summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2022-11-09arm64: dts: qcom: Add power-domains property for apps_rscMaulik Shah
Add power-domains property which allows apps_rsc device to attach to cluster power domain on sm8150, sm8250, sm8350 and sm8450. Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # SM8450 Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221018152837.619426-4-ulf.hansson@linaro.org
2022-11-07arm64: dts: qcom: msm8996: change order of SMMU clocks on this platformDmitry Baryshkov
Change order of SMMU clocks to match the schema. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221102184420.534094-2-dmitry.baryshkov@linaro.org
2022-11-07arm64: dts: qcom: sdm632: fairphone-fp3: add touchscreenJob Noorman
Add Himax hx83112b touchscreen to the FP3 DT. Signed-off-by: Job Noorman <job@noorman.info> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221107105604.26541-4-job@noorman.info
2022-11-07arm64: dts: qcom: Add device tree for Sony Xperia 10 IVKonrad Dybcio
Add support for Sony Xperia 10 IV, a.k.a PDX225. This device is a part of the SoMC SM6375 Murray platform and currently it is the only device based on that board, so no -common DTSI is created until (if?) other Murray devices appear. This commit brings support for: * USB (only USB2 for now) * Display via simplefb To create a working boot image, you need to run: cat arch/arm64/boot/Image.gz arch/arm64/boot/dts/qcom/sm6375-sony-xperia-\ murray-pdx225.dtb > .Image.gz-dtb mkbootimg \ --kernel .Image.gz-dtb \ --ramdisk some_initrd.img \ --pagesize 4096 \ --base 0x0 \ --kernel_offset 0x8000 \ --ramdisk_offset 0x1000000 \ --tags_offset 0x100 \ --cmdline "SOME_CMDLINE" \ --dtb_offset 0x1f00000 \ --header_version 1 \ --os_version 12 \ --os_patch_level 2022-04 \ # or newer -o boot.img-sony-xperia-pdx225 Then, you need to flash it on the device and get rid of all the vendor_boot/dtbo mess: First, you need to get rid of vendor_boot. However, the bootloader is utterly retarded and it will not let you neither flash nor erase it. There are a couple ways to handle this: you can either dd /dev/zero to it from Android (if you have root) or a custom recovery or from fastbootd (fastboot/adb reboot fastboot). You will not be able to boot Android images on your phone unless you lock the bootloader (fastboot oem lock) and restore the factory image with Xperia Companion Windows-and-macOS-only software. The best way so far is probably to use the second (_b) slot and flash mainline there. This will however require you to flash some partitions manually, as they are not populated from factory: (boot_b, dtbo_b, vendor_boot_b, vbmeta_b, vbmeta_system_b) - these we don't really care about as we nuke/replace them (dsp_b, imagefv_b, modem_b, oem_b, rdimage_b) - these you NEED to populate to get a successful boot on slot B, otherwise you will have limited / no functionality. To switch slots, simply run: fastboot --set-active=a //or =b The rest assumes you are on slot A. // You have to either pull vbmeta{"","_system"} from // /dev/block/bootdevice/by-name/ or build one as a part of AOSP fastboot --disable-verity --disable-verification flash vbmeta_b vbmeta.img fastboot --disable-verity --disable-verification flash vbmeta_system_b \ vbmeta_system.img fastboot flash boot_b boot.img-sony-xperia-pdx225 fastboot reboot fastboot // entering fastbootd fastboot flash vendor_boot_b emptything.img fastboot flash dtbo_b emptything.img fastboot reboot bootloader // entering bootloader fastboot fastboot --set-active=b fastboot reboot // mainline time! Where emptything.img is a tiny file that consists of 2 bytes (all zeroes), doing a "fastboot erase" won't cut it, the bootloader will go crazy and things will fall apart when it tries to overlay random bytes from an empty partition onto a perfectly good appended DTB. From there on you can flash new mainline builds by simply flashing boot.img that you create after each kernel rebuild. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221107120920.12593-4-konrad.dybcio@linaro.org
