summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-09-07wifi: libertas: fix a couple of sparse warningsJohannes Berg
- endian swapping is required in one place, use the already swapped 'bsssize' local - lbs_disablemesh need not be exported and can be static Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220904212910.76c34b2ae7a0.Ieb97c72b6d26f9d695cc4ab10fa7af5c3509612b@changeid
2022-09-07wifi: ipw2100: fix warnings about non-kernel-docJohannes Berg
Just remove the extra asterisk to make it not be kernel-doc formatted. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220904212910.8169e8c9090c.I0357e80cc86be2d4ac6205d1f53568444dcf7c9b@changeid
2022-09-07wifi: rtl8xxxu: Fix skb misuse in TX queue selectionBitterblue Smith
rtl8xxxu_queue_select() selects the wrong TX queues because it's reading memory from the wrong address. It expects to find ieee80211_hdr at skb->data, but that's not the case after skb_push(). Move the call to rtl8xxxu_queue_select() before the call to skb_push(). Fixes: 26f1fad29ad9 ("New driver: rtl8xxxu (mac80211)") Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/7fa4819a-4f20-b2af-b7a6-8ee01ac49295@gmail.com
2022-09-07wifi: brcmfmac: remove redundant variable errJinpeng Cui
Return value from brcmf_fil_iovar_data_set() and brcmf_config_ap_mgmt_ie() directly instead of taking this in another redundant variable. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Jinpeng Cui <cui.jinpeng2@zte.com.cn> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220831132254.303697-1-cui.jinpeng2@zte.com.cn
2022-09-07wifi: brcmfmac: add 43439 SDIO ids and initializationMarek Vasut
Add HW and SDIO ids for use with the muRata 1YN (Cypress CYW43439). Add the firmware mapping structures for the CYW43439 chipset. The 43439 needs some things setup similar to the 43430 chipset. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220827024903.617294-1-marex@denx.de
2022-09-07wifi: rtl8xxxu: Simplify the error handling codeZheyu Ma
Since the logic of the driver's error handling code has changed, the previous dead store and checks are not needed. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220818073352.3156288-1-zheyuma97@gmail.com
2022-09-07bcma: Fix typo in commentsShaomin Deng
Remove the repeated word "registers" in comments. Signed-off-by: Shaomin Deng <dengshaomin@cdjrlc.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220811152043.11446-1-dengshaomin@cdjrlc.com
2022-09-07wifi: p54: Fix comment typoJason Wang
The double `to' is duplicated in the comment, remove one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Acked-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220811120340.12968-1-wangborong@cdjrlc.com
2022-09-07wifi: mwifiex: Fix comment typoJason Wang
The double `the' is duplicated in the comment, remove one. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220811120201.10824-1-wangborong@cdjrlc.com
2022-09-07wifi: brcmfmac: Add DMI nvram filename quirk for Chuwi Hi8 Pro tabletHans de Goede
The Chuwi Hi8 Pro tablet contains quite generic names in the sys_vendor and product_name DMI strings, without this patch brcmfmac will try to load: "brcmfmac43430a0-sdio.Default string-Default string.txt" as nvram file which is way too generic. The Chuwi Hi8 Pro uses the same Ampak AP6212 module as the Chuwi Vi8 Plus and the nvram for the Vi8 Plus is already in linux-firmware, so point the new DMI nvram filename quirk to the Vi8 Plus nvram file. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220810142333.141044-1-hdegoede@redhat.com
2022-09-07wifi: brcmfmac: Use ISO3166 country code and rev 0 as fallback on 43430Hans de Goede
Many devices ship with a nvram ccode value of X2/XT/XU/XV/ALL which are all special world-wide compatibility ccode-s. Most of these world-wide ccode-s allow passive scan mode only for 2.4GHz channels 12-14, only enabling them when an AP is seen on them. Since linux-firmware has moved to the new cyfmac43430-sdio.bin + cyfmac43430-sdio.clm_blob firmware files this no longer works and 43430 devices using e.g. an X2 ccode fail to connect to an AP on channel 13. Add the 43430 chip-id to the list of chips for which to use the ISO3166 country code + rev 0 as fallback in brcmf_translate_country_code() to fix this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220810142328.141030-1-hdegoede@redhat.com
