still tell when discard passdown is overridden by looking for the message "Discard unsupported by data device (sdX): Disabling discard passdown." This automatic detection is also moved from the 'load' to the 'resume' so that it is re-evaluated should the properties of underlying devices change. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-31 00:55:05 +0000