2022-11-07arm64: dts: qcom: Add initial device tree for SM6375Konrad Dybcio
Add an initial device tree for the SM6375 (SD695) SoC. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221107120920.12593-3-konrad.dybcio@linaro.org
2022-11-07dt-bindings: arm: cpus: Add Kryo 660 CPUsKonrad Dybcio
Add a compatible for Kryo 660 CPUs found in at least Qualcomm SM6375. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221107120920.12593-1-konrad.dybcio@linaro.org
2022-11-07arm64: dts: qcom: sc7180: Fully describe fingerprint node on TrogdorStephen Boyd
Update the fingerprint node on Trogdor to match the fingerprint DT binding. This will allow us to drive the reset and boot gpios from the driver when it is re-attached after flashing. We'll also be able to boot the fingerprint processor if the BIOS isn't doing it for us. Cc: Douglas Anderson <dianders@chromium.org> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Alexandru M Stan <amstan@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221107191535.624371-3-swboyd@chromium.org
2022-11-07arm64: dts: qcom: sc7280: Fully describe fingerprint node on HerobrineStephen Boyd
Update the fingerprint node on Herobrine to match the fingerprint DT binding. This will allow us to drive the reset and boot gpios from the driver when it is re-attached after flashing. We'll also be able to boot the fingerprint processor if the BIOS isn't doing it for us. Cc: Douglas Anderson <dianders@chromium.org> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Alexandru M Stan <amstan@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221107191535.624371-2-swboyd@chromium.org
2022-11-07arm64: dts: qcom: sm6125: Enable Command Queue Engine (CQE) for SDHCI 1Marijn Suijten
Downstream sources confirm sm6125 supports CQE, and after fixing the reg name for this range [1] this feature probes and enables correctly: [ 0.391950] sdhci_msm 4744000.mmc: mmc0: CQE init: success [1]: https://lore.kernel.org/all/20221026163646.37433-1-krzysztof.kozlowski@linaro.org/ Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221107214702.311271-1-marijn.suijten@somainline.org
2022-11-07arm64: dts: qcom: sm6125: fix SDHCI CQE reg namesKrzysztof Kozlowski
SM6125 comes with SDCC (SDHCI controller) v5, so the second range of registers is cqhci, not core. Fixes: cff4bbaf2a2d ("arm64: dts: qcom: Add support for SM6125") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Tested-by: Marijn Suijten <marijn.suijten@somainline.org> # Sony Xperia 10 II Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221026163646.37433-1-krzysztof.kozlowski@linaro.org
2022-11-07arm64: dts: qcom: pm8998: adjust coincell node name to bindingsLuca Weiss
The spmi-pmic bindings say that pm8941-coincell should be called 'charger'. Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221031175119.939860-3-luca@z3ntu.xyz
2022-11-07arm64: dts: qcom: pm6150/l/pm7325/pms405: Fix up commentsKonrad Dybcio
Make sure all multiline C-style commends begin with just '/*' with the comment text starting on a new line. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221107145522.6706-12-konrad.dybcio@linaro.org
2022-11-07arm64: dts: qcom: qcs404-*: Fix up commentsKonrad Dybcio
Switch '//' comments to C-style /* */. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221107145522.6706-11-konrad.dybcio@linaro.org
2022-11-07arm64: dts: qcom: msm8994-*: Fix up commentsKonrad Dybcio
Make sure all multiline C-style commends begin with just '/*' with the comment text starting on a new line. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221107145522.6706-10-konrad.dybcio@linaro.org
2022-11-07arm64: dts: qcom: msm8992-*: Fix up commentsKonrad Dybcio
Make sure all multiline C-style commends begin with just '/*' with the comment text starting on a new line. Also, trim off downstream regulator properties from comments to prevent them from accidentally landing into mainline one day.. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221107145522.6706-9-konrad.dybcio@linaro.org
2022-11-07arm64: dts: qcom: ipq8074-*: Fix up commentsKonrad Dybcio