2022-09-07wifi: brcmfmac: fix use-after-free bug in brcmf_netdev_start_xmit()Alexander Coffin
> ret = brcmf_proto_tx_queue_data(drvr, ifp->ifidx, skb); may be schedule, and then complete before the line > ndev->stats.tx_bytes += skb->len; [ 46.912801] ================================================================== [ 46.920552] BUG: KASAN: use-after-free in brcmf_netdev_start_xmit+0x718/0x8c8 [brcmfmac] [ 46.928673] Read of size 4 at addr ffffff803f5882e8 by task systemd-resolve/328 [ 46.935991] [ 46.937514] CPU: 1 PID: 328 Comm: systemd-resolve Tainted: G O 5.4.199-[REDACTED] #1 [ 46.947255] Hardware name: [REDACTED] [ 46.954568] Call trace: [ 46.957037] dump_backtrace+0x0/0x2b8 [ 46.960719] show_stack+0x24/0x30 [ 46.964052] dump_stack+0x128/0x194 [ 46.967557] print_address_description.isra.0+0x64/0x380 [ 46.972877] __kasan_report+0x1d4/0x240 [ 46.976723] kasan_report+0xc/0x18 [ 46.980138] __asan_report_load4_noabort+0x18/0x20 [ 46.985027] brcmf_netdev_start_xmit+0x718/0x8c8 [brcmfmac] [ 46.990613] dev_hard_start_xmit+0x1bc/0xda0 [ 46.994894] sch_direct_xmit+0x198/0xd08 [ 46.998827] __qdisc_run+0x37c/0x1dc0 [ 47.002500] __dev_queue_xmit+0x1528/0x21f8 [ 47.006692] dev_queue_xmit+0x24/0x30 [ 47.010366] neigh_resolve_output+0x37c/0x678 [ 47.014734] ip_finish_output2+0x598/0x2458 [ 47.018927] __ip_finish_output+0x300/0x730 [ 47.023118] ip_output+0x2e0/0x430 [ 47.026530] ip_local_out+0x90/0x140 [ 47.030117] igmpv3_sendpack+0x14c/0x228 [ 47.034049] igmpv3_send_cr+0x384/0x6b8 [ 47.037895] igmp_ifc_timer_expire+0x4c/0x118 [ 47.042262] call_timer_fn+0x1cc/0xbe8 [ 47.046021] __run_timers+0x4d8/0xb28 [ 47.049693] run_timer_softirq+0x24/0x40 [ 47.053626] __do_softirq+0x2c0/0x117c [ 47.057387] irq_exit+0x2dc/0x388 [ 47.060715] __handle_domain_irq+0xb4/0x158 [ 47.064908] gic_handle_irq+0x58/0xb0 [ 47.068581] el0_irq_naked+0x50/0x5c [ 47.072162] [ 47.073665] Allocated by task 328: [ 47.077083] save_stack+0x24/0xb0 [ 47.080410] __kasan_kmalloc.isra.0+0xc0/0xe0 [ 47.084776] kasan_slab_alloc+0x14/0x20 [ 47.088622] kmem_cache_alloc+0x15c/0x468 [ 47.092643] __alloc_skb+0xa4/0x498 [ 47.096142] igmpv3_newpack+0x158/0xd78 [ 47.099987] add_grhead+0x210/0x288 [ 47.103485] add_grec+0x6b0/0xb70 [ 47.106811] igmpv3_send_cr+0x2e0/0x6b8 [ 47.110657] igmp_ifc_timer_expire+0x4c/0x118 [ 47.115027] call_timer_fn+0x1cc/0xbe8 [ 47.118785] __run_timers+0x4d8/0xb28 [ 47.122457] run_timer_softirq+0x24/0x40 [ 47.126389] __do_softirq+0x2c0/0x117c [ 47.130142] [ 47.131643] Freed by task 180: [ 47.134712] save_stack+0x24/0xb0 [ 47.138041] __kasan_slab_free+0x108/0x180 [ 47.142146] kasan_slab_free+0x10/0x18 [ 47.145904] slab_free_freelist_hook+0xa4/0x1b0 [ 47.150444] kmem_cache_free+0x8c/0x528 [ 47.154292] kfree_skbmem+0x94/0x108 [ 47.157880] consume_skb+0x10c/0x5a8 [ 47.161466] __dev_kfree_skb_any+0x88/0xa0 [ 47.165598] brcmu_pkt_buf_free_skb+0x44/0x68 [brcmutil] [ 47.171023] brcmf_txfinalize+0xec/0x190 [brcmfmac] [ 47.176016] brcmf_proto_bcdc_txcomplete+0x1c0/0x210 [brcmfmac] [ 47.182056] brcmf_sdio_sendfromq+0x8dc/0x1e80 [brcmfmac] [ 47.187568] brcmf_sdio_dpc+0xb48/0x2108 [brcmfmac] [ 47.192529] brcmf_sdio_dataworker+0xc8/0x238 [brcmfmac] [ 47.197859] process_one_work+0x7fc/0x1a80 [ 47.201965] worker_thread+0x31c/0xc40 [ 47.205726] kthread+0x2d8/0x370 [ 47.208967] ret_from_fork+0x10/0x18 [ 47.212546] [ 47.214051] The buggy address belongs to the object at ffffff803f588280 [ 47.214051] which belongs to the cache skbuff_head_cache of size 208 [ 47.227086] The buggy address is located 104 bytes inside of [ 47.227086] 208-byte region [ffffff803f588280, ffffff803f588350) [ 47.238814] The buggy address belongs to the page: [ 47.243618] page:ffffffff00dd6200 refcount:1 mapcount:0 mapping:ffffff804b6bf800 index:0xffffff803f589900 compound_mapcount: 0 [ 47.255007] flags: 0x10200(slab|head) [ 47.258689] raw: 0000000000010200 ffffffff00dfa980 0000000200000002 ffffff804b6bf800 [ 47.266439] raw: ffffff803f589900 0000000080190018 00000001ffffffff 0000000000000000 [ 47.274180] page dumped because: