summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-12-06arm64: dts: qcom: sc7180-trogdor: use generic node namesKrzysztof Kozlowski
According to Devicetree specification, the node names should be somewhat generic. Use "amplifier" for max98360a and "-regulator" for fixed regulators. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221203161443.97656-1-krzysztof.kozlowski@linaro.org
2022-12-06arm64: dts: qcom: sm8450-hdk: add sound supportSrinivas Kandagatla
Add sound support to SM8450 HDK board. Tested setup so far is only two speakers (working) and head-phones (only one channel working). Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Co-developed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221202152054.357316-4-krzysztof.kozlowski@linaro.org
2022-12-06arm64: dts: qcom: sm8450: add Soundwire and LPASSSrinivas Kandagatla
Add Soundwire controllers, Low Power Audio SubSystem (LPASS) devices and LPASS pin controller. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Co-developed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221202152054.357316-3-krzysztof.kozlowski@linaro.org
2022-12-06arm64: dts: qcom: sm8450: add GPR nodeSrinivas Kandagatla
Add Generic Packet Router (GPR) device node with ADSP services. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Co-developed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221202152054.357316-2-krzysztof.kozlowski@linaro.org
2022-12-06arm64: dts: qcom: sa8540p-ride: enable PCIe supportBrian Masney
Add the vreg_l11a, pcie3a, pcie3a_phy, and tlmm nodes that are necessary in order to get PCIe working on the QDrive3. This patch also increases the width of the ranges property for the PCIe switch that's found on this platform. Note that this change requires the latest trustzone (TZ) firmware that's available from Qualcomm as of November 2022. If this is used against a board with the older firmware, then the board will go into ramdump mode when PCIe is probed on startup. The ranges property is overridden in this sa8540p-ride.dts file since this is what's used to describe the QDrive3 variant with dual SoCs. There's another variant of this board that only has a single SoC where this change is not applicable, and hence why this specific change was not done in sa8540p.dtsi. These changes were derived from various patches that Qualcomm delivered to Red Hat in a downstream kernel. Signed-off-by: Brian Masney <bmasney@redhat.com> Tested-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221202120918.2252647-1-bmasney@redhat.com
2022-12-06arm64: dts: qcom: sm6115: Add smmu fallback to qcom generic compatibleAdam Skladowski
Add fallback to generic qcom mmu-500 implementation. Signed-off-by: Adam Skladowski <a39.skl@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221130200950.144618-13-a39.skl@gmail.com
2022-12-06arm64: dts: qcom: sm6115: Add WCN nodeAdam Skladowski
Add WCN node to allow using wifi module. Signed-off-by: Adam Skladowski <a39.skl@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221130200950.144618-12-a39.skl@gmail.com
2022-12-06arm64: dts: qcom: sm6115: Add i2c/spi nodesAdam Skladowski
Add I2C/SPI nodes for SM6115. Signed-off-by: Adam Skladowski <a39.skl@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221130200950.144618-11-a39.skl@gmail.com
2022-12-06arm64: dts: qcom: sm6115: Add GPI DMAAdam Skladowski
Add GPI DMA node which will be wired to i2c/spi/uart. Signed-off-by: Adam Skladowski <a39.skl@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221130200950.144618-10-a39.skl@gmail.com
2022-12-06arm64: dts: qcom: sm6115: Add mdss/dpu nodeAdam Skladowski
Add mdss and dpu node to enable display support on SM6115. Signed-off-by: Adam Skladowski <a39.skl@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221130200950.144618-9-a39.skl@gmail.com
2022-12-06arm64: dts: qcom: sm6115: Add dispcc nodeAdam Skladowski