Make sure all multiline C-style commends begin with just '/*' with the comment text starting on a new line. Also, fix up some whitespace within comments. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221107145522.6706-8-konrad.dybcio@linaro.org
2022-11-07arm64: dts: qcom: sdm845-*: Fix up commentsKonrad Dybcio
Switch '//' comments to C-style /* */. Make sure all multiline C-style commends begin with just '/*' with the comment text starting on a new line. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221107145522.6706-7-konrad.dybcio@linaro.org
2022-11-07arm64: dts: qcom: sc8280xp-x13s: Fix up commentsKonrad Dybcio
Switch '//' comments to C-style /* */. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221107145522.6706-6-konrad.dybcio@linaro.org
2022-11-07arm64: dts: qcom: msm8998-*: Fix up commentsKonrad Dybcio
Switch '//' comments to C-style /* */ and fix up the contents of some. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221107145522.6706-5-konrad.dybcio@linaro.org
2022-11-07arm64: dts: qcom: msm8953: Fix up commentsKonrad Dybcio
Switch '//' comments to C-style /* */ and fix up the contents of some. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221107145522.6706-4-konrad.dybcio@linaro.org
2022-11-07arm64: dts: qcom: msm/apq8x96-*: Fix up commentsKonrad Dybcio
Switch '//' comments to C-style /* */ and fix up the contents of some. Make sure all multiline C-style commends begin with just '/*' with the comment text starting on a new line. Also, fix up a single raw '2' to PM8994_GPIO_S4 while at it. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221107145522.6706-3-konrad.dybcio@linaro.org
2022-11-07arm64: dts: qcom: msm/apq8x16-*: Fix up commentsKonrad Dybcio
Switch '//' comments to C-style /* */ and fix up the contents of some. Make sure all multiline C-style commends begin with just '/*' with the comment text starting on a new line. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221107145522.6706-2-konrad.dybcio@linaro.org
2022-11-07arm64: dts: qcom: qcs404: align TLMM pin configuration with DT schemaKrzysztof Kozlowski
DT schema expects TLMM pin configuration nodes to be named with '-state' suffix and their optional children with '-pins' suffix. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221104161131.57719-1-krzysztof.kozlowski@linaro.org
2022-11-07arm64: dts: qcom: hk01: use GPIO flags for tlmmRobert Marko
Use respective GPIO_ACTIVE_LOW/HIGH flags for tlmm GPIOs instead of harcoding the cell value. Signed-off-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221107092930.33325-3-robimarko@gmail.com
2022-11-07arm64: dts: qcom: hk10: use GPIO flags for tlmmRobert Marko
Use respective GPIO_ACTIVE_LOW/HIGH flags for tlmm GPIOs instead of harcoding the cell value. Signed-off-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221107092930.33325-2-robimarko@gmail.com
2022-11-07arm64: dts: qcom: hk10: use "okay" instead of "ok"Robert Marko
Use "okay" instead of "ok" in USB nodes as "ok" is deprecated. Signed-off-by: Robert Marko <robimarko@gmail.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221107092930.33325-1-robimarko@gmail.com
2022-11-07MAINTAINERS: Update Konrad Dybcio's email addressKonrad Dybcio
Use my new Linaro address in place of my SoMainline one. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221107092207.5832-1-konrad.dybcio@linaro.org
2022-11-07arm64: dts: qcom: sc8280xp: fix USB MP QMP PHY nodesJohan Hovold
Update the USB MP QMP PHY nodes to match the new binding which specifically includes the missing register regions (e.g. PCS_USB). Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Andrew Halaney <ahalaney@redhat.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221107081705.18446-1-johan+linaro@kernel.org
2022-11-07arm64: dts: qcom: sc7280: sort out the "Status" to last property with ↵Sheng-Liang Pan
sc7280-herobrine-audio-rt5682.dtsi To keep diffs clean, sort out "Status" to last property. Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221107173954.v11.5.I4c6d97e6f3cf8cdc691d2d4519883c3018dd4372@changeid
