summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-07-23tty: add missing rcu_read_lock for task_pgrpPatrick Donnelly
task_pgrp requires an rcu or tasklist lock to be obtained if the returned pid is to be dereferenced, which kill_pgrp does. Obtain an RCU lock for the duration of use. Signed-off-by: Patrick Donnelly <batrick@batbytes.com> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23serial: 8250: Do XR17V35X specific wakeup in serial8250_do_startupJoerg Roedel
The XR17V35X UART needs the ECB bit set in its XR_EFR register to enable access to IER [7:5], ISR [5:4], FCR[5:4], MCR[7:5], and MSR [7:0]. Also reset the IER register to mask interrupts after access to all bits of this register has been enabled. This makes my 8-port XR17V35X working with the in-kernel serial driver. Cc: Joe Schultz <jschultz@xes-inc.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Reviewed-by: Michael Welling <mwelling@ieee.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23serial: 8250: Defer interrupt enable until fifos enabledPeter Hurley
An already-active sender can swamp the interrupt handler with "too much work" if the rx interrupts are enabled when the fifo is disabled and operating in single-byte mode. Defer rx and line status interrupt enable until after the fifos are enabled in set_termios(), but at least initialize the shadow IER value with the interrupts which will be enabled. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23tty: linux/gsmmux.h needs linux/types.hJiri Slaby
We use __u8 in linux/gsmmux.h, so include linux/types.h to have that defined. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23tty/early: make serial8250_early_{in,out} static againVineet Gupta
Commit ed71871bed719 ("tty/8250_early: Turn serial_in/serial_out into weak symbols") made these routines weak to allow platform specific Big endian override However recent updates to core, specifically ebc5e20082 ("serial: of_serial: Support big-endian register accesses") and 6e63be3fee14 ("serial: earlycon: Add support for big-endian MMIO accesses") means that round about way to overide the early serial accessors is no longer needed. Cc: Jiri Slaby <jslaby@suse.cz> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Rob Herring <robh@kernel.org> Cc: Kevin Cernekee <cernekee@gmail.com> Acked-by: Noam Camus <noamc@ezchip.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23serial: 8250: Split base port operations from universal driverPeter Hurley
Refactor base port operations into new file; 8250_port.c. Legacy irq handling, RSA port support, port storage for universal driver, driver definition, module parameters and linkage remain in 8250_core.c The source file split and resulting modules is diagrammed below: 8250_core.c ====> 8250_core.c __ \ \ \ +-- 8250.ko (alias 8250_core) \ 8250_pnp.c __/ (universal driver) \ => 8250_port.c __ \ +-- 8250_base.ko 8250_dma.c __/ (port operations) Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23Revert "serial: imx: initialized DMA w/o HW flow enabled"David Jander
This reverts commit 068500e08dc87ea9a453cc4a500cf3ab28d0f936. According to some tests, SDMA support is broken at least for i.MX6 without HW flow control. Different forms of data-corruption appear either with the ROM firmware for the SDMA controller as well as when loading Freescale provided SDMA firmware versions 1.1 or 3.1. Signed-off-by: David Jander <david@protonic.nl> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23tty: serial: imx.c: Reset UART before activating interruptsDavid Jander
If the UART has been in use before this driver was loaded, IRQs might be active and get fired as soon as we set the handler, which will crash in the spin_lock_irqsave(&sport->port.lock, flags) because port.lock is not initialized until the port is added at the end of probe. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23serial: imx: reduce irq-latency after rx overflowManfred Schlaegl