Add display clock controller to allow controlling display related clocks. Signed-off-by: Adam Skladowski <a39.skl@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> [bjorn: Pushed dsi_phy reference into next patch] Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221130200950.144618-8-a39.skl@gmail.com
2022-12-06arm64: dts: qcom: sm6115: Add rpm-stats nodeAdam Skladowski
Add rpm stats node. Signed-off-by: Adam Skladowski <a39.skl@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221130200950.144618-7-a39.skl@gmail.com
2022-12-06arm64: dts: qcom: sm6115: Add PRNG nodeAdam Skladowski
Add a node for the PRNG to enable hw-accelerated pseudo-random number generation. Signed-off-by: Adam Skladowski <a39.skl@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221130200950.144618-6-a39.skl@gmail.com
2022-12-06arm64: dts: qcom: sm6115: Add TSENS nodeAdam Skladowski
Add nodes required for TSENS block using the common qcom,tsens-v2 binding. Signed-off-by: Adam Skladowski <a39.skl@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221130200950.144618-5-a39.skl@gmail.com
2022-12-06arm64: dts: qcom: sm6115: Add cpufreq-hw supportAdam Skladowski
Add cpufreq-hw node and assign qcom,freq-domain properties to CPUs to enable CPU clock scaling. Signed-off-by: Adam Skladowski <a39.skl@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221130200950.144618-4-a39.skl@gmail.com
2022-12-06arm64: dts: qcom: msm8916-wingtech-wt88047: Add flash LEDLin, Meng-Bo
WT88047 uses OCP 8110 Flash LED driver. Add it to the device tree. Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221128051512.125148-1-linmengbo0689@protonmail.com
2022-12-06arm64: dts: qcom: align LED node names with dtschemaKrzysztof Kozlowski
The node names should be generic and DT schema expects certain pattern: qcom/msm8998-oneplus-cheeseburger.dtb: leds: 'button-backlight' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' qcom/sc7180-trogdor-coachz-r1.dtb: pwmleds: 'keyboard-backlight' does not match any of the regexes: '^led(-[0-9a-f]+)?$', 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221125144209.477328-1-krzysztof.kozlowski@linaro.org
2022-12-06arm64: dts: qcom: add SA8540P ride(Qdrive-3)Parikshit Pareek
Introduce the Qualcomm SA8540P ride automotive platform, also known as Qdrive-3 development board. This initial contribution supports SMP, CPUFreq, cluster idle, UFS, RPMh regulators, debug UART, PMICs, remoteprocs and USB. The SA8540P ride contains four PM8450 PMICs. A separate DTSI file has been created for PMIC, so that it can be used for future SA8540P based boards. Signed-off-by: Parikshit Pareek <quic_ppareek@quicinc.com> Tested-by: Brian Masney <bmasney@redhat.com> Reviewed-by: Brian Masney <bmasney@redhat.com> Tested-by: Eric Chanudet <echanude@redhat.com> Reviewed-by: Eric Chanudet <echanude@redhat.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221118025158.16902-3-quic_ppareek@quicinc.com
2022-12-06arm64: dts: qcom: sm8450-nagara: Add gpio line names for TLMMKonrad Dybcio
Sony ever so graciously provides GPIO line names in their downstream kernel (though sometimes they are not 100% accurate and you can judge that by simply looking at them and with what drivers they are used). Add these to the PDX223&224 DTSIs to better document the hardware. Diff between 223 and 224: < gpio-line-names = "NC", /* GPIO_0 */ < "NC", < "NC", < "NC", > gpio-line-names = "TELE_SPI_MISO", /* GPIO_0 */ > "TELE_SPI_MOSI", > "TELE_SPI_CLK", > "TELE_SPI_CS_N", < "PM8010_2_RESET_N", > "NC", < "NC", > "UWIDEC_PWR_EN", < "TOF_RST_N", > "NC" < "QLINK1_REQ", < "QLINK1_EN", /* GPIO_160 */ < "QLINK1_WMSS_RESET_N", > "NC", > "NC", /* GPIO_160 */ > "NC", The tele lens setup is different on 1 IV and 5 IV and power wiring is different for some lenses, so it makes sense. As for QLINK, no idea. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221117141613.19942-1-konrad.dybcio@linaro.org