2022-11-07arm64: dts: qcom: sc7280: add sc7280-herobrine-audio-rt5682-3mic3.dtsi for ↵Sheng-Liang Pan
evoker add specific 3mic setting as sc7280-herobrine-audio-rt5682-3mic.dtsi, so we can include sc7280-herobrine-audio-rt5682-3mic.dtsi for evoker as it uses rt5682 with 3 mics. Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221107173954.v11.4.I9718ac3622fa550e432209ae5c95c87b873a0f87@changeid
2022-11-07arm64: dts: qcom: sc7280: Add touchscreen and touchpad support for evokerSheng-Liang Pan
Change touchpad and touchscreen node for evoker Touchpad: SA461D-1011 Touchscreen: GT7986U Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221107173954.v11.3.I3ac715e729f6f9b5a3e3001b155df4f9d14e6186@changeid
2022-11-07arm64: dts: qcom: sc7280: Add LTE SKU for sc7280-evoker familySheng-Liang Pan
evoker have wifi/lte sku, add different dts for each sku. Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221107173954.v11.2.If03e9e85e63ece4b1599db841c90ed785c47a4be@changeid
2022-11-07arm64: dts: qcom: pm8150b: change vbus-regulator node nameLuca Weiss
Use the node name as now defined in the spmi-pmic bindings. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221031173933.936147-3-luca@z3ntu.xyz
2022-11-07arm64: dts: qcom: ipq8074: pass XO and sleep clocks to GCCRobert Marko
Pass XO and sleep clocks to the GCC controller so it does not have to find them by matching globaly by name. If not passed directly, driver maintains backwards compatibility by then falling back to global lookup. Since we are here, set cell numbers in decimal instead of hex. Signed-off-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221030175703.1103224-3-robimarko@gmail.com
2022-11-07arm64: dts: qcom: msm8996: use dsi1_phy for the MMCC's dsi1 clocksDmitry Baryshkov
Link dsi1_phy as a clock provider of "dsi1pll" and "dsi1pllbyte" clocks to the MMCC. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221030161612.95471-2-dmitry.baryshkov@linaro.org
2022-11-07arm64: dts: qcom: msm8996: use hdmi_phy for the MMCC's hdmipll clockDmitry Baryshkov
Link hdmi_phy as a clock provider of "hdmipll" clock to the MMCC. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221030161612.95471-1-dmitry.baryshkov@linaro.org
2022-11-07arm64: dts: qcom: sm6350: Add apps_smmu with streamID to SDHCI 1/2 nodesMarijn Suijten
When enabling the APPS SMMU the mainline driver reconfigures the SMMU from its bootloader configuration, losing the stream mapping for (among which) the SDHCI hardware and breaking its ADMA feature. This feature can be disabled with: sdhci.debug_quirks=0x40 But it is of course desired to have this feature enabled and working through the SMMU. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Luca Weiss <luca.weiss@fairphone.com> Tested-by: Luca Weiss <luca.weiss@fairphone.com> # sm7225-fairphone-fp4 Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221030073232.22726-11-marijn.suijten@somainline.org
2022-11-07arm64: dts: qcom: sm6350-lena: Configure Samsung touchscreenMarijn Suijten
Use the generic samsung,s6sy761 touchscreen driver for this device, together with a few pins and regulators to power it up correctly. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221030073232.22726-10-marijn.suijten@somainline.org
2022-11-07arm64: dts: qcom: sm6350-lena: Enable QUP and GPI DMAMarijn Suijten
Enable QUP and GPI DMA hardware to be able to add functioning I2C nodes later. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221030073232.22726-9-marijn.suijten@somainline.org
2022-11-07arm64: dts: qcom: sm6350-lena: Provide power to SDHCI 2 (SDCard slot)Marijn Suijten
Without power the SDCard slot / hardware remains dormant. Like many other platforms these regulators are used exclusively by SDHCI, and have their maximum voltage decreased to what downstream sets on the consumer side. Additionally the SDHCI driver supports setting a load, for which the regulator definition is extended much the same. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221030073232.22726-8-marijn.suijten@somainline.org
2022-11-07arm64: dts: qcom: sm6350-lena: Define pm6350 and pm6150l regulatorsMarijn Suijten
