| Age | Commit message (Collapse) | Author |
|---|
|
Idea is to add helpers for peeking and popping jobs from entities with
the goal of decoupling the hidden assumption in the code that queue_node
is the first element in struct drm_sched_job.
That assumption usually comes in the form of:
while ((job = to_drm_sched_job(spsc_queue_pop(&entity->job_queue))))
Which breaks if the queue_node is re-positioned due to_drm_sched_job
being implemented with a container_of.
This also allows us to remove duplicate definitions of to_drm_sched_job.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250221105038.79665-2-tvrtko.ursulin@igalia.com
|
|
If mhi_fw_load_handler() bails out early because the EE is not capable
of loading firmware, we may reference fw_load_type in cleanup which is
uninitialized at this point. The cleanup code checks fw_load_type as a
proxy for knowing if fbc_image was allocated and needs to be freed, but
we can directly test for that. This avoids the possible uninitialized
access and appears to be clearer code.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/e3148ac4-7bb8-422d-ae0f-18a8eb15e269@stanley.mountain/
Fixes: f88f1d0998ea ("bus: mhi: host: Add a policy to enable image transfer via BHIe in PBL")
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250214162109.3555300-1-quic_jhugo@quicinc.com
|
|
Qualcomm is migrating away from quicinc.com email addresses towards ones
with *.qualcomm.com.
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250219214112.2168604-1-jeff.hugo@oss.qualcomm.com
|
|
As suggested in [0], add a note indicating that
drm_atomic_helper_reset_crtc() can be a no-op in some cases.
[0]:https://lore.kernel.org/all/Z7XfnPGDYspwG42y@phenom.ffwll.local/
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20250220140406.593314-1-herve.codina@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
|
|
This driver uses the enable-gpios property and it is confusing that the
error message refers to reset-gpios. Use the correct name when the
enable GPIO is not found.
Fixes: e2450d32e5fb5 ("drm/panel: ili9882t: Break out as separate driver")
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217120428.3779197-1-jkeeping@inmusicbrands.com
|
|
During the creation of drmm_ variants for writeback connector, one
function was renamed, but not the kernel doc.
To remove the warning, use the proper name in kernel doc.
Fixes: 135d8fc7af44 ("drm: writeback: Create an helper for drm_writeback_connector initialization")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20250207142201.550ce870@canb.auug.org.au/
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250207-b4-fix-warning-v1-1-b4964beb60a3@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
|
|
Move the cursor code into a separate source file for readability. No
functional changes.
v2:
- include <linux/bits.h>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217122336.230067-5-tzimmermann@suse.de
|
|
Add support for cursor image data in ARGB4444 format. This is the
hardware's native format and requires no conversion.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217122336.230067-4-tzimmermann@suse.de
|
|
User-space cursor-image data is encoded in ARBG8888, while hardware
supports ARGB4444. Implement the format conversion as part of the
format-helper framework, so that other drivers can benefit.
This allows to respect the damage area of the cursor update. In
previous code, all cursor image data had to be converted on each
update. Now, only the changed areas require an update. The hardware
image is always updated completely, as it is required for the
checksum update.
The format-conversion helper still contains the old implementation's
optimization of writing 2 output pixels at the same time.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217122336.230067-3-tzimmermann@suse.de
|
|
Setting the cursor image requires a 32-bit checksum of the cursor
image data. The current cursor code converts the image to ARGB4444
format and computes the checksum in a single step. Moving the
checksum calculation into a separate helper will allow to move the
format conversion into a shared helper.