2022-12-06arm64: dts: qcom: msm8994: Drop spi-max-frequency from SPI hostKonrad Dybcio
This is a device property, not a bus host one. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221117105845.13644-1-konrad.dybcio@linaro.org
2022-12-06arm64: dts: qcom: sm8450: Supply clock from cpufreq node to CPUsManivannan Sadhasivam
Qualcomm platforms making use of CPUFreq HW Engine (EPSS/OSM) supply clocks to the CPU cores. But this relationship is not represented in DTS so far. So let's make cpufreq node as the clock provider and CPU nodes as the consumers. The clock index for each CPU node is based on the frequency domain index. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221117053145.10409-3-manivannan.sadhasivam@linaro.org
2022-12-06arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Add vision mezzanineBryan O'Donoghue
The Vision Mezzanine for the RB5 ships with an imx577 and ov9282 populated. Other sensors and components may be added or stacked with additional mezzanines. Enable the IMX577 on the vision mezzanine. An example media-ctl pipeline for the imx577 is: media-ctl --reset media-ctl -v -d /dev/media0 -V '"imx577 '22-001a'":0[fmt:SRGGB10/4056x3040 field:none]' media-ctl -V '"msm_csiphy2":0[fmt:SRGGB10/4056x3040]' media-ctl -V '"msm_csid0":0[fmt:SRGGB10/4056x3040]' media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4056x3040]' media-ctl -l '"msm_csiphy2":1->"msm_csid0":0[1]' media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]' yavta -B capture-mplane -c -I -n 5 -f SRGGB10P -s 4056x3040 -F /dev/video0 Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221117003232.589734-8-bryan.odonoghue@linaro.org
2022-12-06arm64: dts: qcom: sm8250: camss: Define ports and ports address/size cellsBryan O'Donoghue
Define the set of possible ports, one for each CSI PHY along with the port address and size cells @ the SoC dtsi level. Suggested-by: Konrad Dybcio <konrad.dybcio@somainline.org> Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221117003232.589734-7-bryan.odonoghue@linaro.org
2022-12-06arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: Add navigation ↵Bryan O'Donoghue
mezzanine dts Move the dts data for the rb3 navigation mezzanine into its own dts file. Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221117003232.589734-6-bryan.odonoghue@linaro.org
2022-12-06arm64: dts: qcom: sdm845-db845c: Use okay not ok, disabled not disable for ↵Bryan O'Donoghue
status Use preferred "ok" not "okay". Use preferred status "disabled" instead of "disable". There's no functional change here so no Fixes has been applied. Reported-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221117003232.589734-5-bryan.odonoghue@linaro.org
2022-12-06arm64: dts: qcom: sdm845-db845c: Drop redundant reg = in portBryan O'Donoghue
The reg for the port is specified in the dtsi. Remove from the db845c dts. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221117003232.589734-4-bryan.odonoghue@linaro.org
2022-12-06arm64: dts: qcom: sdm845-db845c: Drop redundant address-cells, size-cells ↵Bryan O'Donoghue
declaration sdm845.dtsi camss already defines the address-cells and size-cells for camss, no need to replicate in sdm845-db845c.dts. Reported-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221117003232.589734-3-bryan.odonoghue@linaro.org
2022-12-06arm64: dts: qcom: sdm845: Define the number of available portsBryan O'Donoghue
The number of available ports is SoC specific so we should define it in the SoC dtsi. For the case of the sdm845 that is 4 CSI PHYs => four ports. Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221117003232.589734-2-bryan.odonoghue@linaro.org
2022-12-06arm64: dts: qcom: sm8350-sagami: Wire up SDHCI2Konrad Dybcio
Adjust regulators, add required pin setup and finally enable SDHCI2 to get the SD Card slot going on Sagami Xperias. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221116123612.34302-4-konrad.dybcio@linaro.org