To prevent problems with interrupt latency, and due to the fact, that the error will be counted anyway (icount.overrun), the dev_err is simply removed. Background: If an rx-fifo overflow occurs a dev_err message was called in interrupt context. Since dev_err messages are written to console in a synchronous way (unbuffered), and console may be a serial terminal, this leads to a highly increased interrupt-latency (several milliseconds). As a result of the high latency more rx-fifo overflows will happen, and therefore a feedback loop of errors is created. Signed-off-by: Manfred Schlaegl <manfred.schlaegl@gmx.at> Acked-By: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23serial: imx: count tty buffer overrunsManfred Schlaegl
As can be seen in function uart_insert_char (serial_core) the element buf_overrun of struct uart_icount is used to count overruns of tty-buffer. Added support for counting of overruns in imx driver analogue to serial_core. Signed-off-by: Manfred Schlaegl <manfred.schlaegl@gmx.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23serial: imx: Disable irqs before requesting themFabio Estevam
Disable interrupts before requesting them in order to fix a kernel oops after lauching a kernel via kexec. Tested on a imx6sl-evk board. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23serial/uartlite: Let it build on any arch with IOMEMRicardo Ribalda Delgado
Being a soft core, it can be located not only on PPC or Microblaze platforms. Since the driver already does endianness detection we only need to change the Kconfig to use it in other arches. This is also done in other softcores as xilinx-spi. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23serial: stm32-usart: Fix SysRq supportMaxime Coquelin
SysRq support activation depends on CONFIG_SERIAL_STM32_USART_CONSOLE, but this config flag does not exists. This patch fix this by depending on the valid config flag, which is SERIAL_STM32_CONSOLE. Reported-by: Andreas Ruprecht <andreas.ruprecht@fau.de> Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23sc16is7xx: fix FIFO address of secondary UARTBo Svangård
Calls to regmap_raw_read/write needed register rewrite in a similar way as function calls to regmap_read/write already had. This enables reading/writing the serial datastream to the device. Signed-off-by: Bo Svangård <bo.svangard@embeddedart.se> Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Jon Ringle <jringle@gridpoint.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23sc16is7xx: fix Kconfig dependenciesJakub Kicinski
When I2C=m and SPI=y or-ing them will produce =y while what we need is the lower bound, i.e. =m. Fortunately SPI is a boolean so we need to handle only one special case. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23serial: sirf: let uart's receive start in right placeQipan Li
While UART work in DMA mode, function start_rx will request descriptor from DMA engine, if there is no left descriptor UART, driver will give err logs "DMA slave single fail". currently start_rx is called in set_termios function, so everytime, port setting will call start_rx once. Now put start_rx in startup, it will be called once while open the port. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23serial: sirf: workaround rx process to avoid possible data lossQipan Li
when UART works in DMA mode and left bytes in rx fifo less than a dma transfer unit, DMA engine can't transfer the bytes out to rx DMA buffer. so it need a way to fetch them out and flush them into tty buffer in time. in the above case, we want UART switch from DMA mode to PIO mode and fetch && flush bytes into tty layer buffer until rxfifo become empty, after that done let UART switch from PIO mode back to DMA mode. (record as method1) method1 result in the next receive result wrong. for example in PIO part of method1, we fetched && pushed X1...X3 bytes, when UART rxfifo newly received Y1...Y4 bytes, UART trigger a DMA unit transfer, the DMA unit's content is X1...X3Y1 and rxfifo fifo status is empty, so X1X2X3 pushed twice by PIO way and DMA way also the bytes Y2Y3Y4 missed. add rxfifo reset operation before UART switch back to DMA mode would resolve the issue. ([method1 + do fifo reset] record as method2) before the commit, UART driver use method2. but methd2 have a risk of data loss, as if UART's shift register receive a complete byte and transfer it into rxfifo before rxfifo reset operation the byte will loss. UART and USP have the similar bits CLEAR_RX_ADDR_EN(uart)/FRADDR_CLR_EN(usp), When found UART controller changing I/O to DMA mode, UART controller clears the two low bits of read point (rx_fifo_addr[1:0]). when enable the bit + method1(record as method3), in above example the DMA unit's content is X1...X3Y1 and there are Y2Y3Y4 in rxfifo by experiment, we just push bytes in rx DMA buffer. BTW, the workaround works only for UART receive DMA channel use SINGLE DMA mode. Signed-off-by: Qipan Li <Qipan.Li@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23serial: etraxfs-uart: Fix release etraxfs_uart_portsAxel Lin