v2:
- don't loop for checksum'ing final pixel (Jocelyn)
- fix typo in commit message (Jocelyn)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217122336.230067-2-tzimmermann@suse.de
|
|
drm_atomic_helper_wait_for_flip_done()
drm_atomic_helper_wait_for_flip_done() will wait for pages flips on all
CRTCs affected by a given commit. It takes the drm_atomic_state being
committed as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-26-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_commit_cleanup_done()
drm_atomic_helper_wait_for_dependencies() is the final part of a commit
and signals it completion. It takes the drm_atomic_state being committed
as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-25-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_cleanup_planes() is one of the final part of a commit,
and will free up all plane resources used in the previous commit. It
takes the drm_atomic_state being committed as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-24-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_wait_for_vblanks() waits for vblank events on all the
CRTCs affected by a commit. It takes the drm_atomic_state being
committed as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-23-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_commit_hw_done() signals hardware completion of a
given commit. It takes the drm_atomic_state being committed as a
parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-22-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_fake_vblank() fake a vblank event if needed when a new
commit is being applied. It takes the drm_atomic_state being committed
as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-21-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_commit_writebacks()
drm_atomic_helper_commit_writebacks() updates all writeback connectors
affected by a new commit. It takes the drm_atomic_state being committed
as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-20-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_bridge_chain_enable() enables all bridges affected by a new
commit. It takes the drm_atomic_state being committed as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-19-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_bridge_chain_pre_enable() enables all bridges affected by
a new commit. It takes the drm_atomic_state being committed as a
parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-18-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_commit_modeset_enables()
drm_atomic_helper_commit_modeset_enables() enables all outputs affected
by a new commit. It takes the drm_atomic_state being committed as a
parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-17-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_commit_planes() updates all planes affected by a new
commit. It takes the drm_atomic_state being committed as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-16-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
crtc_set_mode() deals with calling the modeset related hooks for CRTC,
connectors and bridges if and when a new commit changes them. It takes
the drm_atomic_state being committed as a parameter.
However, that parameter name is called as old_state, which is pretty
confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-15-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_update_legacy_modeset_state()
drm_atomic_helper_update_legacy_modeset_state() updates all the legacy
modeset pointers a connector, encoder or CRTC might have with the ones
being setup by a given commit. It takes the drm_atomic_state being
committed as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-14-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_bridge_chain_post_disable() disables all bridges affected by
a new commit. It takes the drm_atomic_state being committed as a
parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-13-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_bridge_chain_disable() disables all bridges affected by a new
commit. It takes the drm_atomic_state being committed as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-12-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
disable_outputs() disables all connectors and CRTCs affected by a
commit. It takes the drm_atomic_state being committed as a parameter.
However, that parameter name is called as old_state, which is pretty
confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-11-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_modeset_disables() disables all the outputs affected
by a commit. It takes the drm_atomic_state being committed as a
parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-10-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_commit_tail_rpm() is the final part of an atomic
commit, and is given the state being committed as a parameter.
However, that parameter is named old_state, but documented as the "new
modeset state" which is all super confusing.
Let's rename that parameter to state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-9-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_commit_tail() is the final part of an atomic commit,
and is given a parameter with the drm_atomic_state being committed.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-8-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
drm_atomic_helper_wait_for_dependencies()
drm_atomic_helper_wait_for_dependencies() waits for all the dependencies
a commit has before going forward with it. It takes the drm_atomic_state
being committed as a parameter.
However, that parameter name is called (and documented) as old_state,
which is pretty confusing. Let's rename that variable as state.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-7-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Even though the commit_tail () drm_atomic_state parameter is called
old_state, it's actually the state being committed which is confusing.
It's even more confusing since the atomic_commit_tail hook being called
by commit_tail() parameter is called state.
Let's rename the variable from old_state to state to make it less
confusing.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-6-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
It's pretty inconvenient to access the full atomic state from
drm_bridges, so let's change the atomic_post_disable hook prototype to
pass it directly.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-5-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
It's pretty inconvenient to access the full atomic state from
drm_bridges, so let's change the atomic_disable hook prototype to pass
it directly.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-4-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
It's pretty inconvenient to access the full atomic state from
drm_bridges, so let's change the atomic_enable hook prototype to pass it
directly.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-3-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
It's pretty inconvenient to access the full atomic state from
drm_bridges, so let's change the atomic_pre_enable hook prototype to
pass it directly.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-2-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
After some discussions on the mailing-list for an earlier revision of
the series, it was suggested to document the evolution of
drm_atomic_state and its use by drivers to explain some of the confusion
one might still encounter when reading the framework code.
Suggested-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/dri-devel/Z4jtKHY4qN3RNZNG@phenom.ffwll.local/
Reviewed-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20250213-bridge-connector-v3-1-e71598f49c8f@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
If "rpc" is an error pointer then return directly. Otherwise it leads
to an error pointer dereference.