2022-12-06arm64: dts: qcom: sm8350-sagami: Add GPIO line names for TLMMKonrad Dybcio
Sony ever so graciously provides GPIO line names in their downstream kernel (though sometimes they are not 100% accurate and you can judge that by simply looking at them and with what drivers they are used). Add these to the Sagami-common / PDX215 DTSIs to better document the hardware. Diff between 215 and common: < "NC", < "NC", > "WLC_I2C_SDA", > "WLC_I2C_SCL", < "NC", > "WLC_INT_N", > "CAM_MCLK4", < "NC", < "NC", > "TOF_RST_N", < "NC", < "NC", < "NC", > "QLINK1_REQ", > "QLINK1_EN", > "QLINK1_WMSS_RESET_N", It's pretty logical as 1 III has WLC (WireLess Charging), and an additional 3D iToF sensor. As for QLINK, no idea. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221116123612.34302-3-konrad.dybcio@linaro.org
2022-12-06arm64: dts: qcom: sm8350: Add SDHCI2Konrad Dybcio
Add and configure the SDHCI host responsible for (mostly) SD Card and its corresponding pins' sleep states. The setup is *literally* 1:1 with 8450 (bar SDR50/104 may not be broken). Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221116123612.34302-2-konrad.dybcio@linaro.org
2022-12-06arm64: dts: qcom: clean up 'regulator-allowed-modes' indentationJohan Hovold
When recently adding the missing 'regulator-allowed-modes' properties it appears that the binding example with its four-spaces indentation (corresponding to a single tab, which is still to little) was copied verbatim. Drop the unnecessary first line break after 'regulator-allowed-modes' properties and indent the single remaining continuation line properly. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221116102054.4673-3-johan+linaro@kernel.org
2022-12-06arm64: dts: qcom: sc7280: Remove unused sleep pin control nodesSrinivasa Rao Mandadapu
Remove unused and redundant sleep pin control entries as they are not referenced anywhere in sc7280 based platform's device tree variants. Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com> Reported-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/1668591184-21099-1-git-send-email-quic_srivasam@quicinc.com
2022-12-06arm64: dts: qcom: pmk8350: Specify PBS register for PONKonrad Dybcio
PMK8350 is the first PMIC to require both HLOS and PBS registers for PON to function properly (at least in theory, sm8350 sees no change). The support for it on the driver side has been added long ago, but it has never been wired up. Do so. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221115132626.7465-1-konrad.dybcio@linaro.org
2022-12-06arm64: dts: qcom: sm8150: Use defines for power domain indicesKonrad Dybcio
Use the defines from qcom-rpmpd.h instead of bare numbers for readability. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221115130936.6830-2-konrad.dybcio@linaro.org
2022-12-06arm64: dts: qcom: sm8450: Use defines for power domain indicesKonrad Dybcio
Use the defines from qcom-rpmpd.h instead of bare numbers for readability. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221115130936.6830-1-konrad.dybcio@linaro.org
2022-12-06arm64: dts: qcom: sm6375-pdx225: Enable ADSP & CDSPKonrad Dybcio
Enable the newly added remote processors and assign them a firmware path. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221114105913.37044-4-konrad.dybcio@linaro.org
2022-12-06arm64: dts: qcom: sm6375: Add ADSP&CDSPKonrad Dybcio
Add ADSP & CDSP remote processors. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221114105913.37044-3-konrad.dybcio@linaro.org
2022-12-06arm64: dts: qcom: sm6375: Add SMP2P for ADSP&CDSPKonrad Dybcio
Add nodes for ADSP&CDSP SMP2P. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221114105913.37044-2-konrad.dybcio@linaro.org
2022-12-06arm64: dts: qcom: sm6375-pdx225: Enable SD card slotKonrad Dybcio