In probe, we use dev_id as array index of etraxfs_uart_ports and store the index in port->line. So etraxfs_uart_ports[port->line] should be released when unload the module. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Niklas Cassel <nks@flawful.org> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23serial: etraxfs-uart: Convert to uart_console_device instead of open-codedAxel Lin
The implementation of cris_console_device() is exactly the same as uart_console_device(), so let's switch to use uart_console_device(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Niklas Cassel <nks@flawful.org> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23serial: 8250_omap: Remove auto-IXON flow controlPeter Hurley
OMAP h/w-assisted IXON flow control is borked. The transmitter becomes stuck if XON is never received; clearing the fifos or resetting the rx flow control bits has no effect. Remove auto-IXANY as well, since without auto-IXON, it has no purpose. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23serial: 8250_omap: workaround module disable errata on dra7x SoCsSekhar Nori
Due to Advisory 21 as documented in AM437x errata document, UART module cannot be disabled once DMA is used. The only workaround is to softreset the module before disabling it. DRA7x UARTs are compatible to AM437x UARTs in terms of this errata and prescribed workaround. Enable usage of workaround for this errata on DRA7x SoCs. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23serial: 8250_omap: workaround errata around idling UART after using DMASekhar Nori
AM335x, AM437x and DRA7x SoCs have an errata[1] due to which UART cannot be idled after it has been used with DMA. OMAP3 has a similar sounding errata which has been worked around in a2fc36613ac1af2e9 ("ARM: OMAP3: Use manual idle for UARTs because of DMA errata"). But the workaround used there does not apply to AM335x, AM437x SoCs. After using DMA, the UART module on these SoCs must be soft reset to go to idle. This patch implements that errata workaround. It is expected that UART will be used with DMA so no explicit check for DMA usage has been added for errata applicability. MDR1 register needs to be restored right after soft-reset because "UART mode" must be set in that register for module wake-up on AM335x to work. As a result, SCR register is now used to determine if context was lost during sleep. [1] See Advisory 21 in AM437x errata SPRZ408B, updated April 2015. http://www.ti.com/lit/er/sprz408b/sprz408b.pdf Signed-off-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23serial: 8250_omap: introduce "ti,am3352-uart" compatible propertySekhar Nori
Use of of_machine_is_compatible() for handling AM335x specific "DMA kick" quirk in 8250_omap driver makes it ugly to extend the quirk for other platforms. Instead use a new compatible. The new compatible will also make it easier to take care of other quirks on AM335x and like SoCs. In order to not break backward DTB compatibility for users of 8250_omap driver on AM335x based boards, existing use of of_machine_is_compatible() has not been removed. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23serial: 8250_omap: refactor mdr1 updateSekhar Nori
The silicon errata[1] workaround implemented in a follow-on patch, "serial: 8250_omap: workaround errata on disabling UART after using DMA", requires MDR1 register programming. Extract MDR1 register update into helper function, omap8250_update_mdr1() to help with that. [1] Advisory 21 in http://www.ti.com/lit/er/sprz408b/sprz408b.pdf Signed-off-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23Documentation: DT: omap_serial: document missing compatibleSekhar Nori