kasan: bad access detected [ 47.279752] [ 47.281251] Memory state around the buggy address: [ 47.286051] ffffff803f588180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 47.293277] ffffff803f588200: fb fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 47.300502] >ffffff803f588280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 47.307723] ^ [ 47.314343] ffffff803f588300: fb fb fb fb fb fb fb fb fb fb fc fc fc fc fc fc [ 47.321569] ffffff803f588380: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb [ 47.328789] ================================================================== Signed-off-by: Alexander Coffin <alex.coffin@matician.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220808174925.3922558-1-alex.coffin@matician.com
2022-09-07wifi: iwlwifi: calib: Refactor iwl_calib_result usage for clarityKees Cook
In preparation for FORTIFY_SOURCE performing run-time destination buffer bounds checking for memcpy(), refactor the use of struct iwl_calib_result: - Have struct iwl_calib_result contain struct iwl_calib_cmd since functions expect to operate on the "data" flex array in "cmd", which follows the "hdr" member. - Switch argument passing around to use struct iwl_calib_cmd instead of struct iwl_calib_hdr to prepare functions to see the "data" member. - Change iwl_calib_set()'s "len" argument to a size_t since it is always unsigned and is normally receiving the output of sizeof(). - Add an explicit length sanity check in iwl_calib_set(). - Adjust the memcpy() to avoid copying across the now visible composite flex array structure. This avoids the future run-time warning: memcpy: detected field-spanning write (size 8) of single field "&res->hdr" (size 4) Cc: Luca Coelho <luciano.coelho@intel.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Johannes Berg <johannes.berg@intel.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Reported-by: Andy Lavr <andy.lavr@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220901204558.2256458-1-keescook@chromium.org
2022-09-06wifi: rsi: fix kernel-doc warningJohannes Berg
One of my previous patches here changed the function prototype, but since it was (half?) automated, I didn't update the docs. Fix that now. Fixes: b3e2130bf5f6 ("wifi: mac80211: change QoS settings API to take link into account") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-06wifi: mac80211_hwsim: always activate all linksJohannes Berg
By default, even in client mode, hwsim always had all links active, where it then uses them in a round-robin fashion. Re-enable that by activating all valid links work right after the connection is authorized. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-06wifi: mac80211: implement link switchingJohannes Berg
Implement an API function and debugfs file to switch active links. Also provide an async version of the API so drivers can call it in arbitrary contexts, e.g. while in the authorized callback. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-06wifi: mac80211: keep A-MSDU data in sta and per-linkBenjamin Berg
The A-MSDU data needs to be stored per-link and aggregated into a single value for the station. Add a new struct ieee_80211_sta_aggregates in order to store this data and a new function ieee80211_sta_recalc_aggregates to update the current data for the STA. Note that in the non MLO case the pointer in ieee80211_sta will directly reference the data in deflink.agg, which means that recalculation may be skipped in that case. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-06wifi: mac80211: set up beacon timing config on linksJohannes Berg
On secondary MLO links, I forgot to set the beacon interval and DTIM period, fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-06wifi: mac80211: add vif/sta link RCU dereference macrosJohannes Berg
Add macros (and an exported function) to allow checking some link RCU protected accesses that are happening in callbacks from mac80211 and are thus under the correct lock. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-06wifi: mac80211_hwsim: send NDP for link (de)activationJohannes Berg