Set SDHCI VMMC/VQMMC to <=2v96 and allow load setting by the SDHCI driver, as required by this use case. Configure the SD Card Detect pin, enable the SDHCI2 controller and assign it the aforementioned regulators. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221114105043.36698-4-konrad.dybcio@linaro.org
2022-12-06arm64: dts: qcom: sm6375-pdx225: Configure Samsung touchscreenKonrad Dybcio
Add a pretty bog-standard-for-Xperias-for-the-past-3-years touchscreen setup. The OEM that built the Xperia 10 IV for SONY decided to use some kind of a GPIO regulator that needs to be enabled at all times for both the touch panel and the display panel to function. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221115152727.9736-10-konrad.dybcio@linaro.org
2022-12-06arm64: dts: qcom: sm6375-pdx225: Configure SMD RPM regulatorsKonrad Dybcio
Configure regulators present on the Xperia 10 IV that are reachable via SMD RPM. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221115152727.9736-9-konrad.dybcio@linaro.org
2022-12-06arm64: dts: qcom: sm6375-pdx225: Add PMIC peripheralsKonrad Dybcio
Add and enable PMIC peripherals for PM6125, PMR735a and PMK8350 on the Xperia 10 IV. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221115152727.9736-8-konrad.dybcio@linaro.org
2022-12-06arm64: dts: qcom: sm6375-pdx225: Enable QUPs & GPI DMAKonrad Dybcio
Enable QUPs & GPI DMA on the Xperia 10 IV. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221115152727.9736-7-konrad.dybcio@linaro.org
2022-12-06arm64: dts: qcom: sm6375: Add SDHCI2Konrad Dybcio
Configure the second SDHCI bus controller, which usually the interface used for SD cards. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221114105043.36698-3-konrad.dybcio@linaro.org
2022-12-06arm64: dts: qcom: sm6375: Add QUPs and corresponding SPI/I2C hostsKonrad Dybcio
Add necessary nodes to support various QUP configurations. Note that: - QUP3/4/5 and 11 are straight up missing - There may be more QUPs physically on the SoC that work perfectly fine, but Qualcomm decided not to expose them on the downstream kernel - Many are missing pinctrls, as there are both missing pin funcs in the TLMM driver and missing configuration settings (though they are possible to guesstimate quite easily) Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221115152727.9736-6-konrad.dybcio@linaro.org
2022-12-06arm64: dts: qcom: sm6375: Add pin configs for some QUP configurationsKonrad Dybcio
Add the pin setup for SPI/I2C configurations that are supported downstream. I can guesstimate the correct settings for other buses, but: - I have no hardware to test it on - Some QUPs are straight up missing pin funcs in TLMM - Vendors probably didn't really care and used whatever was there in the reference design and BSP - should any other be used, they can be configured at a later time Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221115152727.9736-5-konrad.dybcio@linaro.org
2022-12-06arm64: dts: qcom: sm6375: Add GPI DMA nodesKonrad Dybcio
Add nodes for GPI DMA hosts on SM6375. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221115152727.9736-4-konrad.dybcio@linaro.org
2022-12-06arm64: dts: qcom: pmk8350: Allow specifying arbitrary SIDKonrad Dybcio
PMK8350 is shipped on SID6 with some SoCs, for example with SM6375. Add some preprocessor logic to allow changing the SID in cases like this. While I am not in favour of adding #if's into the device tree, this is the least messy way to handle this. If one isn't specified, it will default to 0 (as it has been previously). Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221115152727.9736-3-konrad.dybcio@linaro.org
2022-12-06arm64: dts: qcom: sm8450-nagara: Add Samsung touchscreenKonrad Dybcio
Add device node and required pinctrl settings (as well as a fixup for an existing one, whoops!) to support the Samsung Electronics touchscreen on Nagara devices. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221114095654.34561-4-konrad.dybcio@linaro.org
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-28 23:03:16 +0000