Fixes: 50f290053d79 ("drm/nouveau: support handling the return of large GSP message")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Zhi Wang <zhiw@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/b7052ac0-98e4-433b-ad58-f563bf51858c@stanley.mountain
|
|
This is a DSI bridge, so set the bridge type accordingly.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250120132135.554391-2-alexander.stein@ew.tq-group.com
|
|
This is a DSI to LVDS bridge, so set the bridge type accordingly.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250120132135.554391-1-alexander.stein@ew.tq-group.com
|
|
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_ioremap_resource().
Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250128065645.27140-1-oushixiong1025@163.com
|
|
Backmerging to get bugfixes from v6.14-rc2.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Having an DRM_MODE_CONNECTOR_Unknown connector type is considered bad, and
drm_panel_bridge_add_typed() and derivatives are deprecated for this.
drm_panel_init() won't prevent initializing a panel with a
DRM_MODE_CONNECTOR_Unknown connector type. Luckily there are no in-tree
users doing it, so take this as an opportinuty to document a valid
connector type must be passed.
Returning an error if this rule is violated is not possible because
drm_panel_init() is a void function. Add at least a warning to make any
violations noticeable, especially to non-upstream drivers.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250214-drm-assorted-cleanups-v7-5-88ca5827d7af@bootlin.com
|
|
This function is for panel_bridge instances only. The silent return when
invoked on other bridges might hide actual errors, so avoid them to go
unnoticed.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250214-drm-assorted-cleanups-v7-4-88ca5827d7af@bootlin.com
|
|
drm_panel_bridge_remove() reads bridge->funcs to find out whether this is a
panel bridge or another kind of bridge. drm_bridge_is_panel() is made
exactly for that, so use it.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250214-drm-assorted-cleanups-v7-3-88ca5827d7af@bootlin.com
|
|
This comment is misleading as it refers to one of the inner if() branches
only, not the whole outer if(). Move it to the branch it refers to.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250214-drm-assorted-cleanups-v7-2-88ca5827d7af@bootlin.com
|
|
idx is an unsigned int, use %u for printk-style strings.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250214-drm-assorted-cleanups-v7-1-88ca5827d7af@bootlin.com
|
|
If the clock mhdp->clk was not enabled in cdns_mhdp_probe(), it should not
be disabled in any path.
The return value of clk_prepare_enable() is not checked. If mhdp->clk was
not enabled, it may be disabled in the error path of cdns_mhdp_probe()
(e.g., if cdns_mhdp_load_firmware() fails) or in cdns_mhdp_remove() after
a successful cdns_mhdp_probe() call.
Use the devm_clk_get_enabled() helper function to ensure proper call
balance for mhdp->clk.
Found by Linux Verification Center (linuxtesting.org) with Klever.
Fixes: fb43aa0acdfd ("drm: bridge: Add support for Cadence MHDP8546 DPI/DP bridge")
Signed-off-by: Vitalii Mordan <mordan@ispras.ru>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250214154632.1907425-1-mordan@ispras.ru
|
|
The Intel model of the OneXPlayer Mini uses a 1200x1920 portrait LCD panel.
The DMI strings are the same as the OneXPlayer, which already has a DMI
quirk, but the panel is different.
Add a DMI match to correctly rotate this panel.
Signed-off-by: Andrew Wyatt <fewtarius@steamfork.org>
Co-developed-by: John Edwards <uejji@uejji.net>
Signed-off-by: John Edwards <uejji@uejji.net>
Tested-by: João Pedro Kurtz <joexkurtz@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213222455.93533-6-uejji@uejji.net
|
|
Some GPD Win 2 units shipped with the correct DMI strings.
Add a DMI match to correctly rotate the panel on these units.
Signed-off-by: Andrew Wyatt <fewtarius@steamfork.org>
Signed-off-by: John Edwards <uejji@uejji.net>
Tested-by: Paco Avelar <pacoavelar@hotmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213222455.93533-5-uejji@uejji.net
|
|
The AYANEO Slide uses a 1080x1920 portrait LCD panel. This is the same
panel used on the AYANEO Air Plus, but the DMI data is too different to
match both with one entry.
Add a DMI match to correctly rotate the panel on the AYANEO Slide.
This also covers the Antec Core HS, which is a rebranded AYANEO Slide with
the exact same hardware and DMI strings.
Signed-off-by: Andrew Wyatt <fewtarius@steamfork.org>
Signed-off-by: John Edwards <uejji@uejji.net>
Tested-by: John Edwards <uejji@uejji.net>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213222455.93533-4-uejji@uejji.net
|