This regulator configuration was adopted from downstream, and is identical to the sm7225 FairPhone 4 configuration bar pm6350_l8a. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221030073232.22726-7-marijn.suijten@somainline.org
2022-11-07arm64: dts: qcom: sm6350-lena: Include pm6350 and configure buttonsMarijn Suijten
Include pm6350 to inherit its GPIO and button configuration, and configure "resin" to serve as volume up, and gpio2 as volume down. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221030073232.22726-6-marijn.suijten@somainline.org
2022-11-07arm64: dts: qcom: pm6350: Include header for KEY_POWERMarijn Suijten
Make pm6350.dtsi self-contained by including input.h, needed for the KEY_POWER constant used to define the power key. Fixes: d8a3c775d7cd ("arm64: dts: qcom: Add PM6350 PMIC") Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Luca Weiss <luca.weiss@fairphone.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221030073232.22726-5-marijn.suijten@somainline.org
2022-11-07arm64: dts: qcom: sm6350-lena: Add SD Card Detect to sdc2 on/off pinctrlMarijn Suijten
In addition to the sdc2 pins, set the SD Card Detect pin in a sane state to be used as an interrupt when an SD Card is slotted in or removed. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221030073232.22726-4-marijn.suijten@somainline.org
2022-11-07arm64: dts: qcom: sm6350: Add pinctrl for SDHCI 2Marijn Suijten
Use the generic pin functions specifically for sdc2. Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Luca Weiss <luca.weiss@fairphone.com> Tested-by: Luca Weiss <luca.weiss@fairphone.com> # sm7225-fairphone-fp4 Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221030073232.22726-3-marijn.suijten@somainline.org
2022-11-07arm64: dts: qcom: sm6350: Add resets for SDHCI 1/2Marijn Suijten
Make sure the SDHCI hardware is properly reset before interacting with it, to protect against any possibly indeterminate state left by the bootloader. Suggested-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Luca Weiss <luca.weiss@fairphone.com> Tested-by: Luca Weiss <luca.weiss@fairphone.com> # sm7225-fairphone-fp4 Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221030073232.22726-2-marijn.suijten@somainline.org
2022-11-07arm64: dts: qcom: pm6150l: add temp sensor and thermal zone configLuca Weiss
Add temp-alarm device tree node and a default configuration for the corresponding thermal zone for this PMIC. Temperatures are based on downstream values, except for trip2 where 125°C is used instead of 145°C due to limitations without a configured ADC. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221028075405.124809-2-luca.weiss@fairphone.com
2022-11-07arm64: dts: qcom: pm6350: add temp sensor and thermal zone configLuca Weiss
Add temp-alarm device tree node and a default configuration for the corresponding thermal zone for this PMIC. Temperatures are based on downstream values, except for trip2 where 125°C is used instead of 145°C due to limitations without a configured ADC. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221028075405.124809-1-luca.weiss@fairphone.com
2022-11-07arm64: dts: qcom: sc7280: Villager doesn't have NVMEDouglas Anderson
The sc7280-herobrine-villager derivative doesn't have NVME enabled so we shouldn't mark the PCIe nodes as "okay" since they're just for boards that have NVME. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221025164915.1.I38e2545eda2b3bd3fef6b41c98f451e32851ae70@changeid
2022-11-07arm64: dts: qcom: Remove fingerprint node from herobrine-r1Stephen Boyd
It turns out that only a few people have the fingerprint sensor hooked up on their board. Leaving this enabled is slowing down boot for everyone else because the driver slowly fails to probe while trying to communicate with a sensor that isn't there. Remove the node to speed up boot, developers with the board can manually enable it themselves. Reported-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221025180703.1806234-1-swboyd@chromium.org
generated by cgit v1.2.3 (git 2.39.1) at 2025-07-29 04:10:00 +0000