In hwsim we now track when we receive NDP (or other frames carrying a PM bit) to see if a link should be active, but then of course we also need to transmit NDPs to at least set a link to inactive when we deacivate it. Implement that as well as sending an NDP when we activate a link, which allows receiving frames before transmitting any. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-06wifi: mac80211: extend ieee80211_nullfunc_get() for MLOJohannes Berg
Add a link_id parameter to ieee80211_nullfunc_get() to be able to obtain a correctly addressed frame. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-06wifi: mac80211_hwsim: track active STA linksJohannes Berg
Track the powersave bit on frames where we can look up the STA by link addresses and set the links active or inactive accordingly, and use this information to TX only on links that are actually active in the peer. Note that this doesn't implement powersave fully so if no link is active things will not work right. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-06wifi: mac80211_hwsim: skip inactive links on TXJohannes Berg
With the link activation handling in mac80211, skip any inactive links on TX. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-06wifi: mac80211: add ieee80211_find_sta_by_link_addrs APIJohannes Berg
Add a new API function ieee80211_find_sta_by_link_addrs() that looks up the STA and link ID based on interface and station link addresses. We're going to use it for mac80211-hwsim to track on the AP side which links are active. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-06wifi: mac80211: isolate driver from inactive linksJohannes Berg
In order to let the driver select active links and properly make multi-link connections, as a first step isolate the driver from inactive links, and set the active links to be only the association link for client-side interfaces. For AP side nothing changes since APs always have to have all their links active. To simplify things, update the for_each_sta_active_link() API to include the appropriate vif pointer. This also implies not allocating a chanctx for an inactive link, which requires a few more changes. Since we now no longer try to program multiple links to the driver, remove the check in the MLME code. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-06wifi: mac80211: make smps_mode per-linkBenjamin Berg
The SMPS power save mode needs to be per-link rather than being shared for all links. As such, move it into struct ieee80211_link_sta. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-06wifi: mac80211: use correct rx link_sta instead of defaultBenjamin Berg
Use rx->link_sta everywhere instead of accessing the default link. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-06wifi: mac80211: set link_sta in reorder timeoutJohannes Berg
Now that we have a link_sta pointer in the rx struct we also need to fill it in all the cases. It didn't matter so much until now as we weren't using it, but the code should really be able to assume that if the rx.sta is set, so is rx.link_sta. Fixes: ccdde7c74ffd ("wifi: mac80211: properly implement MLO key handling") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-06Merge remote-tracking branch 'wireless/main' into wireless-nextJohannes Berg
Merge wireless/main to get the rx.link fix, which is needed for further work in this area. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-04Merge tag 'wireless-next-2022-09-03' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== drivers - rtw89: large update across the map, e.g. coex, pci(e), etc. - ath9k: uninit memory read fix - ath10k: small peer map fix and a WCN3990 device fix - wfx: underflow stack - the "change MAC address while IFF_UP" change from James we discussed - more MLO work, including a set of fixes for the previous code, now that we have more code we can exercise it more - prevent some features with MLO that aren't ready yet (AP_VLAN and 4-address connections) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-03wifi: mac80211_hwsim: fix multi-channel handling in netlink RXJohannes Berg