The compatible "ti,am4372-uart" is used in arch/arm/boot/dts/am4372.dtsi but not documented. Add necessary documentation. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23serial: 8250_omap: fix kernel crash in suspend-to-ramSekhar Nori
omap_device infrastructure has a suspend_noirq hook which runtime suspends all devices late in the suspend cycle (see _od_suspend_noirq() in arch/arm/mach-omap2/omap_device.c) This leads to a NULL pointer exception in 8250_omap driver since by the time omap8250_runtime_suspend() is called, 8250_dma driver has already set rxchan to NULL via serial8250_release_dma(). Make an explicit check to see if rxchan is NULL in runtime_{suspend|resume} hooks to fix this. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23block: Do a full clone when splitting discard biosMartin K. Petersen
This fixes a data corruption bug when using discard on top of MD linear, raid0 and raid10 personalities. Commit 20d0189b1012 "block: Introduce new bio_split()" permits sharing the bio_vec between the two resulting bios. That is fine for read/write requests where the bio_vec is immutable. For discards, however, we need to be able to attach a payload and update the bio_vec so the page can get mapped to a scatterlist entry. Therefore the bio_vec can not be shared when splitting discards and we must do a full clone. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reported-by: Seunguk Shin <seunguk.shin@samsung.com> Tested-by: Seunguk Shin <seunguk.shin@samsung.com> Cc: Seunguk Shin <seunguk.shin@samsung.com> Cc: Jens Axboe <axboe@fb.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: <stable@vger.kernel.org> # v3.14+ Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-23serial/8250_fintek: Support for any io address.Ricardo Ribalda Delgado
Fintek chip can be configured for io addresses different than the standard. Query the chip for the configured addresses and try to match it with the pnp address. Reported-by: Peter Hong <peter_hong@fintek.com.tw> Reviewed-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23serial/8250_fintek: Support keys different than defaultRicardo Ribalda Delgado
Chip can be configured to use entry key different than 0x77. Try all the valid keys until one gives out the right chip id. Reported-by: Peter Hong <peter_hong@fintek.com.tw> Reviewed-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23serial/8250_fintek: Support for chip_ip 0x0501Ricardo Ribalda Delgado
There are some chips with the same interface but different chip ip. Reported-by: Peter Hong <peter_hong@fintek.com.tw> Reviewed-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23serial/8250_fintek: Support for multiple base_portsRicardo Ribalda Delgado
Fintek chip can be connected at address 0x4e and also 0x2e. Add some logic to find out the address of the chip. Reported-by: Peter Hong <peter_hong@fintek.com.tw> Reviewed-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23serial/8250_fintek: Use private data structureRicardo Ribalda Delgado
Save the port index and the line id in a private structure. Reported-by: Peter Hong <peter_hong@fintek.com.tw> Reviewed-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23tty/vt: Fix the memory leak in visual_initDongxing Zhang
If vc->vc_uni_pagedir_loc is not NULL, its refcount needs to be decreased before vc_uni_pagedir_loc is re-assigned. unreferenced object 0xffff88002cdd13b0 (size 512): comm "setfont", pid 503, jiffies 4294896503 (age 722.828s) hex dump (first 32 bytes): 40 92 61 2b 00 88 ff ff 00 00 00 00 00 00 00 00 @.a+............ 00 00 00 00 00 00 00 00 a0 ad 61 2b 00 88 ff ff ..........a+.... backtrace: [<ffffffff817b755e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff811d4898>] kmem_cache_alloc_trace+0x1c8/0x240 [<ffffffff814ae7d3>] con_do_clear_unimap.isra.2+0x83/0xe0 [<ffffffff814ae9b2>] con_clear_unimap+0x22/0x40 [<ffffffff814a8db8>] vt_ioctl+0xeb8/0x1170 [<ffffffff8149b458>] tty_ioctl+0x208/0xca0 [<ffffffff81207858>] do_vfs_ioctl+0x2f8/0x510 [<ffffffff81207af1>] SyS_ioctl+0x81/0xa0 [<ffffffff817ca2b2>] system_call_fastpath+0x16/0x75 [<ffffffffffffffff>] 0xffffffffffffffff unreferenced object 0xffff88002b619240 (size 256): comm "setfont", pid 503, jiffies 4294896503 (age 722.828s) hex dump (first 32 bytes): 90 bc 84 d5 00 88 ff ff 58 85 84 d5 00 88 ff ff ........X....... 88 ac 84 d5 00 88 ff ff e0 b1 84 d5 00 88 ff ff ................ backtrace: [<ffffffff817b755e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff811d4898>] kmem_cache_alloc_trace+0x1c8/0x240 [<ffffffff814ae286>] con_insert_unipair+0x86/0x170 [<ffffffff814af107>] con_set_unimap+0x1b7/0x280 [<ffffffff814a8d65>] vt_ioctl+0xe65/0x1170 [<ffffffff8149b458>] tty_ioctl+0x208/0xca0 [<ffffffff81207858>] do_vfs_ioctl+0x2f8/0x510 [<ffffffff81207af1>] SyS_ioctl+0x81/0xa0 [<ffffffff817ca2b2>] system_call_fastpath+0x16/0x75 [<ffffffffffffffff>] 0xffffffffffffffff Signed-off-by: Dongxing Zhang <dongxing.zhang@intel.com> Signed-off-by: Xiaoming Wang <xiaoming.wang@intel.com> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Tested-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23tty: Convert use of __constant_htons to htonsVaishali Thakkar
In little endian cases, macro htons unfolds to __swab16 which provides special case for constants. In big endian cases, __constant_htons and htons expand directly to the same expression. So, replace __constant_htons with htons with the goal of getting rid of the definition of __constant_htons completely. The semantic patch that performs this transformation is as follows: @@expression x;@@ - __constant_htons(x) + htons(x) Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23serial: amba-pl011: Fix devm_ioremap_resource return value checkKrzysztof Kozlowski
Value returned by devm_ioremap_resource() was checked for non-NULL but devm_ioremap_resource() returns IOMEM_ERR_PTR, not NULL. In case of error this could lead to dereference of ERR_PTR. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Cc: <stable@vger.kernel.org> Fixes: 3873e2d7f63a ("drivers: PL011: refactor pl011_probe()") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23n_tty: signal and flush atomicallyPeter Hurley
When handling signalling char, claim the termios write lock before signalling waiting readers and writers to prevent further i/o before flushing the echo and output buffers. This prevents a userspace signal handler which may output from racing the terminal flush. Reference: Bugzilla #99351 ("Output truncated in ssh session after...") Fixes: commit d2b6f44779d3 ("n_tty: Fix signal handling flushes") Reported-by: Filipe Brandenburger <filbranden@google.com> Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23Input: usbtouchscreen - avoid unresponsive TSC-30 touch screenBernhard Bender
This patch fixes a problem in the usbtouchscreen driver for DMC TSC-30 touch screen. Due to a missing delay between the RESET and SET_RATE commands, the touch screen may become unresponsive during system startup or driver loading. According to the DMC documentation, a delay is needed after the RESET command to allow the chip to complete its internal initialization. As this delay is not guaranteed, we had a system where the touch screen occasionally did not send any touch data. There was no other indication of the problem. The patch fixes the problem by adding a 150ms delay between the RESET and SET_RATE commands. Cc: stable@vger.kernel.org Suggested-by: Jakob Mustafa <jakob.mustafa@bytecmed.com> Signed-off-by: Bernhard Bender <bernhard.bender@bytecmed.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-07-23Merge tag 'iio-fixes-for-4.2c' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: 3rd round of IIO fixes for the 4.2 cycle. * bmc150_magn - add missing regmap dependency and ensure on a wrong chip case report hte chip id rather than a previous return value. * mmc35240 - Fill a null pointer derefrence and wrong SET / RESET logic that results in North and South being swapped. * mlx96014 - correct the offset value reported to userspace (wrong sign) * vf610 - Prevent non aligned register reading. * mcp320x - Another null pointer deference bug. * mma8452 - change threshold type from THRESH to MAG to reflect the fact that the sign of the signal is not known when the event is signaled. * stk3310 - move device registert to end of probe to avoid race conditions when coming up, check for invalid client->irq values and make it work for both endian types of host.