In netlink RX, now that we can actually have multiple channel contexts for MLO, things don't work well as we only keep a single pointer, and then on link switching we might NULL it, and hit the return if the channel is NULL. However, we already use mac80211_hwsim_tx_iter() which deals with all this, so remove the test and adjust the remaining code a bit. This then means we no longer use the chanctx pointer, so remove it as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: call drv_sta_state() under sdata_lock() in reconfigJohannes Berg
Currently, other paths calling drv_sta_state() hold the mutex and therefore drivers can assume that, and look at links with that protection. Fix that for the reconfig path as well; to do it more easily use ieee80211_reconfig_stations() for the AP/AP_VLAN station reconfig as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: nl80211: add MLD address to assoc BSS entriesJohannes Berg
Add an MLD address attribute to BSS entries that the interface is currently associated with to help userspace figure out what's going on. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: mlme: refactor QoS settings codeJohannes Berg
Refactor the code to apply QoS settings to the driver so we can call it on link switch. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211_hwsim: warn on invalid link addressJohannes Berg
Catch the bugs fixed in mac80211 by the previous commits and warn if an invalid address is added (or removed). Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: fix double SW scan stopJohannes Berg
When we stop a not-yet-started scan, we erroneously call into the driver, causing a sequence of sw_scan_start() followed by sw_scan_complete() twice. This will cause a warning in hwsim with next in line commit that validates the address passed to wmediumd/virtio. Fix this by doing the calls only if we were actually scanning. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: mlme: assign link address correctlyJohannes Berg
Right now, we assign the link address only after we add the link to the driver, which is quite obviously wrong. It happens to work in many cases because it gets updated immediately, and then link_conf updates may update it, but it's clearly not really right. Set the link address during ieee80211_mgd_setup_link() so it's set before telling the driver about the link. Fixes: 81151ce462e5 ("wifi: mac80211: support MLO authentication/association with one link") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: move link code to a new fileJohannes Berg
We probably should've done that originally, we already have about 300 lines of code there, and will add more. Move all the link code we wrote to a new file. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211_hwsim: refactor RX a bitJohannes Berg
Refactor some common RX functionality between the netlink and non-netlink paths, adding the special hwsim TLV (if compiled) also in the netlink path. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211_hwsim: check STA magic in change_sta_linksJohannes Berg
Just as an additional check that mac80211 isn't doing anything strange, add a check of the STA magic (which gets assigned when the station is added, and cleared when the station is removed). Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: remove unused arg to ieee80211_chandef_eht_operJohannes Berg
We don't need the sdata argument, and it doesn't make any sense for a direct conversion from one value to another, so just remove the argument Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211_hwsim: remove multicast workaroundJohannes Berg
Now that we have proper multicast TX in mac80211, there's no longer a need to fake something here. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: nl80211: remove redundant err variableJinpeng Cui
Return value from rdev_set_mcast_rate() directly instead of taking this in another redundant variable. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Jinpeng Cui <cui.jinpeng2@zte.com.cn> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: Support POWERED_ADDR_CHANGE featureJames Prestwood
Adds support in mac80211 for NL80211_EXT_FEATURE_POWERED_ADDR_CHANGE. The motivation behind this functionality is to fix limitations of address randomization on frequencies which are disallowed in world roaming. The way things work now, if a client wants to randomize their address per-connection it must power down the device, change the MAC, and power back up. Here lies a problem since powering down the device may result in frequencies being disabled (until the regdom is set). If the desired BSS is on one such frequency the client is unable to connect once the phy is powered again. For mac80211 based devices changing the MAC while powered is possible but currently disallowed (-EBUSY). This patch adds some logic to allow a MAC change while powered by removing the interface, changing the MAC, and adding it again. mac80211 will advertise support for this feature so userspace can determine the best course of action e.g. disallow address randomization on certain frequencies if not supported. There are certain limitations put on this which simplify the logic: - No active connection - No offchannel work, including scanning. Signed-off-by: James Prestwood <prestwoj@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: nl80211: Add POWERED_ADDR_CHANGE featureJames Prestwood
Add a new extended feature bit signifying that the wireless hardware supports changing the MAC address while the underlying net_device is powered. Note that this has a different meaning from IFF_LIVE_ADDR_CHANGE as additional restrictions might be imposed by the hardware, such as: - No connection is active on this interface, carrier is off - No scan is in progress - No offchannel operations are in progress Signed-off-by: James Prestwood <prestwoj@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: prevent 4-addr use on MLDsJohannes Berg
We haven't tried this yet, and it's not very likely to work well right now, so for now disable 4-addr use on interfaces that are MLDs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20220902161143.f2e4cc2efaa1.I5924e8fb44a2d098b676f5711b36bbc1b1bd68e2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: prevent VLANs on MLDsJohannes Berg
Do not allow VLANs to be added to AP interfaces that are MLDs, this isn't going to work because the link structs aren't propagated to the VLAN interfaces yet. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20220902161144.8c88531146e9.If2ef9a3b138d4f16ed2fda91c852da156bdf5e4d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: use struct_group to copy addressesJohannes Berg
We sometimes copy all the addresses from the 802.11 header for the AAD, which may cause complaints from fortify checks. Use struct_group() to avoid the compiler warnings/errors. Change-Id: Ic3ea389105e7813b22095b295079eecdabde5045 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211_hwsim: check length for virtio packetsSoenke Huster
An invalid packet with a length shorter than the specified length in the netlink header can lead to use-after-frees and slab-out-of-bounds in the processing of the netlink attributes, such as the following: BUG: KASAN: slab-out-of-bounds in __nla_validate_parse+0x1258/0x2010 Read of size 2 at addr ffff88800ac7952c by task kworker/0:1/12 Workqueue: events hwsim_virtio_rx_work Call Trace: <TASK> dump_stack_lvl+0x45/0x5d print_report.cold+0x5e/0x5e5 kasan_report+0xb1/0x1c0 __nla_validate_parse+0x1258/0x2010 __nla_parse+0x22/0x30 hwsim_virtio_handle_cmd.isra.0+0x13f/0x2d0 hwsim_virtio_rx_work+0x1b2/0x370 process_one_work+0x8df/0x1530 worker_thread+0x575/0x11a0 kthread+0x29d/0x340 ret_from_fork+0x22/0x30 </TASK> Discarding packets with an invalid length solves this. Therefore, skb->len must be set at reception. Change-Id: Ieaeb9a4c62d3beede274881a7c2722c6c6f477b6 Signed-off-by: Soenke Huster <soenke.huster@eknoes.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: fix locking in auth/assoc timeoutJohannes Berg
If we hit an authentication or association timeout, we only release the chanctx for the deflink, and the other link(s) are released later by ieee80211_vif_set_links(), but we're not locking this correctly. Fix the locking here while releasing the channels and links. Change-Id: I9e08c1a5434592bdc75253c1abfa6c788f9f39b1 Fixes: 81151ce462e5 ("wifi: mac80211: support MLO authentication/association with one link") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-30 06:15:16 +0000