2015-07-23Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull namespace fixes from Eric Biederman: "While reading through the code of detach_mounts I realized the code was slightly off. Testing it revealed two buggy corner cases that can send the code of detach_mounts into an infinite loop. Fixing the code to do the right thing removes the possibility of these user triggered infinite loops in the code" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: mnt: In detach_mounts detach the appropriate unmounted mount mnt: Clarify and correct the disconnect logic in umount_tree
2015-07-23Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds
Pull virtio/vhost fixes from Michael Tsirkin: "Bugfixes and documentation fixes. Igor's patch that allows users to tweak memory table size is borderline, but it does fix known crashes, so I merged it" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost: add max_mem_regions module parameter vhost: extend memory regions allocation to vmalloc 9p/trans_virtio: reset virtio device on remove virtio/s390: rename drivers/s390/kvm -> drivers/s390/virtio MAINTAINERS: separate section for s390 virtio drivers virtio: define virtio_pci_cfg_cap in header. virtio: Fix typecast of pointer in vring_init() virtio scsi: fix unused variable warning vhost: use binary search instead of linear in find_region() virtio_net: document VIRTIO_NET_CTRL_GUEST_OFFLOADS
2015-07-23block: export bio_associate_*() and wbc_account_io()Tejun Heo
bio_associate_blkcg(), bio_associate_current() and wbc_account_io() are used to implement cgroup writeback support for filesystems and thus need to be exported. Export them. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-23Merge tag 'iommu-fixes-v4.2-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: "The fixes include: - a couple of fixes for the new ARM-SMMUv3 driver to fix issues found on the first real implementation of that hardware. - a patch for the Intel VT-d driver to fix a domain-id leak" * tag 'iommu-fixes-v4.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Fix VM domain ID leak iommu/arm-smmu: Skip the execution of CMD_PREFETCH_CONFIG iommu/arm-smmu: Enlarge STRTAB_L1_SZ_SHIFT to support larger sidsize iommu/arm-smmu: Fix the values of ARM64_TCR_{I,O}RGN0_SHIFT iommu/arm-smmu: Fix LOG2SIZE setting for 2-level stream tables iommu/arm-smmu: Fix the index calculation of strtab
2015-07-23drm/amdgpu/cz/dpm: properly report UVD and VCE clock levelsAlex Deucher
VCE, UVD DPM work similarly to SCLK DPM. Report the current clock levels for UVD and VCE via debugfs. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-07-23drm/amdgpu/cz: implement voltage validation properlyAlex Deucher
CZ uses a different set of registers compared to previous asics and supports separate NB and GFX planes. Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-07-23tile: use free_bootmem_late() for initrdChris Metcalf
We were previously using free_bootmem() and just getting lucky that nothing too bad happened. Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com> Cc: stable@vger.kernel.org
2015-07-23mnt: In detach_mounts detach the appropriate unmounted mountEric W. Biederman
The handling of in detach_mounts of unmounted but connected mounts is buggy and can lead to an infinite loop. Correct the handling of unmounted mounts in detach_mount. When the mountpoint of an unmounted but connected mount is connected to a dentry, and that dentry is deleted we need to disconnect that mount from the parent mount and the deleted dentry. Nothing changes for the unmounted and connected children. They can be safely ignored. Cc: stable@vger.kernel.org Fixes: ce07d891a0891d3c0d0c2d73d577490486b809e1 mnt: Honor MNT_LOCKED when detaching mounts Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2015-07-23drm/amdgpu: add VCE harvesting instance queryLeo Liu
Signed-off-by: Leo Liu <leo.liu@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
2015-07-23drm/amdgpu: implement VCE 3.0 harvesting support (v4)Alex Deucher
For boards with bad VCE blocks, only configure the working block. v2: use the harvest info for pipe setup v3: fix mask check as noted by Leo v4: add dGPU support Reviewed-by: Christian König <christian.koenig@amd.com> (v2) Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-07-23drm/amdgpu/dce10: Re-set VBLANK interrupt state when enabling a CRTCMichel Dänzer
This doesn't seem strictly necessary with Tonga right now, but that might change with future power management enhancements. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
2015-07-23drm/amdgpu/dce11: Re-set VBLANK interrupt state when enabling a CRTCMichel Dänzer
Something (ATOM BIOS?) seems to be clobbering the LB_INTERRUPT_MASK register while the CRTC is off, which caused e.g. glxgears or gnome-shell to hang after a modeset. Reviewed-and-Tested-by: Alex Deucher <alexander.deucher@amd.com> Tested-by: Sonny Jiang <sonny.jiang@amd.com> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
generated by cgit v1.2.3 (git 2.39.1) at 2025-08-06 00:48:05 +0000